Cast Centerset Faucets 4" Centers

Transcript

Cast Centerset Faucets 4" Centers Specification: (example) 21C144 21C143 • HEAVY DUTY CAST BRASS centerset faucet • 102mm (4") centers, two handle • polished chrome plated finish with polished underspout • metal hold-down package • color indexed metal handles with vandal resistant screws • CER-TECK® 1/4 turn ceramic structures and … with … (add product variation required) with … (add outlet required) with … (add handle required) with … (add suffix -TI if required – See Back Page) Engineer/Architect Approval Model Specified: Approval: DESCRIPTION PRODUCT NO. 4" Centerset Faucet ® 21C PRODUCT VARIATION HANDLE OUTLET 4 0 Date: 4 4 0 0 1 1 Five Flute Handles 2 102mm (4") Hooded Blade Handles (1) 1 Standard Product Less Pop-up (No Pop-up Hole) 2 Standard Product With Metal Pop-up 2 Vandal Resistant 1.5 USGPM (5.7 L/min.) Laminar w/Agion® Antimicrobial 3 Standard Product with Cast Open Grid Strainer (No Pop-up Hole) 3 Vandal Resistant 1.5 USGPM (5.7 L/min.) Flow Control Aerator 3 76mm (3") Lever Blade Handles (1) 4 Standard Product With Cast Offset Open Grid Strainer (No Pop-up Hole) 4 Standard 1.5 USGPM (5.7 L/min.) Flow Control Aerator 4 102mm (4") Blade Handles, Sanitary Hoods (1) 5 Standard Product With Chain Stay Less Plug & Chain 5 Vandal Resistant 0.5 USGPM (1.9 L/min.) Flow Control Non-Aerating Spray Outlet 5 152mm (6") Wrist Handles, Sanitary Hoods 6 6 6 7 7 7 8 8 8 76mm (3") Self-Closing Lever Blade Handles 9 9 9 Five Flute Self-Closing Handles See Series 27C4, 27C5 for 4" Gooseneck Spout Centersets. (1) H & C Temperature Indicator available. Add suffix –TI. Refer to www.specselect.com for individual models. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Flow Rates are at 60 PSI. Note: Use this page front and back as a product submittal sheet. CDSP–21C Page 1.C.1 CDSP–21C Cast Centerset Faucets 4" Centers Approvals: • CSA certified • Complies to ASME A112.18.1 • Lever Blade Handle No. 2, 3, 4 and 5 ADA Compliant and meet Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. • IAPMO listed (Contact Delta Representative for State and/or Local Approvals.) FRONT VIEW 135mm (5.3") 152mm (6.0") 1 & 9 85mm (3.4") 141mm (5.5") 96mm (3.77") 9 ( 2 102mm (4.0") HANDLE TEMPERATURE INDICATORS 89mm (3.5") 102mm (4.0") 95mm (3.7") Add suffix “-TI” to Product Number for handle temperature indicators “H” (red), “C” (blue). Availaible on handle options 2, 3 or 4 only. 117mm (4.6") 4 3 & 8 76mm (3.0") 25mm (1") DIA. MIN. 76mm (3.0") FLOW (USGPM) Outlet Flow Rates 2.5 8 SIDE VIEW RP5651 POP-UP Pop-Up METAL (supplied with Product Variation 2) 2 7 6 1.5 D 5 4 3 1 2 .5 0 10 20 30 40 50 60 Line Pressure (psig) 70 80 66mm (2.6") 23 0 86mm (3.375") 130mm (5.1") 2 3 4 5 OPEN GRID STRAINER in. 0.45 0.45 0.45 0.45 57mm (2.25") DIA. 57mm (2.25") MAX. 32mm (1.25") Dia. OFFSET OPEN GRID STRAINER (supplied with Product Variation 4) 57mm (2.25") DIA. 51mm (2.0") MAX 282mm (11.0") 194mm (7.63") 216mm (8.5") INLETS - 1/2" MIP/Coupling Nuts 32mm (1.25") 35mm (1.375") Dia. 118mm (4.625") 56mm (2.2") (supplied with Product Variation 3) “D” mm 11 11 11 11 42mm (1.625") to 61mm (2.375") No. 3 & 4 Aerator No. 5 Low Flow Outlet CAST SPOUT OUTLET no. 54mm (2.125") Dia. 91mm (3.6") Spout Outlets No. 2 Laminar Flow Outlet 22T 169mm (6.64") INLETS: 1/2" MIP/COUPLING NUTS 9 1 0 44mm (1.75") MAX. DECK THICKNESS 102mm (4.0") FLOW RATE vs PRESSURE FLOW (l/min.) 5 130mm (5.1") 32mm (1.25") Note: Measurements may vary ± 6mm (0.25") Refer to www.specselect.com for individual models. Page 1.C.2 CDSP–21C CDSP–21C Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Cast Centerset Faucets 4" Centers Specification: (example) 21T144 21T143 • HEAVY DUTY CAST BRASS centerset faucet • 102mm (4") centers, two handle • polished chrome plated finish with polished underspout • metal hold-down package • color indexed metal handles with vandal resistant screws • TUF-TECK® compression structures and … with … (add product variation required) with … (add outlet required) with … (add handle required) with … (add suffix -TI if required – See Back Page) Engineer/Architect Approval Model Specified: Approval: DESCRIPTION PRODUCT NO. 4" Centerset Faucet ® 21T PRODUCT VARIATION HANDLE OUTLET 4 0 Date: 4 0 4 0 1 Vandal Resistant 1.9 USGPM (7.2 L/min.) Flow Control Rosespray 1 Five Flute Handles 2 102mm (4") Hooded Blade Handles (1) 1 Standard Product Less Pop-up (No Pop-up Hole) 2 Standard Product With Metal Pop-up 2 Vandal Resistant 1.5 USGPM (5.7 L/min.) Laminar w/Agion® Antimicrobial 3 Standard Product with Cast Open Grid Strainer (No Pop-up Hole) 3 Vandal Resistant 1.5 USGPM (5.7 L/min.) Flow Control Aerator 3 76mm (3") Lever Blade Handles (1) 4 Standard Product With Cast Offset Open Grid Strainer (No Pop-up Hole) 4 Standard 1.5 USGPM (5.7 L/min.) Flow Control Aerator 4 102mm (4") Blade Handles, Sanitary Hoods (1) 5 Standard Product With Chain Stay Less Plug & Chain 5 Vandal Resistant 0.5 USGPM (1.9 L/min.) Flow Control Non-Aerating Spray Outlet 5 152mm (6") Wrist Handles, Sanitary Hoods 6 6 6 7 7 7 8 8 8 76mm (3") Self-Closing Lever Blade Handles 9 9 9 Five Flute Self-Closing Handles See Series 27T4 & 27T5 for 4" Gooseneck Spout Centersets. (1) H & C Temperature Indicator available. Add suffix –TI. Refer to www.specselect.com for individual models. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Flow Rates are at 60 PSI. Note: Use this page front and back as a product submittal sheet. DSP–21T Page 1.C.3 DSP–21T Cast Centerset Faucets 4" Centers Approvals: • CSA certified • Complies to ASME A112.18.1 • Lever Blade Handle No. 2, 3, 4 and 5, ADA Compliant and meet Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. • IAPMO listed (Contact Delta Representative for State and/or Local Approvals.) FRONT VIEW 135mm (5.3") 152mm (6.0") 1 & 9 85mm (3.4") 141mm (5.5") 96mm (3.77") 9 ( 2 102mm (4.0") HANDLE TEMPERATURE INDICATORS Add suffix “-TI” to Product Number for 89mm (3.5") 102mm (4.0") 95mm (3.7") handle temperature indicators “H” (red), “C” (blue). Availaible on handle options 2, 3 or 4 only. 5 117mm (4.6") 4 3 & 8 76mm (3.0") 25mm (1") DIA. MIN. 76mm (3.0") FLOW RATE vs PRESSURE FLOW (l/min.) FLOW (USGPM) Outlet Flow Rates 2.5 8 SIDE VIEW RP5651 POP-UP Pop-Up METAL (supplied with Product Variation 2) 2 7 6 1.5 D 5 4 3 1 2 .5 0 10 20 30 40 50 Line Pressure (psig) 60 70 80 66mm (2.6") 23 0 86mm (3.375") 130mm (5.1") 1 2 3 4 5 OPEN GRID STRAINER (supplied with Product Variation 3) in. 0.75 0.45 0.45 0.45 0.45 57mm (2.25") DIA. 57mm (2.25") MAX. 32mm (1.25") Dia. OFFSET OPEN GRID STRAINER (supplied with Product Variation 4) 57mm (2.25") DIA. 51mm (2.0") MAX 282mm (11.0") 194mm (7.63") 216mm (8.5") INLETS - 1/2" MIP/Coupling Nuts 32mm (1.25") 35mm (1.375") Dia. 118mm (4.625") 56mm (2.2") No. 3 & 4 Aerator “D” mm 19 11 11 11 11 42mm (1.625") to 61mm (2.375") No. 5 Low Flow Outlet No. 2 Laminar Flow Outlet CAST SPOUT OUTLET no. 54mm (2.125") Dia. 91mm (3.6") Spout Outlets No. 1 Rose Spray 22T 169mm (6.64") INLETS: 1/2" MIP/COUPLING NUTS 9 1 0 44mm (1.75") MAX. DECK THICKNESS 102mm (4.0") 130mm (5.1") 32mm (1.25") Note: Measurements may vary ± 6mm (0.25") Refer to www.specselect.com for individual models. Page 1.C.4 DSP–21T DSP–21T Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Single Control Cast Lavatory Faucets Specification: (example) Specification: (example) CAST BRASS centerset faucet Single control, 102mm (4") centers polished chrome plated finish ceramic cartridge with rotational limit stop Metal hold-down package vandal resistant 89mm (3 1/2") ADA compliant lever handle with color index 22C101 and … with … (add product variation required) with … (add outlet required) • CAST BRASS single control lavatory faucet • Single hole mount Metal hold-down package • Polished chrome plated finish • ceramic cartridge with rotational limit stop • vandal resistant 89mm (3 1/2") ADA compliant lever handle with color index, and … with … (add product variation required) with … (add outlet required) • • • • • • 22C601 Engineer/Architect Approval Model Specified: Approval: DESCRIPTION PRODUCT NO. Single Control Centerset Faucet 22C ® 1 PRODUCT VARIATION HANDLE OUTLET 4 4 0 102mm (4") Centerset Less Pop-up (with Pop-up hole) 0 1 102mm (4") Centerset Less Pop-up (No Pop-up hole) 1 2 Date: Vandal Resistant Outlet (Wrench Flats) 1.5 USGPM (5.7 L/min) 4 0 1 2 Vandal Resistant 1.5 USGPM (5.7 L/min.) Laminar w/Agion® Antimicrobial 2 3 102mm (4") Centerset with Metal Pop-up 3 Vandal Resistant 1.5 USGPM (5.7 L/min.) Flow Control Aerator 3 4 102mm (4") Centerset with Open Grid Strainer (No Pop-up hole) 4 Standard 1.5 USGPM (5.7 L/min.) Flow Control Aerator 4 5 102mm (4") Centerset with Offset Grid Strainer (No Pop-up hole) 5 Vandal Resistant 0.5 USGPM (1.9 L/min.) Flow Control Non-Aerating Spray Outlet 5 6 Single Hole Mount Less Pop-up (No Pop-up hole) 6 6 7 7 7 8 Single Hole Mount with Metal Pop-up 8 8 9 Single Hole Mount with Open Grid Strainer (No Pop-up hole) 9 9 Refer to www.specselect.com for individual models. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. 89mm (3-1/2") ADA Compliant Lever Handle Flow Rates are at 60 PSI. Note: Use this page front and back as a product submittal sheet. DSP–22C Rev. B DSP–22C Page Rev. 1.C.5 B Single Control Cast Lavatory Faucets Approvals: 89mm (3.5") • CSA certified • Complies to ASME A112.18.1 • Complies to ASME A112.18.6 for Flex Connector Models • ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. • IAPMO listed • Verified compliant with .25% weighted average Pb content regulations (Contact Delta Representative for State and/or Local Approvals.) 140mm (5.51") 178mm (7") D 70mm (2.75") 30mm (1.2") minimum dia. 45mm (1.77") maximum dia. 56mm (2.13") maximum deck thickness 390mm (15.35") Flexible S.S. Hose 3/8" Compression Connectors 135mm (5.32") 89mm (3.5") 165mm (6.5") 170mm (6.69") FLOW RATE vs PRESSURE FLOW (l/min.) FLOW (USGPM) Outlet Flow Rates 2.5 71mm (2.8") 9 8 152mm (5.98") D 2 7 6 1.5 4 3 1 2 .5 1 0 0 0 10 20 30 40 50 Line Pressure (psig) 60 70 80 49mm (1.93") 25mm (1") DIA. 5 INLETS - 1/2" MIP/Coupling Nuts 102mm (4") centres 146mm (5.75") metal Pop-Up POP-UP RP5651 54mm (2.125") Dia. No. 5 Low Flow Outlet No. 3 & 4 Aerator 54mm (2.125") Dia. 0 2 3 4 5 104.7mm (4.125") 32mm (1.25") Dia. OPEN GRID STRAINER (supplied with Product Variation 4 and 9) 57mm (2.25") DIA. 57mm (2.25") MAX. 32m (1.2 Di OFFSET OPEN GRID STRAINER (supplied with Product Variation 5) 57mm (2.25") DIA. 51mm (2.0") MAX 216mm (8.5") 32mm (1.25") Note: Measurements may vary ± 6mm (0.25") Refer to www.specselect.com for individual models. Page 1.C.6 DSP–22C Rev. B DSP–22C Rev. B 42mm (1.625") to 79.3mm (3.125" 111mm (4.375") 35mm (1.375") Dia. 32mm (1.25") max. deck thickness 118mm 49mm (4.625") (1.93") “D” mm in. 7 0.28 11 0.45 11 0.45 11 0.45 11 0.45 RP27575 Po 42mm (1.625") to 61mm (2.375") 86mm (3.375") OUTLET no. 44mm (1.73") (supplied with Product Variation 3 and 8) Spout Outlets No. 0 & 2 Outlet 22T 30mm (1.18") max. deck thickness 282mm (11.0") 194mm (7.63") 130mm (5.1") 32mm (1.25") Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Widespread Lavatory Faucets 6"-12" Centers Specification: (example) 23C334 • two handle widespread lavatory faucet • 152 to 305mm (6" to 12") adjustable centers • polished chrome plated finish trim • CAST BRASS bodies • 4 1/2" cast BRASS spout or 3/8" IPS Brass Pipe Rigid/Swivel Gooseneck Spout • metal hold-down package • color indexed metal handles with vandal resistant screws • CER-TECK® 1/4 turn ceramic structures and … with … (add product variation required) with … (add outlet required) with … (add handle required) with … (add suffix -LS if required – See Back Page) with … (add suffix -TI if required – See Back Page) DESCRIPTION 23C644 Engineer/Architect Approval Model Specified: Approval: Date: PRODUCT NO. Widespread Lavatory Faucet ® 23C PRODUCT VARIATION HANDLE OUTLET 4 4 4 0 0 0 1 1 1 Five Flute Handles 2 Vandal Resistant 1.5 USGPM (5.7 L/min.) Laminar w/Agion® Antimicrobial 2 102mm (4") Hooded Blade Handles (4) 2 3 Cast Spout Less Pop-up (No Pop-up Hole) 3 Vandal Resistant 1.5 USGPM (5.7 L/min.) Flow Control Aerator 3 76mm (3") Lever Blade Handles (4) 4 Cast Spout With Metal Pop-up (With Pop-up Hole) 4 Standard 1.5 USGPM (5.7 L/min.) Flow Control Aerator 4 102mm (4") Blade Handles, Sanitary Hoods (4) 5 Vandal Resistant 0.5 USGPM (1.9 L/min.) Flow Control Non-Aerating Spray Outlet 5 152mm (6") Wrist Handles, Sanitary Hoods 5 6 Heavy Duty Rigid/Swivel Inline (R2) Gooseneck Spout Less Pop-up (1) (3) 6 6 Smooth End, Laminar Flow Control in Base of Gooseneck Spout 1.1 USGPM (4.2L/min.) (2) 7 7 8 8 8 9 9 9 (1) Available Optional Rigid/Swivel Spouts. These spouts can ONLY be added to BASIC PRODUCT Option No. 6. (2) This outlet can ONLY be added to BASIC PRODUCT Option No. 6. (3) 120º Limited Swing Spout available. Add Suffix -LS. Refer to www.specselect.com for individual models. 7 76mm (3") Self-Closing Lever Blade Handles Flow Rates are at 60 PSI. (4) H & C Temperature Indicator available. Add suffix –TI. Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. CDSP–23C Page 1.C.7 CDSP–23C Widespread Lavatory Faucets 6"-12" Centers Approvals: • CSA certified • Complies to ASME A112.18.1 • Lever Handle No. 2, 3, 4, and 5, ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. • IAPMO listed (Contact Delta Representative for State and/or Local Approvals.) FRONT VIEWS 96mm (3.77") 102mm (4.0") 2 ① 1 3 & 8 73mm (2.9") 63mm (2.5") 76mm (3.0") 53mm (2.1") 89mm (3.5") 102mm (4.0") HANDLE TEMPERATURE INDICATORS  dd suffix “-TI” to Product Number for A handle temperature indicators “H” (red), “C” (blue). Availaible on handle options 2, 3 or 4 only. 4 5 97mm (3.8") 51mm (2.0") 135mm (5.3") 152mm (6.0") 32mm (1.25") MIN. **3 HOLES *305mm 27mm (1.06") MAX 152mm (6.0") 118mm (4.7") (12.0") * CAN BE CUT IN FIELD TO 152mm (6.0") MINIMUM INLET FOR 3/8" OR 1/2" FLEXIBLE RISER OR 1/2-14 NPSM COUPLING NUT (SUPPLIED) FLOW RATE vs PRESSURE Outlet Flow Rates FLOW (l/min.) FLOW (USGPM) 8 2 Outlets #2, 3, 4, 5 7 6 CAST SPOUT GOOSENECK SPOUT #6 2.5 9 1.5 114mm (4.5") Outlet #7 C A 5 A C 51mm D (2") D 4 3 1 2 .5 0 10 20 30 40 50 Line Pressure (psig) 60 70 80 0 Spout Outlets No. 3 & 4 Aerator No. 2 Laminar Flow Outlet No. 5 Low Flow Outlet OUTLET no. 2 3 4 5 No. 7 Flow Control gooseneck SPOUT “D” mm in. 18 18 17 18 0.69 0.69 0.67 0.69 26mm (1.01") 10° 44mm (1.75") 26mm (1.01") 22T 44mm (1.75") **Spout hole 38mm (1.5") maximum diameter. RP5651POP-UP Pop-Up METAL (supplied with Product Variations 4) Cast spout “D” mm in. 11 11 11 11 0.45 0.45 0.45 0.45 LIMITED SWING GOOSENECK Add suffix “- LS” to Product Number for 120° Limited Swing – Available on #6 Product Variation ONLY INLETS - 1/2" MIP/Coupling Nuts Note: Measurements may vary ± 6mm (0.25") Refer to www.specselect.com for individual models. Page 1.C.8 CDSP–23C 44mm (1.75") 66mm (2.6") L L 1 0 (Extension Kit Available for up to 1 1/4" Thick Decks) CDSP–23C FOR OPTIONAL RIGID/SWIVEL & LIMITED SWING SPOUTS 54mm (2.125") Dia. 42mm (1.625") to 61mm (2.375") 86mm (3.375") See DSP-R/S for detailed specification (Found in the “Add-On Option” section when using the printed spec binder) 35mm (1.375") Dia. 118mm (4.625") 32mm (1.25") Dia. GOOSENECK SPOUT ASSEMBLIES SPOUT/OUTLET Gooseneck-Standard (R2) for outlets #2, 3, 4, 5 Gooseneck-Standard (R2) for outlet #7 “A” “C” “L” mm in. mm in. mm in. 114 4.5 104 4.1 170 6.7 114 4.5  97 3.8 178 7.0 Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Widespread Lavatory Faucets 6"-12" Centers Specification: (example) 23T334 • two handle widespread lavatory faucet • 152 to 305mm (6" to 12") adjustable centers • polished chrome plated finish trim • CAST BRASS bodies • 4 1/2" cast BRASS spout or 3/8" IPS Brass Pipe Rigid/Swivel Gooseneck Spout • metal hold-down package • color indexed metal handles with vandal resistant screws • TUF-TECK® compression structures and … with … (add product variation required) with … (add outlet required) with … (add handle required) with … (add suffix -LS if required – See Back Page) with … (add suffix -TI if required – See Back Page) DESCRIPTION 23T644 Engineer/Architect Approval Model Specified: Approval: Date: PRODUCT NO. Widespread Lavatory Faucet ® 23T PRODUCT VARIATION HANDLE OUTLET 4 4 4 0 0 1 1 Vandal Resistant 1.9 USGPM (7.2 L/min.) Flow Control Rosespray 1 Five Flute Handles 2 Vandal Resistant 1.5 USGPM (5.7 L/min.) Laminar w/Agion® Antimicrobial 2 102mm (4") Hooded Blade Handles (4) 2 0 3 Cast Spout Less Pop-up (No Pop-up Hole) 3 Vandal Resistant 1.5 USGPM (5.7 L/min.) Flow Control Aerator 3 76mm (3") Lever Blade Handles (4) 4 Cast Spout With Metal Pop-up (With Pop-up Hole) 4 Standard 1.5 USGPM (5.7 L/min.) Flow Control Aerator 4 102mm (4") Blade Handles, Sanitary Hoods (4) 5 Vandal Resistant 0.5 USGPM (1.9 L/min.) Flow Control Non-Aerating Spray Outlet 5 152mm (6") Wrist Handles, Sanitary Hoods 5 6 Heavy Duty Rigid/Swivel Inline (R2) Gooseneck Spout Less Pop-up (1) (3) 6 6 Smooth End, Laminar Flow Control in Base of Gooseneck Spout 1.1 USGPM (4.2L/min.) (2) 7 7 8 8 8 9 9 9 (1) Available Optional Rigid/Swivel Spouts. These spouts can ONLY be added to BASIC PRODUCT Option No. 6. (2) This outlet can ONLY be added to BASIC PRODUCT Option No. 6. (3) 120˚ Limited Swing Spout available. Add Suffix -LS. Refer to www.specselect.com for individual models. 7 76mm (3") Self-Closing Lever Blade Handles Flow Rates are at 60 PSI. (4) H & C Temperature Indicator available. Add suffix –TI. Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP–23T Page 1.C.9 DSP–23T Widespread Lavatory Faucets 6"-12" Centers Approvals: • CSA certified • Complies to ASME A112.18.1 • Lever Handle No. 2, 3, 4, and 5, ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. • IAPMO listed (Contact Delta Representative for State and/or Local Approvals.) FRONT VIEWS 96mm (3.77") 102mm (4.0") 2 ① 1 3 & 8 73mm (2.9") 63mm (2.5") 76mm (3.0") 53mm (2.1") 89mm (3.5") 102mm (4.0") HANDLE TEMPERATURE INDICATORS  dd suffix “-TI” to Product Number for A handle temperature indicators “H” (red), “C” (blue). Availaible on handle options 2, 3 or 4 only. 4 5 97mm (3.8") 51mm (2.0") 135mm (5.3") 152mm (6.0") 32mm (1.25") MIN. **3 HOLES *305mm 27mm (1.06") MAX 152mm (6.0") 118mm (4.7") (12.0") FLOW RATE vs PRESSURE Outlet Flow Rates FLOW (l/min.) FLOW (USGPM) * CAN BE CUT IN FIELD TO 152mm (6.0") MINIMUM INLET FOR 3/8" OR 1/2" FLEXIBLE RISER OR 1/2-14 NPSM COUPLING NUT (SUPPLIED) 2.5 2 7 6 Outlets #2, 3, 4, 5 1.5 5 1 2 .5 1 0 0 0 10 20 30 40 50 Line Pressure (psig) 60 70 80 Spout Outlets No. 3 & 4 Aerator No. 1 Rose Spray No. 2 Laminar Flow Outlet No. 5 Low Flow Outlet No. 7 Flow Control OUTLET no. 1 2 3 4 5 A C 51mm D (2") D L L 44mm (1.75") 26mm (1.01") 66mm (2.6") 44mm (1.75") 10° 26mm (1.01") 22T 44mm (1.75") **Spout hole 38mm (1.5") maximum diameter. RP5651POP-UP Pop-Up METAL (supplied with Product Variations 4 & 7) gooseneck SPOUT “D” mm in. 17 18 18 17 18 0.67 0.69 0.69 0.67 0.69 Cast spout “D” mm in. 19 11 11 11 11 0.75 0.45 0.45 0.45 0.45 LIMITED SWING GOOSENECK Add suffix “- LS” to Product Number for 120º Limited Swing – Available on #6 Product Variation ONLY INLETS - 1/2" MIP/Coupling Nuts Note: Measurements may vary ± 6mm (0.25") Refer to www.specselect.com for individual models. Page 1.C.10 DSP–23T 114mm (4.5") Outlet #7 C A 4 3 CAST SPOUT GOOSENECK SPOUT #6 9 8 (Extension Kit Available for up to 1 1/4" Thick Decks) DSP–23T FOR OPTIONAL RIGID/SWIVEL & LIMITED SWING SPOUTS See DSP-R/S for detailed specification (Found in the “Add-On Option” section when using the printed spec binder) 54mm (2.125") Dia. 42mm (1.625") to 61mm (2.375") 86mm (3.375") 35mm (1.375") Dia. 118mm (4.625") 32mm (1.25") Dia. GOOSENECK SPOUT ASSEMBLIES SPOUT/OUTLET Gooseneck-Standard (R2) for outlets #2, 3, 4, 5 Gooseneck-Standard (R2) for outlet #7 “A” “C” “L” mm in. mm in. mm in. 114 4.5 104 4.1 170 6.7 114 4.5  97 3.8 178 7.0 Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Single Basin Faucet Specification: (example) • CAST BRASS single basin faucet • polished chrome plated • CER-Teck® 1/4 turn ceramic structure • color indexed metal handle with vandal resistant screw • metal hold-down package and … with … (add outlet required) with … (add handle required) 23C1053 23C1041 Engineer/Architect Approval Model Specified: Approval: DESCRIPTION PRODUCT NO. Single Basin Faucet 23C1 NOT APPLICABLE 0 1 Date: 0 ® HANDLE OUTLET 4 4 4 4 0 0 1 1 Five Flute Handle 2 2 Vandal Resistant 1.5 USGPM (5.7 L/min.) Laminar w/Antimicrobial By Agion® 3 3 Vandal Resistant 1.5 USGPM (5.7 L/min.) Flow Control Aerator 3 4 4 Standard 1.5 USGPM (5.7 L/min.) Flow Control Aerator 4 5 5 Vandal Resistant 0.5 USGPM (1.9 L/min) Flow Control Non-Aerating Spray Outlet 5 6 6 6 7 7 7 8 8 8 70mm (2-3/4") Self-closing Lever Blade Handle 9 9 9 Five Flute Self-closing Handle Refer to www.specselect.com for individual models. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. 2 70mm (2-3/4") Lever Blade Handle Flow Rates are at 60 PSI. Note: Use this page front and back as product a submittal sheet. CDSP–23C10 CDSP–23C10 Page 1.C.11 Single Basin Faucet Approvals: FRONT VIEW • CSA certified • Complies to ASME A112.18.1 • Lever Blade Handle No. 3, ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. • IAPMO listed (Contact Delta Representative for State and/or Local Approvals.) 48mm (1.88") 41mm (1.62") 32mm (1.25") MAX. 15° INLET FOR 3/8" OR 1/2" FLEXIBLE RISER OR 1/2-14 NPSM COUPLING NUT (SUPPLIED) SIDE VIEW FLOW RATE vs PRESSURE Outlet Flow Rates FLOW (l/min.) FLOW (USGPM) Handle No. 1 and 9 2.5 Handle No. 3 and 8 70mm (2.75") 9 8 2 7 6 1.5 5 4 3 48mm (1.88") 2 1 0 0 10 20 30 40 50 32mm Line Pressure (psig) (1.25") MAX. 60 R 3/8" OR 1/2" FLEXIBLE RISER 75mm (3.0") 25mm 32mm (1.0") MIN. (1.25") MAX. 25mm (1.0") MIN. .5 41mm 0 (1.62") 70 80 Spout Outlets No. 2 Laminar Flow Outlet 79mm (3.1") 1 No. 3 & 4 Aerator No. 5 Low Flow Outlet 15 87mm (3.41") 15 87mm (3.41") INLET FOR 3/8" OR 1/2" FLEXIBLE RISER PSM COUPLING NUT (SUPPLIED) OR 1/2-14 NPSM COUPLING NUT (SUPPLIED) Note: Measurements may vary ± 6mm (0.25") Refer to www.specselect.com for individual models. Page 1.C.12 CDSP–23C10 CDSP–23C10 Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Single Basin Faucet Specification: (example) • CAST BRASS single basin faucet • polished chrome plated • Tuf-Teck® institutional structure • color indexed metal handle with vandal resistant screw • metal hold-down package and … with … (add outlet required) with … (add handle required) 23T1053 23T1041 Engineer/Architect Approval Model Specified: Approval: DESCRIPTION PRODUCT NO. Single Basin Faucet 23T1 NOT APPLICABLE 0 1 Date: 0 ® HANDLE OUTLET 4 4 4 4 0 0 1 1 Five Flute Handle 2 2 Vandal Resistant 1.5 USGPM (5.7 L/min.) Laminar w/Antimicrobial By Agion® 3 3 Vandal Resistant 1.5 USGPM (5.7 L/min.) Flow Control Aerator 3 4 4 Standard 1.5 USGPM (5.7 L/min.) Flow Control Aerator 4 5 5 Vandal Resistant 0.5 USGPM (1.9 L/min) Flow Control Non-Aerating Spray Outlet 5 6 6 6 7 7 7 8 8 8 70mm (2-3/4") Self-closing Lever Blade Handle 9 9 9 Five Flute Self-closing Handle Refer to www.specselect.com for individual models. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. 2 70mm (2-3/4") Lever Blade Handle Flow Rates are at 60 PSI. Note: Use this page front and back as product a submittal sheet. DSP–23T10 Page DSP–23T10 1.C.13 Single Basin Faucet Approvals: FRONT VIEW • CSA certified • Complies to ASME A112.18.1 • Lever Blade Handle No. 3, ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force. • IAPMO listed (Contact Delta Representative for State and/or Local Approvals.) 48mm (1.88") 41mm (1.62") 32mm (1.25") MAX. 15° INLET FOR 3/8" OR 1/2" FLEXIBLE RISER OR 1/2-14 NPSM COUPLING NUT (SUPPLIED) SIDE VIEW FLOW RATE vs PRESSURE Outlet Flow Rates FLOW (l/min.) FLOW (USGPM) Handle No. 1 and 9 2.5 Handle No. 3 and 8 70mm (2.75") 9 8 2 7 6 1.5 5 4 3 48mm (1.88") 2 1 0 0 10 20 30 40 50 32mm Line Pressure (psig) (1.25") MAX. 60 R 3/8" OR 1/2" FLEXIBLE RISER 75mm (3.0") 25mm 32mm (1.0") MIN. (1.25") MAX. 25mm (1.0") MIN. .5 41mm 0 (1.62") 70 80 Spout Outlets No. 2 Laminar Flow Outlet 79mm (3.1") 1 No. 3 & 4 Aerator No. 5 Low Flow Outlet 15 15 87mm (3.41") 87mm (3.41") INLET FOR 3/8" OR 1/2" FLEXIBLE RISER PSM COUPLING NUT (SUPPLIED) OR 1/2-14 NPSM COUPLING NUT (SUPPLIED) Specification: (Example) o 23T101 Pair of single hole mount, cast brass, polished chrome plated finish, basin faucets, Tuf-Teck® institutional structure, color indexed five flute metal handle with vandal resistant screw and 1.5 USGPM (5.7 L/min) at 60 PSI aerator outlet. (2 x 23T1041) o 23T24A As above but with self-close handle. (2 x 23T1049) INLETS - 1/2" MIP/Coupling Nuts Note: Measurements may vary ± 6mm (0.25") Refer to www.specselect.com for individual models. Page 1.C.14 DSP–23T10 DSP–23T10 Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Single Control Widespread Faucet Specification: (example) 24T2643 • widespread single control faucet • 102 to 406mm (4" to 16") adjustable centers • polished chrome plated finish • DELTA® washerless stainless steel ball • high temperature limit stop • 3/8" IPS Brass Pipe Rigid/Swivel Gooseneck spout • metal trim, colour indexed vandal resistant lever blade handle and … with … (add product variation required) with … (add outlet required) with … (add handle required) with … (add suffix -LS if required – See Back Page) DESCRIPTION Engineer/Architect Approval Model Specified: Approval: PRODUCT NO. Single Control Widespread Faucet Control Unit Only 24T2 24T0 PRODUCT VARIATION ® ® 0 0 HANDLE OUTLET 4 0 Date: 4 0 For Control Unit ONLY, Select This 1 For Control Unit ONLY, Select This 1 4 0 1 2 2 Vandal Resistant 1.5 USGPM (5.7 L/min.) Laminar w/Antimicrobial By Agion® 3 3 Vandal Resistant 1.5 USGPM (5.7 L/min.) Flow Control Aerator 3 4 4 Standard 1.5 USGPM (5.7 L/min.) Flow Control Aerator 4 5 5 Vandal Resistant 0.5 USGPM (1.9 L/min) Flow Control Non-Aerating Spray Outlet 5 6 Heavy Duty (R2) Rigid/Swivel Gooseneck Spout (1) (2) 4 6 2 70mm (2.75") Lever Blade Handle 152mm (6") Lever Blade Handle 6 Smooth End, Laminar Flow Control in Base of Gooseneck Spout 1.1 USGPM (4.2 L/min.) 7 7 8 8 8 9 9 9 (1) Optional Rigid/Swivel Spouts available. (2) 120º Limited Swing Spout available. Add Suffix -LS. Refer to www.specselect.com for individual models. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. 7 Flow Rates are at 60 PSI. Note: Use this page front and back as a product submittal sheet. DSP–24T Rev. A DSP–24T Page 1.C.15 Rev. A INDEXING TOP OF HANDLE BLUE RED Single Control Widespread Faucet Approvals: • CSA certified • Complies to ASME A112.18.1 • ADA Compliant and meets Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. handle operating force. • IAPMO listed (Contact Delta Representative for State and/or Local Approvals.) CONTROL UNIT GOOSENECK No. 1 Handle Outlets #2, 3, 4, 5 122mm 148mm (4.8") (5.8") C A D TO SPOUT Outlet Flow Rates FLOW (USGPM) 6 Outlet #7 1.5 4 3 1 2 .5 A C L 0 10 20 30 40 50 60 Line Pressure (psig) 70 80 51mm (2.0") TO SPOUT 0 Spout Outlets No. 3 & 4 Aerator No. 5 Low Flow Outlet No. 2 Laminar Flow Outlet No. 7 Flow Control 47mm (1.87") 40mm (1.56") MAX. 18 11 11 11 0.45 0.45 0.45 0.45 o 24T0001 Control Unit Only with 2.75" Handle o 24T0003 Control Unit Only with 6" Handle 35mm DIA. 40mm (1.38") MIN. MAX. (Extension Kit (1.56") Available for up to 1 1/2" ThickHOLE Decks)REQUIRED 28mm (1.11") FLEXIBLE STAINLESS **Spout *25mm DIA. (1.00") MIN. STEEL HOSE - 610mm (24") HOLE REQUIRED 41mm (1.6") gooseneck SPOUT “D” OUTLET no. mm in. 2 3 4 5 224mm (8.8") 200mm (7.9") 5 130mm (5.1") No. 3 Handle 2 7 1 0 10mm (3/8") DIA. TUBES 254mm (10") LONG 28mm(1.11") *25mm DIA. (1.00") MIN. HOLE REQUIRED 41mm (1.6") 2.5 9 8 FLEXIBLE STAINLESS STEEL HOSE - 610mm (24") 47mm (1.87") 51mm (2.0") 35mm DIA. TO SPOUT (1.38") MIN. HOLE REQUIRED L FLOW RATE vs PRESSURE FLOW (l/min.) 70mm (2.75") hole 38mm (1.5") maximum diameter. 10mm (3/8") DIA. TUBES 254mm (10") LONG HANDICAP INSTALLATION LIMITED SWING GOOSENECK Add suffix “- LS” to Product Number for 120º Limited Swing 406mm (16") MAX. FOR OPTIONAL RIGID/SWIVEL & LIMITED SWING SPOUTS See DSP-R/S for detailed specification (Found in the “Add-On Option” section when using the printed spec binder) GOOSENECK SPOUT ASSEMBLIES INLETS - 1/2" MIP/Coupling Nuts Note: Measurements may vary ± 6mm (0.25") Refer to www.specselect.com for individual models. Page 1.C.16 DSP–24T Rev. A DSP–24T Rev. A SPOUT/OUTLET Gooseneck-Standard (R2) for outlets #2, 3, 4, 5 Gooseneck-Standard (R2) for outlet #7 “A” “C” “L” mm in. mm in. mm in. 114 4.5 104 4.1 170 6.7 114 4.5  97 3.8 178 7.0 Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. TO SPOUT Lavatory Faucets L n DIAMOND™ Seal Technology n Single Handle n Deck Mount n 3 Hole Sink Applications n 4" (102 mm) Centerset STANDARD SPECIFICATIONS:­ 520-HDF-DST 520-HGMHDF-DST 501-HDF-DST 501-HGMHDF-DST 523-HDF-DST 523-HGMHDF-DST Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ 4 7/8" (124 mm) 6 9/16" (167 mm) 2" (51 mm) Max. Deck Thickness 1 11/16" (43 mm) 2" (51 mm) 1 3/8" (35 mm) 35" (889 mm) 4" (102 mm) Centers 36" (914 mm) 6 1/2" (165 mm) •S  ingle handle lavatory deck faucets for exposed mounting on two and three hole sinks. • 4" (102 mm) centerset. • All metal fabricated body. • 5" (127 mm) spout. • Vandal resistant aerator or spray outlet. • Metal grid strainer (523). • Metal pop-up drain (520). • Lift Rod Hole (520). • Vandal resistant lever handle. Red/blue colored graphics indicate hot/cold temperature. • Control mechanism is the diamond embedded ceramic disc cartridge. • Control handle shall return to the neutral position when valve is turned off. • Adjustable handle limit stop. • 3/8" O.D. straight, staggered PEX supply tubes – 35" (889 mm) and 36" (914 mm) long. • Available Options for Field Conversion: • 6" (152 mm) long elbow handle–red/blue colored graphics indicate hot/cold temperature. Order RP54687 1 5/8" (42 mm) to 2 3/8" (61 mm) 2 1/8" (54 mm) Dia. 1 3/8" (35 mm) Dia. UP C ® ® 8" (203 mm) COMPLIES WITH: • ASME A112.18.1 / CSA B125.1 • ASME A112.18.2 / CSA B125.2 Indicates ADA compliance to ICC/ANSI A117.1 • IAPMO Listed • CSA Certified •V  erified compliant with .25% weighted average Pb content regulations 1 1/4" (32 mm) Dia. METAL GRID STRAINER 2 1/8" (54 mm) Dia. 3 3/8" (86 mm) 4 5/8" (117 mm) 1 1/4" (32 mm) Dia. METAL POP-UP 6 0 69 138 Pressure (kPa) 207 276 345 414 483 552 621 22.7 5 18.9 4 15.1 3 11.4 2 7.6 1 0 3.8 HGM Models Only 0 10 20 30 40 50 60 Pressure (PSI) 70 80 90 Flow (Liters Per Minute) 1 3/8" (35 mm) Dia. Flow (U.S. Gallons Per Minute) 1 5/8" (41 mm) to 2 3/8" (60 mm) 0 Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP–501-HDF-DST Rev. A Page 1.C.17 Lavatory Faucets L ■ Single Handle ■ Deck Mount ■ 3 Hole Sink Applications ■ 4" (102 mm) Centerset STANDARD SPECIFICATIONS:­ 523-HDF 523-WFHDF 523-WFHGMHDF 520-HDF 520-WFHDF 520-WFHGMHDF 501-WFHDF 501-WFHGMHDF Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ 1 7/16" (37 mm) Max. Deck Thickness •S  ingle handle lavatory deck faucets for exposed mounting on two and three hole sinks. • 4" (102 mm) centerset. • Solid brass fabricated body. • 4 1/2" (114 mm) long spout. • Vandal resistant aerator or spray outlet. • Metal grid strainer (523). • Metal pop-up drain (520). 6 1/16" (154 mm) 5 1/8" (130 mm) 6 1/2" (165 mm) 2 1/8" (54 mm) • Lift Rod Hole (520). 6 3/4" (171 mm) 2 1/16" (52 mm) 1 3/4" (44 mm) 3/8" O.D. Copper Tubing 7 1/4" (184 mm) 1/2"-14 NPSM Adapter •V  andal resistant lever handle. Red/blue colored graphics indicate hot/cold temperature. •C  ontrol mechanism shall be of the rotating stainless steel ball type with replaceable non-metallic seats operating in stainless steel lined sockets. •C  ontrol handle shall return to the neutral position when valve is turned off. • Adjustable handle limit stop. • Models have 3/8" O.D. copper supply tubes. 4 1/2" (114 mm) •M  odels with suffix “WF" supplied with 1/2"-14 NPSM adapters. 4" (102 mm) Centers • Available Options for Field Conversion: • 6" (152 mm) long elbow handle–red/blue colored graphics indicate hot/cold temperature. Order RP5645. 1 5/8" (42 mm) to 2 3/8" (61 mm) 2 1/8" (54 mm) Dia. 1 3/8" (35 mm) Dia. 8" (203 mm) UP ® C ® COMPLIES WITH: 1 1/4" (32 mm) Dia. • ASME A112.18.1 • CSA B125 METAL GRID STRAINER • • 2 1/8" (54 mm) Dia. Indicates ADA compliance to CABO/ANSI A117.1 IAPMO Listed CSA Certified 1 5/8" (41 mm) to 2 3/8" (60 mm) 4 5/8" (117 mm) 1 1/4" (32 mm) Dia. METAL POP-UP 6 0 69 138 207 276 345 414 483 552 621 22.7 5 18.9 4 15.1 3 11.4 2 7.6 3.8 1 HGM Models Only 0 0 10 20 30 40 Flow (Liters Per Minute) 1 3/8" (35 mm) Dia. Flow (U.S. Gallons Per Minute) Pressure (kPa) 3 3/8" (86 mm) 0 50 60 70 80 90 Pressure (PSI) Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 1.C.18 DSP–501-HDF Rev. D Lavatory Faucets L n DIAMOND™ Seal Technology n Single Handle n Deck Mount n 3 Hole Sink Applications n 4" (102 mm) Centerset 511-HDF-DST 511-HGMHDF-DST 516-HDF-DST 516-HGMHDF-DST 515-HDF-DST Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ ­STANDARD SPECIFICATIONS:­ •S  ingle handle lavatory deck faucets for exposed mounting on two and three hole sinks. • 4" (102 mm) centerset. • All metal fabricated body. • 5" (127 mm) spout. 7 3/8" (187 mm) 8 7/16" (214 mm) 2" (51 mm) Max. Deck Thickness 1 11/16" (43 mm) •V  andal resistant 6" (152 mm) elbow handle. Red/blue colored graphics indicate hot/cold temperature. • Control  mechanism is the diamond embedded ceramic disc cartridge. •C  ontrol handle shall return to the neutral position when valve is turned off. 2" (51 mm) • Adjustable handle limit stop. 36" (914 mm) 1 3/8" (35 mm) 4" (102 mm) Centers 35" (889 mm) 6 1/2" (165 mm) • Vandal resistant aerator or spray outlet. • Metal grid strainer (516). • Metal pop-up drain (515). • Lift Rod Hole (515). •3  /8" O.D. straight, staggered PEX supply tubes – 35" (889 mm) and 36" (914 mm) long. 1 5/8" (42 mm) to 2 3/8" (61 mm) 2 1/8" (54 mm) Dia. UP C ® ® COMPLIES WITH: 1 3/8" (35 mm) Dia. • • • • • 8" (203 mm) 1 1/4" (32 mm) Dia. METAL GRID STRAINER ASME A112.18.1 / CSA B125.1 ASME A112.18.2 / CSA B125.2 Indicates ADA compliance to ICC/ANSI A117.1 IAPMO Listed CSA Certified Verified compliant with .25% weighted average Pb content regulations 2 1/8" (54 mm) Dia. 3 3/8" (86 mm) 4 5/8" (117 mm) 1 1/4" (32 mm) Dia. METAL POP-UP 6 0 69 138 Pressure (kPa) 207 276 345 414 483 552 621 22.7 5 18.9 4 15.1 3 11.4 2 7.6 1 0 3.8 HGM Models Only 0 10 20 30 40 50 60 Pressure (PSI) 70 80 90 Flow (Liters Per Minute) 1 3/8" (35 mm) Dia. Flow (U.S. Gallons Per Minute) 1 5/8" (41 mm) to 2 3/8" (60 mm) 0 Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP–511-HDF-DST Rev. A Page 1.C.19 Lavatory Faucets L ■ Single Handle ■ Deck Mount ■ 2 and 3 Hole Sink Applications ■ 4" (102 mm) Centerset 511-WFHDF 511-WFHGMHDF 515-WFHDF 515-WFHGMHDF 516-WFHDF 516-WFHGMHDF STANDARD SPECIFICATIONS:­ Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ • 4" (102 mm) centerset. • Solid brass fabricated body. 6 1/16" (154 mm) • 4 1/2" (114 mm) long spout. •V  andal resistant 6" (152 mm) elbow handle. Red/blue colored graphics indicate hot/cold temperature. 9 1/2" (241 mm) 1 7/16" (37 mm) Max. Deck Thickness •S  ingle handle lavatory deck faucets for exposed mounting on two and three hole sinks. 6 3/8" (162 mm) 1 3/4" (44 mm) •C  ontrol mechanism shall be of the rotating stainless steel ball type with replaceable non-metallic seats operating in stainless steel lined sockets. •C  ontrol handle shall return to the neutral position when valve is turned off. • Adjustable handle limit stop. 3/8" O.D. Copper Tubing 6 1/2" (165 mm) 2 1/8" (54 mm) • Vandal resistant aerator or spray outlet. 1/2"-14 NPSM • Metal grid strainer (516). • Metal pop-up drain (515). • Lift Rod Hole (515). 4 1/2" (114 mm) 4" (102 mm) Centers 6 1/2" (165 mm) 7 1/4" (184 mm) •M  odels have 3/8" O.D. copper supply tubes with 1/2"-14 NPSM adapters. 1 5/8" (42 mm) to 2 3/8" (61 mm) 2 1/8" (54 mm) Dia. UP ® C ® 1 3/8" (35 mm) Dia. COMPLIES WITH: • ASME A112.18.1 • CSA B125 8" (203 mm) • • 1 1/4" (32 mm) Dia. Indicates ADA compliance to CABO/ANSI A117.1 IAPMO Listed CSA Certified METAL GRID STRAINER 2 1/8" (54 mm) Dia. 1 5/8" (41 mm) to 2 3/8" (60 mm) 4 5/8" (117 mm) 1 1/4" (32 mm) Dia. METAL POP-UP 6 0 69 138 207 276 345 414 483 552 621 22.7 5 18.9 4 15.1 3 11.4 2 7.6 3.8 1 HGM Models Only 0 0 10 20 30 40 Flow (Liters Per Minute) 1 3/8" (35 mm) Dia. Flow (U.S. Gallons Per Minute) Pressure (kPa) 3 3/8" (86 mm) 0 50 60 70 80 90 Pressure (PSI) Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 1.C.20 DSP–511-HDF Rev. D Lavatory Faucets L n Single Handle n Deck Mount n 1 Hole Sink Applications STANDARD SPECIFICATIONS:­ 570-WFHDF •S  ingle handle lavatory deck faucets for exposed mounting on one hole sinks. 570-06ELH • Solid brass fabricated body. Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ • 2.2 gpm (8.3 L/min) vandal resistant aerator. • 4" (102 mm) long spout swings 360°. (570-WFHDF) • 6" (152 mm) long spout swings 360°. (570-06ELH) •V  andal resistant lever handle. Red/blue colored graphics indicate hot/cold temperature. 570-WFHDF 4" (102 mm) 360° Swing Spout •C  ontrol mechanism shall be of the rotating stainless steel ball type with replaceable non-metallic seats operating in stainless steel lined sockets. •C  ontrol handle shall return to the neutral position when valve is turned off. • Adjustable handle limit stop. 5 7/8" (149 mm) •A  ll operating parts shall be replaceable from the top. •M  odels have 3/8" O.D. copper supply tubes with 1/2"-14 NPSM adapters. 1 7/8" (48 mm) 2" DIA. (51 mm) • Available Options for Field Conversion: • 6" (152 mm) Long Swing Spout. Order RP9633. • 8" (203 mm) Long Swing Spout. Order RP5654. • 10" (254 mm) Long Swing Spout. Order RP5653. 1 9/16" (40 mm) Max. Deck Thickness 1 1/4" (32 mm) Min. Hole Required • 12" (305 mm) Long Swing Spout. Order RP6042. •6  " (152 mm) Long Elbow Handle with Red/Blue Graphics to Indicate Hot/Cold Temperatures. Order RP5645. 3/8" Dia. Tubes 10 3/4" (273 mm) Long UP ® C 1/2"-14 NPSM Adapter 570-06ELH ® COMPLIES WITH: 6″ (152mm) 360° SWING SPOUT • ASME A112.18.1 • CSA B125 • • Indicates ADA compliance to CABO/ANSI A117.1 IAPMO Listed CSA Certified 7 1/2″ (191 mm) Pressure (kPa) 2″ DIA. (50 mm) 1/2″ -14 NPSM ADAPTER 3/8″ DIA. TUBES 10 3/4″ (273 mm) LONG 6 0 69 138 207 276 345 414 483 552 621 22.7 5 18.9 4 15.1 3 11.4 2 7.6 1 3.8 Flow (Liters Per Minute) 1 1/4″ (32 mm) MIN. HOLE REQUIRED 1 9/16″ (40 MM) MAX. DECK THICKNESS Flow (U.S. Gallons Per Minute) 3 1/2″ (89 mm) 0 0 0 10 20 30 40 50 60 70 80 90 Pressure (PSI) Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP–570-HDF Rev. D Page 1.C.21 Page 1.C.22 Specialty Faucets L n Single Handle Widespread Deck Mount n DIAMOND™ Seal Technology n Utility Faucet n 2 Hole Sink Applications n PEX Hose Installation STANDARD SPECIFICATIONS:­ 710-HDF-DST •S  ingle handle utility deck faucet for exposed mounting on two hole sinks. 711-HDF-DST • Solid fabricated brass body. Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ 710-HDF-DST & 711-HDF-DST •5  " (127 mm) long, 10" (254 mm) high gooseneck spout. Rigid (710), 180° Swing (711). •V  andal resistant 6" (152 mm) elbow handle. Red/blue colored graphics indicate hot/cold temperature. •C  ontrol mechanism shall be the DIAMOND coated ceramic cartridge. 5" (127 mm) Min. 2 1/8" (54 mm) Clearance To Back Splash •C  ontrol handle returns to the neutral position when valve is turned off. • Adjustable handle limit stop. • Standard3/8" (10 mm) compression gasket fittings. 10" (254 mm) 6" (152 mm) 2 1/2" (63.5 mm) 2 5/32" (55 mm) Min. 2 x 1 1/2" (38 mm) Dia. Hole Size 7 5/8" (194 mm) 8 7/32" (209 mm) •3  /8" O.D. straight, staggered PEX supply tubes – 35" (889 mm) and 36" (914 mm) long. • 1.5 gpm (5.7 L/min) vandal-resistant aerator. 2 1/2" (64 mm) Max. Deck Thickness UP ® C ® COMPLIES WITH: • ASME A112.18.1 • CSA B125.1 Indicates ADA compliance to ICC /ANSI A117.1 36" (914 mm) 35" (889 mm) 6 0 69 138 Pressure (kPa) 207 276 345 414 483 552 621 22.7 5 18.9 4 15.1 3 11.4 2 7.6 1 3.8 0 0 10 20 30 40 50 60 Pressure (PSI) 70 80 90 Flow (Liters Per Minute) 3/8" Compression Fitting Pb content regulations Flow (U.S. Gallons Per Minute) 3/8" PEX Tubing • IAPMO Listed • Verified compliant with .25% weighted average 0 Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP–710-HDF-DST Rev. A Page 1.C.23 Specialty Faucets L n Single Handle n Utility Faucet n Deck Mount n 2 Hole Sink Applications n 8" (203 mm) Maximum Centers STANDARD SPECIFICATIONS:­ •S  ingle handle utility deck faucet for exposed mounting on two hole sinks. 710-WFHDF 711-WFHDF710-WFHDF • 8" (203 mm) maximum centers. Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ • Solid brass fabricated body. •5  3/4" (147 mm) long, 11" (279 mm) high gooseneck spout. Rigid (710), 360° Swing (711). •V  andal resistant 6" (152 mm) elbow handle. Red/blue colored graphics indicate hot/cold temperature. 5 3/4" (147 mm) 2" (51 mm) 11" (279 mm) 7 5/16" (186 mm) •C  ontrol handle returns to the neutral position when valve is turned off. • Adjustable handle limit stop. 6 1/8" (156 mm) • 2.2 gpm (8.3 L/min) laminar flow outlet. 2" (51 mm) • Models have 3/8" O.D. copper supply tubes with 1/2"-14 NPSM adapters. 1 3/16" (30 mm) 3/4" (19 mm) Flexible Braided Hose •C  ontrol mechanism shall be of the rotating stainless steel ball type with replaceable non-metallic seats operating in stainless steel lined sockets. 1 1/4" (32 mm) Dia. Min. Hole Required UP ® 8" (203 mm) Max. 3/8" Dia. Tubes 10" (254 mm) Long C ® 1/2"-14 NPSM Adapter 1 9/16" (40 mm) Max. Deck Thickness COMPLIES WITH: • ASME A112.18.1 • CSA B125 • • Indicates ADA compliance to CABO/ANSI A117.1 IAPMO Listed CSA Certified 710WFHDF.LINE 710WFHDF.LINE 6 69 138 207 276 345 414 483 552 621 22.7 5 18.9 4 15.1 3 11.4 2 7.6 1 3.8 Flow (Liters Per Minute) Flow (U.S. Gallons Per Minute) Pressure (kPa) 0 0 0 0 10 20 30 40 50 60 70 80 90 Pressure (PSI) 5 4 18.9 D DSP–710-HDF Rev. 15.1 Flow (Liters Page 1.C.24 s Per Minute) Pressure (kPa) Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. 0 book69or www.specselect.com 138 207 276 345 414options 483 and 552 621availability. Dimensions are for reference only. See current full-line price for finish product 22.7 6 Lavatory Faucets L n Two Handle n Deck Mount n 2 Hole Sink Applications n 4" (102 mm) Centerset STANDARD SPECIFICATIONS:­ • T wo handle lavatory deck faucets for exposed mounting on two or three hole sinks. 2523-LGHDF • 4" (102 mm) centerset. Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ • Solid brass fabricated body. • 3 7/16" (87 mm) long spout. • No lift rod hole. •V  andal resistant brass lever handles. Red/blue colored graphics indicate hot/cold temperature. •C  ontrol mechanism shall be of the rotating cylinder type with stainless steel plate and 1/4 turn stops. Replaceable non-metallic seats operate in stainless steel lined sockets. 2 1/2" (64 mm) 1" (25 mm) Max. Deck Thickness 3 7/16" (87 mm) • Hot and cold stems are interchangeable. 3 1/4" (83 mm) 1 3/8" (35 mm) 1/2"-14 NPSM 2" (51 mm) 4" (102 mm) Centers • 1/2"-14 NPSM threaded male inlet shanks. • 1.5 gpm (5.7 L/min) vandal resistant aerator. 2" (51 mm) 6" (152 mm) UP ® C ® COMPLIES WITH: • ASME A112.18.1 • CSA B125 • • Indicates ADA compliance to CABO/ANSI A117.1 IAPMO Listed CSA Certified 6 69 138 207 276 345 414 483 552 621 22.7 5 18.9 4 15.1 3 11.4 2 7.6 1 3.8 Flow (Liters Per Minute) 2523HDF.LINE Flow (U.S. Gallons Per Minute) Pressure (kPa) 0 0 0 0 10 20 30 40 50 60 70 80 90 Pressure (PSI) Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP–2523-HDF Rev. E Page 1.C.25 Lavatory Faucets L ■ Two Handle ■ Deck Mount ■ 2 and 3 Hole Sink Applications ■ 4" (102 mm) Centerset STANDARD SPECIFICATIONS:­ • T wo handle lavatory deck faucets for exposed mounting on two and three hole sinks. • 4" (102 mm) centerset. 2529-LGHDF 2529-LGHGMHDF 2529-HDM 2529-HDF • Solid brass fabricated body. Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ •V  andal resistant metal wrist blade handles. Red/blue colored graphics indicate hot/cold temperature. •C  ontrol mechanism shall be of the rotating cylinder type with stainless steel plate and 1/4 turn stops. Replaceable non-metallic seats operate in stainless steel lined sockets. 4" (102 mm) 1" (25 mm) Max. Deck Thickness • 3 7/16" (87 mm) long spout. • Hot and cold stems are interchangeable. 3 7/16" (87 mm) • 1/2"-14 NPSM threaded male inlet shanks. 3 5/8" (92 mm) 1 3/8" (35 mm) •1  .5 gpm (5.7 L/min) vandal resistant aerator or .5 gpm (1.9 L/min) spray outlet. • Metal grid strainer (2529-HDF). • Metal pop-up drain (2529-HDM). 2" (51 mm) 4" (102 mm) Centers 1/2"-14 NPSM • Lift Rod Hole (2529-HDM). 6" (152 mm) 2" (51 mm) UP ® C ® COMPLIES WITH: 2 1/8" (54 mm) Dia. 1 5/8" (42 mm) to 2 3/8" (61 mm) 1 5/8" (41 mm) to 2 3/8" (60 mm) • • 3 3/8" (86 mm) 1 3/8" (35 mm) Dia. Indicates ADA compliance to CABO/ANSI A117.1 IAPMO Listed CSA Certified 1 3/8" (35 mm) Dia. 8" (203 mm) 4 5/8" (117 mm) 2529HDF.LINE 1 1/4" (32 mm) Dia. Pressure (kPa) 6 0 METAL POP-UP 138 207 276 345 414 483 552 621 22.7 5 18.9 4 15.1 3 11.4 2 7.6 3.8 1 HGM Models Only 0 0 METAL GRID STRAINER 69 10 20 30 40 Flow (Liters Per Minute) 1 1/4" (32 mm) Dia. • ASME A112.18.1 • CSA B125 Flow (U.S. Gallons Per Minute) 2 1/8" (54 mm) Dia. 0 50 60 70 80 90 Pressure (PSI) Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 1.C.26 DSP–2529-HDF Rev. E Lavatory Faucets L n Two Handle n Widespread n Three Hole Sink Applications n 6"-16" (152 mm-406 mm) Centers STANDARD SPECIFICATIONS:­ 3549-WFLGHDF 3549-WFHDF Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ 1 1/8" (29 mm) Max. Deck Thickness 4 3/4" (121 mm) 6"-16" (152 mm406 mm) Centers 3 1/8" (79 mm) 2" (51 mm) Dia. 1 1/8" 2 7/16" (29 mm) (62 mm) Dia. 7 5/16" (186 mm) 1" (25 mm) Dia. 7 5/8" (194 mm) 3/8" O.D. Copper Tubing 1/2"-14 NPSM Adapter • Two handle lavatory faucets for concealed mounting on three hole sinks. • Solid brass fabricated end valves and spout body. • Widespread 6"-16" (152 mm-406 mm) centers. • 4 3/4" (121 mm) long rigid spout. • No lift rod hole. • Metal grid strainer (3549-WFHDF). • Vandal resistant metal wrist blade handles. Red/blue colored graphics indicate hot/cold temperature. • Control mechanism shall be of the rotating cylinder type with stainless steel plate and 1/4 turn stops. Replaceable non-metallic seats operate in stainless steel lined sockets. • Hot and cold stems are interchangeable. • 1.5 gpm (5.7 L/min) vandal resistant laminar outlet. • 3/8" O.D. copper supply tube inlets with 1/2"-14 NPSM adapters. • Available Options for Field Conversion: • Vandal resistant aerator with wrench - 2.2 gpm (8.3L/min). Chrome plated. Order RP246. • Vandal resistant laminar flow spray outlet with wrench - 2.2 gpm (8.3L/min). Chrome plated. Order RP21966. • Vandal resistant spray outlet with wrench - .5 gpm (1.9L/min). Chrome plated. Order RP31704. Flexible Hose Connection UP ® C ® COMPLIES WITH: • ASME A112.18.1 • CSA B125 1 5/8" (42 mm) to 2 3/8" (61 mm) • • Indicates ADA compliance to CABO/ANSI A117.1 IAPMO Listed CSA Certified Pressure (kPa) 1 3/8" (35 mm) Dia. 1 1/4" (32 mm) Dia. 6 0 69 138 207 276 345 414 483 552 621 22.7 5 18.9 4 15.1 3 11.4 2 7.6 1 3.8 Flow (Liters Per Minute) 8" (203 mm) Flow (U.S. Gallons Per Minute) 2 1/8" (54 mm) Dia. 0 0 0 10 20 30 40 50 60 70 80 90 Pressure (PSI) Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. DSP–3549-HDF Rev. E Page 1.C.27 Lavatory Faucets L n Two Handle n Widespread n Three Hole Sink Applications n 6"-16" (152 mm-406 mm) Centers STANDARD SPECIFICATIONS:­ • T wo handle lavatory faucets for concealed mounting on three hole sinks. • Solid brass fabricated end valves and spout body. 3579-WFHDF • Widespread 6"-16" (152 mm-406 mm) centers. 3579-WFLGHDF Submitted Model No.:________________________________________________ Specific Features:___________________________________________________ 3 1/8" (79 mm) 1" (25 mm) Dia. • Hot and cold stems are interchangeable. • 1.5 gpm (5.7 L/min) outlet. •3  /8" O.D. copper supply tube inlets with 1/2"-14 NPSM adapters. 11" (279 mm) 4" (102 mm) 5 3/4" (146 mm) 6 1/8" (156 mm) 2" (51 mm) Dia. 1 1/8" (29 mm) Dia. 7 5/8" (194 mm) •M  etal wrist blade handles. Vandal resistant red/blue screws indicate hot/cold temperature. •C  ontrol mechanism shall be of the rotating cylinder type with stainless steel plate and 1/4 turn stops. Replaceable non-metallic seats operate in stainless steel lined sockets. 6"-16" (152 mm-406 mm) Centers 1 1/8" (29 mm) Max. Deck Thickness •5  3/4" (146 mm) long, 11" (279 mm) high rigid gooseneck spout. 7 5/16" (186 mm) Flexible Hose Connection • Metal grid strainer (3579-WFHDF). • Available Options for Field Conversion: • Vandal resistant aerator with wrench - 2.2 gpm (8.3L/min). Chrome plated. Order RP246. • Vandal resistant laminar flow spray outlet with wrench - 2.2 gpm (8.3L/min). Chrome plated. Order RP21966. • Vandal resistant spray outlet with wrench - .5 gpm (1.9L/min). Chrome plated. Order RP31704. UP ® 3/8" O.D. Copper Tubing C ® COMPLIES WITH: • • 1/2"-14 NPSM Adapter 2 1/8" (54 mm) Dia. 1 5/8" (42 mm) to 2 3/8" (61 mm) • • ASME A112.18.1 CSA B125 Indicates ADA compliance to CABO/ANSI A117.1 IAPMO Listed CSA Certified 8" (203 mm) 1 1/4" (32 mm) Dia. 6 69 138 207 276 345 414 483 552 621 22.7 5 18.9 4 15.1 3 11.4 2 7.6 1 3.8 Flow (Liters Per Minute) 1 3/8" (35 mm) Dia. Flow (U.S. Gallons Per Minute) Pressure (kPa) 0 0 0 0 10 20 30 40 50 60 70 80 90 Pressure (PSI) Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability. Page 1.C.28 DSP–3579-HDF Rev. E