Transcript
Cast Centerset Faucets 4” Centers Specification: (example) • HEAVY DUTY CAST BRASS centerset faucet • 102mm (4") centers, two handle • Polished chrome plated finish with polished underspout • Metal hold-down package • Color indexed metal handles with vandal resistant screws and … with … (add CER-TECK™ 1/4 turn ceramic structures or TUF-TECK™ compression structures) with … (add product variation required) with … (add outlet required) with … (add handle required) DESCRIPTION CER-TECK™ 4" Centerset Faucet TUF-TECK™
21C144 21T144
21C143 21T143 Engineer/Architect Approval Model Specified: Approval:
Date:
PRODUCT NO. 21C 21T
PRODUCT VARIATION
HANDLE
OUTLET
✔ 0
✔ 0
✔ 0
1
Vandal Resistant 1.9 USGPM (7.2 L/min.) Flow Control Rosespray
1
Five Flute Handles
2
102mm (4") Hooded Blade Handles
1
Standard Product Less Pop-up (No Pop-up Hole)
2
Standard Product With Cast Pop-up
2
Vandal Resistant 1.5 USGPM (5.7 L/min.) Laminar w/Antimicrobial By AgIONTM
3
Standard Product with Cast Open Grid Strainer (No Pop-up Hole)
3
Vandal Resistant 1.5 USGPM (5.7 L/min.) Flow Control Aerator
3
76mm (3”) Lever Blade Handles
4
Standard Product With Cast Offset Open Grid Strainer (No Pop-up Hole)
4
Standard 1.5 USGPM (5.7 L/min.) Flow Control Aerator
4
102mm (4”) Blade Handles, Sanitary Hoods
5
Standard Product With Chain Stay Less Plug & Chain
5
Vandal Resistant 0.5 USGPM (1.9 L/min.) Flow Control Non-Aerating Spray Outlet
5
152mm (6") Wrist Handles, Sanitary Hoods
6
6
6
7
7
7
8
8
8
76mm (3”) Self-Closing Lever Blade Handles
9
9
9
Five Flute Self-Closing Handles
See Series 27C4, 27C5, 27T4, & 27T5 for 4" Gooseneck Spout Centersets.
Refer to www.specselectonline.com for individual models.
Flowrates are at 60 PSI.
Note: Use this page front and back as a product submittal sheet.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselectonline.com for finish options and product availability.
Page 1.C.1
Cast Centerset Faucets 4” Centers Approvals: • CSA certified
FRONT VIEW
135mm (5.3")
• Complies to ASME A112.18.1 • Lever Blade Handle No. 2, 3, 4 and 5, ADA Compliant and meet Handicapped Accessibility Standard ASME A117.1 of less than 5 lbs. operating force.
152mm (6.0")
1 & 9
85mm (3.4")
5
141mm (5.5")
• IAPMO listed 96mm (3.77")
(Contact Delta Representative for State and/or Local Approvals.)
2
102mm (4.0")
89mm (3.5") 102mm (4.0")
95mm (3.7")
117mm (4.6")
4 3 & 8 FLOWRATE vs PRESSURE
76mm (3.0")
25mm (1") DIA. MIN.
Outlet Flowrates FLOW (l/min.)
FLOW (USGPM)
2.5
76mm (3.0")
9 8
2
169mm (6.64")
INLETS: 1/2" MIP/COUPLING NUTS
7 6
44mm (1.75") MAX. DECK THICKNESS
102mm (4.0")
1.5
5 4
SIDE VIEW
1
CAST POP-UP (supplied with Product Variation 2)
3 .5
2 1 0
0 0
10
20
30
40
50
60
70
Line Pressure (psig)
Spout Outlets No. 0 Aerator
D
80
91mm (3.6")
66mm (2.6")
54mm (2.13") DIA.
23
No. 3 & 4 Aerator
64mm (2.5") MAX
No. 2 Laminar Flow Outlet
CAST SPOUT OUTLET NO.
1 2 3 4 5
130mm (5.1") “D”
mm 19 11 11 11 11
in. 0.75 0.45 0.45 0.45 0.45
210mm (8.25")
56mm (2.2")
32mm (1.25")
OPEN GRID STRAINER
OFFSET OPEN GRID STRAINER
(supplied with Product Variation 3)
(supplied with Product Variation 4) 57mm (2.25") DIA.
57mm (2.25") DIA.
51mm (2.0") MAX
57mm (2.25") MAX. 282mm (11.0") 194mm (7.63")
216mm (8.5")
INLETS - 1/2'' MIP/Coupling Nuts
32mm (1.25")
130mm (5.1")
32mm (1.25")
Note: Measurements may vary ± 6mm (0.25'') Refer to www.specselectonline.com for individual models.
DSP–21C/T
Note: Use this page front and back as a product submittal sheet. Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. See current price list for product availability. Dimensions are for reference only. See current full-line price book or www.specselectonline.com for finish options and product availability.
