Transcript
IMAGE INTENSIFIER UNITS
C9016 SERIES
C9016 series
OVER VIEW Connecting a C9016 series image intensifier unit to the front of a CCD camera or CMOS camera makes it easy to capture images of low-light-level phenomena occurring at high speeds. The image intensifier can operate from a remote controller or PC via the USB interface. The C9016 series includes an excessive light protection function so users do not have to worry about damage from an increase in incident light level.
FEATURES ●High performance image intensifier
Quantum efficiency: 50 % Typ. at 530 nm (GaAsP photocathode model: C9016-01, -02) High resolution (C9016-01, -03, -05) High gain (C9016-02, -04, -06)
●Easy handling Fully controllable from a PC via the USB interface Easy-to-use remote controller
●Gate operation: 10 µs to 100 ms ●Built-in protective circuit prevents damage from excessive light
APPLICATIONS ●Biological observation under microscope ●Imaging of low-light-level emission and fluorescence ●Analysis of explosion and combustion ●Imaging of invisible light
SPECIFICATIONS Parameter C9016-01 C9016-02 C9016-03 C9016-04 C9016-05 C9016-06 Unit 280 700 Luminous sensitivity (Typ.) 170 1500 µA/lm Photocathode 62 214 Radiant sensitivity A (Typ.) 60 170 mA/W sensitivity 18 50 17 30 % Quantum efficiency A (Typ.) 17 17 mm Effective diameter B 17 Borosilicate glass Borosilicate glass — Synthetic silica Window material GaAsP GaAs — Multialkali Photocathode Photocathode material 280 to 720 370 to 920 nm 185 to 900 Spectral response range 530 800 nm 430 Wavelength of peak sensitivity — FOP Window material Phosphor — P43 Phosphor material C screen — See Figure 4 Decay time (lm/m2)/lx 1.2 × 104 5.0 × 106 Luminous gain (Typ.) 2.2 × 104 5.0 × 106 4.0 × 104 9.6 × 106 Radiant emittance gain A (Typ.) 1.4 × 104 3.4 × 106 8.7 × 103 4.0 × 106 1.2 × 104 2.7 × 106 (W/m2)/(W/m2) 3 × 10-12 1 × 10-11 2 × 10-11 Equivalent back- Luminous (Typ.) lm/cm2 ground Input (EBI) Radiant (Typ.) 8 × 10-15 3 × 10-14 4 × 10-14 W/cm2 Limiting resolution (Typ.) 64 57 64 57 64 57 Lp/mm Image magnification — 1 lx 1.4 × 10-3 6.3 × 10-6 2.6 × 10-3 6.3 × 10-6 7.9 × 10-4 3.3 × 10-6 AD Maximum input light level W/cm2 3.4 × 10-10 1.4 × 10-12 5.4 × 10-10 1.2 × 10-12 3.9 × 10-10 1.7 × 10-12 Power requirement AC 100 V to AC 240 V (when AC adapter is used) / Supplied from PC (when USB is used) — Power consumption (Max.) W 3.5 Operating ambient temperature °C 0 to +40 Storage temperature °C -20 to +50 Operating and storage humidity E % Below70 NOTE: AAt wavelength of peak sensitivity BEffective output area is 12.8 mm × 9.6 mm. Take the effective area of the camera and reduction rate of the relay lens to be used into account. CP-24 and P-46 phosphor screens are also available. DDuring normal (continuous) mode at maximum gain ENo condensation
Controllable functions Parameter Gain setting Operation mode switching Gate time fine setting Excessive light protection reset Excessive light protection display
Remote controller Yes Yes No Yes Yes
USB Yes Yes Yes Yes Yes
Operation mode Normal mode
Gain mode
Trigger input level Setting method Gate time * Delay time * Jitter (Max.)
Continuous mode C-MOS positive logic Set from PC via USB interface 10 µs to 100 ms (3 µs steps) 10 µs to 100 ms (3 µs steps) 1.5 µs
NOTE: * When using the USB interface, the following conditions must be met. D (ms) + W (ms) + 2 (ms) < = T (ms) where D is the delay time, W is the gate time and the T is the trigger input interval.
Protective functions Excessive light protection Shuts off operation during excessive light warning. Red LED flashes During excessive light warning Excessive light (on rear of head and remote controller operation panel) protection display* During shut off Red LED is lit continuously operation (on rear of head and remote controller operation panel) 500 Hz: Red LED is lit during shut off operation. Repetition rate (Max.)* (200 Hz Max. during communication) Reset switch on remote controller Protection circuit reset or command via USB interface NOTE: * The LED on the rear side of the head can be turned on / off by control from a PC.
CHARACTERISTICS Figure 1: Typical spectral response characteristics 103
TAPPB0079EC
107
C9016-03, -04 (MULTIALKALI PHOTOCATHODE)
TAPPB0083ED
C9016-01, -02 (GaAsP PHOTOCATHODE)
C9016-06
106 102
LUMINOUS GAIN (lm/m2)/lx
CATHODE RADIANT SENSITIVITY (mA/W) QUANTUM EFFICIENCY (%)
Figure 2: Typical luminous gain
101
C9016-05, -06 (GaAs PHOTOCATHODE)
100
C9016-02, -04
105
C9016-05 C9016-01
104
103 C9016-03
102 CATHODE RADIANT SENSITIVITY QUANTUM EFFICIENCY 10-1 100 200 300 400 500 600 700 800 900 1000
101 Min.
Max.
WAVELENGTH (nm)
GAIN SETTING
Figure 3: Typical phosphor screen spectral emission 100
Figure 4: Typical phosphor screen decay characteristics
TAPPB0080EA
102
TAPPB0081EA
80
60
RELATIVE INTENSITY (%)
RELATIVE INTENSITY (%)
P-43
P-24 P-43
40 P-46 20
0 350
400
450
500
550
600
WAVELENGTH (nm)
650
700
P-24 101
P-46
100 ns 100 100 ns
100 ns
10 µs 1 ms
1 ms INPUT LIGHT PULSE WIDTH 10-1 10-8
10-7
10-6
1 ms 10-5
10-4
DECAY TIME (s)
10-3
10-2
DIMENSIONAL OUTLINES (Unit: mm) Head
Remote Controller
34.3 0.5
OUTPUT WINDOW
C-MOUNT
50
4 × M3
CONNECTION CABLE TO HEAD
TRIGGER INPUT
OUTPUT WINDOW
2000
48 116
32
CONNECTOR (AUX) FOR REMOTE CONTROLLER POWER SWITCH
REAR VIEW
47
POWER/ PROTECTION DISPLAY LED
GAIN ADJUSTMENT KNOB
AC ADAPTER CONNECTOR
POWER/PROTECTION DISPLAY LED SIDE VIEW
FRONT VIEW
90 30
RESET SWITCH
1
30
OPERATION MODE SELECTOR SWITCH NORMAL/GATE
111
REAR VIEW
66
4
USB CONNECTOR
4 × M3
REMOTE CONTROLLER
(Weight: Approx. 570 g) 1/4"-20UNC
45
70
29
TOP VIEW
SIDE VIEW
BOTTOM VIEW
(Weight: Approx. 300 g) TAPPA0061ED
TAPPA0062ED
SETUP EXAMPLE WITH OPTICAL ACCESSORIES CCD CAMERA WITH FIBER OPTIC WINDOW C12550 SERIES
PC
IMAGE ACQUISITION SOFTWARE
USB CABLE AC ADAPTER AC100 V to 240 V
CCD CAMERA WITH FIBER OPTIC WINDOW C9018/-01/-04 CAMERA CABLE A5963 SERIES OBJECTIVE LENS WITH C-MOUNT
AC ADAPTER A10059-01/-02
VIDEO OUTPUT (EIA, CCIR, Progressive scan) AC100 V to 240 V
F-MOUNT–C-MOUNT 1: 1 RELAY LENS CONVERTER ORCA Flash4.0 V2 A4539 A2095
MICROSCOPE
3: 2 RELAY LENS A11669
C9016 SERIES HEAD
ATTACHMENT FOR MICROSCOPE
RELAY LENS ADAPTER A9017
2: 1 RELAY LENS A2098
DIGITAL CCD CAMERA (2/3 INCHES)
CCD CAMERA (1/2 INCH)
IMAGE INTENSIFIER UNIT
IMAGE INTENSIFIER UNIT (C9016 SERIES) ACCESSORIES (SOLD SEPARATELY)
CD-ROM CONTROL SOFTWARE
CD-ROM USB CABLE 2 m4
Hipic (Version 9.3pf4 or later) PC (USB)5
Connections REMOTE CONTROLLER3
TRIGGER INPUT
REMOTE CONTROLLER
AC CABLE2
AC ADAPTER1
100 V to 240 V
The recommended connections differ depending on the operation mode and gain control method for the C9016 series. Operation Gain control Connections DC Remote control 1 2 3 DC PC 4 5* Selectable by Gate 1 2 3 4 5 control software * Also connect 1 and 2 when using a notebook PC.
TAPPC0109EG
Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2015 Hamamatsu Photonics K.K.
HAMAMATSU PHOTONICS K.K.
www.hamamatsu.com
HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater. N.J. 08807-0910, U.S.A., Telephone: (1)908-231-0960, Fax: (1)908-231-1218 E-mail:
[email protected] Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49)8152-375-0, Fax: (49)8152-2658 E-mail:
[email protected] France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: (33)1 69 53 71 00, Fax: (33)1 69 53 71 10 E-mail:
[email protected] United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44)1707-294888, Fax: (44)1707-325777 E-mail:
[email protected] North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 SE-164 40 Kista, Sweden, Telephone: (46)8-509-031-00, Fax: (46)8-509-031-01 E-mail:
[email protected] TII 1062E01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39)02-93581733, Fax: (39)02-93581741 E-mail:
[email protected] China: Hamamatsu Photonics (China) Co., Ltd.: B1201 Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86)10-6586-6006, Fax: (86)10-6586-2866 E-mail:
[email protected] SEPT. 2015 IP
