Car Entertainment System

Transcript

WARNING: This unit must be installed by a professional technician only or the warranty will be void. Car Entertainment System with Reversing Camera Model Number: ACE-014 INSTRUCTION MANUAL AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 Remote Control 1 27 2 26 3 25 24 23 4 5 6 7 8 9 10 11 12 22 21 20 19 18 17 16 15 13 14 1 MODE: Press to select different input modes: Radio, Disc (if there is a disc in the unit), USB (if there is a USB device in the unit), Bluetooth and AV IN. 2 POWER: Power ON or OFF. 3 RDM/BAND/C: • In Radio mode, press to change radio band in sequence of FM1 FM2 FM3 AM1 AM2. • In Disc mode, press to play randomly. • In Bluetooth mode, press it to clear a single phone number. 4 5 6 7 8 ii / / / : Use to navigate through menu settings. ENTER: Press to confirm selection or setting. EJECT: Press to eject the disc. *: In Bluetooth mode, press to enter a * symbol. RPT/#/P.SCN/ : • In SD/USB mode, press to REP 1 (repeat one track) (repeat directory) REP ALL (repeat all). REP DIR www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Remote Control (Cont.) • In DVD mode, press to repeat REP OFF (repeat off) REP CH (repeat chapter) REP TT (repeat title) REP A (repeat all). • In Radio mode, PS (Preset Scan): Press to scan all preset stations in the memory of the current band and stay on each memory station for about 5 seconds. • In radio mode, As (Auto Save): Long press to save the stations with good reception automatically. • In Bluetooth mode, press to enter a # symbol. 9 LOUD: Change loudness setting ON or OFF. 10 SEEK-: • In DVD/USB mode, short press to skip to the previous track; press and hold to fast reverse a track. • In Radio mode, short press to skip to previously programmed preset channels; press and hold to auto scan channels backwards. 11 PBC/STOP: • In Disc mode, press ONCE to stop the disc playing; press the PLAY/ PAUSE button to resume playback from the last played location. Press the button TWICE to stop playback completely. • When watching VCD discs, press and hold for two seconds to set PBC on/off. 12 OSD: In DVD mode, press to show on-screen menu options. 13 0-9 DIGITS: • In Radio mode, select preset stations 1-6 on the desired band. • In DVD mode, select a track. • In Bluetooth mode, press to input a phone number; long press the 0 digit to enter a + symbol. 14 OPEN /TILT: • Short press to open and close the TFT screen. • Press and hold to tilt the 7” screen at different angles. 15 VOL-: Press to decrease the volume level. 16 AUDIO: • In Disc mode press to select the audio language. • When watching VCDs, press it to select the sound track in the sequence of MONO L MONO R STEREO. 17 SEL: Press to enter the SOUND SETTING menu. iii www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Remote Control (Cont.) 18 /SEEK+: In DVD/USB mode, short press to skip to the next track; press and hold to fast forward a track. • In Radio mode, short press to skip to next programmed preset channels; press and hold to auto scan channels forwards. 19 VOL+: Press to increase the volume level. 20 ZOOM: Press and hold for two seconds in DVD mode to zoom the image in or out in the sequence of ZOOM 2 ZOOM 3 ZOOM 4 ZOOM 1/2 ZOOM 1/3 ZOOM 1/4 ZOOM off. 21 ANGLE/ACCEPT: • In DVD mode, press repeatedly to change the viewing angle (available only with a recorded DVD file or DVD disc that supports this function). • In Bluetooth mode, press to make a call after entering a phone number or accept an incoming call. 22 REJECT: In Bluetooth mode, press to reject an incoming call or hang up after answering a call. 23 SETUP: In DVD mode, press to enter the setup menu; press again to resume playback. 24 HOME: Press to access the main on-screen display page. 25 SUBTITLE: Press to select the subtitle language (available only if the disc supports subtitles). 26 MUTE /BLUETOOTH: • Short press to mute the volume output; press again to restore volume. • Long press to enter into Bluetooth mode. 27 PLAY/PAUSE: In DVD mode, press to pause playback; press again to resume playback. • AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 iv Remote Control (Cont.) Remote Control Battery The remote control comes with a CR2025 3V lithium button cell fully installed. The battery should normally last for about one year, depending on how frequently the remote control is used. • To use the remote control, pull out the plastic tab that separates the battery from the contacts inside the compartment. • If the remote control unit is no longer working even when it is operated near the unit, you will need to replace the battery with a new battery of the same type. Pull out the battery tray and remove the old battery. Insert a fresh CR2025 button cell with the (+) marking facing upwards. Then push the tray with the battery back into the unit. WARNING! Keep batteries out of reach of children. Swallowing may lead to serious injury or death in as little as 2 hours due to internal burns. If swallowed, go straight to a hospital emergency room. Dispose of used batteries immediately. • • • If the remote is not used for an extended period of time, remove the battery to prevent possible damage from battery leakage and corrosion. Do not attempt to short-circuit, disassemble or throw batteries into a fire. Dispose of batteries promptly and properly, observing any local hazardous waste regulations. Do not burn or bury them. Using the Remote Control • • • • v Do not use the remote control while driving. Point the remote control directly towards the remote control sensor at the front of the system. Make sure no obstacles are blocking its path. The remote control will not operate if its path is blocked. The operating distance may vary depending on the brightness of the ambient light. Handle the remote control with care. Do not drop, apply shock or step on the remote control. Do not spill water on the unit. If you do not intend to use the remote control for an extended period of time, remove the batteries to prevent possible leakage and corrosion. www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Welcome Congratulations on choosing to buy a BAUHN® product. All products brought to you by BAUHN® are manufactured to the highest standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 1 Year Warranty. We hope you will enjoy using your purchase for many years to come. AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 1 Contents Remote Control ii Welcome 1 Warranty Details 3 General Safety Instructions 4 Product Overview 7 Instructions 10 FAQs 20 Installation 22 Other Useful Information 27 Specifications 28 Repair and Refurbished Goods or Parts Notice 29 2 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Car Entertainment System Warranty Details The product is guaranteed to be free from defects in workmanship and parts for a period of 12 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labour. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 3 General Safety Instructions Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Follow all instructions and take notice of all warnings to reduce the risk of fire or electric shock. WARNING: This unit must be installed by a professional technician only or the warranty will be void. Driving safety — read before installation! • Connection: To promote safety, certain functions are disabled unless the parking brake is on. The system is designed to detect parked status and must be connected to the power supply side of the parking brake switch. Improper connection or use of this connection may violate applicable laws and may result in serious injury or damage. • Front Video Image Display: To avoid any risk of accident or injury, and the potential violation of applicable laws, never use the front video screen while the vehicle is being driven, unless utilizing the rear view camera when reversing or parking. • DVD Playback: Do not use this system with a video screen that is visible to the driver, unless when using the rear view camera and navigation system. DVD playback is disabled unless the vehicle is stationary and the parking brake is engaged. • Volume: Always keep the volume low enough so that you can hear sounds from outside the vehicle. • Location: Do not install the unit in such a way that it would encumber the driver when operating the units controls. Ensure the unit is within easy reach form the driver’s seat. • Usage Restriction: The equipment is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the equipment by a person responsible for their safety. • Children: Supervise young children to ensure they do not play with the equipment. • Liability: We accept no liability for any injury, damage or lost data caused by noncompliance with these warnings or other improper use. 4 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 General Safety Instructions (Cont.) WARNING: This unit must be installed by a professional technician only or the warranty will be void. Installation Precautions • Do not drill a hole into the engine compartment to connect the yellow cable of the display unit to the vehicle battery. Engine vibration may eventually cause the insulation to fail at the point where the wire passes from the passenger compartment into the engine compartment. Take extra care in securing the wire at this point. • Make sure that cables will not interfere with moving parts of the vehicle, such as the shift lever, parking brake or seat sliding mechanism. • This unit cannot be installed in a vehicle without ACC (accessory) position on the ignition switch. • Use this unit with a 12V battery and negative grounding only. Failure to do so may result in a fire or malfunction. • To prevent a short circuit, overheating or malfunction, be sure to follow the directions below: • Disconnect the negative terminal of the battery before installation. • Secure the wiring with cable clamps or adhesive tape. Wrap adhesive tape around wiring that comes into contact with metal parts to protect the wiring. • Place all cables away from moving parts, such as the shift lever and seat rails. • Place all cables away from hot places, such as near the heater outlet. • Do not connect the yellow cable to the battery by passing it through the hole into the engine compartment. • Cover any disconnected cable connectors with insulating tape. • Do not shorten any cables. • Never cut the insulation of the power cable of this unit in order to share the power with other devices. The current capacity of the cable is limited. • Use a fuse of the rating prescribed. • Never wire the negative speaker cable directly to ground. • Never band together negative cables of multiple speakers. AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 5 General Safety Instructions (Cont.) Operation Precautions • Operating Conditions: Avoid installing the product in areas where it is exposed to direct sunlight, high levels of dust, high temperatures (over 40°C) or high humidity (over 90%). In case of high temperatures, cool down the car interior by means of ventilation or air-conditioning. • Protect From Moisture: Do not allow this unit to come in contact with water or any liquids. Contact with liquids could result in electric shock and/ or damage to the unit. • Ventilation: Operate the unit in well ventilated areas. Do not install the unit where the cooling fan is blocked. • Hot Temperatures: Car parking under direct sunlight may increase the temperature inside the car, which may affect the unit's ability to operate properly. In such a case, reduce the temperature inside the vehicle and try again after the temperature has returned to normal. • Switching ON/OFF: Do not turn on or off the product in short intervals. When turning the unit off, wait for at least 10 seconds prior to turning it on again. • Playing Discs: Do not operate the player with scratched, bent, broken or irregular shaped discs. When a disc is not loaded properly, do not force it into the player. • Monitor Position: If the back of the monitor touches the dashboard or air conditioner inlet etc. After the monitor is opened, then adjust the TILT level in the monitor TILT menu to prevent damage from repeated touching. If the open monitor position is hindering remote control operation. In such a case, make sure to use the remote control at a similar level of the remote control receiver. • Monitor Operation: Do not open and close the monitor manually, it may damage the monitor tilt system. Do not touch the LCD screen with hard objects, which may damage or scratch the screen. • Do Not Repair Yourself: This unit does not contain any parts you can repair yourself. Do not open it or attempt to repair or modify the unit. Opening or removing covers may expose you to dangerous high voltage or other hazards, and it will invalidate your warranty. • Damage: If the unit has been damaged, have it serviced or repaired by qualified personnel, contact the after sales support line for advice. • Fuse: Do not replace the fuse on the power cable without professional guidance. Using an inappropriate fuse may cause damage to the unit or cause it to burn. 6 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Product Overview Faceplate 16 15 1 2 14 20 3 13 4 5 6 7 8 9 10 11 12 Front Of The Unit (behind the faceplate) 17 18 19 The buttons and controls are explained on the following pages. AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 7 Product Overview (Cont.) Buttons and Controls 1 DISC Slot 2 BAND/TILT Button: • BAND: In Radio mode, press to change radio band in sequence of FM1 FM2 FM3 AM1 AM2. • TILT: Press and hold to tilt the TFT display screen. 3 MODE/GPS Button: • Press to select different input modes: Radio, Disc (if there is a disc in the unit), USB (if there is a USB device in the unit), Bluetooth and AV IN. • Press and hold to select GPS mode. 4 SEL/MUTE Button: • Short press to MUTE the sound; press it again to resume volume. • Long press to enter the EQ Setup menu to adjust the sound settings: CUSTOM ROCK POP JAZZ CLASSIC FLAT. 5 / PLAY/PAUSE Button: In Disc, USB, SD Card mode, press it to pause, press it again to resume playback; long press to stop and press it again to resume playback. 6 / Button: In Disc/USB mode, short press to skip to the previous track; press and hold to fast reverse a track. In Radio mode, short press to skip to previously programmed preset channels; press and hold to auto scan channels backwards. In Bluetooth mode, press to accept an incoming call. • • • 7 • • • / Button: In Disc/USB mode, short press to skip to the next track; press and hold to fast forward a track. In Radio mode, short press to skip to next programmed preset channels; press and hold to auto scan channels forwards. In Bluetooth mode, press to reject an incoming call or hang up after answering a call. 8 VOL Knob / POWER Button: 8 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Product Overview (Cont.) • VOL Knob: Adjust the volume level by turning the knob clockwise to increase or counterclockwise to decrease. • POWER: Press it to turn the unit on or off. 9 LCD Display 10 Microphone 11 AV-IN Jack: Connect an external video device to the AV-IN jack. 12 RELEASE Button: Press to detach and release the front panel. When released the unit will switch off automatically after a few seconds. • Detach the panel: Press the REL button and pull out the left side to detach the panel. • Attach the panel: Insert the left side first and then press the right side until you hear a clicking sound. 13 USB Port (for multimedia playback only): Insert a USB device into this port and the unit will automatically start reading and play back the files (supported music file formats: MP3, WMA). 14 OPEN Button: Press to open and close the TFT monitor. WARNING: Do not obstruct the monitor while in the opening or closing cycle, this may cause damage to the monitor mechanism and is NOT covered under warranty. 15 EJECT Button: Press to eject a disc. If the disc is not removed within 10 seconds after ejecting, the disc will reinsert automatically. 16 TFT Display 17 Anti-Theft LED Light 18 RESET Button: Press it with a thin, sharp object, the device will then be reset to factory default settings. 19 SD/MMC Card Slot (for GPS and multimedia playback files only): Insert the supplied SD card with GPS navigation software for use in GPS mode, or an SD/MMC card with music files, into this slot to play back the card in SD/USB mode (supported music file formats: MP3, WMA). 20 IR Signal Receiver AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 9 Instructions Home Screen The Home screen is the root of the screen hierarchy. It displays when you turn on the car entertainment system. To display the Home screen during use, press the HOME button on the OSD (on-screen display) or on the remote control. The Home screen lets you browse installed Apps and configure the car entertainment system's settings. Simply tap on the touch screen buttons to access all features. The Home screen options are: • Disc – Watch and listen to DVDs and CDs. • GPS – Access the navigation software. • Radio – Listen to FM and AM radio stations. • SD – Media playback from your SD or MMC card. • BT – Pair your mobile phone using Bluetooth wireless technology and make phone calls and listen to music. • USB – Media playback from your USB drive. • AV IN – Watch videos from an external video device. • Wallpaper – Change the home screen wallpaper. • Calendar – Access the calendar. • Setup – Access the unit's setup menu options. • Calculator – Access the calculator. • Clock – Access the clock. • Tools – Access other Apps such as games. 10 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Instructions (Cont.) Disc Mode • To start watching and listening to discs, tap on DISC button. Inserting a disc will begin automatic playback as well. • Tap the TFT screen to display the on-screen playback control options. Tap the screen again to hide the buttons. NOTE! • This unit will only display video if the vehicle is in parking position (the hand brake is engaged). A warning message for driving safety displays if the vehicle is moving. • In Disc mode, the unit will also play picture and music files. Disc Mode Controls STOP button. Touch it to select the previous or next track. PLAY/PAUSE button: In DVD mode, touch it to pause, touch it again to start. In DVD mode, touch it to enter the title menu (only available with discs that support a title menu). In DVD mode, touch it to choose Repeat Chapter Title Repeat Off. In DVD mode, touch it to choose Repeat 1 Directory Repeat All. Repeat Repeat Touch it to go to the next page menu. In VCD mode, touch it to choose PBC ON or OFF. Touch it to enter the GPS mode. AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 11 Instructions (Cont.) GPS Mode • Make sure the supplied GPS antenna is installed during the hardware installation. • Insert the SD card with GPS navigation software into the SD card slot. • Go to Home Setup GPS and click on the Folder Search icon to automatically set the path to the GPS software. ACE-014 will warn you if the SD card with navigation software is not present in the SD card slot. • Tap on the GPS button to start the NDrive navigation software. The first time you select GPS Navigation, a map of Canberra will be displayed on the screen, until a GPS signal is obtained. After a few minutes, the GPS will locate your current position and the map on the screen will change to show your current location. • Tap on the MENU button to access all GPS related options. You can download the NDrive navigation software instruction manual from: http://www.ndrive.com/sites/default/files/UG_V11_PND.pdf • NOTE: Do not remove the SD card with navigation software while in GPS mode. 12 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Instructions (Cont.) Radio Mode • Tap on the Radio button on the on-screen display to enter Radio mode. Touch it to enter the main menu. Touch it to enter GPS mode. Touch this button to enter the selected station. Touch this button to search stations. Touch this button to search stations. Slide the icon to select stations. Touch this button to choose FM1, FM2, FM3, AM1, AM2. Touch this button to select LOC or DX stations. Touch this button to scan the stations from 1-6. Touch and hold this button to save the stations with good reception automatically and scan each station for about 5 seconds. Touch this button to enter the Sound settings. NOTE: The default function is ST/MO when no radio signal is received. As soon as a radio signal is received, the device will automatically convert to ST (stereo) mode. AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 13 Instructions (Cont.) SD/MMC/USB Mode • Insert an SD/MMC card or USB flash drive into the SD/MMC card slot or USB port. Music playback will start automatically. NOTE: Video playback is not supported. • Do not remove the SD/MMC card or USB flash drive while in SD/MMC or USB mode. Always remove the SD/MMC card or USB flash drive while in Home screen or in another mode. NOTE! • Always back up important data from your SD card or USB device before playback on the equipment, as any wrong operation may cause data loss or damage. • We do not assume responsibility for any accidental data loss or damage resulting from failure to back up files. 14 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Instructions (Cont.) Bluetooth® Mode WARNING! Driving and having a telephone conversation at the same time is dangerous. Please park your car before having a telephone conversation. We assume no liability for any eventual injury or damage caused by accidents due to noncompliance with this warning. • Tap on the BT button to access all Bluetooth related functions. Or press and hold the MUTE/BLUETOOTH button on the remote control. • Tap the KEYPAD button to dial the number directly from the OSD. • Tap the HISTORY button to check dialled, received and missed calls. • Tap the PHONEBOOK button to use the phone book functions. • Tap the MUSIC button to start the music player via Bluetooth technology. Bluetooth Pairing • Tap on the BT button the Home screen to access Bluetooth functions. • Tap on the CONNECT tab to enter pairing mode. • On your mobile phone (or another Bluetooth enabled device), enable the Bluetooth function, then search for new devices. (Please refer to the instruction manual of your device for further instructions.) • “ACE-014” should appear in the list on your mobile phone. Select “ACE014”. Some mobile phones require input of an identification code on initial pairing. Enter the default password “1014”. When successfully paired, the display will change from “Not Connect” to “Connected”. • If pairing failed, try to pair again within several seconds. You can refer to the operation instructions for your mobile phone, delete the device it was searching for and pair again. • To remove the pairing, tap the DISCON button or unpair from your device. Auto-Connect / Disconnect • When the unit is powered on, the last paired phone will automatically be connected to the device via Bluetooth. If the device cannot find the paired phone after searching for about one minute, it will stop searching. • When in Standby mode (unconnected), long press the BLUETOOTH button on the remote control to activate the auto-connect function and the device will search the last paired phone. AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 15 Instructions (Cont.) Calling Button To make and receive a call via Bluetooth wireless technology: • Tap the phone number using the numeric buttons, then tap the button to make the call. • Tap the button to hang up. • Tap the button and hold for 3-4 seconds, the device automatically makes a call to the last dialled number. NOTE: T  he phone book only supports western characters. Any difference in character will be shown as +, * or #. Address Book Mode • Tap on the PHONE BOOK button to download your phone's address book to the car entertainment system. • Tap on the PREV PAGE or NEXT PAGE buttons or scroll with your finger to select a number and click on the DIAL UP button to make a call. Call Log Mode • Tap the CALL LOG button to download your phone's call log to the to the car entertainment system. • Tap on the DIALLED/RECEIVED/MISSED buttons to view the history for each category. Scroll with your finger and select a number. • Double-tap on the number to make the call. • Tap on the CLEAR button to clear the data stored on the car entertainment system. Music Mode • Tap the MUSIC button to listen to music in Bluetooth mode. • You can select the function with the PREVIOUS, PLAY/PAUSE, STOP and NEXT buttons, or press the corresponding buttons on the remote control to play/pause, play previous or play next music file. NOTE: Y  our mobile device needs to support A2DP. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners. 16 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Instructions (Cont.) AV IN Mode • Connect the AV IN adaptor cable (not included) to the front AV IN port. • Use a Composite AV cable to connect your external video device to the car entertainment system. • Tap on the AV-1 button to view the picture. Wallpaper Customise the wallpaper on the system, using your own photos, if you wish. Rear View Camera Mode Make sure the rear view camera is installed properly during the hardware installation process. There is no button to access the rear view camera mode. Every time your vehicle is in reverse gear, the image from the rear view camera will automatically display on the screen. Setup Mode Tap on the SETUP button to access the unit's system setup options. All available options are described in detail on the following pages. Clock Mode • Click on the CLOCK button to set the date and time. • Press the left and right arrows to change the time zone. • To manually adjust the time, set GPS Time to OFF. Use the up and down arrows to change the year, month, day, hour and minute values. • Set GPS time to ON to use the time from the GPS signal. • Slide the TIME MODE button left or right to select 12HR or 24HR modes. AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 17 Instructions (Cont.) System Setup Your device has default system settings, which you can customise to suit your personal needs. Once you change settings, your new settings will remain until you change it again. • To change settings, tap on the SETUP button from main menu screen. 1. General Settings Tap the GENERAL button to show the GENERAL menu. • Rear Camera Tap the REAR CAMERA menu to select how the camera image is displayed on the screen: normal or with mirror effect. • Radio Region Select the radio region. The default region is Australia. • Display Backlight Select the backlight brightness: Bright, Normal or Night. • Beep Control Tap the BEEP button to turn on or off. • Calibration Control Calibration of the screen is useful when a malfunction occurs with the touch screen and it needs adjustment. To calibrate the touch screen, proceed as follows: When the target moves to another position, tap and hold at the centre of the new target using the tip of a ballpoint pen. Repeat each time to complete the calibration process and perform a final tap to save all the data. When the calibration has been completed, the device switches back to the previous operating mode and retain the previous setting. • Load Factory Tap on the RESET button to return all settings to the factory default settings. • Start Logo (not applicable to this unit) Tap the START LOGO button to set a password. 18 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Instructions (Cont.) 2. DVD Settings During DVD playback, press the SETUP button to enter into the system settings main menu; press the up or down arrow buttons to move to the highlighted menu item and select one of the setup pages. • Password (not applicable to this unit) The password for this unit is initially set to the factory default 0000. If you want to change your password, you need to enter the old password first and confirm it, and then enter a new password and confirm. WARNING: If you forget your password, there is no possibility to reset the password again. Do not forget your password and write it down or store the password in a safe place. 3. BT Settings • • • • Pairing Code: Under this option you can set the pairing code, the original code is 1014. Auto Connect: Under this option you can turn auto connect ON or OFF. Auto Answer: Under this option you can turn auto answer ON or OFF. Device Name: Shows the Bluetooth pairing name. 4. Sound Settings Tap the SOUND SETTING button to display the SOUND menu. • Loud: Set the loudness setting to ON or OFF. • GPS Volume: Adjust the volume level for GPS voice navigation. • GPS Mix: Turn GPS mix ON or OFF. • Back Car Volume: Change the volume level of the rear speakers. 5. GPS Path Setting Tap the GPS PATH icon to show the GPS PATH menu. • Tap on the file search icon to automatically detect the path to the GPS software. Default path is: \Storage Card2\MobileNavigator\ MobileNavigator.exe 6. System Information • Tap the VERSION INFO button to show the information of the system. You can view detail system information including serial number of the software. AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 19 FAQs If you encounter problems with the equipment, check in the table below and on the next page for possible causes and solutions. If you still cannot solve the problem, contact our after sales support line for advice. Symptom No power. No sound. Poor sound when playing a disc. The operation buttons do not work. The radio does not work, the automatic station selection does not work. 20 Cause Solution Leads and connectors are incorrectly connected. Confirm once more that all connections are correct. Noise and/or other factors are causing the builtin micro-processor to operate incorrectly. Turn off the power, then press the REL button and remove the DCP. Press the RESET button for about 2 seconds with a thin rod. The car ignition switch is not on. Switch the ignition key to “ACC”. The fuse is blown. Replace the fuse. The volume is set to minimum. Adjust the volume to the desired level. The wiring is not properly connected. Get the wiring connection checked. The disc is dirty. Clean the disc and ensure it is not damaged (no scratches). If parked in a humid environment, condensation Leave the player off for an hour droplets may have formed or so, then try again. on the lens. Noise and/or other factors are causing the built-in microcomputer to operate incorrectly. Turn off the power, then press the REL button and remove the DCP. Press the RESET button for about 2 seconds with a thin rod. The faceplate is not properly attached. Ensure the faceplate is properly attached. The radio antenna cable is not connected. Ensure the antenna cable is firmly connected. The signals are too weak. Select a station manually, or move to a location with better reception. www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 FAQs (Cont.) Symptom Cause Solution There is already a disc inside the player. Remove the disc and insert a new one. A disc has been inserted the wrong way. Ensure to insert the disc with the label facing upward. Discs cannot be The CD is very dirty or loaded or ejected. defective. The unit will not start Bluetooth pairing mode. Error message on the LCD display. No GPS signal. GPS navigation software won’t load. AFTER SALES SUPPORT AUS 1300 886 649 Clean the disc, or try playing a different disc. The temperature inside the car is too high. Let the car interior cool and try again. Condensation. Leave the player off for an hour or so, then try again. The unit is already paired to a device. Unpair the already paired mobile device and pair the new one. Error 1: deck mechanism error. Reset the unit. Error 2: disc error. Change the disc or reset the unit. Error 3: USB error. Change the USB drive or reset the unit. Error 4: SD/MMC error. Remove the SD card and insert it again. Using a computer, make sure the SD card and files inside it are not corrupted. GPS antenna was not installed during initial installation. Install GPS antenna. This may be due to weak local GPS satellite signals. Wait for three minutes to receive signals. SD card with navigation software is not inserted into the SD card slot. Insert SD card with navigation software. Set the path to the GPS software ACE-014 cannot locate the (see page 12 to set the GPS path). navigation software. www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 21 Installation Installation Hardware 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 11 22 11 Washer, Spring Washer, M5 Nut Mounting Strap Bolt Screws (4) Mounting Collar (Half Sleeve) Release Key (2) Screw Trim Ring Rubber Cushion Power/Speaker Wiring Harness SD Card www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Installation (Cont.) IMPORTANT: This unit must be installed by a professional technician only or the warranty will be void. • Before starting installation of the unit, make sure the wiring is connected properly and you have read the installation precautions on page 5. • Use only the parts provided with the unit to ensure proper installation. The use of unauthorized parts may cause malfunction. • Install the unit where it does not get in the driver’s way and will not injure the passenger in case there is a sudden stop, like an emergency stop. Wiring Connections AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 23 Installation (Cont.) Important information— read before installation! • Never connect cable to the system while it is connected to the battery power. Whenever the unit is disconnected from the battery, the preset memory will be erased and the unit will go back to its factory defaults. • In order to watch a video, the parking wire must be connected to the parking break signal. Parking Wire This lead must be connected to the power supply side of the parking break switch (Fig. 1). For safety, video images can only be seen when the car's parking break is set to the ON position. (Brown) Fig. 1 Connecting the Reversing Line to the Car's Tail Light Fig. 2 Connect the reversing line as illustrated above (Fig. 2). Then connect one end of the supplied yellow video cable to the camera and the other end to the CAM socket at the back of the unit. After connecting, when you start up the reverse gear, the unit will receive the picture from the car rear view camera. Connecting the GPS Antenna Connect the supplied GPS antenna to the GPS socket at the back of the unit, as illustrated in the wiring diagram on the previous page. 24 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Installation (Cont.) Loudspeaker Connection • • • • • • Only use groundless loudspeakers. Only use loudspeakers with a minimum 40Watt ouput; using a lower wattage may damage the loudspeakers at higher volumes. Use 4~8Ω (Ohm impedance) loudspeakers only; using a higher or lower impedance may damage the unit. Do not use 3-cable loudspeakers and do not connect the loudspeakers' minus to the car body (GND). The unit is using a BTL circuit and each loudspeaker must be connected with insulated cables according to the diagram below. Loudspeaker cables and/or optional external power amplifiers must always be about 30cm away from the antenna and/or antenna extension parts. Connect the speakers according the following diagram, incorrect connections will damage the unit or your loudspeakers. Correct Connection Left front - Right front | Left rear - Right rear Incorrect Connections AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 25 Installation (Cont.) Dashboard Installation Install the car entertainment system as illustrated in Fig. 3 below. • First insert the half sleeve into the hole in the dashboard and bend the mounting tabs outwards to fix it in place. • If necessary, place the mounting strap at the rear of the unit and fix it with the provided washer (Fig. 4). • Push the unit into the half sleeve until it clicks securely into place. • To complete the installation, place the trim ring over the unit (Fig. 5). (The trim ring may not be necessary in some vehicles. If yours does not need it, you may pull it off the system.) Mounting Strap Dashboard Half Sleeve Fig. 4 Trim Ring Release Button Fig. 5 Fig. 3 Removing the Unit Insert the supplied extraction keys into the unit (Fig. 6) and pull the unit out of the dashboard with the extraction keys. Fig. 6 26 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Other Useful Information Disc Handling and Maintenance Tips • Do not use damaged (cracked, warped or scratched) discs. • Hold the disc by the edges so the surface will not be soiled with fingerprints. Fingerprints, dirt and scratches can cause skipping and distortion. • Do not write on the label side with a ball-point pen or other writing utensils. • Do not attach paper or seals to discs. The player may be damaged if there is any exposed glue on discs. Check rental discs, in particular, and ensure there is no exposed glue from extra labels attached to the discs. • Be careful not to drop or bend the disc. • Do not insert more than one disc into the slot. • Do not attempt to play irregularly shaped discs. • Store disc in their exclusive case when not in use. • DO NOT store discs in humid or dusty areas, or where they are exposed to direct sunlight or sources of heat (such as a heating appliance). Cleaning Dirty Discs • If a disc is dirty, wipe the surface gently with a soft cloth, dampened with a little water (no other liquids). • Do not use record cleaning sprays, benzine, thinner or static electricity prevention liquids. • When wiping discs, always move the cloth from the centre hole towards the outside, which will not cause distortion. (If you wipe with a circular motion, circular scratches are likely to occur, which will cause distortion.) • If the disc is brought from a cold to a warm environment, moisture may form on the disc. Wipe this moisture off with a soft, dry, lint-free cloth before using the disc. AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 27 Specifications General Power Supply 12V/10A Current Consumption Max. 10A Maximum Power Output 40W x 4 channels Compatible Formats DVD, SVCD, VCD, HDCD, MP3, MP4, VIDEO, CDDA, Picture CDCD-R/-RW, DVD±R/±RW Dimensions (w x d x h) / Weight 178 x 211 x 50mm / 2.1kg Working Temperature Range -10ºC – +60ºC ESP Function 8 sec. for Audio CD, 120 sec. for MP3 TFT Display Screen Size 7 inch Resolution 800 x 480 pixel Aspect Ratio 4:3 / 16:9 Brightness 400 cd/m2 FM Stereo Radio Preset Memory Stations 18 Audio Specification 20Hz – 20kHz The ® Registered Trademark symbol must be attributed with the following footnote: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Hands (IP) Holdings Pty Ltd is under license. Other trademarks and trade names are those of their respective owners. 28 www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016 Car Entertainment System with Reversing Camera Repair and Refurbished Goods or Parts Notice Unfortunately, from time to time, faulty products are manufactured which need to be returned to the supplier for repair. Please be aware that if your product is capable of retaining user-generated data (such as files stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a portable media player, games saved on a games console or files stored on a USB memory stick) during the process of repair, some or all of your stored data may be lost. We recommend you save this data elsewhere prior to sending the product for repair. You should also be aware that rather than repairing goods, we may replace them with refurbished goods of the same type or use refurbished parts in the repair process. Please be assu red though, refurbished parts or replacements are only used where they meet ALDI’s stringent quality specifications. If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint. Please telephone us on 1300 886 649 or write to us at: Tempo (Aust) Pty Ltd ABN 70 106 100 252 PO BOX 6056 Frenchs Forest, Sydney, Australia NSW 2086 Tempo Help Desk: 1300 886 649 (Aust) (Operating Hours: Mon-Fri 08:30AM to 06:00PM EST) Email: [email protected] AFTER SALES SUPPORT AUS 1300 886 649 www.tempo.org Model: ACE-014 Product Code: 47499 08/2016 29 Warranty returns Should you for any reason need to return this product for a warranty claim, make sure to include all accessories with the product. Product does not work? If you encounter problems with this product, or if it fails to perform to your expectations, make sure to contact our After Sales Support Centre on 1300 886 649 before returning it to the store for a refund. www.tempo.org AUS 1300 886 649 Model: ACE-014 Product Code: 47499 08/2016