Transcript
WM-100GX-N-NGS eXtreme Power 11n 2.4Ghz 1x1 Wall PoE Access Point with CenOS4.0 ( 800mW )
Bundles CenOS 4.0 Software Core
EAN Code : 4712757152944
The WM-100GX-N-NGS eXtreme Power 11n 2.4Ghz 1x1 Wall PoE Access Point hardware utilizes 800mW eXtreme power with a plastic housing and built-in 2.4 GHz 1x1 Omni directional antennas. CenOS4.0 software supports 3 operational modes: the (AAP) Authentication AP Mode, (TAP) Thin AP Mode, and (CAP) Control AP Mode. It utilizes built-in remote management features that simplify deployment and reduce costs of continued maintenance of the WiFi hotspot Access Point . Improved safety precautions needed for enterprises can be achieved through a combination of Radius Servers, SSL, and AAP authentication. For application in hotels, shopping malls, restaurants, and other public places, the increased utility of Guest portals allows administrators to control guest stratification (SSID), customize bandwidth usage, and also set time limitations for specific users. By integrating OAuth2.0, guests can also gain authorization and access through platforms such as Facebook and Google+. CERIO’s new WM-100GX-N-NGS CenOS 4.0 Software package includes Guest Portal capability that allow for more network security and efficiency, improved customer experience, easier user management, and provides a platform for high class businesses to raise brand awareness. The Guest Portal login page is extremely effective in advertising and projecting brand image, a feature very useful to large companies and small businesses. Power users wishing to change their mentality should adopt Cerio’s new CenOS4.0 software, boosting transmission rates through unhindered AAP Guest Portal authentication (AAP Mode) login. We at Cerio aim to bring consumers into the new era of Wifi performance and security. 1 V1.0a
WM-100GX-N eXtreme Power 11n 2.4Ghz 1x1 Wall PoE Access Point is an easy-to-install and cost-effective solution for most of indoor wireless deployments. The high class access point is perfect for application in areas such as: hotels, offices, and Luxurious houses. The WM-100GX-N effectively works to extend the range and increase the performance of a wireless network. The WM-100GX-N provides a RJ-45 wired connection as well as both Wi-Fi wireless connection and RJ11 Pass-through functionality. Equipped with a network administrator can centrally manage the WM-100GX-N via a Web browser and SNMP MIB browser & VLAN tag. Included PoE, power and data are supplied to the unit using CAT5 Ethernet cable. It can be powered via PoE switch or PoE Injector when available.
The Software Bundle: CenOS 4.0 Introduction CERIO’s NGS Firmware uses the CenOS4.0 core. The firmware’s main functions are web login authentication and Thin Access Point (TAP) modes. CERIO’s CenOS 4.0 Access Point uses hotspot technology importing concepts. Main functions include authentication login support remote RADIUS Server, local user account, OAuth2.0 account and guest login in AAP mode. Cerio’s (Thin AP) wireless base station TAP function supports only GUI state monitor displays when acting as a Thin Access Point. Once this setting is operational, the device ends all NGS centralized control and management functions and operates strictly under the control and management of other supervising systems such as an AP utilizing CAP (Controller Access Point) mode. The thin AP deployment architecture acts to effectively improve network efficiency, and reduce security concerns of information theft from wired/wireless invades. Because no settings are stored in a Thin AP, device theft or invader intrusion would pose no threat to the networks security. Controller Access Point (CAP)- AP manager Administrators should use CAP mode to simultaneously managed APs of AAP and TAP mode. Centralized APs management enables control of Wi-Fi function / security / users authentication / firmware upgrade / system time / traffic monitoring / and system information. TAP mode supports GUI status monitoring, allowing administrators to facilitate audit APs. CERIO’s NGS Firmware also supports load balance management through TAP mode (Real-time user limitation).
2 V1.0a
The firmware provides Traffic Monitoring and Graphical GUI Status Interface. Administrators can easily monitor system statuses and network traffic for each AP.
WM-100GX-N-NGS CenOS 4.0 Software key Features
Operation Modes : (AAP) Authentication AP Mode, (TAP) Thin AP Mode, (CAP) Control AP Mode
Provide customizable login and logout portal page by Web Page
Each Virtual ESSID supports 10 local built-in local accounts, Supports 10 local accounts x 8 virtual ESSID for a total of 80 local accounts. And supports external RADIUS server, and OAuth2.0 Facebook / Google accounts
Provides customizable Login redirect URL and Login URL web links
Supports wireless IGMP the v1/v2/v3 function, may pass on in the wire the immediate video and music wrapped gift
Supports Control AP Group Management, Supports up to 16 access points 3
V1.0a
Centralized Control Management of Wired and Wireless Devices in CAP Control AP
AP Group Management- maintain a set of setting templates that simplify the task of assigning the same settings to multiple Aps
Multi Language SSID and 8 Multiple-ESSID support , And Support IEEE802.11f IAPP
QoS(Quality of Service) for bandwidth management and traffic prioritization and supports network Users Upload/Download Bandwidth Control speed limits, and User Device (Total) bandwidth control. Administrators can regulate the maximum Bandwidth Upload/Download speed limit of each network user
Auto Channel Scan and support Scan other AP site survey Single information
Support Hardware chipset base Watch Time Dog , The OS will be reboot by automatically before crash
Software UI support Auto reboot setting function , Can by Hour/Daily/Weekly to setting software Auto Reboot
Bundles Cerio CenOS 4.0 software Core interface allows for communicating with Cerio Wireless NGS CAP ( CAP Mode ) AP Management system or NGS-1000 X86 base Access Controller hardware device of network management servers
Enable and Disable to control blinking of the devices LED lights
SupportsIEEE802.1d Spanning Tree
Support HTTP/HTTPS , CLI via Telnet and the SSH interface
Provides Traffic Monitor and Graphical GUI Status Interface
4 V1.0a
WM-100GX-N-NGS CenOS 4.0 Operation Mode Applications WM-100GX-N-NGS eXtreme Power 11n 2.4Ghz 1x1 Wall PoE Access Point with CenOS 4.0 software supports three operational modes: the (AAP) Authentication AP Mode/(TAP) Thin AP Mode/(CAP) Control AP Mode. It utilizes built-in remote management features that simplify deployment and reduce costs of continued maintenance of the WiFi hotspot Access Point . (AAP) Authentication AP Mode The WiFi Authentication Supports Web Login through RADIUS Servers / Local Account / OAuth2.0
(TAP) Thin AP Mode Use CenOS 4.0 CAP Mode to Control devices utilizing TAP mode
5 V1.0a
(CAP) Control AP Mode CAP Mode allows for Simultaneous Management of APs operating in AAP and TAP Mode
WM-100GX-N-NGS CenOS 4.0 Software Specifications Support Wireless Access Controller CERIO CenOS 4.0 Access Point provides authentication and authorization for a wireless networks. Administrator can select CAP (Control Access Point) mode to centralize management of network APs. Centralized APs Management of CAP Mode
AP Group management –maintain a set of setting templates that simplify the task to assign the same setting to multiple APs
AP-Automatic configuration and provisioning by CAP mode.
Locally maintained configuration profiles for managed APs.
Auto discovery managed APs for TAP/AAP mode .
Central firmware Upgrade-Select multiple APs and upgrade their firmware at the same time
Remote Firmware upgrade by TFTP and HTTP.
6 V1.0a
Managed APs Monitoring
Monitor APs for traffic and system information.
The number of associated clients to the APs.
Support Location Map Management.
Thin APs of TAP Mode When devices operates in TAP (Thin AP) mode, other operation functions are disabled and the Thin AP device must be controlled and managed by other devices such as a NGS CenOS 4.0 CAP mode (Controller access point- AP manager). Management through NGS-1000 (X86 hardware controller) systems allows for efficient structuring and controllability of large network infrastructures in a wide range of environments. Because of the simple functionality of Thin APs, thin AP devices experience better CPU and memory loading, improving the overall performance of the network infrastructure. Thin AP mode provides only single streamlined data flow to monitoring modules, which simplifies the surveillance state of TAP devices. Access Points operating under TAP mode can only provide status modules to administrators. Thin AP devices cannot control themselves, and instead needs other devices such as NGS CenOS 4.0 CAP mode (Controller access point- AP manager) to provide management settings. Thin APs provide a sense of network security because if the device were stolen or hacked, there would be no valuable information susceptible to loss due to the device’s simplicity and lack of functionality.
Guest Portal Hotspot of AAP Mode Customizable Login Service provider can benefit from the flexible web redirection service. This service provides a set of 7 V1.0a
location, browser, and user-specific information to the backend system to enable value added personalized service provided by the WISP. Detailed location information is available via HTTPs/XML interfaces. Web pages can be either stored locally on the OS or remotely on a guest portal server.
Authorization Authorization: access control to network resource such as protected Network with intranet, Internet, and bandwidth. Web Authentication
Authentication: single sign-on (SSO) client with authentication integrated into the local authentication environment through local, RADIUS Server and OAuth2.0
Support internet bandwidth control and restrict the number of guests.
Allow MAC binding IP address for local users authentication.
Support Web-based for SSL browser-based authentication Default support OAuth2.0 by Google and Facebook account authentication
Radio Resource Simultaneous air monitoring and end user service of AAP and TAP mode Dense deployment options for capacity optimizations Hot Standby at TAP mode (supports fail-over as a standby TAP mode) Load Balance with another available TAP mode(Real-time users limitation) Wireless Feature
8 V1.0a
Transmission power control :
Layer 1~9
Channel selection : Manual or Auto
IEEE802.11f IAPP : to facilitate faster roaming for the stations among different APs nearby
No of associated clients per AP : 64
Multiple ESSID per Radio: 8 and support Tag VLAN
Dynamic Wireless re-transmission
Channel Bandwidth setting : 20MHz or 20/40MHz
HT Tx/Rx Stream selection : 1 or 2
Control Access Point (ESSID) Signal for on/off.
Wireless Security / Encryption
WPA/WPA2 personal and enterprise
AES(CCMP): 128bit (FIP-197)TKIP: RC4-40
IEEE802.1X network login user authentication (EAP-MD5/TLS/TTLs)
EAP over LAN (EAPoL) transport with PEAP and EAP-TLS authentication
WPA/WPA2 enterprise support RADIUS server authentication (RFC2618)
User Name and encryption key binding for strong network identity creation
Hidden SSID broadcast support, and VLAN assignment on ESSID
Blocks client to client discovery within a specified VLAN (ESSID)
Access Control list (ACL) by MAC Address
Quality of Service
Download and Upload traffic control and support Traffic Analysis and Statistics
Packet classifications via DSCP (Differentiated Services Code Point) and Support IEEE802.11e WMM
Support COS and DiffServ/TOS, IEEE 802.1Q Tag VLAN priority control
User Management
Users Session Monitor
SSL protected login portal page
Login Session idle time out setting
Login time frame control 9
V1.0a
Support User Log and traffic statistic backup to system log server
Guest used Internet service control by Count Limit / Login Time / QoS control
System Administration
Provide customizable login and logout portal page by Web Page
CLI access (Remote Management) via Telnet and SSH
Web base setting interface and Administrative Access : HTTP / HTTPS protocol
Support local and remote firmware upgrade (via the Web)and Utilities to backup and restore the system configuration
system Log backup by remote system log server
System time Update support NTP Server and manual
Status monitor
Status monitoring of on-line users and authentication users
Real-Time Online Users Traffic Statistic Reporting and users connection status
Support Syslog for diagnosing and troubleshooting
User traffic history logging
WM-100GX-N-NGS Hardware Key Features
800mW at 2.4Ghz Output eXtreme High Power
IEEE 802.11n 1Tx / 1Rx Design, Bandwidth of up to 150Mbps(Tx), 150Mbps(Rx) link rate
Integragted IEEE 802.3af Power over Ethernet (PoE) in this device.
Ethernet RJ45 x 2 port connector and Phone RJ11 x2 port design
10 V1.0a
WM-100GX-N-NGS Hardware Application Mounting Application
Desktop Stand
Wall Mounting
Ceiling Mounting
Bracket Stand on Desktop
Mounting on Wall
Mounting on Ceiling
WM-100GX-N-NGS Hardware Specifications Application Software
OS System Compatible edition
Cerio CenOS 3.0 and Cerio CenOS 4.0 Software Core
Specifications Standards Conformance
IEEE 802.11 b/g/n compliant IEEE 802.3 / IEEE 802.3u IEEE 802.3af Power over Ethernet IEEE 802.11i Preauth (PMKSA Cache ) IEEE 802.11d Multi country roaming IEEE 802.1Q Tag VLAN IEEE802.11f IAPP IEEE802.11e WMM 11
V1.0a
Ethernet Configuration
10/100BASE-TX Auto MDI/MDI-X RJ-45 Ethernet * 2 (Power over Ethernet 802.3.af PoE in )
Telephone Configuration
RJ-11 Pass Through In x1 connector , Out x1 connector
LED Indicators
( Power / Network Access ) LED x 1
Wireless Specifications Data Transfer Rate
IEEE802.11b : 1 / 2 / 5.5 / 11Mbps (auto sensing) IEEE801.11g : 6/ 9/ 12/ 18/ 24/ 36/ 48/ 54Mbps IEEE802.11n : 150Mbps (Tx), 150Mbps (Rx)
Frequency Range
2.412 ~ 2.462GHz (USA) 2.412 ~ 2.484GHz (Japan) 2.412 ~ 2.472GHz (Europe ETSI) 2.457 ~ 2.462 GHz (Spain) 2.457 ~ 2.472 GHz (France)
Channel Spacing
IEEE802.11b/g/n : 20/40MHz
Media Access Protocol
CSMA / CA with ACK
Modulation Method
IEEE 802.11b: DSSS (DBPK,DQPSK,CCK) IEEE 802.11g/n: OFDM (64-QAM,16-QAM,QPSK,BPSK)
Operating Channels
802.11b/g/n : 11 for FCC,14 for Japan,13 for Europe, 2 for Spain, 4 for France
Transmit Power Variation
Max : 29 ± 1 dBm
Receiver Sensitivity
Max : -96dBm
Environmental & Mechanical Characteristics Operating Temperature
-25 °C ~ 55 °C
Storage Temperature
-25 °C ~ 65 °C
Operating Humidity
10% to 80% Non-Condensing
Storage Humidity
5% to 90% Non-Condensing
Antenna
Build in 1x1 Smart Omni Directional Antenna
12 V1.0a
Form Factor
Stand Bracket : for Stand / Wall Mounting / Ceiling Mounting
System Power Consumption
8 Watt Max.
Input Power Require
803.3af 48V PoE Ethernet Interface Power In
Dimensions ( W x H x D )
Main Unit : 52 x 76.2 x 35mm Stand/Mounting Bracket : 64 x 85.5 x 54 mm
Unit Weight
Main Unit 72.5g , Stand/Mounting Bracket 23.5g
Certifications
CE, FCC, NCC, BSMI, ROHS Compliant
Package Content 100GX-N Main Unit
x1
RJ-45 UTP Cable
x1
Power Adapter ( Power Supply )
x1
PoE Adapter
x1
Stand/Mounting Bracket
x1
CD Manual
x1
Quick Installation Guide
x1
Warranty Card
x1
13 V1.0a
