Transcript
308E
Mini Hydraulic Excavator
Engine Engine Model Net Power @ 2,400 rpm Gross Power @ 2,000 rpm Bucket Bucket Size – Standard Stick Bucket Size – Long Stick
Cat® C3.3 DI Turbo 46.8 kW 49.7 kW 0.38 m3 0.31 m3
Weights Operating Weight – Standard Stick Operating Weight – Long Stick Operating Weight – Standard Stick with Blade Operating Weight – Long Stick with Blade
7160 kg 7190 kg 7720 kg 7760 kg
308E Features High Performance Lower fuel consumption and higher fuel efficiency keeps you working all day. Standard/Power dual mode offers the choice of lower fuel consumption or superior productivity. Smooth new intuitive flow sharing “High Definition Hydraulic” system provides the level of control demanded in any application. High Altitude and Cold Start Capability The 308E is equipped with the new Cat C3.3 DI Turbo engine with altitude capability to 2500 m and cold start capacity as low as –15.7 degrees. Versatility Optional long stick provides even greater reach.
Contents Performance ........................................................4
Undercarriage .....................................................5
Operator Comfort ................................................6
Monitoring System..............................................6
Engine ...................................................................7
Serviceability and Customer Support ..............8
Specifications ....................................................10
Standard Equipment .........................................12
Optional Equipment...........................................13
Notes ...................................................................14
2
The Cat 308E Mini Hydraulic Excavator delivers superior performance and comfort while reducing your fuel consumption and operating costs. The large spacious cab provides a comfortable work area. Intuitive seat-mounted controls are easy to use for greater job accuracy and efficiency. The standard tail swing design incorporates a counterweight that extends further back on the machine. This provides leverage to create a stable work platform during lifting and digging. The 308E sets the standard for conventional tail swing excavators in the eight-ton size class. 3
Performance Powerful digging combined with smooth control.
Hydraulics Smooth responsive hydraulics give the level of control demanded by the customer in any application, from fine grading and dozing to backfilling. Powerful bucket and stick digging forces combined with fast cycle times result in world class productivity and performance. Two speed function improves job site maneuverability and can be selected by an easily accessible foot switch on the control console. Dozer blade float function enables easy ground leveling for landscaping and finish grade applications as well as more efficient job site clean-up.
Lift Capacity The new Cat E Series has industry leading lift capacity matched with outstanding stability. This provides the control required to meet the diverse and continually changing needs of the customer.
Long Stick Option An optional long stick is available for the 308E for greater reach in ditch clearing, truck loading and other applications.
4
Steel Track The standard 450 mm triple grouser steel tracks provide optimum stability when lifting over the side, in demolition and heavy duty applications.
Optional Dozer with Float Function The dozer function is pilot controlled from inside the cab, providing smooth, proportional operation. The dozer float function is enabled by pushing the lever fully forward into the decent position. Site clean up and backfilling are easier as the operator does not have to adjust the blade height during travel.
Undercarriage
Excellent stability.
5
Operator Comfort Simple, easy operation allows the operator to focus on production.
Operator Station The operator environment provides the operator with a larger cab and more ingress and egress room. The clear flat floor space allows the operator plenty of leg room. An intuitive cab layout with ergonomic joysticks, standard spring suspension seat and clear display panel makes for ease of operation allowing the operator to focus on production.
Monitoring System
Maintenance and performance
The new monitoring control panel on the E Series was specifically designed by Caterpillar for compact excavators. This system helps you easily keep track of various maintenance and performance parameters of the machine. Maintenance and performance information are all standard on the 308E.
Performance Maintenance Menu The “Performance” menu allows the operator to view measurements of various system components.
Maintenance Information Menu The “Maintenance Info” menu allows the operator to view the current hours of use and the recommended change intervals for various system components.
6
Engine Clean, quiet and efficient
Efficient Engine and Load Sensing Hydraulics
Cold Start Capability
The 308E uses a fuel efficient Cat C3.3 DI engine with a net power rating of 46.8 kW. It features a powerful load-sensing hydraulic system with standard auxiliary hydraulic valve section to provide excellent digging performance and smooth control. Low noise and vibration levels deliver comfortable operation. The C3.3 engine features a new direct injection fuel system that delivers optimum fuel efficiency.
Cat C3.3 DI engine is equipped with cold start capacity as low as –15.7 degrees.
One Side Maintenance The Cat C3.3 engine offers superior maintenance convenience with its large steel rear door and two large side doors for easy access to all major components and service points.
High Ambient Cooling A high ambient temperature cooling system is standard and features stacked coolers for a compact design.
7
Serviceability and Customer Support Easy access and minimal maintenance requirements keep you working.
8
Excellent Service Access and “One Side Maintenance” Engine Daily checks and regular service points including fuel and hydraulic oil fill are easily reached via the large steel rear door and two large side doors. The main hydraulic valve and lines are also easily reached through a removable floor plate and side panels. The new Cat C3.3 engine features “one side maintenance” to offer superior maintenance convenience. The machine has durable steel body panels all around, offering good resistance to impact damage and helping to maintain the machine’s appearance and value. S·O·SSM oil sampling valve allows easy sampling of the hydraulic fluid for preventative maintenance.
Customer Support – Unmatched Support Makes the Difference Your Cat dealer is ready to assist you with your purchase decision and everything after. • Financing packages are flexible to meet your needs • Unmatched parts availability keeps you working • Make comparisons of machines, with estimates of component life, preventative maintenance and cost of production • For more information on Cat products, dealer services and industry solutions, visit www.cat.com
9
308E Mini Hydraulic Excavator Specifications
Engine Engine Model Net Power @ 2,400 rpm Gross Power @ 2,000 rpm
Travel System
Cat C3.3 DI Turbo 46.8 kW 49.7 kW
• Meets U.S. EPA Interim Tier 2 emission requirements. • Net power rating per ISO 9249 and SAE J1349. • Gross power rating per SAE J1995.
7160 kg 7720 kg 7190 kg 7760 kg
**Weight with cab, 3.7 m boom, 1.82 m stick, 0.38 m3 bucket (945 mm width) and 450 mm shoes. **Weight with cab, 3.7 m boom, 2.21 m stick, 0.31 m3 bucket (820 mm width) and 450 mm shoes.
Engine Dimensions Bore Stroke Displacement
94 mm 120 mm 3.3 L
Swing System Machine Swing Speed Swing Torque
10.8 min-1 16.3 kN·m
Hydraulic System Load Sensing Hydraulics with Variable Displacement Piston Pump Pump Flow at 2,000 rpm 147 L/min Operating Pressure – Equipment 28 000 kPa Operating Pressure – Travel 28 000 kPa Operating Pressure – Swing 24 000 kPa Digging Force – Stick (standard) 38.9 kN Digging Force – Bucket 57.1 kN
10
5.1 km/h 3.2 km/h 56.9 kN 30 Degrees
Electrical System Type
Weights Operating Weight with Standard Stick* Operating Weight with Standard Stick and Blade* Operating Weight with Long Stick** Operating Weight with Long Stick and Blade**
Travel Speed – High Travel Speed – Low Maximum Drawbar Pull Gradeability (maximum) – High
• 60-amp alternator. • 12-volt, heavy-duty batteries.
Service Refill Capacities Cooling System Engine Oil Fuel Tank Hydraulic Tank Hydraulic System
12.1 L 11.2 L 135 L 51 L 94 L
Front Boom Length Standard Stick Length Long Stick Length
3700 mm 1820 mm 2210 mm
Blade Width Height Dig Depth Lift Height
2300 mm 450 mm 350 mm 390 mm
Track Track Shoe Width (standard) Track Length Ground Pressure Number of Track Rollers (each side) Number of Carrier Rollers (each side)
450 mm 2910 mm 30.5 kPa 5 1
308E Mini Hydraulic Excavator Specifications
Dimensions
8
5 6 11
17 9 10
2
7 18
12
13 14
1 16 15
3 4 Stick 1 Maximum Digging Depth
Standard 4210 mm
Long 4600 mm
2 Length of Track on Ground 3 Maximum Reach at Ground Line
2280 mm
—
6290 mm
6660 mm
4 Maximum Reach of Working Range 5 Maximum Cutting Height
6420 mm
6780 mm
7330 mm
7610 mm
6 Maximum Dump Height 7 Ground Clearance, Frame
5300 mm
5590 mm
370 mm
—
8 Tail Swing Radius 9 Blade Up
1750 mm
1750 mm
390 mm
—
Stick 10 Blade Down
Standard 350 mm
Long —
11 Cab Height 12 Ground Clearance, Counterweight
2560 mm
—
750 mm
—
13 Track Length 14 Shipping Length
2910 mm
—
6080 mm
6030 mm
15 Track Shoe Width 16 Shipping Width 17 Shipping Height 18 Blade Height
450 mm
—
2320 mm
2320 mm
2700 mm
3100 mm
450 mm
—
Lift Capacities at Ground Level*
Lift Point Radius Lift Point Height
3000 mm
Ground Line
kg
Front 3100
–3.0 m
kg
2100
Maximum Radius Side 2400
Front 1100
Side 900
2100
1600
1600
*The above loads are in compliance with hydraulic excavator lift capacity rating standard ISO 10567: 2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart. Lifting capacities are for standard stick. 11
308E Standard Equipment
Standard Equipment
Standard equipment may vary. Consult your Cat dealer for details.
• • • • • • • • • • • •
Diesel engine, C3.3 with electrical governor Two speed travel with manual shift Cat one key security system Door locks and cap locks Signaling/warning horn GPS ready Muffler with cover Radial seal air filter, double element Stacked cooling package Auxiliary hydraulic valve (one) Straight line travel Accumulator
12
• Cab: – Operable front windshield with assist device – Removable lower windshield with in cab storage bracket – Windshield wiper and washer – Interior lighting – Coat hook – Ashtray – Radio mounting (meet DIN size) – Two stereo speakers – Antenna – Cup holder – Storage pocket – Mounting for front and top guard (mounting boss)
• • • • • • • • • •
Color LCD monitor Hour meter Retractable seat belt (50 mm width) Hydraulic activation control lever (lock out) for all controls Two travel control hand levers Capability to install one additional pedal for auxiliary hydraulic control Seat with suspension 450 mm triple grouser track shoes with holes (for rubber pad) Towing eye on base frame Rearview mirror, mounted on right hand side of upper frame
308E Optional Equipment
Optional Equipment
Optional equipment may vary. Consult your Cat dealer for details.
• • • •
Blade Long stick Lighting – cab Control – PTO, auxiliary hydraulic lines from main auxiliary valve to boom foot plus auxiliary control pedal
• Lines Group – PTO, auxiliary hydraulic lines from boom foot to stick, stop valves • Travel alarm • Heavy duty swivel guard
• Cab front guard • Drain-oil pan (ecology) • Heater, water jacket
13
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com © 2014 Caterpillar All rights reserved Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
AEHQ7268 (05-2014) (GN1)
Cat
®
308E2 CR SB MINI HYDRAULIC EXCAVATOR WITH SWING BOOM Specifications Engine Engine Model Rated Net Power @ 2,400 rpm ISO 9249/EEC 80/1269 Gross Power ISO 14396 Bore Stroke Displacement
Service Refill Capacities Cat C3.3B* 48.5 kW
65 hp
49.7 kW 94 mm 120 mm 3.33 L
66.6 hp 3.7 in 4.7 in 203.2 in3
*Meets U.S. EPA Tier 4 Final and EU Stage IIIB emission standards.
Weights Operating Weight with Cab
8400 kg
18,519 lb
• Weight with rubber tracks, bucket, operator (75 kg/165 lb), full fuel and auxiliary lines. • Weight varies depending on machine configuration.
Swing System Machine Swing Speed Boom Swing – Left Boom Swing – Right
11 rpm 60° 50°
125 L 14 L 11.2 L 82 L 94 L
33 gal 3.7 gal 3.0 gal 21.7 gal 24.8 gal
150 L/min 28 000 kPa 28 000 kPa 24 000 kPa
39.6 gal/min 4,061 psi 4,061 psi 3,481 psi
128 L/min
33.8 gal/min
64 L/min 40.1 kN 35.1 kN 60.2 kN
16.9 gal/min 9,015 lb 7,891 lb 13,534 lb
Hydraulic System Pump Flow at 2,000 rpm Operating Pressure – Equipment Operating Pressure – Travel Operating Pressure – Swing Auxiliary Circuit – Primary (186 bar/2,734 psi) Auxiliary Circuit – Secondary (174 bar/2,524 psi) Digging Force – Stick (standard) Digging Force – Stick (long) Digging Force – Bucket
• Load sensing hydraulics with variable displacement piston pump.
Blade
• Automatic swing break, spring applied, hydraulic release.
Travel System Travel Speed High Low Maximum Traction Force High Speed Low Speed Gradeability (maximum) Ground Pressure
Fuel Tank Cooling System Engine Oil Hydraulic Tank Hydraulic System
5.1 km/h 2.8 km/h
3.17 mph 1.74 mph
64.5 kN 37.4 kN 30° 36.3 kPa
14,500 lb 8,408 lb 5.26 psi
• Each track is driven by one independent 2-speed motor. • Drive modules are integrated into the roller frame for total protection. • Straight line travel when tracking and operating the front linkage simultaneously.
Width Height Dig Depth Lift Height
2320 mm 450 mm 360 mm 380 mm
91.3 in 17.7 in 14.2 in 15.0 in
Cab Dynamic Operator Sound Pressure Average Exterior Sound Pressure
70 dB(A) ISO 6396 99 dB(A) ISO 6395 – Dynamic Test
Operating Specifications Stick Length – Standard Stick Length – Long Machine Overhang Machine Overhang with Counterweight Counterweight
1670 mm 2210 mm 279.4 mm 406 mm 251 kg
5 ft 6 in 7 ft 3 in 11 in 16 in 551 lb
308E2 CR SB Mini Hydraulic Excavator with Swing Boom 7
8
5 6 12
11 13
9 10
14 15
2 1 16 19
17 18 3 4
Dimensions Standard Stick 1
4150 mm
2 3
Long Stick
Standard Stick
Long Stick
13'7"
4690 mm
15'5"
11
2280 mm
7'6"
2230 mm
7'4"
2980 mm
9'9"
3550 mm
11'8"
12
6820 mm
22'9"
7350 mm
24'1"
13
2550 mm
8'4"
2550 mm
8'4"
735 mm
2'5"
735 mm
2'5"
4
7020 mm
23'0"
7540 mm
24'9"
14
2903 mm
9'6"
2903 mm
9'6"
5
6640 mm
21'9"
6990 mm
22'11"
15
6380 mm
20'11"
6340 mm
20'10"
6
4670 mm
15'4"
5010 mm
16'5"
16
1010 mm
3'4"
1010 mm
3'4"
7
2800 mm
9'2"
3280 mm
10'9"
17
635 mm
2'1"
635 mm
2'1"
8
1450 mm
4'9"
1450 mm
4'9"
18
450 mm
1'6"
450 mm
1'6"
9
420 mm
1'5"
420 mm
1'5"
19
2320 mm
7'7"
2320 mm
7'7"
10
320 mm
1'1"
320 mm
1'1"
Lift Capacities at Ground Level* Lift Point Radius
4000 mm (13'1")
6050 mm (19'10")
Front
Side
Front
Side
Blade Down
kg lb
3650 8,046
1710 3,770
1880 4,144
920 2,028
Blade Up
kg lb
1840 4,056
1530 3,373
970 2,138
820 1,808
* The above loads are consistent with hydraulic excavator lift capacity rating standard ISO 10567:2007 and they do not exceed 87% of hydraulic lifting capacity or 75% of tipping capacity. The excavator bucket weight is not included on this chart. Lifting capacities are for standard stick.
2
308E2 CR SB Mini Hydraulic Excavator with Swing Boom STANDARD EQUIPMENT 1-way and 2-way (combined function) auxiliary hydraulic lines Adjustable auxiliary flow control for work tools Adjustable wrist rests Air suspension, heated seat Alternator Anti-theft security system Automatic engine idle Automatic swing park brake Automatic two speed travel Auxiliary line quick disconnects Cab mounted work light Cab, ROPS ISO 12117-2 with radio ready mounting, A/C, heater/ defroster, interior light and windshield wiper/washer Coat hook COMPASS display panel Cup holder Control pattern changer (not available in Europe)
Continuous flow Dozer blade with float function Eco mode setting for up to 20% fuel savings Floor mat Foot travel pedals High ambient cooling (standard in all regions except Europe) Horn Hydraulic oil cooler Lifting bar on bucket linkage (standard in U.S. only) Low maintenance linkage pin joints Maintenance free battery Rearview mirror Retractable seatbelt Standard stick “Thumb ready” sticks (standard equipment for all regions except Europe) Travel alarm (optional in Europe)
OPTIONAL EQUIPMENT AM/FM radio with auxiliary input (optional in Europe, standard for all other regions) Block heater Boom and stick check valve Boom mounted light – right side Dozer blade with bolt on cutting edge Dual lock hydraulic coupler (available from dealer) Dual lock mechanical coupler (available from dealer) Ecology drain valve for hydraulic tank Extra counterweight for extreme lifting applications – 251 kg (553 lb) Footrest Front window mesh guard
Front window steel bar guard Hydraulic quick coupler lines Lifting eye on bucket linkage (optional in all regions except the U.S.) Overhead guard (TOPGUARD Level 2) Rain guard Secondary auxiliary hydraulic lines Standard or long stick Track options: • Rubber belt – 450 mm (18 in) • Steel track – 450 mm (18 in) • Steel track – 600 mm (24 in) • Steel track with rubber pads – 450 mm (18 in)
3
308E2 CR SB Mini Hydraulic Excavator with Swing Boom
For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com © 2013 Caterpillar Inc. All Rights Reserved Printed in U.S.A. Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options. CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow” and the “Power Edge” trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
AEHQ7043 (04-13)
