Transcript
Discharging Indication Four LED Bars keep on:capacity75-100%; The first three LED Bars keep on:capacity50-75%; The first two LED Bars keep on:capacity25-50%; The first LED Bar keeps on:capacity≤25%;
Specifications Battery Capacity: 14200mAh Battery Cell: Polymer Battery Input: 5V/ 2.1A Input Charging Time: 5-6 Hours Output Total: 5V/3.1A(MAX) Output 1: 5V/3.1A(MAX) Output 1: 5V/3.1A(MAX) Cycle Life: Over 500 TIMES Powering On and Off The CASEPOWER 14200 Battery will automatically turn on when a device is connected. Unit will automatically turn off after being unplugged from charger. Charging Your Battery Connect the micro USB end fo the included charging cable into the external battery input port.Insert the USB end into a compatible wall charger, car charger or computer USB port and battery will begin to charge.Unit will automatically turn off after being unplugged.
75-100%
50-75%
25-50%
≤25%
Proper Use and Safety Read the following information before using external battery. Charging time for battery depends on charging method used. Do not pierce or mechanically damage the battery. Do not expose battery to heat over 45℃（113℉）.Never throw into water, chemical solvents or fire. Use for intended purpose only. Do not disassemble or modify battery. Stop using battery immediately if it begins to smoke, a strange smell appears, battery leaks or distorts in any way. Not for children. Recycle When your battery is no longer pumping up your devices, please recycle it responsibly so it can live again. The lithium polymer batteries contained in external battery packs should not be tossed out with everyday refuse. Doing so could harm the environment. Team Casepower suggests that you recycle your battery responsibly. Many cities offer battery recycling services. Regulations may vary per municipality or state.
Charging Your Devices The external battery has two output ports,connect the USB power cable to one of the USB output ports on the battery. And battery will automatically turn on when cable and device are connected to the output port.
Contact us For questions,inquiries or comments concerning our products,please email
[email protected] .Additional product information can be found online at www.case-power.com
Charging Your Devices Connect the USB end of the cable to the USB output port of the external battery, insert the other end of the cable to the input port of the device, the external battery will turn on automatically.
Warranty Casepower provides our customers with a 12 month warranty from the date of purchase. Please contact
[email protected] for terms and to learn more.
Charging Indication The first LED Bar flicker:capacity:≤25%; The second LED Bar flicker:capacity:25-50%; The third LED Bar flicker:capacity:50-75%; The fourth LED Bar flicker:capacity:75-100%.
CASEPOWER 14200
For more information visit us at case-power.com
≤25%
25-50%
50-75%
75-100%
