Transcript
CA-360 FAQ Q: Can I use more than one of each accessory with my CA-360? A: Yes, but there are limits for different accessories; please check the user manual for details. Q: How does the CA-AX detect the alarm? A: The CA-AX senses the audio alarm from either smoke detectors or carbon monoxide detectors and sends a wireless signal to activate the CA-360. Q: What are T3 and T4? A: T3 and T4 are specific audio patterns for alarms. T3 are usually used by smoke alarms and T4 are usually used by CO alarms. The CA-AX and CA-360 is the only sensor that is compatible with both T3 and T4 alarms on top of regular audio alarm patterns. Q: How is the CA-360 superior than any other similar products? A: The CA-360 has the latest 2.4 GHz Transmission Technology that covers every corner of your home without any interference from any electrical sources. It is the only system that responds to virtually all audio alarm systems, even the newer alarms with the T3 or T4 alarm sounds. It is also the only system that monitors and responses to baby cries in real-time, that means it stops alerting you when the baby stops making any noise. And, it is the only system that alerts you to weather warnings from NOAA. Furthermore, it is the only system that provides dual alarm clock settings. In short, it's not only more reliable, it also offers more coverage than any others. Q: What is the range of the CA-360? A: It has a designed range of 200+ ft; it should be more than enough to cover every corner of a large home. Q: How loud is the audio alarm? A: The CA-360 can be as loud as 90dB at 1 foot of distance. Q: Will my CA-360 interfere with my neighbor’s system? A: No. The Smart Code technology of the CA-360 automatically generates an operating code that is unique only to your system and your accessories. The Smart Code can support up to thousands of CA-360 in the same vicinity without any system interferences. Q: How do I setup the accessories to work with my CA-360? A: It is easy. The CA-360 has a "learn" mode that automatically pairs up with each accessory and it only takes seconds to set up. Q: Does the CA-360 have battery power backup? A: Yes, it uses 4 AA rechargeable batteries (not included) as power backup and it will last up to 48 hours of operation. However, batteries are not necessary for normal operation, but we strongly recommend you install the batteries in case of a power outage. Q: What happens when there is a power outage? A: During a power outage, the CA-360 runs on the back-up batteries and all its functions are operational as normal. However, to save power, its clock display will light up to show the time only once every minute. For added security and convenience, the built-in flasher of the CA-360 can be used as an emergency flashlight during a power outage.
Q: How do I get Multiple CA-360's to work together? A: Refer to page 14 for information on subbing additional CA-360's Q: My new CA-360 displays Batt and then ascending count starts flashing when I turned it on. What do I do? A: Press and hold the reset snooze button for 6 seconds. It will reset the battery warning.
