• Tcp/ip Network Compatible Via Lwl-data Interface • Automatic Iris

Transcript

• TCP/IP network compatible via LWL-data interface • Automatic iris, backlight compensation and automatic white fader • High-quality picture recording-system • Configurable alarm-control • Robust flameproof cabinet • Mechanically adjustable (horizontal/vertical) TECHNICAL DATA The Network Camera ME 9200 is used for the monitoring of plant and machinery at critical working places and is suitable for the application in explosive areas. INTERNAL POWER SUPPLY Application field is the monitoring of excavated material at hand-over points of conveyor belts as well as monitoring of man haulage at the entrance and exit points. Supply voltage 85..264 V AV Net frequency 50/60 Hz Current constumption, typ 1,0 A / 127 V AC 0,6 A / 230 V AC Nominal output, max. 60 W / 127 V AC 58W / 230 V AC CAMERA FEATURES In opposition to an analogue video surveillance system which uses a point-to-point connection the IP-surveillance uses IP-network technology for data transmission. The network-compatible video system is bidirectional. The network camera is able not only to send the picture signal but also to receive control signals. It actuates e.g. doors or triggers an alarm. Video format NTSC, PAL Digital video-format MPEG-4, MJPEG Digital zoom 10 Power consumtion, typ. 13,5 W / 230 V AC Network Ethernet 10BaseT/100Base-FX Operating system required Microsoft Windows 2000 / XP Lens 0.05 Lux minimum illumination MECHANICAL DATA Further features are the worldwide access via internet as well as the high image quality of the picture recording system. Due to the progressive scan-technology the Network Camera is optimally suitable for the surveillance of moving pictures. Width approx. 200 mm Height approx. 141 mm Length approx. 372 mm Weight approx. 27 kg Degree of protection IP 54 FLEXIBILITY THROUGH NETWORK FUNCTIONS EXPLOSION PROTECTION Type of protection1 I M2(M1) Ex d [op is] I The Network Camera can be controlled by the IP-network. In case of an occuring event the video recording can be started by the configurable alarm-control. Because of the network function the Network Camera can be used optimally as security monitoring system. Ambient temperature 0..+40 °C SOFTWARE APPROVAL ACCORDING TO ATEX EC-Type Examination Certificate 1 BVS 05 ATEX E 043 X-N1 The connected LWL-cable is permitted to be installed in areas where category M1 is required. Tel +49 6897 857-0 Video management-software included: * IP CamLocator for start-up * IP CamSecure for security settings NETWORK CAMERA ME 9200 APPLICATION Technical data are limit values. Fax +49 6897 857-188 If the product is integrated into systems or operated in Becker Mining Systems AG combination with other devices, its permissible operating values can deviate from these limit values. Subject to technical modifications without prior notice. Walter-Becker-Straße 1 66299 Friedrichsthal Germany [email protected] www.becker-mining.com