Preview only show first 10 pages with watermark. For full document please download

Cabinet Installation Typical 334 Series Dms

   EMBED

Share

Transcript

2 F&I POWER CABLE TO DMS-TERMINATE AT EACH END 12/3/2015 3 INSTALL 334MP DMS CONTROL CABINET (MNDOT PROVIDED) F&I SERVICE EQUIPMENT AS CALLED IN PLANS F&I 1-FO PIGTAIL-PLACE SLACK LOOP OF PIGTAIL CABLE WITHIN CABINET AGAINST SIDEWALL. CONNECT ARMOUR TO NORSCAN DEVICE-TERMINATE END & LAND IN PATCH PANEL 4 INSTALL (MNDOT PROVIDED) FO PIGTAIL (6MM) TO DMS-(TERMINATED BY DMS MANUFACTURER) (PROVIDE 10' SLACK IN CABINET & 40' SLACK IN SIGN) F&I 1-1/C NO.6 BARE GROUND WIRE-COAT CONNECTION PLOTTED: WITH ANTI-OXIDIZING AGENT FIBER SPLICE/PATCH DRAWER 6 INSTALL NEOPRENE GASKET (SUPPLIED BY MNDOT) 7 SHEATH GROUNDING UNIT 3 DMS METER CONTROLLER SOCKET INNER SHELF JACKET NORSCAN GROUND LEAD 4 CUSTOMER F&I FIBER OPTIC SHIELD BOND SECTION 7 CONNECTOR ASSEM. STRIP OUTER CABLE JACKET & ARMOUR F&I 1-FO PIGTAIL TO WITHIN 18" OF (OTHER CABLES NOT CONDUIT OPENING SHOWN FOR CLARITY) EQUIP. GROUND BUSS 2 CONDUIT BREAKERS CAB INSTALL_dt1.dgn TMS 12:45:49 PM F&I POWER CABLE FROM SOURCE OF POWERTERMINATE AT TERMINAL BLOCK 5 c:\projectwise\pw_working\cooz1sco\d1747103\DMS 334 cooz1sco MDROSFRW7D023 1 3 1 5 GROUND NEUTRAL 1 F&I 3'x5'x1' FOUNDATION (TYP.) 5 5 FRONT VIEW 6 FO PIGTAIL GROUNDING NOT TO SCALE 4" 12" 8" 3/4" NMC TO SECONDARY 5/8"X15' GROUND ROD SET 6' FROM CAB. GND. ROD (SET TOP BELOW GRADE) F&I 3'x3'x4" SIDEWALK (FRONT AND BACK) (TYP.) F&I 1.5" CONDUIT 5 F&I CONDUITS TO SOP F&I 3" CONDUIT STUB TO HH/PV (ONE PER FOUNDATION) F&I CONDUITS PER DETAILS & PLAN POWER TO DMS CAP F&I 5/8" X 15'GROUND ROD ON BREAKER SIDE OF SERV. CAB. NOTE: PLACE GROUND ROD WITHIN 334 CAB IF SERVICE IS NOT PRESENT ON PAD. TYPICAL 334 SERIES DMS CABINET INSTALLATION TYPICAL DMS 334 CABINET INSTALLATION REV. NO. DATE: / / REV. NO. DATE: / / CERTIFIED BY LIC.NO. LICENSED PROFESSIONAL ENGINEER DATE 2016 STATE PROJ. NO. XXXX-XXX (TH XXX) SHEET NO.XXXX?OF XXXXX SHEETS