Transcript
C LO C K A U D I O
SM70 SM93-SM95 MICROPHONE SHOCK MOUNTS
SA3 SA5 MICROPHONE HOLDER STAND ADAPTOR
PROFESSIONAL M I C R O P H O N E S Y S T E M S
C LO C K A U D I O SPECIFICATIONS SM70 Smooth low profile, surface fitting, shock absorbing microphone holder and base. OVERALL DIAMETER
74mm
HEIGHT ABOVE SURFACE
10mm
BODY DIAMETER
51mm
DEPTH BELOW SURFACE
50mm
FINISH
Matt Black
SM93-SM95 Elegant through table microphone shock mount. Made in lightweight ABS plastic with Female XLR connectors centrally mounted on thick shock absorbing rubber cushion. HEIGHT ABOVE SURFACE
9mm (0.35”)
WIDTH
81.9mm (3.23”)
DEPTH
86mm (3.39”)
DEPTH BELOW SURFACE
25mm (1.00”)
CUSHION CLEARANCE DIAMETER
45mm (1.77”)
FINISH
Matt Black
SM93
3pin XLR
SM95
5pin XLR
SA3 Small swivel microphone holder and stand adaptor with 5/8” - 3/8” female thread. Finished in black plastic to avoid damage and microphone scratching. Suitable for C600 series hand held microphone. SA5 Swivel microphone holder and stand adaptor suitable for D500 series microphones. With 5/8” - 3/8” female thread and a black rubber finish resistant to damage and microphone scratching.
Clockaudio Ltd - Headquarters 22 Arnside Road, Waterlooville, Hampshire PO7 7UP. UK Tel +44 (0)23 9225 1193 • Fax +44 (0)23 9225 1201 e-mail
[email protected]
PROFESSIONAL M I C R O P H O N E S Y S T E M S
Clockaudio North America Inc. 2891 du Meunier, Unit 103, Vaudreuil-Dorion, Quebec J7V 8P2. Canada Tel: (450) 424-9797 • Fax: (450) 424-3660 e-mail:
[email protected]
www.clockaudio.com As part of a continuous product improvement programme, we reserve the right to alter specifications without prior notice.
