Transcript
BX-3 BRICK XTREME DRY BRICK SAW OWNER’S MANUAL & OPERATING INSTRUCTIONS
CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial Number is located on the left side of the blade guard.
SERIAL NUMBER: NOTE: For your (1) one year warranty to be effective, complete the warranty card (including the Serial Number) and mail it in as soon as possible.
EXPLODED VIEW AND PARTS LIST EXPLODED VIEW:
BX-3
Revision 09/04, Effective Date September 17, 2004
Page 26
EXPLODED VIEW AND PARTS LIST PARTS LIST: Item A A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 B B1 B2 B3 C C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 D D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 E E1 E2
BX-3
Description Assembly, Frame, Right Casting, Frame, Right Casting, Frame, Left Support, Horizontal Frame Tube Connector, ¼-20 Screw, ¼-20 x 1 ½ Hex Head Cap Washer, ¼ SAE Flat Washer, ¼ Split Lock Strap, Table Guide Rail Screw, ¼-20 x ¾, Hex Head Cap Washer, ¼ Split Lock Drive Stud, Round Head Grooved #16 (¼) x ½ Label, Adhesive “BX3” Label, Safety Caution Label, MK USA Tag, Serial, Brick Saw Label, Prop 65 Label, Warning, Extension Cord Assembly, Arm, Motor Mount Casting, Arm, Motor Mount Bushing, Nylon Flange Label, Adhesive “Brick Xtreme” Assembly, Pivot Clamp Casting, Pivot Clamp Screw, ¼-20 x 1 ¼ Socket Hd. Cap Washer, ¼ Split Lock Pin, Pivot ∅.625 x 5.6 Screw, Set ¼-20 x ¼ Cup Point Spring, Torsion Stop Block Screw, ¼-20 x 5/8, Socket Hd Cap Pin, Detent w/ Pull Ring Lanyard Assembly, Handle & Switch Handle, Upper Handle, Lower Screw, M3.5 x 12mm Screw, ¼-20 x ¾, Socket Hd. Cap Washer, ¼ SAE, Flat Washer, ¼ Split Lock Insert, Expansion, ¼-20 Standard Switch, Trigger Plate, Screw, Switch Mounting Cord, AC Power 120V Cover, Wire Screw, # 6-32 x 1 ¼, Socket Flat Head Washer, #6 Flat SAE Assembly, Motor Motor, AC 115 Volt / 15 Amp, 3500 RPM Flange, Outer
Revision 09/04, Effective Date September 17, 2004
Qty 1 1 1 3 6 6 6 6 2 10 10 2 1 1 1 1 1 1 1 1 2 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 8 2 2 2 2 1 1 1 1 1 5 1 1 1
MK p/n n/a 157367 157369 157384 157930 151914 151915 152591 157383 152370 152591 158071 157959 155576 154334 158096 154337 155672 n/a 157599 157932 157958 n/a 157593 154683 152591 157645 157528 157702 158226 152587 157933 158072 n/a 157874 157875 158156 152587 151915 152591 158147 157934 157876 157935 157880 158160 158231 n/a 157801-R 158105
Page 27
EXPLODED VIEW AND PARTS LIST Item E3 E4 E6 E7 E8 E9 E10 E11 E12 F F1 F2 F3 F4 F5 F6 F7 F8 F10 F11 F12 H H5 H6 H7 H8 H8-A
BX-3
Description Flange, Inner Screw, M10 – 1.5 x 20mm Hex Flange Screw, M6-1 x 20mm Hex Head Cap Washer, M6 Split Lock Cap, Motor Cap, Motor Filter Spacer Pin, Cap Screw Filter Element Screw, #6 x 1 ½, Combo Head Pan, Tapping Assembly, Table Casting, Table Stop, Rule Screw, ¼-20 x ¾ Hex Head Cap Nut, ¼-20, Hex w/ External Tooth Washer Wheel, Roller Nut, 5/16-18, Hex w/ External Tooth Washer Wood Strip, Table Insert Screw, #8 x 1 Pan Head Phil. Casting, Squaring Arm Screw, 5/16-18 x 1 ½, Thumb Nut, 5/16-18 Square Assembly, Accessory Pack Wrench, Blade Nut Wrench, Shaft Extra Filter Element Blade, MK-BX10, Dry Cutting 14”, Segmented Blade, MK-BX30, Dry Cutting 14”, Segmented Block Owner's Manual
Revision 09/04, Effective Date September 17, 2004
Qty 1 1 4 4 1 1 2 1 2 1 1 1 4 4 4 4 1 2 1 1 1 1 1 1 1 1 1 1
MK p/n 158106 158107 158158 158159 157877 157878 157879 157729 158157 133082 158144 134387 152370 153941 133090 151051 156427 151047 231276 151155 151156 n/a 158109 158110 157729 157957 157944 158168
Page 28
