Cadet 6' X 36" Whirlpool And Bathing Pool ❏

Transcript

CADET® 6' x 36" WHIRLPOOL AND BATHING POOL HIGH GLOSS CADET® 6' x 36" WHIRLPOOL AND BATHING POOL ❏ 2773.018W Whirlpool • Acrylic with fiberglass reinforcement • Pre-leveled tub bottom • Form-fitted back rest • Molded-in armrests with elbow supports • Dual accessory deck area • Single speed pump/motor • Factory installed power cord with plug • Eight-jet system featuring: - Two multi-directional and flow adjustable Acumax™ high output jets - Six multi-directional and flow adjustable Acumax body massage jets including two in the lumbar area • Side-mounted air switch On/Off • Two silent air volume controls • Quick Connect Safe-T-Heater connection system ❏ 2773.018WC EverClean® Whirlpool: • Same as 2773.018W except with the EverClean System ❏ 2773.002 Bathing Pool only Nominal Dimensions: 1829 x 908 x 502mm (72" x 35-3/4" x 19-3/4") Compliance Certifications Meets or Exceeds the Following Specifications: • Underwriters Laboratories - Hydromassage Bathtubs UL 1795 • ASME A112.19.7M for Whirlpool Appliances • ANSI Z124.1 for Plastic Bathtubs • ASTM E162 for Flammability • NFPA 258 for Smoke Density American Standard whirlpools and air baths with EverClean® incorporate a safe and effective silver-ion antimicrobial additive right into the circulation piping to protect the pipes from mold, mildew, algae and fungus that could cause deterioration or staining of the pipes. Required Components (Specified finish): ❏ Color: ❏ Bath Filler ❏ Universal Bath Drain: 1583.470 ❏ Deep Soak ® Bathtub Drain (Bathing Pool only)**: 1640.305 Optional Components: ❏ Safe-T-Heater*: 9075.120 ❏ 6 Foot Apron: 9272.018 (specify color) ❏ Universal Tile Bead Kit: 751755-100 ❏ Grab Bar Kit: 9822.200-two per kit (specify finish) For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide. * NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature. ** NOTE: Deep Soak Bath Drain provides an additional 2" of water depth for a more luxurious bath. SEE REVERSE FOR PRODUCT DIMENSIONS AND SPECIFICATIONS © 2011 AS America Inc. H75 Revised 5/11 CADET® 6' x 36" WHIRLPOOL AND BATHING POOL HIGH GLOSS 9" (229mm) 3/4" (19mm) PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS 72" (1829mm) 12" RECOMMENDED FITTING LOCATION (305mm) 2-1/2" x 13" (64 X 330mm) FOR PIER OR ISLAND INSTALLATIONS ONLY FINISHED WALL 9" (229mm) 72" (1829mm) 12" (305mm) RECOMMENDED FITTING LOCATION 2-1/2" x 13" (64 X 330mm) FOR PIER OR ISLAND INSTALLATIONS ONLY 3/4" (19mm) SEE FITTING SPECS FOR DIMENSIONS FINISHED WALL 35-3/4" (908mm) 9" (229mm) 9" (229mm) 17-7/8" (454mm) (2) AIR VALVES 2-1/4" (57mm) (8) JETS C/L OF DRAIN OPTIONAL TO FINISHED FLOOR USUALLY BETWEEN 65 " & 78 " (1651 & 1981mm) C/L OF OVERFLOW 2-3/4" (70mm) 35-3/4" (908mm) PUMP CUTOUT IN FLOOR FOR DRAIN C/L OF SHOWER ARM C/L OF VALVES 1-1/2" (38mm) 12" (305mm) 1-1/2" (38mm) C/L OF SPOUT 12" (305mm) 4" (102mm) LEVELING STRINGER NOT FOR SUPPORT 19-3/4" (502mm) 1-1/2" N.P.T.M. THREADS 1-1/2" O.D.TAILPIECE 18-1/4" (464mm) ROUGH FLOOR 18-1/4" (464mm) ROUGH FLOOR INTEGRAL SUPPORT FEET 2-3/4" (70mm) 1-1/2" N.P.T.M. THREADS 1-1/2" O.D.TAILPIECE 4-5/8" (117mm) GENERAL SPECIFICATIONS FOR 2773 WHIRLPOOL 2-3/4" (70mm) 4-5/8" (117mm) GENERAL SPECIFICATIONS FOR 2773 BATHING POOL INSTALLED SIZE 72 x 35-3/4 x 19-3/4 In.(1829 x 908 x 502mm) 101 Lbs. (45 Kg.) WEIGHT 751 Lbs. (341 Kg) WEIGHT w/WATER 78 Gal. (296 L.) GAL. TO OVERFLOW 64 Gal. (243 L.) MIN. OPERATING GAL. 23 x 49 In. (584 mm x 1245 mm) BATHING WELL AT SUMP 65 x 29 In. (1651 x 737 mm) BATHING WELL AT RIM 13-1/2 In. (343 mm) WATER DEPTH TO OVERFLOW 40 Lbs./Sq. Ft. (190 Kgs/Sq. m.) FLOOR LOADING (PROJECTED AREA) 23.8 PTS. CUBE (FT 3 ) 48.3 INSTALLED SIZE 72 x 35-3/4 x 19-3/4 In. (1829mm x 908 mm x 502mm) 76 Lbs. (34 Kg.) WEIGHT 725 Lbs. (326 Kg.) WEIGHT w/WATER 78 Gal. (296 L.) GAL. TO OVERFLOW 23 x 49 In. (584 mm x 1245 mm) BATHING WELL AT SUMP 65 x 29 In. (1651 x 737 mm) BATHING WELL AT RIM 13-1/2 In. (343 mm) WATER DEPTH TO OVERFLOW 38 Lbs./Sq. Ft. (183 Kgs/Sq. m.) FLOOR LOADING (PROJECTED AREA) PTS. 23.8 CUBE (FT 3 ) 48.3 WHIRLPOOL ELECTRICAL SPECIFICATIONS PUMP C/L OF VALVES 2-3/4" (70mm) LEVELING STRINGER NOT FOR SUPPORT 4" (102mm) OUTLINE OF CUTOUT ALT. FITTING 70-1/2" X 34-1/4" LOCATION (1791 x 870mm) C/L OF SHOWER ARM 2-1/4" (57mm) C/L OF DRAIN OPTIONAL TO FINISHED FLOOR USUALLY BETWEEN 65 " & 78 " (1651 & 1981mm) C/L OF OVERFLOW SAFE-T-HEATER REMOVABLE BLANK C/L OF SPOUT 19-3/4" (502mm) INTEGRAL SUPPORT FEET C/L OF SUPPLIES OUTLINE OF CUTOUT 70-1/2" X 34-1/4" (1791 x 870mm) ALT. FITTING LOCATION #1 CUTOUT IN FLOOR FOR DRAIN 17-7/8" (454mm) 120V., 60 HZ, 15A GFCI NOTES: BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS. ■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. OPTIONAL 3 WALL TILING BEAD. KIT AND APRON NO. 9272.018 AVAILABLE AND MUST BE ORDERED SEPARATELY. ● FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. ● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet. © 2011 AS America Inc. H76 Revised 5/11