Transcript
The Bewator range of professional camera housings suit virtually all surveillance applications. Combining tough extrusions and castings, we have created aesthetically pleasing designs which are not only durable but are also easy to install and facilitate on-going servicing of the camera and lens assembly. Available in three standard sizes the range can accommodate most common camera/lens combinations. As an option we can supply housings with built in telemetry receivers for effective cable management and easy installation.
Camera Housings
Camera Housings
Housings The Bewator range of professional camera housings suit virtually all surveillance applications. Combining tough extrusions and castings, we have created aesthetically pleasing designs which are not only durable but are also easy to install and facilitate on-going servicing of the camera and lens assembly. Available in three standard sizes the range can accommodate most common camera/lens combinations. As an option we can supply housings with built in telemetry receivers for effective cable management and easy installation. • • • •
Optional integral wiper with wash facility Weather proofing to IP65, IP66 or IP67 Suitable for all internal and external applications Environments with temperature extremes are catered for by advanced heater/blower options, even where exposed to direct sunlight
Weatherproofed to IP66
Integral telemetry receiver options
Super Connoisseur - HS01 • Ideal for pan, tilt and zoom installations with larger zoom lenses • Suitable for use with built-in RX210 series 10 function telemetry receiver • Recommend system partners: P16 & P25 pan and tilt heads and 6000 series controller • Sunshield and demister fitted as standard • Internal and external cooling fan option • Optional mounting kit for large zoom lenses • Usable Internal Dimensions 400mm x 125mm x 110mm • 230 Vac, 12/24 Volts
Weatherproofed to IP67
Compact Connoisseur - HS02B • Full cable management • Provides an aesthetically pleasing installation and protection for vulnerable cables at a very competitive price • Bracket allows low voltage cables to be insulated from power cables to fully comply with wiring regulations • Unique taper lock joint system (patent GB2372290B) • Allows accurate positioning of camera without the need to hold it in position prior to locking • Locks securely with a turn on a single Allen bolt for quick installation • Sunshield and demister fitted as standard • "Slide and hang" cover • Provides easy in-situ access for installation and servicing • Optional tamper switch and vandal resistant screws • Unique Ceiling adapter • Enables mounting of the housing from a canopy or ceiling whilst maintaining full cable management and aesthetic quality • Usable Internal Dimensions 225mm x 85mm x 80mm
Ideal for cameras with integral lenses or camera modules
HS03B • A smaller size housing ideal for fixed cameras both internal and external • Includes freely adjustable wall bracket • Usable Internal Dimensions 180mm x 85mm x 80mm • Sunshield and demister fitted as standard • "Slide and hang" cover • Provides easy in-situ access for installation and servicing • Optional tamper switch and vandal resistant screws • Ideal for use with cameras with integral lenses or camera modules
Large Pre-fabricated Housings -HV01-50/60 • Traditionally-styled folded aluminium construction • Fits most camera/lens combinations • Wash wipe option • Heater option • Fan cooled option • Easy access for installation and maintenance • Internal Dimensions (HV01-50) 500mm x 145mm x 140mm • Internal Dimensions (HV01-60) 600mm x 175mm x 175mm • 230 Vac or 24 Vac models Recommended pan/tilt head: P65/P60 Series
Housing Brackets
Bewator makes a complete range of brackets, suitable for both wall and ceiling mounting, that can be used with most of the commonly used thirdparty housings and all of the Bewator camera housing range. • BH15 - Wall bracket for use with HS01-25 and HS02 Suitable for loads up to 15 kg • BH20Mk2 - Wall bracket for use with HS01-35, HS01-40 and HV01-50 ranges Suitable for loads up to 20 kg.
9
H S0 3B H V0 150 H V0 160
H S0 1 H S0 2B Specification External Dimensions
Length Width Height
627mm 155mm 148mm
458mm 133mm 125mm
332mm 133mm 125mm
613mm 194mm 204mm
762mm 230mm 272mm
Usable Internal Dimensions
Length Width Height
400mm 125mm
225mm
180mm
85mm
85mm
500mm 145mm
600mm 175mm
100mm
80mm • •
140mm
175mm
• 6kg
80mm • •
•
3.54kg
2.54kg
• 4kg
8kg
-20˚/+60˚
-20˚/+60˚
-20˚/+60˚
-20˚/+60˚
-20˚/+60˚
Integral Bracket Sunshield Standard Weight Including Sunshield Temperature Range ( ˚C) Environmental (BS EN60 529) Power Supply Mains Version Power Supply Low Voltage Heater/Demister (Thermostatically Controlled) Wiper Kit Option Internal Fan Kit Option 230Vac 24Vac External Fan Kit Option 230Vac Anti-Tamper Kit Option Camera Mountings Mounting Kit For Large Zoom Lens Option Integral Camera PSU Option 230Vac Body Paint Colour RAL 7032 Polyester Powder Coat Leatherette-Finish Full Gloss Paint
IP66
IP67
IP67
IP65
110-230Vac
110-230Vac
110-230Vac
230Vac
IP65 230Vac
12-24V ac
12-24V ac
12-24V ac
24V ac
24V ac
•
•
•
• •
• •
• •
• •
•
•
• •
• •
• • • • •
•
•
•
•
• •
•
•
•
•
• •
• •
• •
FYCHUK/02-03
