Preview only show first 10 pages with watermark. For full document please download

Cables According To International Approvals

   EMBED

Share

Transcript

Photo: HELUKABEL® Cables according to International Approvals N1 Cables according to International Approvals The installation of cables and wires according to overseas standards is getting more and more important for the machine and plant industries. HELUKABEL® knows this problem from his customers and has for a long time delivered single core and multicore cables according to the following standards. Due to our extensive stock capacity, we are in a position to cover your requirements quickly and correctly. Please enquire to our sales department. UL AWM MTW CEI CSA SEV USASI CNOMO GOST CCC BS Underwriters Laboratories Inc. Appliance Wiring Material Machine Tool Wire Comitato Elettrotecnico Italiano Canadian Standard Association Schweizerischer Elektrotechnischer Verein USA Standard Institute Comité De Normalisation Des Moyens De Production GOST-R Certification China Compulsory Certification British Standard N2 N Contents Description Page UL/CSA Control Cables JZ-602,two approvals control cable, 90°C, 600V, oil resistant, meter marking....................................................................................... JZ-603,Multi approvals control cable, oil resistant, meter marking............................................................................................... JZ-600 UL/CSA,flexible, number coded, 0,6/1kV, meter marking............................................................................................................. H05VV-F/SJT,300V, according to DINVDE0281 and UL62....................................................................................................... H05VV-F/SJT,300V, according to DINVDE0281 and UL62....................................................................................................... H05VV-F/UL,500 V, according to DIN VDE 0281 and UL-Style20195...................................................................................................... FROR CEI 20-22 II............................................................................................................................................................................ C.N.O.M.O,Type N05VV5-F according to NFC 32-207.................................................................................................................................. JZ-602-CY,EMC-preferred type, 90°C 600V, screened two approvals control cable, oil resistant, meter marking........................................... JZ-603-CY,Multi approvals control cable, Cu-screened, EMC-preferred, oil resistant, meter marking..................................................... JZ-600-Y-CY UL/CSA,flexible, number coded, 0,6/1kV, EMC-preferred type, meter marking......................................................................... JZ 604 TC TRAY CABLE, PVC power cable, exposed run, 90°C, 600V, meter marking.............................................................................. TRAYCONTROL 500,flexible, oil-resistant, open installation TC-ER, PLTC-ER, ITC-ER, NFPA 79 Edition 2007.......................................................... TRAYCONTROL 530,flexible TC-ER control cable with coloured cores....................................................................................................... TRAYCONTROL 600,flexible, oil-resistant, open installation (TC-ER), NFPA 79 Edition 2007............................................................................. TRAYCONTROL 670 HDP / 670-C HDP,flexible, oil-resistant, open installation (TC-ER), NFPA 79 Edition 2007................................................ JZ 604-FCY TC TRAY CABLE,PVC power cable, exposed run, screened, NFPA 79 Edition 2007, 90°C, 600V, EMC-preferred type, meter marking......... JZ 604-YCY TC TRAY CABLE,PVC power cable, exposed run, screened, NFPA 79 Edition 2007, 90°C, 600V, EMC-preferred type, meter marking..... TRAYCONTROL 500-C,flexible, oil-resistant, screened, EMC-preferred type, open installation TC-ER, PLTC-ER, ITC-ER, NFPA 79 Edition 2007............... TRAYCONTROL 600-C,flexible, oil-resistant, screened, EMC-preferred type, open installation (TC-ER), NFPA 79 Edition 2007................................... TRAYCONTROL 300,flexible, oil-resistant, NFPA 79 Edition 2007............................................................................................................. TRAYCONTROL 300-C,flexible, oil-resistant, screened, EMC-preferred type, NFPA 79 Edition 2007.................................................................. TRAYCONTROL 300 TP,stranded pair, flexible, oil-resistant, NFPA 79 Edition 2007..................................................................................... TRAYCONTROL 300-C TP,stranded pair, flexible, screened, oil-resistant, EMC-preferred type, NFPA 79 Edition 2007........................................... JZ-602-PUR,80°C, 600V, two approvals control cable, meter marking................................................................................................... JZ-602-PUR DC/AC,80°C, 600V, two approvals control cable, meter marking........................................................................................ JZ-600 PUR,tear and coolant resistant, 0,6/1kV, meter marking.............................................................................................................. JZ-602-C-PUR,screened two approvals control cable, 80°C, 600V, EMC-preferred type, meter marking......................................................... JZ-600-YC-PUR,tear and coolant resistant, 0,6/1kV, Cu-screened, EMC-preferred type, meter marking............................................................. MEGAFLEX 500,halogen-free, flame retardant, oil-resistant, UV-resistant, flexible, meter marking............................................................. MEGAFLEX 500-C,halogen-free, flame retardant, oil-resistant, UV-resistant, flexible, screened, EMC-preferred types, meter marking................. MEGAFLEX 600,halogen-free, flame retardant, oil-reistant, UV-resistant, flexible, meter marking................................................................... MEGAFLEX 600-C,halogen-free, flame retardant, oil-resistant, UV-resistant, flexible, meter marking............................................................... MULTIFLEX 600,highly flexible, oil-resistant, open installation TC-ER, PLTC-ER, NFPA 79 Edition 2007............................................................ MULTIFLEX 600-C,highly-flexible, oil-resistant, screened, EMC-preferred type, control cable for open installation TC-ER, PLTC-ER, NFPA 79 Edition 2007................................................................................................................................................................... UL/CSA Data Cables Command Cable UL (LiYY),Style2464/300V,(80°C)......................................................................................................................... Command Cable UL (LiYY),600V, Style2516/600V,(105°C)................................................................................................................ Command Cable UL (LiYY-TP),Style2464/300V, 80°C...................................................................................................................... Command Cable UL (LiYCY),Style 2464, 300V, 80°C, EMC-preferred type............................................................................................... Command Cable UL (LiYCY),Style2516/600V,105°C, EMC-preferred type............................................................................................ Command Cable UL (LiYCY-TP),Style 2464/300 V, 80°C, EMC-preferred type......................................................................................... N 65 N 66 N 67 N 69 N 71 N 72 UL/CSA Heat resistant Cables SiHF UL/CSA,halogen-free, 150°C/ 600 V, two-approvals silicon multicore cable.......................................................................................... SiHF-C-Si UL/CSA,halogen-free, 150°C/ 600 V, two-approvals silicon multicore cable, Cu-screened, EMC-preferred type........................................ N 75 N 77 ® ® ® ® N3 N 7 N 9 N 10 N 12 N 13 N 14 N 15 N 16 N 17 N 19 N 20 N 25 N 27 N 29 N 30 N 32 N 33 N 34 N 35 N 37 N 38 N 40 N 42 N 44 N 46 N 48 N 49 N 51 N 52 N 54 N 56 N 58 N 60 N 62 N 63 Contents Description Page UL/CSA Rubber Cables Rubber / Neoprene Control Cable,TypenSJOundSO.................................................................................................................. N 79 N 80 H07RN-F/SOOW,rubber-sheathed cable, harmonizised type............................................................................................................ UL/CSA Cables for Drag Chains MULTISPEED 500-PVC UL/CSA,high flexible, safety against high bending in drag chain systems, oil-resistant, low torsion, meter marking........ JZ-602 RC*,cable for drag chains, 90°C, 600V, two approvals control cable, meter marking................................................................... MULTISPEED 500-C-PVC UL/CSA,oil resistant, high flexible, safety against high bending in drag chain systems, low torsion, screened, EMC-preferred type, meter marking................................................................................................................................................. JZ-602 RC*-CY,special cable for drag chains, 90°C, 600V, two approvals control cable, EMC-preferred type, meter marking.......................... JZ-602 RC*-PUR,special cable for drag chains, 80°C, 600V, two approvals control cable, meter marking........................................................ MULTIFLEX 512 -PUR UL/CSA,special cable for drag chains, 80°C, 600V, two approvals control cable, halogen-free..................................... MULTISPEED 500-PUR UL/CSA,safety against high bending in drag chain systems, low torsion, halogen-free, meter marking...................... JZ-602 RC*-C-PUR,special cable for drag chains, 80°C, 600V, two approvals control cable, EMC-preferred type, meter marking.......................... MULTIFLEX 512 -C-PUR UL/CSA,special cable for drag chains, 80°C, 600V, two approvals control cable, EMC-preferred type, halogen-free, meter marking.......................................................................................................................................................................... MULTISPEED 500-C-PUR UL/CSA,safety against high bending in drag chain systems, low torsion, halogen-free, EMC-preferred type, meter marking ......................................................................................................................................................................... MULTISPEED 500-TPE UL/CSA,high flexible, safety against high bending in drag chain systems, low torsion, halogen-free, meter marking... MULTISPEED 500-C-TPE UL/CSA,safety against high bending in drag chain systems, low torsion, halogen-free, EMC-preferred type, meter marking...................................................................................................................................................................... SUPERTRONIC-310-PVC,special cable for drag chains, meter marking.............................................................................................. SUPERTRONIC-310-C-PVC,special cable for drag chains, EMC-preferred type, meter marking................................................................ SUPERTRONIC-330 PURö,cable for drag chains, halogen-free, meter marking.................................................................................... SUPERTRONIC-330 C-PURö,cable for drag chains, halogen-free, EMC-preferred type, meter marking...................................................... SUPER-PAAR-TRONIC 340-C-PUR,cable for drag chains, halogen-free, EMC-preferred type, meter marking............................................ MULTISPEED -TRONIC-PUR,safety against high bending in drag chain systems, halogen-free, meter marking............................................ MULTISPEED -TRONIC-C-PUR,safety against high bending in drag chain systems, high flexible, halogen-free, screened, EMC-preferred type, meter marking........................................................................................................................................................................... N 82 N 83 ® ® ® ® ® ® ® ® ® ® UL/CSA Single Conductors UL-Style 1007, CSA TR 64,PVC single cores, 80°C, 300V..................................................................................................................... UL-Style 1569, CSA TR 64,PVC single cores, 105°C, 300V................................................................................................................... UL-Style 1015,PVC single core, 600V.......................................................................................................................................... THREENORM,PVC single core, UL-Style 1013 and CSA 600V................................................................................................................ FIVENORM,HAR-UL-CSA-AWM-MTW, PVC single core, UL-Style 10269/UL-Standard 1063, 600V, 105°C........................................................ THHN/THWN,90°C, 600V, UL listed, PVC + nylon single core........................................................................................................................ PVC single cores,According to CEI-20-22 II........................................................................................................................................... HELUTHERM 145,300V, flexible single core, cross-linked, halogen-free................................................................................................... HELUTHERM 145,600V, flexible single core, cross-linked, halogen-free................................................................................................... UL-Style 3135,silicone single cores cable, 600V / 200°C, halogen-free............................................................................................................ Single 600-J/-O,special single core cable, 0,6/1kV, meter marking..................................................................................................... Single 600-CY -J/-O,special single core cable, Cu-screened, EMC-preferred type, meter marking.............................................................. Single 602-RC* -J/O,special single core cable for drag chains, 90°C, 600V, meter marking.................................................................. Single 602-RC* -CY -J/O,special single core cable for drag chains, 90°C, 600V, EMC-preferred type, meter marking............................ MULTISPEED 600-PUR -J/-O,special single cores for drag chains, halogen-free, meter marking............................................................ MULTISPEED 600-C-PUR -J/-O,special cable for drag chains, screened, halogen-free, EMC-preferred type, meter marking.......................... ® ® ® ®  N 84 N 85 N 86 N 87 N 89 N 91 N 92 N 94 N 96 N 98 N 100 N 101 N 102 N 103 N 104 N 105 N 106 N 108 N 109 N 110 N 111 N 113 N 115 N 116 N 117 N 118 N 119 N 120 N 121 N 122 N 123 N 124 N 125 N4 N Contents Description UL/CSA Servo, Feedback & Motor Cables TOPSERV 108 PVC,Motor cable without pair according to Siemens Standard 6FX5008 with PVC-outer sheath for fixed or not constantly movements 0,6/1kV................................................................................................................................................................ TOPSERV 112 PVC,Servo cable with 1 signal pair according to Siemens Standard 6FX5008 and Lenze Standard with PVC-sheath for fixed or not constantly movements 0,6/1kV................................................................................................................................................. TOPSERV 119 PVC,Servo cable with 2 signal pairs analogue Indramat Standard with PVC-sheath for fixed or not constantly movements 0,6/1kV.... TOPGEBER 511 PVC,Feedback cables according to Siemens-, Lenze- or Indramat Standard with PVC-sheath for fixed or not constantly movements. TOPSERV 109 PUR,PUR, high flexible motor cable for drag chain without pairs according to Siemens Standard 6FX8008-plus 0,6/1kV....... TOPSERV 113 PUR,PUR, high flexible servo cable for drag chain with 1 signal pair according to Siemens Standard 6FX8008-plus and Lenze 0,6/1kV................................................................................................................................................................... TOPSERV 121 PUR,PUR, high flexible servo cable for drag chain with 2 Signal pairs according to Indramat-Standard INK....................... TOPGEBER 512 PUR,PUR, high flexible Feedback cable for drag chain according to Siemens, Indramat, Lenze and other Standards......... TOPFLEX 600 VFD,EMC-preferred type, flexible motor power supply cable, oil-resistant, NFPA 79 Edition 2007................................................. TOPFLEX 650 VFD,EMC-preferred type, flexible motor power supply cable with control cores, oil-resistant, NFPA 79 Edition 2007.......................... TOPSERV 600 VFD,EMC-preferred type, flexible motor power supply cable, oil-resistant, NFPA 79 Edition 2007....................................... TOPSERV 650 VFD,EMC-preferred type, flexible motor power supply cable with control cores, oil-resistant, NFPA 79 Edition 2007.................... TOPFLEX -EMV-UV-2YSLCYK-J UL/CSA,Motor supply cable 0,6/1kV, for power supply connections to frequency converters, double screened, meter marking................................................................................................................................................................................. TOPFLEX -EMV-UV 2YSLCYK-J UL/CSA,Motor supply cable 0,6/1kV, for power supply connections to frequency converters, double screened, meter marking................................................................................................................................................................................. TOPFLEX -EMV-UV 2YSLC11Y-J UL/CSA,Motor supply cable 0,6/1kV, for power supply connections to frequency converters, double screened, meter marking................................................................................................................................................................................. TOPFLEX MOTOR EMV 1/1,triple-screened, low capacitance, 80°C 600V high flexible motor supply cable, meter markingrt........................... TOPFLEX -MOTOR-EMV 3/3,triple-screened, low capacitance, 80°C, 600V, PUR flexible motor supply cable, meter marking........................... TOPFLEX -MOTOR-EMV 103,low capacitance power supply cable 0,6/1kV, increased ampacity, meter marking........................................... VERTEILERFLEX two-approvals,sensor actuator and distributor cables PVC, PUR, PVC/PUR....................................................................... ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® ® Cables to British Standard HELUKABEL BS 5308 Part 1,Instruments cable, core insulation PE or XLPE................................................................................................. HELUKABEL BS 5308 Part 2,Instruments cable, core insulation PVC.......................................................................................................... HELUKABEL BS 5467,High voltage cable 0,6/1kV, armoured, sheath PVC...................................................................................................... HELUKABEL BS 6724,High voltage cable 0,6/1kV, armoured, halogen-free.................................................................................................... N5 Page N 127 N 128 N 129 N 130 N 131 N 132 N 134 N 135 N 137 N 138 N 139 N 140 N 141 N 143 N 145 N 147 N 148 N 150 N 151 N 154 N 155 N 156 N 157 JZ-602 JZ-603 JZ-600 UL/CSA H05VV-F/SJT H05VV-F/UL FROR CEI 20-22 II C.N.O.M.O JZ-602-CY JZ-603-CY JZ-600-Y-CY UL/CSA JZ 604 TC TRAY CABLE TRAYCONTROL 500 TRAYCONTROL 530 TRAYCONTROL 600 TRAYCONTROL 670 JZ 604-FCY TC TRAY CABLE JZ 604-YCY TC TRAY CABLE TRAYCONTROL 500-C TRAYCONTROL 600-C TRAYCONTROL 300 TRAYCONTROL 300-C TRAYCONTROL 300 TP TRAYCONTROL 300-C TP JZ-602-PUR JZ-602-PUR DC/AC JZ-600 PUR JZ-602-C-PUR JZ-600-YC-PUR MEGAFLEX® 500 MEGAFLEX® 500-C MEGAFLEX® 600 MEGAFLEX® 600-C MULTIFLEX 600 MULTIFLEX 600-C Photo: HELUKABEL® UL/CSA Control Cables N6 N JZ-602 two approvals control cable, 90°C, 600V, oil resistant, meter marking   Technical data Cable structure Properties Ⴠ Control cable of special-PVC to UL CSA AWM I/II A/B Style2587 (jacket insulation) and CSA Ⴠ Temperature range flexing -5 °C to +90 °C fixed installation -40 °C to +90 °C Ⴠ Nominal voltage according to UL + CSA 600 V Ⴠ Test voltage 3000 V Ⴠ Breakdown voltage min. 6000 V Ⴠ Insulation resistance min 20 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire stranded to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation TI3, to DINVDE0281 part1 and class43 to UL-Std.1581 Ⴠ Black conductors with consecutive numbering in white Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Special PVC outer sheath YM5, to DINVDE0207 part5 and class43 to UL-Std.1581 Ⴠ Colour grey (RAL 7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Resistant to mineral oils, synthetic oils and water based coolants Ⴠ The outer sheath is approved with an improved oil-resistance-test Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ Please note the cleanroom qualification when ordering. Ⴠ screened analogue type: JZ-602-CY, see page N 17  Application UL-approved and CSA certified flexible control cable rated at 600 V. Used in machine tools, control systems, connection between control panels and machines, assembly lines and other industrial equipment. Suitable for installation in dry, moist or wet environment and moderate flexing applications. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 83090 83091 83092 83093 83094 83100 83101 83095 83096 83097 83098 83099 83080 83081 83565 83082 83083 83084 83102 83103 83085 83086 83087 83088 83089 83070 83071 83072 83073 83074  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 8G0,5 9G0,5 12G0,5 18G0,5 25G0,5 34G0,5 41G0,5 2x1 3G1 3x1 4G1 5G1 7G1 8G1 9G1 12G1 18G1 25G1 34G1 41G1 2x1,5 3G1,5 4G1,5 5G1,5 7G1,5 AWG-No. Outer Ø approx. mm 20 5,8 20 6,2 20 6,6 20 7,2 20 7,8 20 8,4 20 10,3 20 10,8 20 12,8 20 15,4 20 17,6 20 19,7 18 6,2 18 6,6 18 6,6 18 7,2 18 7,8 18 8,4 18 9,4 18 11,0 18 11,7 18 14,0 18 17,0 18 19,2 18 21,0 16 6,8 16 7,4 16 8,0 16 8,6 16 9,7 Cop. weight kg/km 9,6 14,0 19,0 24,0 34,0 38,4 43,2 58,0 86,0 120,0 163,0 197,0 19,2 27,0 27,0 38,4 48,0 67,0 76,8 86,4 115,2 173,0 240,0 326,0 394,0 28,8 44,0 58,0 72,0 101,0 Weight approx. kg/km 49,0 58,0 69,0 84,0 123,0 140,0 177,0 192,0 256,0 358,0 487,0 580,0 53,0 61,0 61,0 74,0 90,0 130,0 144,0 180,0 198,0 274,0 384,0 494,0 508,0 73,0 94,0 117,0 140,0 186,0  Part no. 83104 83075 83076 83077 83078 83079 83060 83061 83062 83063 83064 83065 83066 83067 83068 83069 83051 83052 83053 83054 83041 83042 83043 83044 83031 83032 83033 83034 No.cores x cross-sec. mm² 9G1,5 12G1,5 18G1,5 25G1,5 34G1,5 41G1,5 2x2,5 3G2,5 4G2,5 5G2,5 7G2,5 9G2,5 12G2,5 18G2,5 19G2,5 25G2,5 3G4 4G4 5G4 7G4 3G6 4G6 5G6 7G6 3G10 4G10 5G10 7G10 AWG-No. Outer Ø approx. mm 16 12,7 16 13,3 16 15,7 16 18,8 16 22,0 16 23,6 14 8,1 14 8,6 14 10,0 14 10,8 14 12,0 14 15,5 14 16,6 14 19,5 14 19,5 14 23,8 12 11,1 12 12,4 12 13,7 12 15,0 10 12,8 10 14,1 10 15,7 10 17,7 8 16,8 8 18,3 8 20,1 8 22,4 Cop. weight kg/km 129,7 173,0 260,0 360,0 490,0 590,0 48,0 72,0 96,0 120,0 168,0 216,0 288,0 432,0 456,0 600,0 115,0 154,0 192,0 269,0 173,0 231,0 288,0 403,0 288,0 384,0 480,0 672,0 Weight approx. kg/km 244,0 319,0 451,0 625,0 840,0 1032,0 115,0 143,0 185,0 221,0 293,0 429,0 563,0 854,0 914,0 1188,0 232,0 298,0 358,0 460,0 360,0 402,0 484,0 630,0 535,0 653,0 786,0 1100,0  Continuation Ⴇ N7 JZ-602 two approvals control cable, 90°C, 600V, oil resistant, meter marking  Part no. 83020 83021 83022 83023 83024 83011 83012 83013 83014 83001 83002 83003 83004 83005 83006  No.cores x cross-sec. mm² 2x16 3G16 4G16 5G16 7G16 3G25 4G25 5G25 7G25 3G35 4G35 5G35 3G50 4G50 5G50 AWG-No. Outer Ø approx. mm 6 20,0 6 21,3 6 23,8 6 26,6 6 29,4 4 24,7 4 27,8 4 30,5 4 35,5 2 29,4 2 32,6 2 36,3 1 31,2 1 36,8 1 38,7 Cop. weight kg/km 307,0 461,0 615,0 768,0 1075,0 720,0 960,0 1200,0 1680,0 1008,0 1344,0 1680,0 1440,0 1920,0 2400,0 Weight approx. kg/km 640,0 810,0 1045,0 1260,0 1760,0 1180,0 1507,0 1858,0 2830,0 1590,0 2123,0 2612,0 2652,0 3058,0 4093,0  Part no. 83007 83008 83009 83010 83015 83016 83017 83018 83019 No.cores x cross-sec. mm² 3G70 4G70 5G70 3G95 4G95 5G95 3G120 4G120 5G120 AWG-No. Outer Ø approx. mm 2/0 39,2 2/0 42,6 2/0 48,4 3/0 42,1 3/0 47,5 3/0 51,2 4/0 47,8 4/0 54,6 4/0 59,0 Cop. weight kg/km 2016,0 2688,0 3360,0 2736,0 3648,0 4560,0 3456,0 4608,0 5760,0 Weight approx. kg/km 3307,0 4254,0 5661,0 4867,0 5762,0 7208,0 5580,0 7280,0 8692,0  Dimensions and specifications may be changed without prior notice. (RN01) N Carrying out a flame test according to the American standard UL 1581 at our Windsbach factory. N8 JZ-603 Multi approvals control cable, oil resistant, meter marking   Technical data Cable structure Properties Ⴠ Special PVC control cable with oil resistant outer sheath to DINVDE0281 part13, HD21.13S1 and to UL-Style2587 Ⴠ Temperature range flexing -5 °C to +70 °C (HAR) -5 °C to +90 °C (UL+CSA) fixed installation -40 °C to +70 °C (HAR) -40 °C to +90 °C (UL+CSA) Ⴠ Nominal voltage U0/U 300/500 V (HAR) U 600 V (UL+CSA) Ⴠ Test voltage 3000 V Ⴠ Breakdown voltage min. 6000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductors to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation TI1, to DINVDE0281 part1, HD21.1S2 and class43 to UL-Std.1581 Ⴠ Black cores with white continuous numbering according to DIN VDE 0293 Ⴠ Green-yellow earth core in the outer layer Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Special PVC outer sheath TM5 oil resistant, to DINVDE0281 part1, HD21.1S4 and class43 to UL-Std.1581 Ⴠ Colour grey (RAL 7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Oil resistant as per HD/EN60811-2-1, UL1581 part50.182 Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB), UL-VW1. Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers   Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ The follwing amendments in the cable designation result from the new DINVDE0281 part13 / harmonised in accordance with HD 21.13S1: NYSLYÖ-J (new: H05VV5-F) and NYSLYCYÖ-J (new: H05VVC4V5-K). SEV-approval is no longer applicable as a result of the harmonisation. Ⴠ screened analogue type: JZ-603-CY, see page N 19 Application UL-CSA-HAR approved cables offer any company exporting anywhere in the world, primarily designed for exporters, used in machine tools, control systems, assembly lines and other industrial equipment. These cables are suitable for flexible use for medium mechanical stresses with free movements in dry, moist and wet rooms but not for open air. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 83704 83650 83651 83652 83653 83654 83655 83656 83657 83658 83659 83660 83705 83661 83662 83663 83664 83665 83666 83667 83668 83669 83670 83671 83706 83672 83673 83674 83675 83676 83677 83678  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 12G0,5 18G0,5 25G0,5 34G0,5 41G0,5 50G0,5 61G0,5 2x0,75 3G0,75 4G0,75 5G0,75 7G0,75 12G0,75 18G0,75 25G0,75 34G0,75 41G0,75 50G0,75 61G0,75 2x1 3G1 4G1 5G1 7G1 12G1 18G1 25G1 AWG-No. Outer Ø approx. mm 20 5,8 20 6,1 20 6,7 20 7,3 20 8,8 20 11,1 20 12,9 20 16,0 20 17,7 20 19,5 20 21,3 20 23,8 19 6,1 19 6,5 19 7,1 19 7,9 19 9,5 19 11,6 19 13,9 19 17,1 19 19,1 19 20,9 19 23,0 19 25,3 18 6,4 18 6,8 18 7,5 18 8,4 18 10,0 18 12,5 18 14,7 18 18,0 Cop. weight kg/km 9,6 14,0 19,0 24,0 34,0 58,0 86,0 120,0 163,0 197,0 240,0 293,0 14,4 22,0 29,0 36,0 50,0 86,0 130,0 180,0 245,0 296,0 360,0 439,0 19,2 29,0 39,0 48,0 67,0 115,0 173,0 240,0 Weight approx. kg/km 52,0 63,0 69,0 87,0 119,0 198,0 266,0 380,0 508,0 594,0 715,0 840,0 66,0 76,0 85,0 113,0 144,0 245,0 327,0 466,0 626,0 747,0 896,0 1070,0 70,0 88,0 99,0 132,0 170,0 285,0 405,0 570,0  Dimensions and specifications may be changed without prior notice. (RN01) N9  Part no. 83679 83680 83681 83682 83707 83683 83684 83685 83686 83687 83688 83689 83690 83691 83692 83693 83708 83694 83695 83696 83697 83698 83699 83700 83701 83702 83703 No.cores x cross-sec. mm² 34G1 41G1 50G1 61G1 2x1,5 3G1,5 4G1,5 5G1,5 7G1,5 12G1,5 18G1,5 25G1,5 34G1,5 41G1,5 50G1,5 61G1,5 2x2,5 3G2,5 4G2,5 5G2,5 7G2,5 12G2,5 18G2,5 25G2,5 34G2,5 50G2,5 61G2,5 AWG-No. Outer Ø approx. mm 18 20,3 18 22,4 18 24,3 18 26,8 16 7,4 16 8,0 16 8,7 16 9,8 16 11,9 16 14,5 16 17,4 16 21,3 16 24,1 16 26,2 16 28,8 16 31,5 14 9,1 14 9,9 14 11,0 14 12,0 14 14,6 14 18,1 14 22,1 14 26,5 14 29,9 14 35,2 14 38,4 Cop. weight kg/km 326,0 394,0 480,0 586,0 28,8 43,0 58,0 72,0 101,0 173,0 259,0 360,0 490,0 591,0 720,0 878,0 48,0 72,0 96,0 120,0 168,0 288,0 432,0 600,0 816,0 1200,0 1464,0 Weight approx. kg/km 742,0 885,0 1071,0 1265,0 91,0 110,0 141,0 167,0 225,0 361,0 518,0 730,0 945,0 1135,0 1381,0 1640,0 125,0 169,0 209,0 256,0 340,0 579,0 851,0 1175,0 1529,0 2290,0 2724,0 JZ-600 UL/CSA flexible, number coded, 0,6/1kV, meter marking   Technical data Cable structure Properties Ⴠ Special PVC control cables Adapted to DINVDE0276 part627, DINVDE0281 part13, with insulation thickness for 1kV type and UL-Std.758 Style21179 Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage 1000 V Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Power rating as per DIN VDE 0298 Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductors, as per DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation TI2, to DINVDE0281 part1, class43 UL-Std.1581 Ⴠ Black cores with white figure imprints to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Separating foil Special PVC outer sheath TM2, to DINVDE0281 part1, class43 UL-Std.1581 Ⴠ Colour black (RAL9005) or grey (RAL7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Extensively oil resistant, oil-/ chemical Resistance - see table Technical Informations Ⴠ Resistant to ultra violet rays (building with black jacket) Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) VW1, FT1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ screened analogue type: JZ-600-Y-CY UL/CSA, see page N 20  Application Wiring cable for measuring and controlling purposes in tool machinery, conveyor belts and production lines, for plant installations, air conditioning and in steel production plants and rolling mills. Suitable for installation for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms as well as outside (fixed installation, building with black jacket). Is not suitable to be used as direct burrial- or as underwater cable. The cores have been numbered in such a way that the numbers are easily identifiable, even if the cable has only been stripped back a few cm. The core numbers have been underlined to avoid confusion. The earth core is located in the outer layer. The black, special PVC outer sheath is resistant to the ultra violet radiation. Mainly used in South-European, Eastern and Arabian countries. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x Jacket cross-sec. colour mm² black 11815 2x0,5 11816 3G0,5 11817 4G0,5 11818 5G0,5 11819 7G0,5 11820 12G0,5 11821 18G0,5 11822 25G0,5 11823 2x0,75 11824 3G0,75 11825 4G0,75 11826 5G0,75 11827 7G0,75 11828 12G0,75 11829 18G0,75 11830 25G0,75 11831 2x1 11832 3G1 11833 4G1 11834 5G1 11835 7G1 11836 12G1 11837 18G1 11838 25G1 11839 2x1,5 11840 3G1,5 11841 4G1,5 11842 5G1,5 11843 7G1,5 11844 12G1,5 11845 18G1,5 11846 25G1,5  AWG-No. 20 20 20 20 20 20 20 20 19 19 19 19 19 19 19 19 18 18 18 18 18 18 18 18 16 16 16 16 16 16 16 16 Outer Ø Cop. approx. mm weight kg/km 6,4 6,8 7,6 8,2 9,8 12,2 14,4 17,2 6,8 7,2 8,0 8,8 10,7 13,1 15,6 18,9 7,4 8,0 8,8 9,8 11,7 14,5 17,3 21,1 8,4 9,1 9,9 11,0 13,3 16,6 19,7 23,9 9,6 14,4 19,0 24,0 33,6 58,0 86,0 120,0 14,4 21,6 29,0 36,0 50,0 86,0 130,0 180,0 19,2 29,2 38,4 48,0 67,0 115,0 173,0 240,0 29,0 43,0 58,0 72,0 101,0 173,0 259,0 360,0 Weight approx. kg/km 56,0 68,0 100,0 117,0 138,0 200,0 276,0 335,0 66,0 74,0 126,0 140,0 190,0 257,0 362,0 486,0 80,0 96,0 100,0 130,0 170,0 290,0 405,0 570,0 95,0 112,0 139,0 170,0 225,0 370,0 520,0 730,0  Part no. No.cores x Jacket cross-sec. colour mm² grey 11880 2x0,5 11881 3G0,5 11882 4G0,5 11883 5G0,5 11884 7G0,5 11885 12G0,5 11886 18G0,5 11887 25G0,5 11888 2x0,75 11889 3G0,75 11890 4G0,75 11891 5G0,75 11892 7G0,75 11893 12G0,75 11894 18G0,75 11895 25G0,75 11896 2x1 11897 3G1 11898 4G1 11899 5G1 11900 7G1 11901 12G1 11902 18G1 11903 25G1 11904 2x1,5 11905 3G1,5 11906 4G1,5 11907 5G1,5 11908 7G1,5 11909 12G1,5 11910 18G1,5 11911 25G1,5 AWG-No. 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 17 17 17 17 17 17 17 17 16 16 16 16 16 16 16 16 Outer Ø Cop. approx. mm weight kg/km 6,4 6,8 7,6 8,2 9,8 12,2 14,4 17,2 6,8 7,2 8,0 8,8 10,7 13,1 15,6 18,9 7,4 8,0 8,8 9,8 11,7 14,5 17,3 21,1 8,4 9,1 9,9 11,0 13,3 16,6 19,7 23,9 9,6 14,4 19,0 24,0 33,6 58,0 86,0 120,0 14,4 21,6 29,0 36,0 50,0 86,0 130,0 180,0 19,2 29,2 38,4 48,0 67,0 115,0 173,0 240,0 29,0 43,0 58,0 72,0 101,0 173,0 259,0 360,0 Weight approx. kg/km 56,0 68,0 100,0 117,0 138,0 200,0 276,0 335,0 66,0 74,0 126,0 140,0 190,0 257,0 362,0 486,0 80,0 96,0 100,0 130,0 170,0 290,0 405,0 570,0 95,0 112,0 139,0 170,0 225,0 370,0 520,0 730,0  Continuation Ⴇ N 10 N JZ-600 UL/CSA flexible, number coded, 0,6/1kV, meter marking  Part no. No.cores x Jacket cross-sec. colour mm² black 11847 2x2,5 11848 3G2,5 11849 4G2,5 11850 5G2,5 11851 7G2,5 11852 12G2,5 11853 18G2,5 11854 25G2,5 11855 2x4 11856 3G4 11857 4G4 11858 5G4 11859 7G4 11860 12G4 11861 3G6 11862 4G6 11863 5G6 11864 7G6 11865 3G10 11866 4G10 11867 5G10 11868 7G10 11869 3G16 11870 4G16 11871 5G16 11872 7G16 11873 3G25 11874 4G25 11875 5G25 11876 7G25  AWG-No. 14 14 14 14 14 14 14 14 12 12 12 12 12 12 10 10 10 10 8 8 8 8 6 6 6 6 4 4 4 4 Outer Ø Cop. approx. mm weight kg/km 9,4 9,9 11,1 12,4 15,0 18,4 22,0 26,9 11,4 12,3 13,8 15,3 16,8 22,9 14,1 15,6 17,3 19,3 16,5 18,1 20,5 22,5 19,6 21,7 24,2 25,7 24,0 26,9 29,4 32,8 48,0 72,0 96,0 120,0 168,0 288,0 432,0 600,0 77,0 115,0 154,0 192,0 269,0 461,0 173,0 230,0 288,0 403,0 288,0 384,0 480,0 672,0 461,0 614,0 768,0 1075,0 720,0 960,0 1200,0 1680,0 Weight approx. kg/km 160,0 175,0 203,0 251,0 330,0 553,0 795,0 1110,0 180,0 230,0 310,0 410,0 540,0 860,0 370,0 430,0 650,0 860,0 660,0 790,0 960,0 1300,0 760,0 1100,0 1600,0 1890,0 1450,0 1600,0 2050,0 2900,0  Dimensions and specifications may be changed without prior notice. (RN01) N 11  Part no. No.cores x Jacket cross-sec. colour mm² grey 11912 2x2,5 11913 3G2,5 11914 4G2,5 11915 5G2,5 11916 7G2,5 11917 12G2,5 11918 18G2,5 11919 25G2,5 11920 2x4 11921 3G4 11922 4G4 11923 5G4 11924 7G4 11925 12G4 11926 3G6 11927 4G6 11928 5G6 11929 7G6 11930 3G10 11931 4G10 11932 5G10 11933 7G10 11934 3G16 11935 4G16 11936 5G16 11937 7G16 11938 3G25 11939 4G25 11940 5G25 11941 7G25 AWG-No. 14 14 14 14 14 14 14 14 12 12 12 12 12 12 10 10 10 10 8 8 8 8 6 6 6 6 4 4 4 4 Outer Ø Cop. approx. mm weight kg/km 9,4 9,9 11,1 12,4 15,0 18,4 22,0 26,9 11,4 12,3 13,8 15,3 16,8 22,9 14,1 15,6 17,3 19,3 16,5 18,4 20,5 22,5 19,6 21,7 24,2 25,7 24,0 26,9 29,3 32,6 48,0 72,0 96,0 120,0 168,0 288,0 432,0 600,0 77,0 115,0 154,0 192,0 269,0 461,0 173,0 230,0 288,0 403,0 288,0 384,0 480,0 672,0 461,0 614,0 768,0 1075,0 720,0 960,0 1200,0 1680,0 Weight approx. kg/km 160,0 175,0 203,0 251,0 330,0 553,0 795,0 1110,0 180,0 230,0 310,0 410,0 540,0 860,0 370,0 430,0 650,0 860,0 660,0 790,0 960,0 1300,0 760,0 1100,0 1600,0 1890,0 1450,0 1600,0 2050,0 2900,0 H05VV-F/SJT 300V, according to DINVDE0281 and UL62   Technical data Cable structure Properties Ⴠ PVC control cable to DINVDE0281 part5 and part2, IEC60227-5, HD21.5S3 and UL-Std.62 and CSA22.2 No.49 Ⴠ Temperature range flexing -5 °C to +70 °C fixed installation -40 °C to +70 °C Ⴠ Nominal voltage DIN VDE 0281 = U0/U 300/500 V UL 62 = U 300 V CSA = U 300 V Ⴠ Test voltage 2500 V, 5 min. Ⴠ Breakdown voltage min. 5000 V Ⴠ Spark-Test 6000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius approx. 7,5x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire stranded conductor to DINVDE0295 cl.5, BS6360 cl.5, IEC60228 cl.5, HD383 and UL-Std.62 Ⴠ PVC insulation TI2 to DINVDE0281 part1 and class43 to UL-Std.62 (Table 50.182, UL-Std.1581) according to CSA-Std. C22.2 No49 TypeSJT Ⴠ Core identification according to colour code DINVDE0293-308, one coloured Ⴠ Green-yellow earth core, 3 cores and above Ⴠ Core stranded with optimal lay-length Ⴠ PVC outer jacket TM2 to DINVDE0281 part1 and class43 to UL-Std.62 (Table50.182, UL-Std.1581) according to CSA-Std. C22.2 No49 TypeSJT Ⴠ Jacket colour black, white or grey Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core.  Application These flexible PVC control cables, VDE-HAR-UL-CSA approved, are designed for the export and also for the export-orientated-equipment. These cables are especially suited to use for the appliance with medium mechanical stresses with free movement without tensile stress in households, kitchens and offices, also for household appliances in damp and wet areas, e.g. refrigerators, washing machines, spin-driver etc., as far as this cable is admitted to the relevant specifications of the equipment. These cables are suited to be used for cooking and heating apparatus under the condition that cable does not come in direct contact with hot parts of the apparatus and no other influences or heat. The cables are suitable for fixed installation in furnitures, partition walls, decoration covering and in hollow spaces of prefabricated building parts. They are not suitable for use in open air, in industries (also permitted to tailor workshops and of that kind) and in agriculture plants and for connecting commercial electrical tools. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 28034 2x1 28066 2x1 28050 2x1 28035 3G1 28067 3G1 28051 3G1 28036 4G1 28068 4G1 28052 4G1 28037 5G1 28069 5G1 28053 5G1 28038 2x1,5 28070 2x1,5 28054 2x1,5 28039 3G1,5 28071 3G1,5 28055 3G1,5 28040 4G1,5 28072 4G1,5 28056 4G1,5 28041 5G1,5 28073 5G1,5 28057 5G1,5  Jacket colour black grey white black grey white black grey white black grey white black grey white black grey white black grey white black grey white Outer Ø approx. mm 7,3 7,3 7,3 7,8 7,8 7,8 8,6 8,6 8,6 9,4 9,4 9,4 7,9 7,9 7,9 8,4 8,4 8,4 9,3 9,3 9,3 10,4 10,4 10,4 Cop. Weight AWG-No. weight approx. kg/km kg/km 19,2 56,0 17 19,2 56,0 17 19,2 56,0 17 28,8 73,0 17 28,8 73,0 17 28,8 73,0 17 38,4 86,0 17 38,4 86,0 17 38,4 86,0 17 48,0 105,0 17 48,0 105,0 17 48,0 105,0 17 28,8 82,0 16 28,8 82,0 16 28,8 82,0 16 44,0 96,0 16 44,0 96,0 16 44,0 96,0 16 58,0 117,0 16 58,0 117,0 16 58,0 117,0 16 72,0 144,0 16 72,0 144,0 16 72,0 144,0 16  Part no. No.cores x cross-sec. mm² 28042 2x2,5 28074 2x2,5 28058 2x2,5 28043 3G2,5 28075 3G2,5 28059 3G2,5 28044 4G2,5 28076 4G2,5 28060 4G2,5 28045 5G2,5 28077 5G2,5 28061 5G2,5 28046 2x4 28078 2x4 28062 2x4 28047 3G4 28079 3G4 28063 3G4 28048 4G4 28080 4G4 28064 4G4 28049 5G4 28081 5G4 28065 5G4 Jacket colour black grey white black grey white black grey white black grey white black grey white black grey white black grey white black grey white Outer Ø approx. mm 9,2 9,2 9,2 10,0 10,0 10,0 10,9 10,9 10,9 12,2 12,2 12,2 10,6 10,6 10,6 11,5 11,5 11,5 12,4 12,4 12,4 14,1 14,1 14,1 Cop. Weight AWG-No. weight approx. kg/km kg/km 48,0 118,0 14 48,0 118,0 14 48,0 118,0 14 72,0 152,0 14 72,0 152,0 14 72,0 152,0 14 96,0 192,0 14 96,0 192,0 14 96,0 192,0 14 120,0 243,0 14 120,0 243,0 14 120,0 243,0 14 76,8 195,0 12 76,8 195,0 12 76,8 195,0 12 115,0 235,0 12 115,0 235,0 12 115,0 235,0 12 154,0 300,0 12 154,0 300,0 12 154,0 300,0 12 192,0 361,0 12 192,0 361,0 12 192,0 361,0 12  Dimensions and specifications may be changed without prior notice. (RN01) N 12 N H05VV-F/SJT 300V, according to DINVDE0281 and UL62   Technical data Cable structure Properties Ⴠ PVC control cable to DINVDE0281 part5 and part2, IEC60227-5, HD21.5S3 and UL-Std.62 and CSA22.2 No.49 Ⴠ Temperature range flexing -5 °C to +70 °C fixed installation -40 °C to +70 °C Ⴠ Nominal voltage DIN VDE 0281 = U0/U 300/500 V UL 62 = U 300 V CSA = U 300 V Ⴠ Test voltage 2500 V, 5 min. Ⴠ Breakdown voltage min. 5000 V Ⴠ Spark-Test 6000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius approx. 7,5x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire stranded conductor to DINVDE0295 cl.5, BS6360 cl.5, IEC60228 cl.5, HD383 and UL-Std.62 Ⴠ PVC insulation TI2 to DINVDE0281 part1 and class43 to UL-Std.62 (Table 50.182, UL-Std.1581) according to CSA-Std. C22.2 No49 TypeSJT Ⴠ Core identification according to colour code DINVDE0293-308, one coloured Ⴠ Green-yellow earth core, 3 cores and above Ⴠ Core stranded with optimal lay-length Ⴠ PVC outer jacket TM2 to DINVDE0281 part1 and class43 to UL-Std.62 (Table50.182, UL-Std.1581) according to CSA-Std. C22.2 No49 TypeSJT Ⴠ Jacket colour by request Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core. Ⴠ Colour code: 0 = RAL 5015, blue 1 = RAL 6018, green 2 = RAL 8003, brown 3 = RAL 1021, yellow 4 = RAL 3000, red 5 = RAL 2003, orange 6 = RAL 4005, violet 7 = gold 8 = dusky gold Ⴠ Please add the individual part no. for order with the identification colour code. Further colours on request.  Application These flexible PVC control cables, VDE-HAR-UL-CSA approved, are designed for the export and also for the export-orientated-equipment. These cables are especially suited to use for the appliance with medium mechanical stresses with free movement without tensile stress in households, kitchens and offices, also for household appliances in damp and wet areas, e.g. refrigerators, washing machines, spin-driver etc., as far as this cable is admitted to the relevant specifications of the equipment. These cables are suited to be used for cooking and heating apparatus under the condition that cable does not come in direct contact with hot parts of the apparatus and no other influences or heat. The cables are suitable for fixed installation in furnitures, partition walls, decoration covering and in hollow spaces of prefabricated building parts. They are not suitable for use in open air, in industries (also permitted to tailor workshops and of that kind) and in agriculture plants and for connecting commercial electrical tools. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 3110_ 3111_ 3112_ 3113_ 3114_ 3115_ 3116_ 3117_  No.cores x cross-sec. mm² 2x1 3G1 4G1 5G1 2x1,5 3G1,5 4G1,5 5G1,5 Outer Ø Cop. approx. mm weight kg/km 7,3 19,2 7,8 28,8 8,6 38,4 9,4 48,0 7,9 28,8 8,4 44,0 9,3 58,0 10,4 72,0 Weight approx. kg/km 56,0 73,0 86,0 105,0 82,0 96,0 117,0 144,0 AWG-No.  Dimensions and specifications may be changed without prior notice. (RN01) N 13 17 17 17 17 16 16 16 16  Part no. 3118_ 3119_ 3120_ 3121_ 3122_ 3123_ 3124_ 3125_ No.cores x cross-sec. mm² 2x2,5 3G2,5 4G2,5 5G2,5 2x4 3G4 4G4 5G4 Outer Ø Cop. approx. mm weight kg/km 9,2 48,0 10,0 72,0 10,9 96,0 12,2 120,0 10,6 76,8 11,5 115,0 12,4 154,0 14,1 192,0 Weight approx. kg/km 118,0 152,0 192,0 243,0 195,0 235,0 300,0 361,0 AWG-No. 14 14 14 14 12 12 12 12 H05VV-F/UL 500 V, according to DIN VDE 0281 and UL-Style20195   Technical data Cable structure Properties Ⴠ PVC control cable to DINVDE0281 part5 and part2, IEC60227-5, HD21.5S3 and UL-Subj.758 AWM-Style 20195 Ⴠ Temperature range flexing -5 °C to +70 °C fixed installation -40 °C to +70 °C Ⴠ Nominal voltage DIN VDE 0281 = U0/U 300/500 V UL-Style 20195 = U0/U 300/500 V Ⴠ Test voltage 2500 V Ⴠ Breakdown voltage min. 5000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius approx. 7,5x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductors bunch stranded to DINVDE0295 cl.5, BS6360 cl.5, IEC60228 cl.5, HD383 and to UL-Std. 62 Ⴠ PVC core insulation TI2 to DINVDE0281 part1 Ⴠ Cores colour coded to DINVDE0293-308 Ⴠ Green-yellow earth core, 3 cores and above Ⴠ Core stranded in layers with optimal lay-length Ⴠ PVC outer jacket, colour by request Ⴠ PVC outer jacket TM2 to DINVDE0281 part1  Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core. Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ Colour code: 0 = RAL 9005, black 1 = RAL 9003, white 2 = RAL 5015, blue 3 = RAL 6018, green 4 = RAL 8003, brown 5 = RAL 1021, yellow 6 = RAL 3000, red 7 = RAL 2003, orange 8 = RAL 4005, violet 9 = RAL 7001/7032, grey Ⴠ Please add the individual part no. for order with the identification colour code. Further colours on request.  Application These flexible PVC control cables, VDE-HAR-AWM approved, are designed for the export and also for the export-orientated-equipment. These cables are especially suited to use for the appliance with medium mechanical stresses with free movement without tensile stress in households, kitchens and offices, also for household appliances in damp and wet areas, e.g. refrigerators, washing machines, spin-driver etc., as far as this cable is admitted to the relevant specifications of the equipment. These cables are suited to be used for cooking and heating apparatus under the condition that cable does not come in direct contact with hot parts of the apparatus and no other influences or heat. The cables are suitable for fixed installation in furnitures, partition walls, decoration covering and in hollow spaces of prefabricated building parts. They are not suitable for use in open air, in industries (also permitted to tailor workshops and of that kind) and in agriculture plants and for connecting commercial electrical tools. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 3269_ 3270_ 3271_ 3272_ 3273_ 3274_ 3275_ 3276_ 3277_ 3278_  No.cores x cross-sec. mm² 2x0,75 3G0,75 4G0,75 5G0,75 2x1 3G1 4G1 5G1 2x1,5 3G1,5 Outer Ø Cop. approx. mm weight kg/km 6,4 14,4 6,8 21,6 7,4 29,0 8,3 36,0 7,3 19,0 7,8 29,0 8,6 38,0 9,4 48,0 7,9 29,0 8,4 43,0 Weight approx. kg/km 50,0 60,0 73,0 88,0 57,0 73,0 85,0 105,0 82,0 95,0 AWG-No. 18 18 18 18 17 17 17 17 16 16  Part no. 3279_ 3280_ 3281_ 3282_ 3283_ No.cores x cross-sec. mm² 4G1,5 5G1,5 3G2,5 4G2,5 5G2,5 Outer Ø Cop. approx. mm weight kg/km 9,3 58,0 10,4 72,0 10,0 72,0 10,9 96,0 12,2 120,0 Weight approx. kg/km 117,0 144,0 152,0 192,0 243,0 AWG-No. 16 16 14 14 14  Dimensions and specifications may be changed without prior notice. (RN01) N 14 N FROR CEI 20-22 II   Technical data Cable structure Properties Ⴠ Special PVC-sheath flexible cord as per Italian standard CEI20-22 Ⴠ Temperature range flexing -5 °C to +70 °C fixed installation -35 °C to +70 °C Ⴠ Nominal voltage to 5 cores U0/U 450/750 V at 7 cores U0/U 300/500 V  Ⴠ Test voltage 2000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Radiation resistance up to 80x106 cJ/kg (80 Mrad) Ⴠ Minimum bending radius approx. 10x cable ø Ⴠ Bare copper conductor, fine wire stranded to CEI20-29 cl.5 Ⴠ Special PVC compound MiR2 Ⴠ Colour coded up and to4 cores to HELUKABEL®-JB colour code see Technical Informations Ⴠ As of 5 cores black with continuous white number printing Ⴠ Green-yellow earth core Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Special PVC outer sheath Ⴠ Sheath colour grey, similar to RAL7035, with printing CEI20-22II Ⴠ Oil- and petrol resistant as perCEI20-22II Ⴠ Conditionally resistant to Oil Solvents Acids Lyes Ⴠ PVC self-extinguishing and flame retardant, test methods analog to IEC60332-3 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core. Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm².  Application Well known companies (FIAT, COMAU, etc.) use this cable for measurement and control purposes on machine tools and conveyors, as well as on production lines in equipment production and for special mechanical engineering. These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air. Due to special conductor insulation- and sheath compound, this cable is flame resistant in case of fire and self-extinguishing. The good oil- and petrol resistance allows the usage of this cable also in problem areas. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 60250 60251 60252 60253 60254 60255 60256 60284 60285 60257 60258 60259 60260 60261 60262 60263 60264 60265 60266 60267 60286 60268 60269  No.cores x cross-sec. mm² 3G1 4G1 5G1 7G1 12G1 18G1 25G1 27G1 33G1 34G1 42G1 50G1 3G1,5 4G1,5 5G1,5 7G1,5 12G1,5 18G1,5 25G1,5 34G1,5 37G1,5 42G1,5 50G1,5 Outer Ø Cop. approx. mm weight kg/km 8,5 29,0 9,5 39,0 10,5 48,0 10,8 67,0 13,8 115,0 16,5 173,0 19,5 240,0 20,0 259,0 20,8 317,0 21,0 326,0 23,3 405,0 25,0 480,0 9,6 43,0 11,0 58,0 12,0 72,0 12,5 101,0 16,0 173,0 18,8 259,0 23,0 360,0 26,0 490,0 26,5 533,0 29,5 605,0 30,5 720,0 Weight approx. kg/km 85,0 100,0 123,0 160,0 270,0 380,0 500,0 560,0 700,0 720,0 800,0 1050,0 105,0 150,0 190,0 220,0 350,0 515,0 705,0 990,0 1005,0 1080,0 1330,0 AWG-No.  Dimensions and specifications may be changed without prior notice. (RN01) N 15 17 17 17 17 17 17 17 17 17 17 17 17 16 16 16 16 16 16 16 16 16 16 16  Part no. 60287 60270 60271 60272 60273 60274 60275 60276 60277 60278 60279 60280 60281 60282 60283 No.cores x cross-sec. mm² 3G2,5 4G2,5 5G2,5 7G2,5 12G2,5 4G4 7G4 4G6 4G10 4G16 4G25 4G35 4G50 4G70 4G95 Outer Ø Cop. approx. mm weight kg/km 11,3 72,0 12,3 96,0 12,6 120,0 14,5 168,0 18,0 288,0 14,0 154,0 16,0 269,0 16,0 230,0 19,0 384,0 23,0 614,0 28,0 960,0 31,0 1344,0 37,0 1920,0 43,0 2688,0 50,0 3648,0 Weight approx. kg/km 190,0 215,0 270,0 350,0 550,0 300,0 500,0 430,0 700,0 1000,0 1550,0 2070,0 2850,0 4000,0 5400,0 AWG-No. 14 14 14 14 14 12 12 10 8 6 4 2 1 2/0 3/0 C.N.O.M.O Type N05VV5-F according to NFC 32-207   Technical data Cable structure Properties Ⴠ Special PVC based core insulation Ⴠ As per to the french motor industry standard for tool machines04-24-22 Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -30 °C to +80 °C Ⴠ Nominal voltage 500 V Ⴠ Test voltage 2000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Radiation resistance up to 80x106 cJ/kg (80 Mrad) Ⴠ Minimum bending radius 15x cable ø Plain copper conductors Special core insulation Cores laid up Cores available in either red or black with white figure imprint Ⴠ Green-yellow earth core Ⴠ PVC outer jacket grey Ⴠ PVC self-extinguishing and flame retardant, text methodB and IEC60332-1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Ⴠ Resistant to Oil Petrol Cutting oil according to C.N.O.M.O recommendationE03.40.150N  Ⴠ Ⴠ Ⴠ Ⴠ Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ Further types and sizes available on request.  Application These cables are constructed specially for the french automobile industries and used for the installation in tool making machines, production lines, industrial plants, air conditioning as well as for use in steel production. These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 60000 60001 60002 60003 60004 60005 60006 60007 60008 60009 60010 60011 60012 60013 60014 60015 60016 60017 60018 60019 60020 60021 60022 60023 60024 60025 60026 60027 60028 60029 60030 60031 60032 60033  No.cores x cross-sec. mm² 2x0,75 3G0,75 4G0,75 5G0,75 6G0,75 12G0,75 18G0,75 27G0,75 36G0,75 48G0,75 60G0,75 2x1 3G1 4G1 5G1 6G1 12G1 18G1 27G1 36G1 48G1 60G1 2x1,5 3G1,5 4G1,5 5G1,5 6G1,5 12G1,5 18G1,5 24G1,5 27G1,5 36G1,5 48G1,5 60G1,5 Outer Ø Cop. approx. mm weight kg/km 6,2 14,4 6,6 21,6 7,2 29,0 8,0 36,0 8,9 50,0 11,6 86,0 13,9 144,0 17,2 230,0 19,7 288,0 22,8 360,0 24,9 439,0 6,5 19,0 6,9 29,0 7,7 38,0 8,5 48,0 9,2 67,0 12,4 115,0 15,2 192,0 18,7 308,0 21,1 384,0 24,3 480,0 26,4 586,0 7,5 29,0 8,1 43,0 9,1 58,0 10,1 72,0 11,0 101,0 15,1 173,0 17,9 263,0 21,0 341,0 21,8 372,0 24,5 498,0 28,4 641,0 31,3 878,0 Weight approx. kg/km 50,0 59,0 72,0 87,0 105,0 175,0 267,0 404,0 503,0 670,0 805,0 56,0 72,0 84,0 104,0 124,0 219,0 314,0 485,0 620,0 809,0 1000,0 76,0 94,0 116,0 143,0 173,0 307,0 464,0 629,0 708,0 985,0 1175,0 1415,0 AWG-No. 18 18 18 18 18 18 18 18 18 18 18 17 17 17 17 17 17 17 17 17 17 17 16 16 16 16 16 16 16 16 16 16 16 16  Part no. 60034 60035 60036 60037 60038 60039 60040 60041 60042 60043 60044 60045 60046 60047 60048 60049 60050 60051 No.cores x cross-sec. mm² 2x2,5 3G2,5 4G2,5 5G2,5 6G2,5 12G2,5 2x4 3G4 4G4 5G4 2x6 3G6 4G6 5G6 2x10 3G10 4G10 5G10 Outer Ø Cop. approx. mm weight kg/km 10,5 48,0 11,0 72,0 12,0 96,0 13,1 120,0 15,0 168,0 18,0 288,0 10,4 77,0 11,3 115,0 12,8 154,0 14,2 192,0 11,6 115,0 12,7 173,0 14,2 230,0 15,7 288,0 15,0 194,0 16,6 288,0 18,4 384,0 20,9 480,0 Weight approx. kg/km 122,0 151,0 191,0 244,0 292,0 524,0 178,0 230,0 300,0 362,0 218,0 325,0 481,0 584,0 505,0 610,0 736,0 913,0 AWG-No. 14 14 14 14 14 14 12 12 12 12 10 10 10 10 8 8 8 8  Dimensions and specifications may be changed without prior notice. (RN01) N 16 N JZ-602-CY EMC-preferred type, 90°C 600V, screened two approvals control cable, oil resistant, meter marking   Technical data Cable structure Properties Ⴠ Special PVC-insulated sheathed cable according to UL AWM Style10012 (core insulation) Style2587 and CSA Ⴠ Temperature range flexing -5 °C to +90 °C fixed installation -40 °C to +90 °C Ⴠ Nominal voltage according to UL+CSA 600 V Ⴠ Test voltage 3000 V Ⴠ Breakdown voltage min. 6000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius flexing 10x cable ø fixed installation 5x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, fine wire stranded to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation TI3, to DINVDE0281 part1 and class43 to UL-Std.1581 Ⴠ Cores black with sequential numbering imprinted in white Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal lay-length Ⴠ PVC-insulated inner sheath YM5 to DINVDE0207 part5 Ⴠ Braided screen of tinned Cu wires approx. 85% coverage Ⴠ Special PVC outer sheath YM5, to DINVDE0207 part5 and class43 to UL-Std.1581 Ⴠ Colour grey (RAL 7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Resistant to mineral oils, synthetic oils and refrigerants. The outer sheath is approved with an improved oil-resistance-test. Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ Cleanroom qualification tested with analog type. Please note "cleanroom qualified" when ordering. Ⴠ unscreened analogue type: JZ-602, see page N 7  Application UL and CSA approved flexible control cables up to 600 V, for all machinery in tooling and plant construction, suitable for installation in dry, moist or wet environments for medium mechanical loads. Designed for the export-orientated machinery manufacturer, specifically for USA and Canada. The thick braiding screen ensures compliance with electromagnetic requirements. EMC = Electromagnetic compatibility To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 82990 82991 82992 82993 82994 82995 82996 82997 82998 82999 83000 82979 82980 82981 82982 82983 82984 82985 82986 82987 82988 82989 82968 82969 82970 82971 82972 82973 82974 82975 82976  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 9G0,5 12G0,5 18G0,5 25G0,5 34G0,5 41G0,5 2x1 3G1 4G1 5G1 7G1 9G1 12G1 18G1 25G1 34G1 41G1 2x1,5 3G1,5 4G1,5 5G1,5 7G1,5 9G1,5 12G1,5 18G1,5 25G1,5 AWG-No. Outer Ø approx. mm 20 7,7 20 8,0 20 8,6 20 9,2 20 10,0 20 11,8 20 13,0 20 15,2 20 18,2 20 20,1 20 22,4 18 8,1 18 8,4 18 9,3 18 10,0 18 10,7 18 12,7 18 14,0 18 16,4 18 19,7 18 22,1 18 24,5 16 8,7 16 9,4 16 10,2 16 11,0 16 12,0 16 14,2 16 15,6 16 18,7 16 22,6 Cop. weight kg/km 35,0 42,0 47,0 56,0 69,0 87,0 108,0 145,0 240,0 312,0 348,0 50,0 60,0 71,0 88,0 111,0 139,0 184,0 260,0 349,0 486,0 531,0 63,0 80,0 97,0 119,0 147,0 182,0 267,0 374,0 526,0 Weight approx. kg/km 93,0 124,0 133,0 153,0 191,0 243,0 322,0 374,0 436,0 560,0 663,0 107,0 130,0 155,0 181,0 209,0 321,0 341,0 473,0 650,0 781,0 892,0 136,0 165,0 192,0 224,0 273,0 340,0 461,0 674,0 950,0  Part no. 82977 82978 82959 82960 82961 82962 82963 82964 82965 82966 82967 82954 82955 82956 82957 82958 82949 82950 82951 82952 82953 82945 82946 82947 82948 82941 82942 No.cores x cross-sec. mm² 34G1,5 41G1,5 2x2,5 3G2,5 4G2,5 5G2,5 7G2,5 9G2,5 12G2,5 18G2,5 25G2,5 2x4 3G4 4G4 5G4 7x4 2G6 3G6 4G6 5G6 7G6 3G10 4G10 5G10 7G10 3G16 4G16 AWG-No. Outer Ø approx. mm 16 25,5 16 27,4 14 10,3 14 10,8 14 11,7 14 13,0 14 14,2 14 15,8 14 17,1 14 18,9 14 27,8 12 12,5 12 13,1 12 14,4 12 15,8 12 17,6 10 14,2 10 15,1 10 16,5 10 18,3 10 20,9 8 19,1 8 21,1 8 23,6 8 26,4 6 24,3 6 27,5 Cop. weight kg/km 629,0 801,0 96,0 144,0 148,0 181,0 255,0 309,0 441,0 570,0 738,0 120,0 174,0 230,0 273,0 316,0 173,0 240,0 305,0 439,0 505,0 350,0 535,0 592,0 810,0 585,0 740,0 Weight approx. kg/km 1203,0 1588,0 173,0 220,0 270,0 329,0 428,0 580,0 761,0 1140,0 1551,0 209,0 310,0 456,0 532,0 737,0 318,0 411,0 572,0 732,0 961,0 741,0 988,0 1202,0 1743,0 1088,0 1662,0  Continuation Ⴇ N 17 JZ-602-CY EMC-preferred type, 90°C 600V, screened two approvals control cable, oil resistant, meter marking   Part no. 82943 82944 82937 82938 82939 82940 82934 82935 82936 82488 82780 82781 82782 82783 82914 82915 82916 82917 No.cores x cross-sec. mm² 5G16 7G16 3G25 4G25 5G25 7G25 3G35 4G35 5G35 3G50 4G50 5G50 3G70 4G70 5G70 3G95 4G95 5G95 AWG-No. Outer Ø approx. mm 6 31,2 6 34,1 4 29,9 4 32,9 4 36,4 4 39,0 2 32,8 2 36,3 2 39,9 1 35,0 1 41,0 1 44,4 2/0 41,4 2/0 46,7 2/0 50,6 3/0 46,2 3/0 51,2 3/0 56,1 Cop. weight kg/km 895,0 1282,0 1070,0 1140,0 1380,0 1870,0 1240,0 1576,0 1930,0 1675,0 2155,0 2794,0 2288,0 3120,0 3705,0 3010,0 4043,0 5026,0 Weight approx. kg/km 2021,0 2720,0 1947,0 2591,0 3197,0 4530,0 2701,0 3277,0 4530,0 2870,0 3960,0 4371,0 3647,0 4882,0 5876,0 4751,0 6368,0 7843,0  Part no. 82918 82919 82920 No.cores x cross-sec. mm² 3G120 4G120 5G120 AWG-No. Outer Ø approx. mm 4/0 52,0 4/0 58,7 4/0 62,7 Cop. weight kg/km 3812,0 5069,0 5877,0 Weight approx. kg/km 5899,0 8010,0 9205,0  Dimensions and specifications may be changed without prior notice. (RN01) Insulating, shrinking, braided and temperature protection tubes Braided hoses High temperature protection Insulation tubes Heat-shrink tubes End caps N You can find insulating, shrinking, braided and temperature protection tubes in our catalogue Cable Accessories. Request it now at www.helukabel.de N 18 JZ-603-CY Multi approvals control cable, Cu-screened, EMC-preferred, oil resistant, meter marking   Technical data Cable structure Properties Ⴠ Special PVC control cable with oil resistant outer sheath to DINVDE0281 part13, HD21.13S1 and to UL-Style2587 Ⴠ Temperature range flexing -5 °C to +70 °C (HAR) -5 °C to +90 °C (UL+CSA) fixed installation -40 °C to +70 °C (HAR) -40 °C to +90 °C (UL+CSA) Ⴠ Nominal voltage U0/U 300/500 V (HAR) U 600 V (UL+CSA) Ⴠ Test voltage 3000 V Ⴠ Breakdown voltage min. 6000 V Ⴠ Insulation resistance min. 20MOhm x km Ⴠ Minimum bending radius flexing 10x cable ø fixed installation 5x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, fine wire conductor to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation TI1, to DINVDE0281 part1, HD21.1S2 and class43 to UL-Std.1581 Ⴠ Black cores with white continuous numbering according to DIN VDE 0293 Ⴠ Green-yellow earth core in the outer layer Ⴠ Cores stranded in layers with optimal lay-length Ⴠ PVC based inner sheath Ⴠ Tinned copper braiding screening, 85% coverage Ⴠ Special PVC outer sheath TM5, oil resistant to DINVDE0281 part1, HD21.1S4 and class43 to UL-Std.1581 Ⴠ Colour grey (RAL 7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Oil resistant as per DIN EN60811-2-1, UL1581 part50.182 Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) UL VW-1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ The follwing amendments in the cable designation result from the new DINVDE0281 part13 / harmonised in accordance with HD 21.13S1: NYSLYÖ-J (new: H05VV5-F) and NYSLYCYÖ-J (new: H05VVC4V5-K). SEV-approval is no longer applicable as a result of the harmonisation. Ⴠ unscreened analogue type: JZ-603, see page N 9  Application UL-CSA-HAR approved cables offer any company exporting anywhere in the world, primarily designed for exporters, used in machine tools, control systems, assembly lines and other industrial equipment. These cables are suitable for flexible use for medium mechanical stresses with free movements in dry, moist and wet rooms but not for open air. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 83709 83720 83721 83722 83723 83724 83725 83726 83727 83728 83729 83730 83710 83731 83732 83733 83734 83735 83736 83737 83738 83739 83740 83741 83711 83742 83743 83744 83745 83746  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 12G0,5 18G0,5 25G0,5 34G0,5 41G0,5 50G0,5 61G0,5 2x0,75 3G0,75 4G0,75 5G0,75 7G0,75 12G0,75 18G0,75 25G0,75 34G0,75 41G0,75 50G0,75 61G0,75 2x1 3G1 4G1 5G1 7G1 12G1 AWG-No. Outer Ø approx. mm 20 8,0 20 8,3 20 8,9 20 9,7 20 11,2 20 13,6 20 15,4 20 18,6 20 20,8 20 22,6 20 24,8 20 26,0 19 8,3 19 8,6 19 9,4 19 10,1 19 11,9 19 14,2 19 16,6 19 20,0 19 22,4 19 24,0 19 26,2 19 30,0 18 8,6 18 9,2 18 9,8 18 10,7 18 12,5 18 15,1 Cop. weight kg/km 41,0 45,0 54,0 66,0 79,0 137,0 156,0 250,0 316,0 348,0 407,0 520,0 46,0 57,0 63,0 76,0 100,0 175,0 240,0 306,0 346,0 403,0 470,0 550,0 54,0 64,0 76,0 89,0 114,0 186,0 Weight approx. kg/km 90,0 105,0 123,0 147,0 195,0 276,0 418,0 504,0 632,0 750,0 968,0 1068,0 101,0 127,0 155,0 180,0 225,0 326,0 457,0 635,0 805,0 908,0 1155,0 1400,0 113,0 144,0 178,0 205,0 263,0 424,0  Dimensions and specifications may be changed without prior notice. (RN01) N 19  Part no. 83747 83748 83749 83750 83751 83752 83712 83753 83754 83755 83756 83757 83758 83759 83760 83761 83762 83763 83713 83764 83765 83766 83767 83768 83769 83770 83771 83772 83773 No.cores x cross-sec. mm² 18G1 25G1 34G1 41G1 50G1 61G1 2x1,5 3G1,5 4G1,5 5G1,5 7G1,5 12G1,5 18G1,5 25G1,5 34G1,5 41G1,5 50G1,5 61G1,5 2x2,5 3G2,5 4G2,5 5G2,5 7G2,5 12G2,5 18G2,5 25G2,5 34G2,5 50G2,5 61G2,5 AWG-No. Outer Ø approx. mm 18 17,3 18 21,1 18 23,5 18 25,5 18 27,6 18 32,4 16 9,6 16 10,1 16 11,0 16 12,3 16 14,2 16 17,1 16 20,0 16 24,0 16 27,1 16 29,7 16 31,8 16 34,6 14 11,4 14 12,0 14 13,4 14 14,6 14 17,2 14 21,2 14 24,8 14 29,8 14 33,4 14 39,0 14 41,0 Cop. weight kg/km 284,0 387,0 500,0 578,0 681,0 710,0 64,0 82,0 99,0 123,0 148,0 274,0 386,0 531,0 671,0 840,0 997,0 1120,0 110,0 148,0 169,0 220,0 284,0 470,0 572,0 740,0 1179,0 1660,0 1992,0 Weight approx. kg/km 560,0 760,0 945,0 1151,0 1300,0 1500,0 144,0 160,0 210,0 240,0 305,0 482,0 611,0 950,0 1200,0 1400,0 1665,0 1852,0 189,0 244,0 296,0 367,0 478,0 622,0 1010,0 1375,0 1893,0 2666,0 3077,0 JZ-600-Y-CY UL/CSA flexible, number coded, 0,6/1kV, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special PVC control cables Ⴠ Adapted to DINVDE0276 part627, DINVDE0281 part13, with insulation thickness for 1 kV type and UL-Std.758 Style21179 Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -40 °C to +90 °C Ⴠ Nominal voltage U 1000 V Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Power rating according to DIN VDE 0298 Ⴠ Minimum bending radius flexing 10x cable ø fixed installation 5x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, fine wire conductors, according to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation TI2, to DINVDE0281 part1, class43 UL-Std.1581 Ⴠ Black cores with sequential numbering imprinted in white, according to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal lay-length Ⴠ PVC-insulated inner sheath TM2, to DINVDE0281 part1, class43 UL-Std.1581 Ⴠ Braided screen of tinned Cu wires, coverage approx. 85% Ⴠ Special PVC outer sheath TM2, to DINVDE0281 part1 class43 UL-Std.1581 Ⴠ Colour black (RAL9005) or grey (RAL7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Extensively oil resistant, oil-/ chemical Resistance - see table Technical Informations Ⴠ UV-resistant(building with black jacket) Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) VW-1, FT1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ unscreened analogue type: JZ-600 UL/CSA, see page N 10  Application Wiring cable for measuring and controlling purposes in tool machinery, conveyor belts and production lines, for plant installations, air conditioning and in steel production plants and rolling mills. Suitable for installation for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms as well as outside (fixed installation, building with black jacket). Is not suitable to be used as direct burrial- or as underwater cable. Interference-free transmission of signals and pulses is assured by the high degree of screening. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x Jacket cross-sec. colour mm² black 12345 2x0,5 12346 3G0,5 12347 4G0,5 12348 5G0,5 12349 7G0,5 12350 12G0,5 12351 18G0,5 12352 25G0,5 12353 2x0,75 12354 3G0,75 12355 4G0,75 12356 5G0,75 12357 7G0,75 12358 12G0,75 12359 18G0,75 12360 25G0,75 12361 2x1 12362 3G1 12363 4G1 12364 5G1 12365 7G1 12366 12G1 12367 18G1 12368 25G1 12369 2x1,5 12370 3G1,5 12371 4G1,5  AWG-No. 20 20 20 20 20 20 20 20 19 19 19 19 19 19 19 19 18 18 18 18 18 18 18 18 16 16 16 Outer Ø Cop. approx. mm weight kg/km 8,3 8,6 9,4 10,1 12,1 14,7 17,3 20,6 8,7 9,0 9,9 10,8 13,0 15,8 17,9 22,8 9,4 9,8 10,8 12,1 14,5 17,4 20,7 24,8 10,2 10,9 12,2 41,0 45,0 54,0 66,0 79,0 137,0 156,0 250,0 46,0 57,0 63,0 76,0 100,0 175,0 240,0 306,0 54,0 64,0 76,0 89,0 114,0 186,0 284,0 387,0 64,0 82,0 99,0 Weight approx. kg/km 129,0 150,0 170,0 199,0 235,0 320,0 428,0 503,0 143,0 155,0 190,0 228,0 323,0 410,0 560,0 730,0 150,0 163,0 200,0 239,0 289,0 464,0 628,0 855,0 162,0 187,0 240,0  Part no. No.cores x Jacket cross-sec. colour mm² grey 12410 2x0,5 12411 3G0,5 12412 4G0,5 12413 5G0,5 12414 7G0,5 12415 12G0,5 12416 18G0,5 12417 25G0,5 12418 2x0,75 12419 3G0,75 12420 4G0,75 12421 5G0,75 12422 7G0,75 12423 12G0,75 12424 18G0,75 12425 25G0,75 12426 2x1 12427 3G1 12428 4G1 12429 5G1 12430 7G1 12431 12G1 12432 18G1 12433 25G1 12434 2x1,5 12435 3G1,5 12436 4G1,5 AWG-No. 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 17 17 17 17 17 17 17 17 16 16 16 Outer Ø Cop. approx. mm weight kg/km 8,3 8,6 9,4 10,1 12,1 14,7 17,3 20,6 8,7 9,0 9,9 10,8 13,0 15,8 17,9 22,8 9,4 9,8 10,8 12,1 14,5 17,4 20,7 24,8 10,2 10,9 12,2 30,0 39,0 52,0 61,0 75,0 130,0 170,0 230,0 39,0 57,0 68,0 79,0 96,0 169,0 224,0 292,0 52,0 67,0 78,0 94,0 122,0 201,0 275,0 364,0 68,0 84,0 104,0 Weight approx. kg/km 129,0 150,0 170,0 199,0 235,0 320,0 428,0 503,0 143,0 155,0 190,0 228,0 323,0 410,0 560,0 730,0 150,0 163,0 200,0 239,0 289,0 464,0 628,0 855,0 162,0 187,0 240,0  Continuation Ⴇ N 20 N JZ-600-Y-CY UL/CSA flexible, number coded, 0,6/1kV, EMC-preferred type, meter marking  Part no. No.cores x Jacket cross-sec. colour mm² black 12372 5G1,5 12373 7G1,5 12374 12G1,5 12375 18G1,5 12376 25G1,5 12377 2x2,5 12378 3G2,5 12379 4G2,5 12380 5G2,5 12381 7G2,5 12382 12G2,5 12383 18G2,5 12384 25G2,5 12385 2x4 12386 3G4 12387 4G4 12388 5G4 12389 7G4 12390 3G6 12391 4G6 12392 5G6 12393 7G6 12394 3G10 12395 4G10 12396 5G10 12397 7G10 12398 3G16 12399 4G16 12400 5G16 12401 7G16 12402 3G25 12403 4G25 12404 5G25 12405 7G25  AWG-No. 16 16 16 16 16 14 14 14 14 14 14 14 14 12 12 12 12 12 10 10 10 10 8 8 8 8 6 6 6 6 4 4 4 4 Outer Ø Cop. approx. mm weight kg/km 13,3 16,0 19,6 23,4 28,2 11,5 12,2 13,4 14,9 17,9 21,9 26,1 31,9 14,3 15,1 16,7 18,6 20,0 17,0 18,7 20,7 23,0 19,6 21,9 24,1 26,8 23,5 26,4 28,8 31,9 28,0 32,5 35,7 39,0 123,0 148,0 274,0 386,0 531,0 110,0 148,0 169,0 220,0 284,0 470,0 572,0 740,0 124,0 178,0 234,0 284,0 321,0 245,0 316,0 442,0 530,0 367,0 549,0 604,0 820,0 653,0 807,0 940,0 1345,0 920,0 1169,0 1420,0 1921,0 Weight approx. kg/km 289,0 383,0 592,0 806,0 1241,0 272,0 298,0 345,0 427,0 561,0 857,0 1355,0 1995,0 306,0 391,0 527,0 700,0 920,0 629,0 731,0 1105,0 1465,0 1125,0 1345,0 1635,0 2210,0 1395,0 1870,0 2720,0 3213,0 2465,0 2750,0 3490,0 4980,0  Dimensions and specifications may be changed without prior notice. (RN01) N 21  Part no. No.cores x Jacket cross-sec. colour mm² grey 12437 5G1,5 12438 7G1,5 12439 12G1,5 12440 18G1,5 12441 25G1,5 12442 2x2,5 12443 3G2,5 12444 4G2,5 12445 5G2,5 12446 7G2,5 12447 12G2,5 12448 18G2,5 12449 25G2,5 12450 2x4 12451 3G4 12452 4G4 12453 5G4 12454 7G4 12455 3G6 12456 4G6 12457 5G6 12458 7G6 12459 3G10 12460 4G10 12461 5G10 12462 7G10 12463 3G16 12464 4G16 12465 5G16 12466 7G16 12467 3G25 12468 4G25 12469 5G25 12470 7G25 AWG-No. 16 16 16 16 16 14 14 14 14 14 14 14 14 12 12 12 12 12 10 10 10 10 8 8 8 8 6 6 6 6 4 4 4 4 Outer Ø Cop. approx. mm weight kg/km 13,3 16,0 19,6 23,4 28,2 11,5 12,2 13,4 14,9 17,9 21,9 26,1 31,9 14,3 15,1 16,7 18,6 20,0 17,0 18,7 20,7 23,0 19,6 21,9 24,1 26,8 23,5 26,4 28,8 31,9 28,0 32,5 35,7 39,0 123,0 180,0 284,0 390,0 521,0 99,0 124,0 170,0 202,0 268,0 423,0 572,0 740,0 156,0 191,0 236,0 303,0 394,0 251,0 319,0 421,0 561,0 371,0 576,0 620,0 842,0 540,0 807,0 1394,0 1605,0 820,0 1169,0 1850,0 2140,0 Weight approx. kg/km 289,0 383,0 592,0 806,0 1241,0 272,0 298,0 345,0 427,0 561,0 857,0 1355,0 1995,0 306,0 391,0 527,0 700,0 920,0 629,0 731,0 1105,0 1465,0 1125,0 1345,0 1635,0 2210,0 1395,0 1870,0 2720,0 3213,0 2465,0 2750,0 3490,0 4980,0 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ x 1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ 1)3$(GLWLRQ x1)3$(GLWLRQ x 1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ x1)3$(GLWLRQ 1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQx1)3$(GLWLRQ Photo: HELUKABEL® NFPA 79 Edition 2007 Challenges and solutions N 22 N NFPA 79 Edition 2012 – Challenges and solutions The first edition of the Electrical Code (NEC), also referred to as NFPA 70, was published in 1897. The NEC is the only code for electrical installations that enjoys national recognition in the USA. It addresses the causes of electricity-induced fire. The code is updated every three years, that means in 2011 appeared the edition of 2012. In Article 670 “Industrial Machinery“ the NEC refers to the NFPA 79 (Electrical Standard for Industrial Machinery). This standard specifies the safety requirements for electrical equipment of industrial machinery or industrial manufacturing systems. Manufacturers and operators of plant and machinery have to comply with this and other standards in order to fulfil their product liability and satisfy insurance requirements. Machines commissioned in the USA are always subject to approval, which can be obtained in two different ways. One is through a testing institute accredited in the USA, alternatively the machine concerned is subjected to an acceptance procedure in Germany, for example. The final decision on whether a machine is to be commissioned is always taken by a local inspector, who does not necessarily have to be an expert in electrical systems. If the inspector is in any doubt as to whether the machine complies with the relevant US standards, he may order a temporary stoppage. The NFPA 79: 2007 allowed for the use of AWM wires in chapter 12.2.7.3 „When part of a listed assembly suitable for the intended application, type AWM shall be permissible“. However, there are applications for which there had up to now not been any NFPA 79-relevant wires. This applies to wires used for power track chains or wires with special-purpose bodies. There were objections and protests from the industry in this regard. The NFPA responded accordingly and appointed an expert commission. As a result, the NFPA 79: Edition 2012 once again allows for the use of AWM wires under certain conditions. As before, usage is not unrestricted. Rather, responsibility for their usage now lies with the manufacturer or builder of the system. Article 12.2.7.of Edition 2007 was deleted entirely. The new article 12.9 summarizes all recommendations. The complete original text: 12.9 12.9.1 Special Cables and Conductors Other listed cables and conductors shall be permitted where identified as suitable for the identified use. 12.9.2 Appliance Wiring Material (AWM) shall be permitted under 12.9.2.1 through 12.9.2.3 12.9.2.1 Where part of an assembly that has been identified for intended use 12.9.2.2 Where specified for use with approved equipment and used in accordance with the equipment manufacturers instructions. 12.9.2.3 Where its construction meets all applicable requirements of sections 12.2 – 12.6 with modifications as folIows: (1) Stranded conductors with wire sizes smaller than those listed in 12.2.2 shall have a minimum of 7 strands. (2) Conductor insulation and cable jacket materials not specified in 12.3.1 have flame resistant properties in compliance with applicable standards for intended use such as FT2 (horizontal wire) flame test or VW-1 (Vertical Wire) flame test in ANSI/UL 1581-2001, Reference Standard for Electrical Wires, Cables and Flexible Cords. (3) Minimum insulation thickness for single conductor AWM shall be as specified in 12.3.2. Minimum insulation thickness for conductors that are part of a multi conductor jacketed AWM cable shall be as specified by the AWM Style number and by the marked voltage rating of the cable. (4) AWM shall be marked in accordance with 12.4.1, 12.4.3 and 12.4.4. The legend shall include manufacturer‘s name or trademark, AWM style number, voltage rating (unless marking is prohibited by 12.4.2), wire gauge(s), temperature rating and flame resistance. Additional markings for properties such as oil, water, UV and chemical resistance identifiers shall be permitted where in compliance with applicable standards for intended use. Where markings alone are insufficient to identify for the intended application, suitable information shall be included with the technical machine documentation. Summary • Plant and machinery with certification (e.g. from UL) can continue to be repaired, modified or upgraded in accordance with existing rules. • Newly certified plant and machinery can continue to be constructed in accordance with existing rules. The certification is recognised. • In certain sectors, new plant and machinery without certification may need to satisfy tougher requirements for certain cables (e.g. UL Listing). In this case, consultation is required with the certifying body concerned. HELUKABEL recommends in many cases still the use of UL-listed cables. The following pages present a broad range of cables that already meet the requirements of the 2007 Edition of NFPA 79. If you have any further questions, please contact our cable experts on +49 (0)7150 9209 -0. N 23 NFPA 79 Edition 2012 – Challenges and solutions Flexible Control Cables TRAYCONTROL 500 & TRAYCONTROL 500-C Flexible, extremely oil-resistant control cables for open installation (ER) UL: TC-ER, PLTC-ER, ITC-ER, MTW, DP-1, WTTC 1000V, OIL RES I & II CSA: CIC-TC FT4, AWM I/II A/B FT4 See page N 27 - N 28 and N 35 - N 36 TRAYCONTROL 600 & TRAYCONTROL 600-C Flexible, oil-resistant TRAY CABLE for open installation (ER) UL: TC-ER, PLTC-ER, ITC-ER, MTW, DP-1, WTTC 1000V, OIL RES I CSA: CIC-TC FT4, AWM I/II A/B FT4 See page N 30 - N 31 and N 37 THHN/THWM Flexible jumper wire UL: MTW, THHN, THWN, GASOLINE, OIL RES II, AWM W-51554 See page N 115 Servo and Motor Cables TOPFLEX® 600 VFD Flexible, extremely oil-resistant motor connection cables for open installation (ER) UL: TC-ER, PLTC-ER, ITC-ER, MTW, WTTC 1000V, OIL RES I & II CSA: CIC-TC FT4, AWM I/II A/B FT4 See page N 137 TOPFLEX® 650 VFD JZ 604 TC & JZ 604-FCY/YCY TC Flexible, oil-resistant TRAY CABLE for open installation (ER) UL: TC-ER See page N 25 - N 26 and N 33 - N 34 Hochflexible Steuerleitungen MULTIFLEX 600 & MULTIFLEX 600-C Highly-flexible, extremely oil-resistant cables for open installation (ER) UL: TC-ER, PLTC-ER, ITC-ER, MTW, DP-1, WTTC 1000V, OIL RES I & II CSA: CIC-TC FT4, AWM I/II A/B FT4 See page N 62 - N 63 Data Cables TRAYCONTROL 300 & TRAYCONTROL 300-C Flexible, extremely oil-resistant data and control cables for open installation (ER)* UL: PLTC-ER, ITC-ER, CM, OIL RES I & II; CSA: CIC-TC FT4, CMG See page N 38 - N 41 TRAYCONTROL 300 TP & TRAYCONTROL 300-C TP Flexible, extremely oil-resistant data and control cables for open installation (ER)* UL: PLTC-ER, ITC-ER, CM, OIL RES I & II; CSA: CIC-TC FT4, CMG See page N 42 - N 45 Single Conductors FIVENORM The jumper wire that meets five different standards HAR: H05 V2-K/H07 V2-K; UL: MTW, AWM Style 10269; CSA: TEW bzw. AWM I/A/B See page N 113 - N 114 Flexible, extremely oil-resistant motor connection cables with control pair for open installation (ER) UL: TC-ER, PLTC-ER, ITC-ER, MTW, WTTC 1000V, OIL RES I & II CSA: CIC-TC FT4, AWM I/II A/B FT4 See page N 138 TOPSERV® 600 VFD Highly-flexible, extremely oil-resistant motor connection cables for open installation (ER) UL: TC-ER, PLTC-ER, ITC-ER, MTW, WTTC 1000V, OIL RES I & II CSA: CIC-TC FT4, AWM I/II A/B FT4 See page N 139 TOPSERV® 650 VFD Highly-flexible, extremely oil-resistant motor connection cables for open installation (ER) UL: TC-ER, PLTC-ER, ITC-ER, MTW, WTTC 1000V, OIL RES I & II CSA: CIC-TC FT4, AWM I/II A/B FT4 See page N 140 N HELUKAT® Copper Data Cables HELUKAT® 155 UTP 4x2xAWG24/1 UL CMX 444 HELUKAT® 200 FTP FLEX 4x2xAWG26/7 UL CMX 444 HELUKAT® 300 UTP 4x2xAWG24/1 UL CMX 444 HELUKAT® 300 U-STP 4x2xAWG26/7 UL CMX 444 See page R 51 et seq. Bus Cables PROFInet Typ A UL CMG or PLTC, CSA FT4 PROFInet Typ B UL CMG or PLTC PROFInet Typ B SHIPLINE UL CMG or PLTC, CSA FT4 PROFInet Typ C UL CMG Profibus L2 Torsion UL CMX Profibus L2 Festoon UL CMX, CSA FT4 Profibus SK inside UL CMG, CSA FT4 Profibus SK FRNC UL CM Profibus SK drag chain UL CMX DeviceNet™PVC small UL CMG FT4 DeviceNet™PVC thick UL CMG FT4 See Chapter R * AWG 22 - AWG 16 N 24 JZ 604 TC TRAY CABLE PVC power cable, exposed run, 90°C, 600V, meter marking   Technical data Cable structure Properties Ⴠ PVC power cable to UL-standard1277 TRAY CABLE Ⴠ Multinorm The TRAY CABLE also conforms to the following standards: AWM-Style2587 to UL-Std.758 and CSA C22.2 No210.2 I/II A/B90C600V Ⴠ Temperature range dry environment flexing -5 °C to +90 °C fixed installation -25 °C to +90 °C wet environment flexing -5 °C to +75 °C fixed installation -25 °C to +75 °C Ⴠ Nominal voltage to UL 600 V Ⴠ Test voltage 3000 V Ⴠ Breakdown voltage min. 6000V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius 7,5x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductors, according to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation class12B to table50.155 UL-standard1581, type TFF to UL-Std.66 (AWG20-AWG16), type THHW to UL-Std.83 ( ุ AWG  14) Ⴠ Black cores with continuous white numbering according to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal lay-lengt Ⴠ Special PVC outer sheath, to UL-Std.1277 table11.2 Ⴠ Sheath colour black (RAL9005) Ⴠ with meter marking, change-over in 2011 Ⴠ Material self-extinguishing and flame retardant Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ unscreened analogue type: JZ 604-FCY TC TRAY CABLE , see page N 33 JZ 604-YCY TC TRAY CABLE , see page N 34  Application USA NFPA79, edition 2007 conformant flexible power cables up to 600 V, for all machinery in tool and plant constuction, suitable for installation in dry, humid and damp environments, in the open and in pipes. For underground installation and for open, unprotected installation from the cable rack to machines and industrial plants. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 69661 69662 69663 69664 69665 69666 69667 69668 69669 69670 69671 69672 69673 69674 69675 69676 69677 69678 69679 69680 69681 69682 69683 69684 69685 69686 69687 69688  No.cores x cross-sec. mm² 2x1 3G1 4G1 5G1 7G1 9G1 10G1 12G1 18G1 25G1 34G1 50G1 2x1,5 3G1,5 4G1,5 5G1,5 7G1,5 8G1,5 9G1,5 10G1,5 12G1,5 16G1,5 18G1,5 25G1,5 34G1,5 41G1,5 50G1,5 61G1,5 AWG-No. Outer Ø approx. mm 18 8,0 18 8,4 18 9,1 18 10,0 18 11,7 18 12,6 18 14,3 18 14,7 18 17,1 18 20,3 18 23,7 18 26,1 16 8,4 16 8,8 16 9,6 16 10,5 16 12,3 16 13,3 16 13,3 16 15,1 16 15,6 16 17,1 16 18,2 16 22,7 16 25,3 16 27,0 16 27,3 16 29,4 Cop. weight kg/km 19,2 29,0 39,0 48,0 67,0 84,0 96,0 115,0 173,0 240,0 326,0 480,0 28,8 43,0 58,0 72,0 101,0 115,0 130,0 144,0 173,0 230,0 259,0 360,0 489,0 590,0 720,0 878,0 Weight approx. kg/km 72,0 84,0 96,0 114,0 147,0 172,0 206,0 256,0 367,0 477,0 551,0 959,0 88,0 102,0 119,0 144,0 192,0 213,0 261,0 294,0 328,0 402,0 427,0 594,0 714,0 803,0 1021,0 1238,0  Part no. 69689 69690 69691 69692 69693 69694 69695 69696 69697 69698 69699 69700 69701 69702 69703 69704 69705 69706 69707 69708 69709 69710 69711 69712 69713 69714 No.cores x cross-sec. mm² 2x2,5 3G2,5 4G2,5 5G2,5 7G2,5 8G2,5 9G2,5 10G2,5 12G2,5 18G2,5 25G2,5 3G4 4G4 5G4 7G4 9G4 12G4 18G4 3G6 4G6 5G6 7G6 3G10 4G10 5G10 7G10 AWG-No. Outer Ø approx. mm 14 9,4 14 9,9 14 10,8 14 11,8 14 14,7 14 16,0 14 16,0 14 17,1 14 17,7 14 20,8 14 25,8 12 11,0 12 12,0 12 13,2 12 16,5 12 17,8 12 19,9 12 24,2 10 12,5 10 14,5 10 15,8 10 17,3 8 16,9 8 18,6 8 20,4 8 23,5 Cop. weight kg/km 48,0 72,0 96,0 120,0 168,0 192,0 216,0 240,0 288,0 432,0 600,0 115,0 154,0 192,0 269,0 346,0 461,0 691,0 173,0 230,0 288,0 403,0 288,0 384,0 480,0 672,0 Weight approx. kg/km 108,0 137,0 157,0 190,0 253,0 339,0 341,0 392,0 470,0 682,0 891,0 187,0 226,0 280,0 390,0 480,0 841,0 981,0 290,0 381,0 465,0 654,0 511,0 584,0 781,0 970,0  Continuation Ⴇ N 25 JZ 604 TC TRAY CABLE PVC power cable, exposed run, 90°C, 600V, meter marking   Part no. 69715 69716 69717 69718 69719 69720 69721 69722 69723 69724 69725 69726 69727 69728 No.cores x cross-sec. mm² 3G16 4G16 5G16 7G16 3G25 4G25 5G25 7G25 3G35 4G35 5G35 3G50 4G50 5G50 AWG-No. Outer Ø approx. mm 6 21,0 6 23,9 6 26,3 6 28,8 4 24,9 4 27,2 4 30,3 4 33,1 2 27,1 2 29,8 2 33,0 1 33,2 1 36,7 1 41,5 Cop. weight kg/km 461,0 614,0 768,0 1075,0 720,0 960,0 1200,0 1680,0 1008,0 1344,0 1680,0 1440,0 1920,0 2400,0 Weight approx. kg/km 651,0 866,0 1117,0 1364,0 1090,0 1421,0 1611,0 1943,0 1734,0 2011,0 2347,0 2041,0 2539,0 2894,0  Part no. 69729 69730 69731 69732 69733 69734 69735 69736 69737 No.cores x cross-sec. mm² 3G70 4G70 5G70 3G95 4G95 5G95 3G120 4G120 5G120 AWG-No. Outer Ø approx. mm 2/0 37,6 2/0 42,0 2/0 47,6 3/0 41,8 3/0 47,0 3/0 52,5 4/0 46,0 4/0 51,5 4/0 56,5 Cop. weight kg/km 2016,0 2688,0 3360,0 2736,0 3648,0 4560,0 3456,0 4608,0 5760,0 Weight approx. kg/km 2831,0 3494,0 4260,0 5010,0 6104,0 7891,0 5940,0 7604,0 8751,0  Dimensions and specifications may be changed without prior notice. (RN01) Terminations and straight-through joints Telephone calbes Low voltage Medium voltage Accessories N You can find terminations and straight-through joints in our catalogue Cable Accessories. Request it now at www.helukabel.de N 26 TRAYCONTROL 500 flexible, oil-resistant, open installation TC-ER, PLTC-ER, ITC-ER, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ PVC control cable according to UL Standard 1277 Ⴠ Temperature range Flexing -5 °C to +90 °C Fixed installation -40 °C to +90 °C Ⴠ Nominal voltage TC 600 V AWM 1000 V TC Wind Turbine (WTTC) 1000 V Ⴠ Testvoltage 3000V Ⴠ Minimum bending radius Flexing 4x cable ø Ⴠ Insulation resistance Min. 20 MOhm x km  Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper conductor, fine wire stranded Ⴠ Special PVC core insulation with transparent nylon skin Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer, 3 cores and more Ⴠ Cores stranded in layers with optimal lay-lengths Ⴠ Separator Ⴠ Special PVC outer jacket Ⴠ Sheath colour - grey (RAL 7001) Ⴠ With lenght marking in feet  Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Ⴠ Tests UL: TC-ER, PLTC-ER (AWG 18 - AWG 12), ITC-ER (AWG 18 - AWG 12), MTW, NFPA 79 2007, WTTC 1000V, DP-1, OIL RES I & II, 90 °C dry / 75 °C wet, Class 1 Div. 2 per NEC Art 336, 392, 501, crush impact test in accordance with UL 1277 CSA: c(UL) CIC-TC FT4, CSA AWM I/II A/B FT4  Note Advantages Ⴠ Highly-flexible, easy to install Available on request Ⴠ withblue cores(DC) Ⴠ with red cores(AC) Ⴠ Black or TPE outer sheath  Application HELUKABEL® TRAYCONTROL 500 is a flexible, oil-resistant control cable. The special combination of TC-ER, PLTC-ER and ITC-ER allows this cable to be used as a connecting cable for industrial plant and machinery in accordance withNFPA 79 Edition 2007. Approved for open, unprotected installation in cable trays to the machine. Its outstanding oil resistance (OIL RES I & II) guarantees a long service life for industrial applications in dry, damp and wet environments. Recommended applications: production lines, bottling plants, machine construction, switch cabinets, conveyor systems, packaging machines, automotive industry. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 63079 63080 63081 63082 63083 63084 63085 63086 63087 63088 63089 63090 63091 63092 63093 63094 63095 63096 63097 63098 63099 63100 63101 63102 63103 63104 63105 63106  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 9G0,5 12G0,5 18G0,5 25G0,5 2x1 3G1 4G1 5G1 7G1 9G1 10G1 12G1 15G1 16G1 18G1 19G1 25G1 27G1 34G1 37G1 41G1 50G1 61G1 AWG-No. Outer Ø approx. mm 20 6,4 20 6,7 20 7,2 20 7,8 20 8,4 20 9,6 20 10,7 20 12,4 20 14,9 18 7,0 18 7,1 18 8,0 18 8,6 18 9,3 18 10,7 18 11,6 18 11,9 18 13,2 18 13,3 18 366,0 18 14,7 18 17,0 18 17,4 18 19,3 18 19,8 18 20,7 18 23,5 18 24,9 Cop. weight kg/km 10,0 14,0 19,0 24,0 34,0 43,0 58,0 86,0 120,0 19,0 29,0 38,0 48,0 67,0 86,0 96,0 115,0 144,0 154,0 14,6 182,0 240,0 259,0 326,0 355,0 394,0 480,0 586,0 Weight approx. kg/km 58,0 61,0 76,0 89,0 120,0 201,0 250,0 295,0 362,0 68,0 88,0 98,0 116,0 149,0 186,0 199,0 245,0 292,0 306,0 173,0 384,0 451,0 521,0 625,0 684,0 744,0 933,0 1095,0  Part no. 63107 63108 63109 63110 63111 63112 63113 63114 63115 63116 63117 63118 63119 63120 63121 63122 63123 63124 63125 63126 63127 63128 63129 63130 63131 63132 63133 63164 No.cores x cross-sec. mm² 2x1,5 3G1,5 4G1,5 5G1,5 4G2,5 6G1,5 7G1,5 8G1,5 9G1,5 10G1,5 12G1,5 14G1,5 15G1,5 16G1,5 18G1,5 19G1,5 20G1,5 25G1,5 27G1,5 30G1,5 34G1,5 40G1,5 41G1,5 50G1,5 61G0,5 2x2,5 3G2,5 5G2,5 AWG-No. Outer Ø approx. mm 16 7,7 16 8,1 16 8,8 16 9,5 14 9,8 16 10,0 16 10,3 16 10,9 16 11,9 16 12,9 16 14,2 16 14,5 16 15,2 16 15,9 16 16,4 16 16,5 16 17,0 16 18,6 16 19,0 16 19,6 16 20,5 16 22,9 16 23,4 16 25,1 16 27,2 14 8,6 14 8,9 14 10,6 Cop. weight kg/km 29,0 43,0 58,0 72,0 96,0 86,0 101,0 115,0 130,0 144,0 173,0 202,0 216,0 14,0 259,0 274,0 288,0 360,0 389,0 432,0 490,0 576,0 590,0 720,0 878,0 48,0 72,0 120,0 Weight approx. kg/km 80,0 86,0 115,0 126,0 141,0 164,0 171,0 201,0 237,0 259,0 301,0 365,0 379,0 61,0 443,0 458,0 491,0 564,0 629,0 701,0 775,0 946,0 967,0 1137,0 1345,0 100,0 112,0 152,0  Continuation Ⴇ N 27 TRAYCONTROL 500 flexible, oil-resistant, open installation TC-ER, PLTC-ER, ITC-ER, NFPA 79 Edition 2007  Part no. 63165 63166 63167 63168 63169 63170 63171 63172 63173 63174 63175 63176 63177 63178 63179 63180 63181 63182 63183 63184 63185 63186 63187  No.cores x cross-sec. mm² 6G2,5 7G2,5 9G2,5 10G2,5 12G2,5 16G2,5 18G2,5 19G2,5 25G2,5 2x4 3G4 4G4 5G4 6G4 7G4 9G4 12G4 16G4 19G4 20G4 25G4 2x6 3G6 AWG-No. Outer Ø approx. mm 14 11,2 14 11,6 14 14,3 14 15,5 14 15,9 14 17,6 14 18,4 14 18,6 14 22,2 14 9,5 14 10,6 14 11,5 14 12,6 12 14,1 12 14,6 12 16,9 12 18,9 12 19,8 12 23,1 12 24,3 12 26,3 10 11,9 10 12,6 Cop. weight kg/km 144,0 168,0 216,0 240,0 288,0 384,0 432,0 456,0 600,0 76,8 115,0 154,0 192,0 230,0 269,0 346,0 461,0 614,0 768,0 768,0 960,0 115,0 173,0 Weight approx. kg/km 205,0 216,0 312,0 378,0 434,0 550,0 616,0 634,0 817,0 132,0 177,0 201,0 274,0 315,0 353,0 476,0 613,0 783,0 918,0 961,0 1236,0 213,0 283,0  Part no. 63188 63189 63190 63191 63192 63193 63194 63195 63196 63197 63198 63199 62802 62803 62804 62805 62806 62807 62808 62809 62810 62811 62812 No.cores x cross-sec. mm² 4G6 5G6 7G6 9G6 12G6 19G6 3G10 4G10 5G10 3G16 4G16 5G16 3G25 4G25 5G25 3G35 4G35 5G35 4G42,3 4G52,9 4G67,3 4G84,4 4G106,7 AWG-No. Outer Ø approx. mm 10 14,7 10 16,0 10 17,4 10 20,4 10 23,9 10 27,9 8 17,0 8 19,7 8 21,7 6 19,5 6 21,9 6 24,0 4 24,3 4 27,1 4 29,3 2 27,9 2 31,4 2 34,0 1 34,8 1/0 37,9 2/0 41,3 3/0 48,6 4/0 51,2 Cop. weight kg/km 230,0 288,0 403,0 518,0 691,0 1094,0 288,0 384,0 480,0 461,0 614,0 768,0 720,0 960,0 1200,0 1008,0 1344,0 1680,0 1624,0 2031,0 2584,0 3256,0 4097,0 Weight approx. kg/km 387,0 473,0 607,0 771,0 1061,0 1528,0 420,0 662,0 784,0 701,0 908,0 1149,0 1061,0 1366,0 1631,0 1480,0 1922,0 2363,0 2397,0 2938,0 3559,0 4181,0 5747,0  Dimensions and specifications may be changed without prior notice. (RN01) N N 28 TRAYCONTROL 530 flexible TC-ER control cable with coloured cores   Technical data Cable structure Properties Ⴠ Flexible PVC tray cable to UL Standard 1277 Temperature range flexing -5 °C to +90 °C fixed installation -40 °C to +90 °C Ⴠ Nominal voltage TC 600 V AWM 1000 V TC Wind Turbine (WTTC) 1000 V Ⴠ Test voltage 3000 V Ⴠ Minimum bending radius Approx. 5x cable ø Ⴠ Bare copper conductor, fine wire stranded with AWG dimensions Ⴠ Special PVC core insulation withclear nylon jacket Ⴠ Blue coreswith continuous numberingplus green/yellow ground, 3 cores and more> second core is blue-white Ⴠ Conductor cabled with non-wicking fillers Ⴠ Separator Ⴠ Sheath colour -grey (RAL 7001) Ⴠ Material self-extinguishing and flame retardant to UL-Standard in accordance CSA FT4 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Ⴠ Tests UL: TC-ER, PLTC-ER (AWG 18 - AWG 12), ITC-ER (AWG 18 - AWG 12), MTW, NFPA 79 2007, WTTC 1000V, DP-1, OIL RES I & II, 90ºCdry / 75ºC wet, Class 1 Div. 2 per NEC Art 336, 392, 501, crush impact testin accordance withUL 1277 CSA: c(UL) CIC-TC FT4 CSA AWM I/II A/B FT4  Note Available on request Ⴠ with red, black, yellow or orange cores Ⴠ Black or TPE outer sheath  Application TRAYCONTROL 530 is a flexible, oil-resistant control cable. The special combination of TC-ER, PLTC-ER and ITC-ER allows this cable to be used as a connecting cable for AC, DC or control wiring in accordance with NFPA 79 Edition 2007. Approved for open, unprotected installation in cable trays to the machine. Its outstanding oil resistance (OIL RES I & II) guarantees a long service life for industrial applications in dry, damp and wet environments. Recommended Applications: automotive industry, machine tool, production lines = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 66840 66841 66842 66843 66844 66845 66846 66847 66848 66849 66850 66851 66852 66853 66854 66855 66856 66857 66858 66859 66860 66861  No.cores x cross-sec. mm² 2x1 3G1 4G1 5G1 7G1 9G1 10G1 12G1 15G1 16G1 18G1 19G1 25G1 27G1 33G1 34G1 41G1 42G1 49G1 50G1 61G1 65G1 AWG-No. Outer Ø approx. mm 18 7,0 18 7,1 18 8,0 18 8,6 18 9,3 18 10,7 18 11,6 18 11,9 18 13,2 18 13,3 18 14,6 18 14,7 18 17,0 18 17,4 18 18,7 18 19,3 18 20,7 18 20,8 18 23,0 18 23,5 18 24,9 18 25,6 Cop. weight kg/km 19,0 29,0 38,0 48,0 67,0 86,0 96,0 115,0 144,0 154,0 173,0 182,0 240,0 259,0 317,0 326,0 394,0 403,0 470,0 480,0 624,0 624,0 Weight approx. kg/km 68,0 88,0 98,0 116,0 149,0 186,0 199,0 245,0 292,0 306,0 366,0 384,0 451,0 521,0 590,0 625,0 744,0 758,0 917,0 933,0 1095,0 1125,0  Dimensions and specifications may be changed without prior notice. (RN01) N 29  Part no. 66862 66863 66864 66865 66866 66867 66868 66869 66870 66871 66872 66873 66874 66875 66876 66877 66878 66879 66880 66881 66882 66883 No.cores x cross-sec. mm² 2x1,32 3G1,32 4G1,32 5G1,32 7G1,32 9G1,32 10G1,32 12G1,32 15G1,32 16G1,32 18G1,32 19G1,32 25G1,32 27G1,32 33G1,32 34G1,32 41G1,32 42G1,32 49G1,32 50G1,32 61G1,32 65G1,32 AWG-No. Outer Ø approx. mm 16 7,5 16 7,8 16 8,5 16 9,3 16 10,1 16 11,7 16 12,4 16 12,9 16 15,0 16 15,2 16 15,9 16 16,0 16 18,6 16 19,0 16 20,4 16 20,5 16 23,4 16 24,1 16 25,5 16 25,6 16 27,2 16 28,5 Cop. weight kg/km 25,0 38,0 51,0 63,0 89,0 114,0 127,0 152,0 190,0 203,0 228,0 241,0 317,0 342,0 418,0 431,0 520,0 532,0 621,0 634,0 773,0 824,0 Weight approx. kg/km 80,0 86,0 115,0 126,0 171,0 237,0 259,0 301,0 379,0 405,0 443,0 458,0 564,0 629,0 758,0 775,0 967,0 972,0 1132,0 1137,0 1345,0 1376,0 TRAYCONTROL 600 flexible, oil-resistant, open installation (TC-ER), NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ PVC-power cable according to UL Standard 1277 Temperature range UL / CSA TC -40 °C to +90 °C UL / AWM -40 °C to +90 °C Ⴠ Nominal voltage TC 600 V AWM 1000 V WTTC 1000 V Ⴠ Test voltage 3000 V Ⴠ Minimum bending radius Approx. 5x cable ø Ⴠ Insulation resistance Min. 20 MOhm x km Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper conductor, fine wire stranded with AWG dimensions Ⴠ Special PVC core insulation with transparent nylon skin Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer, 3 cores and more Ⴠ Cores stranded in layers with optimal lay-lengths Ⴠ Separator Ⴠ Special PVC outer jacket Ⴠ Sheath colour -black (RAL 9005) Ⴠ With lenght marking in feet  Ⴠ Material self-extinguishing and flame retardant to UL-Standard in accordance CSA FT4 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Ⴠ UV-resistant Ⴠ Tests UL: TC-ER, PLTC-ER (AWG 18 - AWG 12), ITC-ER (AWG 18 - AWG 12), UL 1277, UL Type WTTC, UL TypeMTW,NFPA 79 2007, Oil Res I (Oil Res II also available), 90º C dry / 75º C wet  CSA: c(UL) CIC-TC FT4 CSA AWM I/II A/B FT4  Note Ⴠ G = with green-yellow earth core x = without earth core (OZ) Advantages Ⴠ TC-ER, Tray Cable Exposed Run Ⴠ simple Installation Ⴠ outstanding flexibility  Application USA NFPA79, edition 2007 conformant flexible power cables up to 600 V (WTTC 1000 V), for all machinery in tool and plant constuction, suitable for installation in dry, humid and damp environments, in the open and in pipes. For underground installation and for open, unprotected installation from the cable rack to machines and industrial plants. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 62902 62903 62904 62905 62906 62907 62908 62909 62910 62911 62912 62913 62914 62915 62916 62940 62917 62941 62918 62942 62919 62920 62970 62971 62972 62973 62974 62975 62976 62977  No.cores x cross-sec. mm² 2x1 3G1 4G1 5G1 7G1 9G1 10G1 12G1 15G1 16G1 18G1 19G1 25G1 27G1 34G1 34G1 37G1 40G1 41G1 41G1 50G1 61G1 2x6 3G6 4G6 5G6 7G6 9G6 12G6 19G6 AWG-No. Outer Ø approx. mm 18 7,0 18 7,1 18 8,0 18 8,6 18 9,3 18 10,7 18 11,6 18 11,9 18 13,2 18 13,3 18 14,6 18 14,7 18 17,0 18 17,4 18 19,3 16 20,5 18 19,8 16 22,9 18 20,7 16 23,4 18 23,5 18 24,9 10 11,9 10 12,6 10 14,7 10 16,0 10 17,4 10 20,4 10 23,9 10 27,9 Cop. weight kg/km 19,0 29,0 39,0 48,0 67,0 86,0 96,0 115,0 144,0 154,0 173,0 182,0 240,0 259,0 326,0 431,0 355,0 507,0 394,0 519,0 480,0 586,0 115,0 173,0 230,0 288,0 403,0 518,0 691,0 1094,0 Weight approx. kg/km 68,0 88,0 97,0 116,0 147,0 186,0 199,0 250,0 292,0 306,0 365,0 384,0 480,0 521,0 625,0 775,0 684,0 946,0 744,0 967,0 933,0 1095,0 213,0 283,0 387,0 473,0 607,0 771,0 1061,0 1528,0  Part no. 62978 62979 62980 62981 62982 62983 62984 62985 62986 62987 62988 62921 62922 62923 62924 62925 62926 62927 62928 62929 62930 62931 62932 62933 62934 62935 62936 62937 62938 62939 No.cores x cross-sec. mm² 4G10 5G10 3G16 4G16 5G16 3G25 4G25 5G25 3G35 4G35 5G35 2x1,32 3G1,32 4G1,32 5G1,32 6G1,32 7G1,32 8G1,32 9G1,32 10G1,32 12G1,32 14G1,32 15G1,32 16G1,32 18G1,32 19G1,32 20G1,32 25G1,32 27G1,32 30G1,32 AWG-No. Outer Ø approx. mm 8 19,7 8 21,7 6 19,5 6 21,9 6 24,0 4 24,3 4 27,1 4 29,3 2 27,9 2 31,4 2 34,0 16 7,5 16 7,8 16 8,5 16 9,3 16 10,0 16 10,1 16 10,9 16 11,7 16 12,4 16 12,9 16 14,5 16 15,0 16 15,2 16 15,9 16 16,0 16 16,5 16 18,6 16 19,0 16 19,6 Cop. weight kg/km 384,0 480,0 461,0 614,0 768,0 720,0 960,0 1200,0 1008,0 1344,0 1680,0 25,0 38,0 51,0 63,0 76,0 89,0 101,0 114,0 127,0 152,0 177,0 190,0 203,0 228,0 241,0 253,0 317,0 342,0 380,0 Weight approx. kg/km 615,0 768,0 700,0 907,0 1100,0 1061,0 1366,0 1631,0 1480,0 1922,0 2360,0 80,0 86,0 120,0 130,0 164,0 188,0 201,0 238,0 259,0 301,0 356,0 379,0 405,0 430,0 450,0 481,0 564,0 629,0 701,0  Continuation Ⴇ N 30 N TRAYCONTROL 600 flexible, oil-resistant, open installation (TC-ER), NFPA 79 Edition 2007   Part no. 62943 62944 62945 62946 62947 62948 62949 62950 62951 62952 62953 62954 62955 62956 62957 62958 62959 62960 No.cores x cross-sec. mm² 50G1,32 61G1,32 2x2,08 3G2,08 4G2,08 5G2,08 6G2,08 7G2,08 9G2,08 10G2,08 12G2,08 16G2,08 18G2,08 19G2,08 25G2,08 2x3,31 3G3,31 4G3,31 AWG-No. Outer Ø approx. mm 16 25,1 16 27,2 14 8,6 14 8,9 14 9,8 14 10,6 14 11,6 14 11,9 14 13,5 14 15,5 14 15,9 14 17,6 14 18,3 14 18,5 14 21,6 12 9,5 12 10,0 12 10,9 Cop. weight kg/km 634,0 773,0 40,0 60,0 80,0 100,0 120,0 140,0 180,0 200,0 240,0 319,0 359,0 380,0 500,0 63,0 95,0 127,0 Weight approx. kg/km 1137,0 1345,0 100,0 117,0 141,0 152,0 216,0 255,0 312,0 378,0 434,0 550,0 616,0 634,0 817,0 132,0 177,0 201,0  Part no. 62961 62962 62963 62964 62965 62966 62967 62968 62969 62989 62990 62991 62992 62993 62994 62995 62996 No.cores x cross-sec. mm² 5G3,31 6G3,31 7G3,31 9G3,31 12G3,31 16G3,31 19G3,31 20G3,31 25G3,31 4G42,3 4G52,9 4G67,3 4G84,4 4G106,7 4G128,4 4G181,9 4G257,6 AWG-No. Outer Ø approx. mm 12 11,9 12 13,0 12 13,1 12 15,9 12 17,8 12 19,8 12 20,8 12 21,9 12 25,3 1 34,8 1/0 37,9 2/0 41,3 3/0 48,6 4/0 51,2 250 kcmil 55,0 350 kcmil 63,5 500 kcmil 73,7 Cop. weight kg/km 159,0 191,0 222,0 286,0 381,0 508,0 604,0 636,0 794,0 1624,0 2031,0 2584,0 3256,0 4097,0 4931,0 6985,0 9892,0  Dimensions and specifications may be changed without prior notice. (RN01) Bundling, binding, fastening Plastic helix Cable tie Hook and loop cable tie Mounting block You can find bundling, binding, fastening in our catalogue Cable Accessories. Request it now at www.helukabel.de N 31 Weight approx. kg/km 274,0 315,0 353,0 476,0 613,0 783,0 918,0 916,0 1286,0 2397,0 2938,0 3569,0 4181,0 5747,0 7591,0 8299,0 11549,0 TRAYCONTROL 670 HDP / 670-C HDP flexible, oil-resistant, open installation (TC-ER), NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ TPE motor supply cable according to UL 1277 Ⴠ Temperature range Flexing -40ºC bis +105ºC Ⴠ Nominal voltage TC 600 V AWM 1000 V TC Wind Turbine (WTTC) 1000 V Ⴠ Test voltage 4000 V Ⴠ Minimum bending radius 7,5 cable ø Ⴠ Coupling resistance (-C-type) Max. 250 Ohm/km Ⴠ Tinned copper conductor, fine wire stranded with AWG measures Ⴠ Special PVC core insulation with transparent nylon skin Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer Ⴠ Cores stranded in layers with optimal lay-lenghts Ⴠ Separator Ⴠ Special TPE outer jacket Ⴠ Sheath colour orange (RAL 2003) Ⴠ With length marking in feet Ⴠ C-Type Screening with braid of tinned copper wires, optimal coverage, approx. 85%  Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Tests UL: TC-ER, WTTC, MTW, NFPA 79 2007, UL 1277, UL AWM 105ºC, OIL RES I & II, 75º C wet Bus Drop Cable Class I Div 2 per NEC Art. 336, 318, 501 CSA: c (UL) CIC-TC FT4, AWM I/II A/B FT4  Note Ⴠ HDP =Heavy Duty Power   Application HELUKABEL TRAYCONTROL 670 HDP / 670-C-HDP are multi-conductor severe duty motor supply cables with Bus Drop, UL TC-ER and CSA CIC/TC approval. Superior oil performance for long cable life and permitted to be used in hazardous (classified) locations Class I Div 2 per NEC 336, 318 and 501. Special extruded jacket and fine copper stranding approved for exposed run, pipes and burial installation. Excellent flexibility and easier to pull than standard tray cables. Suitable for installation in dry, humid and damp environments, in the open unprotected installation from the cable tray to machines. Recommended Applications: Motor connections in industrial and automation environments, machine tool, automotive and renewable energies = The product conforms to EC Low-Voltage Directive 2006/95/EG  TRAYCONTROL 670 HDP Part no. 66820 66821 66822 66823 66824 66825 66826 66827 66828 No.cores x cross-sec. mm² 4x1 4G1,32 4G2,08 4G3,31 4G6 4G10 4G16 4G25 4G35 AWG-No. Outer Ø approx. mm 18 8,4 16 9,2 14 10,0 12 11,2 10 15,2 8 19,3 6 22,4 4 26,7 2 31,5  Cop. weight kg/km 39,0 51,0 80,0 127,0 230,0 384,0 614,0 960,0 1344,0 Weight approx. kg/km 103,0 133,0 170,0 229,0 393,0 626,0 885,0 1301,0 1983,0 TRAYCONTROL 670-C HDP Part no. 66829 66830 66831 66832 66833 66834 66835 66836 66837 No.cores x cross-sec. mm² 4x1 4G1,32 4G2,08 4G3,31 4G6 4G10 4G16 4G25 4G35 AWG-No. Outer Ø approx. mm 18 9,8 16 10,5 14 11,7 12 12,8 10 16,9 8 22,1 6 26,2 4 30,8 2 35,0 Cop. weight kg/km 52,0 72,0 115,0 179,0 256,0 426,0 657,0 1026,0 1412,0 Weight approx. kg/km 133,0 159,0 222,0 283,0 460,0 741,0 1059,0 1497,0 2058,0  Dimensions and specifications may be changed without prior notice. (RN01) N 32 N JZ 604-FCY TC TRAY CABLE PVC power cable, exposed run, screened, NFPA 79 Edition 2007, 90°C, 600V, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ PVC power cable, screened toUL-standard1277 TRAY CABLE Ⴠ Multinorm AWM-Style2587 to UL-Std.758 and CSA C22.2 No210.2 I/II A/B90 °C 600V Ⴠ Temperature range dry environment flexing -5 °C to +90 °C fixed installation -25 °C to +90 °C wet environment flexing -5 °C to +75 °C fixed installation -25 °C to +75 °C Ⴠ Nominal voltage to UL 600 V Ⴠ Test voltage 3000 V Ⴠ Breakdown voltage min. 6000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius 10x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, fine wire conductors, according to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Spezial PVC core insulation class12B to table50.155 UL-standard1581, type TFF to UL-Std.66 (AWG 20-AWG 16), type THHW to UL-Std. 83 (ุ AWG 14) Ⴠ Black cores with continuous white numbering according to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal lay-lenght Ⴠ Special separation foil Ⴠ Tinned copper braided screening, approx. 85% coverage Ⴠ Special PVC outer sheath, to UL-Std.1277 table11.2 Ⴠ Sheath colour black (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ Material self-extinguishing and flame retardant to CSA FT4 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. Ⴠ unscreened analogue type: JZ 604 TC TRAY CABLE, see page N 25  Application USA NFPA79, edition 2007 conformant flexible power cables up to 600 V, for all machinery in tool and plant constuction, suitable for installation in dry, humid and damp environments, in the open and in pipes. For underground installation and for open, unprotected installation from the cable rack to machines and industrial plants. EMC = Electromagnetic compatibillity = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 69750 69751 69752 69753 69754 69755 69756 69757 69758 69759 69760 69761 69762 69763 69764 69765 69766 69767 69768 69769 69770 69771 69772 69773 69774 69775 69776 69777 69778 69779  No.cores x cross-sec. mm² 2x1 3G1 4G1 5G1 7G1 9G1 10G1 12G1 18G1 25G1 34G1 50G1 2x1,5 3G1,5 4G1,5 5G1,5 7G1,5 8G1,5 9G1,5 10G1,5 12G1,5 16G1,5 18G1,5 25G1,5 34G1,5 41G1,5 50G1,5 61G1,5 2x2,5 3G2,5 AWG-No. Outer Ø approx. mm 18 8,6 18 9,0 18 9,7 18 10,5 18 12,2 18 13,2 18 15,0 18 15,4 18 17,8 18 21,9 18 24,5 18 26,2 16 9,0 16 9,4 16 10,2 16 11,1 16 12,9 16 14,5 16 14,5 16 15,8 16 16,2 16 17,9 16 18,9 16 22,3 16 24,9 16 26,7 16 33,7 16 36,0 14 10,0 14 10,5 Cop. weight kg/km 50,0 60,0 71,0 88,0 111,0 139,0 150,0 184,0 260,0 349,0 486,0 625,0 63,0 80,0 97,0 119,0 147,0 170,0 182,0 193,0 267,0 315,0 374,0 526,0 629,0 801,0 885,0 1100,0 96,0 144,0 Weight approx. kg/km 151,0 164,0 200,0 229,0 306,0 371,0 411,0 460,0 624,0 845,0 984,0 1096,0 161,0 181,0 240,0 274,0 367,0 431,0 437,0 511,0 598,0 630,0 787,0 1240,0 1401,0 2671,0 3614,0 4089,0 269,0 294,0  Dimensions and specifications may be changed without prior notice. (RN01) N 33  Part no. 69780 69781 69782 69783 69784 69785 69786 69787 69788 69789 69790 69791 69792 69793 69794 69795 69796 69797 69798 69799 69800 69801 69802 69803 No.cores x cross-sec. mm² 4G2,5 5G2,5 7G2,5 8G2,5 9G2,5 10G2,5 12G2,5 18G2,5 25G2,5 3G4 4G4 5G4 7G4 9G4 12G4 18G4 3G6 4G6 5G6 7G6 3G10 4G10 5G10 7G10 AWG-No. Outer Ø approx. mm 14 11,4 14 12,4 14 15,3 14 16,5 14 16,5 14 17,9 14 18,4 14 22,4 14 26,5 12 11,6 12 12,6 12 14,5 12 17,1 12 18,4 12 20,5 12 25,0 10 13,8 10 15,1 10 16,4 10 18,0 8 17,6 8 19,3 8 22,1 8 24,2 Cop. weight kg/km 148,0 181,0 255,0 285,0 309,0 340,0 441,0 570,0 738,0 174,0 230,0 273,0 316,0 402,0 507,0 751,0 240,0 305,0 439,0 505,0 350,0 535,0 592,0 810,0 Weight approx. kg/km 341,0 420,0 551,0 583,0 593,0 631,0 847,0 1336,0 1921,0 381,0 504,0 692,0 908,0 1104,0 1497,0 2104,0 623,0 729,0 1082,0 1414,0 1108,0 1324,0 1596,0 2186,0 JZ 604-YCY TC TRAY CABLE PVC power cable, exposed run, screened, NFPA 79 Edition 2007, 90°C, 600V, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ PVC power cable, screened to UL-standard1277 TRAY CABLE Ⴠ Multinorm also conforms to the following standards: AWM-Style2587 to UL-Std.758 (cUL) and CSA type TC FT4 toC22.2 no230, CSA C22.2 No210.2 I/II A/B90 °C 600V FT4 Ⴠ Temperature range dry environment flexing -5 °C to +90 °C fixed installation -25 °C to +90 °C wet environment flexing -5 °C to +75 °C fixed installation -25 °C to +75 °C Ⴠ Nominal voltage to UL 600 V Ⴠ Test voltage 3000 V Ⴠ Breakdown voltage min. 6000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius 10x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, fine wire conductors, according to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Spezial PVC core insulation class 12B to table50.155 UL-standard1581, type TFF to UL-Std.66 (AWG 20-AWG 16), type THHW to UL-Std.83 (ุAWG 14) Ⴠ Black cores with continuous white numbering according to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal lay-lenght Ⴠ PVC-inner sheath, to UL-Std.1277 table11.2 Ⴠ Tinned copper braided screening, approx. 85% coverage Ⴠ Special PVC outer sheath, to UL-Std.1277 table11.2, Ⴠ Sheath colour black (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ Material self-extinguishing and flame retardant to CSA FT4 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ unscreened analogue type: JZ 604 TC TRAY CABLE, see page N 25  Application UL-approved, flexible high current cables for use up to 600 V, for all machines, tools and installation work. Suitable for use in dry, damp and wet areas, outside, in cable ducts, open cable trays. Also in pipes, in the ground and for open installation in machinery and industrial areas. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 69804 69805 69806 69807 69808 69809 69810 69811 69812 69813 69814 69815 69816 69817 69818 69819 69820 69821  No.cores x cross-sec. mm² 3G16 4G16 5G16 7G16 3G25 4G25 5G25 7G25 3G35 4G35 5G35 3G50 4G50 5G50 3G70 4G70 5G70 3G95 AWG-No. Outer Ø approx. mm 6 25,2 6 27,8 6 31,2 6 34,5 4 29,0 4 32,4 4 34,2 4 40,3 2 32,4 2 36,2 2 40,5 1 40,4 1 45,5 1 50,0 2/0 47,1 2/0 51,1 2/0 56,0 3/0 50,1 Cop. weight kg/km 653,0 807,0 940,0 1345,0 920,0 1169,0 1420,0 1921,0 1250,0 1680,0 2020,0 1887,0 2370,0 2880,0 2516,0 3257,0 4032,0 3086,0 Weight approx. kg/km 1385,0 1861,0 2614,0 3211,0 2455,0 2721,0 3490,0 4960,0 3130,0 4100,0 4921,0 4560,0 5761,0 7186,0 5580,0 7387,0 9290,0 8520,0  Part no. 69822 69823 69824 69825 69826 No.cores x cross-sec. mm² 4G95 5G95 3G120 4G120 5G120 AWG-No. Outer Ø approx. mm 3/0 55,0 3/0 60,5 4/0 54,0 4/0 59,5 4/0 64,5 Cop. weight kg/km 4060,0 5244,0 4176,0 5231,0 6624,0 Weight approx. kg/km 10200,0 13800,0 11090,0 13620,0 15420,0  Dimensions and specifications may be changed without prior notice. (RN01) N 34 N TRAYCONTROL 500-C flexible, oil-resistant, screened, EMC-preferred type, open installation TC-ER, PLTC-ER, ITC-ER, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ PVC control cable according to UL Standard 1277 Ⴠ Temperature range Flexing -5 °C to +90 °C Fixed installation -40 °C to +90 °C Ⴠ Nominal voltage TC 600 V AWM 1000 V TC Wind Turbine (WTTC) 1000 V Ⴠ Test voltage 3000 V Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Minimum bending radius Flexing 6x cable ø Ⴠ Insulation resistance Min. 20 MOhm x km Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad)  Ⴠ Bare copper conductor, fine wire stranded Ⴠ Special PVC core insulation with transparent nylon skin Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer, 3 cores and more Ⴠ Cores stranded in layers with optimal lay-lengths Ⴠ Separating foil Ⴠ Braided screening of tinnedcopper wires, coverage approx. 85% Ⴠ Separator Ⴠ Special PVC outer jacket Ⴠ Sheath colour - grey (RAL 7001) Ⴠ With lenght marking in feet  Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Tests UL: TC-ER, PLTC-ER (AWG 18 - AWG 12), ITC-ER (AWG 18 - AWG 12), MTW, NFPA 79 2007, WTTC 1000V, DP-1, OIL RES I & II, 90°C dry / 75 °C wet, Class 1 Div. 2 per NEC Art 336, 392, 501, crush impact test in accordance with UL 1277 CSA: c(UL) CIC-TC FT4, CSA AWM I/II A/B FT4  Note Advantages Ⴠ Highly-flexible, easy to install Available on request Ⴠ withblue cores(DC) Ⴠ with red cores(AC) Ⴠ Black or TPE outer sheath  Application HELUKABEL TRAYCONTROL 500-Cis a flexible, screened and oil-resistant control cable. The special combination of TC-ER, PLTC-ER and ITC-ER allows this cable to be used as a connecting cable for industrial plant and machinery in accordance with NFPA 79 2007. Approved for open, unprotected installation in cable trays to the machine. Its outstandingoil resistance (OIL RES I& II) guarantees a long servicelife for industrial applications in dry, damp and wet environments. Recommendedapplications: production lines, bottling plants, machine construction, switch cabinets, conveyor systems, packaging machines, automotive industry. EMC= Electromagnetic compatibility. To optimise EMC characteristics, we recommend a large contact area for the copper braiding around the entire circumference on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 62813 62814 62815 62816 62817 62818 62819 62820 62821 62822 62823 62824 62825 62826 62827 62828 62829 62830 62831 62832 62833 62834 62835 62836 62837 62838 62839 62840  No.cores x cross-sec. mm² 2x0,5 3G0,5 7G0,5 12G0,5 25G0,5 2x1 3G1 4G1 5G1 7G1 9G1 10G1 12G1 15G1 18G1 19G1 25G1 3G1,5 4G1,5 5G1,5 6G1,5 7G1,5 9G1,5 10G1,5 12G1,5 15G1,5 18G1,5 19G1,5 AWG-No. Outer Ø approx. mm 20 7,0 20 7,6 20 9,4 20 11,0 20 16,1 18 8,1 18 8,2 18 8,8 18 9,4 18 10,1 18 11,4 18 11,6 18 12,9 18 14,8 18 15,7 18 15,7 18 17,7 16 8,9 16 9,6 16 10,3 16 10,5 16 11,3 16 12,6 16 12,9 16 15,1 16 16,4 16 17,3 16 17,6 Cop. weight kg/km 35,0 42,0 69,0 108,0 240,0 50,0 60,0 71,0 88,0 111,0 140,0 150,0 184,0 207,0 260,0 280,0 349,0 74,0 90,0 104,0 120,0 134,0 165,0 180,0 244,0 270,0 319,0 327,0 Weight approx. kg/km 95,0 115,0 164,0 266,0 435,0 110,0 118,0 136,0 148,0 192,0 244,0 283,0 329,0 377,0 435,0 443,0 571,0 144,0 172,0 188,0 203,0 244,0 308,0 346,0 423,0 441,0 512,0 503,0  Part no. 62841 62842 62843 62844 62845 62846 62847 62848 62849 62850 62851 62852 62853 62854 62855 62856 62857 62858 62859 62860 62861 62862 62863 62864 62865 62866 62867 62868 No.cores x cross-sec. mm² 20G1,5 25G1,5 3G2,08 4G2,08 5G2,08 7G0,5 9G2,08 10G2,08 12G2,08 15G2,08 18G2,08 19G2,08 25G2,08 3G3,31 4G3,31 5G3,31 6G3,31 7G3,31 9G3,31 12G3,31 15G3,31 19G3,31 20G3,31 25G3,31 3G6 4G6 5G6 7G6 AWG-No. Outer Ø approx. mm 16 17,5 16 19,6 14 9,8 14 10,7 14 11,6 14 12,5 14 15,0 14 16,3 14 16,9 14 18,3 14 19,5 14 19,7 14 23,3 12 11,4 12 12,5 12 14,4 12 14,6 12 15,5 12 17,7 12 19,7 12 21,0 12 23,1 12 25,0 12 27,1 10 14,1 10 15,5 10 16,8 10 18,2 Cop. weight kg/km 340,0 434,0 112,0 121,0 150,0 200,0 240,0 264,0 350,0 409,0 471,0 505,0 652,0 137,0 169,0 201,0 236,0 262,0 334,0 434,0 531,0 720,0 764,0 914,0 240,0 305,0 399,0 505,0 Weight approx. kg/km 524,0 704,0 179,0 222,0 266,0 326,0 435,0 427,0 592,0 635,0 780,0 799,0 1042,0 237,0 314,0 386,0 425,0 496,0 740,0 887,0 903,0 1123,0 1490,0 1865,0 389,0 549,0 610,0 851,0  Continuation Ⴇ N 35 TRAYCONTROL 500-C flexible, oil-resistant, screened, EMC-preferred type, open installation TC-ER, PLTC-ER, ITC-ER, NFPA 79 Edition 2007   Part no. 62869 62870 62871 62872 No.cores x cross-sec. mm² 9G6 12G6 19G6 4G10 AWG-No. Outer Ø approx. mm 10 20,9 10 24,4 10 27,5 8 18,7 Cop. weight kg/km 704,0 940,0 1210,0 535,0 Weight approx. kg/km 1132,0 1523,0 1952,0 852,0  Part no. 62873 62874 62875 No.cores x cross-sec. mm² 4G16 4G25 4G35 AWG-No. Outer Ø approx. mm 6 23,3 4 28,6 2 33,2 Cop. weight kg/km 740,0 1140,0 1576,0 Weight approx. kg/km 1202,0 1971,0 2887,0  Dimensions and specifications may be changed without prior notice. (RN01) Marking Marking rings Cable marker Indian pen N You can find marking in our catalogue Cable Accessories. Request it now at www.helukabel.de N 36 TRAYCONTROL 600-C flexible, oil-resistant, screened, EMC-preferred type, open installation (TC-ER), NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ PVCpower cable according to UL 1277 Ⴠ Temperature range UL / CSA TC -40 °C to +90 °C UL / AWM -40 °C to +90 °C Ⴠ Nominal voltage TC 600 V AWM 1000 V WTTC 1000 V Ⴠ Test voltage 3000 V Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Minimum bending radius approx. 6x cable ø Ⴠ Insulation resistance Min. 20 MOhm x km Ⴠ Radiation resistance Up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper conductor, fine wire stranded with AWG dimensions Ⴠ Special PVC core insulation with transparent nylon skin Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer, 3 cores and more Ⴠ Cores stranded in layers with optimal lay-lengths Ⴠ Separating foil Ⴠ Braided screening of tinned copper wires, coverage approx. 85% Ⴠ Separator Ⴠ Special PVC outer jacket Ⴠ Sheath colour -black (RAL 9005) Ⴠ With lenght marking in feet Ⴠ Self-extinguishing and flame retardant materialin accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Ⴠ UV-resistant Ⴠ Tests UL: TC-ER, PLTC-ER (AWG 18 - AWG 12), ITC-ER (AWG 18 - AWG 12), UL 1277, UL Type WTTC, UL Type MTW NFPA 79 2007, Oil Res I (Oil Res II also available), 90 ° C dry / 75 ° C wet CSA: c (UL) CIC-TC FT4, CSA AWM I/II A/B FT4  Note Ⴠ G = with green-yellow earth core X =without earth core(OZ) Advantages Ⴠ TC-ER, Tray Cable Exposed Run Ⴠ Simple installation Ⴠ Outstanding flexibility  Application USANFPA 79, Edition 2007 compliant, screened, flexible power cable to 600 V (WTTC 1000 V), for all tool and plant construction machinery, suitable for installation in dry, damp and wet environments, outdoors and in pipes. For underground installation and for open, unprotected installtion from the cable tray to the machine and industrial plants. EMC = Electromagnetic compatibillity. To optimise EMC characteristics, we recommend a large contact area for the copper braiding around the entire circumference on both ends. = The productconforms to the EC Low-Voltage Directive 2006/95/EG.   Part no. 63049 63050 63051 63052 63053 63054 63055 62997 63056 63057 63058 63059 63060 63061 63062 63063  No.cores x cross-sec. mm² 3G1 4G1 5G1 7G1 12G1 18G1 25G1 3G1,32 4G1,32 5G1,32 7G1,32 12G1,32 18G1,32 25G1,32 3G2,08 4G2,08 AWG-No. Outer Ø approx. mm 18 8,2 18 8,8 18 9,4 18 10,1 18 12,9 18 15,7 18 17,7 16 8,9 16 9,6 16 10,3 16 11,3 16 15,1 16 17,3 16 19,6 14 9,8 14 10,7 Cop. weight kg/km 31,0 52,0 62,0 83,0 143,0 207,0 284,0 57,0 72,0 84,0 124,0 199,0 290,0 384,0 85,0 115,0 Weight approx. kg/km 118,0 136,0 149,0 193,0 328,0 431,0 569,0 144,0 172,0 186,0 243,0 421,0 510,0 704,0 178,0 220,0  Dimensions and specifications may be changed without prior notice. (RN01) N 37  Part no. 63064 63065 63066 63067 63068 63069 63070 63071 63072 63073 63074 63075 63076 63077 63078 No.cores x cross-sec. mm² 5G2,08 7G2,08 12G2,08 18G2,08 25G2,08 4G3,31 5G3,31 7G3,31 4G6 5G6 7G6 4G10 4G16 4G25 4G35 AWG-No. Outer Ø approx. mm 14 11,6 14 12,5 14 16,9 14 19,5 14 23,3 12 12,5 12 14,4 12 15,5 10 15,5 10 16,8 10 18,2 8 18,7 6 23,3 4 28,6 2 33,2 Cop. weight kg/km 139,0 185,0 309,0 448,0 632,0 179,0 223,0 298,0 256,0 312,0 430,0 426,0 657,0 1026,0 1412,0 Weight approx. kg/km 264,0 325,0 591,0 780,0 1041,0 313,0 384,0 492,0 547,0 608,0 850,0 851,0 1197,0 1970,0 2874,0 TRAYCONTROL 300 flexible, oil-resistant, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ Flexible PVC data and control cable Ⴠ Temperature range -25 °Cto +105 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage2000 V Ⴠ Minimum bending radius Flexing 4x cable ø Ⴠ Tinned copper conductor, fine wire stranded, with AWG measures Ⴠ Special PVC core insulation (AWG 22 - AWG 16 with transparent nylon skin) Core identification according to international colour code Ⴠ Cores stranded in layers with optimal lay-lengths Ⴠ Separator Ⴠ Special PVC outer sheath Ⴠ Sheath colour - grey (RAL 7001) Ⴠ With length marking in feet Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Ⴠ Tests UL(AWG 22 - AWG 16): PLTC-ER, ITC-ER, Type CM, NFPA 79 2007, OIL RES I & II, Class I Div. 2, NEC Art. 501, 725, 760 & 800, AWM 2464 UL (AWG 24 - AWG 28):CM, AWM 2464, rated OIL RES I & II, NEC Art. 725, 760 & 800, NFPA 79 2007 CSA: CSA CMG FT4, AWM I/II A/B  Note Advantages Ⴠ highly-flexible easy to install Ⴠ Oil-resistant to OIL RES I & II Available on request Ⴠ PUR or TPE outer sheath Ⴠ Sheath colour to suit customer requirements  Application HELUKABEL® TRAYCONTROL 300 is a multi-core PVC data and control cable. Cross-sections with PLTC-ER and ITC-ER approval suitable for open, unprotected installation in cable trays to the machine; their outstanding oil resistance (OIL RES I & II) makes them ideally suited as connecting and joining cables and also for control, signal and measuring systems in industrial plants. The flexible cable structure facilitates installation inside and outside of machines and switch cabinets. Applications: tool machines, control panels, control and instrumentation technology, production automation, cable ducts, renewable energies. = The product conforms to the EG Low-Voltage Directive 2006/95/EG   Part no. 62625 62626 62627 62628 62629 62630 62631 62632 62633 62634 62635 62636 62637 62638 62639 62640 62641 62642 62643 62644 62645 62646 62647 62648 62649 62650 62651 62652 62653 62654  No.cores x cross-sec. mm² 2x0,08 3x0,08 4x0,08 6x0,08 8x0,08 10x0,08 15x0,08 20x0,08 25x0,08 30x0,08 40x0,08 50x0,08 2x0,14 3x0,14 4x0,14 6x0,14 8x0,14 10x0,14 15x0,14 20x0,14 25x0,14 30x0,14 40x0,14 50x0,14 2x0,25 3x0,25 4x0,25 6x0,25 8x0,25 10x0,25 AWG-No. Outer Ø approx. mm 28 3,7 28 4,0 28 4,2 28 4,7 28 5,0 28 5,6 28 6,2 28 6,8 28 7,8 28 8,2 28 8,9 28 9,9 26 4,0 26 4,1 26 4,3 26 5,0 26 5,3 26 6,0 26 6,6 26 7,5 26 8,3 26 8,6 26 9,4 26 10,6 24 4,2 24 4,4 24 4,7 24 5,4 24 5,7 24 6,4 Cop. weight kg/km 1,6 2,0 3,0 5,0 6,0 8,0 12,0 15,0 19,0 23,0 31,0 38,0 3,0 4,0 5,0 8,0 11,0 13,0 20,0 27,0 34,0 40,0 54,0 67,0 5,0 7,0 10,0 14,0 19,0 24,0 Weight approx. kg/km 12,0 18,0 21,0 27,0 30,0 30,0 43,0 54,0 63,0 73,0 89,0 109,0 18,0 21,0 24,0 30,0 34,0 42,0 52,0 67,0 80,0 92,0 116,0 145,0 19,0 22,0 27,0 33,0 42,0 49,0  Part no. 62655 62656 62657 62658 62659 62660 62661 62662 62663 62664 62665 62666 62667 62668 62669 62670 62671 62672 62673 62674 62675 62676 62677 62678 62679 62680 62681 62682 62683 62684 No.cores x cross-sec. mm² 15x0,25 20x0,25 25x0,25 30x0,25 40x0,25 50x0,25 2x0,34 3x0,34 4x0,34 6x0,34 8x0,34 10x0,34 15x0,34 20x0,34 25x0,34 30x0,34 40x0,34 50x0,34 2x0,75 3x0,75 4x0,75 6x0,75 8x0,75 10x0,75 15x0,75 20x0,75 25x0,75 30x0,75 40x0,75 50x0,75 AWG-No. Outer Ø approx. mm 24 7,2 24 8,2 24 9,1 24 9,4 24 11,0 24 12,2 22 4,6 22 4,8 22 5,1 22 5,8 22 6,2 22 7,3 22 8,3 22 9,1 22 10,5 22 10,9 22 12,1 22 13,5 20 5,7 20 6,0 20 6,5 20 7,8 20 8,4 20 9,6 20 11,4 20 12,7 20 14,1 20 14,7 20 16,9 20 18,9 Cop. weight kg/km 36,0 48,0 60,0 72,0 96,0 120,0 7,0 10,0 13,0 20,0 26,0 33,0 49,0 65,0 82,0 98,0 131,0 163,0 14,0 22,0 29,0 43,0 58,0 72,0 108,0 144,0 180,0 216,0 288,0 360,0 Weight approx. kg/km 69,0 86,0 103,0 131,0 173,0 219,0 22,0 28,0 32,0 46,0 54,0 66,0 90,0 115,0 141,0 176,0 234,0 293,0 57,0 60,0 73,0 97,0 133,0 143,0 177,0 261,0 353,0 419,0 562,0 699,0  Continuation Ⴇ N 38 N TRAYCONTROL 300 flexible, oil-resistant, NFPA 79 Edition 2007   Part no. 62685 62686 62687 62688 62700 62689 62702 62690 62691 62692 62693 62694 No.cores x cross-sec. mm² 2x1 3x1 4x1 6x1 6x1 8x1 8x1 10x1 15x1 20x1 25x1 30x1 AWG-No. Outer Ø approx. mm 18 6,2 18 6,5 18 7,3 18 8,5 16 9,3 18 9,1 16 10,6 18 11,1 18 12,6 18 13,9 18 16,6 18 16,7 Cop. weight kg/km 19,0 29,0 38,0 58,0 86,0 77,0 115,0 96,0 144,0 192,0 240,0 288,0 Weight approx. kg/km 61,0 64,0 77,0 101,0 162,0 142,0 243,0 195,0 247,0 328,0 407,0 539,0  Part no. 62695 62696 62697 62698 62699 62703 62704 62705 62706 62707 62708 62709 No.cores x cross-sec. mm² 40x1 50x1 2x1,5 3x1,5 4x1,5 10x1,5 15x1,5 20x1,5 25x1,5 30x1,5 40x1,5 50x1,5 AWG-No. Outer Ø approx. mm 18 18,5 18 20,8 16 6,7 16 7,4 16 8,0 16 12,2 16 13,9 16 15,3 16 17,7 16 18,4 16 20,5 16 23,1 Cop. weight kg/km 384,0 480,0 28,0 43,0 58,0 144,0 216,0 288,0 360,0 432,0 576,0 720,0  Dimensions and specifications may be changed without prior notice. (RN02) Core end sleeves and cable lugs Core end sleeves Solderless terminals Tubular cable lugs Compression joints You can find core end sleeves and cable lugs in our catalogue Cable Accessories. Request it now at www.helukabel.de N 39 Weight approx. kg/km 717,0 894,0 83,0 91,0 109,0 267,0 364,0 493,0 608,0 729,0 967,0 1214,0 TRAYCONTROL 300-C flexible, oil-resistant, screened, EMC-preferred type, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ Flexible screened PVC data and control cable  Ⴠ Temperature range -25 °Cto +105 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage 2000 V Ⴠ Minimum bending radius Flexing 6x cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Tinned copper conductor, fine wire stranded, with AWG measures Ⴠ Special PVC core insulation (AWG 22 - AWG 16 with transparent nylon skin) Ⴠ Core identification according to international colour code Ⴠ Cores stranded in layers with optimal lay-lengths Ⴠ 1. Screening with special aluminium foil Ⴠ 2. Screening with braid of tinned copper wires, optimal coverage, approx. 85% Ⴠ Separator Ⴠ Special PVC outer sheath Ⴠ Sheath colour - grey (RAL 7001) Ⴠ With length marking in feet Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Ⴠ Tests UL (AWG 22 - AWG 16): PLTC-ER, ITC-ER, Type CM, NFPA 79 2007, OIL RES I & II, Class I Div. 2, NEC Art. 501, 725, 760 & 800, AWM 2464 UL (AWG 24 - AWG 28): CM, AWM 2464, rated OIL RES I & II, NEC Art. 725, 760 & 800, NFPA 79 2007 CSA: CSA CMG FT4, AWM I/II A/B  Note Advantages Ⴠ Highly-flexible, easy to install Ⴠ Oil-resistant to OIL RES I & II Available on request Ⴠ PUR or TPE outer sheath Ⴠ Sheath colour to suit customer requirement  Application HELUKABEL® TRAYCONTROL 300 is a screened,multi-core PVC data and control cable. Cross-sections with PLTC-ER and ITC-ER approval suitable for open, unprotected installation in cable trays to the machine; their outstanding oil resistance (OIL RES I & II) makes them ideally suited as connecting and joining cables and also for control, signal and measuring systems in industrial plants. The flexible cable structure facilitates installation inside and outside of machines and switch cabinets. The double-screening with aluminium foil (100%coverage) andcopper braid (approx. 85% coverage) guarantee superior EMC protection.  Applications: tool machines, control panels, measuring devices, production automation, cable ducts, renewable energies.  EMC = Electromagnetic compatibility. To optimise EMC characteristics, we recommend a large contact area for the copper braiding around the entire circumference on both ends. = The product conforms to the EG Low-Voltage Directive 2006/95/EG   Part no. 62710 62711 62712 62713 62714 62715 62716 62717 62718 62719 62720 62721 62722 62723 62724 62725 62726 62727 62728 62729 62730 62731 62732 62733 62734 62735 62736 62737  No.cores x cross-sec. mm² 2x0,08 3x0,08 4x0,08 6x0,08 8x0,08 10x0,08 15x0,08 20x0,08 25x0,08 30x0,08 40x0,08 50x0,08 2x0,14 3x0,14 4x0,14 6x0,14 8x0,14 10x0,14 15x0,14 20x0,14 25x0,14 30x0,14 40x0,14 50x0,14 2x0,25 3x0,25 4x0,25 6x0,25 AWG-No. Outer Ø approx. mm 28 4,4 28 4,6 28 4,9 28 5,4 28 5,7 28 6,3 28 6,9 28 7,5 28 8,5 28 8,8 28 9,6 28 11,3 26 4,6 26 4,8 26 5,0 26 5,6 26 5,9 26 6,6 26 7,3 26 8,1 26 9,0 26 9,3 26 10,2 26 11,9 24 4,9 24 5,1 24 5,3 24 6,0 Cop. weight kg/km 6,0 7,0 9,0 12,0 15,0 18,0 24,0 30,0 37,0 43,0 54,0 67,0 9,0 10,0 12,0 16,0 19,0 24,0 31,0 40,0 49,0 57,0 72,0 88,0 15,0 16,0 19,0 27,0 Weight approx. kg/km 16,0 22,0 27,0 34,0 37,0 43,0 52,0 67,0 79,0 88,0 112,0 131,0 24,0 27,0 31,0 39,0 43,0 51,0 66,0 79,0 92,0 110,0 136,0 165,0 30,0 33,0 37,0 48,0  Part no. 62738 62739 62740 62741 62742 62743 62744 62745 62746 62747 62748 62749 62750 62751 62752 62753 62754 62755 62756 62757 62758 62759 62760 62761 62762 62763 62764 62765 No.cores x cross-sec. mm² 8x0,25 10x0,25 15x0,25 20x0,25 25x0,25 30x0,25 40x0,25 50x0,25 2x0,34 3x0,34 4x0,34 6x0,34 8x0,34 10x0,34 15x0,34 20x0,34 25x0,34 30x0,34 40x0,34 50x0,34 2x0,75 3x0,75 4x0,75 6x0,75 8x0,75 10x0,75 15x0,75 20x0,75 AWG-No. Outer Ø approx. mm 24 6,3 24 7,1 24 8,2 24 8,9 24 9,8 24 10,1 24 11,2 24 13,0 22 5,3 22 5,5 22 5,8 22 6,5 22 6,9 22 8,1 22 9,0 22 9,7 22 11,4 22 11,8 22 12,9 22 14,3 20 6,4 20 6,7 20 7,2 20 8,6 20 9,1 20 10,4 20 12,3 20 13,6 Cop. weight kg/km 31,0 39,0 51,0 64,0 77,0 92,0 118,0 148,0 19,0 22,0 27,0 34,0 45,0 69,0 77,0 92,0 121,0 139,0 177,0 215,0 28,0 34,0 40,0 54,0 70,0 83,0 119,0 130,0 Weight approx. kg/km 57,0 67,0 85,0 106,0 128,0 155,0 206,0 249,0 34,0 40,0 46,0 60,0 72,0 85,0 115,0 140,0 176,0 210,0 273,0 331,0 73,0 77,0 91,0 118,0 158,0 173,0 218,0 298,0  Continuation Ⴇ N 40 N TRAYCONTROL 300-C flexible, oil-resistant, screened, EMC-preferred type, NFPA 79 Edition 2007   Part no. 62766 62767 62768 62769 62770 62771 62772 62773 62774 62775 62776 62777 62778 62779 No.cores x cross-sec. mm² 25x0,75 30x0,75 40x0,75 50x0,75 2x1 3x1 4x1 6x1 8x1 10x1 15x1 20x1 25x1 30x1 AWG-No. Outer Ø approx. mm 20 15,0 20 15,5 20 17,7 20 19,7 18 6,9 18 7,2 18 8,0 18 9,2 18 9,8 18 12,0 18 13,5 18 14,7 18 16,9 18 17,6 Cop. weight kg/km 186,0 224,0 288,0 337,0 37,0 49,0 58,0 82,0 100,0 124,0 180,0 234,0 277,0 323,0 Weight approx. kg/km 401,0 477,0 623,0 752,0 80,0 86,0 101,0 130,0 168,0 226,0 295,0 386,0 462,0 590,0  Part no. 62780 62781 62782 62783 62784 62785 62786 62787 62788 62789 62790 62791 62792 62793  Dimensions and specifications may be changed without prior notice. (RN02) Tools Cable shears Box spanners Strippers Crimping tools Pliers Skinning knife You can find tools in our catalogue Cable Accessories. Request it now at www.helukabel.de N 41 No.cores x cross-sec. mm² 40x1 50x1 2x1,5 3x1,5 4x1,5 6x1,5 8x1,5 10x1,5 15x1,5 20x1,5 25x1,5 30x1,5 40x1,5 50x1,5 AWG-No. Outer Ø approx. mm 18 19,4 18 21,6 16 7,4 16 8,1 16 8,7 16 10,0 16 11,2 16 13,1 16 14,7 16 16,2 16 18,6 16 19,3 16 21,5 16 24,3 Cop. weight kg/km 416,0 508,0 51,0 63,0 76,0 104,0 134,0 168,0 234,0 301,0 367,0 428,0 550,0 669,0 Weight approx. kg/km 773,0 958,0 110,0 116,0 139,0 195,0 283,0 316,0 410,0 551,0 675,0 794,0 1033,0 1274,0 TRAYCONTROL 300 TP stranded pair, flexible, oil-resistant, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ Flexible PVC data and control cable Ⴠ Temperature range -25 °C to +105 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage 2000 V Ⴠ Minimum bending radius Flexing 6x cable ø Ⴠ Tinned copper conductor, fine wire stranded, with AWG measures Ⴠ Special PVC core insulation (AWG 22 - AWG 18 with transparent nylon skin) Ⴠ Pairidentification according to international colour code Ⴠ Cores stranded inpairs with optimal lay-length Ⴠ Pairs stranded in layers with optimal lay-length Ⴠ Separator Ⴠ Special PVC outer sheath Ⴠ Sheath colour - grey (RAL 7001) Ⴠ With length marking in feet Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Tests UL (AWG 22 - AWG 18): PLTC-ER, ITC-ER, Type CM, NFPA 79 2007, OIL RES I & II, Class I Div. 2, NEC Art. 501, 725, 760 & 800, AWM 2464 UL (AWG 24 - AWG 26): CM, AWM 2464, rated OIL RES I & II, NEC Art. 725, 760 & 800, NFPA 79 2007 CSA: CSA CMG FT4, AWM I/II A/B  Note Advantages Ⴠ Highly-flexible, easy to install Ⴠ Oil-resistant to OIL RES I & II Available on request Ⴠ PUR or TPE outer sheath Ⴠ Sheath colour to suit customer requirement  Application HELUKABEL® TRAYCONTROL 300 TP is a stranded pair data and control cable. Cross-sections with PLTC-ER and ITC-ER approval for open, unprotected installation in cable trays to the machine; their outstanding oil resistance (OIL RES I & II) makes them ideally suited as connecting and joining cables and also for control, signal and measuring systems in industrial plants. The flexible cable structure facilitates installation inside and outside of machines and switch cabinets. Applications: tool machines, control panels, measuring devices, production automation, cable ducts, renewable energies. = The product conforms to the EG Low-Voltage Directive 2006/95/EG   Part no. No.pairs x no.cores x cross-sec. mm² 62794 1x2x0,14 62795 2x2x0,14 62796 3x2x0,14 62797 4x2x0,14 62798 5x2x0,14 62799 6x2x0,14 62800 7x2x0,14 61928 8x2x0,14 61929 10x2x0,14 61930 12x2x0,14 61931 14x2x0,14 61932 15x2x0,14 61933 16x2x0,14 61934 18x2x0,14 61935 20x2x0,14 61936 22x2x0,14 61937 24x2x0,14 61938 25x2x0,14 61939 1x2x0,25 61940 2x2x0,25 61941 3x2x0,25 61942 4x2x0,25 61943 5x2x0,25 61944 6x2x0,25 61945 7x2x0,25 61946 8x2x0,25 61947 10x2x0,25 61948 12x2x0,25 61949 14x2x0,25 61950 15x2x0,25  AWG-No. 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 24 24 24 24 24 24 24 24 24 26 24 24 Outer Ø Cop. approx. mm weight kg/km 3,6 5,1 5,3 5,8 6,2 6,8 6,9 7,3 7,4 9,1 9,8 10,6 10,7 11,1 11,9 12,4 13,1 13,4 3,9 5,9 6,2 6,5 7,2 8,1 8,2 8,9 10,5 11,0 11,6 12,0 3,0 5,0 8,0 11,0 14,0 16,0 19,0 22,0 27,0 33,0 38,0 41,0 43,0 49,0 54,0 59,0 65,0 67,0 5,0 10,0 15,0 20,0 25,0 29,0 34,0 39,0 49,0 59,0 69,0 74,0 Weight approx. kg/km 20,0 24,0 30,0 38,0 44,0 51,0 57,0 64,0 76,0 93,0 103,0 109,0 112,0 119,0 130,0 150,0 169,0 178,0 32,0 36,0 48,0 56,0 71,0 80,0 89,0 98,0 111,0 135,0 160,0 171,0  Part no. No.pairs x no.cores x cross-sec. mm² 61951 16x2x0,25 61952 18x2x0,25 61953 20x2x0,25 61954 22x2x0,25 61955 24x2x0,25 61956 25x2x0,25 61957 1x2x0,34 61958 2x2x0,34 61959 3x2x0,34 61960 4x2x0,34 61961 5x2x0,34 61962 6x2x0,34 61963 7x2x0,34 61964 8x2x0,34 61965 10x2x0,34 61966 12x2x0,34 61967 14x2x0,34 61968 15x2x0,34 61969 16x2x0,34 61970 18x2x0,34 61971 20x2x0,34 61972 22x2x0,34 61973 24x2x0,34 61974 25x2x0,34 61975 1x2x0,75 61976 2x2x0,75 61977 3x2x0,75 61978 4x2x0,75 61979 5x2x0,75 61980 6x2x0,75 AWG-No. 24 24 24 24 24 24 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 Outer Ø Cop. approx. mm weight kg/km 12,1 13,5 14,4 15,3 16,1 16,7 4,2 6,4 6,8 79,0 8,2 8,9 9,0 9,9 11,7 12,4 13,0 13,2 13,3 14,2 15,1 15,8 17,0 17,5 5,2 8,8 9,3 10,2 11,3 12,5 79,0 89,0 98,0 109,0 118,0 124,0 7,0 13,0 20,0 7,6 33,0 39,0 46,0 52,0 65,0 78,0 92,0 98,0 105,0 118,0 131,0 144,0 157,0 163,0 11,0 22,0 32,0 43,0 54,0 65,0 Weight approx. kg/km 185,0 209,0 230,0 248,0 279,0 292,0 38,0 44,0 60,0 26,0 92,0 119,0 128,0 139,0 171,0 194,0 222,0 231,0 240,0 264,0 291,0 300,0 359,0 381,0 60,0 80,0 94,0 104,0 130,0 151,0  Continuation Ⴇ N 42 N TRAYCONTROL 300 TP stranded pair, flexible, oil-resistant, NFPA 79 Edition 2007   Part no. No.pairs x no.cores x cross-sec. mm² 61981 7x2x0,75 61982 8x2x0,75 61983 10x2x0,75 61984 12x2x0,75 61985 14x2x0,75 61986 15x2x0,75 61987 16x2x0,75 61988 18x2x0,75 61989 20x2x0,75 AWG-No. 20 20 20 20 20 20 20 20 20 Outer Ø Cop. approx. mm weight kg/km 12,6 15,9 16,4 17,2 18,1 18,5 18,6 19,9 21,1 75,0 86,0 108,0 129,0 151,0 161,0 172,0 194,0 215,0 Weight approx. kg/km 174,0 262,0 298,0 302,0 327,0 370,0 402,0 480,0 551,0  Part no. No.pairs x no.cores x cross-sec. mm² 61990 22x2x0,75 61991 24x2x0,75 61992 25x2x0,75 61993 1x2x1 61994 1x2x1 61995 3x2x1 61996 6x2x1 61997 9x2x1 61998 15x2x1 AWG-No. 20 20 20 18 18 18 18 18 18 Outer Ø Cop. approx. mm weight kg/km 21,8 23,5 24,3 5,6 9,6 10,6 13,7 16,4 20,4 237,0 258,0 269,0 18,0 36,0 54,0 107,0 162,0 271,0 Weight approx. kg/km 621,0 703,0 721,0 61,0 77,0 103,0 216,0 328,0 542,0  Dimensions and specifications may be changed without prior notice. (RN02) Signal and power circular connectors Series A, B, C, D, F and S Tools Accessories Online configurator Pre-assembled cables You can find signal and power circular connectors in our catalogue Cable Accessories. Request it now at www.helukabel.de N 43 TRAYCONTROL 300-C TP stranded pair, flexible, screened, oil-resistant, EMC-preferred type, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ Flexible screened PVC data and control cable Ⴠ Temperature range -25 °C to +105 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage 2000 V Ⴠ Minimum bending radius Flexing 6x cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Tinned copper conductor, fine wire stranded, with AWG measures Ⴠ Special PVC core insulation (AWG 22 - AWG 18 with transparent nylon skin) Ⴠ Pairidentification according to international colour code Ⴠ Cores stranded inpairs with optimal lay-length Ⴠ Pairs stranded in layers with optimal lay-length Ⴠ 1. Screening with special aluminium foil 2. Screening with braid of tinned copper wires, optimal coverage, approx. 85% Ⴠ Separator Ⴠ Special PVC outer sheath Ⴠ Sheath colour - grey (RAL 7001) Ⴠ With length marking in feet Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Tests UL (AWG 22 - AWG 18): PLTC-ER, ITC-ER, CM, NFPA 79 2007, OIL RES I & II, Class I Div. 2, NEC Art. 501, 725, 760 & 800, AWM 2464 UL (AWG 24 - AWG 26): CM, AWM 2464, rated OIL RES I & II, NEC Art. 725, 760 & 800, NFPA 79 2007 CSA: CSA CMG FT4, AWM I/II A/B  Note Advantages Ⴠ Highly-flexible, easy to install Ⴠ Oil-resistant to OIL RES I & II Available on request Ⴠ PUR or TPE outer sheath Ⴠ Sheath colour to suit customer requirement  Application HELUKABEL® TRAYCONTROL 300 is a screened, stranded pairdata and control cable. Cross-sections with PLTC-ER and ITC-ER approval suitable for open, unprotected installation in cable trays to the machine; their outstanding oil resistance (OIL RES I & II) makes them ideally suited as connecting and joining cables and also for control, signal and measuring systems in industrial plants. The flexible cable structure facilitates installation inside and outside of machines and switch cabinets. The double-screening with aluminium foil (100% coverage) and copper braid (approx. 85% coverage) guarantee superior EMC protection. Applications: tool machines, control panels, measuring devices, production automation, cable ducts, renewable energies.  EMC = Electromagnetic compatibility. To optimise EMC characteristics, we recommend a large contact area for the copper braiding around the entire circumference on both ends. = The product conforms to the EG Low-Voltage Directive 2006/95/EG   Part no. No.pairs x no.cores x cross-sec. mm² 61999 1x2x0,14 59760 2x2x0,14 59761 3x2x0,14 59762 4x2x0,14 59763 5x2x0,14 59764 6x2x0,14 59765 7x2x0,14 59766 8x2x0,14 59767 10x2x0,14 59768 12x2x0,14 59769 14x2x0,14 59770 15x2x0,14 59771 16x2x0,14 59772 18x2x0,14 59773 20x2x0,14 59774 22x2x0,14 59775 24x2x0,14 59776 25x2x0,14 59777 1x2x0,25 59778 2x2x0,25 59779 3x2x0,25 59780 4x2x0,25 59781 5x2x0,25 59782 6x2x0,25 59783 7x2x0,25 59784 8x2x0,25  AWG-No. 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 24 24 24 26 24 24 24 24 Outer Ø Cop. approx. mm weight kg/km 4,0 5,6 5,8 6,3 6,7 7,3 7,4 7,8 9,1 9,8 10,5 11,1 11,2 11,8 12,4 13,1 13,6 15,1 4,6 6,6 6,9 7,5 8,0 8,8 8,9 9,7 16,0 20,0 24,0 27,0 31,0 50,0 52,0 54,0 60,0 67,0 75,0 77,0 80,0 84,0 98,0 104,0 112,0 114,0 16,0 27,0 32,0 37,0 55,0 66,0 60,0 74,0 Weight approx. kg/km 32,0 39,0 47,0 55,0 68,0 86,0 92,0 97,0 111,0 141,0 150,0 154,0 155,0 170,0 183,0 207,0 228,0 239,0 46,0 53,0 65,0 79,0 98,0 114,0 121,0 129,0  Part no. No.pairs x no.cores x cross-sec. mm² 59785 10x2x0,25 59786 12x2x0,25 59787 14x2x0,25 59788 15x2x0,25 59789 16x2x0,25 59790 18x2x0,25 59791 20x2x0,25 59792 22x2x0,25 59793 24x2x0,25 59794 25x2x0,25 59795 1x2x0,34 59796 2x2x0,34 59797 3x2x0,34 59798 4x2x0,34 59799 5x2x0,34 59800 6x2x0,34 59801 7x2x0,34 59802 8x2x0,34 59803 10x2x0,34 59804 12x2x0,34 59805 14x2x0,34 59806 15x2x0,34 59807 16x2x0,34 59808 18x2x0,34 59809 20x2x0,34 59810 22x2x0,34 AWG-No. 24 24 24 24 24 24 24 24 24 24 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 Outer Ø Cop. approx. mm weight kg/km 11,4 11,8 12,6 12,8 12,9 13,8 14,4 15,3 16,4 16,7 4,9 7,1 7,7 8,4 9,0 9,6 9,7 10,7 12,7 13,2 13,9 14,1 14,2 15,3 15,9 16,8 109,0 116,0 121,0 132,0 142,0 147,0 161,0 171,0 230,0 231,0 17,0 37,0 45,0 54,0 63,0 73,0 79,0 88,0 107,0 122,0 138,0 154,0 161,0 198,0 211,0 218,0 Weight approx. kg/km 152,0 189,0 213,0 225,0 227,0 238,0 270,0 300,0 321,0 340,0 58,0 65,0 79,0 88,0 110,0 126,0 140,0 148,0 184,0 210,0 241,0 245,0 251,0 275,0 300,0 320,0  Continuation Ⴇ N 44 N TRAYCONTROL 300-C TP stranded pair, flexible, screened, oil-resistant, EMC-preferred type, NFPA 79 Edition 2007   Part no. No.pairs x no.cores x cross-sec. mm² 59811 24x2x0,34 59812 25x2x0,34 59813 1x2x0,75 59814 2x2x0,75 59815 3x2x0,75 59816 4x2x0,75 59817 5x2x0,75 59818 6x2x0,75 59819 7x2x0,75 59820 8x2x0,75 59821 10x2x0,75 59822 12x2x0,75 59823 14x2x0,75 AWG-No. 22 22 20 20 20 20 20 20 20 20 20 20 20 Outer Ø Cop. approx. mm weight kg/km 18,0 18,3 5,9 9,4 10,5 11,5 12,6 13,3 13,4 16,8 17,5 18,0 19,1 230,0 239,0 26,0 56,0 72,0 92,0 107,0 122,0 132,0 144,0 180,0 202,0 221,0 Weight approx. kg/km 371,0 402,0 70,0 89,0 102,0 119,0 140,0 162,0 198,0 272,0 307,0 318,0 342,0  Part no. No.pairs x no.cores x cross-sec. mm² 59824 15x2x0,75 59825 16x2x0,75 59826 18x2x0,75 59827 20x2x0,75 59828 22x2x0,75 59829 24x2x0,75 59830 25x2x0,75 59831 1x2x1 59832 2x2x1 59833 3x2x1 59834 6x2x1 59835 9x2x1 59836 15x2x1 AWG-No. 20 20 20 20 20 20 20 18 18 18 18 18 18  Dimensions and specifications may be changed without prior notice. (RN02) Cable Glands Cable glands for standard applications Plastic Glands Cable Glands of Brass Accessories Cable glands for special application conditions for electromagnetic compatibility EMC for rugged applications and special chemical resistance for high temperature use for explosive areas for special mounting conditions for special pressure conditions You can find cable glands in our catalogue Cable Accessories. Request it now at www.helukabel.de N 45 Outer Ø Cop. approx. mm weight kg/km 19,4 19,5 20,5 21,5 22,6 24,4 24,9 6,3 10,2 11,5 14,6 17,2 21,3 232,0 257,0 282,0 307,0 322,0 342,0 361,0 28,0 57,0 75,0 139,0 212,0 358,0 Weight approx. kg/km 381,0 417,0 494,0 570,0 643,0 724,0 740,0 104,0 121,0 150,0 328,0 490,0 811,0 JZ-602-PUR 80°C, 600V, two approvals control cable, meter marking   Technical data Cable structure Properties Ⴠ Control cable of special-PUR to UL CSA AWM I/II A/B Style20939 (jacket insulation) and CSA Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage according to UL + CSA 600 V Ⴠ Test voltage 3000 V Ⴠ Breakdown voltage min. 6000 V Ⴠ Insulation resistance min 20 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Bare copper, fine wire stranded to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation TI3, to DINVDE0281 part1 and UL-Style10012 Ⴠ Black cores with continuous white numbering according to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Full-polyurethane outer jacket grey (RAL 7001) Ⴠ with meter marking, change-over in 2011  Ⴠ Resistant to mineral oils, synthetic oils, water based coolants, UV-radiation, oxygene, ozon and hydrolysis. Conditionally resistant to microbes. Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ unscreened analogue type: JZ-602-C-PUR, see page N 51  Application UL and CSA approved flexible control cable rated at 600 V, primarily designed for exporters to the US or Canadian market. Used in machine tools, control systems, connection between control panels and machines, assembly lines and other industrial equipment. Suitable for installation in dry, moist, wet and outdoor environment and moderate flexing applications. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 12471 12472 12473 12474 12475 12476 12477 12478 12479 12480 12481 12482 12483 12484 12485 12486 12487 12488 12489 12490 12491 12492 12493 12494  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 8G0,5 9G0,5 12G0,5 18G0,5 25G0,5 34G0,5 41G0,5 2x1 3G1 4G1 5G1 7G1 8G1 9G1 12G1 18G1 25G1 34G1 41G1 AWG-No. Outer Ø approx. mm 20 5,8 20 6,2 20 6,6 20 7,2 20 8,4 20 9,5 20 10,3 20 10,8 20 12,8 20 15,4 20 17,6 20 19,7 18 6,2 18 6,6 18 7,2 18 7,8 18 9,1 18 9,9 18 11,0 18 11,7 18 14,0 18 17,0 18 19,2 18 21,0 Cop. weight kg/km 9,6 14,0 19,0 24,0 34,0 38,4 43,2 58,0 86,0 120,0 163,0 197,0 19,2 27,0 38,4 48,0 67,0 76,8 86,4 115,2 173,0 240,0 326,0 394,0 Weight approx. kg/km 52,0 64,0 72,0 88,0 130,0 145,0 180,0 196,0 260,0 368,0 502,0 594,0 57,0 68,0 79,0 97,0 141,0 152,0 190,0 211,0 284,0 394,0 521,0 609,0  Part no. 12495 12496 12497 12498 12499 12500 12501 12502 12503 12504 12505 12506 12507 12508 12509 12510 12511 12512 12513 12514 12515 12516 12517 No.cores x cross-sec. mm² 2x1,5 3G1,5 4G1,5 5G1,5 7G1,5 9G1,5 12G1,5 18G1,5 25G1,5 34G1,5 41G1,5 2x2,5 3G2,5 4G2,5 5G2,5 7G2,5 9G2,5 12G2,5 18G2,5 19G2,5 25G2,5 3G4 4G4 AWG-No. Outer Ø approx. mm 16 6,8 16 7,4 16 8,0 16 8,6 16 10,5 16 12,7 16 13,3 16 15,7 16 18,8 16 22,0 16 23,6 14 8,1 14 8,6 14 10,0 14 10,8 14 13,0 14 15,5 14 16,6 14 19,5 14 19,5 14 23,8 12 11,1 12 12,4 Cop. weight kg/km 28,8 44,0 58,0 72,0 101,0 129,7 173,0 260,0 360,0 490,0 590,0 48,0 72,0 96,0 120,0 168,0 216,0 288,0 432,0 456,0 600,0 115,0 154,0 Weight approx. kg/km 75,0 96,0 117,0 140,0 186,0 244,0 319,0 451,0 625,0 850,0 1041,0 115,0 143,0 185,0 221,0 293,0 429,0 563,0 854,0 914,0 1188,0 232,0 298,0 N  Continuation Ⴇ N 46 JZ-602-PUR 80°C, 600V, two approvals control cable, meter marking   Part no. 12518 12519 12520 12521 12522 12523 12524 12525 12526 No.cores x cross-sec. mm² 5G4 7G4 3G6 4G6 5G6 7G6 3G10 4G10 5G10 AWG-No. Outer Ø approx. mm 12 13,7 12 16,2 10 12,8 10 14,1 10 15,7 10 19,2 8 16,8 8 18,3 8 20,1 Cop. weight kg/km 192,0 269,0 173,0 231,0 288,0 403,0 288,0 384,0 480,0 Weight approx. kg/km 358,0 460,0 360,0 402,0 484,0 630,0 535,0 653,0 786,0  Part no. 12527 12528 12529 12530 12531 12532 12533 12534 12535 12536 12537 12538 12539 12540 12541 12542 12543 No.cores x cross-sec. mm² 7G10 2x16 3G16 4G16 5G16 7G16 3G25 4G25 5G25 7G25 3G35 4G35 5G35 4G50 4G70 4G95 4G120  Dimensions and specifications may be changed without prior notice. (RN01) Conduits Corrugated tubes for standard applications for lager sizes scissile corrugated tubes conduit glands High flexible conduits plastic conduits with spiral spring metal conduits conduits glands Conduit for heavy mechanical duty metal conduits with plastic sheat plastic conduits conduits glands for metal conduits You can find conduits in our catalogue Cable Accessories. Request it now at www.helukabel.de N 47 AWG-No. Outer Ø approx. mm 8 22,4 6 19,2 6 20,5 6 23,0 6 25,5 6 28,2 4 25,0 4 28,1 4 30,9 4 35,5 2 28,6 2 31,7 2 35,5 1 35,8 2/0 41,6 3/0 46,0 4/0 52,8 Cop. weight kg/km 672,0 307,0 461,0 615,0 768,0 1075,0 720,0 960,0 1200,0 1680,0 1008,0 1344,0 1680,0 1920,0 2688,0 3648,0 4608,0 Weight approx. kg/km 1100,0 640,0 810,0 1045,0 1260,0 1760,0 1180,0 1507,0 1858,0 2830,0 1590,0 2123,0 2612,0 3058,0 4254,0 5762,0 7280,0 JZ-602-PUR DC/AC 80°C, 600V, two approvals control cable, meter marking   Technical data Cable structure Properties Ⴠ Control cable of special-PUR to UL CSA AWM I/II A/B Style20939 (jacket insulation) and CSA Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage according to UL + CSA 600 V Ⴠ Test voltage 3000 V Ⴠ Breakdown voltage min. 6000 V Ⴠ Insulation resistance min 20 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Bare copper, fine wire stranded to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation TI3, to DINVDE0281 part1 and UL-Style10012 Ⴠ Blue (DC) or red (AC) cores with continuous white numbering Ⴠ Green-yellow earth core Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Full-polyurethane outer jacket grey (RAL 7001) Ⴠ with meter marking, change-over in 2011  Ⴠ Resistant to mineral oils, synthetic oils, water based coolants, UV-radiation, oxygene, ozon and hydrolysis. Conditionally resistant to microbes. Ⴠ High abrasion resistance Ⴠ Tear and cut resistant Ⴠ The materials used in manufacturing are cadmium-free and do not contain no silicone any silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ Ⴠ Ⴠ Ⴠ G = with green-yellow earth core; DC = blue cores; AC = red cores; AWG sizes are approximate equivalent values. The actual cross-section is in mm².  Application For use on conveyor belts, tooling machines, conveyor system, production lines and automotive production plants. Also for medium mechanical stress in flexible applications with free movement and without tensile stress. UL and CSA approved control cables espacially for U.S. and Canadian markets. =The product conforms to the EC Low Voltage Directive 2006/95/EG  JZ-602 PUR DC (blue core) Part no. 12805 12806 12807 12808 12809 12810 12811 12812 12813 12814 12815 12816 12817 12818 12819 12820 12821 12822 12823 12824 12825 No.cores x cross-sec. mm² 3G1 4G1 5G1 7G1 12G1 18G1 25G1 3G1,5 4G1,5 5G1,5 7G1,5 12G1,5 18G1,5 25G1,5 3G2,5 4G2,5 5G2,5 7G2,5 12G2,5 18G2,5 25G2,5 AWG-No. Outer Ø approx. mm 18 6,6 18 7,2 18 7,8 18 9,1 18 11,7 18 14,0 18 17,0 16 7,4 16 8,0 16 8,6 16 10,5 16 13,3 16 15,7 16 18,8 14 8,6 14 10,0 14 10,8 14 13,0 14 16,6 14 19,5 14 23,8  Cop. weight kg/km 27,0 38,0 48,0 67,0 115,0 173,0 240,0 44,0 58,0 72,0 101,0 173,0 260,0 360,0 72,0 96,0 120,0 168,0 288,0 432,0 600,0 Weight approx. kg/km 68,0 79,0 97,0 141,0 211,0 284,0 394,0 96,0 117,0 140,0 186,0 319,0 451,0 625,0 143,0 185,0 221,0 293,0 563,0 854,0 1188,0 JZ-602 PUR AC (red core) Part no. 12826 12827 12828 12829 12830 12831 12832 12833 12834 12835 12836 12837 12838 12839 12840 12841 12842 12843 12844 12845 12846 No.cores x cross-sec. mm² 3G1 4G1 5G1 7G1 12G1 18G1 25G1 3G1,5 4G1,5 5G1,5 7G1,5 12G1,5 18G1,5 25G1,5 3G2,5 4G2,5 5G2,5 7G2,5 12G2,5 18G2,5 25G2,5 AWG-No. Outer Ø approx. mm 18 6,6 18 7,2 18 7,8 18 9,1 18 11,7 18 14,0 18 17,0 16 7,4 16 8,0 16 8,6 16 10,5 16 13,3 16 15,7 16 18,8 14 8,6 14 10,0 14 10,8 14 13,0 14 16,6 14 19,5 14 23,8 Cop. weight kg/km 27,0 38,0 48,0 67,0 115,0 173,0 240,0 44,0 58,0 72,0 101,0 173,0 260,0 360,0 72,0 96,0 120,0 168,0 288,0 432,0 600,0 Weight approx. kg/km 68,0 79,0 97,0 141,0 211,0 284,0 394,0 96,0 117,0 140,0 186,0 319,0 451,0 625,0 143,0 185,0 221,0 293,0 563,0 854,0 1188,0 N  Dimensions and specifications may be changed without prior notice. (RN01) N 48 JZ-600 PUR tear and coolant resistant, 0,6/1kV, meter marking   Technical data Cable structure Properties Ⴠ Special PUR control cables Adapted to DINVDE0276 part627, DINVDE0281 part13, with insulation thickness for 1kV type and UL-Std.758 Style20234 Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage U0/U 0,6/1 kV Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Power rating as per DIN VDE 0298 Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Bare copper, fine wire conductors, as per DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation TI2, to DINVDE0281 part1, class43 UL-Std.1581UL-Style10012 Ⴠ Black cores with white figure imprints to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Outer jacket, special full-polyurethane adapted to DINVDE0282 part10, appendixA, flame retardant to UL-Std.758 Ⴠ Colour black (RAL9005) or grey (RAL7001) Ⴠ with meter marking, change-over in 2011  Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ  High abrasion resistance High flexibility Resistant to ultra violet rays Wear resistant The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core. Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ screened analogue type: JZ-600-YC-PUR, see page N 52  Application Extremely robust, control cable resistant to mineral oils and to coolant emulsions. In tool machinery, conveyor belts and production lines, for plant installations, air conditioning and in steel production plants and rolling mills. Suitable for installation for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms as well as outside. Interesting for the export-oriented machinery plants. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x Jacket cross-sec. colour mm² black 28240 2x0,5 28241 3G0,5 28242 4G0,5 28243 5G0,5 28244 7G0,5 28245 12G0,5 28246 18G0,5 28247 25G0,5 28248 2x0,75 28249 3G0,75 28250 4G0,75 28251 5G0,75 28252 7G0,75 28253 12G0,75 28254 18G0,75 28255 25G0,75 28256 2x1 28257 3G1 28258 4G1 28259 5G1 28260 7G1 28261 12G1 28262 18G1 28263 25G1 28264 2x1,5 28265 3G1,5 28266 4G1,5 28267 5G1,5 28268 7G1,5 28269 12G1,5 28270 18G1,5 28271 25G1,5  AWG-No. 20 20 20 20 20 20 20 20 19 19 19 19 19 19 19 19 18 18 18 18 18 18 18 18 16 16 16 16 16 16 16 16 Outer Ø Cop. approx. mm weight kg/km 6,9 7,3 7,9 8,5 9,9 12,2 14,4 17,2 7,3 7,7 8,3 9,1 10,7 13,1 15,6 18,9 7,9 8,3 9,1 9,9 11,7 14,5 17,3 21,1 8,7 9,2 10,0 11,0 13,3 16,6 19,7 23,9 9,6 14,4 19,0 24,0 33,6 58,0 86,0 120,0 14,4 21,6 29,0 36,0 50,0 86,0 130,0 180,0 19,2 29,0 38,4 48,0 67,0 115,0 173,0 240,0 29,0 43,0 58,0 72,0 101,0 173,0 259,0 360,0 Weight approx. kg/km 60,0 70,0 104,0 120,0 141,0 208,0 289,0 342,0 70,0 78,0 134,0 149,0 201,0 269,0 378,0 498,0 86,0 100,0 107,0 130,0 174,0 290,0 405,0 570,0 97,0 118,0 141,0 181,0 234,0 370,0 520,0 730,0  Part no. No.cores x Jacket cross-sec. colour mm² grey 28305 2x0,5 28306 3G0,5 28307 4G0,5 28308 5G0,5 28309 7G0,5 28310 12G0,5 28311 18G0,5 28312 25G0,5 28313 2x0,75 28314 3G0,75 28315 4G0,75 28316 5G0,75 28317 7G0,75 28318 12G0,75 28319 18G0,75 28320 25G0,75 28321 2x1 28322 3G1 28323 4G1 28324 5G1 28325 7G1 28326 12G1 28327 18G1 28328 25G1 28329 2x1,5 28330 3G1,5 28331 4G1,5 28332 5G1,5 28333 7G1,5 28334 12G1,5 28335 18G1,5 28336 25G1,5 AWG-No. 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 17 17 17 17 17 17 17 17 16 16 16 16 16 16 16 16 Outer Ø Cop. approx. mm weight kg/km 6,9 7,3 7,9 8,5 9,9 12,2 14,4 17,2 7,3 7,7 8,3 9,1 10,7 13,1 15,6 18,9 7,9 8,3 9,1 9,9 11,7 14,5 17,3 21,1 8,7 9,2 10,0 11,0 13,3 16,6 19,7 23,9 9,6 14,4 19,0 24,0 33,6 58,0 86,0 120,0 14,4 21,6 29,0 36,0 50,0 86,0 130,0 180,0 19,2 29,0 38,4 48,0 67,0 115,0 173,0 240,0 29,0 43,0 58,0 72,0 101,0 173,0 259,0 360,0 Weight approx. kg/km 60,0 70,0 104,0 120,0 141,0 208,0 289,0 342,0 70,0 78,0 134,0 149,0 201,0 269,0 378,0 498,0 86,0 100,0 107,0 130,0 174,0 290,0 405,0 570,0 97,0 118,0 141,0 181,0 234,0 370,0 520,0 730,0  Continuation Ⴇ N 49 JZ-600 PUR tear and coolant resistant, 0,6/1kV, meter marking  Part no. No.cores x Jacket cross-sec. colour mm² black 28272 2x2,5 28273 3G2,5 28274 4G2,5 28275 5G2,5 28276 7G2,5 28277 12G2,5 28278 18G2,5 28279 25G2,5 28280 2x4 28281 3G4 28282 4G4 28283 5G4 28284 7G4 28285 12G4 28286 3G6 28287 4G6 28288 5G6 28289 7G6 28290 3G10 28291 4G10 28292 5G10 28293 7G10 28294 3G16 28295 4G16 28296 5G16 28297 7G16 28298 3G25 28299 4G25 28300 5G25 28301 7G25  AWG-No. 14 14 14 14 14 14 14 14 12 12 12 12 12 12 10 10 10 10 8 8 8 8 6 6 6 6 4 4 4 4 Outer Ø Cop. approx. mm weight kg/km 9,5 10,0 11,1 12,4 15,0 18,4 22,0 26,9 11,4 12,3 13,8 15,3 16,8 22,9 14,1 15,6 17,3 19,3 16,5 18,4 20,5 22,5 19,6 21,7 24,2 25,7 24,0 26,9 29,3 32,6 48,0 72,0 96,0 120,0 168,0 288,0 432,0 600,0 77,0 115,0 154,0 192,0 269,0 461,0 173,0 230,0 288,0 403,0 288,0 384,0 480,0 672,0 461,0 614,0 768,0 1075,0 720,0 960,0 1200,0 1680,0 Weight approx. kg/km 170,0 181,0 203,0 251,0 330,0 553,0 795,0 1110,0 190,0 235,0 310,0 410,0 540,0 860,0 370,0 430,0 650,0 860,0 660,0 790,0 960,0 1300,0 709,0 1114,0 1620,0 1900,0 1450,0 1600,0 2050,0 2900,0  Part no. No.cores x Jacket cross-sec. colour mm² grey 28337 2x2,5 28338 3G2,5 28339 4G2,5 28340 5G2,5 28341 7G2,5 28342 12G2,5 28343 18G2,5 28344 25G2,5 28345 2x4 28346 3G4 28347 4G4 28348 5G4 28349 7G4 28350 12G4 28351 3G6 28352 4G6 28353 5G6 28354 7G6 28355 3G10 28356 4G10 28357 5G10 28358 7G10 28359 3G16 28360 4G16 28361 5G16 28362 7G16 28363 3G25 28364 4G25 28365 5G25 28366 7G25 AWG-No. 14 14 14 14 14 14 14 14 12 12 12 12 12 12 10 10 10 10 8 8 8 8 6 6 6 6 4 4 4 4 Outer Ø Cop. approx. mm weight kg/km 9,5 10,0 11,1 12,4 15,0 18,4 22,0 26,9 11,4 12,3 13,8 15,3 16,8 22,9 14,1 15,6 17,3 19,3 16,5 18,4 20,5 22,5 19,6 21,7 24,2 25,8 24,0 26,9 29,3 32,6 48,0 72,0 96,0 120,0 168,0 288,0 432,0 600,0 77,0 115,0 154,0 192,0 269,0 461,0 173,0 230,0 288,0 403,0 288,0 384,0 480,0 672,0 461,0 614,0 768,0 1075,0 720,0 960,0 1200,0 1680,0 Weight approx. kg/km 170,0 181,0 203,0 251,0 330,0 553,0 795,0 1110,0 190,0 235,0 310,0 410,0 540,0 860,0 370,0 430,0 650,0 860,0 660,0 790,0 960,0 1300,0 709,0 1114,0 1620,0 1900,0 1450,0 1600,0 2050,0 2900,0  Dimensions and specifications may be changed without prior notice. (RN01) N N 50 JZ-602-C-PUR screened two approvals control cable, 80°C, 600V, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special PUR-insulated to UL CSA AWM I/II A/B Style20939 (jacket insulation) and CSA Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage according to UL+CSA 600 V Ⴠ Test voltage 3000 V Ⴠ Breakdown voltage min. 6000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius flexing 10x cable ø fixed installation 5x cable ø Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, fine wire stranded to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation TI3, to DINVDE0281 part1 and UL-Style10012 Ⴠ Black cores with continuous white numbering according to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal lay-length Ⴠ PVC-insulated inner sheath YM5 to DINVDE0207 part5 Ⴠ Braided screen of tinned Cu wires approx. 85% coverage Ⴠ Full-polyurethane outer jacket grey (RAL 7001) Ⴠ with meter marking, change-over in 2011  Ⴠ Resistant to mineral oils, synthetic oils and refrigerants, UV-radiation, osygene, ozon and hydrolysis. Conditionally resistant to microbes. Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ unscreened analogue type: JZ-602 PUR, see page N 46  Application UL and CSA approved flexible control cables up to 600 V, for all machinery in tooling and plant construction, suitable for installation in dry, moist, wet and outdoor environments for medium mechanical loads. Designed for the export-orientated machinery manufacturer, specifically for USA and Canada. EMC = Electromagnetic compatibility To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 12550 12551 12552 12553 12554 12555 12556 12557 12558 12559 12560 12561 12562 12563 12564 12565 12566 12567 12568 12569 12570 12571 12572 12573 12574 12575 12576 12577 12578 12579 12580 12581 12582 12583 12584 12585 12586 12587  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 9G0,5 12G0,5 18G0,5 25G0,5 34G0,5 41G0,5 2x1 3G1 4G1 5G1 7G1 9G1 12G1 18G1 25G1 34G1 41G1 2x1,5 3G1,5 4G1,5 5G1,5 7G1,5 9G1,5 12G1,5 18G1,5 25G1,5 34G1,5 41G1,5 2x2,5 3G2,5 4G2,5 5G2,5 7G2,5 AWG-No. Outer Ø approx. mm 20 7,7 20 8,0 20 8,6 20 9,2 20 10,5 20 12,3 20 13,0 20 15,6 20 18,2 20 20,1 20 22,4 18 8,1 18 8,4 18 9,1 18 10,0 18 11,3 18 13,3 18 13,8 18 16,2 18 19,5 18 22,5 18 24,2 16 8,7 16 9,2 16 10,0 16 10,8 16 12,9 16 14,8 16 15,6 16 18,3 16 22,5 16 25,1 16 27,3 14 10,3 14 10,8 14 11,8 14 13,2 14 15,6 Cop. weight kg/km 41,0 45,0 54,0 66,0 79,0 94,0 137,0 156,0 250,0 316,0 348,0 54,0 64,0 76,0 89,0 114,0 144,0 186,0 284,0 387,0 500,0 578,0 64,0 82,0 99,0 123,0 148,0 187,0 274,0 386,0 531,0 671,0 840,0 110,0 148,0 169,0 220,0 284,0 Weight approx. kg/km 93,0 124,0 133,0 153,0 191,0 243,0 322,0 374,0 436,0 560,0 663,0 107,0 130,0 155,0 181,0 209,0 321,0 341,0 473,0 650,0 781,0 892,0 136,0 165,0 192,0 224,0 273,0 340,0 461,0 674,0 950,0 1203,0 1588,0 173,0 220,0 270,0 329,0 428,0  Dimensions and specifications may be changed without prior notice. (RN01) N 51  Part no. 12588 12589 12590 12591 12592 12593 12594 12595 12596 12597 12598 12599 12600 12601 12602 12603 12604 12605 12606 12607 12608 12609 12610 12611 12612 12613 12614 12615 12616 12617 12618 12619 12620 No.cores x cross-sec. mm² 9G2,5 12G2,5 18G2,5 25G2,5 2x4 3G4 4G4 5G4 7G4 2x6 3G6 4G6 5G6 7G6 3G10 4G10 5G10 7G10 3G16 4G16 5G16 7G16 3G25 4G25 5G25 7G25 3G35 4G35 5G35 4G50 4G70 4G95 4G120 AWG-No. Outer Ø approx. mm 14 18,1 14 19,2 14 23,0 14 28,3 12 12,5 12 13,1 12 14,5 12 15,8 12 19,0 10 14,2 10 15,2 10 16,6 10 18,4 10 22,2 8 19,1 8 21,1 8 23,7 8 26,5 6 24,2 6 27,2 6 30,6 6 33,6 4 30,2 4 33,3 4 36,8 4 40,6 2 33,8 2 37,7 2 41,5 1 40,5 2/0 46,1 3/0 50,7 4/0 57,0 Cop. weight kg/km 349,0 470,0 572,0 740,0 124,0 178,0 234,0 284,0 321,0 176,0 245,0 316,0 442,0 530,0 367,0 549,0 604,0 820,0 653,0 807,0 940,0 1345,0 920,0 1169,0 1420,0 1921,0 1250,0 1680,0 2020,0 2370,0 3257,0 4060,0 5231,0 Weight approx. kg/km 580,0 761,0 1140,0 1551,0 209,0 310,0 456,0 532,0 737,0 318,0 411,0 572,0 732,0 961,0 741,0 988,0 1202,0 1743,0 1088,0 1662,0 2021,0 2720,0 1947,0 2591,0 3197,0 4530,0 2701,0 3277,0 4530,0 3370,0 4630,0 6114,0 7417,0 JZ-600-YC-PUR tear and coolant resistant, 0,6/1kV, Cu-screened, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special PUR control cables Adapted to DINVDE0276 part627, DINVDE0281 part13, with insulation thickness for 1kV type and UL-Std.758 Style20234 Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage U0/U 0,6/1 kV Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Power rating as per DIN VDE 0298 Ⴠ Minimum bending radius flexing 10x cable ø fixed installation 5x cable ø Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, fine wire conductors, as per DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Special PVC core insulation TI2, to DINVDE0281 part1, class43 UL-Std.1581 UL-Style10012 Ⴠ Black cores with white figure imprints to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Oil resistant PVC inner jacket, TM5 to DINVDE0281 part1 and class43 gem. UL-Std.1581 Ⴠ Tinned copper braided screening, approx. 85% coverage Ⴠ Outer jacket, special full-polyurethane adapted to DINVDE0282 part10, appendixA, flame retardant to UL-Std.758 Ⴠ Colour black (RAL9005) or grey (RAL7001) Ⴠ with meter marking, change-over in 2011  Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ   High abrasion resistance High flexibility Resistant to ultra violet rays Wear resistant The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core. Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ unscreened analogue type: JZ-600 PUR, see page N 49  Application Extremely robust, control cable resistant to mineral oils and to coolant emulsions. In tool machinery, conveyor belts and production lines, for plant installations, air conditioning and in steel production plants and rolling mills. Suitable for installation for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms as well as outside. Interesting for the export-oriented machinery plants. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x Jacket cross-sec. colour mm² black 28370 2x0,5 28371 3G0,5 28372 4G0,5 28373 5G0,5 28374 7G0,5 28375 12G0,5 28376 18G0,5 28377 25G0,5 28378 2x0,75 28379 3G0,75 28380 4G0,75 28381 5G0,75 28382 7G0,75 28383 12G0,75 28384 18G0,75 28385 25G0,75 28386 2x1 28387 3G1 28388 4G1 28389 5G1 28390 7G1 28391 12G1 28392 18G1 28393 25G1 28394 2x1,5 28395 3G1,5 28396 4G1,5  AWG-No. 20 20 20 20 20 20 20 20 19 19 19 19 19 19 19 19 18 18 18 18 18 18 18 18 16 16 16 Outer Ø Cop. approx. mm weight kg/km 9,0 9,3 9,9 10,6 12,2 14,7 17,3 20,6 9,4 9,8 10,4 11,1 13,0 15,8 17,9 22,8 9,9 10,3 11,1 12,2 14,5 17,4 20,7 24,8 10,7 11,2 12,3 41,0 45,0 54,0 66,0 79,0 137,0 156,0 250,0 46,0 57,0 63,0 76,0 100,0 175,0 240,0 306,0 54,0 64,0 76,0 89,0 114,0 186,0 284,0 387,0 64,0 82,0 99,0 Weight approx. kg/km 131,0 154,0 176,0 204,0 237,0 323,0 431,0 507,0 143,0 158,0 193,0 231,0 337,0 424,0 568,0 741,0 158,0 169,0 207,0 244,0 292,0 472,0 634,0 861,0 166,0 192,0 246,0  Part no. No.cores x Jacket cross-sec. colour mm² grey 28430 2x0,5 28431 3G0,5 28432 4G0,5 28433 5G0,5 28434 7G0,5 28435 12G0,5 28436 18G0,5 28437 25G0,5 28438 2x0,75 28439 3G0,75 28440 4G0,75 28441 5G0,75 28442 7G0,75 28443 12G0,75 28444 18G0,75 28445 25G0,75 28446 2x1 28447 3G1 28448 4G1 28449 5G1 28450 7G1 28451 12G1 28452 18G1 28453 25G1 28454 2x1,5 28455 3G1,5 28456 4G1,5 AWG-No. 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 17 17 17 17 17 17 17 17 16 16 16 Outer Ø Cop. approx. mm weight kg/km 9,0 9,3 9,9 10,6 12,2 14,7 17,3 20,6 9,4 9,8 10,4 11,1 13,0 15,8 17,9 22,8 9,9 10,3 11,1 12,2 14,5 17,4 20,7 24,8 10,7 11,2 12,3 30,0 39,0 52,0 61,0 75,0 130,0 170,0 230,0 39,0 57,0 68,0 79,0 96,0 169,0 224,0 292,0 51,8 67,0 78,0 94,0 122,0 201,0 275,0 364,0 68,0 84,0 104,0 Weight approx. kg/km 131,0 154,0 176,0 204,0 237,0 323,0 431,0 507,0 143,0 158,0 193,0 231,0 337,0 424,0 568,0 741,0 158,0 169,0 207,0 244,0 292,0 472,0 634,0 861,0 166,0 192,0 246,0  Continuation Ⴇ N 52 N JZ-600-YC-PUR tear and coolant resistant, 0,6/1kV, Cu-screened, EMC-preferred type, meter marking  Part no. No.cores x Jacket cross-sec. colour mm² black 28397 5G1,5 28398 7G1,5 28399 12G1,5 28400 18G1,5 28401 25G1,5 28402 2x2,5 28403 3G2,5 28404 4G2,5 28405 5G2,5 28406 7G2,5 28407 12G2,5 28408 18G2,5 28409 25G2,5 28410 2x4 28411 3G4 28412 4G4 28413 5G4 28414 7G4 28415 3G6 28416 4G6 28417 5G6 28418 3G10 28419 4G10 28420 5G10 28421 3G16 28422 4G16 28423 5G16  AWG-No. 16 16 16 16 16 14 14 14 14 14 14 14 14 12 12 12 12 12 10 10 10 8 8 8 6 6 6 Outer Ø Cop. approx. mm weight kg/km 13,3 16,0 19,6 23,4 28,2 11,8 12,3 13,4 14,9 17,9 21,9 26,1 31,9 14,3 15,1 16,7 18,6 20,0 17,0 18,7 20,7 19,6 21,9 24,1 23,5 26,4 28,8 123,0 148,0 274,0 386,0 531,0 110,0 148,0 169,0 220,0 284,0 470,0 572,0 740,0 124,0 178,0 234,0 284,0 321,0 245,0 316,0 442,0 367,0 549,0 604,0 653,0 807,0 940,0 Weight approx. kg/km 294,0 392,0 599,0 817,0 1261,0 280,0 301,0 352,0 433,0 569,0 864,0 1365,0 1997,0 310,0 396,0 531,0 704,0 932,0 633,0 742,0 1117,0 1131,0 1357,0 1646,0 1397,0 1880,0 2721,0  Dimensions and specifications may be changed without prior notice. (RN01) N 53  Part no. No.cores x Jacket cross-sec. colour mm² grey 28457 5G1,5 28458 7G1,5 28459 12G1,5 28460 18G1,5 28461 25G1,5 28462 2x2,5 28463 3G2,5 28464 4G2,5 28465 5G2,5 28466 7G2,5 28467 12G2,5 28468 18G2,5 28469 25G2,5 28470 2x4 28471 3G4 28472 4G4 28473 5G4 28474 7G4 28475 3G6 28476 4G6 28477 5G6 28478 3G10 28479 4G10 28480 5G10 28481 3G16 28482 4G16 28483 5G16 AWG-No. 16 16 16 16 16 14 14 14 14 14 14 14 14 12 12 12 12 12 10 10 10 8 8 8 6 6 6 Outer Ø Cop. approx. mm weight kg/km 13,3 16,0 19,6 23,4 28,2 11,8 12,3 13,4 14,9 17,9 21,9 26,1 31,9 14,3 15,1 16,7 18,6 20,0 17,0 18,7 20,7 19,6 21,9 24,1 23,5 26,4 28,8 123,0 180,0 284,0 390,0 521,0 99,0 124,0 170,0 202,0 268,0 423,0 572,0 740,0 156,0 191,0 236,0 303,0 394,0 251,0 319,0 421,0 371,0 576,0 620,0 540,0 807,0 1394,0 Weight approx. kg/km 294,0 392,0 599,0 817,0 1261,0 280,0 301,0 352,0 433,0 569,0 864,0 1365,0 1997,0 310,0 396,0 531,0 704,0 932,0 633,0 742,0 1117,0 1131,0 1357,0 1646,0 1397,0 1880,0 2721,0 MEGAFLEX® 500 halogen-free, flame retardant, oil-resistant, UV-resistant, flexible, meter marking   Technical data Cable structure Properties Ⴠ Halogen-free flexible control cable, core-structure adapted to DIN VDE 0281 part14, to UL-Style 20939, UL-Std. 758 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage U0/U 300/500 V Ⴠ Test voltage 3000 V Ⴠ Minimum bending radius flexing approx. 10x cable ø fixed installation approx. 4x cable ø Ⴠ Flexible Alternate bending test according to DIN VDE 0281-2 Ⴠ Bare copper, fine wire conductors, to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Core insulation of halogen-free special polymer Ⴠ Black cores with white continuous numbering to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layer with optimal lay-length Ⴠ Outer sheath, halogen-free special polymer Ⴠ Outer jacket colour grey (RAL7001) Ⴠ with meter marking, change-over in 2011 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and are free from substances harmful to the wetting properties of lacquers  Ⴠ LS0H = Low Smoke Zero Halogen-free.  Ⴠ Halogen-free Ⴠ Highly flame-retardant Ⴠ Resistant to oils and greases Ⴠ Resistant to UV and weathering Ⴠ Hydrolysis resistant Ⴠ Flexible, abrasion- and wear-resistant Ⴠ Ozone-resistant Ⴠ Recycleable Tests Ⴠ Flame test to VDE0482-332-3/ BS4066 part3/ DIN EN60332-3/ IEC60332-3-24 (previously DINVDE0472 part804 test methodC) Ⴠ Self-extinguishing and flame retardant according to DINVDE0482-332-1-2, DIN EN/IEC60332-1 (previously DINVDE0472 part804 test methodB) Ⴠ Corrosiveness of combustion gases according to NFX10-702 Ⴠ Halogen-free according to DINVDE0482 part267/ EN50267-2-1/ IEC60754-1 (equivalent DINVDE0472 part815) Ⴠ Smoke density according to DINVDE0482 part1034-1+2, DINEN61034-1+2/ IEC61034-1+2, BS7622 part1+2 (previously DINVDE0472 part816) Ⴠ Oil-resistant to DIN EN 60811-2-1 Ⴠ Hydrolysis-resistant to DINEN61234-1 Ⴠ Ozone-resistant to DIN EN 60811-2-1 / DIN VDE 0281-2  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ Also available as a 0,6/1 kV cable under consideration of economical minimum quantities. MEGAFLEX® 600 Ⴠ screened analogue type: MEGAFLEX® 500-C, see page N 56  Application For fixed installation or flexible application, with free movements without forcing which do not constantly recur and without tensile stress, for high mechanical strain.As a measuring and control cable primarily in machinery and plant contruction, in building and air-conditoning systems, in warehousing and converying systems, in ship-building and for regenerative types of energy such as in the construction of wind power stations. Especially well-suited for use in public buildings, such as airports and train stations, where personal injuries and subsequent damage must be prevented in the event of a fire. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 13344 13345 13346 13347 13348 13349 13350 13351  No.cores x cross-sec. mm² 2x0,5 3G0,5 3x0,5 4G0,5 4x0,5 5G0,5 5x0,5 7G0,5 Outer Ø Cop. approx. mm weight kg/km 4,8 9,6 5,1 14,4 5,1 14,4 5,7 19,0 5,7 19,0 6,2 24,0 6,2 24,0 7,4 33,6 Weight approx. kg/km 43,0 50,0 50,0 60,0 60,0 71,0 71,0 84,0 AWG-No. 20 20 20 20 20 20 20 20  Part no. 13352 13353 13354 13355 13356 13357 13359 13360 No.cores x cross-sec. mm² 8G0,5 10G0,5 12G0,5 16G0,5 18G0,5 20G0,5 25G0,5 30G0,5 Outer Ø Cop. approx. mm weight kg/km 8,0 38,0 8,8 48,0 9,1 58,0 10,0 76,0 10,7 86,0 11,2 96,0 12,7 120,0 13,5 144,0 Weight approx. kg/km 101,0 121,0 142,0 183,0 204,0 227,0 283,0 324,0 AWG-No. 20 20 20 20 20 20 20 20  Continuation Ⴇ N 54 N MEGAFLEX® 500 halogen-free, flame retardant, oil-resistant, UV-resistant, flexible, meter marking  Part no. 13361 13362 13363 13364 13365 13366 13367 13368 13369 13370 13371 13372 13373 13374 13375 13376 13377 13378 13379 13380 13381 13382 13383 13384 13385 13386 13387 13388 13389 13390 13392 13393 13394 13395 13396 13397 13398 13399 13400 13401 13402 13403 13404 13405 13406 13407 13408 13409 13410 13411 13412 13413 13414 13415 13416 13417 13418 13419 13420 13421 13422 13423 13425 13426 13427 13428 13429 13430 13431 13432 13433 13434 13435 13436  No.cores x cross-sec. mm² 34G0,5 37G0,5 41G0,5 42G0,5 50G0,5 61G0,5 65G0,5 2x0,75 3G0,75 3x0,75 4G0,75 4x0,75 5G0,75 5x0,75 7G0,75 7x0,75 8G0,75 10G0,75 12G0,75 16G0,75 18G0,75 20G0,75 25G0,75 30G0,75 34G0,75 37G0,75 41G0,75 42G0,75 50G0,75 61G0,75 65G0,75 2x1 3G1 3x1 4G1 4x1 5G1 7G1 8G1 10G1 12G1 16G1 18G1 20G1 25G1 34G1 37G1 41G1 42G1 50G1 61G1 65G1 2x1,5 3G1,5 3x1,5 4G1,5 5G1,5 7G1,5 8G1,5 10G1,5 12G1,5 16G1,5 18G1,5 20G1,5 25G1,5 34G1,5 37G1,5 50G1,5 61G1,5 65G1,5 2x2,5 3G2,5 4G2,5 5G2,5 Outer Ø Cop. approx. mm weight kg/km 14,5 163,0 15,0 178,0 15,8 197,0 15,8 202,0 17,3 240,0 19,4 293,0 19,4 312,0 5,2 14,4 5,5 21,6 5,5 21,6 6,2 29,0 6,2 29,0 6,8 36,0 6,8 36,0 8,1 50,0 8,1 50,0 8,9 58,0 9,6 72,0 9,9 86,0 11,2 115,0 11,9 130,0 12,6 144,0 14,1 180,0 15,4 216,0 16,4 245,0 17,2 260,0 17,6 296,0 17,6 302,0 19,8 360,0 20,9 439,0 21,5 468,0 5,5 19,2 6,0 29,0 6,0 29,0 6,6 38,4 6,6 38,4 7,2 48,0 8,6 67,0 9,4 77,0 10,4 96,0 10,7 115,0 12,0 154,0 12,7 173,0 13,5 192,0 15,2 240,0 17,4 326,0 18,4 355,0 18,9 394,0 18,9 403,0 21,0 480,0 22,2 586,0 22,8 628,0 6,1 29,0 6,5 43,0 6,5 43,0 7,2 58,0 7,9 72,0 9,5 101,0 10,4 115,0 11,3 144,0 11,7 173,0 13,3 230,0 14,0 259,0 14,9 288,0 16,8 360,0 19,4 490,0 20,2 533,0 23,4 720,0 24,8 878,0 26,0 936,0 7,6 48,0 8,3 72,0 9,1 96,0 10,2 120,0 Weight approx. kg/km 367,0 381,0 417,0 454,0 519,0 635,0 694,0 47,0 56,0 56,0 69,0 69,0 83,0 83,0 114,0 114,0 136,0 172,0 183,0 241,0 266,0 291,0 374,0 450,0 517,0 541,0 611,0 621,0 742,0 853,0 909,0 63,0 74,0 74,0 90,0 90,0 109,0 151,0 184,0 224,0 243,0 314,0 361,0 387,0 496,0 670,0 713,0 784,0 824,0 952,0 1140,0 1201,0 70,0 94,0 94,0 112,0 141,0 191,0 224,0 282,0 311,0 392,0 450,0 497,0 630,0 842,0 897,0 1277,0 1460,0 1612,0 118,0 151,0 181,0 224,0 AWG-No.  Dimensions and specifications may be changed without prior notice. (RA03) N 55 20 20 20 20 20 20 20 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 14 14 14 14  Part no. 13437 13438 13439 13440 13441 13442 13443 13444 13445 13446 13447 13448 13449 13450 13451 13452 13453 13454 13455 13456 13457 13458 13459 13460 13461 13462 13463 13464 13465 13466 13467 13468 13469 13470 13471 13472 13473 13474 13475 13476 13477 13478 13479 13480 13481 13482 13483 13484 13485 13486 13487 13488 13489 No.cores x cross-sec. mm² 7G2,5 8G2,5 10G2,5 12G2,5 16G2,5 18G2,5 20G2,5 25G2,5 30G2,5 2x4 3G4 4G4 5G4 7G4 8G4 10G4 12G4 16G4 18G4 2x6 3G6 4G6 5G6 7G6 2x10 3G10 4G10 5G10 7G10 2x16 3G16 4G16 5G16 7G16 3G25 4G25 5G25 3G35 4G35 5G35 3G50 4G50 5G50 3G70 4G70 5G70 3G95 4G95 5G95 3G120 4G120 3G150 4G150 Outer Ø Cop. approx. mm weight kg/km 12,1 168,0 13,2 192,0 14,6 240,0 15,2 288,0 16,8 384,0 18,1 432,0 19,0 480,0 22,2 600,0 22,9 720,0 9,2 77,0 9,9 115,0 11,0 154,0 12,1 192,0 13,3 269,0 15,9 307,0 17,3 384,0 18,3 461,0 20,2 614,0 21,8 691,0 10,8 115,0 11,7 173,0 13,0 230,0 14,5 288,0 16,0 403,0 14,0 192,0 15,0 288,0 16,8 384,0 18,7 480,0 20,6 672,0 16,5 307,0 17,6 461,0 19,7 641,0 21,9 768,0 24,4 1075,0 22,5 720,0 25,2 960,0 27,9 1200,0 26,3 1008,0 29,2 1344,0 32,7 1680,0 31,5 1440,0 35,0 1920,0 38,7 2400,0 37,2 2016,0 42,2 2688,0 47,4 3360,0 42,1 2736,0 47,0 3648,0 52,3 4560,0 46,6 3456,0 51,4 4608,0 53,0 4320,0 59,0 5760,0 Weight approx. kg/km 316,0 370,0 451,0 499,0 720,0 769,0 911,0 1047,0 1280,0 199,0 247,0 299,0 369,0 463,0 601,0 698,0 790,0 1130,0 1280,0 266,0 360,0 429,0 529,0 631,0 440,0 550,0 708,0 862,0 1124,0 642,0 830,0 1060,0 1270,0 1794,0 1190,0 1594,0 2014,0 1590,0 2200,0 2693,0 2571,0 3087,0 3980,0 3207,0 4077,0 5501,0 4708,0 5590,0 6972,0 5515,0 7100,0 6279,0 7781,0 AWG-No. 14 14 14 14 14 14 14 14 14 12 12 12 12 12 12 12 12 12 12 10 10 10 10 10 8 8 8 8 8 6 6 6 6 6 4 4 4 2 2 2 1 1 1 2/0 2/0 2/0 3/0 3/0 3/0 4/0 4/0 300 kcmil 300 kcmil MEGAFLEX® 500-C halogen-free, flame retardant, oil-resistant, UV-resistant, flexible, screened, EMC-preferred types, meter marking   Technical data Cable structure Properties Ⴠ Halogen-free flexible control cable, core-structure adapted to DINVDE0281 part14, to UL-Style 20939, UL-Std. 758 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage U0/U 300/500 V Ⴠ Test voltage 3000 V Ⴠ Minimum bending radius flexing approx. 10x cable ø fixed installation approx. 4x cable ø Ⴠ Flexible Alternate bending test according to DIN VDE 0281-2 Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, fine wire conductors, to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Core insulation of halogen-free special polymer Ⴠ Black cores with white continuous numbering to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layer with optimal lay-length Ⴠ Separating foil Ⴠ Tinned copper braided screening, coverage approx. 85% Ⴠ Outer sheath, halogen-free special polymer Ⴠ Outer jacket colour grey (RAL7001) Ⴠ with meter marking, change-over in 2011 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and are free from substances harmful to the wetting properties of lacquers  Ⴠ LS0H = Low Smoke Zero Halogen-free.  Ⴠ Halogen-free Ⴠ Highly flame-retardant Ⴠ Resistant to oils and greases Ⴠ Resistant to UV and weathering Ⴠ Flexible, abrasion- and wear-resistant Ⴠ Ozone-resistant Ⴠ Recycleable Tests Ⴠ Flame test to VDE0482-332-3/ BS4066 part3/ DIN EN60332-3/IEC60332-3 (previously DINVDE0472 part804 test methodC) Ⴠ Self-extinguishing and flame retardant according to DINVDE0482-332-1-2, DIN EN/IEC60332-1 (previously DINVDE0472 part804 test methodB) Ⴠ Corrosiveness of combustion gases according to NFX10-702 Halogen-free according to DINVDE0482 part267/ EN50267-2-1/ IEC60754-1 (equivalent DINVDE0472 part815) Ⴠ Smoke density according to DINVDE0482 part1034-1+2, DINEN61034-1+2/ IEC61034-1+2, BS7622 part1+2 (previously DINVDE0472 part816) Ⴠ Oil-resistant to DIN 60811-2-1  Ⴠ hydrolysebeständig nach DINEN61234-1 Ⴠ Ozone-resistant to DIN EN 60811-2-1 / DIN VDE 0281-2  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ unscreened analogue type: MEGAFLEX® 500, see page N 54  Application For fixed installation or flexible application, with free movements without forcing which do not constantly recur and without tensile stress, for high mechanical strain.An interference-free transmission of signals and pulse in assured by the high degree of screening. As a measuring and control cable primarily in machinery and plant contruction, in building and air-conditoning systems, in warehousing and converying systems, in ship-building and for regenerative types of energy such as in the construction of wind power stations. Especially well-suited for use in public buildings, such as airports and train stations, where personal injuries and subsequent damage must be prevented in the event of a fire. EMC = Electromagnetic compatibillity = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 13500 13501 13502 13504 13503 13505 13506 13507  No.cores x cross-sec. mm² 2x0,5 3G0,5 3x0,5 4x0,5 4G0,5 5G0,5 5x0,5 7G0,5 Outer Ø Cop. approx. mm weight kg/km 5,7 35,0 6,0 42,0 6,0 42,0 6,5 47,0 6,5 47,0 7,0 56,0 7,0 56,0 7,9 69,0 Weight approx. kg/km 46,0 56,0 56,0 62,0 62,0 75,0 75,0 98,0 AWG-No. 20 20 20 20 20 20 20 20  Part no. 13508 13509 13510 13511 13512 13514 13515 No.cores x cross-sec. mm² 8G0,5 10G0,5 12G0,5 16G0,5 18G0,5 20G0,5 25G0,5 Outer Ø Cop. approx. mm weight kg/km 8,5 80,0 9,3 94,0 9,6 108,0 10,7 129,0 11,2 145,0 11,9 172,0 13,4 240,0 Weight approx. kg/km 116,0 135,0 158,0 210,0 216,0 240,0 315,0 AWG-No. 20 20 20 20 20 20 20  Continuation Ⴇ N 56 N MEGAFLEX® 500-C halogen-free, flame retardant, oil-resistant, UV-resistant, flexible, screened, EMC-preferred types, meter marking  Part no. 13516 13517 13518 13519 13520 13521 13522 13523 13524 13525 13526 13527 13528 13529 13530 13531 13532 13533 13534 13535 13536 13537 13538 13539 13540 13541 13542 13543 13544 13545 13546 13547 13548 13549 13550 13552 13554 13556 13557 13558 13559 13560 13561 13562 13563 13565  No.cores x cross-sec. mm² 2x0,75 3G0,75 3x0,75 4G0,75 4x0,75 5G0,75 5x0,75 7G0,75 7x0,75 8G0,75 10G0,75 12G0,75 16G0,75 18G0,75 20G0,75 25G0,75 2x1 3G1 3x1 4G1 4x1 5G1 7G1 8G1 10G1 12G1 16G1 18G1 20G1 25G1 2x1,5 3G1,5 3x1,5 4G1,5 5G1,5 7G1,5 8G1,5 10G1,5 12G1,5 16G1,5 18G1,5 20G1,5 25G1,5 2x2,5 3G2,5 4G2,5 Outer Ø Cop. approx. mm weight kg/km 6,1 40,0 6,4 52,0 6,4 52,0 6,9 60,0 6,9 60,0 7,4 71,0 7,4 71,0 8,6 91,0 8,6 91,0 9,4 110,0 10,2 137,0 10,4 142,0 11,6 200,0 12,4 212,0 12,9 238,0 14,8 281,0 6,4 50,0 6,7 60,0 6,7 60,0 7,3 71,0 7,3 71,0 7,8 88,0 9,1 111,0 9,9 127,0 10,8 150,0 11,2 184,0 12,3 209,0 13,2 260,0 13,8 317,0 15,8 349,0 6,6 63,0 6,9 80,0 6,9 80,0 7,5 97,0 8,4 119,0 10,0 147,0 10,7 170,0 11,8 193,0 12,1 267,0 13,6 315,0 14,6 374,0 15,3 396,0 17,9 526,0 8,3 96,0 9,0 144,0 9,8 148,0 Weight approx. kg/km 60,0 68,0 68,0 78,0 78,0 95,0 95,0 130,0 130,0 145,0 180,0 203,0 275,0 290,0 320,0 413,0 66,0 80,0 80,0 100,0 100,0 130,0 160,0 197,0 232,0 260,0 346,0 382,0 440,0 540,0 88,0 100,0 100,0 125,0 158,0 210,0 244,0 315,0 340,0 424,0 480,0 545,0 702,0 132,0 168,0 195,0 AWG-No.  Dimensions and specifications may be changed without prior notice. (RA03) N 57 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 17 17 17 17 17 17 17 17 17 17 17 17 17 17 16 16 16 16 16 16 16 16 16 16 16 16 16 14 14 14  Part no. 13566 13567 13568 13569 13570 13571 13572 13573 13574 13575 13576 13577 13578 13579 13580 13581 13582 13583 13584 13585 13586 13587 13588 13589 13590 13591 13592 13593 13594 13595 13596 13597 No.cores x cross-sec. mm² 5G2,5 7G2,5 8G2,5 10G2,5 12G2,5 2x4 3G4 4G4 5G4 7G4 2x6 3G6 4G6 5G6 7G6 2x10 3G10 4G10 5G10 7G10 2x16 3G16 4G16 5G16 7G16 4G25 4x35 4G50 4G70 4G95 4G120 4G150 Outer Ø Cop. approx. mm weight kg/km 10,9 181,0 12,9 255,0 13,8 285,0 15,8 340,0 15,9 441,0 9,8 120,0 10,6 174,0 11,5 230,0 12,7 273,0 13,9 316,0 11,5 173,0 12,4 240,0 13,8 305,0 15,7 439,0 16,6 505,0 14,9 255,0 15,9 350,0 17,8 535,0 19,6 592,0 21,6 810,0 17,3 422,0 18,5 585,0 20,8 740,0 22,9 895,0 25,0 1282,0 26,2 1140,0 30,4 1576,0 34,6 2155,0 41,3 3120,0 46,2 4043,0 51,0 5069,0 59,0 5792,0 Weight approx. kg/km 256,0 345,0 390,0 482,0 572,0 220,0 251,0 305,0 388,0 504,0 270,0 351,0 464,0 546,0 670,0 461,0 574,0 785,0 914,0 1308,0 670,0 911,0 1105,0 1293,0 2149,0 1911,0 2542,0 3550,0 4939,0 6690,0 8453,0 9104,0 AWG-No. 14 14 17 14 14 12 12 12 12 12 10 10 10 10 10 8 8 8 8 8 6 6 6 6 6 4 2 1 2/0 3/0 4/0 300 kcmil MEGAFLEX® 600 halogen-free, flame retardant, oil-reistant, UV-resistant, flexible, meter marking   Technical data Cable structure Properties Ⴠ Halogen-free flexible control cable to UL-Style 20234, UL-Std. 758 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage U0/U 0,6/1 kV Ⴠ Test voltage 4000 V Ⴠ Minimum bending radius flexing approx. 10x cable ø fixed installation approx. 4x cable ø Ⴠ Flexible Alternate bending test according to DIN VDE 0281-2 Ⴠ Bare copper, fine wire conductors, to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Core insulation of halogen-free special polymer Ⴠ Black cores with white continuous numbering to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layer with optimal lay-length Ⴠ Outer sheath, halogen-free special polymer Ⴠ Outer jacket colour black (RAL9005) Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and are free from substances harmful to the wetting properties of lacquers Ⴠ with meter marking, change-over in 2011 Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ  Halogen-free Highly flame-retardant Resistant to oils and greases Resistant to UV and weathering Hydrolysis resistant Flexible, abrasion- and wear-resistant Ozone-resistant Recycleable Tests Flame test to VDE0482-332-3/BS 4066 part3/ DINEN 60332-3/ IEC60332-3-24 (previously DINVDE0472 part804 test methodC) Self-extinguishing and flame retardant according to DINVDE0482-332-1-2, DIN EN/IEC60332-1 (previously DINVDE0472 part804 test methodB) Corrosiveness of combustion gases according to NFX10-702 Halogen-free according to DINVDE0482 part267/ EN50267-2-1/ IEC60754-1 (equivalent DINVDE0472 part815) Smoke density according to DINVDE0482 part1034-1+2, DINEN61034-1+2/ IEC61034-1+2, BS7622 part1+2 (previously DINVDE0472 part816) Oil-resistant to DIN EN 60811-2-1 Hydrolysis-resistant to DINEN61234-1 Ozone-resistant to DINEN60811-2-1 / DINVDE0281-2 Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core. Ⴠ screened analogue type: MEGAFLEX® 600-C, see page N 60  Application For fixed installation or flexible application, with free movements without forcing which do not constantly recur and without tensile stress, for high mechanical strain.As a measuring and control cable primarily in machinery and plant contruction, in building and air-conditoning systems, in warehousing and converying systems, in ship-building and for regenerative types of energy such as in the construction of wind power stations. Especially well-suited for use in public buildings, such as airports and train stations, where personal injuries and subsequent damage must be prevented in the event of a fire. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 13200 13202 13201 13203 13204 13205 13206 13207  No.cores x cross-sec. mm² 2x0,5 3x0,5 3G0,5 4G0,5 4x0,5 5G0,5 5x0,5 7G0,5 Outer Ø Cop. approx. mm weight kg/km 6,4 9,6 6,8 14,4 6,8 14,4 7,6 19,0 7,6 19,0 8,2 24,0 8,2 24,0 9,8 33,6 Weight approx. kg/km 56,0 68,0 68,0 100,0 100,0 117,0 117,0 138,0 AWG-No. 20 20 20 20 20 20 20 20  Part no. 13208 13209 13210 13211 13212 13213 13214 13215 No.cores x cross-sec. mm² 8G0,5 10G0,5 12G0,5 16G0,5 18G0,5 20G0,5 25G0,5 30G0,5 Outer Ø Cop. approx. mm weight kg/km 10,7 38,0 11,6 48,0 12,2 58,0 13,7 76,0 14,4 86,0 15,3 96,0 17,2 120,0 18,0 144,0 Weight approx. kg/km 150,0 176,0 200,0 250,0 276,0 293,0 335,0 348,0 AWG-No. 20 20 20 20 20 20 20 20  Continuation Ⴇ N 58 N MEGAFLEX® 600 halogen-free, flame retardant, oil-reistant, UV-resistant, flexible, meter marking  Part no. 13216 13217 13218 13219 13220 13221 13222 13223 13224 13225 13226 13227 13228 13229 13230 13231 13232 13233 13234 13235 13236 13237 13238 13239 13241 13242 13243 13244 13245 13246 13247 13248 13249 13250 13251 13252 13253 13254 13255 13256 13257 13258 13259 13260 13261 13262 13263 13264 13265 13266 13267 13268 13269 13270 13271 13272 13273 13274 13275 13276 13277 13278 13279 13280  No.cores x cross-sec. mm² 34G0,5 37G0,5 41G0,5 42G0,5 50G0,5 61G0,5 65G0,5 2x0,75 3G0,75 3x0,75 4G0,75 4x0,75 5G0,75 5x0,75 7G0,75 7x0,75 8G0,75 10G0,75 12G0,75 16G0,75 18G0,75 20G0,75 25G0,75 30G0,75 34G0,75 37G0,75 41G0,75 42G0,75 50G0,75 61G0,75 65G0,75 2x1 3G1 3x1 4G1 4x1 5G1 7G1 8G1 10G1 12G1 16G1 18G1 20G1 25G1 34G1 37G1 41G1 42G1 50G1 61G1 65G1 2x1,5 3G1,5 3x1,5 4G1,5 5G1,5 7G1,5 8G1,5 10G1,5 12G1,5 16G1,5 18G1,5 20G1,5 Outer Ø Cop. approx. mm weight kg/km 19,8 163,0 15,0 178,0 21,3 197,0 21,2 202,0 23,4 240,0 26,0 293,0 26,8 312,0 6,8 14,4 7,2 21,6 7,2 21,6 8,0 29,0 8,0 29,0 8,8 36,0 8,8 36,0 10,7 50,0 10,7 50,0 11,5 58,0 12,7 72,0 13,1 86,0 14,6 115,0 15,6 130,0 16,6 144,0 18,9 180,0 15,4 216,0 21,5 245,0 21,5 260,0 23,2 296,0 23,2 302,0 25,6 360,0 28,2 439,0 29,0 468,0 7,4 19,2 8,0 29,0 8,0 29,0 8,8 38,4 8,8 38,4 9,8 48,0 11,7 67,0 12,8 77,0 14,3 96,0 14,5 115,0 16,5 154,0 17,3 173,0 18,4 192,0 21,1 240,0 24,0 326,0 24,3 355,0 25,9 394,0 25,9 403,0 28,5 480,0 31,4 586,0 32,5 628,0 8,4 29,0 9,1 43,0 9,1 43,0 9,9 58,0 11,0 72,0 13,3 101,0 14,5 115,0 16,1 144,0 16,6 173,0 18,5 230,0 19,7 259,0 20,9 288,0 Weight approx. kg/km 520,0 561,0 590,0 595,0 715,0 840,0 880,0 66,0 74,0 74,0 126,0 126,0 140,0 140,0 190,0 190,0 212,0 238,0 257,0 304,0 362,0 394,0 486,0 450,0 638,0 696,0 750,0 770,0 895,0 1070,0 1110,0 80,0 96,0 96,0 100,0 100,0 130,0 170,0 230,0 270,0 290,0 360,0 405,0 450,0 570,0 750,0 790,0 890,0 900,0 1100,0 1266,0 1560,0 95,0 112,0 112,0 139,0 170,0 225,0 250,0 300,0 370,0 450,0 520,0 600,0 AWG-No.  Dimensions and specifications may be changed without prior notice. (RA03) N 59 20 20 20 20 20 20 20 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 16 16 16 16 16 16 16 16 16 16 16 16  Part no. 13281 13282 13283 13284 13285 13286 13287 13288 13289 13290 13291 13292 13293 13294 13295 13296 13297 13298 13299 13300 13301 13302 13303 13304 13305 13306 13307 13308 13309 13310 13311 13312 13313 13314 13315 13316 13317 13318 13319 13320 13321 13322 13323 13324 13325 13326 13327 13328 13329 13330 13331 13332 13333 13334 13335 13336 13337 13338 13339 13340 13341 13342 13343 No.cores x cross-sec. mm² 25G1,5 34G1,5 37G1,5 50G1,5 61G1,5 65G1,5 2x2,5 3G2,5 4G2,5 5G2,5 7G2,5 8G2,5 10G2,5 12G2,5 16G2,5 18G2,5 20G2,5 25G2,5 30G2,5 2x4 3G4 4G4 5G4 7G4 8G4 10G4 12G4 16G4 18G4 2x6 3G6 4G6 5G6 7G6 2x10 3G10 4G10 5G10 7G10 2x16 3G16 4G16 5G16 7G16 3G25 4G25 5G25 3G35 4G35 5G35 3G50 4G50 5G50 3G70 4G70 5G70 3G95 4G95 5G95 3G120 4G120 3G150 4G150 Outer Ø Cop. approx. mm weight kg/km 23,9 360,0 27,2 490,0 29,4 533,0 32,5 720,0 35,7 878,0 36,8 936,0 9,4 48,0 9,9 72,0 11,1 96,0 12,4 120,0 15,0 168,0 16,1 192,0 17,0 240,0 18,4 288,0 19,4 384,0 22,0 432,0 32,2 480,0 26,9 600,0 28,1 720,0 11,4 77,0 12,3 115,0 13,8 154,0 15,3 192,0 16,8 269,0 20,0 307,0 21,6 384,0 22,9 461,0 23,6 614,0 24,2 691,0 13,1 115,0 14,1 173,0 15,6 230,0 17,3 288,0 19,3 403,0 15,4 192,0 16,5 288,0 18,1 384,0 20,5 480,0 22,5 672,0 18,3 307,0 19,6 461,0 21,7 641,0 24,2 768,0 25,7 1075,0 24,0 720,0 26,9 960,0 29,4 1200,0 26,2 1008,0 29,4 1344,0 32,8 1680,0 31,6 1440,0 35,5 1920,0 40,0 2400,0 36,7 2016,0 40,7 2688,0 45,7 3360,0 41,2 2736,0 46,2 3648,0 50,7 4560,0 45,9 3456,0 50,3 4608,0 52,7 4320,0 58,8 5760,0 Weight approx. kg/km 730,0 950,0 1094,0 1400,0 1700,0 1900,0 160,0 175,0 203,0 251,0 330,0 400,0 461,0 553,0 742,0 795,0 924,0 1110,0 1370,0 180,0 230,0 310,0 410,0 540,0 710,0 760,0 860,0 910,0 980,0 205,0 370,0 430,0 650,0 860,0 330,0 660,0 790,0 960,0 1300,0 580,0 700,0 1100,0 1600,0 1890,0 1450,0 1600,0 2050,0 1900,0 2400,0 2900,0 2700,0 3400,0 4361,0 3300,0 4400,0 5807,0 5050,0 6010,0 7752,0 5620,0 7500,0 6390,0 6840,0 AWG-No. 16 16 16 16 16 16 14 14 14 14 14 14 14 14 14 14 14 14 14 12 12 12 12 12 12 12 12 12 12 10 10 10 10 10 8 8 8 8 8 6 6 6 6 6 4 4 4 2 2 2 1 1 1 2/0 2/0 2/0 3/0 3/0 3/0 4/0 4/0 300 kcmil 300 kcmil MEGAFLEX® 600-C halogen-free, flame retardant, oil-resistant, UV-resistant, flexible, meter marking   Technical data Cable structure Properties Ⴠ Halogen-free flexible control cable to UL-Style20234, UL-Std. 758 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage U0/U 0,6/1 kV Ⴠ Test voltage 4000 V Ⴠ Minimum bending radius flexing approx. 10x cable ø fixed installation approx. 4x cable ø Ⴠ Flexible Alternate bending test according to DIN VDE 0281-2 Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, fine wire conductors, to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Core insulation of halogen-free special polymer Ⴠ Black cores with white continuous numbering to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layer with optimal lay-length Ⴠ Separating foil Ⴠ Tinned copper braided screening, coverage approx. 85% Ⴠ Outer sheath, halogen-free special polymer Ⴠ Outer jacket colour black (RAL9005) Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and are free from substances harmful to the wetting properties of lacquers Ⴠ with meter marking, change-over in 2011 Ⴠ Halogen-free Ⴠ Highly flame-retardant Ⴠ Resistant to oils and greases Ⴠ Resistant to UV and weathering Ⴠ Flexible, abrasion- and wear-resistant Ⴠ Ozone-resistant Ⴠ Recycleable Tests Ⴠ Flame test to VDE0482-332-3/ BS4066 part3/ DIN EN 60332-3/IEC60332-3-24 (previously DINVDE0472 part804 test methodC) Ⴠ Self-extinguishing and flame retardant according to DINVDE0482-332-1-2, DIN EN/IEC60332-1 (previously DINVDE0472 part804 test methodB) Ⴠ Corrosiveness of combustion gases according to NFX10-702 Halogen-free according to DINVDE0482 part267/ EN50267-2-1/ IEC60754-1 (equivalent DINVDE0472 part815) Ⴠ Smoke density according to DINVDE0482 part1034-1+2, DINEN61034-1+2/ IEC61034-1+2, BS7622 part1+2 (previously DINVDE0472 part816) Ⴠ Oil-resistant to DIN EN 60811-2-1 Ⴠ hydrolysebeständig nach DINEN61234-1 Ⴠ Ozone-resistant to DIN EN 60811-2-1 / DIN VDE 0281-2  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core. Ⴠ unscreened analogue type: MEGAFLEX® 600, see page N 58  Application For fixed installation or flexible application, with free movements without forcing which do not constantly recur and without tensile stress, for high mechanical strain.An interference-free transmission of signals and pulse in assured by the high degree of screening. As a measuring and control cable primarily in machinery and plant contruction, in building and air-conditoning systems, in warehousing and converying systems, in ship-building and for regenerative types of energy such as in the construction of wind power stations. Especially well-suited for use in public buildings, such as airports and train stations, where personal injuries and subsequent damage must be prevented in the event of a fire. EMC = Electromagnetic compatibillity = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 15217 15218 15219 15220 15221 15222 15223 15224  No.cores x cross-sec. mm² 2x0,5 3G0,5 3x0,5 4G0,5 4x0,5 5G0,5 5x0,5 7G0,5 Outer Ø Cop. approx. mm weight kg/km 6,9 35,0 7,3 42,0 7,3 42,0 8,1 47,0 8,1 47,0 8,7 56,0 8,7 56,0 10,3 69,0 Weight approx. kg/km 46,0 56,0 56,0 62,0 62,0 75,0 75,0 98,0 AWG-No. 20 20 20 20 20 20 20 20  Part no. 15225 15226 15227 15228 15229 15230 15231 15232 No.cores x cross-sec. mm² 10G0,5 12G0,5 18G0,5 20G0,5 25G0,5 2x0,75 3G0,75 3x0,75 Outer Ø Cop. approx. mm weight kg/km 12,1 94,0 12,7 108,0 14,9 145,0 15,8 172,0 17,7 240,0 7,3 40,0 7,7 52,0 7,7 52,0 Weight approx. kg/km 135,0 158,0 216,0 240,0 315,0 60,0 68,0 68,0 AWG-No. 20 20 20 20 20 18 18 18  Continuation Ⴇ N 60 N MEGAFLEX® 600-C halogen-free, flame retardant, oil-resistant, UV-resistant, flexible, meter marking  Part no. 15233 15234 15235 15236 15237 15238 15239 15240 15241 15242 15243 15244 15245 15247 15246 15248 15249 15250 15251 15252 15253 15254 15255 15256 15257 15258  No.cores x cross-sec. mm² 4G0,75 4x0,75 5G0,75 5x0,75 7G0,75 7x0,75 12G0,75 18G0,75 20G0,75 25G0,75 2x1 3G1 3x1 4G1 4G1 5G1 10G1 12G1 18G1 20G1 25G1 2x1,5 3G1,5 3x1,5 4G1,5 5G1,5 Outer Ø Cop. approx. mm weight kg/km 8,5 60,0 8,5 60,0 9,3 71,0 9,3 71,0 10,7 91,0 10,7 91,0 13,1 142,0 16,2 212,0 17,2 238,0 19,5 281,0 8,0 50,0 8,6 60,0 8,6 60,0 9,4 71,0 9,4 71,0 10,4 88,0 14,9 150,0 14,5 184,0 17,9 260,0 19,0 317,0 21,7 349,0 9,0 63,0 9,7 80,0 9,7 80,0 10,5 97,0 11,6 119,0 Weight approx. kg/km 78,0 78,0 95,0 95,0 130,0 130,0 203,0 290,0 320,0 413,0 66,0 80,0 80,0 100,0 100,0 130,0 232,0 260,0 382,0 440,0 540,0 88,0 100,0 100,0 125,0 158,0 AWG-No.  Dimensions and specifications may be changed without prior notice. (RA03) N 61 18 18 18 18 18 18 18 18 18 18 17 17 17 17 17 17 17 17 17 17 17 16 16 16 16 16  Part no. 15259 15260 15261 15262 15263 15264 15265 15266 15267 15268 15269 15270 15271 15272 15273 15274 15275 15276 15277 15278 15279 15280 15281 15282 15283 No.cores x cross-sec. mm² 7G1,5 10G1,5 12G1,5 18G1,5 20G1,5 25G1,5 2x2,5 3G2,5 4G2,5 5x2,5 7G2,5 10G2,5 12G2,5 3G4 4G4 5G4 7G4 3G6 4G6 5G6 7G6 3G10 4G10 5G10 7G10 Outer Ø Cop. approx. mm weight kg/km 13,9 147,0 16,7 193,0 17,2 267,0 20,5 374,0 21,7 396,0 24,7 526,0 10,2 96,0 10,7 144,0 11,9 148,0 13,2 181,0 15,8 255,0 17,0 340,0 19,2 441,0 13,1 174,0 14,6 230,0 16,1 273,0 17,6 316,0 14,9 240,0 16,4 305,0 18,1 439,0 20,1 505,0 16,6 350,0 18,1 535,0 20,6 592,0 22,6 810,0 Weight approx. kg/km 210,0 315,0 340,0 480,0 545,0 702,0 132,0 168,0 195,0 256,0 345,0 482,0 572,0 251,0 305,0 388,0 504,0 351,0 464,0 546,0 670,0 574,0 785,0 914,0 1308,0 AWG-No. 16 16 16 16 16 16 14 14 14 14 14 14 14 12 12 12 12 10 10 10 10 8 8 8 8 MULTIFLEX 600 highly flexible, oil-resistant, open installation TC-ER, PLTC-ER, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ Highly-flexible PVC control cable according to UL Standard 1277 Ⴠ Temperature range Flexing -5 °C to +90 °C Fixed installation -40 °C to +90 °C Ⴠ Nominal voltage TC 600 V TC Wind Turbine (WTTC) 1000 V Ⴠ Test voltage 3000 V Ⴠ Minimum bending radius Permanently flexing 7,5x cable ø Ⴠ Insulation resistance Min. 20 MOhm x km Ⴠ Radiation resistance Up to 80x106 cJ/kg(up to 80 Mrad)  Ⴠ Bare copper conductor, extra-fine wire stranded, with AWG measures Ⴠ Special PVC core insulation with transparent nylon skin Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer (3 cores and more) Ⴠ Cores stranded in layers with optimal lay-lengths Ⴠ Separator Ⴠ Special PVC outer sheath Ⴠ Sheath colour - black (RAL 9005) Ⴠ With length marking in feet Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Ⴠ UV-resistant Ⴠ Tests UL: TC-ER, PLTC-ER (AWG 18 - AWG 12), ITC-ER (AWG 18 - AWG 12), MTW, NFPA 79 2007. WTTC 1000 V, DP-1, OIL RES I&II, 90 °C dry / 75 °C wet, Class 1 Div. 2 per NEC Art 336, 392, 501, crush impact test in accordance withUL 1277 CSA: c(UL) CIC-TC FT4, CSA AWM I/II A/B FT4  Note Advantages Ⴠ Highly-flexible, simple installation Available on request Ⴠ with blue cores (DC) Ⴠ with red cores (AC) Ⴠ Grey or TPE outer sheath  Application HELUKABEL®MULTIFLEX 600 is a highly-flexible, oil-resistant control cable. The special combination of TC-ER, PLTC-ER and ITC-ER allows this cable to be used as a connecting cable for industrial plant and machinery in accordance with NFPA 79 2007. Approved for open, unprotected installation in cable trays to the machine. Its outstanding oil resistance (OIL RES I & II) guarantees a long service life; for industrial applications in dry, damp and wet environments. Recommended applications: production lines, bottling plants, machine construction, switch cabinets, conveyor systems, packaging machines, automotive industry. Please observe applicable installation regulations for use in energy supply chains. = The product conforms to the EG Low-Voltage Directive 2006/95/EG   Part no. 62502 62503 62504 62505 62506 62507 62508 62509 62510 62511 62512 62513 62514 62515 62516 62517 62518 62519 62520 62521 62522 62523 62524 62525 62526 62527 62528  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 12G0,5 18G0,5 25G0,5 34G0,5 3G0,75 4G0,75 5G0,75 7G0,75 12G0,75 15G0,75 18G0,75 25G0,75 34G0,75 36G0,75 42G0,75 3G1,5 4G1,5 5G1,5 7G1,5 9G1,5 12G1,5 18G1,5 AWG-No. Outer Ø approx. mm 20 6,9 20 7,3 20 8,0 20 8,6 20 9,9 20 11,4 20 14,2 20 17,0 20 18,9 18 7,8 18 8,6 18 9,3 18 10,8 18 12,4 18 13,8 18 15,4 18 18,5 18 20,5 18 20,6 18 22,3 16 8,6 16 9,5 16 10,3 16 12,0 16 14,2 16 14,7 16 17,2 Cop. weight kg/km 10,0 14,0 19,0 24,0 34,0 58,0 86,0 120,0 163,0 22,0 29,0 36,0 50,0 86,0 108,0 130,0 180,0 245,0 259,0 302,0 43,0 58,0 72,0 101,0 130,0 173,0 259,0 Weight approx. kg/km 53,0 61,0 72,0 85,0 110,0 158,0 241,0 316,0 439,0 75,0 91,0 103,0 136,0 228,0 273,0 311,0 498,0 550,0 570,0 600,0 100,0 122,0 148,0 197,0 244,0 328,0 459,0  Part no. 62529 62530 62531 62532 62533 62534 63136 62535 62536 62537 62538 62539 62540 62541 62542 62543 62544 62545 62546 62547 62548 62549 62550 62551 62552 62554 No.cores x cross-sec. mm² 25G1,5 34G1,5 41G1,5 50G1,5 60G1,5 3G2,5 4G2,5 5G2,5 7G2,5 9G2,5 12G2,5 18G2,5 25G2,5 3G4 4G4 5G4 7G4 4G6 5G6 7G6 4G10 5G10 4G16 5G16 4G25 4G35 AWG-No. Outer Ø approx. mm 16 20,8 16 23,0 16 25,1 16 27,7 16 29,5 14 9,8 14 10,6 14 11,9 14 13,6 14 16,1 14 16,9 14 20,1 14 25,1 12 11,3 12 12,4 12 13,8 12 16,9 10 15,3 10 16,6 10 18,2 8 19,7 8 22,0 6 23,7 6 26,1 4 34,0 2 37,0 Cop. weight kg/km 360,0 490,0 590,0 720,0 864,0 72,0 96,0 120,0 168,0 216,0 288,0 432,0 600,0 115,0 154,0 192,0 269,0 230,0 288,0 403,0 384,0 480,0 614,0 768,0 960,0 1344,0 Weight approx. kg/km 665,0 1084,0 1260,0 1521,0 1885,0 160,0 173,0 268,0 307,0 437,0 572,0 800,0 1100,0 221,0 247,0 318,0 438,0 383,0 481,0 800,0 671,0 990,0 951,0 1500,0 1700,0 2300,0  Dimensions and specifications may be changed without prior notice. (RN01) N 62 N MULTIFLEX 600-C highly-flexible, oil-resistant, screened, EMC-preferred type, control cable for open installation TC-ER, PLTC-ER, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ Highly-flexible PVC control cable according to UL Standard 1277 Ⴠ Temperature range Flexing -5 °C to +90 °C Fixed installation -40 °C to +90 °C Ⴠ Nominal voltage TC 600 V TC Wind Turbine (WTTC) 1000 V Ⴠ Test voltage 3000 V Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Minimum bending radius Permanently flexing 10x cable ø Ⴠ Insulation resistance Min. 20 MOhm x km Ⴠ Radiation resistance Up to 80x106 cJ/kg(up to 80 Mrad)  Ⴠ Bare copper conductor, extra-fine wire stranded, with AWG measures Ⴠ Special PVC core insulation with transparent nylon skin Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer (3 cores and more) Ⴠ Cores stranded in layers with optimal lay-lengths Ⴠ Separating foil Ⴠ Braided screening of tinned copper wires, coverage approx. 85%  Ⴠ Separator Ⴠ Special PVC outer sheath Ⴠ Sheath colour - black (RAL 9005) Ⴠ With length marking in feet Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Ⴠ UV-resistant Ⴠ Tests UL: TC-ER, PLTC-ER (AWG 18 - AWG 12), ITC-ER (AWG 18 - AWG 12), MTW, NFPA 79 2007. WTTC 1000 V, DP-1, OIL RES I&II, 90 °C dry / 75 °C wet, Class 1 Div. 2 per NEC Art 336, 392, 501, crush impact test in accordance with UL 1277 CSA: c(UL) CIC-TC FT4, CSA AWM I/II A/B FT4  Note Advantages Ⴠ Highly-flexible, simple installation Available on request Ⴠ with blue cores (DC) Ⴠ with red cores (AC) Ⴠ Grey or TPE outer sheath  Application HELUKABEL® MULTIFLEX 600-C is ahighly-flexible, screened, oil-resistant control cable. The special combination of TC-ER, PLTC-ER and ITC-ER allows this cable to be used as a connecting cable for industrial plant and machinery in accordance with NFPA 79 2007. Approvedfor open, unprotected installation in cable trays to the machine. Its outstanding oil resistance (OIL RES I &II) guarantees a long service life; for industrial applications in dry, damp and wet environments. Recommended applications: Production lines, bottling plants, machine construction, switch cabinets, conveyor systems, packaging machines, automotive industry. Please observe applicable installation regulations for use in energy supply chains. EMC = Electromagnetic compatibility. Tooptimise EMC characteristics, we recommend a large contact area for the copper braiding around the entire circumference on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 62556 62557 62558 62559 62560 62561 62562 62563 62564 62565 62566 62567 62568 62569 62570 62571 62572 62573 62574 62575 62576 62577 62578 62579  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 12G0,5 18G0,5 25G0,5 34G0,5 3G0,75 4G0,75 5G0,75 7G0,75 12G0,75 15G0,75 18G0,75 25G0,75 34G0,75 3G1,5 4G1,5 5G1,5 7G1,5 9G1,5 12G1,5 AWG-No. Outer Ø approx. mm 20 7,7 20 8,0 20 8,7 20 9,3 20 10,7 20 12,3 20 15,1 20 18,1 20 19,8 18 8,5 18 9,3 18 10,0 18 11,6 18 14,1 18 15,2 18 16,3 18 19,6 18 21,9 16 9,3 16 10,2 16 11,0 16 12,9 16 15,2 16 15,6 Cop. weight kg/km 30,0 37,0 46,0 54,0 70,0 112,0 153,0 225,0 267,0 55,0 69,0 82,0 119,0 178,0 175,0 252,0 362,0 473,0 75,0 93,0 113,0 162,0 193,0 249,0 Weight approx. kg/km 80,0 85,0 100,0 113,0 152,0 210,0 304,0 408,0 530,0 101,0 127,0 148,0 186,0 286,0 455,0 383,0 514,0 685,0 131,0 165,0 195,0 250,0 340,0 393,0  Dimensions and specifications may be changed without prior notice. (RN01) N 63  Part no. 62580 62581 62582 62583 62584 62585 62586 62587 62588 62589 62590 62591 62592 62593 62594 62595 62596 62597 62598 62599 62600 62602 62603 62605 No.cores x cross-sec. mm² 18G1,5 25G1,5 34G1,5 3G2,5 4G2,5 5G2,5 7G2,5 9G2,5 12G2,5 18G2,5 25G2,5 3G4 4G4 5G4 7G4 4G6 5G6 7G6 4G10 5G10 4G16 5G16 4G25 4G35 AWG-No. Outer Ø approx. mm 16 18,4 16 23,1 16 25,8 14 10,3 14 11,5 14 12,4 14 15,4 14 16,8 14 18,5 14 22,4 14 25,5 12 11,7 12 13,3 12 14,7 12 17,8 10 16,1 10 17,5 10 20,6 8 21,9 8 24,1 6 24,8 6 27,2 4 33,1 2 37,8 Cop. weight kg/km 376,0 510,0 674,0 141,0 149,0 195,0 243,0 312,0 368,0 639,0 796,0 180,0 221,0 330,0 363,0 314,0 441,0 505,0 526,0 610,0 730,0 1050,0 1450,0 37,0 Weight approx. kg/km 559,0 788,0 1203,0 218,0 222,0 350,0 373,0 479,0 730,0 1140,0 1530,0 296,0 305,0 450,0 536,0 469,0 772,0 1028,0 790,0 1096,0 1621,0 1759,0 2100,0 2550,0 N Command Cable UL (LiYY) Command Cable UL (LiYY-TP) Command Cable UL (LiYCY) Command Cable UL (LiYCY-TP) Photo: HELUKABEL® UL/CSA Data Cables N 64 Command Cable UL (LiYY) Style2464/300V,(80°C)   Technical data Cable structure Properties Ⴠ Special PVC command cable, approved to UL-Style2464, cores according AWG 26-20 to UL-Style1061/1729 AWG 18-16 to UL-Style1007/1569 Ⴠ Temperature range flexing -10 °C to +80 °C fixed installation -20 °C to +80 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage 1500 V Ⴠ Breakdown voltage min. 3000 V Ⴠ Minimum bending radius fixedapprox. 7,5x cable ø flexing approx. 15 cable ø Ⴠ Tinned copper, fine wire conductors AWG 26-20, gemäß ASTM-B174-95 classJ-M, AWG 18-16 gemäß ASTM-B286 Conductor make-up to: 0,14 mm² = 7x0,162 mm 0,23 mm² = 7x0,202 mm 0,34 mm² = 7x0,254 mm 0,56 mm² = 7x0,32 mm 0,82 mm² = 19x0,235 mm 1,30 mm² = 19x0,31 mm Ⴠ Special PVC core insulation class 43, semirigid to UL-Std. 1581 table 50.182 and 50.183 Ⴠ Colour coded to DIN 47100 or international colour code Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Special PVC outer jacket class43 to UL-Std.1581 table50.182 Ⴠ Outer jacket colour black (international colour code) grey (DIN 47100 / preferred type for stock) Ⴠ PVC flame retardant according to UL VW-1/CSA FT1 Ⴠ Conditionally resistant to Oil Solvents Acids Lyes Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers   Note Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ screened analogue type: Command Cable UL (LIYCY), see page N 69  Application Suitable for use as a command, measuring and control cable in tool making machinery conveyor system and production lines, in industrial plants and in air conditioning as well as in the steel producing industries. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. Jacket colour grey 83137 83138 83139 83140 83141 83142 83143 83144 83145 83146 83147 83153 83154 83155 83156 83157 83158 83159 83160 83161 83162 83163 83169 83170 83171 83172 83173 83174 83175 83176 83177 83178 83179 83185 83186 83187  Part no. Jacket colour black 83045 83046 83047 83048 83049 83050 83055 83056 83057 83058 83059 83130 83131 83132 83133 83134 83135 83136 83371 83372 83373 83374 83375 83376 83377 83378 83379 83380 83381 83382 83383 83384 83385 83386 83387 83388 No.cores x AWG-No. Outer Ø Cop. Weight cross-sec. approx. weight approx. mm² mm kg/km kg/km 2x0,14 3x0,14 4x0,14 6x0,14 10x0,14 12x0,14 16x0,14 18x0,14 24x0,14 27x0,14 30x0,14 2x0,23 3x0,23 4x0,23 6x0,23 10x0,23 12x0,23 16x0,23 18x0,23 24x0,23 27x0,23 30x0,23 2x0,34 3x0,34 4x0,34 6x0,34 10x0,34 12x0,34 16x0,34 18x0,34 24x0,34 27x0,34 30x0,34 2x0,56 3x0,56 4x0,56 26 26 26 26 26 26 26 26 26 26 26 24 24 24 24 24 24 24 24 24 24 24 22 22 22 22 22 22 22 22 22 22 22 20 20 20 3,6 3,8 4,0 4,6 5,6 5,8 6,3 6,6 7,5 7,6 8,0 3,8 4,0 4,3 4,9 6,0 6,2 6,8 7,1 8,1 8,4 8,9 4,1 4,3 4,6 5,4 6,6 6,8 7,5 8,1 9,4 9,7 10,2 4,6 4,8 5,2 3,6 4,0 5,4 8,1 13,4 16,2 21,5 34,4 32,4 36,3 40,4 4,6 7,1 9,4 14,2 23,8 28,5 38,1 43,1 59,7 64,7 71,9 6,5 9,8 13,0 19,6 32,5 39,1 52,0 59,0 79,0 88,0 97,8 9,8 14,6 19,4 13,0 15,0 18,0 25,0 38,0 46,0 56,0 62,0 82,0 97,0 110,0 16,0 19,0 23,0 32,0 55,0 60,0 75,0 82,0 116,0 140,0 150,0 25,0 30,0 45,0 60,0 80,0 105,0 130,0 140,0 190,0 207,0 225,0 30,0 33,0 41,0  Dimensions and specifications may be changed without prior notice. (RN02) N 65  Part no. Jacket colour grey 83188 83189 83190 83191 83192 83193 83194 83195 83201 83202 83203 83204 83205 83206 83207 83208 83209 83210 83211 83217 83218 83219 83220 83221 83222 83223 83224 83225 83226 83227 Part no. Jacket colour black 83389 83390 83391 83392 83393 83394 83395 83396 83397 83398 83399 83474 83475 83476 83477 83478 83479 83480 83481 83482 83483 83484 83491 83492 83493 83494 83495 83496 83497 83498 No.cores x AWG-No. Outer Ø Cop. Weight cross-sec. approx. weight approx. mm² mm kg/km kg/km 6x0,56 10x0,56 12x0,56 16x0,56 18x0,56 24x0,56 27x0,56 30x0,56 2x0,82 3x0,82 4x0,82 6x0,82 10x0,82 12x0,82 16x0,82 18x0,82 24x0,82 27x0,82 30x0,82 2x1,3 3x1,3 4x1,3 6x1,3 10x1,3 12x1,3 16x1,3 18x1,3 24x1,3 27x1,3 30x1,3 20 20 20 20 20 20 20 20 18 18 18 18 18 18 18 18 18 18 18 16 16 16 16 16 16 16 16 16 16 16 6,1 7,6 7,8 8,7 9,3 10,9 11,2 11,8 6,1 6,4 6,9 8,1 10,4 10,9 12,2 13,0 15,2 15,8 16,3 6,6 7,0 7,6 9,2 11,8 12,2 13,7 14,6 17,0 17,6 18,6 29,0 48,2 58,2 77,3 87,0 116,3 129,8 144,6 15,2 23,2 31,3 47,0 78,2 94,0 125,1 141,1 188,2 212,0 235,6 24,4 37,1 49,4 74,2 124,0 149,0 198,7 224,0 298,4 336,0 373,6 65,0 102,0 120,0 152,0 168,0 224,0 260,0 300,0 50,0 62,0 72,0 100,0 180,0 182,0 240,0 270,0 370,0 400,0 470,0 70,0 90,0 110,0 160,0 250,0 300,0 400,0 450,0 650,0 680,0 750,0 Command Cable UL (LiYY) 600V, Style2516/600V,(105°C)   Technical data Cable structure Properties Ⴠ Special PVC command cable, approved to UL-Style2516 Ⴠ Temperature range flexing -10 °C to +105 °C fixed installation -20 °C to +105 °C Ⴠ Nominal voltage 600 V Ⴠ Test voltage 2000 V Ⴠ Breakdown voltage min. 4000 V Ⴠ Minimum bending radius fixed approx. 7,5 cable ø flexing approx. 15 cable ø Ⴠ Tinned copper, fine wire conductors to ASTM-B174, classJ-K Conductor make-up to: 2,08 mm² = 41x0,254mm 3,20 mm² = 65x0,254mm Ⴠ Special PVC core insulation class43 to UL-Std.1581 table50.182 (105 °C) Ⴠ Colour coded to DIN47100 or international colour code Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Special PVC outer jacket class43 to UL-Std.1581 table50.182 (105 °C) Ⴠ Outer jacket colour black (international colour code) grey (DIN 47100 / preferred type from stock) Ⴠ PVC flame retardant according to UL VW-1/CSA FT1 Ⴠ Conditionally resistant to Oil Solvents Acids Lyes Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers    Application Note Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ screened analogue type: Command Cable UL (LIYCY), see page N 69 Suitable for use as a command, measuring and control cable in tool making machinery conveyor system and production lines, in industrial plants and in air conditioning as well as in the steel producing industries. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. Jacket colour grey 83233 83234 83235 83236 83237 83238 83239 83240 83241 83242 83243 83244  Part no. Jacket colour black 83624 83625 83626 83627 83628 83629 83630 83631 83632 83633 83634 83635 No.cores x AWG-No. Outer Ø Cop. Weight cross-sec. approx. weight approx. mm² mm kg/km kg/km 2x2,08 3x2,08 4x2,08 6x2,08 10x2,08 12x2,08 16x2,08 18x2,08 24x2,08 27x2,08 30x2,08 36x2,08 14 14 14 14 14 14 14 14 14 14 14 14 8,4 8,9 9,6 11,4 15,1 15,6 17,2 18,3 21,5 22,7 23,5 25,4 39,6 59,6 79,2 119,0 198,4 238,7 319,0 358,4 478,4 538,1 598,4 717,2 120,0 150,0 190,0 300,0 450,0 500,0 700,0 750,0 900,0 1100,0 1150,0 1800,0  Part no. Jacket colour grey 83245 83246 83247 83248 83249 83250 83251 83252 83253 Part no. Jacket colour black 83636 83637 83638 83639 83640 83641 83642 83643 83644 No.cores x AWG-No. Outer Ø Cop. Weight cross-sec. approx. weight approx. mm² mm kg/km kg/km 2x3,2 3x3,2 4x3,2 6x3,2 10x3,2 12x3,2 16x3,2 18x3,2 24x3,2 12 12 12 12 12 12 12 12 12 9,3 9,8 10,8 12,8 17,0 17,5 19,8 21,0 24,8 61,0 91,4 121,6 183,7 305,9 367,6 490,9 551,7 736,4 150,0 210,0 300,0 430,0 500,0 700,0 810,0 970,0 1200,0 N  Dimensions and specifications may be changed without prior notice. (RN02) N 66 Command Cable UL (LiYY-TP) Style2464/300V, 80°C   Technical data Cable structure Properties Ⴠ Special PVC command cable, approved to UL-Style2464,cores according, UL-Style1061/1729 Ⴠ Temperature range flexing -10 °C to +80 °C fixed installation -20 °C to +80 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage 1500 V Ⴠ Breakdown voltage min. 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius fixed approx. 7,5 cable ø flexing approx. 15 cable ø Ⴠ Tinned copper, fine wire conductors to ASTM-B174-95 classJ-M conductor make-up to 0,14 mm² = 7x0,162mm 0,23 mm² = 7x0,202mm 0,34 mm² = 7x0,254mm 0,56 mm² = 7x0,32mm Ⴠ Special PVC core insulation class43, semirigid to UL-Std.1581 table50.182 and50183 Ⴠ Colour coded to DIN47100 with colour repetition from pair no.23 and above or international colour code Ⴠ Cores stranded in pairs with optimal lay-length Ⴠ Pairs stranded in layers with optimal lay-length Ⴠ Seperator-foil Ⴠ Special PVC outer jacket class43 to UL-Std.1581 table50.182 Ⴠ Outer jacket colour black (international colour code) grey (DIN 47100 / preferred type) Ⴠ PVC flame retardant according to UL VW-1/CSA FT1 Ⴠ Conditionally resistant to Oil Solvents Acids Lyes Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers   Note Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ screened analogue type: Command Cable UL (LiYCY-TP), see page N 72  Application Twisted pair control cable for use in tool making machinery conveyor system and production lines, in industrial plants and in air conditioning as well as in the steel producing industries. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.pairs x Jacket cross-sec. colour mm² grey 83904 1 x 2 x 0,14 83905 2 x 2 x 0,14 83906 3 x 2 x 0,14 83907 4 x 2 x 0,14 83908 5 x 2 x 0,14 83909 6 x 2 x 0,14 83910 7 x 2 x 0,14 83911 8 x 2 x 0,14 83912 10 x 2 x 0,14 83913 12 x 2 x 0,14 83914 14 x 2 x 0,14 83915 15 x 2 x 0,14 83916 16 x 2 x 0,14 83917 18 x 2 x 0,14 83918 20 x 2 x 0,14 83919 22 x 2 x 0,14 83920 24 x 2 x 0,14 83921 25 x 2 x 0,14 83922 1 x 2 x 0,23 83923 2 x 2 x 0,23 83924 3 x 2 x 0,23 83925 4 x 2 x 0,23 83926 5 x 2 x 0,23 83927 6 x 2 x 0,23 83928 7 x 2 x 0,23 83929 8 x 2 x 0,23 83930 10 x 2 x 0,23 83931 12 x 2 x 0,23 83932 14 x 2 x 0,23  AWG-No. Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 24 24 24 24 24 24 24 24 24 24 24 3,6 5,1 5,3 5,8 6,2 6,8 6,8 7,3 7,4 9,1 9,8 10,6 10,6 11,1 11,9 12,4 13,1 13,4 3,8 5,4 5,7 6,2 6,6 7,2 7,2 7,8 9,2 9,7 10,2 2,7 5,4 8,1 10,8 13,6 16,2 19,0 21,7 26,7 32,6 37,4 40,7 43,4 48,5 54,2 59,3 64,7 67,2 4,8 9,7 14,7 19,6 24,6 29,3 34,1 39,1 48,9 59,4 68,7 20,0 24,0 30,0 38,0 44,0 51,0 57,0 64,0 76,0 93,0 103,0 109,0 112,0 119,0 130,0 150,0 169,0 178,0 32,0 36,0 48,0 56,0 71,0 80,0 89,0 98,0 111,0 135,0 160,0  Part no. No.pairs x Jacket cross-sec. colour mm² black 65214 1 x 2 x 0,14 65215 2 x 2 x 0,14 65216 3 x 2 x 0,14 65217 4 x 2 x 0,14 65218 5 x 2 x 0,14 65219 6 x 2 x 0,14 65220 7 x 2 x 0,14 65221 8 x 2 x 0,14 65222 10 x 2 x 0,14 65223 12 x 2 x 0,14 65224 14 x 2 x 0,14 65225 15 x 2 x 0,14 65226 16 x 2 x 0,14 65227 18 x 2 x 0,14 65228 20 x 2 x 0,14 65229 22 x 2 x 0,14 65230 24 x 2 x 0,14 65231 25 x 2 x 0,14 65232 1 x 2 x 0,22 65233 2 x 2 x 0,22 65234 3 x 2 x 0,22 65235 4 x 2 x 0,22 65236 5 x 2 x 0,22 65237 6 x 2 x 0,22 65238 7 x 2 x 0,22 65239 8 x 2 x 0,22 65240 10 x 2 x 0,22 65241 12 x 2 x 0,22 65242 14 x 2 x 0,22 AWG-No. Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 24 24 24 24 24 24 24 24 24 24 24 3,6 5,1 5,3 5,8 6,2 6,8 6,8 7,3 7,4 9,1 9,8 10,6 10,6 11,1 11,9 12,4 13,1 13,4 3,8 4,0 5,7 2,0 6,0 7,2 7,2 7,8 9,2 9,7 10,2 2,7 5,4 8,1 10,8 13,6 16,2 19,0 21,7 26,7 32,6 37,4 40,7 43,4 48,5 54,2 59,3 64,7 67,2 4,8 9,7 14,7 19,6 24,6 29,3 34,1 39,1 48,9 59,4 68,7 20,0 24,0 30,0 38,0 44,0 51,0 57,0 64,0 76,0 93,0 103,0 109,0 112,0 119,0 130,0 150,0 169,0 178,0 32,0 36,0 48,0 56,0 56,0 80,0 89,0 98,0 111,0 135,0 160,0  Continuation Ⴇ N 67 Command Cable UL (LiYY-TP) Style2464/300V, 80°C  Part no. No.pairs x Jacket cross-sec. colour mm² grey 83933 15 x 2 x 0,23 83934 16 x 2 x 0,23 83935 18 x 2 x 0,23 83936 20 x 2 x 0,23 83937 22 x 2 x 0,23 83938 24 x 2 x 0,23 83939 25 x 2 x 0,23 83940 1 x 2 x 0,34 83941 2 x 2 x 0,34 83942 3 x 2 x 0,34 83943 4 x 2 x 0,34 83944 5 x 2 x 0,34 83945 6 x 2 x 0,34 83946 7 x 2 x 0,34 83947 8 x 2 x 0,34 83948 10 x 2 x 0,34 83949 12 x 2 x 0,34 83950 14 x 2 x 0,34 83951 15 x 2 x 0,34 83952 16 x 2 x 0,34 83953 18 x 2 x 0,34 83954 20 x 2 x 0,34 83955 22 x 2 x 0,34 83956 24 x 2 x 0,34 83957 25 x 2 x 0,34 83958 1 x 2 x 0,56 83959 2 x 2 x 0,56 83960 3 x 2 x 0,56 83961 4 x 2 x 0,56 83962 5 x 2 x 0,56 83963 6 x 2 x 0,56 83964 7 x 2 x 0,56 83965 8 x 2 x 0,56 83966 10 x 2 x 0,56 83967 12 x 2 x 0,56 83968 14 x 2 x 0,56 83969 15 x 2 x 0,56 83970 16 x 2 x 0,56 83971 18 x 2 x 0,56 83972 20 x 2 x 0,56 83973 22 x 2 x 0,56 83974 24 x 2 x 0,56 83975 25 x 2 x 0,56  AWG-No. Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km 24 24 24 24 24 24 24 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10,9 10,9 11,5 12,2 13,0 13,7 14,2 4,2 5,9 6,3 7,0 7,6 8,2 8,2 9,0 10,7 11,3 12,1 12,7 12,7 13,6 14,4 15,1 16,2 16,7 4,6 6,5 7,1 7,8 8,6 9,6 9,6 12,2 12,5 13,1 13,8 14,7 14,7 15,7 16,7 17,2 18,6 19,2 73,7 79,1 88,9 98,4 108,6 117,9 123,5 6,5 13,0 19,5 26,1 32,6 39,2 45,7 52,3 65,3 78,4 91,5 97,8 104,6 117,8 130,7 143,6 156,8 163,3 10,8 21,5 32,3 43,1 53,8 64,6 75,3 86,1 107,7 129,1 150,6 161,3 172,1 193,6 215,1 236,6 258,0 268,9 171,0 185,0 209,0 230,0 248,0 279,0 292,0 38,0 44,0 60,0 79,0 92,0 119,0 128,0 139,0 171,0 194,0 222,0 231,0 240,0 264,0 291,0 300,0 359,0 381,0 60,0 80,0 94,0 104,0 130,0 151,0 174,0 262,0 298,0 302,0 327,0 370,0 402,0 480,0 551,0 621,0 703,0 721,0  Part no. No.pairs x Jacket cross-sec. colour mm² black 65243 15 x 2 x 0,22 65244 16 x 2 x 0,22 65245 18 x 2 x 0,22 65246 20 x 2 x 0,22 65247 22 x 2 x 0,22 65248 24 x 2 x 0,22 65249 25 x 2 x 0,22 65250 1 x 2 x 0,34 65251 2 x 2 x 0,34 65252 3 x 2 x 0,34 65253 4 x 2 x 0,34 65254 5 x 2 x 0,34 65255 6 x 2 x 0,34 65256 7 x 2 x 0,34 65257 8 x 2 x 0,34 65258 10 x 2 x 0,34 65259 12 x 2 x 0,34 65260 14 x 2 x 0,34 65261 15 x 2 x 0,34 65262 16 x 2 x 0,34 65263 18 x 2 x 0,34 65264 20 x 2 x 0,34 65265 22 x 2 x 0,34 65266 24 x 2 x 0,34 65267 25 x 2 x 0,34 65268 1 x 2 x 0,56 65269 2 x 2 x 0,56 65270 3 x 2 x 0,56 65271 4 x 2 x 0,56 65272 5 x 2 x 0,56 65273 6 x 2 x 0,56 65274 7 x 2 x 0,56 65275 8 x 2 x 0,56 65276 10 x 2 x 0,56 65277 12 x 2 x 0,56 65278 14 x 2 x 0,56 65279 15 x 2 x 0,56 65280 16 x 2 x 0,56 65281 18 x 2 x 0,56 65282 20 x 2 x 0,56 65283 22 x 2 x 0,56 65284 24 x 2 x 0,56 65285 25 x 2 x 0,56 AWG-No. Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km 24 24 24 24 24 24 24 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10,9 10,9 11,5 12,2 13,0 7,0 13,7 4,2 5,9 6,3 7,0 7,6 8,2 8,2 9,0 10,7 11,3 12,1 12,7 12,7 13,6 14,4 15,1 16,2 16,7 4,6 6,5 7,1 7,8 8,6 9,6 9,6 12,1 12,5 13,1 13,8 14,7 14,7 15,7 16,7 17,2 18,6 19,2 73,7 79,1 88,9 98,4 108,6 117,9 123,5 6,5 13,0 19,5 26,1 32,6 39,2 45,7 52,3 65,3 78,4 91,5 97,8 104,6 117,8 130,7 143,6 156,8 163,3 10,8 21,5 32,3 43,1 53,8 64,6 75,3 86,1 107,7 129,1 150,6 161,3 172,1 193,6 215,1 236,6 258,0 268,9 171,0 185,0 209,0 230,0 248,0 279,0 292,0 38,0 44,0 60,0 79,0 92,0 119,0 128,0 139,0 171,0 194,0 222,0 231,0 240,0 264,0 291,0 300,0 359,0 381,0 60,0 80,0 94,0 104,0 130,0 151,0 174,0 262,0 298,0 302,0 327,0 370,0 402,0 480,0 551,0 621,0 703,0 721,0  Dimensions and specifications may be changed without prior notice. (RN02) N N 68 Command Cable UL (LiYCY) Style 2464, 300V, 80°C, EMC-preferred type   Technical data Cable structure Properties Ⴠ Special PVC command cable, approved to UL-Style2464, cores according AWG 26-20 to UL-Style1061/1729 AWG 18-16 to UL-Style1007/1569 Ⴠ Temperature range flexing -10 °C to +80 °C fixed installation -20 °C to +80 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage 1500 V Ⴠ Breakdown voltage min. 3000 V Ⴠ Minimum bending radius fixed approx. 7,5 cable ø flexing approx. 15 cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Tinned copper, fine wire conductors AWG 26-20 gem. ASTM-B174-95 classJ-M, AWG 18-16 gem. ASTM-B286 conductor make-up to 0,14 mm² = 7x0,162 mm 0,23 mm² = 7x0,202 mm 0,34 mm² = 7x0,254 mm 0,56 mm² = 7x0,32 mm 0,82 mm² = 19x0,235 mm 1,30 mm² = 19x0,31 mm Ⴠ Special PVC core insulation class43, semirigid to UL-Std.1581 table50.182 and50.183 Ⴠ Colour coded to DIN47100 or international colour code Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Seperator-foil Ⴠ Drain wire Ⴠ Tinned copper wire braiding, approx. 85% coverage Ⴠ Special PVC outer jacket class43 to UL-Std.1581 table50.182 Ⴠ Outer jacket colour black (international colour code) grey (DIN 47100 / preferred type from stock) Ⴠ PVC flame retardant according to UL VW-1/CSA FT1 Ⴠ Conditionally resistant to Oil Solvents Acids Lyes Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ non-screened analogue types: Command Cable UL (LiYY), see page N 65  Application This cable type is suitable for use as a flexible connector cable in the fields of electronics, control and command technology as well as for measuring, signal and impulse transfer. Quick and cost favourable connections through cutting and clamping technics. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. Jacket colour grey 83254 83255 83256 83257 83258 83259 83260 83261 83262 83263 83264  Part no. Jacket colour black 83976 83977 83978 83979 83980 83981 83982 83983 83984 83985 83986 No.cores x AWG-No. Outer Ø Cop. Weight cross-sec. approx. weight approx. mm² mm kg/km kg/km 2x0,14 3x0,14 4x0,14 6x0,14 10x0,14 12x0,14 16x0,14 18x0,14 24x0,14 27x0,14 30x0,14 26 26 26 26 26 26 26 26 26 26 26 3,9 4,2 4,4 5,0 6,1 6,3 6,8 7,1 8,0 8,4 8,6 12,6 13,7 14,9 18,9 29,5 31,4 43,9 52,1 62,8 66,3 70,4 20,0 25,0 28,0 30,0 50,0 53,0 60,0 70,0 100,0 105,0 110,0  Part no. Jacket colour grey 83270 83271 83272 83273 83274 83275 83276 83277 83278 83279 83280 Part no. Jacket colour black 83987 83988 83989 83990 83991 83992 83993 83994 83995 83996 83997 No.cores x AWG-No. Outer Ø Cop. Weight cross-sec. approx. weight approx. mm² mm kg/km kg/km 2x0,23 3x0,23 4x0,23 6x0,23 10x0,23 12x0,23 16x0,23 18x0,23 24x0,23 27x0,23 30x0,23 24 24 24 24 24 24 24 24 24 24 24 4,3 4,5 4,8 5,4 6,5 6,7 7,4 7,7 8,8 9,0 9,3 16,1 18,9 23,0 32,8 50,9 59,1 68,4 79,5 97,3 122,0 132,0 20,0 25,0 30,0 40,0 60,0 70,0 90,0 123,0 131,0 160,0 170,0  Continuation Ⴇ N 69 Command Cable UL (LiYCY) Style 2464, 300V, 80°C, EMC-preferred type  Part no. Jacket colour grey 83286 83287 83288 83289 83290 83291 83292 83293 83294 83295 83296 83302 83303 83304 83305 83306 83307 83308 83309 83310 83311 83312  Part no. Jacket colour black 65044 65045 65046 65047 65048 65049 65050 65051 65052 65053 65054 65055 65056 65057 65058 65059 65060 65061 65062 65063 65064 65065 No.cores x AWG-No. Outer Ø Cop. Weight cross-sec. approx. weight approx. mm² mm kg/km kg/km 2x0,34 3x0,34 4x0,34 6x0,34 10x0,34 12x0,34 16x0,34 18x0,34 24x0,34 27x0,34 30x0,34 2x0,56 3x0,56 4x0,56 6x0,56 10x0,56 12x0,56 16x0,56 18x0,56 24x0,56 27x0,56 30x0,56 22 22 22 22 22 22 22 22 22 22 22 20 20 20 20 20 20 20 20 20 20 20 4,6 4,8 5,1 6,0 7,3 7,5 8,2 8,7 9,9 10,4 10,9 5,1 5,3 5,6 6,6 8,1 8,4 9,5 9,9 11,5 12,0 12,4 18,1 22,2 28,7 45,4 66,1 70,8 88,4 104,1 129,0 138,4 159,0 29,4 39,7 46,1 66,8 93,1 117,4 130,4 151,4 237,0 257,4 297,0 40,0 50,0 60,0 80,0 130,0 140,0 160,0 170,0 220,0 250,0 280,0 50,0 55,0 61,0 90,0 133,0 151,0 190,0 216,0 339,0 374,0 397,0  Part no. Jacket colour grey 83318 83319 83320 83321 83322 83323 83324 83325 83326 83327 83328 83334 83335 83336 83337 83338 83339 83340 83341 83342 83343 83344 Part no. Jacket colour black 65066 65067 65068 65069 65070 65071 65072 65073 65074 65075 65076 65077 65078 65079 65080 65081 65082 65083 65084 65085 65086 65087 No.cores x AWG-No. Outer Ø Cop. Weight cross-sec. approx. weight approx. mm² mm kg/km kg/km 2x0,82 3x0,82 4x0,82 6x0,82 10x0,82 12x0,82 16x0,82 18x0,82 24x0,82 27x0,82 30x0,82 2x1,3 3x1,3 4x1,3 6x1,3 10x1,3 12x1,3 16x1,3 18x1,3 24x1,3 27x1,3 30x1,3 18 18 18 18 18 18 18 18 18 18 18 16 16 16 16 16 16 16 16 16 16 16 6,5 6,8 7,4 8,8 10,9 11,2 12,9 13,5 15,6 15,9 16,6 6,9 7,3 7,9 9,6 12,4 12,8 12,8 15,5 18,1 18,7 19,5 39,1 50,0 59,1 89,1 141,4 152,8 184,1 207,2 272,6 289,1 317,4 59,1 74,1 96,4 137,4 191,7 251,7 276,1 364,1 442,4 494,7 521,4 60,0 75,0 90,0 125,0 180,0 220,0 290,0 300,0 450,0 470,0 490,0 90,0 160,0 200,0 290,0 450,0 600,0 650,0 680,0 900,0 990,0 1050,0  Dimensions and specifications may be changed without prior notice. (RN02) N N 70 Command Cable UL (LiYCY) Style2516/600V,105°C, EMC-preferred type   Technical data Cable structure Properties Ⴠ Special PVC command cable, approved to UL-Style2516 cores according UL-Style10012 Ⴠ Temperature range flexing -10 °C to +105 °C fixed installation -20 °C to +105 °C Ⴠ Nominal voltage 600 V Ⴠ Test voltage 2000 V Ⴠ Breakdown voltage min. 4000 V Ⴠ Minimum bending radius fixed approx. 7,5 cable ø flexing approx. 15 cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Tinned copper, fine wire conductors to ASTM-B174, classJ-K conductor make-up to 2,08 mm² = 41x0,254 mm 3,20 mm² = 65x0,254 mm Ⴠ Special PVC core insulation class43 to UL-Std.1581 table50.182 (105 °C) Ⴠ Colour coded to DIN47100 or international colour code Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Seperator-foil Ⴠ Drain wire Ⴠ Tinned copper wire braiding, approx. 85% coverage Ⴠ Special PVC outer jacket class43 to UL-Std.1581 table50.182 (105 °C) Ⴠ Outer jacket colour black (international colour code) grey (DIN 47100 / preferred type from stock) Ⴠ PVC flame retardant according to UL VW-1/CSA FT1 Ⴠ Conditionally resistant to Oil Solvents Acids Lyes Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ non-screened analogue types: Command Cable UL (LiYY), see page N 65  Application This cable type is suitable for use as a flexible connector cable in the fields of electronics, control and command technology as well as for measuring, signal and impulse transfer. Quick and cost favourable connections through cutting and clamping technics. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. Jacket colour grey 83350 83351 83352 83353 83354 83355 83356 83357 83358 83359 83360  Part no. Jacket colour black 65114 65115 65116 65117 65118 65119 65120 65121 65122 65123 65124 No.cores x AWG-No. Outer Ø Cop. Weight cross-sec. approx. weight approx. mm² mm kg/km kg/km 2x2,08 3x2,08 4x2,08 6x2,08 10x2,08 12x2,08 16x2,08 18x2,08 24x2,08 27x2,08 30x2,08 14 14 14 14 14 14 14 14 14 14 14 9,1 9,6 10,4 12,1 16,0 16,5 18,1 19,4 23,4 23,9 24,6 92,1 140,6 162,4 200,0 313,1 417,6 510,3 540,4 580,6 604,2 660,1 180,0 220,0 270,0 380,0 600,0 770,0 870,0 990,0 1300,0 1400,0 1610,0  Dimensions and specifications may be changed without prior notice. (RN02) N 71  Part no. Jacket colour grey 83362 83363 83364 83365 83366 83367 83368 83369 83370 Part no. Jacket colour black 65125 65126 65127 65128 65129 65130 65131 65132 65133 No.cores x AWG-No. Outer Ø Cop. Weight cross-sec. approx. weight approx. mm² mm kg/km kg/km 2x3,2 3x3,2 4x3,2 6x3,2 10x3,2 12x3,2 16x3,2 18x3,2 24x3,2 12 12 12 12 12 12 12 12 12 10,0 10,6 11,4 14,4 17,8 18,4 20,6 22,7 26,1 131,4 162,6 221,7 328,1 401,8 460,2 532,3 573,4 626,8 200,0 240,0 300,0 400,0 580,0 800,0 900,0 1000,0 1300,0 Command Cable UL (LiYCY-TP) Style 2464/300 V, 80°C, EMC-preferred type   Technical data Cable structure Properties Ⴠ Special PVC command cable, approved to UL-Style2464,cores according, UL-Style1061/1729 Ⴠ Temperature range flexing -10 °C to +80 °C fixed installation -20 °C to +80 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage 1500 V Ⴠ Breakdown voltage min. 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius fixed approx. 7,5 cable ø flexing approx. 15 cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Tinned copper, fine wire conductors to ASTM-B174-95 classJ-M Conductor make-up to 0,14 mm² = 7x0,162mm 0,23 mm² = 7x0,202mm 0,34 mm² = 7x0,254mm 0,56 mm² = 7x0,32mm Ⴠ Special PVC core insulation class43, semirigid to UL-Std.1581 table50.182 and50183 Ⴠ Colour coded to DIN47100 with colour repetition from pair no.22 and above or international colour code Ⴠ Cores stranded in pains with optimal lay-length Ⴠ Pains stranded in layers with optimal lay-length Ⴠ Seperator-foil Ⴠ Drain wire Ⴠ Tinned copper wire braiding, approx.85% coverage Ⴠ Special PVC outer jacket class43 to UL-Std.1581 table50.182 Ⴠ Outer jacket colour black (international colour code) grey (DIN 47100 / preferred type from stock) Ⴠ PVC flame retardant according to UL VW-1/CSA FT1 Ⴠ Conditionally resistant to Oil Solvents Acids Lyes Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ non-screened analogue type: Command Cable UL (LiYY-TP), see page N 67  Application Twisted pair control cable for use in tool making machinery conveyor system and production lines, in industrial plants and in air conditioning as well as in the steel producing industries. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. Jacket Jacket colour colour grey black 83774 65314 83775 65315 83776 65316 83777 65317 83778 65318 83779 65319 83780 65320 83781 65321 83782 65322 83783 65323 83784 65324 83785 65325 83786 65326 83787 65327 83788 65328 83789 65329 83790 65330 83791 65331  No.pairs x cross-sec. mm² 1 x 2 x 0,14 2 x 2 x 0,14 3 x 2 x 0,14 4 x 2 x 0,14 5 x 2 x 0,14 6 x 2 x 0,14 7 x 2 x 0,14 8 x 2 x 0,14 10 x 2 x 0,14 12 x 2 x 0,14 14 x 2 x 0,14 15 x 2 x 0,14 16 x 2 x 0,14 18 x 2 x 0,14 20 x 2 x 0,14 22 x 2 x 0,14 24 x 2 x 0,14 25 x 2 x 0,14 AWG-No. Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 26 4,0 5,6 5,8 6,3 6,7 7,3 7,3 7,8 9,1 9,8 10,5 11,1 11,1 11,8 12,4 13,1 13,6 15,1 15,7 19,5 23,7 26,9 31,2 49,7 52,0 53,9 59,6 67,1 75,2 77,3 80,4 84,2 98,2 104,1 112,0 114,4 32,0 39,0 47,0 55,0 68,0 86,0 92,0 97,0 111,0 141,0 150,0 154,0 155,0 170,0 183,0 207,0 228,0 239,0  Part no. Jacket Jacket colour colour grey black 83792 65332 83793 65333 83794 65334 83795 65335 83796 65336 83797 65337 83798 65338 83799 65339 83800 65340 83801 65341 83802 65342 83803 65343 83804 65344 83805 65345 83806 65346 83807 65347 83808 65348 83809 65349 No.pairs x cross-sec. mm² 1 x 2 x 0,23 2 x 2 x 0,23 3 x 2 x 0,23 4 x 2 x 0,23 5 x 2 x 0,23 6 x 2 x 0,23 7 x 2 x 0,23 8 x 2 x 0,23 10 x 2 x 0,23 12 x 2 x 0,23 14 x 2 x 0,23 15 x 2 x 0,23 16 x 2 x 0,23 18 x 2 x 0,23 20 x 2 x 0,23 22 x 2 x 0,23 24 x 2 x 0,23 25 x 2 x 0,23 AWG-No. Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 4,2 5,9 6,2 6,7 7,2 7,7 7,7 8,4 9,9 10,2 10,9 11,4 11,4 12,2 12,7 13,5 14,5 14,8 16,4 27,4 31,7 37,4 54,7 65,6 60,2 74,1 109,3 115,8 120,7 132,4 141,6 146,6 160,6 170,8 229,7 231,4 46,0 53,0 65,0 79,0 98,0 114,0 121,0 129,0 152,0 189,0 213,0 225,0 227,0 238,0 270,0 300,0 321,0 340,0  Continuation Ⴇ N 72 N Command Cable UL (LiYCY-TP) Style 2464/300 V, 80°C, EMC-preferred type   Part no. Jacket Jacket colour colour grey black 83810 65350 83811 65351 83812 65352 83813 65353 83814 65354 83815 65355 83816 65356 83817 65357 83818 65358 83819 65359 83820 65360 83821 65361 83822 65362 83823 65363 83824 65364 83825 65365 83826 65366 83827 65367 No.pairs x cross-sec. mm² 1 x 2 x 0,34 2 x 2 x 0,34 3 x 2 x 0,34 4 x 2 x 0,34 5 x 2 x 0,34 6 x 2 x 0,34 7 x 2 x 0,34 8 x 2 x 0,34 10 x 2 x 0,34 12 x 2 x 0,34 14 x 2 x 0,34 15 x 2 x 0,34 16 x 2 x 0,34 18 x 2 x 0,34 20 x 2 x 0,34 22 x 2 x 0,34 24 x 2 x 0,34 25 x 2 x 0,34 AWG-No. Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 22 4,6 6,4 6,9 7,5 8,1 8,8 8,8 9,7 11,5 12,0 12,6 13,4 13,4 14,4 15,0 15,9 17,0 17,3 17,0 36,7 44,6 54,1 63,4 73,4 79,4 88,4 107,0 122,4 138,2 154,3 161,4 197,9 211,4 217,6 230,4 138,5 58,0 65,0 78,0 88,0 110,0 126,0 140,0 148,0 184,0 210,0 241,0 245,0 251,0 275,0 300,0 320,0 371,0 402,0  Part no. Jacket Jacket colour colour grey black 83828 65368 83829 65369 83830 65370 83831 65371 83832 65372 83833 65373 83834 65374 83835 65375 83836 65376 83837 65377 83838 65378 83839 65379 83840 65380 83841 65381 83842 65382 83843 65383 83844 65384 83845 65385 No.pairs x cross-sec. mm² 1 x 2 x 0,56 2 x 2 x 0,56 3 x 2 x 0,56 4 x 2 x 0,56 5 x 2 x 0,56 6 x 2 x 0,56 7 x 2 x 0,56 8 x 2 x 0,56 10 x 2 x 0,56 12 x 2 x 0,56 14 x 2 x 0,56 15 x 2 x 0,56 16 x 2 x 0,56 18 x 2 x 0,56 20 x 2 x 0,56 22 x 2 x 0,56 24 x 2 x 0,56 25 x 2 x 0,56 AWG-No. Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 5,0 7,0 7,6 8,3 9,1 10,1 10,1 12,7 13,2 13,6 14,4 15,5 15,5 16,3 17,1 18,0 19,4 19,8  Dimensions and specifications may be changed without prior notice. (RN02) Insulating, shrinking, braided and temperature protection tubes Braided hoses High temperature protection Insulation tubes Heat-shrink tubes End caps You can find insulating, shrinking, braided and temperature protection tubes in our catalogue Cable Accessories. Request it now at www.helukabel.de N 73 26,0 56,1 71,7 92,4 107,4 122,4 131,7 144,3 179,6 201,7 221,4 231,6 257,1 282,4 306,7 321,8 342,4 361,2 70,0 89,0 102,0 119,0 140,0 162,0 198,0 272,0 307,0 318,0 342,0 381,0 417,0 494,0 570,0 643,0 724,0 740,0 N SiHF UL/CSA SiHF-C-Si UL/CSA Photo: HELUKABEL® UL/CSA Heat resistant Cables N 74 SiHF UL/CSA halogen-free, 150°C/ 600 V, two-approvals silicon multicore cable   Technical data Cable structure Ⴠ Special silicone multicore cable with higher heat-resistance range to ULStyle4476 and CSAAWMIIA/B Ⴠ Temperature range VDE -60 °C to +180 °C (up to +220 °C for short time) UL/CSA -50 °C to +150 °C Ⴠ Nominal voltage VDE U0/U 300/500 V UL/CSA U 600 V Ⴠ Test voltage 2000 V Ⴠ Breakdown voltage min. 5000 V Ⴠ Insulation resistance min. 200 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 20x106 cJ/kg (up to 20 Mrad) Ⴠ Tinned copper conductors to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Silicone core insulation Core identification to DINVDE0293-308 colour coded or black cores with continuous white numbers Ⴠ For 2-cores brown, blue Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Green-yellow earth-core (3 cores and above) Ⴠ Outer jacket of silicone Ⴠ Jacket colour preferably black Properties Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core. Ⴠ screened analogue type: SiHF-C-Si UL/CSA Ⴠ screened analogue type: SiHF-C-Si UL/CSA, see page N 77 Ⴠ Advantages Hardly changes of dielectric strength and the insulation resistance also at high temperatures, high ignition or flash point, in case of fire, forms an insulating layer of SiO2 Ⴠ Resistant to High molecular oils, fats from vegetables and animals, alcohols, plasticizers and clophenes, diluted acids, lyes and salt dissolution, oxidation substances, tropical influences and weather, lake water, oxygen and UV Ⴠ Halogen-free according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ Behaviour in fire no flame propagation test according to DINVDE0482 part265-2-1/ EN50265-2-1/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ For laying as a fixed installation only in open or ventilated pipe systems as well as in ducts. Otherwise the mechanical properties of the silicon are reduced by the enclosed air at temperatures exceeding 90 °C.  Application UL-CSA approved Silicone cables were evolved for use wherever insulation is subjected to extreme temperature changes. They are heat-resistant for permanent temperature up to +180 °C, for short time operation up to +220 °C. The good performance of the environmental resistant properties means that silicone cables can be used at temperatures down to -60 °C. Silicone cables are halogen-free cables and are especially suited for installation in power stations. They have also found their uses in the steel producing industries, aviation industry, ship building as well as in ceramic, glass and cement factories. Due to elastical characteristic of core insulations, these are used as flexible connection cable. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 23214 23215 23216 23217 23218 23219 23220 23221 23222 23223 23224 23225  N 75  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 6G0,5 7G0,5 8G0,5 10G0,5 12G0,5 16G0,5 18G0,5 25G0,5 AWG-No. Outer Ø approx. mm 20 7,7 20 8,1 20 8,8 20 9,4 20 10,4 20 10,4 20 10,8 20 12,8 20 13,4 20 13,9 20 14,4 20 16,8 Cop. weight kg/km 9,6 14,4 19,2 24,0 28,8 33,6 38,4 48,0 57,6 76,8 86,4 120,0 Weight approx. kg/km 73,0 82,0 98,0 120,0 131,0 140,0 183,0 201,0 241,0 269,0 311,0 401,0  Part no. 23226 23227 23228 23229 23230 23231 23232 23233 23234 23235 23236 23237 No.cores x cross-sec. mm² 2x1 3G1 4G1 5G1 6G1 7G1 8G1 10G1 12G1 16G1 18G1 25G1 AWG-No. Outer Ø approx. mm 17 8,2 17 9,0 17 10,0 17 10,6 17 11,4 17 11,4 17 12,4 17 13,2 17 14,4 17 15,7 17 16,6 17 19,1  Cop. weight kg/km 19,2 28,2 38,4 48,0 57,6 67,2 76,8 96,0 115,2 153,6 172,8 240,0 Weight approx. kg/km 88,0 111,0 130,0 161,0 182,0 198,0 251,0 304,0 343,0 441,0 492,0 617,0 Continuation Ⴇ SiHF UL/CSA halogen-free, 150°C/ 600 V, two-approvals silicon multicore cable  Part no. 23238 23239 23240 23241 23242 23243 23244 23245 23246 23247 23248 23249 23250 23251 23252 23253 23254 23255 23256 23257 23258 23259 23260 23261 23262 23263 23264 23265 23266 23267 23268 23269  No.cores x cross-sec. mm² 2x1,5 3G1,5 4G1,5 5G1,5 6G1,5 7G1,5 8G1,5 10G1,5 12G1,5 14G1,5 16G1,5 18G1,5 20G1,5 25G1,5 41G1,5 2x2,5 3G2,5 4G2,5 5G2,5 6G2,5 7G2,5 8G2,5 10G2,5 12G2,5 16G2,5 18G2,5 25G2,5 2x4 3G4 4G4 5G4 7G4 AWG-No. Outer Ø approx. mm 16 9,1 16 9,6 16 10,6 16 11,4 16 12,4 16 12,4 16 13,9 16 16,1 16 16,6 16 18,0 16 20,0 16 20,9 16 21,8 16 24,0 16 29,2 14 9,8 14 10,4 14 11,6 14 12,4 14 13,6 14 13,6 14 14,9 14 17,2 14 21,0 14 22,6 14 24,0 14 28,8 12 10,9 12 11,8 12 12,9 12 14,5 12 17,8 Cop. weight kg/km 28,8 43,2 57,6 72,0 86,4 100,8 115,2 144,0 172,6 201,6 230,4 259,2 288,0 345,6 590,4 48,0 72,0 96,0 120,0 144,0 168,0 192,0 240,0 288,0 384,0 432,0 600,0 76,8 115,2 153,6 192,0 268,8 Weight approx. kg/km 117,0 131,0 166,0 198,0 240,0 261,0 298,0 359,0 431,0 520,0 569,0 652,0 724,0 925,0 1440,0 141,0 174,0 217,0 271,0 314,0 331,0 404,0 495,0 554,0 725,0 838,0 1108,0 190,0 241,0 304,0 384,0 527,0  Part no. 23270 23271 23272 23273 23274 23275 23276 23277 23278 23279 23280 23281 23282 23283 23284 23285 23286 23287 23288 23289 23290 No.cores x cross-sec. mm² 2x6 3G6 4G6 5G6 7G6 2x10 3G10 4G10 5G10 7G10 2x16 3G16 4G16 5G16 7G16 2x25 3G25 4G25 2x35 3G35 4G35 AWG-No. Outer Ø approx. mm 10 14,4 10 15,1 10 16,4 10 18,2 10 21,1 8 18,0 8 18,9 8 20,0 8 22,1 8 24,9 6 20,9 6 22,8 6 24,9 6 26,9 6 28,1 4 25,1 4 27,0 4 32,1 2 28,7 2 30,6 2 32,9 Cop. weight kg/km 115,2 172,8 230,4 288,0 403,2 192,0 288,0 384,0 480,0 672,0 307,2 460,8 614,4 768,0 1075,3 480,0 720,0 960,0 672,0 1008,0 1344,0 Weight approx. kg/km 284,0 392,0 492,0 610,0 681,0 405,0 620,0 741,0 914,0 1164,0 441,0 501,0 623,0 971,0 1690,0 711,0 1210,0 1524,0 1140,0 1523,0 2217,0  Dimensions and specifications may be changed without prior notice. (RN03) N N 76 SiHF-C-Si UL/CSA halogen-free, 150°C/ 600 V, two-approvals silicon multicore cable, Cu-screened, EMC-preferred type   Technical data Cable structure Properties Ⴠ Special silicone multicore cable with higher heat-resistance range to ULStyle4476 and CSAAWMIIA/B Ⴠ Temperature range VDE -60 °C to +180 °C (up to +220 °C for short time) UL/CSA -50 °C to +150 °C Ⴠ Nominal voltage VDE: U0/U 300/500 V UL/CSA: U 600 V Ⴠ Test voltage 2000 V Ⴠ Breakdown voltage min. 5000 V Ⴠ Insulation resistance min. 200 MOhm x km Ⴠ Minimum bending radius flexing 10x cable ø fixed installation 5x cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Radiation resistance up to 20x106 cJ/kg (up to 20 Mrad) Ⴠ Tinned copper conductors to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Silicone core insulation Ⴠ Core identification to DINVDE0293-308 colour coded or black cores with continuous white numbers Ⴠ For 2-cores brown, blue Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Green-yellow earth-core (3 cores and above) Ⴠ Foil separator Ⴠ Tinned copper braided screening, approx. 85% coverage Ⴠ Outer jacket of silicone Ⴠ Jacket colour preferably black  Ⴠ Halogen-free according to VDE0482 part267/ DINEN50267-2-1/ IEC60754-1 (equivalent DINVDE0472 part815) Ⴠ Behaviour in fire no flame propagation test according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ Advantages Hardly changes of dielectric strength and the insulation resistance also at high temperatures High ignition or flash point In case of fire, forms an insulating layer of SiO2 Ⴠ Resistant to High molecular oils, fats from vegetables and animals, alcohols, plasticizers and clophenes, diluted acids, lyes and salt dissolution, oxidation substances, tropical influences and weather, lake water, oxygen and UV Ⴠ For laying as a fixed installation only in open or ventilated pipe systems as well as in ducts. Otherwise the mechanical properties of the silicon are reduced by the enclosed air at temperatures exceeding 90 °C.  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core. Ⴠ non-screened analogue type: SiHF UL/CSA, see page N 75 Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm².  Application UL-CSA approved Silicone cables were evolved for use wherever insulation is subjected to extreme temperature changes. The good performance of the environmental resistant properties means that silicone cables can be used at temperatures down to -60 °C. Silicone cables are halogen-free cables and are especially suited for installation in power stations. They have also found their uses in the steel producing industries, aviation industry, ship building as well as in ceramic, glass and cement factories. Due to elastical characteristic of core insulations, these are used as flexible connection cable. An interference-free transmission of signals and pulse is assured by the high screening density. The ideal interference-protected silicone multicore flexible cable for such applications as given above. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 22637 22638 22639 22640 22641 22642 22643 22644 22645 22646 22647 22648 22649 22650 22651 22652 22653 22654 22655  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 10G0,5 12G0,5 2x1 3G1 4G1 5G1 7G1 10G1 12G1 2x1,5 3G1,5 4G1,5 5G1,5 7G1,5 AWG-No. Outer Ø approx. mm 20 9,0 20 9,3 20 9,7 20 10,1 20 10,5 20 13,2 20 13,4 17 9,5 17 9,6 17 10,6 17 11,6 17 12,1 17 14,7 17 15,1 16 10,6 16 11,0 16 11,6 16 13,1 16 14,1 Cop. weight kg/km 55,5 60,8 66,5 81,6 92,2 124,0 134,4 66,7 86,2 96,8 108,3 141,2 190,0 209,8 87,7 103,5 131,7 148,5 193,4 Weight approx. kg/km 94,0 104,0 125,0 149,0 168,0 237,0 260,0 130,0 151,0 169,0 198,0 236,0 248,0 364,0 169,0 191,0 230,0 272,0 341,0  Dimensions and specifications may be changed without prior notice. (RN03) N 77  Part no. 22656 22657 22658 22659 22660 22661 22662 22663 22664 22665 22666 22667 No.cores x cross-sec. mm² 10G1,5 12G1,5 2x2,5 3G2,5 4G2,5 5G2,5 7G2,5 4G4 5G4 4G6 5G6 4G10 AWG-No. Outer Ø approx. mm 16 17,3 16 17,9 14 12,0 14 12,7 14 14,0 14 15,1 14 16,9 12 17,0 12 19,1 10 18,6 10 21,3 8 25,5 Cop. weight kg/km 268,5 298,4 122,3 147,7 188,6 214,9 265,7 294,0 374,0 449,0 563,0 759,0 Weight approx. kg/km 478,0 521,0 226,0 271,0 332,0 384,0 478,0 516,0 641,0 773,0 980,0 1284,0 N Rubber-/Neoprene Control Cable N07RN-F/SOOW Photo: HELUKABEL® UL/CSA Rubber Cables N 78 Rubber / Neoprene Control Cable TypenSJOundSO   Technical data Cable structure Ⴠ UL+CSA approved rubber/neoprene flexible cables Ⴠ Temperature range SJO and SO -40 °C to +90 °C Ⴠ Nominal voltage 300 V for SJO 600 V for SO Ⴠ Approvals UL Subject 62 CSA-C22.2-49 Plain copper conductors to ASTMB-174 Core insulation of synthetic rubber, EPDM Cores colour coded Cores stranded in layers with optimal lay-length Ⴠ Hemp or cotton tape Ⴠ Outer jacket neoprene (oil resistant) Ⴠ Jacket colour black Properties Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Resistant Oil Wetness UV-radiation Ⴠ Colour code 2 cores black, white 3 cores black, white, green 4 cores black, white, green, red  Note Ⴠ Note: SJO-18/2 18 = AWG 18 2 = No. of cores Ⴠ Supply lengths are on original reels of 76 m or 152 m or on drums of 305 m lengths. Ⴠ Further Types also available: PVC control cables SJT, SJTO, ST, STO. Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm².  Application For use as a feeder cable under rough conditions in motors and machine construction, at shipyards, in steel production and in farming. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.  Nominal voltage 300 Volt, type SJO (90°C) Part no. No.cores x AWG-no. 63010 63011 63012 63013 63014 63015 63016 63017 63018 2 x 18 3 x 18 4 x 18 2 x 16 3 x 16 4 x 16 2 x 14 3 x 14 4 x 14 Current carrying capacity inAmp. 7 7 7 10 10 10 15 15 15 Cond. make-up n x wire Ø 16 x 0,3 16 x 0,3 16 x 0,3 26 x 0,3 26 x 0,3 26 x 0,3 41 x 0,3 41 x 0,3 41 x 0,3 Outer Ø approx. mm 7,8 8,4 9,2 8,3 9,0 10,0 9,4 10,0 10,7 Weight approx. kg/km 65,0 80,0 95,0 130,0 148,0 180,0 195,0 225,0 288,0  Nominal voltage 600 Volt, type SO (90°C) Part no. No.cores x AWG-no. 63034 63035 63036 63037 63038 63039 63040 63041 63042 63043 63044 63045 63046 63047 63048 2 x 18 3 x 18 4 x 18 2 x 16 3 x 16 4 x 16 2 x 14 3 x 14 4 x 14 2 x 12 3 x 12 4 x 12 2 x 10 3 x 10 4 x 10 Current carrying capacity inAmp. 7 7 7 10 10 10 15 15 15 20 20 20 25 25 25 Cond. make-up n x wire Ø 16 x 0,3 16 x 0,3 16 x 0,3 26 x 0,3 26 x 0,3 26 x 0,3 41 x 0,3 41 x 0,3 41 x 0,3 65 x 0,3 65 x 0,3 65 x 0,3 105 x 0,3 105 x 0,3 105 x 0,3  Dimensions and specifications may be changed without prior notice. (RN04) N 79 Outer Ø approx. mm 10,0 10,4 11,0 10,4 11,0 12,3 13,5 14,3 15,3 15,3 16,2 18,9 16,4 17,5 19,0 Weight approx. kg/km 70,0 86,0 110,0 140,0 155,0 200,0 200,0 235,0 300,0 280,0 310,0 330,0 305,0 325,0 365,0 H07RN-F/SOOW rubber-sheathed cable, harmonizised type   Technical data Cable structure Properties Ⴠ Rubber-sheated cable H07RN-F according to VDE 0282 Part 4, HD 22.4 S4 Ⴠ UL - SOOW CSA - SOOW Ⴠ Temperature range Ⴠ HAR -25 °C to +60 °C Ⴠ UL/CSA -40 °Cto +90 °C Ⴠ Permissible operating temperature at the conductor +60 °C Ⴠ Nominal voltage HAR 450/750 V UL/CSA 600 V Ⴠ Test voltage 2500 V Ⴠ Minimum bending radius Flexing 10x cable ø Fixed installation 7,5 cable ø  Ⴠ Bare copper conductor, fine wire stranded according to DIN VDE 0295 cl. 5, BS 6360 cl. 5, IEC 60228 or HD 383 Ⴠ Rubber core insulation (EPR) Ⴠ Core identification 3 cores: blue, brown, green-yellow 4 cores: brown, black, grey, green-yellow 5 cores: blue, brown, black, grey, green-yellow Ⴠ Cores stranded in layers with optimal lay-lengths Ⴠ Rubber outer sheath (CPE) Ⴠ Sheath colour - black Ⴠ Ozone-resistant Ⴠ Weather and UV-resistant Ⴠ Resistant to oils and greases  Note Ⴠ G - with green-yellow earth core  Application Highly-standardised, heavy-duty rubber-sheated cable for use in practically all machines destined for export markets, in dry, damp, wet environments and outdoors. As a feeder to transportable motors or machines, cranes, hoists, hand lamps and drilling machines. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.    Part no. 39025 39026 39027 39028 39029 39030 39031 39032  No.cores x cross-sec. mm² 3G1 3G1,5 4G1,5 5G1,5 3G2,5 4G2,5 5G2,5 3G4 Outer Ø Cop. approx. mm weight kg/km 9,6 29,0 10,2 43,0 11,4 58,0 13,1 72,0 14,0 72,0 15,1 96,0 16,9 120,0 16,0 115,0 Weight approx. kg/km 130,0 165,0 200,0 240,0 235,0 290,0 345,0 320,0 AWG-No. 18 16 16 16 14 14 14 12  Part no. 39033 39034 39035 39036 39037 39038 39039 No.cores x cross-sec. mm² 4G4 5G4 3G6 4G6 5G6 3G10 4G10 Outer Ø Cop. approx. mm weight kg/km 17,3 154,0 18,7 192,0 17,1 173,0 18,4 230,0 20,1 288,0 22,9 288,0 25,0 384,0 Weight approx. kg/km 395,0 485,0 420,0 540,0 650,0 810,0 950,0 AWG-No. 12 12 10 10 10 8 8  Dimensions and specifications may be changed without prior notice. (RF01) N 80 N MULTISPEED® 500-PVC UL/CSA JZ-602 RC* MULTISPEED® 500-C-PVC UL/CSA JZ-602 RC*-CY JZ-602 RC*-PUR MULTIFLEX 512® PUR UL/CSA MULTISPEED® 500-PUR UL/CSA JZ-602 RC*-C-PUR MULTIFLEX 512® C-PUR UL/CSA MULTISPEED® 500-C-PUR UL/CSA MULTISPEED® 500-TPE UL/CSA MULTISPEED® 500-C-TPE UL/CSA SUPERTRONIC-310-PVC SUPERTRONIC-310-C-PVC SUPERTRONIC-330 PURö SUPERTRONIC 330 C-PURö SUPER-PAAR-TRONIC 340-C-PUR MULTISPEED® TRONIC-PUR MULTISPEED® TRONIC-C-PUR Photo: HELUKABEL® UL/CSA Cables for Drag Chains N 81 MULTISPEED® 500-PVC UL/CSA high flexible, safety against high bending in drag chain systems, oil-resistant, low torsion, meter marking   Technical data Cable structure Properties Ⴠ Special drag chain cables for high mechanical stress in adapted to DINVDE0281 part13 and EDINVDE0245 and UL-Std.758 AWM Style21179 Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -30 °C to +80 °C Ⴠ Nominal voltage VDE U0/U 300/500 V UL 600 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductors, Unilay with short pitch length Ⴠ Special TPE core insulation Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core (3 cores and above) Ⴠ Stranding: <7 cores: cores stranded in a layer with optimal lay-length around a filler as per construction ุ7 cores: cores stranded with optimal lay-length to bunch-construction with low torsion strength, optimal selected short lay-length around a filler Ⴠ Special-PVC outer sheath, especially resistant against fatigue strength, extruded as filler with pressure Ⴠ Sheath colour black (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) VW-1, FT1 Ⴠ Low-adhesion Ⴠ Ozon and UV resistant  Ⴠ High property of alternating bending strength Ⴠ Long life durabilities due to low friction-resistance Ⴠ Better chemical resistance Ⴠ Oil resistance to DIN EN 60811-2-1 Ⴠ High stability Ⴠ Higher economical solution Ⴠ Reduced ø, results low weight of moving materials Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ screened analogue type: MULTISPEED® 500-C-PVC UL/CSA, see page N 84  Application UL/CSA approved HELUKABEL® MULTISPEED 500-PVC are installed there, where the extreme requirements for the cables are necessary. Designed for the export-orientated machinery manufacturer, specifically for USA and Canada. The selected materials and lay-up technique permit these high flexible cables for permanent application in drag chains for long distances, high and slow speed of movements. These high flexible PVC control cables are suitable for shift- and bending stresses in machines and machine tool constructions. These are installed in dry, open airand moist rooms with free movement without tensile stress or forced movements. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 24295 24296 24297 24298 24299 24300 24301 24302 24303 24304 24305 24306 24307 24308 24309 24310 24311 24312 24313 24314  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 12G0,5 18G0,5 25G0,5 4G0,75 5G0,75 7G0,75 12G0,75 18G0,75 25G0,75 36G0,75 42G0,75 3G1 4G1 5G1 7G1 AWG-No. Outer Ø approx. mm 20 4,8 20 5,1 20 5,5 20 6,0 20 9,1 20 10,0 20 12,2 20 14,3 19 6,1 19 6,6 19 10,5 19 11,4 19 14,2 19 16,3 19 20,1 19 22,2 18 5,9 18 6,4 18 7,0 18 11,2 Cop. weight kg/km 9,6 14,4 19,0 24,0 33,6 58,0 86,0 120,0 29,0 36,0 50,0 86,0 130,0 180,0 259,0 302,0 29,0 38,4 48,0 67,0 Weight approx. kg/km 40,0 45,0 57,0 66,0 81,0 133,0 194,0 274,0 63,0 79,0 107,0 169,0 247,0 366,0 540,0 630,0 69,0 86,0 101,0 140,0  Part no. 24315 24316 24317 24318 24319 24320 24321 24322 24323 24324 24325 24326 24327 24328 24329 24330 No.cores x cross-sec. mm² 12G1 18G1 25G1 3G1,5 4G1,5 5G1,5 7G1,5 12G1,5 18G1,5 25G1,5 4G2,5 5G2,5 7G2,5 12G2,5 18G2,5 25G2,5 AWG-No. Outer Ø approx. mm 18 12,3 18 15,1 18 17,6 16 6,7 16 7,3 16 8,0 16 13,2 16 14,4 16 17,7 16 20,5 14 8,9 14 9,9 14 16,1 14 17,8 14 21,8 14 24,4 Cop. weight kg/km 115,0 173,0 240,0 43,0 58,0 72,0 101,0 173,0 259,0 360,0 96,0 120,0 168,0 288,0 432,0 600,0 Weight approx. kg/km 227,0 351,0 489,0 88,0 110,0 130,0 182,0 319,0 420,0 604,0 172,0 219,0 303,0 504,0 754,0 940,0  Dimensions and specifications may be changed without prior notice. (RN05) N 82 N JZ-602 RC* cable for drag chains, 90°C, 600V, two approvals control cable, meter marking   Technical data Cable structure Properties Ⴠ Control cable of special-PVC to UL AWM Style10012 (core insulation) Style2587 (jacket insulation) and CSA Ⴠ Temperature range flexing -5 °C to +90 °C fixed installation -40 °C to +90 °C Ⴠ Nominal voltage according to UL + CSA 600 V Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min 20 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, extra fine wire conductors, to DINVDE0295 cl.6 col.4, BS6360 cl.6 and IEC60228 cl.6 Ⴠ Special PVC core insulation, YI8 to DINVDE0207 part4 and class43 to UL-Std.1581 Ⴠ Red cores with continuous white figure imprint to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal selected lay-lenght Ⴠ Core wrapping with fleece over each layer Ⴠ Special PVC outer jacket YM5 to DINVDE0207 part5, UL-Style2587 and CSAC22.2 No210 Ⴠ Outer jacket black (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ UV-resistant Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core. Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ screened analogue type: JZ-602 RC* -CY, see page N 85  Application These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms. These special cables for drag chains are used for permanent flexible applications in machineries, machine tools, robot technics, for movable automated machinery parts. These cables have shown excellent performance in combination with standard cable trays. Interesting for the export-oriented machines and machinery plants. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. RC = Robotics Cable = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 89900 89901 89902 89903 89904 89905 89906 89907 89908 89909 89910 89911 89912 89913 89914 89915 89916 89917 89918 89919 89920 89921 89922 89923 89924 89925  No.cores x cross-sec. mm² 3G0,5 4G0,5 5G0,5 7G0,5 9G0,5 12G0,5 18G0,5 25G0,5 34G0,5 3G0,75 4G0,75 5G0,75 7G0,75 9G0,75 12G0,75 15G0,75 18G0,75 25G0,75 34G0,75 3G1,5 4G1,5 5G2,5 7G1,5 9G1,5 12G1,5 18G1,5 AWG-No. Outer Ø approx. mm 20 6,0 20 6,5 20 7,1 20 8,2 20 10,0 20 10,5 20 12,5 20 15,2 20 17,1 18 6,6 18 7,1 18 7,8 18 9,2 18 11,0 18 11,5 18 13,2 18 14,0 18 17,2 18 19,1 16 7,4 16 8,0 16 8,8 16 10,8 16 12,8 16 13,5 16 16,0 Cop. weight kg/km 14,0 19,0 24,0 34,0 43,2 58,2 86,0 120,0 163,0 23,8 31,7 39,6 55,4 71,2 95,0 119,0 142,4 197,8 269,0 44,0 58,0 72,0 101,0 129,7 173,0 260,0 Weight approx. kg/km 58,0 69,0 84,0 123,0 177,0 192,0 256,0 358,0 487,0 88,0 101,0 126,0 145,0 168,0 260,0 300,0 360,0 640,0 730,0 94,0 117,0 140,0 186,0 244,0 319,0 451,0  Dimensions and specifications may be changed without prior notice. (RN05) N 83  Part no. 89926 89927 89932 89928 89933 89929 89934 89935 89930 89936 89931 89937 89938 89939 89940 89941 No.cores x cross-sec. mm² 25G1,5 34G1,5 3G2,5 4G2,5 5G2,5 7G2,5 12G2,5 3G4 4G4 5G4 7G4 4G6 4G10 4G16 4G25 4G35 AWG-No. Outer Ø approx. mm 16 19,8 16 22,4 14 8,9 14 10,1 14 11,3 14 13,6 14 16,8 12 10,9 12 12,4 12 13,8 12 16,6 10 14,6 8 18,2 6 22,6 4 26,5 2 30,8 Cop. weight kg/km 360,0 490,0 72,0 96,0 120,0 168,0 288,0 115,0 154,0 192,0 269,0 231,0 384,0 615,0 960,0 1344,0 Weight approx. kg/km 625,0 840,0 150,0 185,0 242,0 293,0 498,0 231,0 298,0 370,0 460,0 430,0 720,0 1060,0 1590,0 2105,0 MULTISPEED® 500-C-PVC UL/CSA oil resistant, high flexible, safety against high bending in drag chain systems, low torsion, screened, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special drag chain cables for high mechanical stress in adapted to DINVDE0281 part13 and EDINVDE0245 and UL-Std.758 AWM Style21179 Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -30 °C to +80 °C Ⴠ Nominal voltage VDE U0/U 300/500 V UL 600 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Coupling resistance max. 250 Ohm x km Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductors, Unilay with short pitch length Ⴠ Special TPE core insulation Black cores with continuous white numbering Ⴠ Green-yellow earth core (3 cores and above) Ⴠ Stranding: <7 cores: cores stranded in a layer with optimal lay-length around a filler as per construction ุ7 cores: cores stranded with optimal lay-length to bunch-construction with low torsion strength, optimal selected short lay-length around a filler Ⴠ Special-PVC inner sheath YM2 extruded as filler with pressure grey (RAL 7001) Ⴠ Tinned copper braided screen, coverage 85% max., with optimal bunch Ⴠ Special-PVC outer sheath, especially resistant against fatigue strength Ⴠ sheath colourblack (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) VW-1, FT1 Ⴠ Low adhesion Ⴠ Ozon and UV resistant Ⴠ High property of alternating bending strength Ⴠ Long life durability due to low friction-resistance Ⴠ Better chemical resistance Ⴠ Oil resistance to DIN EN 6081-2-1 Ⴠ High stability Ⴠ Higher economical solution Ⴠ Reduced ø, results low weight of moving materials Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ unscreened analogue type: MULTISPEED® 500-PVC UL/CSA, see page N 82  Application For permanent application in drag chains for long distances, high and slow speed of movements. These high flexible PVC control cables are suitable for shift- and bending stresses in machines and machine tool constructions. These are installed in dry, moist rooms and in open airwith free movement without tensile stress or forced movements. These screened cables are particularly suitable for the interference-free transmission in instrumentation and control engineering applications. For applications which go beyond standard solutions we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 24335 24336 24337 24338 24339 24340 24341 24342 24343 24344 24345 24346 24347 24348 24349 24350 24351  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 9G0,5 12G0,5 18G0,5 25G0,5 2x0,75 3G0,75 4G0,75 5G0,75 7G0,75 12G0,75 18G0,75 25G0,75 AWG-No. Outer Ø approx. mm 20 6,6 20 6,9 20 7,3 20 7,8 20 11,3 20 11,4 20 12,6 20 15,0 20 17,1 19 6,8 19 7,4 19 8,0 19 8,5 19 12,9 19 14,4 19 17,5 19 19,9 Cop. weight kg/km 30,0 36,0 42,0 48,0 64,0 80,0 105,0 137,0 210,0 40,0 48,0 55,0 66,0 85,0 135,0 190,0 275,0 Weight approx. kg/km 88,0 101,0 116,0 146,0 181,0 219,0 271,0 374,0 542,0 96,0 111,0 140,0 161,0 227,0 317,0 486,0 651,0  Part no. 24352 24353 24354 24355 24356 24357 24358 24359 24360 24361 24362 24363 24364 24365 24366 24367 No.cores x cross-sec. mm² 3G1 4G1 5G1 7G1 12G1 18G1 25G1 3G1,5 4G1,5 5G1,5 7G1,5 12G1,5 18G1,5 25G1,5 4G2,5 5G2,5 AWG-No. Outer Ø approx. mm 18 7,7 18 8,3 18 9,1 18 14,0 18 15,0 18 18,7 18 21,2 16 8,6 16 9,4 16 10,4 16 16,0 16 17,6 16 21,3 16 24,8 14 11,3 14 12,3 Cop. weight kg/km 59,0 70,0 84,0 106,0 174,0 240,0 332,0 75,0 90,0 108,0 157,0 240,0 355,0 448,0 134,0 175,0 Weight approx. kg/km 131,0 164,0 198,0 252,0 410,0 550,0 756,0 166,0 199,0 229,0 304,0 502,0 709,0 939,0 270,0 335,0  Dimensions and specifications may be changed without prior notice. (RN05) N 84 N JZ-602 RC*-CY special cable for drag chains, 90°C, 600V, two approvals control cable, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Control cable of special-PVC to UL AWM Style10012 (core insulation) Style2587 (jacket insulation) and CSA Ⴠ Temperature range flexing -5 °C to +90 °C fixed installation -40 °C to +90 °C Ⴠ Nominal voltage according to UL + CSA 600 V Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min 20 MOhm x km Ⴠ Minimum bending radius flexing 10x cable ø fixed installation 5x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, extra fine wire conductors, to DINVDE0295 cl.6 col.4, BS6360 cl.5 and IEC60228 cl.6 Ⴠ Special PVC core insulation, YI8 to DINVDE0207 part4 and class43 to UL-Std.1581 Ⴠ Red cores with continuous white figure imprint to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer Ⴠ Cores with optimal selected lay-lenght Ⴠ Core wrapping with fleece over each layer Ⴠ PVC-inner sheath Ⴠ Screening: braid coverage ca. 85% up to 17 mm ø - layer of tinned copper wires >17 mm ø - tinned copper wire Ⴠ Special PVC outer jacket YM5 to DINVDE0207 part5, UL-Style2587 and CSAC22.2 No210 Ⴠ Outer jacket black (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ UV-resistant Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core. Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ unscreened analogue type: JZ-602 RC*, see page N 83   Application These cable are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms. These special cables for drag chains are used for permanent flexible applications in machineries, machine tools, robot technics, for movable automated machinery parts. These cables have shown excellent performance in combination with standard cable trays. The dense screening assures disturbance-free transmission of all signals and impulses. An ideal disturbance-free control cable for the above applications. Interesting for the export-oriented machines and machinery plants. For applications which go beyond standard solutions we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. RC = Robotics Cable. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 89950 89951 89952 89953 89954 89955 89956 89957 89958 89959 89960 89961 89962 89963 89964 89965 89966 89967 89968 89969 89970 89971 89972 89973 89974 89975  No.cores x cross-sec. mm² 3G0,5 4G0,5 5G0,5 7G0,5 9G0,5 12G0,5 15G0,5 18G0,5 25G0,5 3G0,75 4G0,75 5G0,75 7G0,75 9G0,75 12G0,75 15G0,75 18G0,75 25G0,75 34G0,75 3G1,5 4G1,5 5G1,5 7G1,5 9G1,5 12G1,5 18G1,5 AWG-No. Outer Ø approx. mm 20 8,5 20 9,0 20 9,7 20 11,0 20 12,4 20 13,5 20 14,8 20 16,0 20 19,0 18 8,9 18 9,7 18 10,4 18 12,0 18 14,1 18 15,2 18 16,7 18 17,6 18 20,7 18 24,3 16 10,2 16 11,0 16 11,8 16 14,0 16 16,4 16 17,1 16 20,2 Cop. weight kg/km 45,0 52,0 68,0 93,0 134,0 163,0 174,0 191,0 223,0 56,0 81,0 90,0 106,0 161,0 175,0 204,0 241,0 342,0 434,0 89,0 97,0 111,0 147,0 193,0 256,0 360,0 Weight approx. kg/km 124,0 135,0 153,0 191,0 243,0 322,0 350,0 374,0 436,0 130,0 155,0 181,0 208,0 321,0 341,0 396,0 473,0 650,0 781,0 165,0 192,0 224,0 274,0 340,0 461,0 674,0  Dimensions and specifications may be changed without prior notice. (RN05) N 85  Part no. 89976 89977 89984 89978 89985 89979 89986 89980 89987 89981 89988 89982 89983 89989 89990 89991 89992 No.cores x cross-sec. mm² 25G1,5 34G1,5 3G2,5 4G2,5 5G2,5 7G2,5 12G2,5 18G2,5 3G4 4G4 5G4 7G4 4G6 4G10 4G16 4G25 4G35 AWG-No. Outer Ø approx. mm 16 25,2 16 28,1 14 11,8 14 13,2 14 14,2 14 17,4 14 21,0 14 25,4 12 14,0 12 15,9 12 17,7 12 20,9 10 18,3 8 23,2 6 27,6 4 33,1 2 37,8 Cop. weight kg/km 544,0 674,0 141,0 170,0 195,0 251,0 368,0 639,0 180,0 232,0 330,0 395,0 316,0 490,0 850,0 1450,0 1890,0 Weight approx. kg/km 950,0 1203,0 220,0 270,0 350,0 428,0 730,0 1140,0 296,0 456,0 450,0 737,0 572,0 1012,0 1400,0 2100,0 2550,0 JZ-602 RC*-PUR special cable for drag chains, 80°C, 600V, two approvals control cable, meter marking   Technical data Cable structure Properties Ⴠ Control cable of special-PUR to UL CSA AWM I/II A/B Style20939 (jacket insulation) and CSA Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage according to UL + CSA 600 V Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min 20 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Bare copper, extra fine wire conductors, to DINVDE0295 cl.6, BS6360 cl.6 and IEC60228 cl.6 Ⴠ Special PVC core insulation, YI8 to DINVDE0207 part4 and class43 to UL-Std.1581 Ⴠ Black cores with continuous white numbering according to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal selected lay-lenght Ⴠ Core wrapping with fleece over each layer Ⴠ Full-polyurethane outer jacket grey (RAL 7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Resistant to mineral oils, synthetic oils and refrigerants, UV-radiation, oxygene, ozon and hydrolysis. Conditionally resistant to microbes. Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers.  Note Ⴠ G = with green-yellow earth core. Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ screened analogue type: JZ-602 RC* -C-PUR, see page N 91  Application These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist, wet rooms and outdoor. These special cables for drag chains are used for permanent flexible applications in machineries, machine tools, robot technics, for movable automated machinery parts. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. RC = Robotics Cable. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 12630 12631 12632 12633 12634 12635 12636 12637 12638 12639 12640 12641 12642 12643 12644 12645 12646 12647 12648 12649 12650 12651 12652 12653 12654 12655  No.cores x cross-sec. mm² 3G0,5 4G0,5 5G0,5 7G0,5 9G0,5 12G0,5 18G0,5 25G0,5 34G0,5 3G0,75 4G0,75 5G0,75 7G0,75 9G0,75 12G0,75 15G0,75 18G0,75 25G0,75 34G0,75 3G1,5 4G1,5 5G1,5 7G1,5 9G1,5 12G1,5 18G1,5 AWG-No. Outer Ø approx. mm 20 6,0 20 6,5 20 7,1 20 8,2 20 10,0 20 10,5 20 12,5 20 15,2 20 17,1 18 6,6 18 7,1 18 7,8 18 9,2 18 11,0 18 11,5 18 13,2 18 14,0 18 17,2 18 19,1 16 7,4 16 8,0 16 8,8 16 10,8 16 12,8 16 13,5 16 16,0 Cop. weight kg/km 14,0 19,0 24,0 34,0 43,2 58,2 86,0 120,0 163,0 23,8 31,7 39,6 55,4 86,4 95,0 119,0 142,4 197,8 269,0 44,0 58,0 72,0 101,0 129,7 173,0 260,0 Weight approx. kg/km 58,0 69,0 84,0 123,0 177,0 192,0 256,0 358,0 487,0 88,0 101,0 126,0 145,0 168,0 260,0 300,0 360,0 640,0 730,0 94,0 117,0 140,0 186,0 244,0 319,0 451,0  Part no. 12656 12657 12658 12659 12660 12661 12662 12663 12664 12665 12666 12667 12668 12669 12670 12671 No.cores x cross-sec. mm² 25G1,5 34G1,5 3G2,5 4G2,5 5G2,5 7G2,5 12G2,5 3G4 4G4 5G4 7G4 4G6 4G10 4G16 4G25 4G35 AWG-No. Outer Ø approx. mm 16 19,8 16 22,4 14 8,9 14 10,1 14 11,3 14 13,6 14 16,8 12 10,9 12 12,4 12 13,8 12 16,6 10 14,6 8 18,2 6 22,6 4 26,5 2 30,8 Cop. weight kg/km 360,0 490,0 72,0 96,0 120,0 168,0 288,0 115,0 154,0 192,0 269,0 231,0 384,0 615,0 960,0 1344,0 N Weight approx. kg/km 625,0 840,0 150,0 185,0 242,0 293,0 498,0 231,0 298,0 370,0 460,0 430,0 720,0 1060,0 1590,0 2105,0  Dimensions and specifications may be changed without prior notice. (RN05) N 86 MULTIFLEX 512®-PUR UL/CSA special cable for drag chains, 80°C, 600V, two approvals control cable, halogen-free   Technical data Cable structure Properties Ⴠ Special drag chain cables for high mechanical stress, according to UL -Style 20939 Ⴠ Temperature range flexing -40 °C to +80 °C fixed installation -50 °C to +80 °C Ⴠ Nominal voltage UL/CSA 600 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 5x cable ø fixed installation 3x cable ø Ⴠ Alternating bending cycles approx. 10 million Ⴠ Radiation resistance up to 50x106 cJ/kg (up to 50 Mrad) Ⴠ Bare copper, extra fine wire conductors, bunch stranded to DINVDE0295 cl.6, col.4, BS6360 cl.6 and IEC60228 cl.6 Ⴠ Special core insulation, modified TPE Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal selected lay-length Ⴠ Special core wrapping over each layer (up to 4 mm² without core wrapping over the outer layer) Ⴠ Special full-polyurethane outer jacket TMPU, to DINVDE0282 part10 Ⴠ Colour grey (RAL7001) outer surface mat Ⴠ with meter marking, change-over in 2011 Ⴠ Very good oil resistant Ⴠ Guaranteed permanent application in multi-shift operation under extreme high bending stress Ⴠ Adhesion-low Ⴠ High resistant to mechanical strain Ⴠ High property of alternating bending strength Ⴠ Long life durabilities through low friction-resistance by using the TPE insulation Ⴠ High tensile strength-, abrasion- and impact resistant at low temperature Ⴠ Resistant to Weather, Ozone and UV-radiation, Solvents, acids and alkalis, and Hydrolysis Ⴠ PUR-jacket flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB)  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ Cleanroom qualification tested with analog type. Please note "cleanroom qualified" when ordering. Ⴠ screened analogue type: MULTIFLEX 512® -C-PUR UL/CSA, see page N 92  Application These special UL/CSA cables for drag chains are used for permanent flexible applications in machineries, machine tools, robot technics, for movable automated machinery parts and multi-shift operation. Those cables are developed according to the newest state of technology improvement. These high flexible control cables with sliding abilities guaranteed an optimum service life durabilities and also very economic by using the TPE-core insulation and the PUR-outer jacket. The PUR material is adhesion-low and cut-resistant. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 21559 21560 21561 21562 21563 21564 21565 21566 21567 21568 21569 21570  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 12G0,5 18G0,5 20G0,5 25G0,5 30G0,5 36G0,5 2x0,75 AWG-No. Outer Ø approx. mm 20 5,5 20 5,8 20 6,4 20 7,0 20 8,1 20 9,9 20 11,5 20 12,0 20 13,7 20 14,3 20 15,3 18 6,2 Cop. weight kg/km 9,6 14,4 19,0 24,0 33,6 58,0 86,0 96,0 120,0 144,0 172,0 14,4 Weight approx. kg/km 38,0 46,0 59,0 68,0 88,0 131,0 197,0 260,0 282,0 315,0 374,0 47,0  Part no. 21571 21572 21573 21574 21575 21576 21577 21578 21579 21580 No.cores x cross-sec. mm² 3G0,75 4G0,75 5G0,75 7G0,75 12G0,75 18G0,75 20G0,75 25G0,75 30G0,75 36G0,75 AWG-No. Outer Ø approx. mm 18 6,5 18 7,0 18 7,8 18 9,0 18 11,0 18 13,0 18 13,5 18 15,4 18 16,2 18 17,6 Cop. weight kg/km 21,6 29,0 36,0 50,0 86,0 130,0 144,0 180,0 216,0 259,0 Weight approx. kg/km 58,0 69,0 85,0 118,0 183,0 270,0 290,0 374,0 420,0 498,0  Continuation Ⴇ N 87 MULTIFLEX 512®-PUR UL/CSA special cable for drag chains, 80°C, 600V, two approvals control cable, halogen-free  Part no. 21581 21582 21583 21584 21585 21586 21587 21588 21589 21590 21591 21592 21593 21594 21595 21596 21597 21598 21599 21600 21601 21602 21603 21604 21605 21606 21607 21608  No.cores x cross-sec. mm² 2x1 3G1 4G1 5G1 7G1 12G1 18G1 20G1 25G1 30G1 36G1 41G1 50G1 65G1 2x1,5 3G1,5 4G1,5 5G1,5 7G1,5 12G1,5 18G1,5 20G1,5 25G1,5 30G1,5 36G1,5 42G1,5 50G1,5 61G1,5 AWG-No. Outer Ø approx. mm 17 6,9 17 7,4 17 8,0 17 8,7 17 10,2 17 12,6 17 14,8 17 15,8 17 18,1 17 18,5 17 20,1 17 22,0 17 24,0 17 27,2 16 7,6 16 8,1 16 8,7 16 9,7 16 11,3 16 13,8 16 16,3 16 17,3 16 19,8 16 20,3 16 22,2 16 24,0 16 26,2 16 28,9 Cop. weight kg/km 19,2 29,0 38,0 48,0 67,0 115,0 173,0 192,0 240,0 288,0 346,0 410,0 498,0 650,0 29,0 43,0 58,0 72,0 101,0 173,0 259,0 288,0 360,0 432,0 518,0 628,0 749,0 912,0 Weight approx. kg/km 55,0 70,0 86,0 102,0 143,0 225,0 334,0 370,0 460,0 530,0 625,0 779,0 953,0 1205,0 70,0 90,0 106,0 145,0 205,0 320,0 465,0 510,0 650,0 750,0 880,0 1209,0 1449,0 1712,0  Part no. 21609 21610 21611 21612 21613 21614 21615 21616 21617 21618 21619 21620 21621 21622 21623 21624 21625 21626 21627 21628 21629 No.cores x cross-sec. mm² 2x2,5 3G2,5 4G2,5 5G2,5 7G2,5 12G2,5 18G2,5 20G2,5 25G2,5 4G4 5G4 7G4 4G6 5G6 7G6 4G10 5G10 7G10 4G16 5G16 7G16 AWG-No. Outer Ø approx. mm 14 9,2 14 9,7 14 10,5 14 11,6 14 13,8 14 16,9 14 20,0 14 21,2 14 24,4 12 13,2 12 14,6 12 17,6 10 14,4 10 15,9 10 19,2 8 18,4 8 20,7 8 24,7 6 21,3 6 23,8 6 28,6 Cop. weight kg/km 48,0 72,0 96,0 120,0 168,0 288,0 432,0 480,0 600,0 154,0 192,0 79,0 230,0 288,0 403,0 384,0 480,0 672,0 614,0 768,0 1075,0 Weight approx. kg/km 115,0 162,0 196,0 230,0 312,0 532,0 762,0 858,0 998,0 283,0 349,0 498,0 432,0 529,0 782,0 685,0 817,0 1023,0 1042,0 1292,0 1709,0  Dimensions and specifications may be changed without prior notice. (RN05) N N 88 MULTISPEED® 500-PUR UL/CSA safety against high bending in drag chain systems, low torsion, halogen-free, meter marking   Technical data Cable structure Properties Ⴠ Special drag chain cables for high mechanical stress in adapted to DINVDE0281 part13, DINVDE0282 part10 and EDINVDE0245 and UL-Std.758 AWM Style20233 and 20939 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -50 °C to +80 °C Nominal voltage VDE U0/U 300/500 V UL 600 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Bare copper, fine wire conductors, Unilay with short pitch length Ⴠ Special TPE core insulation Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core (3 cores and above) Ⴠ Stranding: <7 cores: cores stranded in a layer with optimal lay-length around a filler as per construction ุ7 cores: cores stranded with optimal lay-length to bunch-construction with low torsion strength, optimal selected short lay-length around a filler Ⴠ Special-PUR outer sheath, especially resistant against fatigue strength, extruded as filler with pressure Ⴠ Sheath colourblack (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ PUR-jacket flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB), VW-1, FT1 Ⴠ low adhesion Ⴠ halogen-free Ⴠ Higher economical solution Ⴠ Reduced ø, results low weight of moving materials Ⴠ Halogen-free Ⴠ High resistant to mechanical strain Ⴠ Long life durabilitys due to low friction-resistance Ⴠ High tensile strength, abrasion- and impact resistance at low temperature Ⴠ Tear resistance Ⴠ High stability Ⴠ Oil resistance Ⴠ Better chemical resistance Ⴠ UV and ozone resistance Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ screened analogue type: MULTISPEED® 500-C-PUR UL/CSA, see page N 94  Application UL/CSA approved HELUKABEL® MULTISPEED 500-PUR are installed there, where the extreme requirements for the cables are necessary. The selected materials and lay-up technique permit these high flexible cables for permanent application in drag chains for long distances, high an slow speed of movements. These cables are installed in dry, moist and wet rooms and in open air with free movement without tensile stress or forced movements. These robust and abrasion resistant special control cables are installed there, where the problems appear for the application in permanent stresses e.g. in energy drag chains, industry robotics, production lines, automatic control systems and permanent movable machinery parts for multi-shift operation. These cables are installed everywhere, where high requirements for the flexibility, abrasion, oxygen and chemical resistance are necessary. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 24370 24371 24372 24373 24374 24375 24376 24377  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 12G0,5 18G0,5 25G0,5 AWG-No. Outer Ø approx. mm 20 4,8 20 5,1 20 5,5 20 6,0 20 9,1 20 10,0 20 12,2 20 14,3 Cop. weight kg/km 9,6 14,4 19,0 24,0 33,6 58,0 86,0 120,0 Weight approx. kg/km 41,0 48,0 62,0 70,0 88,0 131,0 204,0 266,0  Part no. 24378 24379 24380 24381 24382 24383 24384 24385 24386 No.cores x cross-sec. mm² 3G0,75 4G0,75 5G0,75 7G0,75 12G0,75 18G0,75 25G0,75 36G0,75 42G0,75 AWG-No. Outer Ø approx. mm 19 5,2 19 6,1 19 6,6 19 10,5 19 11,4 19 14,2 19 16,3 19 20,1 19 22,2 Cop. weight kg/km 21,6 29,0 36,0 50,0 86,0 130,0 180,0 260,0 302,0 Weight approx. kg/km 51,0 68,0 73,0 92,0 170,0 257,0 280,0 411,0 608,0  Continuation Ⴇ N 89 MULTISPEED® 500-PUR UL/CSA safety against high bending in drag chain systems, low torsion, halogen-free, meter marking   Part no. 24387 24388 24389 24390 24391 24392 24393 24331 24394 24395 24396 24397 24398 24399 24400 24332 No.cores x cross-sec. mm² 3G1 4G1 5G1 7G1 12G1 18G1 25G1 36G1 3G1,5 4G1,5 5G1,5 7G1,5 12G1,5 18G1,5 25G1,5 36G1,5 AWG-No. Outer Ø approx. mm 18 5,9 18 6,4 18 7,0 18 11,2 18 12,3 18 15,1 18 17,6 18 21,6 16 6,7 16 7,3 16 8,0 16 13,2 16 14,4 16 17,7 16 20,5 16 25,6 Cop. weight kg/km 29,0 38,0 48,0 67,0 115,0 173,0 240,0 346,0 43,0 58,0 72,0 101,0 173,0 259,0 360,0 518,0 Weight approx. kg/km 59,0 71,0 84,0 111,0 200,0 286,0 370,0 485,0 81,0 102,0 121,0 164,0 293,0 450,0 631,0 779,0  Part no. 24401 24402 24403 24404 24405 24406 No.cores x cross-sec. mm² 4G2,5 5G2,5 7G2,5 12G2,5 18G2,5 25G2,5 AWG-No. Outer Ø approx. mm 14 8,9 14 9,8 14 16,1 14 17,8 14 21,8 14 24,4 Cop. weight kg/km 86,0 120,0 168,0 288,0 432,0 600,0 Weight approx. kg/km 173,0 220,0 290,0 504,0 719,0 940,0  Dimensions and specifications may be changed without prior notice. (RN05) Terminations and straight-through joints Telephone calbes Low voltage Medium voltage Accessories N You can find terminations and straight-through joints in our catalogue Cable Accessories. Request it now at www.helukabel.de N 90 JZ-602 RC*-C-PUR special cable for drag chains, 80°C, 600V, two approvals control cable, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Control cable of special-PUR to UL CSA AWM I/II A/B Style20939 (jacket insulation) and CSA Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage according to UL+CSA 600 V Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min 20 MOhm x km Ⴠ Minimum bending radius flexing 10x cable ø fixed installation 5x cable ø Ⴠ Radiation resistance up 100x1066 cJ/kg (up to 100 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, extra fine wire conductors, to DINVDE0295 cl.6, BS6360 cl.6 and IEC60228 cl.6 Ⴠ Special PVC core insulation, YI8 to DINVDE0207 part4 and class43 to UL-Std.1581 Ⴠ Black cores with continuous white numbering according to DINVDE0293 Ⴠ Green-yellow earth core in the outer layer Ⴠ Cores with optimal selected lay-lenght Ⴠ Core wrapping with fleece over each layer Ⴠ PVC-inner sheath Ⴠ Screening: up to 17 mm ø - layer of tinned copper wires >17 mm ø - tinned copper wire braid coverage ca. 85% Ⴠ Full-polyurethane outer jacket grey (RAL 7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Resistant to mineral oils, synthetic oils and refrigerants, UV-radiation, oxygene, ozon and hydrolysis. Conditionally resistant to microbes. Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers.  Note Ⴠ G = with green-yellow earth core. Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ unscreened analogue type: JZ-602 RC* PUR, see page N 86  Application These cable are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist, wet rooms and outdoor. These special cables for drag chains are used for permanent flexible applications in machineries, machine tools, robot technics, for movable automated machinery parts. The dense screening assures disturbance-free transmission of all signals and impulses. An ideal disturbance-free control cable for the above applications. For applications which go beyond standard solutions we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. RC = Robotics Cable. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 12680 12681 12682 12683 12684 12685 12686 12687 12688 12689 12690 12691 12692 12693 12694 12695 12696 12697 12698 12699 12700 12701 12702 12703 12704 12705  No.cores x cross-sec. mm² 3G0,5 4G0,5 5G0,5 7G0,5 9G0,5 12G0,5 15G0,5 18G0,5 25G0,5 3G0,75 4G0,75 5G0,75 7G0,75 9G0,75 12G0,75 15G0,75 18G0,75 25G0,75 34G0,75 3G1,5 4G1,5 5G1,5 7G1,5 9G1,5 12G1,5 18G1,5 AWG-No. Outer Ø approx. mm 20 8,5 20 9,0 20 9,7 20 11,0 20 12,4 20 13,5 20 14,8 20 16,0 20 19,0 18 8,9 18 9,7 18 10,4 18 12,0 18 14,1 18 15,2 18 16,7 18 17,6 18 20,7 18 24,3 16 10,2 16 11,0 16 11,8 16 14,0 16 16,4 16 17,1 16 20,2 Cop. weight kg/km 45,0 52,0 68,0 93,0 134,0 163,0 174,0 191,0 223,0 56,0 81,0 90,0 106,0 161,0 175,0 204,0 241,0 342,0 434,0 89,0 97,0 111,0 147,0 193,0 256,0 360,0 Weight approx. kg/km 124,0 135,0 153,0 191,0 243,0 322,0 350,0 374,0 436,0 130,0 155,0 181,0 208,0 321,0 341,0 396,0 473,0 650,0 781,0 165,0 192,0 224,0 274,0 340,0 461,0 674,0  Dimensions and specifications may be changed without prior notice. (RN05) N 91  Part no. 12706 12707 12708 12709 12710 12711 12712 12713 12714 12715 12716 12717 12718 12719 12720 12721 12722 No.cores x cross-sec. mm² 25G1,5 34G1,5 3G2,5 4G2,5 5G2,5 7G2,5 12G2,5 18G2,5 3G4 4G4 5G4 7G4 4G6 4G10 4G16 4G25 4G35 AWG-No. Outer Ø approx. mm 16 25,2 16 28,1 14 11,8 14 13,2 14 14,2 14 17,4 14 21,0 14 25,4 12 14,0 12 15,9 12 17,7 12 20,9 10 18,3 8 23,2 6 27,6 4 33,1 2 37,8 Cop. weight kg/km 544,0 674,0 141,0 170,0 195,0 251,0 368,0 639,0 180,0 232,0 330,0 395,0 316,0 490,0 850,0 1450,0 1890,0 Weight approx. kg/km 950,0 1203,0 220,0 270,0 350,0 428,0 730,0 1140,0 296,0 456,0 450,0 737,0 572,0 1012,0 1400,0 2100,0 2550,0 MULTIFLEX 512®-C-PUR UL/CSA special cable for drag chains, 80°C, 600V, two approvals control cable, EMC-preferred type, halogen-free, meter marking   Technical data Cable structure Properties Ⴠ Special cables for drag chains with high degree of resistance to mechanical stress according to UL -Style -20939 Ⴠ Temperature range flexing -40 °C to +80 °C fixed installation -50 °C to +80 °C Ⴠ Nominal voltage UL/CSA 600 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Test of alternating bending cycles approx. 10 million Ⴠ Radiation resistance up to 50x106 cJ/kg (up to 50 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper, extra fine wire conductors, bunch stranded to DINVDE0295 cl.6, col.4, BS6360 cl.6 and IEC60228 cl.6 Ⴠ Special core insulation, modified TPE Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer (3 cores and above) Ⴠ Cores stranded in layers with optimal selected lay-length Ⴠ Special core wrapping over each layers and an additional fleece over outer layer Ⴠ TPE-inner sheath, halogen-free Ⴠ Wrapping with special tapes Ⴠ Tinned copper braided screening , approx. 85% coverage Ⴠ Special core wrapping of fleece (up to 4 mm² without core wrapping over the outer layer Ⴠ Special full-polyurethane outer jacket TMPU, to DINVDE0282 part10, appendixA Ⴠ Colour grey (RAL 7001) outer surface mat Ⴠ with meter marking, change-over in 2011 Ⴠ Very good oil resistant, test method according to DIN VDE 0472 part 803 Ⴠ Guaranteed permanent application in multi-shift operation under extreme high bending stress Ⴠ Adhesion-low Ⴠ High resistant to mechanical strain Ⴠ High property of alternating bending strength Ⴠ Long life durabilities through low friction-resistance by using the TPE insulation Ⴠ High tensile strength-, abrasion- and impact resistant at low temperature Ⴠ Resistant to Weather, Ozone and UV-radiation, Solvents, acids and alkalis, Hydraulic liquidity and Hydrolysis Ⴠ PUR-jacket flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ Please note the cleanroom qualification when ordering. Ⴠ unscreened analogue type: MULTIFLEX 512® PUR UL/CSA, see page N 87  Application The special screened UL/CSA cables for drag chains are mainly applied for impulse transmission to prevent external interference effects and used for permanent flexible applications in machineries, machine tools, robot technics, for movable automated machinery parts and multi-shift operation. Those cables are developed according to the newest state of technology improvement. These high flexible control cables with sliding abilities guaranteed an optimum service life durabilities and also very economic by using the TPE-core insulation and the PUR-outer jacket which is adhesive-free and cut-resistant. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 21630 21631 21632 21633 21634 21635  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 12G0,5 AWG-No. Outer Ø approx. mm 20 8,3 20 8,5 20 9,0 20 9,7 20 11,1 20 12,7 Cop. weight kg/km 30,0 38,0 50,0 65,0 70,0 100,0 Weight approx. kg/km 90,0 105,0 124,0 132,0 175,0 250,0  Part no. 21636 21637 21638 21639 21640 No.cores x cross-sec. mm² 18G0,5 20G0,5 25G0,5 30G0,5 36G0,5 AWG-No. Outer Ø approx. mm 20 14,7 20 15,4 20 17,1 20 17,9 20 19,2 Cop. weight kg/km 157,0 167,0 240,0 273,0 306,0 Weight approx. kg/km 325,0 350,0 450,0 510,0 580,0  Continuation Ⴇ N 92 N MULTIFLEX 512®-C-PUR UL/CSA special cable for drag chains, 80°C, 600V, two approvals control cable, EMC-preferred type, halogen-free, meter marking  Part no. 21641 21642 21643 21644 21645 21646 21647 21648 21649 21650 21651 21652 21653 21654 21655 21656 21657 21658 21659 21660 21661 21662 21663 21664 21665 21666 21667 21668 21669 21670 21671 21672 21673  No.cores x cross-sec. mm² 2x0,75 3G0,75 4G0,75 5G0,75 7G0,75 12G0,75 18G0,75 20G0,75 25G0,75 30G0,75 36G0,75 2x1 3G1 4G1 5G1 7G1 12G1 18G1 20G1 25G1 30G1 36G1 41G1 50G1 65G1 2x1,5 3G1,5 4G1,5 5G1,5 7G1,5 12G1,5 18G1,5 25G1,5 AWG-No. Outer Ø approx. mm 18 8,8 18 9,3 18 9,7 18 10,5 18 11,9 18 14,2 18 16,3 18 16,9 18 19,2 18 19,7 18 21,2 17 9,7 17 10,0 17 10,8 17 11,7 17 13,4 17 16,0 17 18,5 17 19,4 17 21,7 17 22,5 17 24,3 17 26,1 17 28,4 17 32,2 16 10,2 16 11,0 16 11,6 16 12,6 16 14,5 16 17,4 16 19,9 16 23,7 Cop. weight kg/km 39,0 49,0 60,0 70,0 95,0 140,0 220,0 249,0 313,0 470,0 500,0 50,0 60,0 73,0 81,0 114,0 186,0 254,0 322,0 377,0 429,0 516,0 610,0 690,0 852,0 64,0 84,0 99,0 129,0 148,0 279,0 393,0 584,0 Weight approx. kg/km 110,0 120,0 148,0 160,0 205,0 308,0 420,0 450,0 579,0 630,0 745,0 120,0 135,0 173,0 187,0 240,0 360,0 498,0 568,0 670,0 774,0 895,0 1032,0 1160,0 1660,0 145,0 168,0 217,0 235,0 325,0 481,0 675,0 927,0  Dimensions and specifications may be changed without prior notice. (RN05) N 93  Part no. 21674 21675 21676 21677 21678 21679 21680 21681 21682 21683 21684 21685 21686 21687 21688 21689 21690 21691 21692 21693 21694 21695 21696 21697 21698 21699 No.cores x cross-sec. mm² 30G1,5 36G1,5 42G1,5 50G1,5 61G1,5 2x2,5 3G2,5 4G2,5 5G2,5 7G2,5 12G2,5 18G2,5 20G2,5 25G2,5 4G4 5G4 7G4 4G6 5G6 7G6 4G10 5G10 7G10 4G16 5G16 7G16 AWG-No. Outer Ø approx. mm 16 24,6 16 26,4 16 28,4 16 31,2 16 34,2 14 11,9 14 12,6 14 13,6 14 14,7 14 17,4 14 20,9 14 24,2 14 25,6 14 29,1 12 16,8 12 18,4 12 21,6 10 18,1 10 19,6 10 23,2 8 22,5 8 24,7 8 29,3 6 25,7 6 28,2 6 33,6 Cop. weight kg/km 607,0 702,0 829,0 1025,0 1190,0 104,0 140,0 164,0 190,0 236,0 390,0 607,0 661,0 796,0 222,0 328,0 360,0 305,0 441,0 505,0 485,0 610,0 820,0 840,0 1050,0 1510,0 Weight approx. kg/km 1025,0 1210,0 1441,0 1709,0 2025,0 198,0 284,0 378,0 423,0 486,0 756,0 1127,0 1210,0 1530,0 448,0 533,0 678,0 636,0 772,0 1028,0 1052,0 1096,0 1530,0 1386,0 1759,0 2087,0 MULTISPEED® 500-C-PUR UL/CSA safety against high bending in drag chain systems, low torsion, halogen-free, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special drag chain cables for high mechanical stress in adapted to DINVDE0281 part13, DINVDE0282 part10 and EDINVDE0245 and UL-Std.758 AWM Style20939 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -50 °C to +80 °C Nominal voltage VDE U0/U 300/500 V UL 600 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Coupling resistant max. 250 Ohm/km Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Bare copper, fine wire conductors, Unilay with short pitch length Ⴠ Special TPE core insulation Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core (3 cores and above) Ⴠ Stranding: <7 cores: cores stranded in a layer with optimal lay-length around a filler as per construction ุ7 cores: cores stranded with optimal lay-length to bunch-construction with low torsion strength, optimal selected short lay-length around a filler Ⴠ Special-TPE-O inner sheath, extruded as filler with pressure, grey RAL7001 Ⴠ Tinned copper braided screen, coverage 85% max., with optimal pitch Ⴠ Special-PUR outer sheath Ⴠ Sheath colour black (RAL 9005) Ⴠ with meter marking, change-over in 2011  Ⴠ PUR-jacket flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB), VW-1, FT1 Ⴠ Low adhesion Ⴠ High resistant to mechanical strain Ⴠ Long life durabilitys due to low friction-resistance Ⴠ High tensile strength, abrasion- and impact resistance at low temperature Ⴠ Tear resistance Ⴠ High stability Ⴠ Oil resistance Ⴠ Better chemical resistance Ⴠ UV and ozone resistance Ⴠ Higher economical solution Ⴠ Reduced ø, results low weight of moving materials Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers.   Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ unscreened analogue type: MULTISPEED® 500-PUR UL/CSA, see page N 89  Application UL/CSA approved HELUKABEL® MULTISPEED 500-C-PUR are installed there, where the extreme requirements for the cables are necessary. Designed for the export-orientated machinery manufacturer, specifically for USA and Canada. The selected materials and lay-up technique permit these high flexible cables for permanent application in drag chains for long distances, high an slow speed of movements. These cables are installed in dry, moist and wet rooms and in open air with free movement without tensile stress or forced movements. These robust and abrasion resistant special control cables are installed there, where the problems appear for the application in permanent stresses e.g. in energy drag chains, industry robotics, production lines, automatic control systems and permanent movable machinery parts for multi-shift operation. These cables are installed everywhere, where high requirements for the flexibility, abrasion, oxygen and chemical resistance are necessary. These screened cables are particularly suitable for the interference-free transmission in instrumentation and control engineering applications. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 24410 24411 24412 24413 24414 24415 24416 24417 24418  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 9G0,5 12G0,5 18G0,5 25G0,5 AWG-No. Outer Ø approx. mm 20 6,6 20 6,9 20 7,3 20 7,8 20 11,3 20 11,4 20 12,6 20 15,0 20 17,5 Cop. weight kg/km 30,0 36,0 42,0 48,0 64,0 80,0 105,0 137,0 210,0 Weight approx. kg/km 90,0 104,0 118,0 148,0 184,0 219,0 276,0 378,0 547,0  Part no. 24419 24420 24421 24422 24423 24424 24425 24426 No.cores x cross-sec. mm² 2x0,75 3G0,75 4G0,75 5G0,75 7G0,75 12G0,75 18G0,75 25G0,75 AWG-No. Outer Ø approx. mm 19 6,8 19 7,4 19 8,0 19 8,5 19 12,9 19 14,4 19 17,5 19 19,9 Cop. weight kg/km 40,0 48,0 55,0 66,0 85,0 135,0 190,0 275,0 Weight approx. kg/km 100,0 117,0 143,0 167,0 229,0 319,0 492,0 659,0  Continuation Ⴇ N 94 N MULTISPEED® 500-C-PUR UL/CSA safety against high bending in drag chain systems, low torsion, halogen-free, EMC-preferred type, meter marking   Part no. 24427 24428 24429 24430 24431 24432 24433 24434 24333 24435 No.cores x cross-sec. mm² 2x1 3G1 4G1 5G1 7G1 12G1 18G1 25G1 36G1 3G1,5 AWG-No. Outer Ø approx. mm 18 7,1 18 7,7 18 8,3 18 9,1 18 14,0 18 15,0 18 18,7 18 21,4 18 26,1 16 8,6 Cop. weight kg/km 50,0 59,0 70,0 84,0 106,0 174,0 240,0 332,0 436,0 75,0 Weight approx. kg/km 120,0 140,0 167,0 201,0 256,0 417,0 557,0 766,0 840,0 170,0  Part no. 24436 24437 24438 24439 24440 24441 24334 24442 24443 24444 No.cores x cross-sec. mm² 4G1,5 5G1,5 7G1,5 12G1,5 18G1,5 25G1,5 36G1,5 4G2,5 5G2,5 7G2,5 AWG-No. Outer Ø approx. mm 16 9,4 16 10,4 16 16,0 16 17,6 16 21,3 16 24,8 16 30,3 14 11,3 14 12,3 14 19,9 Cop. weight kg/km 90,0 108,0 157,0 240,0 355,0 448,0 592,0 134,0 175,0 229,0  Dimensions and specifications may be changed without prior notice. (RN05) Bundling, binding, fastening Plastic helix Cable tie Hook and loop cable tie Mounting block You can find bundling, binding, fastening in our catalogue Cable Accessories. Request it now at www.helukabel.de N 95 Weight approx. kg/km 204,0 236,0 309,0 509,0 718,0 944,0 1070,0 280,0 346,0 410,0 MULTISPEED® 500-TPE UL/CSA high flexible, safety against high bending in drag chain systems, low torsion, halogen-free, meter marking   Technical data Cable structure Properties Ⴠ Special drag chain cables for high mechanical stress in adapted to DINVDE0281 part13 and EDINVDE0245 and UL-Std.758 AWM Style20841 and 21184 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -50 °C to +80 °C Ⴠ Nominal voltage VDE U0/U 300/500 V UL 600 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 5x cable ø fixed installation 3x cable ø Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Tinned copper, fine wire conductors, Unilay with short pitch length Ⴠ Special TPE core insulation Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core (3 cores and above) Ⴠ Stranding: <7 cores: cores stranded in a layer with optimal lay-length around a filler as per construction ุ7 cores: cores stranded with optimal lay-length to bunch-construction with low torsion strength, optimal selected short lay-length around a filler Ⴠ Special-TPE-O outer sheath, extruded as filler with pressure Ⴠ Sheath colour ocean blue (RAL 5020) Ⴠ with meter marking, change-over in 2011 Ⴠ TPE: The selected tinned copper wire conductor permits the installation in aggressive environments as well as hydrogen sulfide, ammonia and sulfur dioxide Ⴠ Microbe-resistance - TPE Ⴠ Low adhesion Ⴠ High property of alternating bending strength Ⴠ High resistant to mechanical strain Ⴠ Long life durabilitys due to low friction-resistance Ⴠ High tensile strength, abrasion- and impact resistance at low temperature Ⴠ Extremely high continuous bending loads Ⴠ Tear resistance Ⴠ High stability Ⴠ Oil resistance Ⴠ Better chemical resistance Ⴠ UV and ozone resistance Ⴠ Higher economical solution Ⴠ Reduced ø, results low weight of moving materials Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ Cleanroom qualification tested with analog type. Please note "cleanroom qualified" when ordering. Ⴠ screened analogue type: MULTISPEED® 500-C-TPE UL/CSA, see page N 98  Application The selected materials and lay-up technique permit these high flexible cables for permanent application in drag chains for long distances, high an slow speed of movements. These cables are installed in dry, moist and wet rooms and in open air with free movement without tensile stress or forced movements. These robust and abrasion resistant special control cables are installed there, where the problems appear for the application in permanent stresses e.g. in energy drag chains, industry robotics, production lines, automatic control systems and permanent movable machinery parts for multi-shift operation. These cables are installed everywhere, where high requirements for the flexibility, abrasion, oxygen and chemical resistance are necessary. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 24450 24451 24452 24453 24454 24455 24456 24457  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 12G0,5 18G0,5 25G0,5 AWG-No. Outer Ø approx. mm 20 4,7 20 5,0 20 5,4 20 5,8 20 8,9 20 9,8 20 11,9 20 13,9 Cop. weight kg/km 9,6 14,4 19,0 24,0 33,6 58,0 86,0 120,0 Weight approx. kg/km 42,0 49,0 63,0 70,0 90,0 134,0 209,0 270,0  Part no. 24458 24459 24460 24461 24462 24463 24464 24465 24466 24467 No.cores x cross-sec. mm² 2x0,75 3G0,75 4G0,75 5G0,75 7G0,75 12G0,75 18G0,75 25G0,75 36G0,75 42G0,75 AWG-No. Outer Ø approx. mm 19 5,0 19 5,2 19 6,1 19 6,6 19 10,5 19 11,4 19 14,2 19 16,3 19 19,5 19 21,3 Cop. weight kg/km 14,4 21,6 29,0 36,0 50,0 86,0 130,0 180,0 260,0 302,0 Weight approx. kg/km 47,0 55,0 70,0 74,0 95,0 174,0 261,0 290,0 419,0 614,0  Continuation Ⴇ N 96 N MULTISPEED® 500-TPE UL/CSA high flexible, safety against high bending in drag chain systems, low torsion, halogen-free, meter marking   Part no. 24468 24469 24470 24471 24472 24473 24474 24475 24476 24477 24478 No.cores x cross-sec. mm² 2x1 3G1 4G1 5G1 7G1 12G1 18G1 25G1 3G1,5 4G1,5 5G1,5 AWG-No. Outer Ø approx. mm 18 5,2 18 5,9 18 6,4 18 7,0 18 11,2 18 12,3 18 15,1 18 17,6 16 6,7 16 7,3 16 8,0 Cop. weight kg/km 19,2 29,0 38,0 48,0 67,0 115,0 173,0 240,0 43,0 58,0 72,0 Weight approx. kg/km 50,0 60,0 74,0 86,0 114,0 210,0 291,0 380,0 84,0 108,0 126,0  Part no. 24479 24480 24481 24482 24483 24484 24485 24486 24487 24488 No.cores x cross-sec. mm² 7G1,5 12G1,5 18G1,5 25G1,5 4G2,5 5G2,5 7G2,5 12G2,5 18G2,5 25G2,5  Dimensions and specifications may be changed without prior notice. (RN05) Marking Marking rings Cable marker Indian pen You can find marking in our catalogue Cable Accessories. Request it now at www.helukabel.de N 97 AWG-No. Outer Ø approx. mm 16 13,2 16 14,4 16 17,7 16 19,8 14 8,9 14 9,8 14 16,1 14 17,8 14 21,8 14 24,4 Cop. weight kg/km 101,0 173,0 259,0 360,0 96,0 120,0 168,0 288,0 432,0 600,0 Weight approx. kg/km 169,0 299,0 460,0 640,0 179,0 230,0 294,0 510,0 722,0 950,0 MULTISPEED® 500-C-TPE UL/CSA safety against high bending in drag chain systems, low torsion, halogen-free, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special drag chain cables for high mechanical stress in adapted to DINVDE0281 part13 and EDINVDE0245 and UL-Std.758 AWM Style21184 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -50 °C to +80 °C Ⴠ Nominal voltage U0/U 300/500 V UL 600 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 5x cable ø fixed installation 3x cable ø Ⴠ Coupling resistance max. 250 Ohm x km Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Tinned copper, fine wire conductors, Unilay with short pitch length Ⴠ Special TPE core insulation Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core (3 cores and above) Ⴠ Stranding: <7 cores: cores stranded in a layer with optimal lay-length around a filler as per construction ุ7 cores: cores stranded with optimal lay-length to bunch-construction with low torsion strength, optimal selected short lay-length around a filler Ⴠ Special-TPE-O inner sheath, extruded as filler with pressure, natural colour Ⴠ Screen of Cu braid tinned, coverage 85% max., with optimal pitch Ⴠ Special-TPE-O outer sheath, extruded as filler with pressure Ⴠ Sheath colour ocean blue (RAL 5020) Ⴠ with meter marking, change-over in 2011 Ⴠ TPE: The selected tinned copper wire conductor and tinned copper wire braid permit the installation in aggressive environments as well as hydrogen sulfide, ammonia and sulfur dioxide.  Ⴠ Microbe-resistance - TPE Ⴠ High property of alternating bending strength Ⴠ High resistant to mechanical strain Ⴠ Long life durabilitys due to low friction-resistance Ⴠ High tensile strength, abrasion- and impact resistance at low temperature Ⴠ Extremely high continuous bending loads Ⴠ Low adhesion Ⴠ Tear resistance Ⴠ High stability Ⴠ Oil resistance Ⴠ Better chemical resistance Ⴠ UV and ozone resistance Ⴠ Higher economical solution Ⴠ Reduced ø, results low weight of moving materials Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers.   Application Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ Please note the cleanroom qualification when ordering. Ⴠ unscreened analogue type: MULTISPEED® 500-TPE UL/CSA, see page N 96 The selected materials and lay-up technique permit these high flexible cables for permanent application in drag chains for long distances, high and slow speed of movements. These cables are installed in dry, moist and wet rooms and in open air with free movement without tensile stress or forced movements. These robust and abrasion resistant special control cables are installed there, where the problems appear for the application in permanent stresses e.g. in energy drag chains, industry robotics, production lines, automatic control systems and permanent movable machinery parts for multi-shift operation. These cables are installed everywhere, where high requirements for the flexibility, abrasion, oxygen and chemical resistance are necessary. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 23914 23915 23916 23917 23918 23919 23920 23921 23922  No.cores x cross-sec. mm² 2x0,5 3G0,5 4G0,5 5G0,5 7G0,5 10G0,5 12G0,5 18G0,5 25G0,5 AWG-No. Outer Ø approx. mm 20 6,4 20 6,7 20 7,3 20 7,7 20 11,3 20 10,1 20 12,4 20 14,7 20 17,1 Cop. weight kg/km 30,0 36,0 42,0 48,0 64,0 80,0 105,0 137,0 320,0 Weight approx. kg/km 85,0 99,0 107,0 140,0 176,0 204,0 261,0 360,0 530,0  Part no. 23923 23924 23925 23926 23927 23928 23929 23930 No.cores x cross-sec. mm² 2x0,75 3G0,75 4G0,75 5G0,75 7G0,75 12G0,75 18G0,75 25G0,75 AWG-No. Outer Ø approx. mm 19 7,0 19 7,4 19 8,0 19 8,5 19 12,9 19 14,4 19 17,2 19 19,9 Cop. weight kg/km 40,0 48,0 55,0 66,0 85,0 135,0 190,0 275,0 Weight approx. kg/km 97,0 110,0 139,0 160,0 219,0 307,0 490,0 640,0  Continuation Ⴇ N 98 N MULTISPEED® 500-C-TPE UL/CSA safety against high bending in drag chain systems, low torsion, halogen-free, EMC-preferred type, meter marking   Part no. 23931 23932 23933 23934 23935 23936 23937 23938 23939 23940 No.cores x cross-sec. mm² 2x1 3G1 4G1 5G1 7G1 12G1 18G1 25G1 3G1,5 4G1,5 AWG-No. Outer Ø approx. mm 18 7,4 18 7,7 18 8,3 18 9,1 18 14,0 18 15,0 18 18,5 18 21,4 16 8,6 16 9,4 Cop. weight kg/km 50,0 59,0 70,0 84,0 106,0 174,0 240,0 332,0 75,0 90,0 Weight approx. kg/km 115,0 131,0 160,0 195,0 247,0 411,0 547,0 754,0 160,0 194,0  Part no. 23941 23942 23943 23944 23945 23946 23947 23948 23949 No.cores x cross-sec. mm² 5G1,5 7G1,5 12G1,5 18G1,5 25G1,5 4G2,5 5G2,5 7G2,5 12G2,5 AWG-No. Outer Ø approx. mm 16 10,4 16 16,0 16 17,6 16 21,3 16 24,8 14 11,3 14 12,3 14 14,8 14 21,5 Cop. weight kg/km 108,0 157,0 240,0 355,0 448,0 134,0 175,0 229,0 390,0  Dimensions and specifications may be changed without prior notice. (RN05) Core end sleeves and cable lugs Core end sleeves Solderless terminals Tubular cable lugs Compression joints You can find core end sleeves and cable lugs in our catalogue Cable Accessories. Request it now at www.helukabel.de N 99 Weight approx. kg/km 220,0 294,0 490,0 704,0 930,0 260,0 330,0 406,0 990,0 SUPERTRONIC-310-PVC special cable for drag chains, meter marking   Technical data Cable structure Properties Ⴠ Special PVC drag chain cable approved to UL-Style2464 Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage 1500 V Ⴠ Breakdown voltage min. 3000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius flexing 5x cable ø fixed installation 3x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper conductor, fine wire Unilay with short lay-lengths Ⴠ PVC core insulation, class43 acc. to ULstd.1581 Ⴠ Colour coded to DIN47100 Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Core wrapping from fleece between the layers of stranding Ⴠ PVC outer jacket, oil resistant. TM5 acc. to DINVDE0281 Part1 or class43 acc. to ULstd.1581 Ⴠ Sheath colour grey (RAL7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Low-adhesion Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ Please observe applicable installation regulations for use in energy supply chains.  Application A highly-flexible PVC control cable suitable for frequent and fast lifting and bending stresses in machines and tool building, robot systems and on constantly moving machine components. Long service lives guarantee reliable function and good cost efficiency. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. Designed for machines intended for export, specifically USA and Canada. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 49885 2x0,14 49886 3x0,14 49887 4x0,14 49888 5x0,14 49889 7x0,14 49890 10x0,14 49891 12x0,14 49892 14x0,14 49893 18x0,14 49894 24x0,14 49895 25x0,14 49896 2x0,25 49897 3x0,25 49898 4x0,25 49899 5x0,25 49900 7x0,25 49901 10x0,25 49902 12x0,25  AWG-No. 26 26 26 26 26 26 26 26 26 26 26 24 24 24 24 24 24 24 Outer Ø Cop. approx. mm weight kg/km 3,7 2,8 3,9 4,1 4,1 5,6 4,5 7,0 5,1 9,8 5,8 14,0 6,0 16,8 6,2 19,6 6,9 25,2 7,8 33,6 8,3 35,0 4,0 5,0 4,2 7,5 4,5 10,0 4,9 12,5 5,6 17,5 6,4 25,0 6,6 30,1 Weight approx. kg/km 24,0 26,0 31,0 36,0 50,0 65,0 72,0 78,0 91,0 120,0 125,0 29,0 34,0 40,0 51,0 65,0 85,0 97,0  Part no. No.cores x cross-sec. mm² 49903 14x0,25 49904 18x0,25 49905 24x0,25 49906 25x0,25 49907 2x0,34 49908 3x0,34 49909 4x0,34 49910 5x0,34 49911 7x0,34 49912 10x0,34 49913 12x0,34 49914 14x0,34 49915 18x0,34 49916 24x0,34 49917 25x0,34 AWG-No. 24 24 24 24 22 22 22 22 22 22 22 22 22 22 22 Outer Ø Cop. approx. mm weight kg/km 6,9 35,0 7,6 45,0 8,8 60,0 9,4 62,5 4,2 6,8 4,4 10,2 4,8 13,6 5,1 17,0 5,9 23,8 6,8 34,0 7,0 40,8 7,4 47,6 8,1 61,2 9,6 81,5 10,0 85,0 Weight approx. kg/km 109,0 132,0 171,0 178,0 34,0 43,0 58,0 65,0 85,0 117,0 134,0 152,0 184,0 242,0 252,0 N  Dimensions and specifications may be changed without prior notice. (RN05) N 100 SUPERTRONIC-310-C-PVC special cable for drag chains, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special PVC drag chain cable approved to UL-Style2464 Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage core/core 1500 V core/screen 1000 V Ⴠ Breakdown voltage min. 3000 V Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper conductor, fine wire Unilay with short lay-lengths Ⴠ PVC core insulation, class43 acc. to ULstd.1581 Ⴠ Colour coded to DIN 47100 Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Core wrapping from fleece between the layers of stranding Ⴠ Core wrapping over the outer layer Ⴠ Braided screen of tinned Cu wires, coverage approx. 85% Ⴠ Core wrapping with fleece Ⴠ PVC outer jacket, oil resistant, TM5 acc. to DINVDE0281 Part1 or class43 acc. to ULstd.1581 Ⴠ Sheath colour grey (RAL 7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Low-adhesion Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ Please observe applicable installation regulations for use in energy supply chains.  Application A highly-flexible PVC control cable suitable for frequent and fast lifting and bending stresses in machines and tool building, robot systems and on constantly moving machine components. Long service lives guarantee reliable function and good cost efficiency. The copper screen effectively protects against internal and external interference. Designed for machines intended for export, specifically USA and Canada. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 49920 2x0,14 49921 3x0,14 49922 4x0,14 49923 5x0,14 49924 7x0,14 49925 10x0,14 49926 12x0,14 49927 14x0,14 49928 18x0,14 49929 24x0,14 49930 25x0,14 49931 2x0,25 49932 3x0,25 49933 4x0,25 49934 5x0,25 49935 7x0,25 49936 10x0,25 49937 12x0,25  AWG-No. 26 26 26 26 26 26 26 26 26 26 26 24 24 24 24 24 24 24 Outer Ø Cop. approx. mm weight kg/km 4,3 11,3 4,5 14,2 4,7 15,5 5,0 18,4 5,7 27,9 6,4 39,1 6,7 42,2 6,9 45,4 7,6 54,2 8,6 66,5 9,0 68,5 4,6 14,8 4,8 18,9 5,1 21,4 5,5 31,2 6,2 39,8 7,1 53,9 7,3 59,2 Weight approx. kg/km 33,0 36,0 41,0 46,0 70,0 88,0 97,0 105,0 116,0 150,0 157,0 39,0 45,0 52,0 70,0 80,0 114,0 123,0  Dimensions and specifications may be changed without prior notice. (RN05) N 101  Part no. No.cores x cross-sec. mm² 49938 14x0,25 49939 18x0,25 49940 24x0,25 49941 25x0,25 49942 2x0,34 49943 3x0,34 49944 4x0,34 49945 5x0,34 49946 7x0,34 49947 10x0,34 49948 12x0,34 49949 14x0,34 49950 18x0,34 49951 24x0,34 49952 25x0,34 AWG-No. 24 24 24 24 22 22 22 22 22 22 22 22 22 22 22 Outer Ø Cop. approx. mm weight kg/km 7,6 64,3 8,3 78,6 9,7 89,8 10,1 101,2 4,8 18,2 5,0 28,8 5,4 35,8 5,7 39,2 6,6 52,8 7,5 67,5 7,7 76,5 8,1 85,9 8,9 99,9 10,3 147,0 10,9 155,0 Weight approx. kg/km 138,0 165,0 200,0 204,0 44,0 60,0 76,0 80,0 104,0 150,0 160,0 180,0 211,0 290,0 304,0 SUPERTRONIC-330 PURö cable for drag chains, halogen-free, meter marking   Technical data Cable structure Properties Ⴠ Special PUR sheathed cable Ⴠ Temperature range flexing -40 °C to +80 °C fixed -50 °C to +80 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage core/core 1500 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Capacitance core/core 60 nF/km Ⴠ Minimum bending radius flexing 5 x cable ø fixed 3 x cable ø Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad)  Ⴠ Bare copper, extra fine-wire to DINVDE0295 cl.6, col.4, BS6360 cl.6 Ⴠ Polyolefine core insulation Ⴠ Cores stranded in layers with optimally adjusted lay-lengths Ⴠ Cores colour coded to DIN47100 Ⴠ Foil wrapping over the outer layer Ⴠ Special full-polyurethane outer sheath TMPU to DINVDE0282 Part10, AnnexA and acc. to ULstd.1581 Tab.50227 80 °C Ⴠ Sheath colour grey (RAL7001) Ⴠ with meter marking, change-over in 2011 Ⴠ PUR flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ Low adhesion Ⴠ High flexibility at low temperatures Ⴠ High abrasion resistance Ⴠ Tear and cut-resistant Ⴠ Notch resistant Ⴠ Resistant to UV-radiation, Oxygen, Ozone, Hydrolysis, Oil Ⴠ Partially resistant to Microbial attack, Hydraulic fluids, Coolant emulsion, Alkalis Ⴠ The materials used in manufacture are silicon and cadmium-free and contain no substances harmful to the wetting properties of lacquers  Application For installation in dry, moist and wet rooms and outdoors with free movement without tensile stress or forced movements, impressively proven in drag chain application. A highly flexible PUR control cable, suitable for frequent and quick lifting and bending stresses in machine engineering and construction, in robot technology and on permanently moving machine components. Long service life guarantees reliable function and high cost-efficiency. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. Attractive for export-oriented mechanical engineering. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 49764 2x0,14 49765 3x0,14 49766 4x0,14 49767 5x0,14 49768 7x0,14 49769 10x0,14 49770 12x0,14 49771 14x0,14 49772 18x0,14 49773 24x0,14 49774 25x0,14 49775 2x0,25 49776 3x0,25 49777 4x0,25 49778 5x0,25 49779 7x0,25 49780 10x0,25 49781 12x0,25  AWG-No. 26 26 26 26 26 26 26 26 26 26 26 24 24 24 24 24 24 24 Outer Ø Cop. approx. mm weight kg/km 3,9 2,8 4,0 4,1 4,3 5,6 4,7 7,0 5,3 9,8 6,1 14,0 6,2 16,8 6,5 19,6 7,2 25,2 8,2 33,6 8,6 35,0 4,3 5,0 4,5 7,5 4,8 10,0 5,2 12,5 6,0 17,5 6,9 25,0 7,1 30,1 Weight approx. kg/km 22,0 24,0 29,0 33,0 47,0 57,0 63,0 72,0 80,0 110,0 115,0 26,0 30,0 39,0 44,0 52,0 70,0 84,0  Part no. No.cores x cross-sec. mm² 49782 14x0,25 49783 18x0,25 49784 24x0,25 49785 25x0,25 49786 2x0,34 49787 3x0,34 49788 4x0,34 49789 5x0,34 49790 7x0,34 49791 10x0,34 49792 12x0,34 49793 14x0,34 49794 18x0,34 49795 24x0,34 49796 25x0,34 AWG-No. 24 24 24 24 22 22 22 22 22 22 22 22 22 22 22 Outer Ø Cop. approx. mm weight kg/km 7,4 35,0 8,2 45,0 9,6 60,0 10,1 62,5 4,6 6,8 4,8 10,2 5,2 13,6 5,6 17,0 6,5 23,8 7,5 34,0 7,7 40,8 8,1 47,6 9,2 61,2 10,7 81,5 11,2 85,0 Weight approx. kg/km 97,0 114,0 157,0 160,0 31,0 38,0 51,0 54,0 77,0 104,0 122,0 140,0 162,0 204,0 229,0  Dimensions and specifications may be changed without prior notice. (RN05) N 102 N SUPERTRONIC-330 C-PURö cable for drag chains, halogen-free, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special PUR sheathed cable, screened Ⴠ Temperature range flexing -40 °C to +80 °C fixed -50 °C to +80 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage core/core 1500 V core/screen 1000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Capacitance core/core 60 nF/km Ⴠ Minimum bending radius flexing 7,5 x cable ø fixed 4 x cable ø Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Bare copper conductor, extra fine wire to DINVDE0295 cl.6, col.4, BS6360 cl.6 Ⴠ Polyolefine core insulation Ⴠ Colour coded to DIN47100 Ⴠ Cores stranded in layers with optimal lay-length Ⴠ Wrapping over the outer layer Ⴠ Braided screen of tinned Cu wires, coverage approx. 85% Ⴠ Core wrapping with fleece Ⴠ Special full polyurethane outer sheath TMPU acc. to DINVDE0281 Part10, AnnexA and acc. to ULstd.1581 Tab.50227 80 °C Ⴠ Sheath colour grey (RAL7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ Low-adhesion Ⴠ High flexibility at low temperatures Ⴠ High abrasion resistance Ⴠ Tear and cut-resistant Ⴠ Notch resistant Ⴠ Resistant to UV-radiation, Oxygen, Ozone, Hydrolysis, Oil Ⴠ Partially resistant to Microbial attack, Hydraulic fluid, Coolant emulsion, Alkalis Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Application Especially suited for drag chain installation in dry, moist and wet environments and outdoors with flexible movement and without tensile stress or forced movements. A highly-flexible PVC control cable suitable for frequent and fast lifting and bending stresses in machines and tool building, robot systems and on constantly moving machine components. Long service lives guarantee reliable function and good cost efficiency. The dense screening assures interference-free transmission of all signals and impulses. An ideal interference-free control cable for the above applications. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. EMC = Electromagnetic compatibility To optimise the EMC characteristics we recommend a large area of contact of the copper braiding around the entire circumference on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 49797 2x0,14 49798 3x0,14 49799 4x0,14 49800 5x0,14 49801 7x0,14 49802 10x0,14 49803 12x0,14 49804 14x0,14 49805 18x0,14 49806 24x0,14 49807 25x0,14 49808 2x0,25 49809 3x0,25 49810 4x0,25 49811 5x0,25 49812 7x0,25 49813 10x0,25 49814 12x0,25  AWG-No. 26 26 26 26 26 26 26 26 26 26 26 24 24 24 24 24 24 24 Outer Ø Cop. approx. mm weight kg/km 4,4 11,2 4,5 14,1 4,8 15,5 5,0 18,3 5,8 27,8 6,7 39,3 6,8 42,1 7,1 45,3 7,8 54,1 8,8 66,3 9,2 68,4 4,8 14,9 5,0 18,8 5,3 21,3 5,7 31,0 6,6 39,6 7,5 53,9 7,7 59,1 Weight approx. kg/km 32,0 35,0 40,0 45,0 66,0 86,0 94,0 102,0 118,0 149,0 156,0 38,0 44,0 51,0 68,0 82,0 110,0 124,0  Dimensions and specifications may be changed without prior notice. (RN05) N 103  Part no. No.cores x cross-sec. mm² 49815 14x0,25 49816 18x0,25 49817 24x0,25 49818 25x0,25 49819 2x0,34 49820 3x0,34 49821 4x0,34 49822 5x0,34 49823 7x0,34 49824 10x0,34 49825 12x0,34 49826 14x0,34 49827 18x0,34 49828 24x0,34 49829 25x0,34 AWG-No. 24 24 24 24 22 22 22 22 22 22 22 22 22 22 22 Outer Ø Cop. approx. mm weight kg/km 8,0 64,2 8,8 78,4 10,2 89,9 10,7 101,0 5,1 18,1 5,3 28,7 5,7 35,7 6,1 39,1 7,1 52,7 8,1 67,4 8,3 76,4 8,7 85,5 9,8 99,7 11,3 147,1 11,8 155,0 Weight approx. kg/km 135,0 150,0 194,0 204,0 45,0 60,0 76,0 82,0 110,0 148,0 166,0 185,0 216,0 291,0 305,0 SUPER-PAAR-TRONIC 340-C-PUR cable for drag chains, halogen-free, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special drag chain cable, stranded in pairs Ⴠ Temperature range flexing -20 °C to +80 °C fixed -40 °C to +80 °C Ⴠ Nominal voltage 300V Ⴠ Test voltage core/core 1500 V core/screen 1000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Mutual capacitance core/core approx. 60 nF/km Ⴠ Minimum bending radius for permanent bending at 0,25 mm² flexing 7,5x cable ø fixed 4x cable ø at 0,5-1,0 mm² flexing 10x cable ø fixed 5x cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Bare copper conductor, fine or extra finewire to DINVDE0295 cl.6, col.4, BS6360 cl.6 and IEC 60228 cl. 6 Ⴠ Polyolefin core insulation Ⴠ Colour coded to DIN47100 Ⴠ Cores stranded in pairs, pairs stranded torsion-free in layers with optimal lay-length Ⴠ Core wrapping between the layers of stranding Ⴠ Braided screen of tinned Cu wires, coverage approx. 85% Ⴠ Core wrapping with fleece Ⴠ Full polyurethane outer sheath TMPU acc. to DINVDE0281 Part10, AnnexA and acc. to ULstd.1581 Tab.50227 80 °C Ⴠ Sheath colour grey (RAL7001) Ⴠ with meter marking, change-over in 2011 Ⴠ Flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ Oil resistance according to IEC 60092-350 Ⴠ Halogen free Ⴠ Weather, ozone and UV-resistant Ⴠ Chemical resistance to solvents, acids, alkalis and hydraulic fluids Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Advantages Ⴠ Very high resistance to mechanical stresses Ⴠ Very good alternating bending strength Ⴠ High tear, abrasion and impact resistance, even at low temperatures  Application Stranded in pairs, these fully-screened special drag chain cables can also be used where external, high-frequency interference influences pulse transfer. They are used for permanently flexible stresses in machine and tool building, in robot technology, on constantly moving machine components and for extended use in multi-shift operations. Developed to state-of-the-art technology, these highly-flexible data cable, with a cut resistant and low-adhesion PUR outer sheath guaranteeing optimal service life and extremely good cost efficiency. This two-approvals single-core cable is preferred for use in export-oriented mechanical engineering, in machine tools, production lines and systems engineering. Guaranteed extended use in multi-shift operations with extremely high bending stresses. EMC = Electromagnetic compatibility To optimise the EMC characteristics we recommend a large area of contact of the copper braiding around the entire circumference on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.pairs x no.cores x cross-sec. mm² 49830 1x2x0,25 49831 2x2x0,25 49832 3x2x0,25 49833 4x2x0,25 49834 5x2x0,25 49835 6x2x0,25 49836 8x2x0,25 49837 10x2x0,25 49838 14x2x0,25 49839 1x2x0,34 49840 2x2x0,34 49841 3x2x0,34 49842 4x2x0,34 49843 5x2x0,34 49844 6x2x0,34 49845 8x2x0,34 49846 10x2x0,34 49847 14x2x0,34 49848 1x2x0,5 49849 2x2x0,5 49850 3x2x0,5 49851 4x2x0,5 49852 5x2x0,5  AWG-No. 24 24 24 24 24 24 24 24 24 22 22 22 22 22 22 22 22 22 20 20 20 20 20 Outer Ø Cop. approx. mm weight kg/km 4,8 6,7 7,1 7,6 8,3 9,0 10,5 11,9 12,7 5,1 7,2 7,6 8,3 9,0 9,9 11,9 13,9 14,1 5,8 8,4 9,0 10,0 11,0 14,0 32,0 38,4 43,2 51,5 71,8 74,4 90,0 111,2 20,0 41,0 52,2 59,1 67,0 86,4 107,5 131,0 150,0 22,5 53,0 72,8 75,6 85,7 Weight approx. kg/km 26,0 61,0 70,0 82,0 99,0 126,0 147,0 179,0 210,0 35,0 80,0 100,0 118,0 134,0 162,0 214,0 270,0 304,0 47,0 100,0 131,0 149,0 169,0  Part no. No.pairs x no.cores x cross-sec. mm² 49853 6x2x0,5 49854 8x2x0,5 49855 10x2x0,5 49856 14x2x0,5 49857 1x2x0,75 49858 2x2x0,75 49859 3x2x0,75 49860 4x2x0,75 49861 5x2x0,75 49862 6x2x0,75 49863 8x2x0,75 49864 10x2x0,75 49865 14x2x0,75 49866 1x2x1 49867 2x2x1 49868 3x2x1 49869 4x2x1 49870 5x2x1 AWG-No. 20 20 20 20 19 19 19 19 19 19 19 19 19 18 18 18 18 18 Outer Ø Cop. approx. mm weight kg/km 11,8 14,2 16,5 16,9 6,2 9,2 9,8 11,2 12,2 13,2 15,6 18,4 18,9 6,7 10,0 10,8 11,7 13,2 103,0 148,4 180,0 218,3 35,2 61,4 87,1 95,2 115,0 137,1 184,4 259,8 318,4 42,0 73,0 93,6 117,8 139,0 Weight approx. kg/km 181,0 274,0 332,0 390,0 56,0 102,0 144,0 160,0 193,0 216,0 327,0 451,0 521,0 64,0 120,0 160,0 184,0 217,0  Dimensions and specifications may be changed without prior notice. (RN05) N 104 N MULTISPEED®-TRONIC-PUR safety against high bending in drag chain systems, halogen-free, meter marking   Technical data Cable structure Properties Ⴠ Special drag chain cables for high mechanical stress in adapted to DINVDE0281 part13, DINVDE0282 part10 and EDINVDE0245 and UL-Std.758AWM Style20233 and 20939. Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -50 °C to +80 °C Ⴠ Nominal voltage U0/U 300/300 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Bare copper, fine wire conductors, Unilay with short pitch length Ⴠ Special TPE core insulation Ⴠ Colour coded to DIN 47100 Ⴠ Stranding: <7 cores: cores stranded in a layer with optimal lay-length around a filler as per construction ุ7 cores: cores stranded with optimal lay-length to bunch-construction with low torsion strength, optimal selected short lay-length around a filler Ⴠ Special-PUR outer sheath, especially resistant against fatigue strength, extruded as filler with pressure, sheath Ⴠ Colourblack (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ PUR flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB), VW-1, FT1 Ⴠ Low-adhesion Ⴠ Halogen-free Ⴠ High property of alternating bending strength Ⴠ High tensile strength, abrasion- and impact resistance at low temperature Ⴠ Use in multi-shift operations under extremely high continuous bending loads Ⴠ Abrasion resistance Ⴠ Tear resistance Ⴠ High stability Ⴠ Oil resistance Ⴠ Better chemical resistance Ⴠ UV and ozone resistance Ⴠ Higher economical solution Ⴠ Reduced diameter, therefore lower moving masses Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ screened analogue type: MULTISPEED® TRONIC-C-PUR, see page N 106  Application Application HELUKABEL® MULTISPEED-TRONIC-PUR installed there, where the extreme requirements for the cables are necessary. The selected materials and lay-up technique permit these high flexible cables for permanent application in drag chains for long distances, high and low speed of movements. These cables are installed in dry, moist and wet rooms and in open air with free movement without tensile stress or forced movements. These robust and abrasion resistant special control cables are installed there, where the problems appear for the application in permanent stresses e.g. in energy drag chains, industry robotics, production lines, automatic control systems and permanent movable machinery parts for multi-shift operation. These cables are installed everywhere, where high requirements for the flexibility, abrasion, oxygen and chemical resistance are necessary. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 24567 24568 24569 24570 24571 24572 24573 24574  No.cores x cross-sec. mm² 2x0,25 3x0,25 4x0,25 5x0,25 7x0,25 12x0,25 18x0,25 25x0,25 AWG-No. Outer Ø approx. mm 24 3,9 24 4,1 24 4,4 24 4,7 24 6,9 24 7,4 24 8,9 24 10,2 Cop. weight kg/km 5,0 7,5 10,0 12,5 17,5 30,1 45,0 62,5 Weight approx. kg/km 27,0 33,0 40,0 48,0 60,0 91,0 125,0 170,0  Dimensions and specifications may be changed without prior notice. (RN05) N 105  Part no. 24575 24576 24577 24578 24579 24580 24581 24582 No.cores x cross-sec. mm² 2x0,34 3x0,34 4x0,34 5x0,34 7x0,34 12x0,34 18x0,34 25x0,34 AWG-No. Outer Ø approx. mm 22 4,1 22 4,3 22 4,6 22 5,0 22 7,3 22 7,9 22 9,7 22 10,0 Cop. weight kg/km 6,8 10,2 13,6 17,0 23,8 40,8 61,2 85,0 Weight approx. kg/km 32,0 40,0 55,0 60,0 80,0 127,0 175,0 238,0 MULTISPEED®-TRONIC-C-PUR safety against high bending in drag chain systems, high flexible, halogen-free, screened, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special drag chain cables for high mechanical stress in adapted to DINVDE0281 part13, DINVDE0282 part10 and EDINVDE0245 and UL-Std.758 AWM Style20233 and 20939. Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -50 °C to +80 °C Ⴠ Nominal voltage U0/U 300/300 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Radiation resistance up to 100x106 cJ/kg (up to 100 Mrad) Ⴠ Bare copper, fine wire conductors, Unilay with short pitch length Ⴠ Special TPE core insulation Ⴠ Colour coded to DIN 47100 Ⴠ Stranding: <7 cores: cores stranded in a layer with optimal lay-length around a filler as per construction ุ7 cores: cores stranded with optimal lay-length to bunch-construction with low torsion strength, optimal selected short lay-length around a filler Ⴠ Special-TPE inner sheath, extruded as filler with pressure, grey (RAL7001) Ⴠ Screen of Cu braid bare, coverage 85% max., with optimal pitch Ⴠ Special-PUR outer sheath Ⴠ Sheath colour black (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) VW-1, FT1 Ⴠ Low-Adhesion Ⴠ Halogen-free Ⴠ High property of alternating bending strength Ⴠ High tensile strength, abrasion- and impact resistance at low temperature Ⴠ Use in multi-shift operations under extremely high continuous bending loads Ⴠ Abrasion resistance Ⴠ Tear resistance Ⴠ High stability Ⴠ Oil resistance Ⴠ Better chemical resistance Ⴠ UV and ozone resistance Ⴠ Higher economical solution Ⴠ Reduced ø, results low weight of moving materials Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note N Ⴠ non screened analogue type: MULTISPEED® TRONIC-PUR, see page N 105  Application For permanent application in drag chains for long distances, high and low speed of movements. These cables are installed in dry, moist and wet rooms and in open air with free movement without tensile stress or forced movements. These robust and abrasion resistant special control cables are installed there, where the problems appear for the application in permanent stresses. These cables are installed everywhere, where high requirements for the flexibility, abrasion, oxygen and chemical resistance are necessary. These screened cables are particularly suitable for the interference-free transmission in instrumentation and control engineering applications. For applications which go beyond standard solutions we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 24614 24615 24616 24617 24618 24619 24620 24621  No.cores x cross-sec. mm² 2x0,25 3x0,25 4x0,25 5x0,25 7x0,25 12x0,25 18x0,25 25x0,25 AWG-No. Outer Ø approx. mm 24 5,4 24 5,6 24 5,9 24 6,2 24 8,7 24 9,4 24 11,5 24 13,0 Cop. weight kg/km 74,0 19,0 22,0 26,0 35,0 58,0 79,0 99,0 Weight approx. kg/km 39,0 45,0 51,0 68,0 83,0 122,0 160,0 210,0  Part no. 24622 24623 24624 24625 24626 24627 24628 24629 No.cores x cross-sec. mm² 2x0,34 3x0,34 4x0,34 5x0,34 7x0,34 12x0,34 18x0,34 25x0,34 AWG-No. Outer Ø approx. mm 22 5,6 22 5,8 22 6,1 22 6,8 22 9,3 22 9,9 22 12,3 22 13,6 Cop. weight kg/km 18,0 22,0 28,0 31,0 51,0 70,0 103,0 130,0 Weight approx. kg/km 45,0 60,0 76,0 82,0 110,0 166,0 216,0 312,0  Dimensions and specifications may be changed without prior notice. (RN05) N 106 UL-Style 1007, CSA TR 65 UL-Style 1569, CSA TR 64 UL-Style 1015 DREINORM FÜNFNORM THHN/THWN PVC-Single Cores HELUTHERM® 145 UL-Style 3135 Single 600-J/-O Single 600-CY -J/-O Single 602-RC* -J/O Single 602-RC*-CY -J/O MULTISPEED® 600-PUR -J/-O MULTISPEED® 600-C-PUR -J/-O Photo: HELUKABEL® UL/CSA Single Conductors N 107 UL-Style 1007, CSA TR 64 PVC single cores, 80°C, 300V   Technical data Cable structure Ⴠ PVC-single core toUL-Style and CSA-AWM Ⴠ UL-Style 1007 Ⴠ CSA-AWM I A/B or TR 64 Ⴠ Temperature range flexible -5 °C bis +80 °C fixed installation -30 °C bis +80 °C CSA-AWM I A/B or TR 64 +90 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage 2000 V Ⴠ Test voltage (Spark test) AWG 26-20 = 4 kV AWG 10-18 = 5 kV Ⴠ Bending radius once approx. 5x core ø multiple approx. 10x core ø Ⴠ Stranded copper conductor, tinned to UL-Std.785 sectionG Ⴠ PVC-core insulation according to UL-Std.1581 class43 Tab.50.182, heat and damp resistant  Properties Ⴠ Conditionally resistant to Oils Solvents Acids Lyes Ⴠ PVC self-extinguishing and flame retardant, test method to UL VW-1/CSA FT1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ Please complete the above part number for the colour required, using the following table: 00 = green 01 = black 02 = blue 03 = brown 04 = red 05 = white 06 = grey 07 = violet 08 = yellow 09 = orange 10 = transparent 11 = pink 12 = beige 13 = green-yellow Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ Due to design the constructional alternations may the possible.  Application For the internal wiring of switchbords, electrical equipment, e. g. households, radio or televisions and control desks. Connecting wires in machines laid in protective tubes and flexible pipes and also for motors and transformators. AWM = Appliance Wiring Material For internal wirings for electrical equipment and control apparatus e.g. electronic assembly components. UL = Underwriters Laboratories Inc. (USA) CSA = Canadian Standards Association (Canada) = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 635xx 620xx 621xx 622xx 623xx  No.cores x cross-sec. mm² 1x0,13 1x0,21 1x0,33 1x0,52 1x0,82 AWG-No. Outer Ø approx. mm 26 1,4 24 1,5 22 1,6 20 1,8 18 2,1 Cop. weight kg/km 1,6 2,3 3,4 5,3 8,2 Weight approx. kg/km 3,2 4,3 6,0 8,5 12,5  Part no. 624xx 636xx 637xx 638xx No.cores x cross-sec. mm² 1x1,32 1x2,08 1x3,31 1x5,26 AWG-No. Outer Ø approx. mm 16 2,4 14 3,0 12 3,9 10 4,1 Cop. weight kg/km 13,0 20,0 33,0 51,6 Weight approx. kg/km 18,5 29,0 40,0 61,0  Dimensions and specifications may be changed without prior notice. (RN06) N 108 N UL-Style 1569, CSA TR 64 PVC single cores, 105°C, 300V   Technical data Cable structure Ⴠ PVC-single core to UL-Style and CSA-AWM UL-Style 1569 CSA-AWM I A/B or TR 64 Ⴠ Temperature range flexible -5 °C bis +105 °C fixed installation -30 °C bis +105 °C CSA-AWM I A/B or TR 64 +90 °C Ⴠ Nominal voltage 300 V Ⴠ Test voltage 2000 V Ⴠ Test voltage (Spark test) AWG 26-20 = 4 kV AWG 10-18 = 5 kV Ⴠ Bending radius once approx. 5x core ø multiple approx. 10x core ø Ⴠ Stranded copper conductor, tinned to UL-Std.785 Ⴠ PVC-core insulation according to UL-Std.1581 class43 Tab.50.182, heat and damp resistant Properties Ⴠ Conditionally resistant to Oils Solvents Acids Lyes Ⴠ PVC self-extinguishing and flame retardant, test method to UL VW-1/CSA FT1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ Please complete the above part number for the colour required, using the following table: 00 = green 01 = black 02 = blue 03 = brown 04 = red 05 = white 06 = grey 07 = violet 08 = yellow 09 = orange 10 = transparent 11 = pink 12 = beige 13 = green-yellow Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ Due to design the constructional alternations may the possible.  Application For the internal wiring of switchbords, electrical equipment, e. g. households, radio or televisions and control desks. Connecting wires in machines laid in protective tubes and flexible pipes and also for motors and transformators. AWM = Appliance Wiring Material For internal wirings for electrical equipment and control apparatus e.g. electronic assembly components. UL = Underwriters Laboratories Inc. (USA) CSA = Canadian Standards Association (Canada) = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 660xx 661xx 662xx 663xx 664xx  No.cores x cross-sec. mm² 1x0,13 1x0,21 1x0,33 1x0,52 1x0,82 AWG-No. Outer Ø approx. mm 26 1,4 24 1,5 22 1,6 20 1,8 18 2,1 Cop. weight kg/km 1,6 2,3 3,4 5,3 8,2 Weight approx. kg/km 3,2 4,3 6,0 8,5 12,5  Dimensions and specifications may be changed without prior notice. (RN06) N 109  Part no. 665xx 666xx 667xx 668xx No.cores x cross-sec. mm² 1x1,32 1x2,08 1x3,31 1x5,26 AWG-No. Outer Ø approx. mm 16 2,4 14 2,9 12 3,6 10 4,3 Cop. weight kg/km 13,0 20,0 33,0 51,6 Weight approx. kg/km 18,5 29,0 40,0 61,0 UL-Style 1015 PVC single core, 600V   Technical data Cable structure Ⴠ PVC-single core as per ULAWM Style1015/MTW and CSA-AWM/TEW as per UL-Style1015 and CSA-TEW Ⴠ Temperature range flexible -5 °C to +105 °C fixed installation -30 °C to +105 °C Ⴠ Temperature at conductor max. UL and CSA: +105 °C Ⴠ Nominal voltage 600 V Ⴠ Test voltage (Spark test) AWG 24: 4 kV AWG 22 and 20: 5 kV AWG 18 to 10: 6 kV AWG 8: 7,5 kV Ⴠ UL-type AWM + MTW 105 °C 600 V Ⴠ CSA-type AWM + TEW 105 °C 600 V Ⴠ Bending radius once approx. 5x core ø multiple approx. 10x core ø Ⴠ Stranded copper conductor,tinned or plain AWG-sizes as per table below Ⴠ PVC-core insulation according to UL-Standard 1581, class 43 and CSA-C22.2 No. 210 UL VW-1 and CSA FT1, heat and damp resistant Ⴠ For structural reasons, constructive changes are possible Properties Ⴠ Conditionally resistant to Oils Solvents Acids Lyes Ⴠ PVC self-extinguishing and flame retardant, test method to UL VW-1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ Please complete the above part number for the colour required, using the following table: 00 = green / 01 = black / 02 = blue / 03 = brown / 04 = red / 05 = white / 06 = grey / 07 = violet / 08 = yellow / 09 = orange / 10 = transparent / 11 = pink / 12 = beige / 13 = green-yellow / 14 = blue/white / 15 = dark blue/white 27 = white/blue (supply up to AWG 8)  Application For the internal wiring of switchbords, electrical equipment, e. g. households, radio or televisions and control desks. Connecting wires in machines laid in predective tubes and flexible pipes and also for motors and transformators. UL bzw. CSA: AWM = Appliance Wiring Material For internal wirings for electrical equipment and control apparatus e. g. electronic assembly components. UL-MTW: Machine Tool-Wires CSA-TEW: Equipment/Lead Wires MTW = Machine Tool Wire For the electronical installation of machine tools and the relative control UL = Underwriters Laboratories Inc. (USA) CSA = Canadian Standards Association (Kanada) = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 601xx 602xx 603xx 604xx 605xx 606xx 607xx 608xx 609xx 610xx 611xx 612xx  No.cores x cross-sec. mm² 1x0,21 1x0,33 1x0,52 1x0,81 1x1,31 1x2,08 1x3,32 1x5,26 1x8,35 1x13,29 1x21,14 1x26,65 AWG-No. Outer Ø approx. mm 24 2,2 22 2,4 20 2,5 18 2,8 16 3,1 14 3,5 12 4,0 10 4,6 8 6,5 6 8,0 4 9,5 3 10,4 Cop. weight kg/km 2,3 3,2 5,0 7,9 12,6 20,7 33,0 51,6 80,6 125,0 201,0 253,0 Weight approx. kg/km 8,0 10,0 12,0 16,0 22,0 31,0 45,0 65,0 110,0 175,0 260,0 340,0  Part no. 613xx 614xx 615xx 616xx 617xx 618xx 62501 62601 62701 62801 62901 No.cores x cross-sec. mm² 1x33,61 1x42,38 1x53,47 1x67,4 1x84,97 1x107,17 1x127 1x152 1x178 1x203 1x254 AWG-No. Outer Ø approx. mm 2 11,3 1 13,3 1/0 13,6 2/0 15,5 3/0 17,5 4/0 19,0 250 kcmil 21,2 300 kcmil 22,4 350 kcmil 25,3 400 kcmil 26,0 500 kcmil 28,0 Cop. weight kg/km 317,0 399,0 500,0 631,0 792,0 996,0 1178,0 1410,0 1645,0 1902,0 2345,0 Weight approx. kg/km 380,0 500,0 615,0 750,0 900,0 1070,0 1280,0 1518,0 1756,0 2002,0 2475,0  Dimensions and specifications may be changed without prior notice. (RN06) N 110 N THREENORM PVC single core, UL-Style 1013 and CSA 600V   Technical data Cable structure Properties Ⴠ PVC-single cores according to DINVDE0281 part3 and HD21.3S3 UL-Style1013 and CSA,CSA-AWMI/A/B Ⴠ Temperature range H05 V-K/H07 V-K flexing +5 °C to +70 °C fixed installation -10 °C to +70 °C UL/CSA +90 °C Ⴠ Nominal voltage H05 V-K U0/U 300/500 V (ื1 mm²) H07 V-K U0/U 450/750 V (1,5 mm²) UL/CSA 600 V AC Ⴠ Test voltage H05 V-K/H07 V-K 2000 V Ⴠ Spark Test AWG 20: 5 kV >AWG 20: 6 kV Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius for permanent bending ca. 10-15 core ø Ⴠ Bare copper fine wire stranded to DINVDE0295 cl.5, BS6360 cl.5, HD383 and IEC60228 cl.5 Ⴠ UL-Subject758 SectionG resp.ASTMB174 Ⴠ PVC core insulation TI1 to DINVDE0281 part1 and UL-Std.1581, class43, CSA-C22.2 No.210 Tab.12 classH Ⴠ Core colours to DINVDE0293 Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) UL-VW-1 CSA FT1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ Tinned conductor on request. Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ The cross-sections 0,5mm², 0,75mm² and 1,0mm² are according to H05V-K, the cross-sections 1,5up to 120mm² according to H07V-K.  Application Three norms approved connecting jumper wire primarily designed for exportes, used in machine tools. This wire is used for internal wiring of switchboards and electrical equipment. The approbation of HAR-UL-CSA AWM make possible an economical storekeeping and simplification of parts list. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.  H05 V-K/mm² Cross-sec. mm² / AWG-no. approx. RAL Part no. 0,5 / 20 Part no. 0,75 / 19 Part no. 1 / 18 Outer Ø approx. mm 2,5 2,65 2,8 Cop. black weight kg/km 9005 63815 4,8 63831 7,2 63847 9,6 blue brown red white grey vio pink og green ye gn-ye 2-col. dk-bu trans o.col. 5015 63817 8003 63818 3000 63819 1013 63820 7000 63821 4005 63822 3015 63824 2003 63828 6018 63825 1021 63823 63816 63830 5010 63827 63826 63829 63833 63834 63835 63836 63837 63838 63840 63844 63841 63839 63832 63846 63843 63842 63845 63849 63850 63851 63852 63853 63854 63856 63860 63857 63855 63848 63862 63859 63858 63861  Continuation Ⴇ N 111 THREENORM PVC single core, UL-Style 1013 and CSA 600V H07 V-K/mm² Cross-sec. mm² / AWG-no. approx. RAL Part no. 1,5 / 16 Part no. 2,5 / 14 Part no. 4 / 12 Part no. 6 / 10 Part no. 10 / 8 Part no. 16 / 6 Part no. 25 / 4 Part no. 35 / 2 Part no. 50 / 1 Part no. 70 / 2/0 Part no. 95 / 3/0 Part no. 120 / 4/0 Part no. 150 / 300 kcmil Outer Ø approx. mm 3,05 3,6 4,1 4,8 6,4 8,1 9,6 10,8 13,6 15,2 16,8 19,5 22,2 Cop. black weight kg/km 9005 63863 14,4 63879 24,0 63895 38,0 63911 58,0 63927 96,0 63943 154,0 63959 240,0 63975 336,0 63991 480,0 64007 672,0 64023 912,0 64039 1152,0 64055 1440,0 blue brown red white grey vio pink og green ye gn-ye 2-col. dk-bu trans o.col. 5015 63865 8003 63866 3000 63867 1013 63868 7000 63869 4005 63870 3015 63872 2003 63876 6018 63873 1021 63871 63864 63878 5010 63875 63874 63877 63881 63882 63883 63884 63885 63886 63888 63892 63889 63887 63880 63894 63891 63890 63893 63897 63898 63899 63900 63901 63902 63904 63908 63905 63903 63896 63910 63907 63906 63909 63913 63914 63915 63916 63917 63918 63920 63924 63921 63919 63912 63926 63923 63922 63925 63929 63930 63931 63932 63933 63934 63936 63940 63937 63935 63928 63942 63939 63938 63941 63945 63946 63947 63948 63949 63950 63952 63956 63953 63951 63944 63958 63955 63954 63957 63961 63962 63963 63964 63965 63966 63968 63972 63969 63967 63960 63974 63971 63970 63973 63977 63978 63979 63980 63981 63982 63984 63988 63985 63983 63976 63990 63987 63986 63989 63993 63994 63995 63996 63997 63998 64000 64004 64001 63999 63992 64006 64003 64002 64005 64009 64010 64011 64012 64013 64014 64016 64020 64017 64015 64008 64022 64019 64018 64021 64025 64026 64027 64028 64029 64030 64032 64036 64033 64031 64024 64038 64035 64034 64037 64041 64042 64043 64044 64045 64046 64048 64052 64049 64047 64040 64054 64051 64050 64053 64057 64058 64059 64060 64061 64062 64064 64068 64065 64063 64056 64070 64067 64066 64069  Dimensions and specifications may be changed without prior notice. (RN06) N Photo: HOMAG Holzbearbeitungssysteme AG N 112 FIVENORM HAR-UL-CSA-AWM-MTW, PVC single core, UL-Style 10269/UL-Standard 1063, 600V, 105°C   Technical data Cable structure Properties Ⴠ PVC-single cores according to DINVDE0281 part7 and HD21.7S2, UL-Std.1063, UL-Style10269 and CSA-TEW and CSA-AWMI/A/B Ⴠ Temperature range H05 V2-K/H07 V2-K flexing +5 °C to +90 °C fixed installation -40 °C to +90 °C UL (AWM) -40 °C to +105 °C UL (MTW) -40 °C to +90 °C CSA (TEW) -40 °C to +105 °C Ⴠ Nominal voltage H05 V2-K: U0/U 300/500 V (up to 1mm²) H07 V2-K: U0/U 450/750 V (1,5 mm²) UL (AWM) U 1000 V UL (MTW)U 600 V CSA (TEW) U 600 V Test voltage H05 V2-K/H07 V2-K 2000 V Ⴠ Spark Test AWG 20: 5 kV >AWG 20: 6 kV Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius for permanent bending ca. 10-15 core ø Ⴠ Bare copper fine wire stranded to DINVDE0295 cl.5, BS6360 cl.5, HD383 and IEC60228 cl.5 and UL-Subject758 SectionG Ⴠ PVC core insulation TI3 to DINVDE0281 part1 and UL-Std.1581, class43, CSA-C22.2 No.210 Tab.12 classH Ⴠ Core colours to DINVDE0293 Ⴠ 2-colour combination - Part No. on request  Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB),UL VW-1,CSA FT1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ Tinned conductor on request. Ⴠ The cross-sections 0,5mm², 0,75mm² and 1,0mm² are according to H05V2-K, the cross-sections 1,5up to 35mm² according to H07V2-K, the cross-sections >35mm² are identified as H07 V-K. Ⴠ Cross-sections up to 35mm² is according to DINVDE0281 part7. Due to this cross-section >35mm² is the type but with an increased heat-resistant PVC-compound. Ⴠ Type H05 V: approved one-colour mark: black, blue, brown, grey, orange, pink, red, turquoise, violet, white, green and yellow. Two-coloured mark in any combination of the above individual colours. Ⴠ Type H07 V: approved mark: black, blue, brown, grey, orange, pink, red, turquoise, violet, white and green-yellow. Other marks are available as (H).  Application Five norms approved connecting jumper wire primarily designed for exportes, used in machine tools. The approbation of HAR, UL-AWM, UL-MTW, CSA-AWM, CSA-Equipment-wire make possible an economical storekeeping and simplification of parts list. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.  H05 V2-K/mm² Cross-sec. mm² / AWG-no. approx. RAL Part no. 0,5 / 20 Part no. 0,75 / 19 Part no. 1 / 18 Outer Ø approx. mm 2,5 2,65 2,8 Cop. black weight kg/km 9005 64075 5,2 64091 7,2 64107 9,6 blue brown red white grey vio pink og green ye gn-ye 2-col. dk-bu trans o.col. 5015 64077 8003 64078 3000 64079 1013 64080 7000 64081 4005 64082 3015 64084 2003 64088 6018 64085 1021 64083 64076 64090 5010 64087 64086 64089 64093 64094 64095 64096 64097 64098 64100 64104 64101 64099 64092 64106 64103 64102 64105 64109 64110 64111 64112 64113 64114 64116 64120 64117 64115 64108 64122 64119 64118 64121  Continuation Ⴇ N 113 FIVENORM HAR-UL-CSA-AWM-MTW, PVC single core, UL-Style 10269/UL-Standard 1063, 600V, 105°C H07 V2-K/mm² Cross-sec. mm² / AWG-no. approx. RAL Part no. 1,5 / 16 Part no. 2,5 / 14 Part no. 4 / 12 Part no. 6 / 10 Part no. 10 / 8 Part no. 16 / 6 Part no. 25 / 4 Part no. 35 / 2 Part no. 50 / 1 Part no. 70 / 2/0 Part no. 95 / 3/0 Part no. 120 / 4/0 Part no. 150 / 300 kcmil Outer Ø approx. mm 3,05 3,6 4,1 4,8 6,4 8,1 9,6 10,8 13,6 15,2 16,8 19,5 22,2 Cop. black weight kg/km 9005 64123 14,4 64139 24,0 64155 38,0 64171 58,0 64187 96,0 64203 154,0 64219 240,0 64235 336,0 64251 480,0 64267 672,0 64283 912,0 64299 1152,0 64315 1440,0 blue brown red white grey vio pink og green ye gn-ye 2-col. dk-bu trans o.col. 5015 64125 8003 64126 3000 64127 1013 64128 7000 64129 4005 64130 3015 64132 2003 64136 6018 64133 1021 64131 64124 64138 5010 64135 64134 64137 64141 64142 64143 64144 64145 64146 64148 64152 64149 64147 64140 64154 64151 64150 64153 64157 64158 64159 64160 64161 64162 64164 64168 64165 64163 64156 64170 64167 64166 64169 64173 64174 64175 64176 64177 64178 64180 64184 64181 64179 64172 64186 64183 64182 64185 64189 64190 64191 64192 64193 64194 64196 64200 64197 64195 64188 64202 64199 64198 64201 64205 64206 64207 64208 64209 64210 64212 64216 64213 64211 64204 64218 64215 64214 64217 64221 64222 64223 64224 64225 64226 64228 64232 64229 64227 64220 64234 64231 64230 64233 64237 64238 64239 64240 64241 64242 64244 64248 64245 64243 64236 64250 64247 64246 64249 64253 64254 64255 64256 64257 64258 64260 64264 64261 64259 64252 64266 64263 64262 64265 64269 64270 64271 64272 64273 64274 64276 64280 64277 64275 64268 64282 64279 64278 64281 64285 64286 64287 64288 64289 64290 64292 64296 64293 64291 64284 64298 64295 64294 64297 64301 64302 64303 64304 64305 64306 64308 64312 64309 64307 64300 64314 64311 64310 64313 64317 64318 64319 64320 64321 64322 64324 64328 64325 64323 64316 64330 64327 64326 64329  Dimensions and specifications may be changed without prior notice. (RN06) N N 114 THHN/THWN 90°C, 600V, UL listed, PVC + nylon single core   Technical data Cable structure Properties Ⴠ PVC + Nylon insulated single cores as per UL-Styles und NEC standard Ⴠ Temperature range as per Styles THHN: 90 °C dry - NEC standard THWN: 75 °C wet - NEC standard AWM: UL-Styles 1316 to 1321 105 °C dry 80 °C in oil AWM: UL-Styles 1452, 1453 90 °C dry 80 °C in oil 1000 V MTW: UL-Styles 1408 to 1414 90 °C dry 80 °C in oil 600 V Ⴠ Nominal voltage 600 V Ⴠ Minimum bending radius 8x core ø Ⴠ Test voltage (Spark test) AWG 14 to AWG 10 = 7,5 kV AWG 8 to AWG 2/0 = 10 kV AWG 3/0 to AWG 4/0 = 12,5 kV kcmil 250 to kcmil 500 = 15 kV kcmil 600 to kcmil 1000 = 17,5 kV Ⴠ Bare copper conductor, AWG-sizes as per given table below and ASTM B-3 and ASTM B-8 Ⴠ Core insulation of PVC+Nylon-outer-sheath Ⴠ Cores colour coded, colour identification see below Ⴠ Surface of jacket printed with markings: 14 to 1000 MCM THHN (stranded) - (size) AWG Type MTW OR THHN OR THWN 600 V OR GASOLINE AND OIL RESTSTANT II (UL) OR AWM W-51554 14 to 10 AWG THHN (solid) - (size) AWG TYPE THHN OR THWN 600 V OR GASOLINE AND OIL RESISTANT II (UL) OR AWM Ⴠ Resistant against Oils Gasoline Water Acids Ozone Lyes Sunlight Abrasion  Note Ⴠ 1 kcmil = 1000 circ mils = 0,5067 mm². Ⴠ Please complete the above part number for the colour required, using the following code: 0 = green 1 = black 2 = blue 3 = brown 4 = red 5 = white 6 = grey 7 = yellow 8 = orange 9 = pink  Application As flexible connecting cable in machines, switch and distribution cabinets, cable assemblies and for fixed indoor installation, in tubes and in cable conduits. AWM = Appliance Wiring Material / For internal wrings for electrical equipment and control apparatus e.g. radio and televisions, electronic assembly component. MTW = Machine Tool Wire / For the electronical installation of machine tools and the relative control. THW = Thermoplastic PVC-insulated building wire, Heat resistant 75 °C, for Wet and dry locations, flame retardant. THHN = Thermoplastic PVC-insulated building wire, Nylon jacketed, 90 °C 600 V, for dry and damp locations. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 6320x 6321x 6322x 6323x 6324x 6325x 6326x 6327x 6328x 6329x 6330x 6331x 6332x Cross-sec. mm² AWG-No. 2,08 3,32 5,26 8,35 13,39 21,14 26,65 33,61 42,38 53,47 67,4 84,97 107,17 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0 AWG size Cond. make-up n x wire Ø Outer Ø approx. mm 0,0147 0,0185 0,0234 0,0295 0,0378 0,0469 0,053 0,0591 0,0664 0,0745 0,0837 0,094 0,1055 19 x 0,38 19 x 0,48 19 x 0,6 19 x 0,75 19 x 0,96 19 x 1,19 19 x 1,336 19 x 1,5 19 x 1,686 19 x 1,89 19 x 2,126 19 x 2,387 19 x 2,68 AWG size Cond. make-up n x wire Ø Outer Ø approx. mm 0,0822 0,09 0,0973 0,104 0,1162 0,0992 0,1109 0,128 37 x 2,088 37 x 2,286 37 x 2,47 37 x 2,7 37 x 2,95 61 x 2,52 61 x 2,82 61 x 3,25 18,29 19,56 21,08 22,35 24,13 26,75 29,36 33,27 3,0 3,4 4,3 5,5 6,6 8,4 9,1 10,0 11,4 12,4 13,7 15,0 16,5 Cop. weight kg/km 20,7 33,0 51,6 80,6 125,0 201,0 253,0 317,0 399,0 500,0 631,0 792,0 996,0 Weight approx. kg/km Cop. weight kg/km 1178,0 1410,0 1645,0 1902,0 2345,0 2920,0 3658,0 4858,0 Weight approx. kg/km 25,0 37,0 60,0 95,0 143,0 229,0 282,0 349,0 449,0 557,0 691,0 861,0 1069,0   Part no. 63331 63341 63351 63361 63371 63381 63391 63401 Cross-sec. mm² AWG-No. 127 152 178 203 254 304 380 507 250 kcmil 300 kcmil 350 kcmil 400 kcmil 500 kcmil 600 kcmil 750 kcmil 1000 kcmil  Dimensions and specifications may be changed without prior notice. (RN06) N 115 1277,0 1515,0 1753,0 1998,0 2466,0 3000,0 3713,0 4796,0 PVC single cores According to CEI-20-22 II   Technical data Cable structure Properties Ⴠ PVC-Single Cores as per Italian standard CEI20-22II Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -30 °C to +80 °C Ⴠ Nominal voltage U0/U 450/750 V = 1 mm² and above U0/U 300/500 V = 0,5 and 0,75 mm² U0/U 300/300 V = 0,35 mm² Ⴠ Test voltage 2500 V Ⴠ Minimum bending radius 4-6x core ø Ⴠ Bare fine wire stranded copper conductor to CEI20-29 cl.5 Ⴠ PVC-core insulation R2 up to CEI20II, cap.VI cl.3 Ⴠ Low smoke Ⴠ Resistant to Oil Solvents Acids Lyes Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm².  Application As hook up wire, control cabinet building, in cable assembly manufacturing as well as in electronic applications. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Cross-sec. mm² approx. RAL Part no. 0,35 Part no. 0,5 Part no. 0,75 Part no. 1 Part no. 1,5 Part no. 2,5 Part no. 4 Part no. 6 Part no. 10 Part no. 16 Part no. 25 Part no. 35 Part no. 50 Part no. 70 Part no. 95 Part no. 120 Part no. 150 Outer Ø approx. mm Cop. weight kg/km Weight black approx. kg/km 1,5 2,5 3,6 2,6 4,8 6,0 2,8 7,2 10,0 3,2 9,6 16,0 3,5 14,4 21,0 4,2 24,0 32,0 4,6 38,0 48,0 6,3 58,0 69,0 7,6 96,0 117,0 8,8 154,0 180,0 11,0 240,0 266,0 12,5 336,0 366,0 14,5 480,0 515,0 16,5 672,0 741,0 18,5 912,0 950,0 21,0 1152,0 1230,0 23,0 1440,0 1500,0 9005 29600 29608 20 29616 18 29624 17 29632 16 29640 14 29648 12 29656 10 29664 8 29672 6 29680 4 29688 2 29696 1 29704 2/0 29712 3/0 29720 4/0 29728 300 kcmil gn-ye blue brown red white dk-bu o.col. 29601 29609 20 29617 18 29625 17 29633 16 29641 14 29649 12 29657 10 29665 8 29673 6 29681 4 29689 2 29697 1 29705 2/0 29713 3/0 29721 4/0 29729 300 kcmil 5015 29602 29610 20 29618 18 29626 17 29634 16 29642 14 29650 12 29658 10 29666 8 29674 6 29682 4 29690 2 29698 1 29706 2/0 29714 3/0 29722 4/0 29730 300 kcmil 8003 29603 29611 20 29619 18 29627 17 29635 16 29643 14 29651 12 29659 10 29667 8 29675 6 29683 4 29691 2 29699 1 29707 2/0 29715 3/0 29723 4/0 29731 300 kcmil 3000 29604 29612 20 29620 18 29628 17 29636 16 29644 14 29652 12 29660 10 29668 8 29676 6 29684 4 29692 2 29700 1 29708 2/0 29716 3/0 29724 4/0 29732 300 kcmil 1013 29605 29613 20 29621 18 29629 17 29637 16 29645 14 29653 12 29661 10 29669 8 29677 6 29685 4 29693 2 29701 1 29709 2/0 29717 3/0 29725 4/0 29733 300 kcmil 5010 29606 29614 20 29622 18 29630 17 29638 16 29646 14 29654 12 29662 10 29670 8 29678 6 29686 4 29694 2 29702 1 29710 2/0 29718 3/0 29726 4/0 29734 300 kcmil 29607 29615 20 29623 18 29631 17 29639 16 29647 14 29655 12 29663 10 29671 8 29679 6 29687 4 29695 2 29703 1 29711 2/0 29719 3/0 29727 4/0 29735 300 kcmil  Dimensions and specifications may be changed without prior notice. (RN06) N 116 N HELUTHERM® 145 300V, flexible single core, cross-linked, halogen-free   Technical data Cable structure Properties Ⴠ Halogen-free single cores with increased heat resistance according to UL Style 3266 CSA CL 1252 Ⴠ Temperature range fixed flexing -35 °C to +120 °C fixed installation -55 °C to +125 °C in short circuit +280 °C Ⴠ Nominal voltage U0/U 300/300 V Ⴠ Test voltage 2000 V Ⴠ Minimum bending radius flexing approx. 12,5x core ø fixed installation approx. 4x core ø Ⴠ Caloric load values see Technical Informations Ⴠ Power ratings table see Technical Informations Ⴠ Tinned Cu wires, according to AWG-sizes Conductor make-up: AWG 24 to AWG 14 = 19-wires AWG 12 = 65-wires AWG 10 = 105-wires Ⴠ Core insulation of polyolefin-copolymer, cross-linked, flame retardant, halogen-free Ⴠ Core colours see table below Ⴠ Tests Flame test to VDE0482-332-3, BS4066 part3/ DINEN60332-3/ IEC60332-3 (equivalent DINVDE0472 part804 test methodC) Corrosiveness of combustion gases according to VDE0482 part267/ DINEN50267-2-2/ IEC60754-2 (equivalent DINVDE0472 part813) Halogen-free accordingto VDE0482 part267/ DINEN50267-2-1/ IEC60754-1 (equivalent DINVDE0472 part815) Smoke density to VDE 0482 part 1034-1+2/ IEC 61034-1+2 / DIN EN 61034-1+2 / BS 7622part 1+2 (equivalent DIN VDE 0472 part 816) Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Halogen-free Lower propagation of fire Low development of smoke and fumes Good abrasion and notch resistance Good resistance to oils and weathering Resistant to UV radiation and ozone Resistant to soldering temperatures Thermal class B These single-core cables are resistant to melting, even when in contact with a soldering iron at temperatures of between 300 °C and 380 °C, because of the electron-beam cross-linking for the insulation material Ⴠ Due to the high temperature profile the cross-section of conductor can under certain circumstances be reduced, hereby enabling a saving in space requirement and weight Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Note Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm².  Application These temperature resistant single-core cables are used for the internal wiring of lighting fixtures, heaters, electrical machinery, switching systems and distributors in equipment and plant and machinery, suitable for installation on, in and beneath plaster, in closed installation ducts, as well as for traffic systems and outdoor applications. These cables are not approved for direct routing on racks, gutters or tanks. For a protected installation, these cables may be used at a nominal voltage of up to 1000V alternating current or a direct current up to 750V when earthed. The maximum operating d.c. voltage used in rail vehicles shall not exceed 900V when earthed. These halogen-free single core cables are characterised by their amazingly hight long-time resistance to temperature and feature among the leading halogen-free. Flame resistant products in the world. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   AWG-No. Outer Ø Cop. Weight black approx. weight approx. mm kg/km kg/km approx. RAL 9005 Part no. 61817 24 1,5 2,3 4,0 Part no. 61831 22 1,6 3,2 6,0 Part no. 61845 20 1,9 5,0 9,0 Part no. 61859 18 2,1 7,9 12,0 Part no. 61873 16 2,4 12,6 16,0 Part no. 61887 14 2,9 20,7 27,0 Part no. 61901 12 3,3 33,0 36,0 Part no. 61915 10 4,1 51,6 58,0 brown red white grey vio green Beige pink lt-bu og ye gn-ye 2-col. 8003 61819 3000 61820 1013 61821 7000 61822 4005 61823 6018 61826 1001 61828 3015 61827 5015 61818 2003 61825 1021 61824 6018 61816 61829 61833 61834 61835 61836 61837 61840 61842 61841 61832 61839 61838 61830 61843 61847 61848 61849 61850 61851 61854 61856 61855 61846 61853 61852 61844 61857 61861 61862 61863 61864 61865 61868 61870 61869 61860 61867 61866 61858 61871 61875 61876 61877 61878 61879 61882 61884 61883 61874 61881 61880 61872 61885 61889 61890 61891 61892 61893 61896 61898 61897 61888 61895 61894 61886 61899 61903 61904 61905 61906 61907 61910 61912 61911 61902 61909 61908 61900 61913 61917 61918 61919 61920 61921 61924 61926 61925 61916 61923 61922 61914 61927  Dimensions and specifications may be changed without prior notice. (RN06) N 117 HELUTHERM® 145 600V, flexible single core, cross-linked, halogen-free   Technical data Cable structure Properties Ⴠ Halogen-free single cores with increased heat resistance according to UL Style 3271 CSA CL 1251 Ⴠ Temperature range flexing -35 °C to +120 °C fixed installation -55 °C to +125 °C in short circuit +280 °C Ⴠ Nominal voltage U 600 V Ⴠ Test voltage 3500 V Ⴠ Minimum bending radius flexing approx. 12,5x core ø fixed installation approx. 4x core ø Ⴠ Caloric load values see Technical Informations Ⴠ Power ratings table see Technical Informations Ⴠ Tinned Cu wires, according to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Core insulation of polyolefin-copolymer, cross-linked, flame retardant, halogen-free Ⴠ Core colours see table below Ⴠ Tests Flame test to VDE0482 Teil266-2, BS4066 part3/ DINEN50266-2/ IEC60332-3 (equivalent DINVDE0472 part804 test methodC) Corrosiveness of combustion gases according to VDE0482 part267/ DINEN50267-2-2/ IEC60754-2 (equivalent DINVDE0472 part813) Halogen-free accordingto VDE0482 part267/ DINEN50267-2-1/ IEC60754-1 (equivalent DINVDE0472 part815) Smoke density to VDE 0482 part 1034-1+2/ IEC 61034-1+2 / DIN EN 61034-1+2 / BS 7622 part 1+2 (equivalent DIN VDE 0472 part 816) Halogen-free Lower propagation of fire Low development of smoke and fumes Good abrasion and notch resistance Good resistance to oils and weathering Resistant to UV radiation and ozone Resistant to soldering temperatures Resistant to melting, even when in contact with a soldering iron at temperatures of between 300 °C and 380 °C, because of the cross-linking for the insulation material Ⴠ Due to the high temperature profile the cross-section of conductor can under certain circumstances be reduced, hereby enabling a saving in space requirement and weight Ⴠ The materials in manufacture are cadmium-free +contain no silicone +free from substances harmful to the wetting properties of lacquers Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ  Application These temperature resistant single-core cables are used for the internal wiring of lighting fixtures, heaters, electrical machinery, switching systems and distributors in equipment and plant and machinery, suitable for installation on, in and beneath plaster, in closed installation ducts, as well as for traffic systems and outdoor applications. These cables are not approved for direct routing on racks, gutters or tanks. For a protected installation, these cables may be used at a nominal voltage of up to 1000V alternating current or a direct current up to 750V when earthed. The maximum operating d.c. voltage used in rail vehicles shall not exceed 900V when earthed. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   CrossOuter Ø Cop. Weight black section approx. weight approx. mm² mm kg/km kg/km approx. RAL 9005 Part no. 59473 0,25 2,3 2,4 7,0 Part no. 59487 0,5 2,6 4,8 11,0 Part no. 59501 0,75 2,8 7,2 14,0 Part no. 59515 1 2,9 9,6 17,0 Part no. 59529 1,5 3,2 14,4 22,0 Part no. 59543 2,5 3,7 24,0 33,0 Part no. 59557 4 4,2 38,4 53,0 Part no. 59571 6 4,8 57,6 78,0 Part no. 59585 10 6,7 96,0 136,0 Part no. 59599 16 8,5 154,0 203,0 Part no. 59613 25 10,4 240,0 300,0 Part no. 59627 35 11,5 336,0 405,0 Part no. 59641 50 14,4 480,0 580,0 brown red white grey vio green Beige pink lt-bu og ye gn-ye 2-col. 8003 59475 3000 59476 1013 59477 7000 59478 4005 59479 6018 59482 1001 59484 3015 59483 5015 59474 2003 59481 1021 59480 6018 59472 59485 59489 59490 59491 59492 59493 59496 59498 59497 59488 59495 59494 59486 59499 59503 59504 59505 59506 59507 59510 59512 59511 59502 59509 59508 59500 59513 59517 59518 59519 59520 59521 59524 59526 59525 59516 59523 59522 59514 59527 59531 59532 59533 59534 59535 59538 59540 59539 59530 59537 59536 59528 59541 59545 59546 59547 59548 59549 59552 59554 59553 59544 59551 59550 59542 59555 59559 59560 59561 59562 59563 59566 59568 59567 59558 59565 59564 59556 59569 59573 59574 59575 59576 59577 59580 59582 59581 59572 59579 59578 59570 59583 59587 59588 59589 59590 59591 59594 59596 59595 59586 59593 59592 59584 59597 59601 59602 59603 59604 59605 59608 59610 59609 59600 59607 59606 59598 59611 59615 59616 59617 59618 59619 59622 59624 59623 59614 59621 59620 59612 59625 59629 59630 59631 59632 59633 59636 59638 59637 59628 59635 59634 59626 59639 59643 59644 59645 59646 59647 59650 59652 59651 59642 59649 59648 59640 59653  Dimensions and specifications may be changed without prior notice. (RN06) N 118 N UL-Style 3135 silicone single cores cable, 600V / 200°C, halogen-free   Technical data Cable structure Ⴠ Silicon single cores according UL subj.758 style3135 Ⴠ Temperature range -60 °C to +200 °C Ⴠ Nominal voltage 600 V Ⴠ Test voltage 2000 V Ⴠ Breakdown voltage min. 5000 V Ⴠ Minimum bending radius 15x cable ø Ⴠ Ⴠ Ⴠ Ⴠ Properties Ⴠ Halogen-free according to VDE0482 part267/ DINEN50267-2-1/ IEC60754-1 (equivalent DINVDE0472 part815) Ⴠ Resistant to High molecular oils, fats from vegetables and animals, alcohols, plasticizers and clophenes, diluted acids, lyes and salt dissolution, oxidation substances, tropical influences and weather, lake water, oxygen  Tinned copper conductors Stranded see table below Silicon core insulation Core colours see below Note Ⴠ Additional sizes on request.  Application UL-approved single cores for use in high, temperature areas. They are used mainly in the steel producing industries, in aviation industries as well as in ship building, cement, glas and ceramic factories. AWM = Appliance Wiring Material For internal wirings for electrical equipment and control apparatus e.g. electronic assembly components = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   AWG-No. Part no. 24 Part no. 22 Part no. 20 Part no. 18 Part no. 16 Part no. 14 Part no. 12 Conductor Core Ø construction approx. mm Cop. weight kg/km Weight approx. kg/km 1 x 0,5 2,1 1,9 6,3 3 x 0,4 2,4 3,6 9,2 5 x 0,4 2,6 6,0 12,3 7 x 0,4 2,8 8,6 15,5 11 x 0,4 3,0 13,3 21,0 17 x 0,4 3,4 20,5 29,7 27 x 0,4 3,8 32,6 43,2  Dimensions and specifications may be changed without prior notice. (RN06) N 119 black blue brown red white grey vio green 47021 o. r. 47028 o. r. 47035 o. r. 47042 o. r. 47049 o. r. 47056 o. r. 47063 o. r. 47022 o. r. 47029 o. r. 47036 o. r. 47043 o. r. 47050 o. r. 47057 o. r. 47064 o. r. 47023 o. r. 47030 o. r. 47037 o. r. 47044 o. r. 47051 o. r. 47058 o. r. 47065 o. r. 47024 o. r. 47031 o. r. 47038 o. r. 47045 o. r. 47052 o. r. 47059 o. r. 47066 o. r. 47025 o. r. 47032 o. r. 47039 o. r. 47046 o. r. 47053 o. r. 47060 o. r. 47067 o. r. 47026 o. r. 47033 o. r. 47040 o. r. 47047 o. r. 47054 o. r. 47061 o. r. 47068 o. r. 47027 o. r. 47034 o. r. 47041 o. r. 47048 o. r. 47055 o. r. 47062 o. r. 47069 o. r. 47076 o. r. 47071 o. r. 47072 o. r. 47073 o. r. 47074 o. r. 47075 o. r. 47070 o. r. Single 600-J/-O special single core cable, 0,6/1kV, meter marking   Technical data Cable structure Properties Ⴠ Special PVC control cable according to UL-Style10107 and CSAAWMI/IIA/B, adapted to DINVDE0281 part3, DINVDE0281 part13, to UL-Std.758 Ⴠ Temperature range flexing -5 °C bis +90 °C fixed installation -40 °C bis +90 °C Ⴠ Permissible operating temperature max. 90 °C at conductor Ⴠ Nominal voltage U0/U 06/1 kV nach UL+CSA 600V Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductors to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ 1. Core insulation of special PVC, TI2 to DINVDE0281 part1 and UL-Std.1581 class43, colour black or green-yellow Ⴠ 2. Core insulation (jacket) of special PVC, TM2 to DINVDE0821 part1 and ULStd.1581 class43, colour black (RAL9005) Ⴠ with meter marking, change-over in 2011  Ⴠ Chemical Resistance - see table Technical informations Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB), UL VW-1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Ⴠ Resistant to ultra violet rays  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core. Ⴠ AWG sizes are approximate equivalent values. The actual cross-section is in mm². Ⴠ screened analogue type: Single 600-CY -J/-O, see page N 121 Ⴠ alsoas 1000 V Style 10678 deliverable  Application PVC Single cores suitable for installation for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms as well as outside (fixed installation). Is not suitable to be used as direct burrial- or as underwater cable. These two norms approved single cores designed for exportorientated machinery manufacturer for machine tools, conveyor belts and production lines. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 10881 1G6 10882 1x6 10883 1G10 10884 1x10 10885 1G16 10886 1x16 10887 1G25 10888 1x25 10889 1G35 10890 1x35 10891 1G50 10892 1x50  AWG-No. Core colour 10 10 8 8 6 6 4 4 2 2 1 1 Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km green-yellow 7,8 58,0 118,0 black 7,8 58,0 118,0 green-yellow 9,0 96,0 180,0 black 9,0 96,0 180,0 green-yellow 10,0 154,0 250,0 black 10,0 154,0 250,0 green-yellow 11,5 240,0 370,0 black 11,5 240,0 370,0 green-yellow 13,0 336,0 490,0 black 13,0 336,0 490,0 green-yellow 15,6 480,0 665,0 black 15,6 480,0 665,0 N  Part no. No.cores x cross-sec. mm² 10893 1G70 10894 1x70 10895 1G95 10896 1x95 10897 1G120 10898 1x120 10899 1G150 10900 1x150 10901 1G185 10902 1x185 10903 1G240 10904 1x240 AWG-No. Core colour 2/0 2/0 3/0 3/0 4/0 4/0 300 kcmil 300 kcmil 350 kcmil 350 kcmil 500 kcmil 500 kcmil Outer Ø approx. mm green-yellow 17,9 black 17,9 green-yellow 19,5 black 19,5 green-yellow 22,3 black 22,3 green-yellow 25,0 black 25,0 green-yellow 28,6 black 28,6 green-yellow 31,4 black 31,4 Cop. weight kg/km 672,0 672,0 912,0 912,0 1152,0 1152,0 1440,0 1440,0 1776,0 1776,0 2304,0 2304,0 Weight approx. kg/km 910,0 910,0 1195,0 1195,0 1545,0 1545,0 1750,0 1750,0 2320,0 2320,0 2960,0 2960,0  Dimensions and specifications may be changed without prior notice. (RN06) N 120 Single 600-CY -J/-O special single core cable, Cu-screened, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special PVC control cable according to UL-Style10107 and CSA AWMI/IIA/B, adapted to DIN0281 part3, DINVDE0281 part13, to UL-Std.758 Ⴠ Temperature range flexing -5 °C bis +90 °C fixed installation -40 °C bis +90 °C Ⴠ Permissible operating temperature max. 90 °C at conductor Ⴠ Nominal voltage U0/U 06/1 kV Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 4x cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductors, to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ 1. Core isulation of special PVC, TI2 to DINVDE0281 part 1 and UL-Std.1581 class43, colour black or green-yellow Ⴠ Tinned copper braided screening, coverage approx. 85% Ⴠ 2. Core insulation of spezial PVC, TM2 to DINVDE0281 part1 and UL Std.1581 class43, colour black (RAL9005) Ⴠ with meter marking, change-over in 2011 Ⴠ Chemical Resistance - see table Technical Informations Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) UL VW-1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Ⴠ Resistant to ultra violet rays  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core. Ⴠ unscreened analogue type: Single 600-J/-O, siehe Seite N 120 Ⴠ also as 1000 V Style 10678 deliverable  Application PVC Single cores suitable for installation for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms as well as outside (fixed installation). Is not suitable to be used as direct burrial-or as underwater cable. These two norms approved single cores designed for exportorientated machinery manufacturer for machine tools, conveyor belts and production lines. These screened cables are particulary suitable for the interference-free transmission in instrumentation and control engineering applications (electromagnetic compatibility). EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 10910 1G6 10911 1x6 10912 1G10 10913 1x10 10914 1G16 10915 1x16 10916 1G25 10917 1x25 10918 1G35 10919 1x35 10920 1G50 10921 1x50  AWG-No. Core colour 10 10 8 8 6 6 4 4 2 2 1 1 Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km green-yellow 7,6 72,0 140,0 black 7,6 72,0 140,0 green-yellow 9,4 130,0 230,0 black 9,4 130,0 230,0 green-yellow 10,4 190,0 300,0 black 10,4 190,0 300,0 green-yellow 12,0 260,0 420,0 black 12,0 260,0 420,0 green-yellow 14,4 405,0 615,0 black 14,4 405,0 615,0 green-yellow 16,4 560,0 825,0 black 16,4 560,0 825,0  Dimensions and specifications may be changed without prior notice. (RN06) N 121  Part no. No.cores x cross-sec. mm² 10922 1G70 10923 1x70 10924 1G95 10925 1x95 10926 1G120 10927 1x120 10928 1G150 10929 1x150 10930 1G185 10931 1x185 10932 1G240 10933 1x240 AWG-No. Core colour 2/0 2/0 3/0 3/0 4/0 4/0 300 kcmil 300 kcmil 350 kcmil 350 kcmil 500 kcmil 500 kcmil Outer Ø approx. mm green-yellow 17,4 black 17,4 green-yellow 20,1 black 20,1 green-yellow 23,0 black 23,0 green-yellow 26,1 black 26,1 green-yellow 29,3 black 29,3 green-yellow 32,2 black 32,2 Cop. weight kg/km 780,0 780,0 1030,0 1030,0 1285,0 1285,0 1570,0 1570,0 1940,0 1940,0 2530,0 2530,0 Weight approx. kg/km 1090,0 1090,0 1395,0 1395,0 1770,0 1770,0 1930,0 1930,0 2635,0 2635,0 3380,0 3380,0 Single 602-RC* -J/O special single core cable for drag chains, 90°C, 600V, meter marking   Technical data Cable structure Properties Ⴠ Special PVC control cable according to UL-Style10107 and CSA AWM I/II AB, core according to DINVDE0281 part3 (except 300mm²) Ⴠ Temperature range flexing -5 °C to +90 °C fixed installation -40 °C to +90 °C Ⴠ Permissible operating temperature max. +90 °C at conductor Ⴠ Nominal voltage according to UL+CSA 600 V U0/U 600/1000 V Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 3x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, extra fine wire conductors, to DINVDE0295 cl.6, col.4, BS6360 cl.6 and IEC60228 cl.6, however by 185mm² up to 300mm² with reduced single wire-ø, max. 0,30mm Ⴠ 1. Core insulation of special PVC, TI3 to DINVDE0281 part1 and UL-Std.1581 class43 90 °C, wall-thickness to UL-Style10107 and DINVDE0281 part3, colour black or green-yellow Ⴠ 2. Core insulation (jacket) of special PVC, YM5 to DINVDE0207 part5 and UL-Std.1581 class43 90 °C, wall-thickness to UL-Style10107, colour black (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ Chemical Resistance - see table Technical Informations Ⴠ Resistant to mineral oils, synthetic oils and lubricating coolants. Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) UL VW-1 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Ⴠ Tests According to UL-Style10107/ UL-Std.1581, CSAC22.2 No210 Core according to DINVDE0281 part3 and part1 (HD21.3)  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ 300 mm² in adaption to DINVDE0281 Ⴠ screened analogue type: Single 602-RC*-CY -J/O, see page N 123  Application High flexible special single core cables for drag chains are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms. These two-norm cables primarily designed for exportorientated machinery manufacturer for flexible applications in machineries, machine tools, robot technics, for movable automated machinery parts. For applications which go beyond standard solutions (for example for composting appliances or high shelf conveyors with extremely high processing speeds etc.) we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. RC = Robotics Cable = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 69601 1G10 69602 1x10 69603 1G16 69604 1x16 69605 1G25 69606 1x25 69607 1G35 69608 1x35 69609 1G50 69610 1x50 69611 1G70 69612 1x70  AWG-No. Core colour 8 8 6 6 4 4 2 2 1 1 2/0 2/0 Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km green-yellow 9,4 96,0 180,0 black 9,4 96,0 180,0 green-yellow 10,5 154,0 250,0 black 10,5 154,0 250,0 green-yellow 11,6 240,0 370,0 black 11,6 240,0 370,0 green-yellow 14,5 336,0 490,0 black 14,5 336,0 490,0 green-yellow 16,6 480,0 665,0 black 16,6 480,0 665,0 green-yellow 18,4 672,0 910,0 black 18,4 672,0 910,0  Part no. No.cores x cross-sec. mm² 69613 1G95 69614 1x95 69615 1G120 69616 1x120 69617 1G150 69618 1x150 69619 1G185 69620 1x185 69621 1G240 69622 1x240 69623 1G300 69624 1x300 AWG-No. Core colour 3/0 3/0 4/0 4/0 300 kcmil 300 kcmil 350 kcmil 350 kcmil 500 kcmil 500 kcmil 600 kcmil 600 kcmil Outer Ø approx. mm green-yellow 20,5 black 20,5 green-yellow 23,0 black 23,0 green-yellow 25,2 black 25,2 green-yellow 29,0 black 29,0 green-yellow 32,5 black 32,5 green-yellow 35,4 black 35,4 Cop. weight kg/km 912,0 912,0 1152,0 1152,0 1440,0 1440,0 1776,0 1776,0 2304,0 2304,0 2880,0 2880,0 Weight approx. kg/km 1195,0 1195,0 1545,0 1545,0 1750,0 1750,0 2320,0 2320,0 2960,0 2960,0 3550,0 3550,0  Dimensions and specifications may be changed without prior notice. (RN06) N 122 N Single 602-RC* -CY -J/O special single core cable for drag chains, 90°C, 600V, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special PVC control cable according to UL-Style10107 and CSA AWM I/II A/B, core according to DINVDE0281 part3 (except 300mm²) Ⴠ Temperature range flexing -5 °C to +90 °C fixed installation -40 °C to +90 °C Ⴠ Permissible operating temperature max. +90 °C at conductor Ⴠ Nominal voltage according to UL+CSA 600 V U0/U 600/1000 V Ⴠ Test voltage 4000 V Ⴠ Breakdown voltage min. 8000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Minimum bending radius flexing 7,5x cable ø fixed installation 3x cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, extra fine wire conductors, to DINVDE0295 cl.6, col.4, BS6360 cl.6 and IEC60228 cl.6, however by 185mm² up to 300mm² with reduced single wire-ø, max. 0,30 mm Ⴠ 1. Core insulation of special PVC, TI3 to DINVDE0281 part1 and UL Std.1581 class43 90 °C, wall-thickness to UL-Style10107 and DINVDE0281 part3, colour black or green-yellow Ⴠ Tinned copper braided screening, coverage approx. 80% Ⴠ 2. Core insulation (jacket) of special PVC, YM5 to DINVDE0207 part5 and UL-Std.1581 class43 90 °C, wall-thickness to UL-Style10107, colour orange (RAL 2003) Ⴠ with meter marking, change-over in 2011 Ⴠ Chemical Resistance - see table Technical Informations Ⴠ Resistant to mineral oils, synthetic oils and lubricating coolants. Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB), UL VW-1 Ⴠ The materials used are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Ⴠ Tests According to UL-Style10107/ UL Std1581, CSAC22.2 No210 Core according to DINVDE0281 part3 and part1 (HD21.3)  Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ 300 mm² in adaption to DINVDE0281. Ⴠ non screened analogue type: Single 602-RC* -J/O, see page N 122  Application High flexible special single core screened cables for drag chains are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms. These two-norm cables primarily designed for exportorientated machinery manufacturer for flexible applications in machineries, machine tools, robot technics, for movable automated machinery parts. These screened cables are particulary suitable for the interference-free transmission in instrumentation and control engineering applications (electromagnetic compatibility). For applications which go beyond standard solutions we recommend for our especially developed enquiry sheet for energy guiding systems. Before installation in cable trays please read the instructions. Further technical details see selection table for drag chain cables, see lead text. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG. RC = Robotics Cable   Part no. 69631 69632 69633 69634 69635 69636 69637 69638 69639 69640 69641 69642  No.cores x cross-sec. mm² 1G10 1x10 1G16 1x16 1G25 1x25 1G35 1x35 1G50 1x50 1G70 1x70 AWG-No. Outer Ø approx. mm 8 10,0 8 10,0 6 11,1 6 11,1 4 12,3 4 12,3 2 15,1 2 15,1 1 17,2 1 17,2 2/0 19,0 2/0 19,0 Cop. weight kg/km 130,0 130,0 190,0 190,0 260,0 260,0 405,0 405,0 560,0 560,0 780,0 780,0 Weight approx. kg/km 230,0 230,0 300,0 300,0 420,0 420,0 615,0 615,0 825,0 825,0 1090,0 1090,0  Dimensions and specifications may be changed without prior notice. (RN06) N 123  Part no. 69643 69644 69645 69646 69647 69648 69649 69650 69651 69652 69653 69654 No.cores x cross-sec. mm² 1G95 1x95 1G120 1x120 1G150 1x150 1G185 1x185 1G240 1x240 1G300 1x300 AWG-No. Outer Ø approx. mm 3/0 22,0 3/0 22,0 4/0 23,6 4/0 23,6 300 kcmil 25,8 300 kcmil 25,8 350 kcmil 29,8 350 kcmil 29,8 500 kcmil 33,5 500 kcmil 33,5 600 kcmil 36,2 600 kcmil 36,2 Cop. weight kg/km 1030,0 1030,0 1285,0 1285,0 1570,0 1570,0 1940,0 1940,0 2530,0 2530,0 3140,0 3140,0 Weight approx. kg/km 1395,0 1395,0 1770,0 1770,0 1930,0 1930,0 2635,0 2635,0 3380,0 3380,0 4120,0 4120,0 MULTISPEED® 600-PUR -J/-O special single cores for drag chains, halogen-free, meter marking   Technical data Cable structure Properties Ⴠ Special drag chain core line for extreme mechanical stresses adapted to DINVDE0281 Part3 and ULstyle10553 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +90 °C Ⴠ Nominal voltage U0/U 600/1000 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 5 x core ø fixed installation 3 x core ø Ⴠ Bare copper conductor, ultra-fine wire to DINVDE0295 cl.6, column4, BS6360 cl.6 and/or IEC60228 cl.6 Ⴠ 1st core insulation from thermoplastic polymer in either black or green/yellow Ⴠ 2nd core insulation from special polyurethane, TMPU adapted to DINVDE0282, Part10, low-adhesion Ⴠ Sheath colour:black (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ  Flame retardant, FT1, VW-1 Halogen-free Abrasion resistant Very good oil resistance Very good alternating bending strength Very high resistance to mechanical stresses Higher notch resistance Ozone and UV-resistant Coolant resistant The materials used in manufacture are silicon and cadmium-free and contain no substances harmful to the wetting properties of lacquers Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ screened analogue type: MULTISPEED® 600-C-PUR -J/-O, see page N 125  Application These special drag chain core cables permit extended use with extreme requirements, with free movement, without tensile stresses or forced movements. Suitable for installation in long traverse paths and high speeds in dry, high temperature influence in dry, moist and wet environments and in the open air. These cables can be used for all applications demanding the highest requirements in flexibility, abrasion resistance, ozone and chemical resistance. For applications extending beyond standard solutions (e.g. composting plants or high-lift conveyor systems working at extremely low speeds), we recommend that you request our questionnaire, which has been especially designed for energy supply systems. Before installation in cable trays please read the instructions. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 25888 25269 25889 25270 25890 25271 25891 25272 25892 25273 25893 25274 25894 25275  No.cores x cross-sec. mm² 1G6 1x6 1G10 1x10 1G16 1x16 1G25 1x25 1G35 1x35 1G50 1x50 1G70 1x70 Outer Ø Cop. approx. mm weight kg/km 7,2 58,0 7,2 58,0 8,4 96,0 8,4 96,0 9,5 154,0 9,5 154,0 11,0 240,0 11,0 240,0 13,0 336,0 13,0 336,0 15,4 480,0 15,4 480,0 17,2 672,0 17,2 672,0 Weight approx. kg/km 80,0 80,0 130,0 130,0 181,0 181,0 274,0 274,0 398,0 398,0 529,0 529,0 717,0 717,0 AWG-No. 10 10 8 8 6 6 4 4 2 2 1 1 2/0 2/0  Part no. 25895 25276 25896 25277 25897 25278 25898 25279 25899 25280 25900 25281 No.cores x cross-sec. mm² 1G95 1x95 1G120 1x120 1G150 1x150 1G185 1x185 1G240 1x240 1G300 1x300 Outer Ø Cop. approx. mm weight kg/km 20,0 912,0 20,0 912,0 21,0 1152,0 21,0 1152,0 23,8 1440,0 23,8 1440,0 26,2 1776,0 26,2 1776,0 29,8 2304,0 29,8 2304,0 33,1 2880,0 33,1 2880,0 Weight approx. kg/km 1050,0 1050,0 1240,0 1240,0 1524,0 1524,0 1932,0 1932,0 2467,0 2467,0 3140,0 3140,0 AWG-No. 3/0 3/0 4/0 4/0 300 kcmil 300 kcmil 350 kcmil 350 kcmil 500 kcmil 500 kcmil 600 kcmil 600 kcmil  Dimensions and specifications may be changed without prior notice. (RN06) N 124 N MULTISPEED® 600-C-PUR -J/-O special cable for drag chains, screened, halogen-free, EMC-preferred type, meter marking   Technical data Cable structure Properties Ⴠ Special drag chain core cable for mechanical stresses adapted to DINVDE0281 Part3 and UL-Style10553 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +90 °C Ⴠ Nominal voltage U0/U 600/1000 V Ⴠ Test voltage 3000 V Ⴠ Insulation resistance min. 100 MOhm x km Ⴠ Minimum bending radius flexing 5 x core ø fixed installation 3 x core ø Ⴠ Bare copper conductor, ultra-fine wire to DINVDE0295 cl.6, column4, BS6360 cl.6 and/or IEC60228 cl.6 Ⴠ 1st core insulation from thermoplastic polymer in either black or green/yellow Ⴠ Braided screen of tinned Cu wires, coverage approx. 85% Ⴠ Core wrapping with fleece Ⴠ 2nd insulation from special polyurethane, TMPU adapted to DINVDE0282, Part10, low-adhesion Ⴠ Sheath colour black (RAL 9005) Ⴠ with meter marking, change-over in 2011 Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ  Flame retardant, FT1, VW-1 Halogen-free Abrasion resistant Very good oil resistance Very good alternating bending strength Very high resistance to mechanical stresses Improved notch resistance Ozone and UV-resistant Coolant-resistant The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Note Ⴠ G = with green-yellow earth core; x = without green-yellow earth core (OZ). Ⴠ Please observe applicable installation regulations for use in energy supply chains. Ⴠ unscreened analogue type: MULTISPEED® 600-PUR -J/-O, see page N 124  Application These special drag chain core cables permit extended use with extreme requirements, with free movement, without tensile stresses or forced movements. Suitable for installation in long traverse paths and high speeds in dry, high temperature influence in dry, moist and wet environments and in the open air. These cables can be used for all applications demanding the highest requirements in flexibility, abrasion resistance, ozone and chemical resistance. The copper screening assures a disturbance-free data and signal transmission for measuring and control systems. For applications extending beyond standard solutions (e.g. composting plants or high-lift conveyor systems working at extremely low speeds), we recommend that you request our questionnaire, which has been especially designed for energy supply systems. Before installation in cable trays please read the instructions. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 25901 25282 25902 25283 25903 25284 25904 25285 25905 25286 25906 25287 25907 25288  No.cores x cross-sec. mm² 1G6 1x6 1G10 1x10 1G16 1x16 1G25 1x25 1G35 1x35 1G50 1x50 1G70 1x70 Outer Ø Cop. approx. mm weight kg/km 7,8 71,0 7,8 71,0 9,7 122,0 9,7 122,0 11,7 180,0 11,7 180,0 13,2 282,0 13,2 282,0 15,2 386,0 15,2 386,0 18,7 535,0 18,7 535,0 21,2 750,0 21,2 750,0 Weight approx. kg/km 101,0 101,0 168,0 168,0 217,0 217,0 342,0 342,0 468,0 468,0 584,0 584,0 822,0 822,0 AWG-No. 10 10 8 8 6 6 4 4 2 2 1 1 2/0 2/0  Dimensions and specifications may be changed without prior notice. (RN06) N 125  Part no. 25908 25289 25909 25290 25910 25291 25911 25292 25912 25293 25913 25294 No.cores x cross-sec. mm² 1G95 1x95 1G120 1x120 1G150 1x150 1G185 1x185 1G240 1x240 1G300 1x300 Outer Ø Cop. approx. mm weight kg/km 23,4 1004,0 23,4 1004,0 24,5 1260,0 24,5 1260,0 27,8 1570,0 27,8 1570,0 29,4 1911,0 29,4 1911,0 34,2 2451,0 34,2 2451,0 37,4 2997,0 37,4 2997,0 Weight approx. kg/km 1190,0 1190,0 1400,0 1400,0 1710,0 1710,0 2021,0 2021,0 2601,0 2601,0 3257,0 3257,0 AWG-No. 3/0 3/0 4/0 4/0 300 kcmil 300 kcmil 350 kcmil 350 kcmil 500 kcmil 500 kcmil 600 kcmil 600 kcmil ... for static installation TOPSERV® 108 PVC TOPSERV® 112 PVC TOPSERV® 119 PVC TOPGEBER® 511 PVC ... for dynamic installation TOPSERV® 109 PUR TOPSERV® 113 PUR TOPSERV® 121 PUR TOPGEBER® 512 PUR TOPFLEX® 600 VFD TOPFLEX® 650 VFD TOPSERV® 600 VFD TOPSERV® 650 VFD TOPFLEX®-EMV-UV-2YSLCYK-J TOPFLEX®-EMV-UV-3 PLUS 2YSLCYK-J TOPFLEX® EMV UV 2YSLC11Y-J TOPFLEX® MOTOR EMV 1/1 TOPFLEX® MOTOR EMV 3/3 TOPFLEX® MOTOR 103 VERTEILERFLEX Zwei-Norm Photo: HELUKABEL® UL/CSA Motor, Servo & Feedback Cables N 126 N TOPSERV® 108 PVC Motor cable without pair according to Siemens Standard 6FX5008 with PVC-outer sheath for fixed or not constantly movements 0,6/1kV   Technical data Cable structure Properties Ⴠ Special PVC Motorcable acc. to ULAWMStyle2570 and CSAAWM Ⴠ Temperature range flexing -0 °C to +60 °C fixed installation -20 °C to +80 °C Ⴠ Nominal voltage acc. to UL/CSA 1000 V acc. to VDE U0/U = 600/1000 V Ⴠ A.c. test voltage, 50 Hz  power supply cores 4000 V  Ⴠ Minimum bending radius flexing approx. 15x cable ø fixed installation approx. 5x cable ø Ⴠ max. 100.000 cycles Ⴠ Bare copper, fine wire conductors acc. to DINEN60228 cl.5 Ⴠ core insulation Polypropylenuntil 6mm²; PVC from 10mm² Ⴠ Black power supply cores with whiteimprint Ⴠ Green-yellow earth core Ⴠ power supply cores laid up with optimal lay length and stabilising filler Ⴠ Overall screening from tinned copper braid, optimal. coverage approx. 85% Ⴠ PVC outer sheath Ⴠ Sheath colour orange (RAL 2003) according to DESINA® Ⴠ with meter marking, change-over in 2011  Ⴠ low capacitance until 6mm²(included) Ⴠ oilresistant PVC outer sheath Ⴠ PVC sheath flame retardant according to VDE0482-332-1-1 to -1-3 Ⴠ Optimum compliance with requirements for electromagnetic compatibility (EMC) by approx. 85% coverage from the braided screen Ⴠ These cables are produced to high quality specifications and conform to the DESINA®-standard Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers   Note Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ the corresponding Encodercables mit PVCJacket can be found under heading TOPGEBER® 511 PVC the Motorcables for application in drag chain with PUR Jacket can be found under heading TOPSERV® 109 PUR Brackets ( ) indicate screen. Desina®: Explanation: see introduction. SIEMENS product designations 6FX 5008- are registered trademarks of Siemens AG, and are to be used only for purposes of comparison.  Application low cost alternativ to Motorcables with PUR Jacket for fix instalation.The cables have an overall screen to ensure EMC compatibility, i.e. for protection against electromagnetic interference. Production is based on the specifications of established manufacturers of servo-drives and controls, as well as on various VDE, UL and CSA standards. Applications include machine, plant and robot construction, automation, drive, control and production engineering. Attractive for export-oriented mechanical and system engineering. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 707250 707251 707252 707253 707254 707255 707256 707257 707258 No.cores x cross-sec. mm² ( 4G1,5) ( 4G2,5) ( 4G4) ( 4G6) ( 4G10) ( 4G16) ( 4G25) ( 4G35) ( 4G50) for system OEM Part no. Jacket colour Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens 6FX5008-1BB11 6FX5008-1BB21 6FX5008-1BB31 6FX5008-1BB41 6FX5008-1BB51 6FX5008-1BB61 6FX5008-1BB25 6FX5008-1BB35 6FX5008-1BB50 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003  Dimensions and specifications may be changed without prior notice. (RN07) N 127 Outer Ø approx. mm 8,0 9,6 11,0 13,1 19,3 23,3 26,9 30,3 34,5 Cop. weight kg/km 78,0 130,0 198,0 288,0 463,0 701,0 1068,0 1449,0 2096,0 Weight approx. kg/km 118,0 179,0 260,0 638,0 705,0 1055,0 1509,0 1976,0 2781,0 AWG-No. 16 14 12 10 8 6 4 2 1 TOPSERV® 112 PVC Servo cable with 1 signal pair according to Siemens Standard 6FX5008 and Lenze Standard with PVC-sheath for fixed or not constantly movements 0,6/1kV   Technical data Cable structure Properties Ⴠ Special PVC Motorcable acc. to ULAWMStyle2570 and 21179 CSAAWM Ⴠ Temperature range flexing -0 °C to +60 °C fixed installation -20 °C to +80 °C Ⴠ Nominal voltage acc. to UL/CSA 1000 V acc. to VDE power supply cores U0/U 600/1000 V control cores U0/U 300/500 V Ⴠ A.c. test voltage, 50 Hz power supply cores 4000 V control cores 1000V Ⴠ Minimum bending radius flexing approx. 15x cable ø fixed installation approx. 5x cable ø Ⴠ max. 100.000 cycles Ⴠ Bare copper, fine wire conductors acc. to DINEN60228 cl.5 Ⴠ core insulation Polypropylen until 6mm²; PVC from 10mm² Ⴠ Black power supply cores with white imprint Ⴠ Green-yellow earth core Ⴠ Black control cores with white imprint Ⴠ Screening of the control cores in pairs wrapped with plastic foil and tinned copper braided screening, approx. coverage 85% Ⴠ Control cores stranded in pairs and laid up in layers together with the power supply cores with optimal lay length and stabilising filler Ⴠ Overall screening from tinned copper braid, optimal. coverage approx. 85% Ⴠ PVC outer sheath Ⴠ Sheath colour orange (RAL 2003) according to DESINA®  marking Ⴠ with meter  Ⴠ low capacitance until 6mm²(included) Ⴠ oilresistant PVC outer sheath Ⴠ PVC sheath flame retardant according to VDE0482-332-1-1 to -1-3 Ⴠ Optimum compliance with requirements for electromagnetic compatibility (EMC) by approx. 85% coverage from the braided screen Ⴠ These cables are produced to high quality specifications and conform to the DESINA®-standard Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers   Note Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ the corresponding Encoder cables mit PVC Jacket can be foundunder heading TOPGEBER® 511 PVC the Motorcables for application in drag chain with PUR Jacket can be found under heading TOPSERV® 113 PUR Brackets ( ) indicate screen. Desina®: Explanation: see introduction. SIEMENS product designations 6FX 5008- are registered trademarks of Siemens AG, and are to be used only for purposes of comparison. LENZE product designations are registered trademarks of LENZE AG, and are to be used only for purposes of comparison.  Application Low cost alternativ to supply cables with PUR Jacket for fix instalation or occasional moving applications. The combination of feeder cores with the control cores for the braking function in these cables is ideal. The cables have an overall screen to ensure EMC compatibility, i.e. for protection against electromagnetic interference. Production is based on the specifications of established manufacturers of servo-drives and controls, as well as on various VDE, UL and CSA standards. Applications include machine, plant and robot construction, automation, drive, control and production engineering. Attractive for export-oriented mechanical and system engineering. To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 707221 707222 707223 707224 707225 No.cores x cross-sec. mm² ( 4G1 + (2 x 0,5)) ( 4G1,5 + (2 x 0,5)) ( 4G2,5 + (2 x 0,5)) ( 4G4 + (2 x 1,0)) ( 4G6 + (2 x 1,0)) for system OEM Part no. Jacket colour Lenze Lenze Lenze Lenze Lenze - Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 for system OEM Part no. Jacket colour Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens 6FX5008-1BA11 6FX5008-1BA21 6FX5008-1BA31 6FX5008-1BA41 6FX5008-1BA51 6FX5008-1BA61 6FX5008-1BA25 6FX5008-1BA35 6FX5008-1BA50 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Outer Ø approx. mm 9,5 11,0 12,3 14,6 16,7 Cop. weight kg/km 88,0 106,0 152,0 229,0 312,0 Weight approx. kg/km 136,0 178,0 274,0 365,0 515,0 AWG-No. Outer Ø approx. mm 10,4 12,0 13,6 15,6 21,0 24,1 28,3 31,4 34,5 Cop. weight kg/km 140,0 185,0 257,0 348,0 416,0 476,0 555,0 611,0 710,0 Weight approx. kg/km 190,0 256,0 341,0 454,0 794,0 1125,0 1576,0 2049,0 2818,0 AWG-No. 17 16 14 12 10   Part no. 707280 707281 707282 707283 707284 707285 707286 707287 707288 No.cores x cross-sec. mm² ( 4G1,5 + (2 x 1,5)) ( 4G2,5 + (2 x 1,5)) ( 4G4 + (2 x 1,5)) ( 4G6 + (2 x 1,5)) ( 4G10 + (2 x 1,5)) ( 4G16 + (2 x 1,5)) ( 4G25 + (2 x 1,5)) ( 4G35 + (2 x 1,5)) ( 4G50 + (2 x 1,5)) 16 14 12 10 8 6 4 2 1  Dimensions and specifications may be changed without prior notice. (RN07) N 128 N TOPSERV® 119 PVC Servo cable with 2 signal pairs analogue Indramat Standard with PVC-sheath for fixed or not constantly movements 0,6/1kV   Technical data Cable structure Properties Ⴠ Special PVC Motorcable acc. to ULAWMStyle2570 CSAAWM Ⴠ Temperature range flexing -0 °C to +60 °C fixed installation -20 °C to +80 °C Ⴠ Nominal voltage acc. to UL/CSA 1000 V acc. to VDE power supply cores U0/U 600/1000 V control cores U0/U 300/500 V Ⴠ A.c. test voltage, 50 Hz power supply cores 4000 V control cores 1000V Ⴠ Minimum bending radius flexing approx. 15x cable ø fixed installation approx. 5x cable ø Ⴠ max. 100.000 cycles Ⴠ Bare copper, fine wire conductors acc. to DINEN60228 cl.5 Ⴠ core insulation Polypropylen until 6mm²; PVC from 10mm² Ⴠ Black power supply cores with white imprint Ⴠ Green-yellow earth core Ⴠ Black control cores with white imprint Ⴠ Screening of the control cores in pairs wrapped with plastic foil and tinned copper braided screening, approx. coverage 85% Ⴠ Control cores stranded in pairs and laid up in layers together with the power supply cores with optimal lay length and stabilising filler Ⴠ Overall screening from tinned copper braid, optimal. coverage approx. 85% Ⴠ PVC outer sheath Ⴠ Sheath colour orange (RAL 2003) according to DESINA® Ⴠ with meter marking  Ⴠ low capacitance until 6mm²(included) Ⴠ oilresistant PVC outer sheath Ⴠ PVC sheath flame retardant according to VDE0482-332-1-1 to -1-3 Ⴠ Optimum compliance with requirements for electromagnetic compatibility (EMC) by approx. 85% coverage from the braided screen Ⴠ These cables are produced to high quality specifications and conform to the DESINA®-standard Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers   Note Ⴠ the corresponding Encoder cables mit PVC Jacket can be found underheading TOPGEBER® 511 PVC Ⴠ the Motorcables for application in drag chain with PUR Jacket can be found under heading TOPSERV® 121 PUR Ⴠ Brackets ( ) indicate screen. Desina®: Explanation: see introduction. Ⴠ INDRAMAT product designations INK- are registered trademarks of Bosch Rexroth AG and are to be used only for purposes of comparison.  Application The combination of supply cores with the control cores for the braking function and the thermal protection in these cables is ideal. Precision servomotors, as used today in many areas of highly-automated manufacturing processes, call for high-quality, reliable and long-lasting cables. These requirements are met to a high degree by these cables. The cables have an additional overall screen to ensure EMC compatibility, i.e. for protection against electromagnetic interference. Production is based on the specifications of established manufacturers of servo-drives and controls, as well as on various VDE, UL and CSA standards. Applications include machine, plant and robot construction, automation, drive, control and production engineering. Attractive for export-oriented mechanical and system engineering. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 707290 707291 707292 707293 707294 707295 707296 No.cores x cross-sec. mm² ( 4G1 + 2 x (2 x 0,75)) ( 4G1,5 + 2 x (2 x 0,75)) ( 4G2,5 + 2 x (2 x 1,0)) ( 4G4 + (2 x 1,0) + (2 x 1,5)) ( 4G6 + (2 x 1,0) + (2 x 1,5)) ( 4G10 + (2 x 1,0) + (2 x 1,5)) ( 4G16 + 2 x (2 x 1,5)) for system OEM Part no. Jacket colour Indramat Indramat Indramat Indramat Indramat Indramat Indramat INK-0653 INK-0650 INK-0602 INK-0603 INK-0604 INK-0605 INK-0606 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003  Dimensions and specifications may be changed without prior notice. (RN07) N 129 Outer Ø approx. mm 12,0 12,4 14,6 16,0 18,8 22,4 26,9 Cop. weight kg/km 130,0 155,0 216,0 297,0 374,0 545,0 804,0 Weight approx. kg/km 218,0 256,0 346,0 443,0 596,0 825,0 1217,0 AWG-No. - TOPGEBER® 511 PVC Feedback cables according to Siemens-, Lenze- or Indramat Standard with PVC-sheath for fixed or not constantly movements   Technical data Cable structure Properties Ⴠ Special PVC feedback cable acc. to ULAWM style20233 and CSA Ⴠ Temperature range flexing -0 °C to +60 °C fixed installation -20 °C to +80 °C Ⴠ Nominal voltage acc. to UL 300 V 0,14-0,34 mm²: 350 V 0,5-1,0 mm²: 500 V Ⴠ A.c. test voltage, 50 Hz core/core 2000 V core/screen 1000 V Ⴠ Minimum bending radius flexing approx. 12x cable ø fixed installation approx. 6x cable ø Ⴠ max. 100.000 cycles Ⴠ Bare copper, ultra-fine wire conductors acc. to DINVDE0295 cl.6 Ⴠ Core insulation of special polypropylene Ⴠ Core colours on request Ⴠ Overall screening of tinned copper wire braid with tinned drain wire, coverage approx. 85% Ⴠ Polyester foil Ⴠ PVC outer sheath Ⴠ Sheath colour green (RAL 6018) acc. to DESINA® or orange Ⴠ with meter marking, change-over in 2009 Colour code: Ⴠ Part No. 78081 0,5 mm² whrd, whye, whbk, whbu Ⴠ Part No. 79613 0,5 mm² wh, bn  Ⴠ low capacitance Ⴠ oilresistant PVC outer sheath Ⴠ PVC sheath flame retardant according to VDE0482-332-1-1 to -1-3 Ⴠ Optimum compliance with requirements for electromagnetic compatibility (EMC) by approx. 85% coverage from the braided screen Ⴠ These cables are produced to high quality specifications and conform to the DESINA®-standard Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers   Note Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ the corresponding Motor- and Servocableswith PVC Jacket can be found under heading TOPSERV® 112 PVC the Encodercables for application in drag chain with PUR Jacket can be found under heading TOPGEBER® 512 PUR Brackets ( ) indicate screen. SIEMENS product designations 6FX 5008-... are registered trademarks of Siemens AG, and are to be used only for purposes of comparison. INDRAMAT product designations INK- are registered trademarks of Bosch-Rexroth AG, and are to be used only for purposes of comparison. LENZE product designations are registered trademarks ofLENZE AG, and are to be used only for purposes of comparison. Desina®: Explanation: see introduction.  Application Low cost alternativ to Motorcables with PUR Jacket for fix instalation or occasional moving applications.These low-capacitance incremental encoder cables or position feedback cables transmit the control pulses for positioning and operating characteristics of servomotors. These cables are used as connecting cables for tachos, brakes and pulse generators inindustrial equipment, machine tools, control and automation equipment. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 707417 707389 707390 803672 802471 705461 707392 707394 707077 707397 707398 No.cores x cross-sec. mm² ( 4 x 2x0,38 + 4 x 0,5) ( 3 x (2x0,14) + 4 x 0,14 + 2 x 0,5) (3 x (2 x 0,14) + 4 x 0,14 + 4 x 0,25 + 2 x 0,5) (2 x 2 x 0,22 + 1 x 2 x 0,34) (2 x 2 x 0,22) ( 4 x 2x0,25 + 2 x 0,5) ( 4 x 2x0,25 + 2 x 1,0) (4 x 2 x 0,14 + 4 x 1,0 + (4 x 0,14)) 3 x (2 x 0,14) + (2 x 0,5) 4 x (2 x 0,14) + (2 x 1,0) 3 x (2 x 0,14) + (3 x 0,14) for system OEM Part no. Jacket colour Siemens Siemens Siemens Siemens Siemens Indramat Indramat Indramat Lenze Lenze Lenze 6FX 5008-1BD21 6FX 5008-1BD41 6FX 5008-1BD51 6FX 8008-2DC00 6FX 8008-1DC00 INK-0448 INK-0209 INK-0532 - Green Green Green Green Green Orange Orange Orange Green Green Green Outer Ø approx. mm 8,9 8,8 9,6 6,9 6,9 8,4 8,8 9,7 9,3 11,0 9,2 Cop. weight kg/km 70,3 58,0 70,7 38,0 35,0 50,0 64,0 86,0 46,0 70,0 41,0 Weight approx. kg/km 117,8 118,9 137,7 61,0 71,0 99,0 119,0 149,0 95,0 145,0 102,0 AWG-No. -  Dimensions and specifications may be changed without prior notice. (RN07) N 130 N TOPSERV® 109 PUR PUR, high flexible motor cable for drag chain without pairs according to Siemens Standard 6FX8008-plus 0,6/1kV   Technical data Cable structure Properties Ⴠ Special PUR drag chain cable acc. to ULAWM Style21223 CSAAWM Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +90 °C Ⴠ Nominal voltage acc. to UL/CSA 1000 V acc. to VDE U0/U 600/1000 V Ⴠ A.c. test voltage, 50 Hz 4000 V Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Minimum bending radius flexing approx. 7,5x cable ø fixed installation approx. 4x cable ø Ⴠ Bare copper, ultra-fine wire acc. to DINVDE0295 cl.6 and/or IEC60228 cl.6 Ⴠ core insulation Polypropylen, halogen-free Ⴠ Black cores with sequential numbering imprinted in white Ⴠ Green-yellow earth core Ⴠ Cores stranded together with optimal lay-length and stabilising filler Ⴠ Fleece wrapping facilitates sliding Ⴠ Tinned copper braided screening, coverage approx. 85% Ⴠ PUR outer sheath Ⴠ Sheath colour orange (RAL 2003) according to DESINA® Ⴠ with meter marking, change-over in 2011  Ⴠ Low adhesion, flame retardant, extremely abrasion resistant, halogen-free, resistant to UV, oil, hydrolysis and microbial attack PUR sheath Ⴠ PUR sheath self-extinguishing and flame retardant according to VDE0482-332-1-2, DIN EN60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ Optimized insulation materials ensure resistance to oils (including mineral oils), greases, coolants, hydraulic fluids as well as many alkalis and solvents. Ⴠ Optimum compliance with requirements for electromagnetic compatibility (EMC) by approx. 85% coverage from the braided screen Ⴠ These cables are produced to high quality specifications and conform to the DESINA® standard. Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers   Note the corresponding Encoder cables can be found under TOPGEBER® 512PUR the Motorcables forstatic application or application with occasional movementwith PVC Jacket can be found under TOPSERV® 109 PVC SIEMENS product designations 6FX 8008-plus... are registered trademarks of Siemens AG, and are to be used only for purposes of comparison. For extreme applications extending beyond standard solutions we recommend that you request our questionnaire, which has been especially designed for energy supply systems. Ⴠ Please observe applicable installation regulations for use in energy supply chains. Ⴠ Desina®: Explanation: see introduction. Ⴠ Ⴠ Ⴠ Ⴠ  Application Supply cable optimised especially for the supply of DNC motors. These cables are specially designed for use in power drag chains, handling equipment, robotics, tooling machinery, processing and manufacturing machinery. The optimised outside diameter, reduced weight and excellent torsion characteristics facilitate use in multi-shift operation with extreme alternating bending stress cycles. Particularly recommended as a supply cable between frequency converters and servomotors. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 75943 75944 75945 75946 75947 75948 75949 75950 75951 700437 700897 No.cores x cross-sec. mm² ( 4G1,5) ( 4G2,5) ( 4G4) ( 4G6) ( 4G10) ( 4G16) ( 4G25) ( 4G35) ( 4G50) ( 4G70) ( 4G95) for system OEM Part no. Jacket colour Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens 6FX8008-1BB11 6FX8008-1BB21 6FX8008-1BB31 6FX8008-1BB41 6FX8008-1BB51 6FX8008-1BB61 6FX8008-1BB25 6FX8008-1BB35 6FX8008-1BB50 6FX8008-1BB70 - Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003  Dimensions and specifications may be changed without prior notice. (RN07) N 131 Outer Ø approx. mm 9,1 10,6 11,9 14,5 17,5 21,6 25,4 28,6 33,4 42,5 49,5 Cop. weight kg/km 90,0 132,0 204,0 315,0 488,0 769,0 1100,0 1510,0 2133,0 3029,0 4606,0 Weight approx. kg/km 159,0 235,0 323,0 464,0 672,0 1089,0 1523,0 2080,0 2710,0 4123,0 0,0 AWG-No. 16 14 12 10 8 6 4 2 1 2/0 3/0 TOPSERV® 113 PUR PUR, high flexible servo cable for drag chain with 1 signal pair according to Siemens Standard 6FX8008-plus and Lenze 0,6/1kV   Technical data Cable structure Properties Ⴠ Special PUR drag chain cable acc. to ULAWMStyle21223, 20234 and CSAAWM VDE-registered Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage acc. to UL/CSA 1000 V acc. to VDE power supply cores U0/U 600/1000 V control cores U0/U 300/500 V Ⴠ A.c. test voltage, 50 Hz power supply cores 4000 V control cores 1000 V Ⴠ Insulation resistance min. 20 Ohm x km Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Minimum bending radius flexing approx. 7,5x cable ø fixed installation approx. 4x cable Ⴠ Bare copper, ultra-fine wire conductors acc. to DINVDE0295 cl.6 and/or IEC60228 cl.6 Ⴠ Polypropylenecore insulation, halogen-free Ⴠ Black power supply cores with white imprint Ⴠ Green-yellow earth core Ⴠ Black control cores with white imprint Ⴠ Screening of the control cores in pairs wrapped with plastic aluminium foil, copper drain-wire tinned and tinned copper braided screening, approx. coverage 85% Ⴠ Control cores stranded in pairs and laid up in layers together with the power supply cores with optimal lay length and stabilising filler Ⴠ Fleece wrapping facilitates sliding Overall screening from tinned copper braid, optimal. coverage approx. 85% Ⴠ PUR outer sheath Ⴠ Sheath colour orange (RAL 2003) according to DESINA® Ⴠ with meter marking, change-over in 2011 Ⴠ low capacitance Ⴠ PUR outer sheath: low adhesion, extremely abrasion resistant, halogen-free, resistant to UV-, oil-, hydrolysis and microbial attack Ⴠ PUR sheath: self-extinguishing and flame retardant according to VDE0482-332-1-2, DIN EN60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ Optimized insulation materials ensure resistance to oils (including mineral oils), greases, coolants, hydraulic fluids as well as many alkalis and solvents. Ⴠ Optimum compliance with requirements for electromagnetic compatibility (EMC) by approx. 85% coverage from the braided screen Ⴠ These cables are produced to high quality specifications and conform to the DESINA®-standard Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers   Note Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ the corresponding encoder cables with PUR jacket can be found under TOPGEBER® 512 PUR the Servocables for stativ application oder occasional movements can be found under TOPSERV® 112 PVC Brackets ( ) indicate screen. Desina®: Explanation: see introduction. SIEMENS product designations 6FX 8008-are registered trademarks of Siemens AG, and are to be used only for purposes of comparison. LENZE product designationsare registered trademarks of LENZE AG, and are to be used only for purposes of comparison.  Application The combination of supply cores with the control cores for the braking function in these cables is ideal. Precision servomotors, as used today in many areas of highly-automated manufacturing processes, call for high-quality, reliable and long-lasting cables. These requirements are met to a high degree by these cables. The cables have an additional overall screen to ensure EMC compatibility, i.e. for protection against electromagnetic interference. Production is based on the specifications of established manufacturers of servo-drives and controls, as well as on various VDE, UL and CSA standards. Applications include machine, plant and robot construction, automation, drive, control and production engineering. Attractive for export-oriented mechanical and system engineering. Please observe applicable installation regulations for use in energy supply chains. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Continuation Ⴇ N 132 N TOPSERV® 113 PUR PUR, high flexible servo cable for drag chain with 1 signal pair according to Siemens Standard 6FX8008-plus and Lenze 0,6/1kV  Part no. 707228 707229 707230 707231 707232 707746 707747 No.cores x cross-sec. mm² ( 4G1 + (2 x 0,5)) ( 4G1,5 + (2 x 0,5)) ( 4G2,5 + (2 x 0,5)) ( 4G4 + (2 x 1,0)) ( 4G6 + (2 x 1,0)) ( 4G10 + (2 x 1,0)) ( 4G16 + (2 x 1,0)) for system OEM Part no. Jacket colour Lenze Lenze Lenze Lenze Lenze Lenze Lenze - Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 for system OEM Part no. Jacket colour Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens 6FX8008-1BA11 6FX8008-1BA21 6FX8008-1BA31 6FX8008-1BA41 6FX8008-1BA51 6FX8008-1BA61 6FX8008-1BA25 6FX8008-1BA35 6FX8008-1BA50 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 for system OEM Part no. Jacket colour - - Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Outer Ø approx. mm 10,5 11,5 13,2 14,6 16,8 20,1 23,8 Cop. weight kg/km 88,0 106,0 152,0 229,0 312,0 508,0 751,0 Weight approx. kg/km 161,0 186,0 263,0 337,0 488,0 688,0 1046,0 AWG-No. Outer Ø approx. mm 11,6 13,4 14,8 16,8 19,4 23,1 26,6 30,9 34,0 Cop. weight kg/km 148,0 187,0 268,0 358,0 584,0 825,0 1283,0 1850,0 2540,0 Weight approx. kg/km 228,0 346,0 393,0 519,0 849,0 1260,0 1620,0 2166,0 3039,0 AWG-No. Outer Ø approx. mm 11,5 11,5 11,5 13,6 15,0 16,1 20,2 23,8 27,0 31,9 36,7 Cop. weight kg/km 134,0 127,0 138,0 177,0 258,0 348,0 574,0 815,0 1273,0 1840,0 2530,0 Weight approx. kg/km 250,0 240,0 254,0 328,0 462,0 596,0 912,0 1194,0 1499,0 1992,0 2880,0 AWG-No. 16 16 14 12 10 8 6   Part no. 78948 78949 78950 78951 78952 75956 75957 75958 75959 No.cores x cross-sec. mm² ( 4G1,5 + (2 x 1,5)) ( 4G2,5 + (2 x 1,5)) ( 4G4 + (2 x 1,5)) ( 4G6 + (2 x 1,5)) ( 4G10 + (2 x 1,5)) ( 4G16 + (2 x 1,5)) ( 4G25 + (2 x 1,5)) ( 4G35 + (2 x 1,5)) ( 4G50 + (2 x 1,5)) 16 14 12 10 8 6 4 2 1   Part no. 77376 700199 74506 74507 74508 74514 74509 74510 74511 74512 74513 No.cores x cross-sec. mm² ( 4G1 + (2 x 0,75)) ( 4G1,5 + (2 x 0,5)) ( 4G1,5 + (2 x 1,0)) ( 4G2,5 + (2 x 1,0)) ( 4G4 + (2 x 1,0)) ( 4G6 + (2 x 1,0)) ( 4G10 + (2 x 1,0)) ( 4G16 + (2 x 1,0)) ( 4G25 + (2 x 1,0)) ( 4G35 + (2 x 1,0)) ( 4G50 + (2 x 1,0))  Dimensions and specifications may be changed without prior notice. N 133 17 16 16 14 12 10 8 6 4 2 1 TOPSERV® 121 PUR PUR, high flexible servo cable for drag chain with 2 Signal pairs according to Indramat-Standard INK   Technical data Cable structure Properties Ⴠ Special PUR drag chain cable acc. to ULAWMStyle20234 and CSAAWM Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage acc. to UL/CSA 1000 V acc. to VDE power supply cores U0/U 600/1000 V control cores U0/U 300/500 V Ⴠ A.c. test voltage, 50 Hz power supply cores 4000 V control cores 1000 V Ⴠ Insulation resistance min. 20 Ohm x km Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Minimum bending radius flexing approx. 7,5x cable ø fixed installation approx. 4x cable ø Ⴠ Bare copper, ultrafine wire conductors acc. to DINVDE0295 Kl.6 bzw. IEC60228 cl.6 Ⴠ core insulation Polypropylen until 6mm² Ⴠ Black power supply cores with white imprint Ⴠ Green-yellow earth core Ⴠ Black control cores with white imprint Ⴠ Screening of the control cores in pairs wrapped with plastic aluminium foil, copper drain-wire tinned and tinned copper braided screening, approx. coverage 85% Ⴠ Control cores stranded in pairs and laid up in layers together with the power supply cores with optimal lay length and stabilising filler Ⴠ Overall screening from tinned copper braid, optimal. coverage approx. 85% Ⴠ PUR outer sheath Ⴠ Sheath colour orange (RAL 2003) according to DESINA® Ⴠ with meter marking, change-over in 2011  Ⴠ low capacitance Ⴠ PUR outer sheath: low adhesion, extremely abrasion resistant, halogen-free, resistant to UV-, oil-, hydrolysis and microbial attack Ⴠ PUR sheath: self-extinguishing and flame retardant, test method B acc. to DINVDE0472 part804 and IEC60332-1 Ⴠ Optimum compliance with requirements for electromagnetic compatibility (EMC) by approx. 85% coverage from the braided screen Ⴠ These cables are produced to high quality specifications and conform to the DESINA®-standard Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers   Note Ⴠ the corresponding Encoder cablescan be found under TOPGEBER® 512 PUR Ⴠ the Servocables for stativ application oder occasional movements can be found under TOPSERV® 119 PVC Ⴠ Indramat Artikelbezeichnungen INK sind eingetragene Warenzeichen der Bosch Rexroth AG und dienen nur zu Vergleichszwecken  Application The combination of supply cores with the control cores for the braking function and the thermal protection in these cables is ideal. Precision servomotors, as used today in many areas of highly-automated manufacturing processes, call for high-quality, reliable and long-lasting cables. These requirements are met to a high degree by these cables. The cables have an additional overall screen to ensure EMC compatibility, i.e. for protection against electromagnetic interference. Production is based on the specifications of established manufacturers of servo-drives and controls, as well as on various VDE, UL and CSA standards. Applications include machine, plant and robot construction, automation, drive, control and production engineering. Attractive for export-oriented mechanical and system engineering. Please observe applicable installation regulations for use in energy supply chains. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. 706003 73774 76103 73579 700561 73580 78955 74094 700562 78956 74095 700563 78957 74096 700564 78958 75978 75979 75980 700565 No.cores x cross-sec. mm² ( 4G0,75 + (2 x 0,5)) ( 4G1 + 2 x (2 x 0,75)) ( 4G1,5 + 2 x (2 x 0,5)) ( 4G1,5 + 2 x (2 x 1,0)) ( 4G1,5 + 2 x (2 x 0,75)) ( 4G2,5 + 2 x (2 x 1,0)) ( 4G2,5 + 2 x (2 x 1,5)) ( 4G4 + 2 x (2 x 1,0)) ( 4G4 + (2 x 1,0) + (2 x 1,5)) ( 4G4 + 2 x (2 x 1,5)) ( 4G6 + 2 x (2 x 1,0)) ( 4G6 + (2 x 1,0) + (2 x 1,5)) ( 4G6 + 2 x (2 x 1,5)) ( 4G10 + 2 x (2 x 1,0)) ( 4G10 + (2 x 1,0) + (2 x 1,5)) ( 4G10 + 2 x (2 x 1,5)) ( 4G16 + 2 x (2 x 1,5)) ( 4G25 + 2 x (2 x 1,5)) ( 4G35 + 2 x (2 x 1,5)) ( 4G50 + 2 x (2 x 2,5)) for system OEM Part no. Jacket colour Indramat Indramat Indramat Indramat Indramat Indramat Indramat Indramat Indramat Indramat Indramat INK-0670 INK-0653 INK-0650 INK-0602 INK-0603 INK-0604 INK-0605 INK-0606 INK-0607 INK-0667 INK-0668 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Orange RAL 2003 Outer Ø approx. mm 10,0 11,5 12,4 12,6 12,2 14,6 15,6 16,2 16,0 16,7 18,2 18,8 19,0 21,5 22,4 22,4 26,9 28,0 32,5 37,0 Cop. weight kg/km 77,0 148,0 145,0 182,0 170,0 229,0 241,0 312,0 318,0 324,0 437,0 445,0 450,0 609,0 610,0 625,0 904,0 1323,0 1621,0 2600,0 Weight approx. kg/km 166,0 254,0 250,0 262,0 290,0 336,0 350,0 475,0 485,0 490,0 606,0 615,0 621,0 905,0 915,0 925,0 1226,0 1595,0 2196,0 3000,0 AWG-No. 17 17 17 16 16 14 14 12 12 12 10 10 10 8 8 8 6 4 2 1  Dimensions and specifications may be changed without prior notice. (RN07) N 134 N TOPGEBER® 512 PUR PUR, high flexible Feedback cable for drag chain according to Siemens, Indramat, Lenze and other Standards   Technical data Cable structure Properties Ⴠ Special PUR drag chain feedback cable acc. to ULAWM style20233 and 20236and CSA Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage acc. to UL 300 V 0,14-0,34 mm²: 350 V 0,5-1,0 mm²: 500 V Ⴠ A.c. test voltage, 50 Hz core/core 2000 V core/screen 1000 V Ⴠ Mutual capacitance at 800 Hz core/core approx. 70 nF/km core/screen approx. 110 nF/km Ⴠ Insulation resistance min. 20 MOhm x km Ⴠ Coupling resistance max. 250 Ohm Ⴠ Minimum bending radius flexing approx. 10x cable ø fixed installation approx. 6x cable ø Ⴠ tinned copper, ultra-fine wire conductors acc. to DINVDE0295 cl.6 Ⴠ Core insulation of special polypropylene Ⴠ Core colours on demand Ⴠ Fleece wrapping facilitates sliding Ⴠ Overall screening of tinned copper wire braid with tinned drain wire, coverage approx. 85% Ⴠ Polyester foil Ⴠ PUR outer sheath Ⴠ Sheath colour green (RAL 6018) acc. to DESINA® or orange Ⴠ with meter marking, change-over in 2011  Ⴠ PUR outer sheath: low adhesion, extremely abrasion resistant, halogen-free, resistant to UV-, oil-, hydrolysis and microbial attack Ⴠ Special feature: These cables are produced to high quality specifications and conform to the DESINA®-standard Ⴠ Due to the high grade special core insulation, the PUR sheath and the highly flexible conductor, these cables are ideally suitable for use in drag chains and provide high functional reliability Ⴠ Optimum compliance with requirements for electromagnetic compatibility (EMC) by approx. 85% coverage from the braided screen Ⴠ Particularly attractive for export-oriented markets due to UL/CSA approval Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers   Note Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ Ⴠ the corresponding Motor- and Servocables can be found under TOPSERV® 109 respectively 113 PUR Encoder cablesfor static application with PVC Jacket can be found under TOPGEBER® 511 PVC Brackets ( ) indicate screen. SIEMENS product designations 6FX 8008-... are registered trademarks of Siemens AG, and are to be used only for purposes of comparison. INDRAMAT product designations INK- are registered trademarks of Bosch-Rexroth AG, and are to be used only for purposes of comparison. Desina®: Explanation: see introduction.  Application These low-capacitance incremental encoder cables or position feedback cables transmit the control pulses for positioning and operating characteristics of servomotors. These cables are used as connecting cables for tachos, brakes and pulse generators in applications subjected to heavy mechanical stresses in industrial equipment, machine tools, control and automation equipment. Please observe applicable installation regulations for use in energy supply chains. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Continuation Ⴇ N 135 TOPGEBER® 512 PUR PUR, high flexible Feedback cable for drag chain according to Siemens, Indramat, Lenze and other Standards  Part no. 700655 78081 707400 700657 700540 700654 700653 78079 802473 706333 705413 707403 707404 707405 707406 707407 702050 78080 77741 707738 707739 707740 707408 707418 707409 77743 79513 707410 700560 77753 78963 78828 79613 77744 78372 77750 705221 No.cores x cross-sec. mm² ( 8 x 2x0,18) ( 4 x 2x0,38 + 4 x 0,5) ( 3 x (2x0,14) + 2 x 0,5) ( 3 x (2x0,14) + 4 x 0,14 + 2 x 0,5) ( 3 x (2x0,14) + 4 x 0,14 + 4 x 0,25 + 2 x 0,5) ( 4 x 2x0,18) ( 2 x 2x0,18) ( 12x0,25) ( 2 x 2x0,15 + 2 x 0,38) ( 5 x 2x0,25 + 2 x 0,5) ( 3 x 2x0,25 + 2 x 0,5) ( 3 x 2x0,25) ( 5 x 2x0,14 + 2 x 0,5) 3 x (2 x 0,14) + (2 x 0,5) 4 x (2 x 0,14) + (2 x 1,0) 3 x (2 x 0,14) + (3 x 0,14) (4 x 2 x 0,25 + 2 x 1,0) ( 4 x 2x0,25 + 2 x 0,5) ( 9x0,5) ( 4 x 2x0,25 + 2 x 1,0) ( 4 x 2x0,25 + 2 x 0,5) ( 9x0,5) (4 x 2 x 0,14 + 4 x 1,0 + (4 x 0,14)) (3 x (2 x 0,25) + 3 x 0,25 + 2 x 1,0) (2 x 2 x 0,25 + 2 x 0,5) ( 3 x (2x0,14) + 2 x (1 x 0,5)) ( 4 x 2x0,14 + 4 x 0,5) ( 3 x 2x0,14 + 2 x 1,0) (4 x 2 x 0,14 + (4 x 0,14) + 4 x 0,5) ( 10x0,14 + 2 x 0,5) ( 5 x 2x0,14 + 2 x 0,5) ( 3 x 2x0,25) ( 5 x 2x0,38 + 2 x 0,5) ( 3 x (2x0,14) + 2 x 1,0) ( 3 x 2x0,14 + 2 x 0,5) ( 4 x (2x0,25) + 2 x 1,0) ( 4 x 2x0,25) for system OEM Part no. Jacket colour Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens Siemens Berger Lahr Elau B+R B+R Lenze Lenze Lenze Indramat Indramat Indramat Indramat Indramat Indramat Indramat Indramat Indramat Heidenhain Heidenhain Heidenhain Heidenhain Heidenhain Baumüller - 6FX 8008-1BD11 6FX 8008-1BD21 6FX 8008-1BD31 6FX 8008-1BD41 6FX 8008-1BD51 6FX 8008-1BD61 6FX 8008-1BD71 6FX 8008-1BD81 6FX 8008-2DC00 INK-0209 grün INK-0448 grün INK-0208 grün INK-0209 INK-0448 INK-0208 INK-0532 INK-0280 INK-0750 - Green Green Green Green Green Green Green Green Green Green Green Green Green Green Green Green Green Green Green Orange Orange Orange Orange Orange Orange Green Green Green Green Green Green Green Green Green Green Green Green Outer Ø approx. mm 7,8 9,8 9,0 8,9 9,6 6,4 5,0 7,5 7,0 8,8 7,4 6,5 8,7 9,8 11,3 10,3 8,8 8,5 8,8 8,8 8,5 8,8 9,7 9,0 7,2 8,4 8,5 9,1 8,3 7,2 9,0 7,2 8,6 8,2 7,2 10,5 7,5 Cop. weight kg/km 54,0 83,0 74,0 66,0 75,0 35,0 24,0 65,0 41,0 69,0 43,0 31,0 48,0 42,0 66,0 41,0 64,0 51,0 69,0 64,0 51,0 69,0 81,0 84,0 38,0 54,0 52,0 72,0 81,0 43,0 72,0 55,0 69,0 71,0 35,0 93,0 39,0 Weight approx. kg/km 79,0 135,0 119,0 120,0 138,0 57,0 42,0 74,0 72,0 127,0 82,0 60,0 98,0 98,0 144,0 127,0 99,0 106,0 124,0 99,0 106,0 124,0 142,0 134,7 79,0 109,0 100,0 132,0 104,0 83,0 98,0 83,0 130,0 107,0 67,0 175,0 88,0 AWG-No. 24 21 21 26 24 24 24 24 24 24 24 24 24 24 20 20 20 20 20 20 20 26 26 26 26 24 21 26 26 24 24  Dimensions and specifications may be changed without prior notice. (RN07) N N 136 TOPFLEX® 600 VFD EMC-preferred type, flexible motor power supply cable, oil-resistant, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ PVC motor supply cable according to UL1277 Ⴠ Temperature range -25ºC to +90ºC Ⴠ Nominal voltage TC 600 V WTTC 1000 V Ⴠ Test voltage 4000 V Ⴠ Minimum bending radius Flexing 6x cable ø Ⴠ Coupling resistance Max. 250 Ohm/km Ⴠ Tinned copper conductor, fine wire stranded with AWG measures Ⴠ Special PVC core insulation with transparent nylon skin Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer Ⴠ Cores stranded in layers with optimal lay-lenghts Ⴠ Fleece Ⴠ 1. Screening with special aluminium foil Ⴠ 2. Screening with braid of tinnedcopper wires, optimal coverage, approx. 85% Ⴠ Separator Ⴠ Special PVC outer jacket Ⴠ Sheath colour -black (RAL 9005) or orange (RAL 2003) Ⴠ With length marking in feet  Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Ⴠ UV-resistant Ⴠ Tests  UL: TC-ER, WTTC 1000 V, MTW, NFPA 79 2007, UL 1277, PLTC-ER (AWG 18 - AWG 12), ITC-ER (AWG 18 - AWG 12) OIL RES I & II, 90º C dry / 75º C wet, Cold Bend Test -40ºC Class 1 Div. 2 per NEC Art. 336, 392, 501 CSA: c (UL) CIC-TC FT4, AWM I/II A/B FT4   Note Ⴠ VFD = Variable Frequency Drive  Application Flexible, extremly oil-resistant motor supply cable for modern servomotors; the double-screening with special aluminium foil (100% coverage) and tinned copper braid (approx. 85% coverage) provides effective protection against electrical disturbance and the resultant failures. Approved to NFPA 79 2007 for open, unprotected installation on cable trays and from cable trays to the machine. The special PVC sheath is extremly resistant to oil, coolants and solvents and hence the perfect solution for industrial applications with open installation, installation in pipes and in the earth. EMC = Electromagnetic compatibility To optimise EMC characteristics, we recommend a large contact area for the copper braiding around the entire circumference on both ends. = The product conforms to the EG Low-Voltage Directive 2006/95/EG  Dimensions and specifications may be changed without prior notice. (RN01) N 137 TOPFLEX® 650 VFD EMC-preferred type, flexible motor power supply cable with control cores, oil-resistant, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ TPE motor supply cable according to UL1277 Ⴠ Temperature range Flexing -25ºC to +105ºC Ⴠ Nominal voltage TC 600 V WTTC 1000 V Ⴠ Test voltage Power supply cores 4000 V Control cores 2000 V Ⴠ Minimum bending radius Flexing 6x cable ø Ⴠ Coupling resistance Max. 250 Ohm/km Ⴠ Tinned copper conductor, fine wire stranded, with AWG measures Ⴠ Special PVC core insulation with transparent nylon skin Ⴠ Black supply cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer Ⴠ 2 black control cores with marking 5 and 6 Ⴠ Control cores screened in pairs with plastic-coated aluminium foil, tinned drain wire Ⴠ Control cores stranded in pairs and laid up in layers with optimal lay-length with the power supply cores Ⴠ 1. Screening with plastic-coated aluminium foil Ⴠ 2. Screening from tinned Cu-braid, optimal coverage approx. 85% Ⴠ Separator Ⴠ Special TPE outer jacket Ⴠ Sheath colour - black (RAL 9005) or orange (RAL 2003) Ⴠ With length marking in feet Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Ⴠ UV-resistant Ⴠ Tests UL: TC-ER, WTTC 1000 V, MTW, NFPA 79 2007, UL 1277, PLTC-ER (AWG 18 - AWG 12), ITC-ER (AWG 18 - AWG 12) OIL RES I & II, 90º C dry / 75º C wet Class 1 Div. 2 per NEC Art. 336, 392, 501 Cold Bend Test -40ºC CSA: c (UL) CIC-TC FT4 AWM I/II A/B FT4  Note Ⴠ VFD = Variable Frequency Drive  Application Flexible, extremly oil-resistant motor supply cable for modern servomotors; the double-screening with special aluminium foil (100% coverage) and tinned copper braid (approx. 85% coverage) provides effective protection against electrical disturbance and the resultant failures. Approved to NFPA 79 2007 for open, unprotected installation on cable trays and from cable trays to the machine. The special PVC sheath is extremly resistant to oil, coolants and solvents and hence the perfect solution for industrial applications with open installation, installation in pipes and in the earth.  EMC = Electromagnetic compatibillity To optimise EMC characteristics, we recommend a large contact area for the copper braiding around the entire circumference on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.  Dimensions and specifications may be changed without prior notice. (RN01) N 138 N TOPSERV® 600 VFD EMC-preferred type, flexible motor power supply cable, oil-resistant, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ PVC motor supply cable according to UL1277 Ⴠ Temperature range -25ºC to +90ºC Ⴠ Nominal voltage TC 600 V WTTC 1000 V Ⴠ Test voltage 4000 V Ⴠ Minimum bending radius Flexing 5x cable ø Permanently flexing 7,5 cable ø Ⴠ Coupling resistance Max. 250 Ohm/km Ⴠ Tinned copper conductor, extra fine wire stranded with AWG measures Ⴠ Special PVC core insulation with transparent nylon skin Ⴠ Black cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer Ⴠ Cores stranded in layers with optimal lay-lenghts Ⴠ Fleece Ⴠ 1. Screening with special aluminium foil Ⴠ 2. Screening with braid of tinned copper wires, optimal coverage, approx. 85% Ⴠ Separator Ⴠ Special PVC outer jacket Ⴠ Sheath colour - black (RAL 9005) or orange (RAL 2003) Ⴠ With length marking in feet Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Ⴠ UV-resistant Tests UL: TC-ER, WTTC 1000 V, MTW, NFPA 79 2007, UL 1277, PLTC-ER (AWG 18 - AWG 12), ITC-ER (AWG 18 - AWG 12) OIL RES I & II, 90º C dry / 75º C wet, Cold Bend Test -40ºC CSA: c (UL) CIC-TC FT4, AWM I/II A/B FT4   Note Ⴠ VFD = Variable Frequency Drive  Application Flexible, extremly oil-resistant motor supply cable for modern servomotors; the double-screening with special aluminium foil (100% coverage) and tinned copper braid (approx. 85% coverage) provides effective protection against electrical disturbance and the resultant failures. Approved to NFPA 79 2007 for open, unprotected installation on cable trays and from cable trays to the machine. The special TPE sheath is extremly resistant to oil, coolants and solvents and hence the perfect solution for industrial applications with open installation, installation in pipes and in the earth. EMC = Electromagnetic compatibility To optimise EMC characteristics, we recommend a large contact area for the copper braiding around the entire circumference on both ends. = The product conforms to the EG Low-Voltage Directive 2006/95/EG  Dimensions and specifications may be changed without prior notice. (RN01) N 139 TOPSERV® 650 VFD EMC-preferred type, flexible motor power supply cable with control cores, oil-resistant, NFPA 79 Edition 2007   Technical data Cable structure Properties Ⴠ TPE motor supply cable according to UL 1277 Ⴠ Temperature range Flexing -25ºC to +105ºC Ⴠ Nominal voltage TC 600 V WTTC 1000 V Ⴠ Test voltage Power supply cores 4000 V Control cores 2000 V Ⴠ Minimum bending radius Flexing 5x cable ø Permanently flexing 7,5 cable ø Ⴠ Coupling resistance Max. 250 Ohm/km Ⴠ Tinned copper conductor, fine wire stranded, with AWG measures Ⴠ Special PVC core insulation with transparent nylon skin Ⴠ Black supply cores with continuous white numbering Ⴠ Green-yellow earth core in the outer layer Ⴠ 2 black control cores with marking 5 and 6 Ⴠ Control cores screened in pairs with plastic-coated aluminium foil, tinned drain wire Ⴠ Control cores stranded in pairs and laid up in layers with optimal lay-length with the power supply cores Ⴠ 1. Screening with plastic-coated aluminium foil Ⴠ 2. Screening from tinned Cu-braid, optimal coverage approx. 85% Ⴠ Separator Ⴠ Special TPE outer jacket Ⴠ Sheath colour - black (RAL 9005) or orange (RAL 2003) Ⴠ Self-extinguishing and flame retardant in accordance with CSA FT4 Ⴠ The materials used in manufacture are free of silicone, cadmium and substances that impair paint wetting Ⴠ UV-resistant Tests UL: TC-ER, WTTC 1000 V, MTW, NFPA 79 2007, UL 1277, PLTC-ER (AWG 18 - AWG 12), ITC-ER (AWG 18 - AWG 12) OIL RES I & II, 90º C dry / 75º C wet Class 1 Div. 2 per NEC Art. 336, 392, 501 Cold Bend Test -40ºC CSA: c (UL) CIC-TC FT4 AWM I/II A/B FT4   Note Ⴠ VFD = Variable Frequency Drive Ⴠ with meter marking in feet  Application Highly-flexible, extremly oil-resistant motor supply cable for modern servomotors; the double-screening with special aluminium foil (100% coverage) and tinned copper braid (approx. 85% coverage) provides effective protection against electrical disturbance and the resultant failures. Approved to NFPA 79 2007 for open, unprotected installation on cable trays and from cable trays to the machine. The special TPE sheath is extremly resistant to oil, coolants and solvents and hence the perfect solution for industrial applications with open installation, installation in pipes and in the earth.  EMC = Electromagnetic compatibillity To optimise EMC characteristics, we recommend a large contact area for the copper braiding around the entire circumference on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.  Dimensions and specifications may be changed without prior notice. (RN01) N 140 N TOPFLEX®-EMV-UV-2YSLCYK-J UL/CSA Motor supply cable 0,6/1kV, for power supply connections to frequency converters, double screened, meter marking.   Technical data Cable structure Properties Ⴠ Special motor power supply cable for frequency converters to Style 2570 Ⴠ Temperature range flexing -5 °C bis +70 °C fixed installation -40 °C bis +70 °C Ⴠ Nominal voltage VDE - U0/U 0,6/1 kV UL - U 1000 V Ⴠ Operating voltage, max. A.C. and 3-phase 700/1200 V DC operation 900/1800 V Ⴠ Test voltage 2500 V Ⴠ Insulation resistance min. 200 MOhm x km Ⴠ Coupling resistance depending on the cross-section max. 250 Ohm/km Ⴠ Mutual capacitance depending on the cross-section core/core - 70 up to 250 nF/km core/screen - 110 up to 410 nF/km Ⴠ Minimum bending radius fixed installation for outer ø: up to 12 mm: 5x cable ø >12 to 20 mm: 7,5x cable ø >20 mm: 10x cable ø free-movement for outer ø: up to 12 mm: 10x cable ø >12 to 20 mm: 15x cable ø >20 mm: 20x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductor to style2570 Ⴠ Polyethylene (PE) core insulation Ⴠ Core colour: green-yellow, brown, black and grey Ⴠ Cores stranded in concentric layers Ⴠ 1. screening with special aluminum foil Ⴠ 2. screening with copper braiding, tinned copper, coverage approx. 80% Ⴠ Special PVC outer sheath, schwarz (RAL 9005) Ⴠ with meter marking, change-over in 2011  Ⴠ Behavior in fire: Test according to VDE0482-332-1-2, DIN EN60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ Low mutual capacitance Ⴠ PE-insulation secures a lower dielectric loss, double potential strength, high longevity and low screen-interference currents Ⴠ Low coupling resistance for high electromagnetic compatibility Ⴠ Resistant to ultra violet rays Ⴠ This enables an extremely concentric structure Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Ⴠ This screened motor supply cable with low mutual capacitance of the single cores because of the special PE core insulation and low screen capacitance enable a low-loss transmission of the power compared to PVC-sheathed connecting cables Ⴠ Due to the optimal screening an interference-free operation of frequency converters is obtained  Application This TOPFLEX®-EMV-UV-2YSLCYK-J UL/CSA motor connection cable for the frequency converters secures the EMC in systems and buildings, equipment with devices and machineries, which can emit electromagnetic interference fields that can impact the environment in an illegal manner. It is used as a connection and connecting cable under average mechanical stress for fixed installations and sometimes for free movement in dry, moist and wet rooms and outside. It is used in the automotive industry, food processing industry, transfer streets, packaging industry, machine tools, handling equipment, in the industry it is used for pumps, fans, transport belts, etc. Used in explosion proof areas. EMC = Electromagnetic compatibility The screen must be connected at both ends and ensure lare-area contact over the entire cable circumference for compliance with the functional interference requirements of EN 55011. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 22320 22321 22322 22323 22324 22325 22326 22327 4G1,5 4G2,5 4G4 4G6 4G10 4G16 4G25 4G35 Outer Ø Mutual capacitance approx. mm Core / Core Core / Screen approx. nF / approx. nF / km km 10,4 12,5 80 130 14,2 90 150 15,2 90 150 19,5 120 200 22,9 140 230 27,1 120 210 29,6 150 260 Coupling resistance at 1 MHz at 30 MHz Ohm/km Ohm/km Power ratings **) with 3 loaded cores inAmperes Cop. weight kg/km Weight approx. kg/km 18 11 6 7 9 4 3 18 26 34 44 61 82 108 135 95,0 150,0 235,0 320,0 533,0 789,0 1236,0 1662,0 140,0 300,0 485,0 630,0 860,0 1290,0 1860,0 2610,0 210 210 150 180 190 95 85 AWG-No. 16 14 12 10 8 6 4 2  Continuation Ⴇ N 141 TOPFLEX®-EMV-UV-2YSLCYK-J UL/CSA Motor supply cable 0,6/1kV, for power supply connections to frequency converters, double screened, meter marking.  Part no. No.cores x cross-sec. mm² 22328 22329 22330 22331 22332 22333 4G50 4G70 4G95 4G120 4G150 4G185 Outer Ø Mutual capacitance approx. mm Core / Core Core / Screen approx. nF / approx. nF / km km 35,2 190 320 41,4 190 320 46,0 250 410 50,8 58,3 65,5 Coupling resistance at 1 MHz at 30 MHz Ohm/km Ohm/km Power ratings **) with 3 loaded cores inAmperes Cop. weight kg/km Weight approx. kg/km 2 2 1 168 207 250 292 335 382 2345,0 3196,0 4316,0 5435,0 6394,0 7639,0 2950,0 3950,0 5300,0 6600,0 7040,0 8380,0 40 45 50 AWG-No. 1 2/0 3/0 4/0 300 kcmil 350 kcmil  Dimensions and specifications may be changed without prior notice. (RD01) Tools Cable shears Box spanners Strippers Crimping tools Pliers Skinning knife N You can find tools in our catalogue Cable Accessories. Request it now at www.helukabel.de N 142 TOPFLEX®-EMV-UV 2YSLCYK-J UL/CSA Motor supply cable 0,6/1kV, for power supply connections to frequency converters, double screened, meter marking.   Technical data Cable structure Properties Ⴠ Special motor power supply cable for frequency converters to Style 2570 Ⴠ Temperature range flexing -5 °C bis +70 °C fixed installation -40 °C bis +70 °C Ⴠ Nominal voltage VDE - U0/U 0,6/1 kV UL - U 1000 V Ⴠ Operating voltage, max. A.C. and 3-phase 700/1200 V DC operation 900/1800 V Ⴠ Peak value Û 1700 V Ⴠ Test voltage 2500 V Ⴠ Insulation resistance min. 200 MOhm x km Ⴠ Coupling resistance depending on the cross-section max. 250 Ohm/km Ⴠ Minimum bending radius fixed installation for outer ø: up to 12 mm: 5x cable ø >12 to 20 mm: 7,5x cable ø >20 mm: 10x cable ø free-movement for outer ø: up to 12 mm: 10x cable ø >12 to 20 mm: 15x cable ø >20 mm: 20x cable ø Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductor to DINVDE0295 cl.5, BS6360 cl.5 and IEC60228 cl.5 Ⴠ Polyethylene (PE) core insulation Ⴠ Core colour: black, brown, grey, green-yellow (earth core divided into 3) Ⴠ Cores stranded in concentric layers Ⴠ 3+3 core design Ⴠ 1. screening with special aluminum foil Ⴠ 2. screening with copper braiding, tinned copper, coverage approx. 80% Ⴠ Special PVC outer sheath, schwarz (RAL 9005) Ⴠ with meter marking, change-over in 2011  Ⴠ Behavior in fire: Test according to VDE0482-332-1-2, DIN EN60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ PE-insulation secures a lower dielectric loss, double potential strength, high longevity and low screen-interference currents Ⴠ Low mutual capacitance Ⴠ Meets EMC requirements according to EN55011 and DINVDE0875 part11 Ⴠ Low coupling resistance for high electromagnetic compatibility Ⴠ Due to the optimal screening an interference-free operation of frequency converters is obtained Ⴠ The 3 Plus-construction of motor power supply cables features a symmetrical 3-core design, improved in terms of EMC characteristics comparing favorably with a 4-core version Ⴠ The protective conductor PE, divided into 3 is uniformly stranded in the interstices Ⴠ This enables an extremely concentric structure Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Ⴠ The minimum cross-section of 0,75² meets the requirements of DINEN60204 part1 Ⴠ Resistant to ultra violet rays Ⴠ This screened motor supply cable with low mutual capacitance of the single cores because of the special PE core insulation and low screen capacitance enable a low-loss transmission of the power compared to PVC-sheathed connecting cables.  Application It is used as a connection and connecting cable under average mechanical stress for fixed installation and sometimes for free movement in dry, moist and wet rooms and outside. It is used in the automotive industry, food processing industry, transfer streets, packaging industry, machine tools, handling equipment, in the industry it is used for pumps, fans, transport belts and in air condition systems, etc. Used in explosion proof areas. EMC = Electromagnetic compatibility The screen must be connected at both ends and ensure lare-area contact over the entire cable circumference for compliance with the functional interference requirements of EN 55011. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.  Continuation Ⴇ N 143 TOPFLEX®-EMV-UV 2YSLCYK-J UL/CSA Motor supply cable 0,6/1kV, for power supply connections to frequency converters, double screened, meter marking.  Part no. 22193 22194 22195 22196 22197 22198 22199 22223 22224 22225 22226 22227 22228 22229 22230 No.cores x cross-sec. mm² ( 3 x 1,5 + 3G0,25) ( 3 x 2,5 + 3G0,5) ( 3 x 4 + 3G0,75) ( 3 x 6 + 3G1,0) ( 3 x 10 + 3G1,5) ( 3 x 16 + 3G2,5) ( 3 x 25 + 3G4,0) ( 3 x 35 + 3G6,0) ( 3 x 50 + 3G10,0) ( 3 x 70 + 3G10,0) ( 3 x 95 + 3G16,0) ( 3 x 120 + 3G16,0) ( 3 x 150 + 3G25,0) ( 3 x 185 + 3G35,0) ( 3 x 240 + 3G42,5) Outer Ø approx. mm 10,0 11,4 13,0 15,0 18,4 21,0 25,3 27,8 32,6 38,1 41,0 46,4 53,5 59,5 65,1 Coupling resistance at 1 MHz at 30 MHz Ohm/km Ohm/km 18 11 6 7 9 4 3 2 2 1 210 210 150 180 190 95 85 40 45 50 Power ratings **) with 3 loaded cores inAmperes 18 26 34 44 61 82 108 135 168 207 250 292 335 382 Cop. weight kg/km 86,0 144,0 224,0 298,0 491,0 723,0 1138,0 1535,0 2208,0 2871,0 3953,0 4836,0 5412,0 6969,0 8540,0 Weight approx. kg/km 140,0 220,0 323,0 420,0 615,0 819,0 1325,0 1718,0 2399,0 3056,0 4162,0 5075,0 6128,0 7189,0 9540,0 AWG-No. 16 14 12 10 8 6 4 2 1 2/0 3/0 4/0 300 kcmil 350 kcmil 500 kcmil  Dimensions and specifications may be changed without prior notice. (RD01) Signal and power circular connectors Series A, B, C, D, F and S Tools Accessories Online configurator Pre-assembled cables N You can find signal and power circular connectors in our catalogue Cable Accessories. Request it now at www.helukabel.de N 144 TOPFLEX®-EMV-UV 2YSLC11Y-J UL/CSA Motor supply cable 0,6/1kV, for power supply connections to frequency converters, double screened, meter marking.   Technical data Cable structure Properties Ⴠ Special PURmotor power supply cable for frequency converters to UL AWMstyle 20234 and CSA AWM adapted to DINVDE0250 Ⴠ Temperature range flexing -5 °C to +70 °C fixed installation -40 °C to +70 °C Ⴠ Nominal voltage to UL 1000 V to VDE U0/U 0,6/1 kV Ⴠ A.c. test voltage, 50 Hz 3000 V Ⴠ Mutual capacitance at 4 kHz, according to different cross-sections core/core 70 to 250 nF/km core/screen 110 to 410 nF/km Ⴠ Insulation resistance min. 200 MOhm x km Ⴠ Minimum bending radius fixed installation for outer ø: up to 12 mm: approx. 5x cable ø >12 to 20 mm: approx. 7,5x cable ø >20 mm: approx. 10x cable ø free-movement for outer ø: up to 12 mm: approx. 10x cable ø >12 to 20 mm: approx. 15x cable ø >20 mm: approx. 20x cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Radiation-resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductor to DINVDE0295 cl.5, BS6360 cl.5 or IEC60228 cl.5 Ⴠ Polyethylen (PE) core insulation Ⴠ Core colours: black, brown, grey, green-yellow Ⴠ Cores stranded in concentric layers Ⴠ 1. screening with special aluminium film Ⴠ 2. screening with copper braiding, tinned copper, coverage approx. 80% Ⴠ PUR-outer sheath Ⴠ Sheath colour black (RAL 9005) Ⴠ with meter marking, change-over in 2011  Ⴠ PUR outer sheath: low adhesion, flame retardant, extremely abradion resistant, halogen-free, resistant to UV, oil, hydrolysis and microbial attack  Ⴠ PUR sheath: self-extinguishing and flame retardant, to VDE 0482-332-1-2, DIN EN 60332-1-2/IEC 60332-1( equivalent DIN VDE 0472 part 804 test method B) Ⴠ Low mutual capacitance, to DINVDE0472 part504, test methodB Ⴠ Features PE-insulation secures a lower dielectric loss, double potential strength, high longevity and low screen-interference currents Ⴠ Low mutual capacitance Ⴠ Meets EMC requirements according to EN55011 and DINVDE0875 part11 Ⴠ Low coupling resistance for high electromagnetic compatibility Ⴠ UV-resitant Ⴠ Outdoor application Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Ⴠ This screened motor supply cable with low mutual capacitance of the single cores because of the special PE core insulation and low screen capacitance enable a low-loss transmission of the power compared to PVC-sheathed connecting cables Ⴠ Due to the optimal screening an interference-free operation of frequency converters is obtained   Application This TOPFLEX®-EMC-UV-2YSLC11Y-J UL/CSA motor power supply cable with PURouther sheathfor the frequency converters assures electromagnetic compatibility in plants and buildings, facilities with units and operating equipment where the fields of electromagnetic interference might cause adverse effects on the surroundings. As a supply and connecting cable for medium mechanical stresses in fixed installations and forced movements in dry, moist and wet environments and for outdoor applications.Used in the automotive and food industries, environmental technology, packaging industry, machine tools. Handling equipment, for SIMOVERT drives, they are particularly suitable for use with industrial pumps, ventilators, conveyor belts and air-conditioning installations and similar applications. Installation in hazardous areas. EMC = Electromagnetic compatibility The screen must be connected at both ends and ensure lare-area contact over the entire cable circumference for compliance with the functional interference requirements of EN55011. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 22389 22390 22391 22392 22393 4G1,5 4G2,5 4G4 4G6 4G10 Outer Ø Mutual capacitance approx. mm Core / Core Core / Screen approx. nF / approx. nF / km km 10,3 70 110 12,3 80 130 13,9 90 150 15,3 90 150 19,5 120 200 Coupling resistance at 1 MHz at 30 MHz Ohm/km Ohm/km Power ratings **) with 3 loaded cores inAmperes Cop. weight kg/km Weight approx. kg/km 18 11 6 7 21 31 40 52 72 95,0 150,0 235,0 320,0 533,0 230,0 300,0 485,0 630,0 860,0 210 210 150 180 AWG-No. 16 14 14 14 14  Continuation Ⴇ N 145 TOPFLEX®-EMV-UV 2YSLC11Y-J UL/CSA Motor supply cable 0,6/1kV, for power supply connections to frequency converters, double screened, meter marking.  Part no. No.cores x cross-sec. mm² 22394 22395 22396 22397 22398 22399 22566 22567 22568 4G16 4G25 4G35 4G50 4G70 4G95 4G120 4G150 4G185 Outer Ø Mutual capacitance approx. mm Core / Core Core / Screen approx. nF / approx. nF / km km 23,3 140 230 27,4 120 211 30,3 150 260 35,5 190 320 40,2 190 320 44,5 250 410 50,3 56,1 58,0 Coupling resistance at 1 MHz at 30 MHz Ohm/km Ohm/km Power ratings **) with 3 loaded cores inAmperes Cop. weight kg/km Weight approx. kg/km 9 4 3 2 2 1 96 127 158 192 246 295 344 395 450 789,0 1180,0 1662,0 2345,0 3196,0 4316,0 5435,0 6394,0 7639,0 1290,0 1800,0 2610,0 2950,0 3950,0 5300,0 6600,0 7040,0 8380,0 190 95 85 40 45 50 AWG-No. 14 14 14 14 14 14 14 14 14  Dimensions and specifications may be changed without prior notice. (RD01) Cable Glands Cable glands for standard applications Plastic Glands Cable Glands of Brass Accessories Cable glands for special application conditions for electromagnetic compatibility EMC for rugged applications and special chemical resistance for high temperature use for explosive areas for special mounting conditions for special pressure conditions N You can find cable glands in our catalogue Cable Accessories. Request it now at www.helukabel.de N 146 TOPFLEX® MOTOR EMV 1/1 triple-screened, low capacitance, 80°C 600V high flexible motor supply cable, meter marking   Technical data Cable structure Properties Ⴠ Special PUR motor power supply cable for frequency converter to ULAWM Style20234 and CSAAWM based on DINVDE0250 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage acc. to UL 1000 V acc. to VDE U0/U 0,6/1 kV Ⴠ A.c. test voltage, 50 Hz 3000 V Ⴠ Mutual capacitance at 4 kHz, depending on conductor cross-section core/core 70-250 nF/km core/screen 110-410 nF/km Ⴠ Insulation resistance min. 200 MOhm x km Ⴠ Minimum bending radius fixed installation, for outside ø to 12 mm = 5x cable ø 12 to 20 mm = 7,5x cable ø > 20 mm = 10x cable ø free-movement, for outside ø to 12 mm = 10x cable ø 12 to 20 mm = 15x cable ø > 20 mm = 20x cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire in acc. with DINVDE0295 cl.5 and IEC60228 cl.5 Ⴠ Special polyethylene (PE) core insulation Ⴠ Core colours black, brown, grey Ⴠ Green-yellow earth core Ⴠ Cores stranded in layers Ⴠ Screen of semi-conductive fleece, aluminium-coated polyester film and tinned copper braiding, coverage approx. 85% Ⴠ PUR outer sheath Ⴠ Sheath colour orange (RAL 2003) according to DESINA® Ⴠ with meter marking, change-over in 2011  Ⴠ PUR outer sheath: low adhesion, flame retardant, extremely abrasion resistant, halogen-free, resistant to UV, oil, hydrolysis and microbial attack Ⴠ PUR sheath: self-extinguishing and flame retardant according to VDE0482-332-1-2, DIN EN60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) Ⴠ This screened motor power supply cable, with low mutual capacitance because of the special PE core insulation, enables low-loss transmission of power compared to PVC-sheathed power supply cables Ⴠ The optimal triple screening enables interference-free operation of frequency converters Ⴠ Optimum compliance with requirements for electromagnetic compatibility (EMC) due to the triple screening Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Tests Ⴠ Low mutual capacitance: tested acc. to DINVDE0472 part504, test methodB  Application This TOPFLEX® MOTOR EMV 1/1 two-approvals, triple-screened motor power supply cable for frequency converters provides outstanding EMC in machines and systems. Suitable as a supply and connecting cable for high mechanical stresses, in fixed installations and occasional free movements in dry, moist and wet environments, as well as outdoors. Areas of application include machine tools, processing and manufacturing machinery, machining centres, industrial robots, transfer lines, handling equipment, etc. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 78377 78378 78379 78380 78381 78382 701308 78383 78384 78385 78386 78387 78388 78479 4G1,5 4G2,5 4G4 4G6 4G10 4G16 4G25 4G35 4G50 4G70 4G95 4G120 4G150 4G185 Outer Ø Mutual capacitance approx. mm Core / Core Core / Screen approx. nF / approx. nF / km km 11,5 70 110 13,5 80 130 15,8 90 150 17,8 90 150 21,6 120 200 25,4 120 210 31,0 140 230 33,0 150 260 39,0 190 320 45,0 190 320 50,1 250 410 54,2 61,3 64,2  Dimensions and specifications may be changed without prior notice. N 147 Coupling resistance at 1 MHz at 30 MHz Ohm/km Ohm/km 18 11 6 7 9 4 3 2 2 1 210 210 150 180 190 95 85 40 45 50 Power ratings **) with 3 loaded cores inAmperes Cop. weight kg/km Weight approx. kg/km 18 26 34 44 61 82 108 135 168 207 250 292 335 382 95,0 150,0 235,0 320,0 533,0 789,0 1180,0 1662,0 2345,0 3196,0 4316,0 5435,0 6394,0 7639,0 230,0 300,0 485,0 630,0 860,0 1290,0 1800,0 2610,0 2950,0 3950,0 5300,0 6600,0 7040,0 8380,0 AWG-No. 16 14 12 10 8 6 4 2 1 2/0 3/0 4/0 300 kcmil 350 kcmil TOPFLEX®-MOTOR-EMV 3/3 triple-screened, low capacitance, 80°C, 600V, PUR flexible motor supply cable, meter marking   Technical data Cable structure Properties Ⴠ Special PUR motor power supply cable for frequency converter to ULAWM Style20234 and CSAAWM based on DINVDE0250 Ⴠ Temperature range flexing -30 °C to +80 °C fixed installation -40 °C to +80 °C Ⴠ Nominal voltage acc. to UL 1000 V acc. to VDE U0/U 0,6/1 kV Ⴠ A.c. test voltage, 50 Hz 3000 V Ⴠ Mutual capacitance at 4 kHz, depending on conductor cross-section core/core 70-250 nF/km core/screen 110-410 nF/km Ⴠ Insulation resistance min. 200 MOhm x km Ⴠ Minimum bending radius fixed installation, for outside ø to 12 mm = 5x cable ø >12 to 20 mm = 7,5x cable ø >20 mm = 10x cable ø free-movement, for outside ø to 12 mm = 10x cable ø >12 to 20 mm = 15x cable ø >20 mm = 20x cable ø Ⴠ Coupling resistance max. 250 Ohm/km Ⴠ Radiation resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire in acc. with DINVDE0295 cl.5 and IEC60228 cl.5 Ⴠ Special polyethylene (PE) core insulation Ⴠ Core colours black with imprint U1, V2, W3 Ⴠ Green-yellow earth core Ⴠ Cores stranded in layers Ⴠ Screen of semi-conductive fleece, aluminium-coated polyester film and tinned copper braiding, coverage approx. 85% Ⴠ PVC outer sheath Ⴠ Sheath colour orange (RAL 2003) according to DESINA® Ⴠ with meter marking, change-over in 2011  Ⴠ PUR outer sheath: low adhesion, flame retardant, extremely abrasion resistant, halogen-free, resistant to UV, oil, hydrolysis and microbial attack Ⴠ PUR sheath: self-extinguishing and flame retardant, test method B acc. to DINVDE0472 part804 and IEC60332-1 Ⴠ This screened motor power supply cable, with low mutual capacitance because of the special PE core insulation, enables low-loss transmission of power compared to PVC-sheathed power supply cables Ⴠ The optimal triple screening enables interference-free operation of frequency converters Ⴠ Optimum compliance with requirements for electromagnetic compatibility (EMC) due to the triple screening Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers Tests Ⴠ Low mutual capacitance: tested acc. to DINVDE0472 part504, test methodB Special features: Here the earth core cross-section is divided into thirds, which lie in the interstices between the power supply cores. Due to this symmetrical construction, the PE insulation and the triple screening, very low capacitance and inductance are achieved. EMC compatibility is considerably enhanced.   Note Ⴠ All cables are also available in JB with coloured cores according to VDE0295.  Application This TOPFLEX® MOTOR EMV 3/3 two-approvals, triple-screened motor power supply cable for frequency converters provides outstanding EMC in machines and systems. Suitable as a supply and connecting cable for high mechanical stresses, in fixed installations and occasional free movements in dry, moist and wet environments, as well as outdoors. Areas of application include machine tools, processing and manufacturing machinery, machining centres, industrial robots, transfer lines, handling equipment, etc. By dividing the earth core into thirds and dividing it evenly in the interstices between the power supply cores, a symmetrical structure has been achieved. This results in improved EMC, capacitance and inductance compared to the 4-core version. EMC = Electromagnetic compatibillity To optimise the EMC features we recommend a large round contact of the copper braiding on both ends. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.  Continuation Ⴇ N 148 N TOPFLEX®-MOTOR-EMV 3/3 triple-screened, low capacitance, 80°C, 600V, PUR flexible motor supply cable, meter marking  Part no. 78614 78615 78616 78617 78618 78619 78620 78621 78622 78623 78624 78625 78626 No.cores x cross-sec. mm² 3 x 1,5 + 3G0,25 3 x 2,5 + 3G0,5 3 x 4 + 3G0,75 3 x 6 + 3G1,0 3 x 10 + 3G1,5 3 x 16 + 3G2,5 3 x 25 + 3G4,0 3 x 35 + 3G6,0 3 x 50 + 3G16,0 3 x 70 + 3G10,0 3 x 95 + 3G16,0 3 x 120 + 3G16,0 3 x 150 + 3G25,0 Outer Ø approx. mm 10,4 12,1 13,9 15,5 19,5 22,5 28,6 29,6 35,7 43,0 47,0 52,0 58,0 Coupling resistance at 1 MHz at 30 MHz Ohm/km Ohm/km 18 11 6 7 9 4 3 2 2 1 210 210 150 180 190 95 85 40 45 50 Power ratings **) with 3 loaded cores inAmperes 18 26 34 44 61 82 108 135 168 207 250 292 335  Dimensions and specifications may be changed without prior notice. Conduits Corrugated tubes for standard applications for lager sizes scissile corrugated tubes conduit glands High flexible conduits plastic conduits with spiral spring metal conduits conduits glands Conduit for heavy mechanical duty metal conduits with plastic sheat plastic conduits conduits glands for metal conduits You can find conduits in our catalogue Cable Accessories. Request it now at www.helukabel.de N 149 Cop. weight kg/km 100,0 160,0 245,0 335,0 750,0 820,0 1180,0 1700,0 2400,0 3300,0 4500,0 5500,0 6260,0 Weight approx. kg/km 150,0 240,0 345,0 460,0 840,0 930,0 1425,0 1900,0 2650,0 4400,0 5300,0 6300,0 7200,0 AWG-No. 16 14 12 10 8 6 4 2 1 2/0 3/0 4/0 300 kcmil TOPFLEX®-MOTOR-EMV 103 low capacitance power supply cable 0,6/1kV, increased ampacity, meter marking   Technical data Cable structure Properties Ⴠ Special motor power supply cable for frequency converters according to UL-AWM style 21179 Ⴠ Temperature range flexing -5 °C to +70 °C fixed installation -40 °C to +80 °C Ⴠ Permissible operating temperature at conductor +90 °C Ⴠ Nominal voltage U0/U 600/1000 V Ⴠ Max. operating voltage A.C. and 3-phase 700/1200 V DC operation 900/1800 V Ⴠ Test voltage 2500 V Ⴠ Insulation resistance min. 200 MOhm x km Ⴠ Coupling resistance according to different cross-sections max. 250 Ohm/km Ⴠ Mutual capacitance according to different cross-sections core/core 70 to 250 nF/km core/screen 110 to 410 nF/km Ⴠ Minimum bending radius fixed installation for outer ø: up to 12 mm: approx. 5x cable ø >12 to 20 mm: approx. 7,5x cable ø >20 mm: approx. 10x cable ø free-movement for outer ø: up to 12 mm: approx. 10x cable ø >12 to 20 mm: approx. 15x cable ø >20 mm: approx. 20x cable ø Ⴠ Radiation-resistance up to 80x106 cJ/kg (up to 80 Mrad) Ⴠ Bare copper, fine wire conductor to DINVDE0295 cl.5, BS6360 cl.5 or IEC60228 cl.5 Ⴠ Special-Polymer core insulation Ⴠ Cores coded to DIN VDE 0293-308 Ⴠ Core colours: above 5 cores color coded 7 cores black with numbering Ⴠ Green-yellow earth-core Ⴠ Cores stranded in concentric layers Ⴠ 1. screening with special aluminium film Ⴠ 2. screening with copper braiding, tinned copper, coverage approx. 80% Ⴠ Special PVC outer sheath, orange (RAL2003) Ⴠ with meter marking, change-over in 2011  Ⴠ Behavior in fire: Test according to DINVDE0482 / IEC60332-1 (equivalent to DINVDE0472 part804) test typeB) Ⴠ Low mutual capacitance, to DINVDE0472 part504, test methodB Ⴠ Features Special-Polymer-insulation secures a lower dielectric loss, double potential strength, high longevity and low screen-interference currents to include increased current carrying capacity Ⴠ Meets EMC requirements according to EN55011 and DINVDE0875 part11 Ⴠ Low coupling resistance for high electromagnetic compatibility Ⴠ This screened motor supply cable with low mutual capacitance of the single cores because of the special Polymer core insulation and low screen capacitance enable a low-loss transmission of the power compared to PVC-sheathed connecting cables Ⴠ Due to the optimal screening an interference-free operation of frequency converters is obtained Ⴠ Design according to the requirements of VdS 3501:2006-04 Ⴠ The materials used in manufacture are cadmium-free and contain no silicone and free from substances harmful to the wetting properties of lacquers  Application This UL/CSA motor power supply cable for the frequency converters assures electromagnetic compatibility in plants and buildings, facilities with units and operating equipment where the fields of electromagnetic interference might cause adverse effects on the surroundings. As a supply and connecting cable for medium mechanical stresses in fixed installations and forced movements in dry, moist and wet environments. Used in the automotive and food industries, environmental technology, packaging industry, machine tools. Handling equipment, for SIMOVERT drives, they are particularly suitable for use with industrial pumps, ventilators, conveyor belts and air-conditioning installations and similar applications. Installation in hazardous areas. EMC = Electromagnetic compatibility The screen must be connected at both ends and ensure lare-area contact over the entire cable circumference for compliance with the functional interference requirements of EN 55011. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.   Part no. No.cores x cross-sec. mm² 22689 3G1,5 22690 4G1,5 22691 5G1,5 22692 7G1,5 22693 3G2,5 22694 4G2,5 22695 5G2,5 22696 7G2,5 22697 4G4  Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km 9,4 72,0 200,0 10,4 95,0 230,0 11,2 117,0 258,0 13,2 148,0 281,0 11,2 137,0 270,0 12,5 150,0 300,0 13,5 200,0 352,0 16,0 230,0 473,0 14,2 235,0 485,0 AWG-No. 16 16 16 16 16 16 16 16 16  Part no. No.cores x cross-sec. mm² 22698 5G4 22699 7G4 22700 4G6 22701 5G6 22702 7G6 22703 4G10 22704 5G10 22705 4G16 22706 4G25 Outer Ø Cop. Weight approx. weight approx. mm kg/km kg/km 15,4 321,0 567,0 18,2 352,0 603,0 15,2 320,0 633,0 16,8 439,0 679,0 20,0 501,0 771,0 19,5 533,0 860,0 21,6 711,0 1029,0 23,1 789,0 1290,0 27,1 1236,0 1862,0 AWG-No. 16 16 16 16 16 16 16 16 16  Dimensions and specifications may be changed without prior notice. (RN07) N 150 N VERTEILERFLEX two-approvals sensor actuator and distributor cables PVC, PUR, PVC/PUR   Technical data Cable structure Properties Ⴠ Special PVC or PUR sheath acc. to UL Style 2464 for PVC, or UL Style 20233 for PUR Ⴠ Temperature range flexing -5 °C to +80 °C fixed installation -30 °C to +80 °C Ⴠ Nominal voltage 300/500 V Ⴠ A.c. test voltage, 50 Hz to 0,25 mm2 1200 V from 0,34 mm2 2000 V Ⴠ Minimum bending radius Sensorflex Two approvals PVC approx. 7,5x cable ø Sensorflex Two approvals PUR approx. 15x cable ø PVC cables Ⴠ Bare copper, fine wire in acc. with DINVDE0295 cl.5 or IEC60228 cl.5 Ⴠ PVC core insulation, core colours see below Ⴠ Special PVC PUR cables Ⴠ Bare copper, ultra-fine wire conductors acc. to DINVDE0295 cl.6 and/or IEC60228 cl.6 Ⴠ PVC core insulation Ⴠ Core colours see below Ⴠ PUR sheath Part Nos. 79907, 75642, 79850 Ⴠ Construction like SENSORFLEX two-approvals, except Ⴠ with polypropylene core insulation  PVC cables Ⴠ Extensively oil resistant. Chemical Resistance - see table Technical Informations Ⴠ PVC self-extinguishing and flame retardant according to VDE 0482-332-1-2, DIN EN 60332-1-2/ IEC60332-1 (equivalent DINVDE0472 part804 test methodB) PUR cables Ⴠ Low adhesion, extremely abrasion resistant, resistant to hydrolysis and microbial attack Special feature Ⴠ The cables with the highly flexible stranded conductor, cl. 6, are suitable for drag chain applications Ⴠ The types with PVC/PUR sheath material have a PVC inner sheath, with a PUR sheath applied over it by means of coextrusion  Note Ⴠ All additional cross-sections, also with UL/CSA approval, are available on request.  Application For decentralised installation and control technology. These cables are used in connector systems for sensors and actuators. In combination with injected circular connectors and installed actuator-sensor boxes, they constitute an important connecting element between the periphery and the PLC in production systems. The assembled cables offer attractive opportunities for reducing costs, not only in the field of automation technology, but also in the entire manufacturing industry. While previously it was necessary to carry out time-consuming wiring of switchgear cabinets and machines, now field bus technology has made it possible to move the periphery interfaces from the switchgear cabinets to the machines and systems. Moving the I/O points to the system periphery enables significant reductions in installation costs. = The product is conformed with the EC Low-Voltage Directive 2006/95/EG.  SENSORFLEX 2-APPROVALS Part no. 78284 79907 78286 76345 76347 76348 76349 79850 78287 78288 76351 73571 75642 Jacket colour Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Black RAL9005 Cable structure No.cores x cross-sec. mm² 3x0,25 4x0,25 6x0,25 3x0,34 4x0,34 5G0,34 5G0,34 5G0,34 5G0,34 3G0,75 3G0,75 3G0,75 3G0,75 Jacket material Core colours PUR PUR PVC PVC PVC PVC/PUR PVC/PUR PUR PVC/PUR PUR PVC PVC PUR brown, blue, black brown, blue, black, white brown, blue, black, white, grey, pink brown, blue, black brown, blue, black, white brown, blue, black, white, green-yellow brown, blue, black, white, green-yellow brown, blue, black, white, green-yellow JZ, black with numbering + greenyellow JZ, black with numbering + greenyellow brown, blue, green-yellow JZ, black with numbering + greenyellow JZ, black with numbering + greenyellow Fine wire X X X X X High flex ** X X X X X X X X Outer Ø approx. mm 4,4 4,7 5,2 4,9 5,2 5,9 5,9 5,9 5,9 5,9 6,7 6,7 5,9 Cop. weight kg/km 7,2 9,6 14,4 9,8 13,1 16,4 16,4 16,4 16,4 21,6 28,8 21,6 21,6 Weight approx. kg/km 18,0 18,0 36,0 30,0 43,0 54,0 54,0 54,0 54,0 58,0 88,0 58,0 58,0 AWG-No. 24 24 24 22 22 22 22 22 22 18 18 18 18  Continuation Ⴇ N 151 VERTEILERFLEX two-approvals sensor actuator and distributor cables PVC, PUR, PVC/PUR SENSORFLEX 2-APPROVALS Part no. 74551 78289 78290 77352 76350 78291 73587 Jacket colour Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Black RAL9005 Grey RAL 7001 Grey RAL 7001 Grey RAL 7001 Cable structure No.cores x cross-sec. mm² 4G0,75 4G0,75 2x1 2x1 11G1 2x1,5 3G1,5 Jacket material Core colours PUR PVC/PUR PVC PVC PVC/PUR PVC PVC JZ, black with numbering + greenyellow JZ, black with numbering + greenyellow black with number 1-2 black with number 1-2 black with number 1-8, bn, bu, gn, ye brown, blue brown, blue, green-yellow Jacket material Core colours PVC/PUR brown, blue, green-yellow, white, green, yellow, grey brown, blue, green-yellow, white, green, yellow, grey, pink, red white, red-blue, green, wh-green, yellow, brown-green, gy-pink, brown, blue, green-yellow brown, blue, green-yellow, white, green, yellow, grey, pink, red, black, violet brown, blue, gnye, gnwh, white, rdbu, green, whgn, yellow, bngn, grey, whye, pink, yebn, red bn, bu, gnye, gnwh, wh, rdbu, gn, whgn, ye, bngn, gy, whye, pk, yebn, rd, whgy, bk, gybn, vt Fine wire X X X X X X High flex ** X Outer Ø approx. mm 6,9 7,0 7,2 7,2 12,0 6,8 6,9 Cop. weight kg/km 29,0 29,0 19,2 19,2 105,6 29,0 44,0 Weight approx. kg/km 66,0 66,0 56,0 56,0 225,0 75,0 94,0 Outer Ø approx. mm 8,7 Cop. weight kg/km 35,0 Weight approx. kg/km 82,0 AWG-No. 18 18 17 17 17 16 16  Verteilerflex 2-APPROVALS Part no. Jacket colour Cable structure No.cores x cross-sec. mm² 4G0,34 76352 Grey RAL 7001 76353 Grey RAL 7001 6G0,34 PVC/PUR 75614 Grey RAL 7001 8G0,34 PUR 76354 Grey RAL 7001 8G0,34 PVC/PUR 76355 Grey RAL 7001 12G0,34 PVC/PUR 76356 Grey RAL 7001 16G0,34 PVC/PUR Fine wire High flex ** X X AWG-No. 22 9,1 42,0 106,0 22 10,0 65,0 143,0 22 X 9,1 48,0 110,0 22 X 10,3 61,0 138,0 22 X 10,5 74,0 170,0 22 X  Dimensions and specifications may be changed without prior notice. N N 152 HELUKABEL BS 5308-1 HELUKABEL BS 5308-2 HELUKABEL BS 5467 HELUKABEL BS 6724 Photo: HELUKABEL® Cables to British Standard N 153 HELUKABEL BS 5308 Part 1 Instruments cable, core insulation PE or XLPE   Technical data Cable structure Note Ⴠ Instrument cable acc. to British Standard 5308 Part 1 Ⴠ Temperature range fixed installation -20 °C to +65 °C Ⴠ Nominal voltage Uo/U 300/500V Ⴠ Minimum bending radius fixed installation 5x external ø (Type 1) 6x external ø (Types 2+3) Ⴠ Copper conductor, single-, multiple-, or fine-wire acc. to BS 6360 Ⴠ Conductor cross-sections from 0,5 mm² to 1,5 mm² Ⴠ Core insulation - Polyethylene acc. to BS 6234 Type 03 or - XLPE (cross-linked polyethylene for LSZH cable) Ⴠ Cores stranded in pairs with optimal lay-length, Lay-length smaller than 100 mm Ⴠ Number of pairs: 1,2,5,10,15,20,30,50 Ⴠ Pairs individually not screened or screened Ⴠ Pairs stranded in layers Ⴠ Wrapping with aluminium/polyester foil, on request Ⴠ Type 1 Flame retardant PVC outer sheath or LSZH Ⴠ Type 2 Extruded polyethylene inner sheath, steel wire armouring Flame retardant PVC outer sheath or LSZH Ⴠ Type 3 PVC inner sheath, steel wire armouring, PVC outer sheath Ⴠ Sheath colour black or blue As a result of a wide range of cables and wires according to British Standard, you can find following only a small selection of types. For request about British Standard cables please contact us under Ph. 004971509209-786 Fax 004971509209-148  Application N As measurement and control cables in power plants and industrial plants, and in the petrochemical industry. Example BS 5308 P1 T1 CU / PE / CAM / PVC = Overall screening, jacket PVC BS 5308 P1 T2 CU / XLPE / IAM / CAM / LSZH / SWA / LSZH = Pair screened, Overall screening, galvanic round steel wire, halogen free  Dimensions and specifications may be changed without prior notice. N 154 HELUKABEL BS 5308 Part 2 Instruments cable, core insulation PVC   Technical data Cable structure Note Ⴠ Instrument cable acc. to British Standard 5308 Part 2 Ⴠ Temperature range fixed installation -20 °C to +65 °C Ⴠ Nominal voltage U0/U 300/500V Ⴠ Minimum bending radius fixed installation 5x external ø (Type 1) 6x external ø (Types 2) Ⴠ Copper conductor, single-, multiple-, or fine-wire acc. to BS 6360 Ⴠ Conductor cross-sections from 0,5 mm² to 1,5 mm² Ⴠ Core insulation - PVC acc. to BS 6746 Ⴠ Cores stranded in pairs with optimal lay-length, Lay-length smaller than 100mm Ⴠ Number of pairs: 1,2,5,10,20,30,50 Ⴠ Pairs individually not screened or screened Ⴠ Pairs stranded in layers Ⴠ Wrapping with aluminium/polyester foil, on request Ⴠ Type 1 Flame retardant PVC outer sheath Ⴠ Type 2 Extruded PVC inner sheath, steel wire armouring Flame retardant PVC outer sheath Ⴠ Sheath colour black or blue As a result of a wide range of cables and wires according to British Standard, you can find following only a small selection of types. For request about British Standard cables please contact us under Ph. 004971509209-786 Fax 004971509209-148  Application As measurement and control cables in power plants and industrial plants, and in the petrochemical industry. Example BS 5308 P2 T2 CU / PVC / CAM / PVC / SWA / PVC = Overall screening, steel wire armouring  Dimensions and specifications may be changed without prior notice. N 155 HELUKABEL BS 5467 High voltage cable 0,6/1kV, armoured, sheath PVC   Technical data Cable structure Properties Ⴠ Special power cable acc. to British Standard 5467 Ⴠ Temperature range flexing 0 °C to +90 °C fixed installation -15 °C to +90 °C Ⴠ Nominal voltage U0/U 0,6/1 kV Ⴠ Minimum bending radius fixed installation 6x external ø Ⴠ Bare copper conductor acc. to BS 6360 cl.2 Ⴠ Core insulation of cross-linked polyethylene Ⴠ Core identification 1-core - brown 2-core - brown, blue 3-core - brown, blue, grey 4-core - brown, black, grey, blue 5-core and up with numbering Ⴠ Cores stranded layers Ⴠ PVC-Inner sheath Ⴠ Amouring of galvanized steel wire Ⴠ PVC-Outer sheath Ⴠ Sheath colour black Ⴠ Reaction to fire tested acc. to IEC 60332-1, BS 4066-1  Note As a result of a wide range of cables and wires according to British Standard, you can find following only a small selection of types. For request about British Standard cables please contact us under Ph. 004971509209-786 Fax 004971509209-148  Application As a control and power cable in industrial enviroments. Thanks to the amouring of galvanized steel wire, can be used anywhere that a high level of mechanical protection is required. Suitable for use outdoors and in the earth. Example BS 5467 CU / XLPE / PVC / AWA / PVC = Singlecore BS 5467 CU / XLPE / PVC / SWA / PVC = Multicore  Dimensions and specifications may be changed without prior notice. N N 156 HELUKABEL BS 6724 High voltage cable 0,6/1kV, armoured, halogen-free   Technical data Cable structure Properties Ⴠ Special power cable acc. to British Standard 6724 Ⴠ Temperature range flexing 0 °C to +90 °C fixed installation -20 °C to +90 °C Ⴠ Permissible operating temperature at conductor +90 °C Ⴠ Nominal voltage U0/U 0,6/1 kV Ⴠ Minimum bending radius fixed installation 6x external ø Ⴠ Bare copper conductor acc. to BS 6360 cl.2 Ⴠ Core insulation of cross-linked polyethylene Ⴠ Core identification 1-core - brown 2-core - brown, blue 3-core - brown, black, grey 4-core - brown, black, grey, blue 5-core and up with numbering Ⴠ Cores stranded layers Ⴠ Inner sheath LSHF mix Ⴠ Amouring of galvanized steel wire Ⴠ Outer sheath LSHF mix Ⴠ Sheath colour black Ⴠ Reaction to fire tested acc. to IEC 60332-3, BS 4066-1  Note As a result of a wide range of cables and wires according to British Standard, you can find following only a small selection of types. For request about British Standard cables please contact us under Ph. 004971509209-786 Fax 004971509209-148  Application Unlike power cables acc. to BS 5467, these are LSHF (Low Smoke Halogen Free). Used anywhere where in case of fire damage to human life and material assets must be prevented, e.g. in industrial plants, airports, underground railways and tunnels. Example BS 5467 CU / XLPE / LSZH / AWA / LSZH = Singelcore BS 5467 CU / XLPE / LSZH / SWA / LSZH = Multicore  Dimensions and specifications may be changed without prior notice. N 157