Transcript
UDA-1 USB DAC System for PC Audio Experience Hi-Res Audio in an easy solution with the USB DAC and Amplifier that connects to your PC, supports DSD and the full range of Hi-Res file formats and is compatible with any music player like iTunes, Windows Media player and more.
Bullets • Playback of DSD, LPCM, WAV, AIFF, FLAC, ALAC, ATRAC Advanced Lossless, ATRAC, MP3, AAC, WMA music files • 20W x 2 Class AB amplifier • Compatible with any music player like iTunes, Windows Media player, Media Go and more • Analog FIR (Finite Impulse Response) filters effectively reduces high-frequency noise in DSD signals • DSEE, restores high frequency sound removed by the audio compression process, improving the playback of compressed music files • Connect to other audio products and Apple and Android devices with available USB and, analog and digital inputs • The chassis achieves both high precision and high rigidity for improved sound and low distortion Features Hi-Res formats supported The UDA-1 can decode the following file formats: DSD (DSF, DSDIFF), PCM (44.1k/ 48k/ 88.2k/ 96k/ 176.4k/ 192kHz•16/ 24/ 32bit) DSD (2.8/ 5.6MHz), WAV, AIFF, FLAC, ALAC, ATRAC Advanced Lossless, ATRAC, MP3, AAC, WMA music file playback. Music Playback Connect the UDA-1 to a PC via USB and use any music player like iTunes, Windows Media player, Media Go and more to enjoy the Hi-Res music experience. Analog FIR Filters This digital-to-analog converter effectively reduces high-frequency noise in DSD signals. It features independent right and left channels, with four analog FIR (Finite Impulse Response) filters per channel producing a combined one-clock delay. FIR filters are ideal for D/A conversion of DSD signals. Digital Sound Enhancement Engine (DSEE) When turned on, the DSEE offers natural sound with a spacious feel by restoring high frequency sound and the tail shape of the waveform likely to be removed through the audio compression process. Connectivity Take advantage of the UDA-1 enhanced music capabilities connecting to the units’ USB (USB-A and USB-B), analog and digital inputs. The USB inputs are compatible with both iOS and Android devices. Inputs are also included for optical, coaxial and analog devices. An analog output and headphone jack are available as well.
Large Power Source Block Capacitor This acoustically tuned, custom block capacitor features not only improved electrolytic solution and electrode foil magnification, but also superior case form, sleeve material and length. Only Sony utilizes this component, which is optimally tuned with chemical capacitor length and sleeve cut. Left-right separated, large bandwidth power amp This AB-class analog amp utilizes an EBT (emitter balance transistor) with a cutoff frequency of over 300MHz for the final transistor. The amp device features minimal phase variation up to the high range and excellent transient response. Its twin mono format with separate left and right channels eliminates left-right sound interference and ensures clear, high-quality sound reproduction. The resilient high range reproduces sound with rich musicality and a high degree of faithfulness. High-Rigidity Chassis structure Its all-in-one compact size and sturdy 3mm-thick solid aluminum design extends from front panel to top panel. One-point ground structure Concentrating audio signal control points into a single point eliminates fluctuation of left- and right-channel, and contributes to dynamic sound.
General Specifications ACCESSORIES Supplied accessories
Remote Control
Supplied accessories
Instruction Manual
Supplied accessories
Quick Start Guide
Supplied accessories
USB Cable
AMPLIFIER/RECEIVER/DECODING FORMATS LPCM (2CH/5.1CH/7.1CH) thru HDMI
Yes (2ch only)
AMPLIFIER/RECEIVER/INPUTS AND OUTPUTS Analog Audio In
Yes (1 in)
Coaxial
Yes (1)
Headphone Out
Yes (1)
Line Out
Yes (1)
Opt. In
Yes (1 in)
Other:
USB (1 type A rear) PC In (1 USB DAC)
Pin Jack Color
Gold
AMPLIFIER/RECEIVER/OUTPUT POWER (4 Ohms 20-20kHz) THD
10%
4 Ohms 20-20kHz
23W + 23W
Output Power (JEITA 10% 1kHz 4Ω)
23W + 23W
AMPLIFIER/RECEIVER FEATURES Amplifier Type
Analog
Auto Standby
Yes
DSEE LED
Yes
Detachable AC
Yes
Frequency Characteristics
10Hz – 100KHz (+0dB, -3dB)
Number of Amp channels
2
Power Consumption
65W
Power Consumption (Stand By)
0.3W
Power Requirements
120V 60Hz
Signal-to-Noise Ratio (A Network) (When all of EQ/Surround off)
100dB
Speaker Impedance
4 – 16 Ohms
Speaker Terminal
Screw
Tone Control
Tuned for SS-HA3
WEIGHTS AND MEASUREMENTS Dimensions (Approx.)
Receiver: 8 7/8 x 3 x 10 3/8 in (225 x 74 x 262 mm) Carton: 13 1 /8 x 7 5/8 x 11 3/4 in (333 x 193 x 298 mm)
Weight (Approx.)
Receiver: 8 lbs 14 oz (4.0 kg) Gross: 11 lbs 1 oz (5.0 kg)
© 2014 Sony Electronics Inc. All rights reserved. Reproduction in whole or in part without written permission is prohibited. DSD, DSEE are trademarks of Sony. Wi-Fi is a registered trademark of the Wi-Fi Alliance. All other trademarks are trademarks of their respective owners. Features and specifications are subject to change without notice.
