Cadet Corner Whirlpool And Bathing Pool ❏

Transcript

CADET® CORNER WHIRLPOOL AND BATHING POOL HIGH GLOSS CADET® CORNER WHIRLPOOL AND BATHING POOL ❏ 2775.018W Whirlpool • Acrylic with fiberglass reinforcement • Pre-leveled tub bottom • Dual lumbar back rest positions • Molded-in arm rests with elbow supports • Accessory deck area • Pre-leveled tub bottom • Single speed pump/motor • Factory installed power cord with plug • Eight-jet system featuring: - Two multi-directional and flow adjustable Acumax™ high output jets - Six multi-directional and flow adjustable Acumax body massage jets including two in each lumbar area • Side-mounted air switch On/Off • Two silent air volume controls • Quick Connect Safe-T-Heater connection system ❏ 2775.018WC EverClean® Whirlpool: • Same as 2775.018W except with the EverClean System ❏ 2775.002 Bathing Pool only Nominal Dimensions: 2159 x 1524 x 502mm (85" x 60" x 19-3/4") Compliance Certifications Meets or Exceeds the Following Specifications: • Underwriters Laboratories - Hydromassage Bathtubs UL 1795 • ASME A112.19.7M for Whirlpool Appliances • ANSI Z124.1 for Plastic Bathtubs • ASTM E162 for Flammability • NFPA 258 for Smoke Density American Standard whirlpools and air baths with EverClean® incorporate a safe and effective silver-ion antimicrobial additive right into the circulation piping to protect the pipes from mold, mildew, algae and fungus that could cause deterioration or staining of the pipes. Required Components (Specified finish): ❏ Color: ❏ Bath Filler ❏ Universal Bath Drain: 1583.470 ❏ Deep Soak ® Bathtub Drain (Bathing Pool only)**: 1640.305 Optional Components: ❏ Safe-T-Heater*: 9075.120 ❏ Universal Tile Bead Kit: 751755-100 ❏ Grab Bar Kit: 9822.200-two per kit (specify finish) For color/finish availability and other faucet choices, please see the Product Selector and Pricing Guide. * NOTE: the Safe-T-Heater is designed to maintain water temperature during operation. It will not heat cold water to desired bathing temperature. ** NOTE: Deep Soak Bath Drain provides an additional 2" of water depth for a more luxurious bath. SEE REVERSE FOR PRODUCT DIMENSIONS AND SPECIFICATIONS © 2011 AS America Inc. H71 Revised 5/11 CADET® CORNER WHIRLPOOL AND BATHING POOL HIGH GLOSS " m) 60 4m 52 (1 42-1/2" (1080mm) 6-1/2" (165mm) 9" X 12" (229 X 305mm) CUTOUT IN FLOOR FOR DRAIN 42-1/2" (1080mm) 6-1/2" (165mm) 2-3/4" REF. (70mm) 2-3/4" REF. (70mm) PUMP C/L 9" X 12" (229 X 305mm) 42-3/8" CUTOUT IN (1076mm) FLOOR FOR DRAIN 60" (1524mm) 60" (1524mm) 42-3/8" (1076mm) RECOMMENDED FITTING LOCATION 2-1/2" X 13" (64 X 330mm) OUTLINE OF CUTOUT " m) 60 4m 52 (1 PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS RECOMMENDED FITTING LOCATION 2-1/2" X 13" (64 X 330mm) OUTLINE OF CUTOUT 11" (279mm) C/L 42-1/2" (1080 mm) C/L OF DRAIN OUTLET 279mm (11") C/L OF DRAIN OUTLET 85" (2159mm) 85" (2159mm) 38 mm REF. (1-1/2" ) C/L OF OVERFLOW 3" (76mm) LEVELING STRINGER NOT FOR SUPPORT 18-1/4" (464mm) INTEGRAL SUPPORT FEET ROUGH FLOOR 1-1/2" N.P.T.M. THREADS 1-1/2" O.D. TAILPIECE 2-3/4" (70mm) 76mm (3") LEVELING STRINGER NOT FOR SUPPORT 19-3/4" (502mm) 18-1/4" (464mm) INTEGRAL FEET ROUGH FLOOR 4-5/8" (117mm) GENERAL SPECIFICATIONS FOR 2775 WHIRLPOOL 19-3/4" (502mm) 1-1/2" N.P.T.M. THREADS 70mm (2-3/4") 1-1/2" O.D. TAILPIECE 4-5/8" (117mm) GENERAL SPECIFICATIONS FOR 2775 BATHING POOL INSTALLED SIZE 85 X 60 X 19-3/4In.(2159 X 1524 X 502mm) WEIGHT 130 Lbs. (59 Kg.) WEIGHT w/WATER 756 Lbs. (343 Kg.) GAL. TO OVERFLOW 75 Gal. (284 L.) MIN. OPERATING GAL. 60 Gal. (227 L.) BATHING WELL AT SUMP 32 X 32 In. (813 mm X 813 mm) BATHING WELL AT RIM 46 X 46 In. (1168 X 1168mm) WATER DEPTH TO OVERFLOW 14 In. (356 mm) FLOOR LOADING 34 Lbs./Sq. Ft. (115 Kgs/Sq. m.) (PROJECTED AREA) PTS. 41.7 CUBE (FT 3 ) 70.4 INSTALLED SIZE 85 X 60 X 19-3/4In. (2159mm X 1524 mm X 502mm) 105 Lbs. (48 Kg.) 730 Lbs. (328 Kg.) 75 Gal. (284 L.) WEIGHT WEIGHT w/WATER GAL. TO OVERFLOW 32 X 32 In. (813 mm X 813 mm) BATHING WELL AT SUMP 46 X 46 In. (1168 X 1168mm) BATHING WELL AT RIM 14 In. (356 mm) WATER DEPTH TO OVERFLOW 33 Lbs./Sq. Ft. (111 Kgs/Sq. m.) FLOOR LOADING (PROJECTED AREA) 41.7 PTS. 70.4 CUBE (FT 3 ) WHIRLPOOL ELECTRICAL SPECIFICATIONS PUMP C/L OF OVERFLOW 1-1/2" REF. (38 mm) 120 V, 60 HZ, 15A GFCI NOTES: BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS. ■ REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION. OPTIONAL 2 WALL TILING BEAD KIT AVAILABLE AND MUST BE ORDERED SEPARATELY. ● FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY. PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS. ● IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1/A112.19.7M. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet. © 2011 AS America Inc. H72 Revised 5/11