Camera Enclosures And Camera Mounting Blocks

Transcript

Camera Enclosures and Camera Mounting Blocks FOR ORCA ENCLOSURES Protect your vision system! Revision 4.1, November 2011 Valid until further notice www.adept.net.au Camera Enclosures and Camera Mounting Blocks Foreword and Disclaimer This documentation has been prepared with the upmost care. However autoVimation does not take liability for possible errors. In the interest of technical progress, autoVimation reserves the right to perform technical changes without prior notice. Please notify [email protected] if you become aware of possible errors in this manual or if certain topics require more detailed explanation. Copyright This manual is intended for autoVimation's customer only. Any publication of this document and parts thereof requires written permission from autoVimation. Patents and trademarks autoVimation's camera enclosures have been patented and is therefore protected by international laws. Any violation of the patents pending will be prosecuted. Any product and company names used in this manual are property of their respective owners. © 2011 autoVimation Peter Neuhaus, Karlsruhe, Germany 2 © 2011-2012 autoVimation Peter Neuhaus, Karlsruhe, Germany www.adept.net.au Camera Enclosures and Camera Mounting Blocks 1 General Features of autoVimation's Protective Enclosures 1. Compact size – with 3 housing cross-sections in different length – automVimation's enclosures are only a little larger than a camera with lens and connectors. 2. Good heat dissipation – most cameras are cooler inside this housing compared with free camera mounting 3. Flexible and fast and vibration proof mounting of the camera inside the enclosure with Quick-lock module (flexible lengthwise position and image angle). 4. Different rear wall options allow to connect large connectors and / or multiple cables to the camera. 5. Large range of mounting brackets allowing to adjust the enclosure to any requirements 1 –. Mounting of autovimation light holder mounting arms to any side of the enclosure 2. 6. Room for large lenses and even ring-lights. All front windows 45mm aperture with both sides multi-layer AR coated window (can be replaced with most enclosures ex works with any 50mm or 2” color filter or special optics up to 10mm thick). 1 2 4 refer to the “Camera Enclosure Mounting kits” brochure for details. refer to the “illumination adapters and mounting arm brochure” for details. © 2011-2012 autoVimation Peter Neuhaus, Karlsruhe, Germany www.adept.net.au Camera Enclosures and Camera Mounting Blocks 2 Camera Enclosure and Camera Mounting Block Selection Guide The main selection criteria is the camera size: Maximum camera diagonal (corner to corner) Height h L Camera body length without Cmount flangue Width W Max. height H Max. width W Max Diagonal Salamander enclosures 38mm 40 with edge radius Depends on height Camera must fit into 55mm Diameter tube Feuersalamander enclosures 38mm 40 with edge radius Depends on height Camera must fit into 55mm Diameter tube Orca Enclosures 60mm 60-65 with edge radius Depends on height Camera must fit into 85mm tube For special hygienical requirements for instance in the pharmaceutical and food industry, select the stainless steel “Feuersalamander” range of enclosures. © 2011-2012 autoVimation Peter Neuhaus, Karlsruhe, Germany www.adept.net.au 5 Camera Enclosures and Camera Mounting Blocks 5 Orca Camera Enclosures and Camera Mounting Blocks An IP67 Orca enclosure with 2" and 3" front windows 5.1 Matching camera dimensions and -models Maximum corner to corner diagonal = 85mm H max = 60mm L Camera body length without Cmount flangue W max = 60mm Maximum camera height H Maximum camera width W Camera Model Examples7 60mm (62 with 3mm corner radius) 60mm (62 with 3mm corner radius) SICK® Ranger, FLIR A320 (with Germanium front window), e2v® Aviiva, SONY® XCL U1000, XCL 5005, DXC 390 P and more FESTO® SBOC, Sensopart® FA45 and others JAI® Basic, Advanced, M2, M4 Dalsa Falcon ToshibaTeli® CSB4000F, CS3960DCL, Clever Dragon IDS® µEye UI...IE Kappa® DX40 Basler® Runner, A200, A300 SVS Vistek® SV Cam CF Photonfocus® MV D750, DS1-D1312, etc. and many more 7 These are examples only – there are many more cameras that fit into the Salamander enclosure and mounting block. © 2011-2012 autoVimation Peter Neuhaus, Karlsruhe, Germany www.adept.net.au 19 Camera Enclosures and Camera Mounting Blocks 5.2 Different front window options All Orca enclosures are now available with 2" and 3" front windows. The 2" window allows the attachment of the sind curtain. The 3" window is suitabgle for wide angle lenses. Alternatively a larger ring light can be monted directly behind the front window. 5.3 Different rear wall options Rear Wall A: Corugated PA tube system - refer to the Salamander section for details. Rear Wall C: Large, M32 cable gland with full seal insert for self-drilling. This allows customisation to the cable diameters, feeding though more than one cable and connectors up to 26mm diameter. Another option is the use of a smooth metal conduit tube with PVC coating (refer to the next section). Please contact autoVimation for any special cabling requirements. 5.4 Accessories for Orca enclosures Ring light mount A ring light mount is available for all Orca enclosures with 3" front window. This spider adapter plate for Orca 3" allows to mount ring lights with diameter up to 78mm directly into the front lid, close to the front window. This protects the light and avoids back reflection into the camera lens. Spider Illumination Adapter Plates Spider adapter plate Orca 3" Order Number 30.160.010 Heating and cooling Refer to the catalogue “Climate control for camera enclosures” catalogue. 20 © 2011-2012 autoVimation Peter Neuhaus, Karlsruhe, Germany www.adept.net.au Camera Enclosures and Camera Mounting Blocks 5.5 Orca camera mounting blocks Orca camera monuting blocks are available with 80mm length. 5.6 5.7 Order numbers Orca enclosures and mounting blocks 8. Camera enclosures Order Number 20.040.130 20.040.180 20.040.250 20.041.130 20.041.180 20.041.250 20.045.130 20.045.180 20.045.250 20.046.130 20.046.180 20.046.250 Orca S, 2", front window, length 140mm, Rear Wall A Orca M, 2" ,front window, length 180mm, Rear Wall A Orca L, 2", front window, length 250mm, Rear Wall A Orca S, 2", front window, length 140mm, Rear Wall C Orca M, 2", front window, length 180mm, Rear Wall C Orca L, 2", front window, length 250mm, Rear Wall C Orca S, 3", front window, length 140mm, Rear Wall A Orca M, 3" , front window, length 180mm, Rear Wall A Orca L, 3", front window, length 250, Rear Wall A Orca S, 3", front window, length 140mm, Rear Wall C Orca M, 3" , front window, length 180mm, Rear Wall C Orca L, 3", front window, length 250, Rear Wall C Please specify camera model and cabling requirements with any order! Camera mounting blocks Order Number Orca, camera mounting block, 80mm Length 5.8 15.030.080 Dimensions of Orca enclosures: Dimensions of the Orca M(180) enclosure. Add 70mm to all Orca L(250) and subtract 50mm for all Orca S(140mm) models. © 2011-2012 autoVimation Peter Neuhaus, Karlsruhe, Germany www.adept.net.au 21 Camera Enclosures and Camera Mounting Blocks 8 IP Protection Tests In addition to our own testing, we also get our enclosures tested by independend organisations. All our current enclosure models have met the requirements for IP66 and IP67 tests according to EN 60529: 24 © 2011-2012 autoVimation Peter Neuhaus, Karlsruhe, Germany www.adept.net.au