Preview only show first 10 pages with watermark. For full document please download

Cabac Datasheet - Iec C14 To C15 Power Cable 2 Metre

   EMBED


Share

Transcript

PRODUCT DATASHEET IEC C14 TO C15 – 2 METER POWER CABLE The 40IEC141502 is a slightly unusual power cable as it has connectors from different male-female pairing. Namely it has a C14 (male/plug), from the usual C13/C14 pairing, on one end and a C15 (female/socket), from the C15/C16 pairing, on the other end the C15 female connector has the same pin array as a C13. However the C15 has a notch at the base. The C15 can be plugged into the C14 or C16 inlets while the C13 is limited to the C14 inlet. This cable is required when one is trying to connect an equipment with a C13 socket to another equipment with a C16 plug. This situation can often be found with computers and servers of certain brand/make. The cable connection combo, therefore, is often required in computer/data room or IT environment. The cable is further complicated by the differences in standards requirements. As C15/C16 connectors are traditionally associated with equipment with slightly elevated temperature, the cable will have to be rated similarly. The 40IEC141502 is tested to the relevant Australian Standards for trouble free power connection and peace of mind. FEATURES • Power cable with unusual C14-C15 pairing • Tested to Australian Standards for peace of mind • Black cord and connectors to blend in with equipment • 2 meter long cable SPECIFICATIONS Max. Ampere Voltage Colour Cable length 10A 250Va.c. Black 2m IEC C14 TO C15 – 2 METER POWER CABLE Part No: 40IEC141502 PACKAGE CONTENTS 1x C14 to C15 power cable POWER CABLE CONNECTOR MATING SHAPES C13/C14 C15/C16 CABAC has a policy of continuous product improvement and reserves the right to change materials and specifications without notice. Drawings, where used, are not to scale. All dimensions are in millimetres and sizes given are approximate. Where available, technical and MSDS data sheets are available on the CABAC website. All CABAC products should be installed and used in accordance with manufacturer’s instructions provided. Warning: products may be the subject of registered designs and patents. Refer to CABAC website for terms and conditions on warranty. The one day, one call, one delivery does not cover the following items: Cabchem, Cast Resin kits, Custom manufacturing & kitting, Cabinets, Ladders, Pits & Pillars, CABTRAY & Branch stock orders. Ph: 133 122