Camcorder And Accessory Supports

Transcript

Keene Electronics Catalogue 2005 Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk Camcorder and accessory supports Monopods, tripods & video heads Monopods Gamma 74 tripod Features 3 way pan & tilt fluid effect head, extendable panning handle, closed square section channel legs, spirit level, geared centre column with air damping, quick release head and integral carrying handle. Previously sold at £49.99, Keene price [G74] £34.99 Considerably easier to transport than a tripod, they are very good at taking the weight out of holding the camcorder and minimising camera shake. Very handy for work within crowds of people as they are less likely to get accidentally kicked or knocked, and they make it very easy to change position and reframe. Not much good though, if you want to leave your camcorder running and get yourself in the picture. Monopods - do I need to buy a head? Not necessarily — all monopods will screw directly into the tripod bush on your camcorder. It is really a matter of personal preference, some people prefer to leave it at that, others like to fit a tripod head onto the monopod itself. Bear in mind that you gain a fair degree of pan and tilt movement by just rotating and leaning the monopod anyway. MANFROTTO MONOPOD MN679 Three section Monopod featuring sure rubber grip, wrist carrying strap, quick action lever leg lock system with 45∞ flip, large 2.3" camera/head platform with plastic cover and dual 1/4-20" - 3/8" camera screw. (Replaces the 479 monopod) SPECIFICATIONS Material: Silver Aluminium Maximum Height: 162cm (63.8in) Minimum Height: 64 cm (25.2 in) Leg Sections: 3 Foot Type: Rubber Maximum Load Capacity: 22Lb Weight: 0.6 kg (1.3lb) [MN679] £29.99 MANFROTTO UNIVERSAL FOLDING MONOPOD BASE MN678 Turn your monopod into a self supporting stand! This unique accessory allows the addition of a base made of three foldable high strength steel legs for monopods 679, 680, 681 and old style 479, 434, 3249. The legs can be folded and stored inside the bottom section of the monopod ready for use in just a few seconds. SPECIFICATIONS Maximum Load Capacity: 13.9 kg (30.8lb) Weight: 0.4 kg (.9lb) [MN678] £34.99 Spare QR plate for Gamma 74 tripod [HP74QR] £7.99 Libec TH 650 tripod Extremely high quality tripod from the Libec factory. The fluid head has a counterbalanced mechanism which compensates for the camcorders weight and holds it steady at any tilt angle. The head also has a 65mm claw ball which allows for quick and easy head levelling regardless of leg position. The legs are made from three section oval pipe which gives good rigidity and also have a transport lock to hold them in place when on the move. Expensive, but the best things in life generally are. Height, fully extended 150cm, folded 75cm Weight 3.2kg [TH650] £169.99 Slik U8000 tripod Ultra smooth three way fluid effect head makes this tripod ideal for both photo and video use. Geared centre column with tension adjustment, oversize quick action leg lock, quick release head, champagne bronze colour – superb Slik quality at an affordable price. Height fully extended 150cm, folded 59gm. Weight (excl head) 1.5kg [U8000] £39.99 Self-standing PRO monopod MN682 Robust three-section aluminium professional monopod with the handy addition of three retractable legs. The 682 features a sure rubber grip, wrist carrying strap, quick action lever leg lock system with 45° flip, large 2.3" camera/head platform with plastic cover and dual 1/4"|3/8" camera screw. SPECIFICATIONS Material: silver aluminum Maximum height: 172 cm (67.7 in.) Minimum Height: 74 cm (29.1 in) Leg Sections: 3 • Foot type: rubber Maximum load capacity: 26.4 Ib Weight: 1.1 kg (2.4 lb) [MN682] £69.99 MN676 MONOPOD Slik Mini tripod Four section, lightweight monopod with rapid action extension locks. Suitable for compact and 35mm cameras and smaller min-DV camcorders. 1/4" camera fixing screw. SPECIFICATIONS Maximum height with extended centre column: 154 cm (60.7in) Closed length: 48 cm (18.9in) Maximum load capacity: 4.5 kg (10lb) Weight: 0.4 kg (0.9lb) Black finish [MN676B] £24.99 A beautifully made miniature tripod from Slik. Weighing just 320g it has two-section legs to provide a maximum operating height of 215mm. Ideal for table top work or can be used on car roofs, walls etc when out and about. Especially suited to compact cameras, digital cameras and Palmcorders this tripod really is small and light enough to be carried anywhere and should easily fit into most gadget bags [SMT] £19.99 62 Monopods, tripods video heads 62 Other camcorder supports 64 Accessory supports, brackets & shoes 65 Wall mounts for large displays 66 LIBEC DL2 TRIPOD DOLLY For use with TH650 tripod. Equipped with braking system and 75mm wheels. [TL2] £5.99 LIBEC TH950 TRIPOD A great new video specific tripod from Libec. The bigger brother to the very popular Heiwa TH650, this tripod has an advanced fluid head with a unique two position counterbalance making it ideal for use with front heavy cameras as well as normal cameras. The removable camera quick release plate is fitted with a sliding screw for fine adjustment and is made from extraordinarily strong magnesium alloy. A disc calliper is used for the tilt brake to hold the head rock steady and a 75mm ball head makes levelling smooth and steady. Suitable for:All consumer camcorders, Digital and 35mm still cameras, Sony PDX10 / PD170, Canon XM2 XL1s, JVC GY-DV300 Streamcorder, Panasonic AG-DVX100 Specifications: Camera load capacity: 4Kg Ball base: 75mm Weight: 3.75Kg Max height: 1.55m Min height: 0.75m Tripod section: 2 stage Supplied with soft carry case The normal price for this tripod is £199 plus VAT (£233.83). For a limited time we're offering it at £199 including VAT, saving you £34.83! Order Code [TH950] £199.00 Please note; if you intend to use this tripod with a Manfrotto LANC pan-handle such as the MN522 or 522C youíll need an adaptor to accommodate the variation in handle size: [MN522TH] £24.99 Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk Keene Electronics Catalogue 2005 Tripods and video heads (continued) Lightweight portable and sturdy the 055A is a classic tripod, ideal for 35mm, medium format and video camera applications. The extra long centre column is reversible, allowing the camera to be supported underneath the tripod, ideal for macro & nature work. 3 section quick lock (twist type) legs with triangular centre column which eliminates rotation even when not fully locked. Like all Manfrotto kit the build quality is superb. Specifications Closed height: 61cm Minimum working height: 56cm Fully extended height: 137cm Fully extended with fully extended centre column: 181cm Weight: 2.2Kg Max rec. weight 6Kg [MN055] Also available in black finish [MN055AB] Silky smooth genuine fluid action head. Quick release plate with secondary security pin, pans through 360°, tilts through 90° with pan and tilt locks. Ideal for all camcorders up to 4kg in weight. [MN128] £74.99 Option: Olive green version for use with the MN055 Nature tripod [MN128RCNAT] £74.99 Spare quick release plate for MN128 video heads [MN128QR] £9.99 £94.99 £99.99 MN055CL CLASSIC Similar to the 055A but with rapid action lever locks (instead of twist) and four angles of leg spread, providing a working platform from 175cm down to an incredible 8cm. Specifications Closed height: 61cm Minimum working height: 8cm Fully extended height: 132cm Fully extended legs and centre column: 175cm Weight: 2.3Kg Max rec. weight 6Kg [MN055CL] Also available in black finish [MN055CLB] £114.99 £119.99 MN501 VIDEO FLUID HEAD Designed to support the latest range of small, professional digital cameras as well as cameras with longer lenses and spotting scopes. The head gives best-in-themarket value and performance for payloads up to an ample 6kg. The light but positive fluid movement provides exceptionally smooth control. It has added Teflon friction adjustment to increase drag and separate pan and tilt locks. Design practicality also features a quickrelease sliding plate with VHS pin, a single pan handle and flat base with 3/8" tripod fixing. Specifications Pan: 360°; Tilt: +90° – –60° Height (fully closed) 105mm; Weight 1.5kg Max load 6.0kg [MN501] £124.99 Spares and accessories MN055 NATURE Additional pan handle [MN501LV] Spare quick release plate [MN501PL] £129.99 £29.99 £14.99 Bags & storage An MN055CL that has been tweaked specifically for wildlife and nature work, its supplied with olive green legs and a black centre column. (Special matching olive green version of the MN128 video head also available.) The top section of each leg is covered in a neoprene "leg warmer" which offer improved grip and make it easier on your hands in cold weather. The rubber feet also have retractable steel spikes. Specifications same as Classic [MN055NAT] Manfrotto super combo deals Buy any Manfrotto legs and video head at the same time and get 10% off the total price MN055PRO A very versatile tripod from the 055 series in which the centre column can be attached laterally providing a horizontal extension arm (pic below left) - great for shooting directly overhead. Rapid action leg locks (below, middle) and four position leg angles (below right)make this an extremely useful bit of kit. Bags for Manfrotto MNO55 tripod Tripod bag for MN055 legs and head. Internal dimensions 12 x 18 x 80 cm. Two versions: Standard [MNBAG] £29.99 Padded Pro version [MNPBAG] £44.99 Manfrotto tripod carry strap Wide rubberised fabric strap with spring loops for quick fastening and detachment [MN102] £19.99 Specifications Closed height: 65cm Minimum working height: 11cm Fully extended (legs) height: 135cm Fully extended height legs and centre column: 176cm Weight: 2.4Kg Max rec. camcorder/camera weight 6Kg [MN055PRO] Also available in black finish [MN055PROB] LANC remote camcorder function controllers are especially useful when used with a tripod-mounted camcorder – see Remote Controls and Extenders section £129.99 £134.99 Tripod Bush Adaptor Converts a 1/4" thread into a 3/8" thread. Manfrotto The Manfrotto support system is the one most widely favoured by professionals on both video and still photography. We can supply any Manfrotto product, just let us know what you need and we’ll confirm price and availability. [TBA] Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk £1.99 Supports & mounts Manfrotto video heads 128RC fluid video head Conversion Manfrotto MN055 Professional tripod series MN055A Spirit level Neat compact shoe mount spirit level . Clear perspex body with twin spirit levels to aid horizontal and vertical alignment of your camcorder or SLR. [LEV] £5.99 63 Keene Electronics Catalogue 2005 Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk Camcorder & accessory supports – Other camcorder mounts Camcorder car clamp Cullmann suction mount Cullmann Travel Pod Suction mounted camcorder platform that can be used on the passenger side window, or even on the outside the car for dynamic low shots. Very powerful suction cup will adhere to any smooth surface and safely support any camcorder up to 1.7kg. Two-way adjustable support arm allows easy alignment. Quick release platform for easy fitting and removal of camera. As used by councils for highway surveys. [HCC] £79.99 A versatile camcorder/camera support. A conventional 1/4” tripod thread connects to a fastadjusting ball and socket type head which has a suction cup mounting device. Simply place on to glass or any other smooth surface (car bodywork etc) and press the lever to create a very powerful vacuum mount which can stay firmly put for days on end. Another lever breaks the seal and releases the unit. Very handy, and opens up a lot of possibilities for shooting on the move or in places where a tripod just isn’t practical. Supports up to 3kg load [CUSM] £24.99 Versatile little gadget. Can be used either as a very sturdy table top tripod or as a shoulder support to aid steady shooting. The shoulder brace section rotates making it equally suitable for both Palmcorders and larger camcorders. Features a quick release camcorder attachment [TRPOD] Touring kit Pocket clamp Very handy box of tricks that should solve camcorder support problems in almost any situation. Comprises: suction cup mount with ball and socket head; a ground spike; wood screw mount and a mini tripod that can be used alone or attached to any of the other devices as an extension bar. If bought separately, these items would total £97.75 Kit price [TKIT] only £89.99 Ball joint head to a ‘G’ clamp style fixing for positioning the camera almost anywhere. Also includes two leg extensions which can be fitted to provide a flat surface tripod. Suitable for lightweight camcorders and compact still cameras up to 150g. [CLAMP] £16.99 Universal sliding plate A great gadget from Manfrotto (although it can be used on any brand of tripod) this is a platform that is designed to easily alter the centre of gravity of the camera over the tilt axis of the tripod. Ideal for camcorders that have tripod mounting bushes in awkward places, meaning they always try to tilt forward or backward when locked in position. Its also useful for fine adjustments in macro photography, (sliding range 8cm). It’s compatible with both 1/4" and 3/8" thread sizes. Top platform size is 14cm x 4.5cm. [MN357] £34.99 MANFROTTO 241 SERIES SUCTION CUP This is a suction cup with a wide (150mm diameter) base and a unique ìpump-actionî mode. To attach it you simply hold it in place and pump the blue button several times until you can no longer see the red line. It will now safely support a load of up to 3kg. If the red line becomes visible again simply re-pump. We stuck one to a whiteboard in the office and couldn't shift it no matter how hard we tried. It wasn't until the end of the day that the red line began to appear again. It is ideal for fixing to windows, car windscreens, bodywork and er whiteboards. The Suction cup is available in three versions: MN241V (vehicle brace) MN241FB (flat base) MN241 (swivel socket) This model is supplied with a swivel mount camera platform and has an added (detachable) long brace that is designed to go down to the car floor for added stability. [MN241V] £79.99 This just has a single 3/8î male thread - onto which you could attach say MN143RC or MN155RC. (You could directly attach it to a camera tripod bush but you’ld have no adjustment at all). [MN241FB] £65.00 As the FB model but with a swivel action socket for fast attachment and adjustment of MN143RC or MN155RC [MN241] MAGIC ARM WITH QUICK RELEASE PLATE A really versatile extension arm with quick lock clamps. Supplied with a quick release camera plate and secondary safety lock. 5/8" male stud on ball joint with 3/8" and 1/4-20" female thread. Works especially well with 035S Super Clamp. Max Load: 4kg [MN143RC] £99.99 All prices are inclusive of VAT. 64 SUPER CLAMP Truly a Super Clamp, this has thousands of uses and no camera bag should be without one. It holds just about everything: cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps! And they hold these items to just about everything: poles, posts, tripod legs, pipes, doors, stands, and beams -– virtually any support you can get the Super Clamps wide jaws around. It can be securely mounted on any tube or object from 12 to 51mm. The attachment is a 5/8" hexagonal socket which will hold most lighting fixtures or camera fixtures like the MN155RC. Maximum load capacity 14.9 kg (33.1 lbs) [MN035] £21.00 £39.99 £54.99 DOUBLE TILT HEAD WITH Q/R PLATE A very versatile camera platform with a quick release plate. There is a double ball joint that allows the platform to be easily rotated and positioned and a quick locking clamp to hold it secure. The base has a 3/8 female thread so it can be used in place of a conventional tripod head, and will also lock into place in the hexagonal socket of the superclamp MN035. Maximum Load Capacity 5.0 kg (11.1 lbs) Head height 15 cm (6 inches) [MN155RC] £49.00 Additional QR plate [MN128QR] £9.99 MICRO POSITIONING PLATE Ideal for macro photography to make precise positioning movements to achieve the perfect framed shot, for QTVR and other precise copy/repro work, this plate has finger-tip control for ultra-fine positioning – but with a simple lock-release lever for fast set-up. Two plates can be interlocked at 90∞ for full lateral/forward/ back movement (over 4.7"). In extruded aluminium, the plate has 1/4" and 3/8" holes and screws for tripod and camera mounting. Max load: 8kg [MN454] £55.00 Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk use more often. Before you buy, have a think about; • The size and weight of your camcorder • Your own height in relation to the fully extended height of the tripod • How heavy it is (can you comfortably carry it?) • How large it is. Is it mainly for studio type work, or will it need to fit in your gadget bag for holidays? Manfrotto Lanc Remote Control focus functions not available, limited Photo/Capture function), CCD-TR918E (Manual/Auto focus not available), DCR-TRV530 (Manual/Auto focus not available), DSR-200AP - DVCAM (Backlight and Manual/Auto focus functions not available, limited Photo/Capture function) The 522C and 522CA are compatible with the following Canon LANC-enabled video cameras: XL-1, XL-1S, XL-1SE, GL1, GL-2, XM-1, XM-2 and control the following camera functions: STBY, REC, ZOOM, DISPLAY ON/OFF, REC SEARCH - and REC SEARCH + The 522A SONY & 522CA CANON remotes fit video heads with 13mm diameter pan handle (eg Manfrotto 700RC2, 128RC) The 522 SONY & 522C CANON remotes fit video heads with 19mm diameter pan handle (eg Manfrotto 501, 503, 505, 510, 516 116MK3, & Vinten PRO-9, PRO-5, PRO-130) Sony 19mm [MN522] £189.00 Sony 13mm [MN522A] £189.00 Canon 19mm [MN522C]£189.00 Canon 13mm [MN522CA] £189.00 A new video tripod from Hama that features an integral LANC remote control built into the pan-handle.The LANC control has buttons for power on/off, zoom in/out, start/stop, focus and photo. The tripod itself is well built making this a very attractive package. Specifications: • Folded height 67.5 cm • Extended height 160 cm • Weight 1700g • Quick release platform • Cranked column with air damping • Integrated remote control for Sony/Canon camcorders • 2D pan & tilt head • Spirit level [G80] £59.99 Spare quick release plate [HP74QR] £7.99 Accessory supports and mounts VSL3 Twin shoe bracket Modular suspension system Smart ‘U’ shaped bracket simply screws into the tripod mount on the underneath of the camera and gives you two shoes for lights, mics etc. Also provides an extra grip at the side to help steady shooting. Can be fixed either right or left. [TWINSHOE] £19.99 Table-top microphone stand with standard microphone thread [MS90] Butterfly clamp For use with MS90 table top mic stand if your microphone doesn’t have a threaded holder [BC] £3.99 £5.99 Designed to completely eliminate unwanted handling noise, this is effectively a "cats cradle" which suspends the microphone inside an array of clips and bands. The modular construction makes it easy to adjust to your particular mic, and its supplied with both pistol grip and a boom adaptor. Very useful (ideal for the K6 system). [RMSS] £159.99 Hot Shoe Shock Mount Designed to completely eliminate unwanted handling and transmitted mechanical noise, the Beyer EA86 simply fastens to your microphone shoe and suspends your mic within a cats cradle of elastic. The shoe base is also threaded (3/8” & 5/8”) for conventional mic stand or tripod use. Very effective and great value for money (max diameter of mic body 30mm). [EA86] £17.99 Visitors are welcome at our showroom/warehouse. We have full demonstration facilities – why not try before you buy? Monday–Friday 9.00am–5.30pm, Saturday 9.00am–5.00pm Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk 65 Bags & storage manual dexterity you need, and where do you find the time to keep your visual skills as high as they need to be? Manfrotto’s solution is the 522 LANC video camera remote control, which is mounted directly on the pan bar of your existing video head. At last you really can do it all with one hand tied behind your back, but both eyes on your subject. The 522 puts all the essential recording functions of your video camera within easy reach and well inside your sightline on the handle of the video head so you can pan, tilt, zoom and focus all at once: now you only have to worry about what to wear to the Oscars. There are four models of Manfrotto LANC remote control available at present: The 522 and 522A are compatible with the following SONY LANCenabled video cameras: DSR-250P, DCR-PC120E, DCR-PC110E, DCRPC101E, DSR-PD150, DSR-PD100, DSR-PDX10, DCR-XV2000E, DCRTRV950E and control the following camera functions: STBY, REC, ZOOM, FADER, FOCUS (manual/auto), PHOTO. * The following SONY cameras can also be controlled by the 522 and 522A, but with slightly reduced functions:DCR-VX100E (Backlight and Manual/Auto Supports & mounts Great film-making should be about finding the right frame, not finding the right button. The more features you come to expect from your video equipment (be it camera or support), the more controls you find yourself having to manage simultaneously. And if, like the rest of us, you only have two hands, your working life isn’t getting any simpler – framing the perfect shot, taking a test still, starting your recording, panning, tilting and tracking the subject across differently lit areas, zooming in and bringing up the focus then wrapping up the take without wasting precious tape has needed you to have the virtuoso fingertip sensitivity of a concert pianist. But devote your life to developing the level of GAMMA 80 LANC TRIPOD Conversion Choosing tripods The function of a tripod is something which will hold your camcorder or camera nice and steady, and so it follows that a big, heavy tripod will do this job pretty well. Unfortunately, if it’s so big and heavy that you can’t be bothered to lug it about with you, it will get very little use and so end up having been a fair old waste of money. Modern tripods have been designed to provide maximum strength and rigidity, whilst keeping weight to a minimum, and so make them an item that you will hopefully Keene Electronics Catalogue 2005 Keene Electronics Catalogue 2005 Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk Accessory supports and mounts (continued) SCREW-IN SHOE ADAPTOR A great little problem solver, this just screws into any 1/4î tripod bush to allow the equipment to be fixed onto a std shoe type mount. [SM] £8.99 Mic Stand Shock Mount A professional shock mount from Audio Technica. A butterfly type spring clip will hold most cylindrical or tapered microphone bodies (1628mm) and the suspension system eliminates all handling noise. 5/8” screw threaded for use on mic stand or boom arm. [AT8410] £49.99 LIGHTING STANDS Accessory shoe Standard accessory shoe with a very strong self adhesive base. Simply sticks on to the camcorder (or why not on to the battery?) to allow fitting of external microphones, video lights etc [SHOE] £3.99 TILTING SHOE ADAPTOR Simply attaches to your existing shoe mount to provide a tilting shoe mount. Great for bouncing video lights and tweaking the tips of microphones back out of view on wide angle shots! (overall height approx 45mm). [TSM] £9.99 Unomat No.2 stand, 3 section, max extended height 2.15m, closed 64cm (pictured) [LSUN2]2 £69.99 Unomat No.3 stand 4 section, max extended height 3.1m closed 90cm [LSUN3] £79.99 NEW: Projector ceiling mounts Close coupled Projector cradle A flush to the ceiling ball joint bracket with a steel safety wire for extra security. The 90 degree tilt and 360 degree swivel facility is easily adjusted by using the brake screw and allen key provided. Attractive plastic cover plates hide the fixing screws. Only 9cm drop, 360 degree swivel at mount 90 degree tilt [BT880CC] £19.99 (Must be used in conjunction with either BT880UN1 or BT880UN2) A universal projector mount of which the width, length and depth of the cradle can be easily (thumbwheel) adjusted for the perfect fit. Cradle dimensions: Length 255mm–391mm, Width 95mm – 230mm, Height 52mm – 101mm [BT880UN1] £39.99 (Must be used in conjunction with either BT880CC, BT880M or BT880L) Carousel mount Medium & long arm These ceiling mounting plates have a tilt facility at the plate making them suitable for both angled or flat ceilings. The length can be adjusted by a lever which allows for the projector to be mounted at a drop of 50cm to 75cm (BT880M) or 75cm to 122cm (BT880L). The projector mount can also be rotated allowing for a 360 degree swivel. The outer tube diameter is 42mm. [BT880M] (50-75cm) £29.99 [BT880L] (75-122cm) £39.99 (Must be used in conjunction with either BT880UN1 or BT880UN2) This mount is designed to virtually all projectors with mounting holes within a diameter of 335mm. Supplied with a round Carousel disc, and eight arms (4 short and 4 long), it caters for many different mounting variations and is also provided with a good selection of commonly needed M4, M5 and M6 screws. The thumbwheels make it easy to loosen the arms and move the Carousel disc to replace the projector bulb without having to taking the whole projector off the mount. [BT880UN2] £29.99 (Must be used in conjunction with either BT880CC, BT880M or BT880L) Universal plasma and large flat screen supports PLASMA TROLLEY Ceiling mount bracket A trolley designed specifically for plasma screens and large non-VESA LCD screens. A heavy duty base (available in either silver or graphite black finishes) supports two 60mm chrome poles, on which the adaptor plate is mounted (using two collars). 4 high quality, non-mark braked castors make movement quick and smooth, and help make the unit ideal for use in boardroom presentations, colleges and schools or for display purposes. Castors may be changed for feet (included). Trolley dimensions: height 167cm (inc wheels), width 70cm, length 100cm [BT8004KG] (graphite) £399.99 [BT8004KS] (silver) £399.99 Optional DVD/VCR shelf that conveniently fixes to one of the trolley uprights (support collar required) Shelf [BT7040] £29.99 Support collar [BT7060] £9.99 This is a kit consisting the universal mount, 2 special heavy duty collars for fixing to 60mm diameter poles, a heavy duty ceiling mount and either a 0.5m or 1m ceiling pole. The ceiling mount bracket is 200mm x 200mm with an adjustable angle of up to 45 degrees. Available in either chrome, silver or graphite finish* 66 [BT8016KC] CEILING MOUNT KIT 0.5m CHROME £139.99 [BT8016KC1] CEILING MOUNT KIT 1.0m CHROME £159.99 [BT8016KG] CEILING MOUNT KIT 0.5m GRAPHITE £139.99 [BT8016KG1 CEILING MOUNT KIT 1.0m GRAPHITE £159.99 [BT8016KS] CEILING MOUNT KIT 0.5m SILVER £139.99 [BT8016KS1] CEILING MOUNT KIT 1.0m SILVER £159.99 (*note that the universal mount is always a metal finish, only the pole and ceiling bracket are coloured) Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk Wall mounts for plasma and large flat screens A new range of simple-to-install, universal mounts designed specifically for plasma screens and large LCD screens. We supply each mount together with a universal fixing kit, one specifically for Plasma screens, the other specifically for large (23‰ or larger with VESA 100x100, 100x200 or 200x200 mount) LCD screens. Suitable for all screens up to 70Kg in weight. Plate dimensions are 280mm x 500mm. Distance from wall 40mm. Supplied complete with wall fixings and locking security screws. [BT8000] (for plasma displays) [BT8000L] (for large LCD displays) £79.99 £79.99 Wall bracket for stud walls Wall bracket with tilt Designed for mounting plasma or large LCD screens including all major brands, on concrete, brick or 16" stud walls. It can be mounted flat to the wall or with a variable downward tilt of up to 20 degrees. Wall fixings and security screws provided [BT8002] (for plasma displays) [BT80002L] (for large LCD displays) FLAT WALL MOUNT For screens up to 21”, max weight 14Kg Distance from wall 20mm, locking screw for added security. Finish: Silver. Supplied with BOTH 75mm and 100mm VESA Mounts [BT7510] £19.99 WALL MOUNT WITH TILT For screens up to 21", max Load 14Kg. Tilt of 17° up and down. Finish: Silver. Supplied with BOTH 75mm and 100mm VESA Mounts [BT7511] £24.99 WALL MOUNT WITH TILT & SWIVEL £89.99 £89.99 Articulated wall bracket with tilt and swivel This mount allows the screen to be mounted either flat to the wall, or extended up to 280mm (11") from the wall. The BT7512 can swivel 180 degrees at the wall and 240 degrees at the end of the arm. For screens up to 23", max Load 20kg. Tilt of 17° up and down. Finish: Silver. Designed for BOTH 75mm and 100mm VESA fixings [BT7512C] (chrome finish) £29.99 BT7512S] (silver finish) £29.99 WALL MOUNT WITH ARTICULATED SWIVEL ARM This mount allows the screen to be mounted either flat to the wall, or extended up to 450mm (17.75") from the wall. This makes it the ideal space saver by allowing the screen to be folded away when not in use. The BT7513 can swivel 180 degrees at the wall, 240 degrees at the end of the double arms, and a further 240 degrees at the joint between the VESA plate and arms. For screens up to 21", max Load 20kg. Tilt of 17° up and down. Finish: Silver. Designed for BOTH 75mm and 100mm VESA fixings [BT7513C] (chrome finish) £34.99 BT7513S] (silver finish) £34.99 £279.99 £279.99 £279.99 £279.99 Tel 0870 990 9000 Fax 01332 830551 Web www.keene.co.uk All prices are inclusive of VAT. 67 Bags & storage Three pivot points (one at wall, one "elbow" and one at the screen make this bracket the most flexible on the market. There are five mounting positions on the wall bracket offering full flexibility when mounting. It can be mounted on concrete, brick or stud walling and includes holes for cable management. As with all B-Tech large screen mounts, the BT8003 is supplied with the unique locking screws for a secure installation. To help the installer, or end user, a special pitch adjustment feature is included (shown on right). This enables the screen to be positioned without horizontally even if the wall bracket is a little wonky. The BT8003 has a variable downward tilt of up to 20 degrees, be extended to up to 780mm from the wall, or be folded flat for storage. * 3 pivot points for maximum swivel * maximum extension 780mm * variable downward tilt of up to 20 degrees * pitch adjustment * Max screen weight 70kg * finished in black or silver [BT8003] (for plasma displays black finish) [BT8003S] (for plasma displays silver finish) [BT8003L] (for large LCD displays black finish) [BT8003SL] (for large LCD displays silver finish) These mounts are designed to fit the VESA standard Flat Panel Monitor mount. As long as your monitor has this standard mount (either 75x75mm or 100x100mm) and is within the weight limit all of the mounts listed here will work with it. To check if your monitor conforms look for inserts in a 4 hole pattern as shown in the drawing. The 4 hole pattern is usually located in the middle of the Monitor. You may have to remove the stand or remove the plastic cover panels. Supports & mounts Designed specifically to cover three 16" studs which is ideal for use in installations where dry walling is predominant, but can equally be used on concrete or brick walls too. It is supplied with unique locking screws for a secure installation. [BT8001] (for plasma displays) £79.99 [BT80001L] (for large LCD displays) £79.99 LCD display wall mounts Conversion Flat wall bracket for concrete & brick walls Keene Electronics Catalogue 2005