Transcript
32CH DVR System Installation Guide
32-Channel DVR System Installation Guide I.
System Requirements
•
DVR Software Version： huperVision 4000 v1.12 only
• Hardware Requirements 1. Dual monitors 2. VGA card with dual display support (D-Sub and DVI) 3. DVR card models: 4416SG DVR cards (x2) or 4416DG DVR cards (x2) • Microsoft Windows Settings 1. Change the Desktop Display model to “Horizontal Stretch” 2. Change the VGA Resolution (DPI) to ”2048x768, 16 bit” PS. It requires two DVR cards of the same model to build a 32 channel DVR system. For example, stack two 4416SG DVR cards or two 4416DG DVR cards to set up a 32CH DVR system. If you are using “ATI VGA” card, please refer to Appendix: ATI & Nvidia Dual-screen setting.
-1-
1/9/2007
32CH DVR System Installation Guide
II. huperVision 4000 Installation Step 1: Click [setup.exe] to install huperVision 4000 v.1.12. Click “Next” to continue the installation.
Step 2: Select “I accept….”
-2-
1/9/2007
32CH DVR System Installation Guide
Step 3: Click “Next”
Step 4: Select “32ch version” and click “Next”
-3-
1/9/2007
32CH DVR System Installation Guide
Step 5: Click “Install”
Step 6: Click “Finish” after the InstallShield Wizard is Completed.
-4-
1/9/2007
32CH DVR System Installation Guide
Step 7: Reboot the computer, and the Site Server will start automatically.
Step 8: After the 32CH DVR system is launched, huperVision 4000 will require to add the video record storage. To avoid the disorder of video record database, it is important to specify two separate record storage for CH1~16 and CH17~32 before using huperVision 4000. You may see the folder F:\data1 in the left monitor is assigned to CH1~16 while the folder G:\data2 in the right monitor is assigned to CH17~32.
-5-
1/9/2007
32CH DVR System Installation Guide
III. Remote Connection to the 32CH DVR System 1. Which Ports to manually open in internet connection filewall and router? For 1 ~ 16 CH : Web Server : TCP 80 Vedio Access: TCP 18082(Speed > 56K)、TCP 18083(Speed<56K) For 17~32 CH : Web Server : TCP 81 Vedio Access: TCP 18084(Speed > 56K)、TCP 18085(Speed<56K) 2. How to connect to your 32CH DVR via the IE Browser? For 1 ~ 16 CH : IP Address is htpp://xxx.xxx.xxx.xxx For 17~32 CH: IP Address is http://xxx.xxx.xxx.xxx:81
-6-
1/9/2007
32CH DVR System Installation Guide
3. How to connect to the 32CH DVR system by using huperRemote program? Step 1 : After finishing huperRemote program installation,please go to C:\Program Files\huperRemote. Open the file [rViewer.ini] and you will see the followings: [Max] DontSavePW=0 MaxSplit=4 Change the MaxSplit value to 6, as below: MaxSplit=6 Step 2: Select
to open Connect dialogue box.
Change the Bandwidth to “High speed(>56k) – 18084,” and it to connection list. Then you can connect to your 32CH DVR system.
-7-
1/9/2007
32CH DVR System Installation Guide
4. How to download video records by using the huperRemote program? To download video records from the database, you need to connect to the following Site Addresses: For 1~16CH: xxx.xxx.xxx.xxx (Example: 202.22.140.15) For 17~32CH: xxx.xxx.xxx.xxx:81 (Example: 202.22.140.15: 81) Note: It requires separate download from the above two Site Addresses. For example, you have to connect to 202.22.140.15 to download the video records of the first 16 channels. If you’d like to download the records of CH 17~CH 32, you have to connect to 202.22.140.15: 81 for a separate download.
1~16CH
17~32CH
-8-
1/9/2007
32CH DVR System Installation Guide
Appendix: ATI & Nvidia Dual-Screen Setting I.
ATI Dual-screen setting
II. Nvidia GeForce 6600 Dual-screen setting
I.
ATI Dual-screen setting
Download Drivers & Software http://www.ati.com (1) Microsoft .NET Framework (2) Catalyst Control Center Package
1. Install Microsoft .NET Framework 2. Install VGA driver 3. Setup ATI-multimoniter (1) Right click you mouse on the Windows desktop (2) Select ATI Catalyst Control
-9-
1/9/2007
32CH DVR System Installation Guide
4. Click “Next” button
5. Click “Go” button
- 10 -
1/9/2007
32CH DVR System Installation Guide
6. Select and click “Next” button
7. Select “Horizontal Stretch” and click “Next” button
- 11 -
1/9/2007
32CH DVR System Installation Guide
8. Click “Finish”
9. Check “Display Properties” 2048*768”,”16bit”.
- 12 -
1/9/2007
32CH DVR System Installation Guide
II. Nvidia GeForce 6600 Dual-screen setting Step 1: Select “Desktop Management” page and Click “Disable”
Step 2: Select “nView Display Settings” and nView Display Mode is “Horizontal Span”.
- 13 -
1/9/2007
32CH DVR System Installation Guide
Step 3: Check “Display Properties” 2048*768”,”16bit”.
Step 4: The Display was like this.
- 14 -
1/9/2007
