Preview only show first 10 pages with watermark. For full document please download

Camera Outdoor Housing Dt

   EMBED

Share

Transcript

Camera Outdoor Housing SPECIFICATIONS ◎ ◎ ◎ ◎ Entirely made of die-cast aluminium Light ivory powder coating finished Dimensions: 250L*100W*95H mm, Max. load: 35Kgs Supplied with: BR-18 Fully-cable management bracket, and accessories for camera/lens installation CE in compliance with EN 60335-1:1994 IP44 (with cable glands) in compliance with IEC 60529 MECHANICAL ◎ ◎ ◎ movable cable glands: PGA11 x 2 Level IP68 Inner space for camera : W105 x H80 x L250 mm Tempered glass window (WxH): 95 x 80 x 4 mm ◎ ◎ ◎ 12VDC Blower: Turn on at 35℃+/-3℃; Turn off at 25℃ +/-3℃ ; 39 CFM POWER SUPPLY EP 2028: Two 90~264VAC inputs / Four 12VDC outputs Rating Current: Continuous 3A DC / Typical 3.5A DC Ripple below 100mV, Conform With Safety Standard 3 way terminal block with 3 Amp. Fuse / Spare 6 way terminal block UL 1015#18 brown/blue/green-yellow wires 22AGW Silicone rubber insulated with glass fiber braided wire Electric ◎