Transcript
Quick Use and Setup Guide
Projection Television
TABLE OF CONTENTS 11
12
NOTE: This owner's manual is used with several different television models. Not all features (and drawings) discussed in this manual will necessarily match those found with your television set. This is normal and does not require you contacting your dealer or requesting service. WARNING: TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS UNIT TO RAIN OR EXCESSIVE MOISTURE.
Getting Started
1 2
10
IMPORTANT
3
9
Warning/Important Notice . . . . . . . . . . . . . .1 Making Basic Antenna/Cable Hookups . . . .1 Using the TV Buttons . . . . . . . . . . . . . . . . . . . . . . . .2 Using the Remote Control Buttons . . . . . . . . . . . . . .2 Setting the TV’s On-screen Menu Language . . . . . . .3
Setting the Tuner Mode Control . . . . . . . . . . . . . . . .3 Running Auto Program . . . . . . . . . . . . . . . . . . . . . . .3 Editing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Using AutoChron to Set the TV’s Clock . . . . . . . . . .4 Naming Channels . . . . . . . . . . . . . . . . . . . . . . . . . . .4
4
8
7
6
5
AutoChron, Incredible Surround, SmartPicture, and SmartSound are trademarks of Philips Consumer Electronics Company. Copyright © 2001 Philips Consumer Electronics Company. All rights reserved.
HOOKING UP YOUR TV (BASIC TV CONNECTIONS) CABLE TV CABLE INPUT/CONVERTER
Y
our Cable TV input into your home may be a single (75 ohm) cable or a converter box installation. In either case, the connection to the TV is very easy. Just put the threaded end of the cable signal to the TV’s antenna plug and screw it down tightly.
If your Cable TV signal comes from a single round cable (75 ohm), then you're ready to connect to the TV. If you have a cable converter box, connect the cable TV signal to the cable signal IN(put) plug on the converter.
SMART HELP
Connect the cable TV cable to the ANTENNA IN 75Ω plug on the TV. If you have a cable converter box, connect the OUT(put) plug from the converter to the ANTENNA IN 75Ω (ohm) plug on the TV.
Use the Auto Program feature to store in the TV’s memory only the channels with active broadcast stations. See page page 3 for details.
2
Cable TV Company
ANTENNA IN 75Ω
Cable TV Signal Input
MONITOR OUT
ANTENNA IN 75Ω
AV1 IN
AV2 IN
ANTENNA IN 75Ω
AV1 IN
AV2 IN
Y VIDEO Pb
AUDIO
S-VIDEO
Pr
R
VIDEO
OR
Pb
S-VIDEO
Back of TV
MONO/L AUDIO
NOTE: The connecting cable for the converter is supplied by the cable TV company.
MONITOR OUT
MONO/L
Y
Pr
R
Cable TV Converter Box Connection
OUT
IN
Round Cable 75Ω (Ohm)
1
ANTENNA COMBINATION UHF/VHF
A
combination antenna receives normal broadcast channels (VHF 2–13 and UHF 14–69). Your connection is easy because there is only one ANTENNA IN 75Ω (ohm) plug on the back of your TV, and that’s where the antenna goes.
If your antenna has a round cable (75 ohm) on the end, then you're ready to connect it to the TV. If your antenna has flat, twinlead wire (300 ohm), you first need to attach the antenna wires to the screws on a 300- to 75ohm adapter.
Push the round end of the adapter (or antenna) onto the ANTENNA IN 75Ω plug on the back of the TV. If the round end of the antenna wire is threaded, screw it down finger tight.
NOTE: For homes with separate UHF and VHF antennas, you will need an optional combiner to connect to the TV. U/V Combiner
ANTENNA IN 75Ω
MONITOR OUT
AV1 IN
AV2 IN
Y VIDEO Pb
S-VIDEO
MONO/L AUDIO
Pr
R
Back of TV
SMART HELP To get optional accessories to make the connections shown here, contact your dealer, or our Parts Information Center at 1-800-851-8885.
300- to 75-Ohm Adapter 300Ω (Ohm) to 75Ω (Ohm) Adapter
1
2
ANTENNA IN 75Ω ANTENNA IN 75Ω
MONITOR OUT
AV1 IN
AV2 IN
MONITOR OUT
ANTENNA IN 75Ω
AV1 IN
AV2 IN
Y VIDEO Pb
S-VIDEO
MONO/L AUDIO
Pr
R
Y
Combination VHF/UHF Antenna (Outdoor or Indoor)
VIDEO
Twin–Lead Wire
Pb
OR
S-VIDEO
Back of TV
MONO/L AUDIO
Pr
R
Round Cable 75Ω (Ohm)
TV TO VCR BASIC CONNECTION
F
ollow the steps to the right to connect a basic antenna or cable TV signal to a VCR, and then the VCR to the TV. For information on other hookups (possible when cable/descrambler boxes are included), refer to the owner’s manuals for the VCR and the cable converter.
Connect your antenna or cable TV signal to the IN FROM ANT(enna) plug on the VCR. Outdoor VHF/UHF Antenna
300Ω (Ohm) to 75Ω (Ohm) Adapter
Connect the OUT TO TV plug on the VCR to the ANTENNA IN 75Ω plug on the TV (connecting cable supplied with the VCR).
1
Refer to the owner's manual included with your VCR for other possible connections and TV/VCR operating details.
Round Cable 75Ω (Ohm) Supplied with VCR
2
OR IN FROM ANT.
OUT TO TV ANTENNA IN 75Ω
MONITOR OUT
AV1 IN
AV2 IN
Y VIDEO
Cable TV signal
Pb
S-VIDEO
MONO/L AUDIO
Pr
ANTENNA IN 75Ω
MONITOR OUT
AV1 IN
AV2 IN
Y VIDEO Pb
R
VCR
S-VIDEO
MONO/L AUDIO
Pr
R
Back of TV
1
3135 035 20212
TV AND REMOTE CONTROL OPERATION TELEVISION Press the POWER/STANDBY button to turn the TV on. Allow about 10 seconds for the TV power on.
Press the VOL (+) button to increase the sound level or the VOL (–) button to lower the sound level. Pressing both buttons at the same time will display the onscreen menu. After you are in the menu, use these buttons to make adjustments or selections.
VOL
Press the CH ▼ (down) or ▲ (up) button to select TV channels. Use these buttons to make adjustments or selections in the on-screen menu. NOTE: Press three number buttons on the remote control for channels 100 or above. For example: Press 1 then 2 then 5 for channel 125.
Point the remote control toward the remote sensor window on the TV to use the remote to operate the TV.
CH
MENU Remote Sensor Window
REMOTE Battery Usage CAUTION—To prevent battery leakage which may result in bodily injury or damage to the unit: • Install ALL batteries correctly, + and – as marked on the unit. • Do not mix batteries: (OLD and NEW or CARBON and ALKALINE, etc.) • Remove batteries when the unit is not used for a long time.
1
3
2
BATTERY INSTALLATION
SAP i+
AV
TV
4
To load the supplied batteries into the remote:
T SMAR
VCR ACC
F
SUR
T SMAR
U
MEN
CH
1. Remove the battery compartment lid on the back of the remote.
A/CH
PIP RR.
. SU
INCR
2. Place the batteries (2- AA) in the remote. Be sure the (+) and (–) ends of the batteries line up correctly (the inside of the case is marked).
PIP
CH
DN
UP
3. Reattach the battery lid.
Sleep Button
Power Button
Press to set the TV to automatically turn itself off. Press to set the TV to automatically turn itself off after a period of time. Choose 15, 30, 45, 60, 90, 120, 180, or 240 minutes before the TV will automatically turn off.
Press to turn the TV on and off.
SAP Button AV
A/V Button
TV
Press repeatedly to select the different signal sources connected to the TV.
VCR
TV/VCR/ACC Mode Switch
ACC
Slide to position of TV to control TV functions, VCR to control VCR functions and ACC for cable converter, satellite receiver, DVD, and laser disc accessory device functions.
i+ (on-screen display) Button
Press to select an SmartSound control. Choose from three factory-set controls (VOICE, MUSIC, and THEATRE) and a PERSONAL control that you set according to your own preferences through the on-screen Sound menu. The three factory-set controls will tailor the TV sound to enhance the type of program you are watching.
Press to select Second Audio Program (SAP) if available with the program you are watching.
SAP
1
2
3
4
5
6
7
8
Clock Button Press the CLOCK button to access the Timer menu, where you can manually set the clock.
Number Buttons
9
SMART
SMART
0
Press to see the current channel number on the TV screen. Also press to clear the TV screen after control adjustments.
SmartSound Button
i+
MENU
SURF
Menu Button Press for the on-screen menu to appear. Pressing the menu button after menu selections are made will eliminate the menu from the display.
CH
SmartPicture Button Press to select an SmartPicture control. Choose from four factory-set controls (MOVIES, SPORTS, WEAK SIGNAL, and MULTIMEDIA) and a PERSONAL control that you set according to your own preferences through the on-screen PICTURE menu. The four factory-set controls will tailor the TV picture to enhance the particular type of program you are watching or to improve the picture of a program with a weak broadcast signal.
Surf Button Press to quickly view a list of up to 10 channels you have placed in memory. Go to the channels directly from the Surf screen. (Details are in the Directions for Use manual. )
Cursor Buttons (Left, Right, Up, Down) Press these buttons to highlight, select, and adjust items on the TV's on-screen menu.
Volume (+) or (–) Buttons
Press the number buttons to select TV channels. When selecting single-digit channels, press the number of the desired channel. The TV will pause for a few seconds and then tune to the selected channel. (Note: You can also press 0, then the number.) For channels 100 and above, first press 1 then the next two numbers of the desired channel.
CH(annel) Scan (+) or (–) Buttons INCR. SURR.
Press to change the tuned channel.
PIP
A/CH
Press to adjust the TV sound level.
VCR §§, ■, ©, ©©, II Buttons
Mute Button
Press to rewind, stop, play, fast forward, or pause a videotape.
Press to turn the TV sound off. Press again to return the sound to its previous level.
Incr. Surr. Button
A/CH Button PIP CH UP
DN
Press to toggle between the currently viewed channel and the previously viewed channel.
Press to select various factory Surround Sound listening modes.
SMART HELP
PIP Buttons Press to operate Picture-In-Picture features. See the PIP section in the Directions for Use manual for details.
Remember, you can press any button on the front of the TV to turn the TV on. The tuned channel number will always briefly appear on the screen when the TV is first turned on (and when the channel is changed). You also can press the i+ button (on the remote control) to see what channel the TV is on. 2
HOW TO USE THE INSTALLATION FEATURES LANGUAGE Press the MENU button on the remote control to show the on-screen menu.
or or Spanish- and French-speaking TV owners, an on-screen LANGUAGE option is present. The LANGUAGE control enables you to set the TVÕs on-screen menu to be shown in either English, Spanish, or French.
F
Press the CURSOR DOWN button repeatedly until INSTALL is highlighted.
LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
PICTURE SOUND FEATURES INSTALL
INSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
6 VC
4
7
SM
5
0
M ME EN NU U
2
5
5
8
AR T
P
Remember, the LANGUAGE control makes only the TVÕs on-screen menu items appear in English, Spanish, or French text. It does not change the other on-screen text features, such as Closed Captioning (CC), with TV shows.
4
CH
UR
R.
Press the CURSOR UP or CURSOR DOWN button to select ENGLISH, ESPA„OL (Spanish), or FRANCAIS (French). Press the i+ button to clear the menu from the screen.
SMART HELP
AR T
3 R. S
Press the CURSOR RIGHT button to highlight the LANGUAGE control options area.
3
6
9
SM
SA
2
S SU UR RFF
INC
ENGLISH FRANCAIS ˜ ESPANOL
i+
1
R
AC C
INSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
AV
TV
1
Press the CURSOR RIGHT button to enter the INSTALL menu.
PIP A/C
Pressing the i+ button on your remote control after making adjustments to the TV will remove the menu from the screen. You also can back out of the menu by repeatedly pushing the menu button on your remote control.
H
U UP P
PIP
CH
TUNER MODE Press the MENU button on the remote control to show the on-screen menu.
S
et the TUNER MODE control according to the type of signal you have connected to the TV: ANTENNA or CABLE. If you select AUTO, the TV will automatically detect the type of signal you have connected.
Press the CURSOR DOWN button repeatedly until INSTALL is highlighted.
Press the CURSOR DOWN button once to highlight TUNER MODE.
Press the CURSOR RIGHT button to enter the INSTALL menu.
Press the CURSOR RIGHT button to highlight the tuner options area.
Press the i+ button to clear the menu from the screen.
PICTURE SOUND FEATURES INSTALL
LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
INSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
7 AV
TV
1
VC AC C
4
7 0
SA
3
6
9
SM
INSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
P
2
5
8
AR T
M ME EN NU U
i+
1
R
SM
Press the CURSOR DOWN button until the dot and triangle are to the left of the option that matches your signal connection. If you want the TV to determine the type of signal, select AUTO.
AR T
INSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
AUTO CABLE ANTENNA
S SU UR RFF
SMART HELP
3 INC
R. S
CH
UR
R.
2
PIP A/C
H
U UP P
PIP
4
CH
5
When CABLE is selected, channels 1–125 are available.
6
D DN N
When ANTENNA is selected, channels 2–69 are available.
AUTO PROGRAM Press the MENU button on the remote control to show the on-screen menu.
A
UTO PROGRAM will scan for and store only channels with active broadcast stations in th TV’s memory. After you run AUTO PROGRAM, you can use the CH(annel) Scan (+,–) buttons to quickly and easily select stations.
Press the CURSOR RIGHT button to enter the INSTALL menu. PICTURE SOUND FEATURES INSTALL
VC
R
AC C
SM
4
7
AR T
M ME EN NU U
0
8
5 9
SM
P
6
CH
UR
R.
PIP A/C
H
U UP P
PIP
CH
4
Press the i+ button to clear the menu from the screen.
Press the CURSOR RIGHT button to start the Auto Program scanning of channels.
SEARCH
INSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
CABLE PLEASE WAIT CHANNEL 12
3
6
AR T
2
Press the CURSOR DOWN button repeatedly until the AUTO PROGRAM control is highlighted.
INSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
SA
2
3 R. S
INSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
i+
1
S SU UR RFF
INC
LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
AV
TV
1
Press the CURSOR DOWN button repeatedly until INSTALL is highlighted.
5
SMART HELP After youÕve run Auto Program, check the results. Press the CH(annel) (+, Ð) button and see which channels you can select.
D DN N
3
Remember, an antenna or cable TV signal must first be connected to your TV (see instructions for making connections on page 1 of this guide).
If you want to delete any unwanted channels from the TVÕs memory, see the ÒCHANNEL EDITÓ section on page 4.
HOW TO USE THE INSTALLATION FEATURES CHANNEL EDIT HANNEL EDIT makes it easy for you to add or delete channels from the list of channels stored in the TVÕs memory.
C
Press the MENU button on the remote control to show the on-screen menu.
Press the CURSOR RIGHT button to enter the INSTALL menu.
Press the CURSOR RIGHT button to access the CHANNEL EDIT menu.
Press the CURSOR DOWN button repeatedly until INSTALL is highlighted.
Press the CURSOR DOWN button repeatedly until the CHANNEL EDIT control is highlighted.
Press the CURSOR UP or CURSOR DOWN button to scroll through the list of available channels. Or press the NUMBER buttons on your remote control to select a specific channel (for example, press 0 and then 2 to select channel 2).
PICTURE SOUND FEATURES INSTALL
8 AV
TV
1
VC AC C
SM
4
7 0
6
P
3
6
9
SM
SA
2
5
8
AR T
M ME EN NU U
i+
1
R
LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
INSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
INSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
INSTALL LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
AR T
S SU UR RFF
3 SU
CH
RR
2
.
PIP A/C
H
5
4
PC
66 67 68 69 AV1
With the channel you want to edit selected, press the CURSOR RIGHT button to mark the channel as SKIPPED. The channel youÕve marked SKIPPED will not appear when you are changing from channel to channel while watching TV. When you want to add a channel that has been marked SKIPPED, press the CURSOR UP or CURSOR DOWN button to highlight the channel; then press the CURSOR RIGHT button to remove the word SKIPPED.
SKIPPED SKIPPED SKIPPED SKIPPED
Press the i+ button to clear the menu from the screen.
7
6
H D DN N
AutoChron Press the MENU button on the remote to show the on-screen menu.
utoChron can automatically set the TVÕs onscreen clock. Because the time is received from a broadcast signal, you must be sure you have a signal source connected before you attempt to use the AutoChron feature.You will also need to know the channel number of your Public Broadcasting Station.
A
Follow these on-screen instructions to set AutoChron automatically.
Press the CURSOR DOWN button repeatedly until INSTALL is highlighted.
Press the CURSOR RIGHT button again to select AUTO. Within a few seconds, a menu containing the time zone options will appear.
Press the CURSOR RIGHT button to enter the AutoChron SET TIME area.
INSTALL LANGUAGE LANGUAGE TUNER MODE AUTO PROGRAM TUNER MODE CHANNEL EDIT AUTO PROGRAM CHANNEL EDIT AutoChron AutoChron
INSTALL
INSTALL ENGLISH LANGUAGE FRANCAIS TUNER ESPANOL AUTO PROGRAM CHANNEL EDIT AutoChron
INSTALL
SET TIME AUTO MANUAL
LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
AUTO MANUAL
ENTER TIME 11:00 AM
When finished, press the i+ button to clear the menu from the screen.
INSTALL
INSTALL
LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
SET TIME
NOTE: When setting the clock manually, press the number buttons on the remote control to enter the time. Remember to set AM or PM with the CURSOR UP or DOWN button.
INSTALL
LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
INSTALL
SET TIME LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AUTO MANUAL AutoChron
Use the NUMBER buttons on your TV remote to enter the channel number for your PBS station. NOTE: If you enter the wrong channel number for your PBS station, the time will not be found and you will be prompted to enter another channel number.
Press the CURSOR UP or DOWN button to highlight your correct time zone. Then press the CURSOR RIGHT button. Go through the same process for the Daylight Savings time option.
Press the CURSOR RIGHT button to enter the INSTALL menu.
PICTURE SOUND FEATURES INSTALL
Follow these on-screen instructions to set AutoChron manually.
Press the CURSOR DOWN button until the AutoChron control is highlighted.
TIME ZONE?
CENTRAL MOUNTAIN PACIFIC
INSTALL
LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
DAYLIGHT SAVING TIME? YES NO
LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
SEARCH FOR TIME ENTER CHANNEL 02 PBS
INSTALL
LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
SEARCH FOR TIME PLEASE WAIT 15 PBS
LANGUAGE TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
SEARCH FOR TIME TIME FOUND PRESS EXIT TO END 11:15 AM
NAME he channel NAME feature allows you to list the ÒcallÓ letters of your favorite stations beside their channel numbers when they appear on the screen. The TV has in memory a list of the 50 most popular channel names (ABC, NBC, FOX, for example). You can also enter a PERSONAL name of up to five characters.
T
Press the MENU button on the remote control to show the on-screen menu.
Press the CURSOR DOWN button repeatedly until the NAME control is highlighted.
Press the CURSOR DOWN button repeatedly until INSTALL in highlighted.
Press the CURSOR RIGHT button to highlight the NAME options area.
Press the CURSOR RIGHT button to enter the INSTALL menu.
PICTURE SOUND FEATURES INSTALL
1
AV
TV VC
R
AC C
SM
4
7
AR T
M ME EN NU U
0
8
i+
1
SA
P
2
5
6
9
SM
3
8
LANGUAGE TUNER MODE A TUNER MODE B INSTALL AUTO PROGRAM LANGUAGE CHANNEL EDIT TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron
AR T
INSTALL TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron NAME
PERSONAL
If you want to create your own personal name for the channel or edit a name you chose previously, press the CURSOR RIGHT button to choose a PERSONAL option. Then press the CURSOR UP or DOWN button to select the first character of the name. You can input up to four more characters in creating the name. Press the MENU button after you finish.
INSTALL TUNER MODE AUTO PROGRAM CHANNEL EDIT AutoChron NAME
S SU UR RFF
INC
R. S
R.
PIP A/C
H
U UP P
PIP
CH D DN N
3 2
Press the i+ button to clear the menu from the screen.
WXWXY-
CH
UR
PERSONAL
If you want to choose from among the preset list of name options, press the CURSOR UP or DOWN button to highlight the choice you would like to select for the name. Then press the CURSOR RIGHT button.
4
7
WXYZ-
5
WXYZ3
6
SMART HELP The five characters that the channel NAME feature allows you to input can be letters, a dash character, or the numbers 0 through 9. 4
Up to 5 characters
