Transcript
Buro Persona Chair operating instructions, general care & MATERIALS ANALYSIS
Operating Instructions Seat tilt adjustment
Adjustable seat height
To adjust the seat tilt mechanism lift the middle right hand lever (4) and tilt the seat to a comfortable position. Press the lever down to LOCK the seat tilt mechanism in your desired position.
While sitting in the chair, lift the front right hand lever (1) to lower the seat to the desired seat height position. To raise the seat, lift the front right hand lever (1) while supporting your own weight off the seat.
4
1 Depth adjustable seat
Back tilt adjustment
Pull out the right hand knob (2) and slide the seat forwards or rearwards to achieve optimum leg support and sitting position.
2
5
Ratchet height adjustable backrest
3
Adjust click by click by pulling the back up to the preferred position. To lower the back, pull up as far as possible to release and it will reset to the lowest position.
To adjust the back tilt mechanism lift the rear right hand lever (5) and tilt the back to a comfortable position. Press the lever down to LOCK the back tilt mechanism in your desired position.
General Care • To maintain the appearance of non-upholstered parts wipe the surface with a clean cloth dampened with a mild detergent solution. •D o not remove any parts for separate cleaning. •D o not saturate the fabric or interior with water or other cleaning liquids. •D o not shampoo clean. •D o not clean with hot water extraction machine. •D o not clean with onsite drycleaning machine. • Protect from direct sunlight, heat and weather.
Materials Analysis buro persona chair The Buro Persona chair was designed with a commitment to environmentally sustainable products and business practices. It is manufactured from recycled and recyclable materials.
% recycled content
Material Type
chair component
Plastic (7.7%)
• Castors (0.2kg) • Paddles (0.3kg) • Seat Pan (0.6kg) • Moulded Gas Lift Bush (0.05kg) • 5 Star Base Cap (0.45kg) • Gas Lift Bellow (0.05kg)
35%
Steel (51.6%)
• Seat Mechanism (5.45kg) • Screws & Bolts (0.5kg) • Gas Lift & Support Tube (1.17kg) • Back Post & Bracket (1.8kg) • Steel Base (2.1kg)
0%
Plywood (28.1%)
• Seat Plywood (1.5kg) • Back Plywood & Shell (4.5kg)
0%
PU (11.2%)
• Seat/Back PU Foam (1.8kg) • Arm Pad PU (0.6kg)
0%
Upholstery (1.4%)
• Upholstery Fabric / Leather (0.3kg)
0%
88%
Packaging (100%)
• Cardboard Carton & Internal Packaging (1kg) • Plastic Bag (0.1kg) • Recycled Paper (0.1kg) • Strapping
• Tape (0.05kg)
0%
0% 90% 0%
% recyclable after use
98.6% Recyclable
1.4%
Non-Recyclable
96%
Recyclable
4%
Non-Recyclable
