Transcript
Manual Premium Builder Version 1.0
“We all become builders”
Builder Premium Specifications Printing
Printer
Print technology
FDM / FFF Fused Deposition Method
Weight:
Buildvolume (LxWxH):
Dimensions printer (LxWxH):
Printspeed: Travelspeed: Position accuracy
Small: 210x220x200 mm (8.27x8.66x7.87 inch) Medium: 210x220x400 mm (8.27x8.66x15.74 inch) Large: 210x220x600 mm (8.27x8.66x23.62 inch) Low quality: 0.3 - 0.2mm Normal quality: 0.2 - 0.1 mm High quality: 0.1 - 0.05 mm Dual: 10 - 80 mm/s Dual: 10 - 120 mm/s X: 10 micron Y: 12.5 micron Z: 2.5 micron
Nozzle diameter:
0.4 mm
Temperature
Filament
1.75 mm PLA/ Flex / Wood-Bronzfill
Operating - temp. printer:
15 - 32° C
Operating temp. nozzle
Dual:
Storage - temp. printer:
0 - 35° C
Resolution:
180 - 250° C
Electronics AC input:
Color frame:
Small: 18 KG Medium: 22 KG Large: 24 KG Small: 380x370x495 mm (14.96x14.57x19.49 inch) Medium: 380x370x710 mm (14.96x14.57x27.95 inch) Large: 380x370x890 mm (14.96x14.57x35.04 inch) Red /White
Print platform: Certificate:
Heated bed glass plate CE certificate
Software 2x
Software
Power:
100 – 240V 3A 50/60Hz (6A 50/60Hz) 120 W (240W)
Operating systems
Opensource Repetier (Cura / Kissslicer) Windows, MAC
Connections:
USB, Display Standalone
File types
STL / OBJ / AMF / DAE
! CAUTION The Builder warranty is only valid when Builder approved material is used.
Builder manual
2
Builder Premium Content Specifications
2
Unboxing
4
Accessoires
5
Overview Builder
6
Start printing Installing
8
Control
9
Interface
10 - 11
Installing filament
12
Bed leveling
13 - 14
Interface
15
Software Print software
17
Cura
18 - 22
Colormixing 23 Maintenance & support Builder Dual-Feed Maintenance Troubleshoot
25 - 26 27
28 - 29
Safety instructions
30
Contact information
31
Builder manual
3
Builder Premium Unboxing
A
s
ore
si cces
Place the box on a flat surface
Lift the top box
Take out the accessiores box and the foam
Lift the printer out of the box
Place the printer on a flat stable surface and open the top
Remove the tywrap which is holding the axis together
Attach the spool holder to the frame
Place the filament spool and insert the filament trough one of the holes
Builder manual
4
Builder Premium Accessoires Accessoires The following parts are included with your Builder 3D printer. Please check if the items below are inside the box. 1x
Build Plate 2x
Filament holder 1x
Power supply 2x
Builder manual
Filament guide tube 2x
Wifi USB adapter 1x
Teflon tube
1x
2x
2x
Paint tray and roller
Filament
Pressure plug 1x
1x
1x
Nozzle 0.4 mm
2x
Steel wire cleaning nozzle
Wood glue
1x
Tool nozzle
Tool heaterblock
5
Builder Premium Overview Parts:
3
2
4.
LCD Screen USB Socket
1.
Power socket
5.
2.
Spool holder
6. Nozzle
3.
Filament Guide
7.
Heated bed
5
4
6
7 1
Builder manual
6
Start printing
Builder Premium Installing
Place the Builder on a stable surface.
Make sure the power switch is in the Off position. Plug the power supply into the power input of the Builder. Now plug the power cord into a grounded outlet.
Builder manual
8
Builder Premium Control Control Switch on the Builder Premium and wait untill the main screen appears. Control the Builder by pressing the buttons on the LCD touchscreen.
Main Screen NOZZLE
HEATED BED
BED HEIGHT
200º 000º
000º 000º
0.00 version
STATUS - IDLE l NO WIFI
The main screen provides information about the printer and object. Press the wifi button and a connection with a network can be made. In the main screen a IP adress will be shown. Type this adress in your smartphone which is connected with the same network. Now from your phone the print can be watched.
USB stick Plug in the USB stick on the side of the printer. Select print to select the gcodes from the USB stick Wifi adapter Plug in Wifi adapter to make a connection with your phone.
Builder manual
9
Builder Premium Interface Main screen NOZZLE
HEATED BED
BED HEIGHT
200º 000º
000º 000º
0.00 version
The Main screen shows the most important information. From this information screen a few settings can be changed while printing. The most commonly used functions are explained in this chapter.
STATUS - IDLE l NO WIFI
Settings screen The settings screen shows the main function for preparing the printer. In this menu the printerhead can be moved preheat or the filament can be loaded or unloaded. When a print is started locking the printer screen is possible for secure the print. Choose the lock menu and enter a password. This password is can be changed anytime. Reset the password by switching off and on the printer.
Move screen Move the printhead in the move screen. Enter a value and move printhead by choosing the direction.
Builder manual
10
Builder Premium Interface Preheat screen Enter the required temperature and select preheat nozzle or bed to heat up.
Lock screen The lock screen gives the opurtunity to lock the screen while printing so nobody is able to stop or tune the print except you.
Replace screen When insert filament choose the extruder and press load untill the filament is placed.
Builder manual
11
Builder Premium Installing filament REPLACE
LOCK SETTINGS
←
←
Installing filaments Insert filament material by following the steps below 1. Select replace in the settings menu.
LOAD
↓
↓ ↓
UNLOAD
↓
EXTRUDER 1
UNLOAD
LOAD
EXTRUDER 2
Press and hold the button to load or unload filament
2. Press load and the printer start to heat up the nozzle. 3. When the temperature is reached the text next start to blink. 4. Push down the lever and insert the filament until you feel some resistance. Now insert the second filament by doing the same. 5. Press the load button until some filament comes out of the nozzle. Do this with both extruders. Start Printen 1. Select print in the main menu. 2. Select the storage from where you want to print. 3. Select the file which you want to print.
! WARNING Make sure when printing with the Dual-Feed Builder both extruder holes are filled with a filament
Builder manual
12
Builder Premium Bed leveling Bed leveling The Premium Builders are equipped with a heated bed. The heated bed ensures a good adhesion between object and glass plate. Besides the heated bed significantly reduces warping of the object. Leveling the print bed is extremely important for a good quality print. After transportation you might want to level your glass plate to ensure your object stick well to the glass plate. Use the following these steps to check this. HOT SURFACE
! CAUTION There is a potential risk of burns, as the heated bed can reach a temperature of 60 degrees Celsius.
Prepare Install the glass plate by opening the two bed clamps. Now gently slide the glass plate inside the clamps at the back of the build plate. Hold the glass plate in place with the two clamps at the front of the buildplate. For a good adhesion to the glass plate it’s necassary to apply a adhesion layer. Builder provides woodworkers glue with the Builder Premium line. Dilute the wood glue half with water and apply this with the paint roller. Using a glue stick is also an option.
Builder manual
13
Builder Premium Bed leveling Set height 1. Clean the nozzle for a right adjustment 2. Move the extruder head to his home position so the printer recognize his zero position. 3. When the printhead is in his home position measure the space between the nozzle and the bed with a piece of paper. Adjust the screws untill you feel slight friction when moving the piece of paper. 4. Now move your printhead above the second adjusting point (screw) and repeat the steps with the piece of paper.
Fine tune height Fine tune the nozzle height when printing the “bed levelling” gcod. The first layer has to stick to the platform as shown in the image below. During printing it is possible to optimize the height.
Nozzle to high
Builder manual
Nozzle perfect
Nozzle to low
14
Builder Premium Filament Filament Builder 3D printers offers you many different types of filament. Every filament that is for sale is tested on our printers. The following types are available in our web shop •
Woodfill, wooden look
•
Bronzefill, a bronze appearance after polishing
•
PVA, material which dissolves when it makes contact with water
•
PLA
Printing other materials After printing with other materials it’s wise to extrude some PLA to prevent jamming. Push down the filament until it comes out.
Builder manual
15
Software
Builder Premium Printer software Cura (Windows, MAC, Linux) Cura is a open source program which prepares your object into a file (gcode) that can be read by the Builder 3D printer. •
Download Cura software
•
After installing Cura, select Custom machine and enter the sizes of your Builder
•
Download the INI-files for your Builder 3D printer
•
Load the INI-files in Cura by using the option “open profile”
•
Enter the number of extruders in the “Machine settings” menu
•
Reopen this menu and set the extruders offset (X-Y) values to zero.
•
For more information about Cura, check the manual.
Repetier Repetier Host prepares your object into a file (gcode) that can be read by the Builder 3D printer.
Builder manual
•
Download Repetier Host from our website http://3dprinter4u.nl/3d-printer-installatie/.
•
Repetier Host is adjusted to the settings of the Builder 3D printer
•
For more information about Repetier Host, check chapter “Repetier Host”
17
Cura Configuration wizard Guide to 3D printing with Cura Cura is a open source program which prepares your object (STL file) into a Gcode file that can be read by the Builder 3D printers. This manual describes how to set up Cura for your Builder 3D printer. Configuration Wizard When you open up Cura for the first time, you will be asked to select the 3D printer that you have. To set up your machine follow the instructions below.
Select the option “Other”and choose if
Select the option “Custom...”
Enter the correct width, depth and
you want to submit anonymous usage
height for your Builder 3D printer and
information
select “heated bed”.
Builder manual
18
Cura Cura settings Builder Profile After running the wizard the machine settings menu appears. Check if all the printer settings for your printer are correct. When you’re using a Builder Dual Feed system set the “Extruder count” to “2”. Now reopen the menu in order to get the “Extruder 2” offset values. Set both offset values to zero. Now open the Builder profile (INI-file) in Cura “File” > “Open profile...” > “Browse for the INI file on your computer” (Check downloads)
When the profile (INI-file) is loaded check if the settings are correct. Print speed depends on your type printer.
! Note Move the mouse over an option for a description.
Builder manual
19
Cura Interface Interface The image below shows the main screen of Cura with the most important functions. Here you can load and adjust 3D models and select the prefered print profile, after which Cura will convert the 3D model to a 3D print file (Gcode). Tools Cura
1
2
4
5
3
1. Load: Load a 3D model (STL-file) 2. Save Toolpath: Save 3D model as a GCODE file on computer or SD card. 3. View mode: This option allows you to view a 3D model in different modes. This can be usefull to see how an object looks like after slicing. 4. Rotate: Rotate the 3D model in a way how it’s easy to print 5. Scale: Scale the 3D model 6. Mirror: Mirror the 3D model ! Note By right clicking on your model you can center, delete and multiply your object.
Builder manual
6
20
Cura Basic settings Print profiles In this chapter you can find basic settings for some main materials. Beginner: When you first start with 3D printing we recommend to start printing with PLA material. Below you can find some basic settings for printing with PLA material. Fast PLA print
Normal PLA Print
High Quality PLA Print
Layer height: 0.3 mm
Layer height: 0.2 mm
Layer height: 0.1 mm
Shell thickness: 0.8 mm
Shell thickness: 0.8 mm
Shell thickness: 0.8 mm
Fill density: 20%
Fill density: 20%
Fill density: 20%
Print speed: 60 mm/s
Print speed: 45 mm/s
Print speed: 30 mm/s
Intermediate: After you understand te basics of 3D printing you can start with printing PLA in combination with PVA as a support material. Below you can find the basic settings for printing with PVA material.
Normal PVA print
Open this menu by clicking the “...” behind “support type”
Layer height: 0.2 mm Shell thickness: 0.8 mm Fill density: 20% Print speed: 35 mm/s Support type: Everywhere Platform adhesion: Brim Support Dual extrusion: Second extruder Wipe&Prime tower: On
Builder manual
21
Cura Basic settings Expert: When you understand all about 3D printing you can start print flexible filament. Below you can find the basic settings for a normal flexible print. Normal Flexible print Layer height: 0.2 mm Shell thickness: 0.8 mm Fill density: 20% Print speed: 20 mm/s Adjust tension lever When printing with high speeds the printer has to extrude more material. To avoid under extrusion increase the pressure on the filament by tightening the screw in the lever.
Builder manual
22
Builder Premium Colormixing Colormixing Besides printing two colors or support material with the Dual-Feed extruder system, it’s possible to mix two colors. When using the colormixing tool, a color gradient can be made. Also manually a color gradient can be made during printing. Colormixing Tool: •
Activate the colormix application with the received activation code (starts with BP)
•
Upload the Gcode file you want to colorize. Click browse to upload.
•
Choose the gradient by sliding the bars. The colors are an example of how the product should look like.
•
Color in the middle is a mix of the top color and bottom color. In the example blue and yellow makes green.
•
Save the colored Gcode when you are satisfied with the settings.
Color mixing manually For a manual colormixing object, navigate trough the display menu. During printing, the flow percentage of each (front/rear) extruder can be set. Select the extruder you want and set the amount of flow you want.
Builder manual
23
Maintenance & support
Builder Premium Dual-Feed extruder Maintain printhead Maintaining your Builder 3D printer is important to achieve the best result. After a lot of printing, the filament material feeding wheel can contain small plastic parts. For cleaning this follow the next steps. •
Press down both levers of the Dual-Feed system
•
Use the pressure plug to remove the shaft that is holding both levers in place.
•
Take both levers out of the extruderhead
•
Check the feeding wheel for stuck printing material. Remove this by using a simple brush or compressed air.
•
When cleaning the feeding wheel is hard, you can choose to remove the feeding wheel from the extruder motor. Remove only when needed!
•
When assembling the feeding wheel be sure that the groove is above the hotend entrance
•
After cleaning, assemble both levers in place by pushing the shaft through
For changing the nozzle and tubes go to our youtube page
Builder manual
25
Builder Premium Dual-Feed extruder Pressure plug In case the filament material gets jammed, you can choose to use the pressure plug. Only use the pressure plug when there is no other option. •
Heat up the printhead of your Builder Dual-Feed extruder
•
Press down both levers of the Dual-Feed system
•
Use the pressure plug to remove the shaft that is holding both levers in place.
•
Take both levers out of the extruderhead
•
Place the pressure plug into the jammed hole
•
Add some pressure to the pressure plug until the jammed material comes out of the nozzle.
•
After cleaning, assemble both levers by pushing the shaft through
Printing other materials After printing with other materials Builder advise to extrude some PLA to prevent jamming. Push down the filament until it comes out. Caution ! When using the pressure plug do not slide it along the feeding wheels. This can damage the printer feeding wheel serious.
Builder manual
26
Builder Premium Maintenance Maintenance
Use grease to lubri-
To achieve the best results and lifetime, maintaince of your
cate point 1
Builder 3D printer is very important.
Use oil to lubricate point 2 and 3
Lubricate
3
Lubrication of the rotating and sliding parts is important for a nice print surface. Lubricate the axis (X-Y) 2 and 3 with oil when
2
1
the printed objects shows some signs of vibrations. Lubricate the Z axis when those feel dry. Feeder wheels After a lot of printing, the filament material feeding wheel can contain small plastic parts. For cleaning, use a tooth brush or compressed air. Nozzle During printing, print material can stick to the nozzle. This stuck material can pollute the object while printing. Clean the nozzle before printing. !
WARNING
When the nozzle is hot clean the nozzle using a thick towel. Do not use any sharp objects to clean the nozzle, this can damage the nozzle.
Builder manual
27
Builder Premium Troubleshooting The first layer does not stick to the print bed This problem is well known in the 3D printing world. The color substances added to the filament may influence the melting point of the filament. To optimize the adhesion of first layer make sure that: •
The space between the nozzle and print bed is not correct. This should be 0.2 – 0.3 mm.
•
Clean the print bed, replace the adehesion layer use Wood glue or Pritt
•
Increase the ”first layer thickness” for a better adhesion.
•
Place a “skirt” around the object. The skirt is a line drawn around the object at the first layer. This helps prime your extruder.
•
Extrude material before printing.
Under extrusion •
Make sure the extruder wheels are clean. After a lot of printing these wheels can be full of dust and/or filament. Clean them with a brush or compressed air.
•
There is not enough pressure on the filament. Increase the pressure by tightening the lever screws
•
The extrusion speed is too high. Decrease the print speed.
•
The nozzle got jammed. Clean the nozzle with the tools provided by Builder 3D Printers.
•
Increase the temperature (250C) for a short time (max 5 min). The Builder will melt the old material and extrude this through the nozzle.
•
The filament specs are different from the filament delivered by Builder 3D Printers. Every filament has its own specs. Contact the filament supplier for more info.
•
Builder manual
The thermal protection is activated as the extuder head got to hot. Cool down the extruder
28
Builder Premium Troubleshooting •
Value E steps/mm are incorrect. Check the G-code and/or reset the Builder to the fabric settings with LCD menu (restore failsafe).
No connection with the Builder: The Builder 3D Printers are stand-alone printers. If the Builder is connected to the pc or laptop but the software is unable to identify the printer this might be the problem: •
Is the driver installed correctly? Use administrator rights.
•
Check to which COM port the Builder is connected. Use “device management”.
Difficulty with inserting the filament •
Bend the filament straight and cut the filament at an angle. This makes it easier to insert the filament in the extruder head.
•
Broken filament in the extruder head. Preheat to 210 and remove the broken filament. If the filament is too short, use the pressure plug.
•
Extruder screws are too tight. Turn them a bit looser.
The 3D printed object doesn’t look good. •
Not enough cooling. Increase the “minimum layer height” time
•
Check the tension on the timing belts. Increase the tension if needed. Check our official YouTube channel: https://www.youtube.com/user/builder3dprinters
•
The filament specs are different from the filament delivered by Builder 3D Printers. Every filament has its own specs. Contact the filament supplier for more info.
Builder manual
29
Builder Premium Safety instructions ! WARNING If you do not follow these next instructions, it will lead to fire, electric shocks or other injuries or damage to the Builder or other properties. Read all safety information below before you start using the Builder. •
Do NOT use water or fluid liquids, the bottom contains electric components.
•
Minimum age for use of the Builder is age 14.
•
Use the Builder in a bright area and preferably in 20 degrees Celsius.
•
Do NOT enter the printing area with your hands when the printer is in use.
•
Make sure the Builder is placed in a ventilated room.
•
When cleaning the nozzle, use a piece of cloth, but beware(!!) the nozzle is still hot after printing.
•
After a 30 hour print, clean the round conduction with a piece of cloth and provide the printer with new grease/oil if necessary.
•
Turn the Builder off with the main switch on the back of the Builder when the printer needs maintenance.
•
The Builder has been extensively tested, but if a failure occurs please contact
[email protected].
•
Do NOT open the bottom side, but leave this to our certified workers.
•
If you decide to leave the Builder unattended to print, make sure to remove flammable objects near the printer.
Builder manual
30
Contact information: Builder 3D Printers HQ Smelterij 4, 2211 SH Noordwijkerhout The Netherlands Telephone Email: Email Helpdesk: Website:
+31 (0)252-744128
[email protected] [email protected] www.builder3dprinters.com
