Preview only show first 10 pages with watermark. For full document please download

By Akustik

   EMBED


Share

Transcript

by RCM akustik A U D I O T E C H N O L O G Y BX 10 Dimensions are subject to tolerance variations. (All measurements in mm.) Frequency response: Description: 10" - Special bass woofer. Paper cone with extremely hard coating, wide rubber surround and double magnet. The coil core is ventilated and the basket is a rigid steel pressing. The four layer voice coil is capable of handling extreme peaks and is ideal for high power amps. The cone has a large displacement which makes it an ideal partner to the BXP10 BASSEXCITER® passive membrane . Using this combination, very low and precise bass reproduction can be achieved in relatively small enclosures. Technical Data: Sensitivity @ 2.83 V/1 m: 90 dB Power handling RMS : 300W Peak: 600W Impulse: 1200W Weight: 6kg Voice coil diameter: 50mm Voice coil height : 23,5mm Voice coil winding : 4 layers Voice coil material : Kapton™ Range : 31Hz - 200Hz Impedance response: Thiele-Small-Parameters: Nominal Impedance: 4 Ohm DC Resistance: 2,75 Ohm Voice coil inductance @ 1kHz: 2,4 mH Fs: 31 Hz Qms: 4,6 Qes: 0,29 Qts: 0,28 Sd: 346 cm² Vas: 62 litre Mms: 72 g Cms: 0,37 mm/N Rms: 3,1 kg/s Bl: 11,4 Tm PLEASE NOTE: Whilst every attempt is made to ensure the accuracy of these technical details, mistakes cannot be completely ruled out. RCMakustic accepts no liability for any loss or claim resulting from the use of this information.  2001 Copyright RCMakustik GmbH, Paderborn, Germany