Preview only show first 10 pages with watermark. For full document please download

C2ni/ineti-fp Architectural Faceplates For Cameo International Keypads ®

   EMBED

Share

Transcript

C2NI/INETI-FP Architectural Faceplates for Cameo® International Keypads Architectural faceplates are available for the C2NI-CB and INETI-CB Series Cameo® International Keypads to provide a stylized appearance featuring an elegant stainless steel finish inset within black or white plastic trim.[1] MODELS Available Models C2NI/INETI-FPB-T-S/STEEL:  Architectural Faceplate for Cameo® International Keypad, Black Textured w/Stainless Steel Inlay C2NI/INETI-FPW-T-S/STEEL:  Architectural Faceplate for Cameo® International Keypad, White Textured w/Stainless Steel Inlay Notes: 1.  Aluminum and plastic composition; may not be suitable for use in a sterile environment. This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041. The specific patents that cover Crestron products are listed online at: patents.crestron.com. Crestron, the Crestron logo, and Cameo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2013 Crestron Electronics, Inc. | Crestron Electronics, Inc.  15 Volvo Drive    Rockleigh, NJ 07647 Tel: 800.237.2041 / 201.767.3400 www.crestron.com | Fax: 201.767.1903 Specifications subject to change without notice. Revised 07/08/13