Transcript
WALL MOUNT WEATHERPROOF HORN/STROBE
FHS-340R-WP
Features • • • • • • • • • • • •
UL and C-UL listed 12 VDC with 15, 35 or 60 cd settings 24 VDC with 15, 35, 60, 75, 95 or 110 cd settings Outdoor and indoor 6 distinctive candela settings Candela selection view window 15/75 ADA compliant on 60cd setting 33 sound output settings Horn or chime sound output Pre-wire back plate Universal back plate mounting (single gang, double gang, octagon, or 4” square) Single screw mounting
Description
Engineering Specifications
The FHS-340R-WP Horn/Strobe provides a wide range of candela light output options in a single device. The candela settings include a 12 or 24 volt DC operation for the 15, 35 and 60 (75 on axis) candela settings and 24 volt DC operation for the 15, 35, 60, 75, 95 and 110 candela settings. The candela setting is displayed through the front window and is selectable using a drum wheel. The strobes can be synchronized using a control panel with the Mircom (Amseco) sync protocol or an SDM-240 sync module.
The installer shall provide and install the FHS-340RWP selectable horn/strobe. The strobe shall have six (6) candela settings. The candela settings shall be selectable using a drum roller and shall display the candela setting on the front of the device. The horn shall have 33 selectable settings configurable by dip switches. The sounder shall be capable of ANSI Temporal Code 3, March Time and produce a chime output. The horn shall have three distinct volume levels. The horn/strobe shall operate at 12 or 24 VDC regulated or full wave rectified. The horn/strobe shall have an operating range between 8 and 33 VDC. The strobes can be synchronized using a control panel with the Mircom(Amseco) sync protocol or an SDM-240 sync module. The horn/strobe shall utilize a mounting plate that allows the installer to pre-wire the mounting plate. The FHS-340R-WP is listed for both outdoor and indoor applications. For outdoor installations, the device must be mounted on the matching weatherproof backbox. The mounting plate shall be completely covered by the horn/strobe and shall be secured by a single screw. The horn/strobe shall be UL listed to standard 1638, General Signaling, and standard 1971, Signaling Devices for the Hearing Impaired. In addition, the horn/strobes shall be C-UL listed to CAN-ULC S526. The horn shall be UL listed to standard 464, Audible Signaling Devices.
The horn settings include Temporal, Non-Temporal, March Time and a Chime sound. The horn also has Low, Mid and High volume settings for each pattern and tone. The tones include 2400 Hz, ElectroMechanical and Broadband. The voltage input can be either regulated DC or full wave rectified (FWR) 12 volt or 24 volt operation with an operating range of 8 to 33V DC. The FHS-340R-WP utilizes a universal mounting plate. The back plate allows the installer to mount the plate and terminate the wire connections. The horn/strobe attaches in a hinge fashion from the top and is secured by a single mounting screw. The horn/ strobe completely covers the mounting back plate, therefore it can be mounted before other trades work is completed and not affect the final look. The FHS-340R-WP is listed for both outdoor and indoor installations and comes complete with a matching weatherproof back box.
S5375
CATALOG NUMBER NOT TO BE USED FOR INSTALLATION PURPOSES.
5271
Mircom reserves the right to make changes at any time without notice in prices, colours, materials, components, equipment, specifications and models and also to discontinue models.
Installation A jumper plug is provided to test for correct wiring in the supervisory mode only. Do not pass alarm current through the jumper. Note: Installation must comply in accordance with applicable standards.
Selector Switch FHS-340-WP c/w Weatherproof Backbox
Light Output Light output in precentage when measured from the following directions per UL 1971.
High voltage may be present inside the light assembly even though power is not connected. If access to the component board is required (removal or replacement), the capacitor must be discharged by touching a wire to both ends of the flash tube. DO NOT attempt to touch or move the assembly until the capacitor has been discharged.
Dipswitch Settings
Specifications Strobe Current
Horn Dipswitch
Max. RMS Operating Current (mA RMS)
Pattern
Reg. 12 VDC
Reg. 12 FWR
Reg. 24 VDC
Reg. 24 FWR
1 ON - Non-temporal
Setting
Light Output
1
15cd
129
185
100
102
2
35cd
160
214
135
161
1 and 2 ON = March Time Tone
1 OFF - Temporal
ON
1
2
3
60/75cd
193
239
171
202
4
75cd
NA
NA
190
228
5
95cd
NA
NA
211
255
3 ON and 4 OFF = Electromechanical
6
110cd
NA
NA
225
284
3 and 4 OFF = Chime
12/24V
UL Designation
Regulated 12 DC/ Regulated 24 DC/ FWR FWR 8 - 17.5V
Flash Rate Sync Module (SDM-240) Operating Temperature Range
16 - 33V
60 times/min. N/A
4
5
6
7
8
3 and 4 ON = 2400Hz
3 OFF and 4 ON = Broadband
Voltage
Operating Voltage Range
3
Both 2 = OFF
Available
Volume 5 and 6 ON = High 5 ON and 6 OFF = Mid 5 and 6 OFF = Low 7 and 8 ON = Horn/strobe on 2 wires 7 and 8 OFF = Horn and strobe on 4 wires
Indoor installations: 32°F to 120°F (0°C to 49°C) Outdoor installations: -40°F to 151°F (-40°C to 66°C)
NOT TO BE USED FOR INSTALLATION PURPOSES.
CAT. 5271 page 2 of 4
Specifications Non-Temporal Horn Current
Pattern
Volume
2400 Hz
Electro-Mechanical
Broadband
Chime
dBA Reverberant Ratings per UL464 (dBA @ 10 ft.)
Max. RMS Operating Current (mA RMS Current)
dBA Anechoic Ratings per CAN/ULC S525 (dBA @ 10 ft.)
Reg 12 VDC
Reg 12 FWR
Reg 24 VDC
Reg 24 FWR
Reg 12 Reg 24 Reg 12 Reg 24 VDC/FWR VDC/FWR VDC/FWR VDC/FWR
High
119
79
87
125
87
87
99
100
Mid
44
46
28
74
82
82
94
96
Low
30
30
18
41
79
80
92
92
High
118
77
81
121
86
87
100
100
Mid
43
43
26
67
82
84
96
97
Low
27
29
16
36
79
80
93
93
High
146
125
78
148
86
86
101
102
Mid
41
63
26
64
81
82
96
98
Low
28
40
16
39
77
79
94
95
High
27
35
21
27
70
70
86
86
Mid
11
15
8
13
62
62
79
80
Low
9
11
7
12
58
57
75
75
Temporal Horn Current
Pattern
2400 Hz
Electro-Mechanical
Broadband
Chime
dBA Reverberant Ratings per UL464 (dBA @ 10 ft.)
Max. RMS Operating Current (mA RMS Current)
Volume
dBA Anechoic Ratings per CAN/ULC S525 (dBA @ 10 ft.)
Reg 12 VDC
Reg 12 FWR
Reg 24 VDC
Reg 24 FWR
Reg 12 Reg 24 Reg 12 Reg 24 VDC/FWR VDC/FWR VDC/FWR VDC/FWR
High
124
70
87
132
82
82
100
100
Mid
46
38
30
83
77
79
95
96
Low
30
28
18
36
74
75
92
92
High
114
69
80
134
83
82
100
101 96
Mid
42
40
27
67
78
80
95
Low
28
27
16
36
75
76
93
93
High
151
117
80
146
82
82
101
102
Mid
45
59
26
73
77
78
97
98
Low
30
42
16
31
75
76
94
95
High
29
35
21
28
68
70
86
86
Mid
10
17
9
12
61
61
79
79
Low
9
12
8
9
55
55
75
76
March Time Horn Current Max. RMS Current (mA RMS Current) Pattern
Volume Reg 12 VDC
2400 Hz
Electro-Mechanical
Broadband
Reg 12 FWR
Reg 24 VDC
Reg 24 FWR
dBA Reverberant Ratings per UL464 (dBA @ 10 ft.)
dBA Anechoic Ratings per CAN/ULC S525 (dBA @ 10 ft.)
Reg 12 Reg 24 Reg 12 Reg 24 VDC/FWR VDC/FWR VDC/FWR VDC/FWR
High
121
70
92
132
83
84
99
Mid
47
39
31
76
79
81
95
96
Low
36
25
19
35
76
77
92
92
High
114
69
86
125
83
83
100
100
Mid
42
37
27
67
80
81
95
96
Low
30
26
19
37
77
77
92
93
High
153
121
77
126
83
84
101
102
Mid
42
55
28
56
79
80
97
98
Low
29
42
16
26
76
77
94
95
NOT TO BE USED FOR INSTALLATION PURPOSES.
100
CAT. 5271 page 3 of 4
Dimensions WEATHERPROOF BACK BOX OPTIONAL OUTDOOR OPTIONAL BBX-5BBX-5 OUTDOOR BACKBACK BOX BOX (included with FHS-340R-WP)
OPTIONAL BBX-5 OUTDOOR BACK BOX 3.374 (85.7)
3.374 (85.7)
3.374 (85.7)
6 5/64 (154.4)
6 5/64 (154.4)
3.374 (85.7) 3.374 (85.7)
6.515 (165.5)
FHS-340R-WP HORN/STROBE
6.515 (165.5) 3.374 (85.7)
Inches (mm)
5.5 (139.7) 5.5 (139.7)
2 5/16 (59)
Front View 6.208 (157.7)
Back View Back View
BottomBottom View View
Back View
2 (50.8)
2 5/16 (59)
Back View
Front View Front View 6.208 (157.7) 6.208 (157.7) 5.5 (139.7)
0.905 (23)
3.374 (85.7)
3.374 (85.7)
5 (127)
6.515 (165.5)
5 (127)
Bottom View
Wiring Diagram FHS-340-WP
(FHS-340)
FHS-340-WP
SDM-240
FHS-340-WP
SDM-240
SDM-240
Ordering Information Model Number
Description
FHS-340R-WP
Wall Mount Weatherproof Horn/Strobe c/w weatherproof backbox, Red NOT TO BE USED FOR INSTALLATION PURPOSES.
Distributed by:
Canada 25 Interchange Way Vaughan, Ontario L4K 5W3 Telephone: (905) 660-4655 Fax: (905) 660-4113 Web page: http://www.mircom.com
U.S.A. 4575 Witmer Industrial Estates Niagara Falls, NY 14305 Toll Free: (888) 660-4655 Fax Toll Free: (888) 660-4113 Email:
[email protected]
CAT. 5271
Rev. 1
