Transcript
specifications
®
Cable management rack shall be constructed of steel and capable of mounting as 19" or 23" EIA rack. The vertical channels shall have side and front pass through holes. The vertical channels shall have slots that can accommodate plastic d-rings, plastic finger duct and spools to provide vertical cable management. The rear of the channel shall have an open flange design that allows access to cables inside channel. The top of the rack shall have integral waterfalls that feed to the front and center of the vertical channels. The rack shall be capable of accepting steel, full length, hinged doors.
NETWORK CONNECTIVITY GROUP
SPEC SHEET
NETFRAME ™ Cable Management Rack System technical information Dimensions:
Standards: Packaging:
NFR84 (19"): HxWxD = 86.0x28.4x17.0in. (2183x721x432mm) NFR84 (23"): HxWxD = 86.0x32.4x17.0in. (2183x823x432mm) Meets all EIA requirements as defined in EIA-310-D Packaged with 2 vertical channels, top and bottom brackets, a grounding lug, assembly hardware and installation instructions
key features and ...benefits Modular system
Multiple vertical cable management options install easily and allow user to configure system to their preferences
Mounts as 19" or 23" EIA rack
Suitable for a variety of applications
Rack spaces identified (Numbered at each 5th position)
Allowing for quick and easy location of rack spaces speeding installation of horizontal rack mount items
1500 lb load rating
Accommodates large networking equipment
Deep vertical channel
Provides pathway for distribution cable
Open rear channel
Provides easy access to cables inside of vertical channel simplifying moves, adds and changes
Optional hinged metal door
Provides easy access to vertical pathway without having to completely remove door
Integral waterfalls
Provides bend radius control for cables as they go to the front and inside of the vertical channels
Pass through holes
Located on front and side to allow access from the patching surface to the back of equipment as well as between racks
applications The NETFRAME Rack System is designed to support heavy networking equipment and can be used in cross-connect and interconnect applications in a telecommunications room. The NETFRAME System is completely modular and can manage high performance copper and fiber patch cables.
NETFRAME Rack System 19" or 23" x 7ft : NFR84 NETFRAME Vertical Cable Management Options 4"x6" d-ring kit (8): NFDR4X6K 4"x5"x7ft duct : NFVD4X584 Fiber slack spool: NFSK NETFRAME Shelves 19" W x 18" D: 19" W x 25" D:
NFSHLF19X18 NFSHLF19X25
NETFRAME Accessories Hinged metal door (4"x7ft): Ladder rack bracket: End panel: Fiber slack manager:
NFD484 NFLRB NFEP NFVSM
Troughs 19" lower: 19" upper:
CMLT19 CMUT19
Power Strips 19" Horizontal 15 amp: CMRPSH15 20 amp: CMRPSH20 Power Strips 20 amp Vertical 39" single circuit: CMRPSV20 66" dual circuit: CMRPSVD20
installer tip This modular rack system is compatible with the PANDUIT ® horizontal cable management panels, including the NETMANAGER ™ Cable Manager and OPEN-ACCESS ™ D-ring options, OPTICOM ™ fiber optic enclosures and MINI-COM ® patch panels.
V i s i t o u r w e b s i t e a t : w w w. p a n d u i t . c o m / n c g
The NETFRAME shelves have a load rating of 200lbs making them great for use with large pieces of active equipment.
NETFRAME ™ Cable Management Rack System Floor Footprint For NETFRAME Rack 28.40" = 19" Rack (721.4mm)
5
Front of Rack
NETFRAME Rack Spacing Identification
17.00" (431.8mm)
NFR84
11.00" (279.4mm)
6.00" (152.4mm)
NFLRB
10
NFD484
23.88" (606.6mm)
NFVD4X584 NFVSM
NFEP
NFDR4X6K
NFSK
NFSHLF19X18 — 18" DEEP NFSHLF19X25 — 25" DEEP For a copy of PANDUIT ® product warranties, log on to www.panduit.com/warranty
NETWORK CONNECTIVITY GROUP PANDUIT CANADA Markham, Ontario Phone: 800-777-3300
PANDUIT EUROPE LTD. London, UK Phone: 44 208-601-7200
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
For a full line catalog, please contact Customer Service and ask for SA-NC10CB01A
PANDUIT CORP. Tinley Park, Illinois 60477-3091 Customer Service: 800-777-3300 Technical Support: 866-405-6654 Email:
[email protected] Internet: www.panduit.com/ncg PANDUIT SINGAPORE PTE. LTD. Republic of Singapore Phone: (65) 6379 6700
© PANDUIT Corp.
Contact your local authorized PANDUIT distributor for pricing. For your local Sales Office call 800-777-3300
PANDUIT JAPAN Tokyo, Japan Phone (81) (3) 3767-7011
PANDUIT LATIN AMERICA Jalisco, Mexico Phone: (52) 3 666-2501
ALL RIGHTS RESERVED
Printed in U.S.A.
PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia Phone: (61) 3-9794 9020
WW-RKSP01 12/2002
