Transcript
2012 Catalog
Hello Again! As we start what will be our 18th year serving the military and law enforcement community, I cannot tell you how pleased I am with the results from 2011 and I am impatient to once again knock it out of the part in 2012. Some of our recent accomplishments include: 1. Continued advances with our lines of Surface ANVIS Mounts and Ruggedized ANVIS Mounts. We have gone head-to-head with some very powerful (some would have said undefeatable) competitors on contracts this last year and we emerged victorious in most cases. 2. Development of our new SENTINEL goggle is completed and the initial response has been “why didn’t anyone else build this?” Yes, it’s that good. You can buy the SENTINEL kit to repair or upgrade your broken ANVIS or PVS-15s into ruggedized goggle with superior design features or you can buy a whole goggle system including an option for gated unfilmed image intensifier tubes and have the best goggles in the world—period. 3. Our becoming a Distributor for CEJAY Engineering and spearheading the advertising and distribution of the new HERO marking beacon and distraction device. Check this new product out ASAP. Any more and we’d be bragging, so I’ll stop there. As always we remain at the service of the warfighter and law enforcement officer. Please never hesitate to contact us for information or help. Best Regards, Chris Adams President, Adams Industries, Inc.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
NEW PRODUCTS FOR 2012! Check out the exciting new offerings from Adams Industries: 1. We are now a Distributor for CEJAY Engineering (Pg. 4). 2. Check out the new HERO marking and distraction device (Pg. 5). 3. The new SENTINEL line of night vision goggles. Binocular infantry goggles done RIGHT (Pg. 11). 4. New A.I. helmet mount for the FLIR M24 (Pg. 25). 5. New FLIR T70 & T75 Thermal Weapon Sights (Pg. 27).
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
CEJAY ENGINEERING
Adams Industries is proud to announce that we have become a Distributor for the complete line of CEJAY Engineering beacons, markers, lights, etc. Please send us your request for any CEJAY Engineering products and we will quickly get you pricing and delivery information.
CEJAY ENGINEERING
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
THE HERO Hero is a versatile reusable distraction device and marking tool employing multi-directional bright light flashes and a ~130dB tone sound which can be seen and heard over considerable distance. It is compact, extremely rugged, and able to withstand deployment from low flying aircraft, moving vehicles, and unforgiving environments such as prison cells. Designed in partnership with DEA officers to mark ground objects of interest from airborne platforms, the Hero is deployed as part of our ongoing war against illegal drug trafficking. When activated, the Hero first emits a constant sound and rapid light flashes for maximum affect. After sixty seconds, Hero begins emitting a single light flash per second and constant beeping sound for ease in location and recovery. As a distraction device, the HERO is best deployed in small enclosed areas to distract adversaries and provide the time needed to make successful entry. The HERO also works very well as a training device and is much easier on participants than flashbangs. The HERO housing is made of high strength nylon and will stand up to multiple deployments.
HERO DISTRACTION DEVICE/BEACON
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
AI/PVS-14 The AI/PVS-14 is our version of the PVS-14 with superior tube performance and superior warranties based on model. The AI/ PVS-14 offers the latest state of the art capability in a package that meets the rigorous demands of government users. It can be head mounted, helmet mounted, camera mounted, weapon mounted, and/or used as a hand held monocular. The AI/PVS-14 is available in several models with both commercial and mil-spec tube options. Export models also available. Contact us for details. Ask for the “Weapon Mount” package by specifying “-WM” in your requirement and you’ll receive the shuttered eyeguard and weapon mount. Request the “Deployment Ready” package by specifying “-DR” in your requirement and you’ll receive everything needed for immediate deployment.
NIGHT VISION MONOCULARS
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
AI/PITBULL The new Adams Industries’ Pitbull was designed for the U.S. Army in response to the need for a smaller and lighter pocket scope that is ruggedized and uses in-stock ANVIS-9 image intensifiers and optics but also accepts standard AN/PVS-14 accessories. The Pitbull accomplished both these goals admirably and includes upgrades to current systems such as using the 3V Lithium battery (DOD Standard) for longer operating time and smaller size and the ability to mount the PVS-7 IR illuminator focusing lens for greater versatility of the IR illuminator. Law Enforcement Agencies—if you received surplus ANVIS-9s and now don't know what to do with them—we can turn each unit into TWO Pitbulls and you can use standard mounts. The Pitbull is available to military and law enforcement customers as a complete unit or as a build kit. We can also build your Pitbull using your MX10160 image intensifier and ANVIS optics. Pitbull models are available with commercial, mil-spec, and exportable image intensifiers.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
BADGER The new Adams Industries’ BADGER is a form & fit equivalent to the PVS-14 but is powered by two AA batteries for longer battery life. The BADGER uses PVS-14 style optics and accepts all PVS-14 accessories, making it a natural for users accustomed to the PVS-14. Its three position switch includes off, on, and on-IR functions and when the unit’s IR illuminator is functioning a red LED warning light shows inside the field of view. The BADGER is perfect for government operators and government contractors that need cost effective performance in a compact package and parts interchangeability with existing systems.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
MONGOOSE Until now obtaining inexpensive night vision meant buying equipment from Russia with suspect performance and questionable product support. Now Adams Industries brings you the MONGOOSE, a low cost night vision product available in Gen. 2+ or Gen. 3, and not one part on any MONGOOSE comes from the Former Soviet Union. The MONOGOOSE is a commercial product but it is still built to the same rugged specifications you expect from every Adams Industries product. Contractors deploying with the MONGOOSE can be assured that they are using a quality piece of night vision and police officers who use the MONGOOSE in their duties know that they are getting the same performance normally found in much more expensive night vision products. The MONGOOSE can be used with standard PVS-14 accessories making it easy to support from standard logistics chains in the field.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
M3NV The M3NV is a compact, high performance, versatile night vision system. In its standard configuration, the M3NV is a handheld night vision pocketscope with 27mm ocular and 27mm objective lenses (providing 1 x system magnification). However, the user can select from among combinations of different lenses and adapters to reconfigure the system to suit a particular mission. The pocketscope is available with Generation II, SuperGen, or Generation III image intensification. The unique design provides an exceptional degree of flexibility. For example, the pocketscope can be used as a surveillance device, for low-level photography, or when attached to a head mount accessory, as a hands-free system for covert operations. It can also be converted into a night vision weapon sight. Unlike other pocketscopes, the housing design of the M3NV permits the use of simple adapters to couple the system to any refractive or catadioptric objective lens, of any focal length, that may be desirable for a particular application.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
AI/SENTINEL Brand new from Adams Industries! The SENTINEL is a goggle project in response to the ground forces deployment of ANVIS goggles and the resulting combat breakage of using a system designed for use in a cockpit in environments it was never intended for. In essence, the SENTINEL can be described as an up armored ANVIS system for ground use. The SENTINEL is manufactured of SOLID ALUMINUM but still remains lighter than a PVS-15. SENTINEL kits for redeployment of down systems include configurations to repair and ruggedize ANVIS-6, ANVIS-9, and PVS-15 systems. The SENTINEL is available with fieldswappable dovetail and ball-and-plunger mounting solutions and is compatible with the AI-SAM series of ruggedized mounts. SENTINEL Systems are available with the choice of ANVIS or PVS-14 style optics and either automatic or manual gain control. The SENTINEL—finally a night vision goggle rugged enough for the REAL WORLD.
NIGHT VISION GOGGLES
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
AI/PVS-15 Operators are unanimous in their appreciation of the AI/PVS-15 night vision goggle. This rugged and lightweight twin tube goggle offers increased spatial awareness for ground operators usually only found in aviator systems. The AI/PVS-15 series of goggles uses mil-spec optics and housing for a light, ruggedized, and waterproof unit. Our systems are even more potent due to our use of unfilmed L3 and ITT PINNACLE Image intensifiers. The AI/PVS-15 goggles provides all of the advantages of other PVS-15 system without the long wait for delivery or difficult to justify prices. Systems are available in a variety of configurations to match every need. Specify –FM for a face mask or –HM for a helmet mount.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
ANVIS Adams Industries goes beyond just selling pre-kitted ANVIS systems like the other companies in this business. We go the extra mile in many ways: Parts: A.I. stocks ANVIS parts and supports several of the aviation shops that service and certify ANVIS goggles. Support: A.I. not only helps keeps ANVIS systems flying, but also supports re-tasked ANVIS systems. Ask about our ANVIS overhaul service for 1033 program goggles. We can take that piece of junk your department got for “free” and make it a valuable asset to your agency. Manufacturing: A.I. manufactures the Rugged ANVIS Mount for flight use and the Surface ANVIS Mount for ground use. We also make the only battery pack worth taking into ground operations—the Air/Ground Warrior Battery Pack.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
RUGGED ANVIS MOUNT Adams Industries is proud to introduce its series of helmet mounts for attaching ANVIS flight goggles to a variety of flight helmet systems. The RAM or Ruggedized ANVIS Mount. No aviation mount on the market today can take the abuse the RAM can and that is of unquestioned importance in a military environment. The standard AI Ruggedized ANVIS Mount (AI/RAM) is the base for all our systems and features an all new manufacture ANVIS style mount which is properly spaced to hold the ANVIS style goggle in the appropriate position when mounted to most flight helmets. This mount will attach to most helmets using the standard four screw mounting method, and can be provided as a quick release as well. Adams Industries helmet mounts do not interfere with headsets and can be used with most helmet shields that are configured for ANVIS use. They are available in several configurations and can be ordered to fit almost any helmet system. Simply put there is no other helmet mount of this sort on the market that can be acquired as quickly and as cost effectively as the Adams Industries AI/RAM series of mounts.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
SURFACE ANVIS MOUNT Adams Industries is proud to introduce its series of helmet mounts for attaching ANVIS-6, ANVIS-9, and F5050/PVS-23 night vision goggles to most commonly available ballistic and non-ballistic protective helmets. The AI series of mounts provide a stable mounting platform for the night vision unit without sacrificing the utility of the helmet. The standard AI Surface ANVIS Mount (AI/SAM) is the base for all our systems and features an all new manufacture ANVIS style mount which is properly spaced to hold the ANVIS style goggle in the appropriate position when mounted to most military helmets. This mount will snap into any standard US MIL headmount plate and will also work with the NOROTOS® shroud mount. Adams Industries helmet mounts do not interfere with headsets and can be used with or without a helmet cover. They are available in several configurations and can be ordered to fit almost any helmet system. Simply put there is no other helmet mount of this sort on the market that can be acquired as quickly and as cost effectively as the Adams Industries AI/SAM series of mounts.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
AI/AGWBP The face of warfare and the equipment used in it is an ever changing environment where something that worked perfectly in its original application is found wanting in another. Current ANVIS battery packs are not water resistant, not rugged, and do not accept 3V lithium batteries. In a world where pilots and infantry soldiers are more commonly using ANVIS and PVS-23 systems in adverse conditions both on flight helmets and ground helmets, a new battery pack was needed; and here it is. The Air Ground Warrior Battery Pack (AI/AGWBP) is water resistant. It is rugged. It accepts BOTH AA and 3V Lithium batteries. The AI/AGWBP is the answer to the problems facing pilots, special forces, infantry and other forces in the field. The AI/AGWBP—Ready for deployment in the mud, in the rain, in the snow, IN THE REAL WORLD.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
AI/PVS-7 The AI/PVS-7 is our version of the PVS-7D and is available with many tube options for both the domestic and export markets. Built to withstand the rigors of battlefield use the AI/PVS-7 will withstand water immersion, operate hands free, and includes an infrared LED for use in complete darkness and assist in reading maps. An LED warning light is also built into the unit to remind the user that the infrared LED can be seen by others who are using night vision devices. A low battery warning light is built into the unit and there is a high light cutoff which will turn the unit off if it is left on during daylight conditions. The AI/PVS-7 runs on two AA batteries which power the unit for more than 40 hours. Ask for the “Deployment Ready” package by specifying “DR” in your requirement and you’ll receive everything needed for immediate deployment. We will help you identify the exact version of the AI/PVS-7 which is correct for your application, ask for details.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
FLIR T90 TANS The MilSight™ T90 TaNS® (Tactical Night Sight®) is a high-resolution Clip-on Night Vision Device (CNVD) that mounts on any MIL-STD-1913 rail interface forward of an existing scope, adding night vision capabilities to daytime target acquisition platforms. The TaNS® utilizes a Gated Gen 3 image intensifier tube, a fast f/0.9 catadioptric lens for a brighter and sharper image in starlight, and patented permanent boresight alignment technology. The unit is installed, operated, and removed without tools. The TaNS® features the proprietary and patent-applied-for Modular Utilitarian Power-Pack System™ (MUPPS™), a detachable, field-replaceable battery compartment that accommodates either AA or CR123 batteries. Also standard on TaNS® is a temperature-compensated low-battery indicator that appears intermittently in the operator’s field of vision (when approximately 30 minutes of battery service remains) but does not obstruct or otherwise interfere with the target image. The TaNS is Optimized for close combat assault rifles such as the M4; M16; HK416; and AK47. NIGHT VISION SIGHTS
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
FLIR T105 UNS The MilSight™ T105 UNS™ (Universal Night Sight™) AN/PVS22 is a high-resolution Clip-on Night Vision Device (CNVD) that mounts on any MIL-STD-1913 rail interface forward of an existing scope, adding night vision capabilities to daytime target acquisition platforms. The UNS™ utilizes a full MIL-SPEC Gen 3 (autogated pinnacle) image intensifier tube, a fast f/1.15 catadioptric lens for a brighter and sharper image in starlight, and patented permanent boresight alignment technology. The unit is installed, operated, and removed without tools and without affecting boresight (permanent boresight alignment). The unit can be mounted on a spotting scope for long range reconnaissance, hand-held as a Night Observation Device (NOD), or used in other night-time operations requiring night vision capabilities. Effective on all weapons and optimized for medium-range sniper weapons, assault rifles and machine guns, the UNS™ includes FLIR's proprietary Shock Mitigation System™ (SMS™), allowing the unit to be used on weapons up to and including .50 caliber bolt-action rifles.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
AN/PVS-24/M2124 The PVS-24/M2124 is a rugged, clip-on night vision device (CNVD) used by U.S. Special Operations Forces. The advanced design of the M2124 eliminates the typical requirement of removing a primary (day) sighting system since the CNVD mounts in line with a standard day optical sight. Combining day and night vision sights eliminates the need to re-zero, since the primary sight remains undisturbed. Additional advantages to supplementing a primary sighting system with the M2124 include maintaining a user’s consistent eye relief and shooting position as well as retaining user muscle memory. By operating the locking quick-disconnect, single-throw lever mounting system provided, the M2124 easily attaches to a MIL-STD-1913 rail interface system. The unit may also be used as a hand-held observation device and in conjunction with a spotting scope.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
FLIR S135 MUNS The MilSight S135 MUNS™ (Magnum Universal Night Sight™) AN/PVS-27 is a high-resolution clip-on night vision weapon sight that mounts on any MIL-STD-1913 rail interface forward of an existing scope, adding night vision capabilities to daytime target acquisition platforms. The MUNS™ utilizes a an extremely fast f/1.0 catadioptric lens for a brighter and sharper image in starlight, and patented permanent boresight alignment technology. The MUNS™ gathers twice as much light as the AN/PVS-22 Universal Night Sight™ (UNS™) and can be used against targets at 1.5 times the range of the UNS™. The unit is installed, operated, and removed without tools and without affecting boresight (permanent boresight alignment). The unit can be mounted on a spotting scope for long range reconnaissance, hand-held as a Night Observation Device (NOD), or used in other night-time operations requiring night vision capabilities. The MUNS is effective on all weapons up to .50 caliber equipped with an extended MIL-STD-1913 rail system and includes FLIR's proprietary Shock Mitigation System™ (SMS™).
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
M2124-LR The M2124-LR is the extended range version of the PVS24/M2124 clip-on night vision device (CNVD) used by U.S. Special Operations Forces. The advanced design of the M2124-LR eliminates the need to remove a primary (day) sighting system before switching to night operation. Combining day and night vision sights eliminates the need to re-zero, since the primary sight remains undisturbed. Additional advantages to supplementing a primary sighting system with the M2124-LR include maintaining a user’s consistent eye relief and shooting position as well as retaining user muscle memory. By operating the locking quick-disconnect, single-throw lever mounting system provided, the M2124-LR easily attaches to a MIL-STD-1913 rail interface system. The unit may also be used as a hand-held observation device and in conjunction with a spotting scope.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
FLIR RECON The FLIR RECON M18 is excellent for military and government use. Its compact package offers a choice of high resolution sensors (640x480 or 320x240) and accessories that make it a versatile performer. Standard to the M18 is 2x and 4x digital zoom for long distance observation. For greater ranges there is an afocal extender lens option to increase the range to detect. A standard 850nm 30mW infrared laser (government only) is used to identify targets to operators using night vision and the 0.5 mW mode makes the unit safe for training. There is a visible laser version which is not restricted for distribution, and a no laser version for those who prefer to remain completely covert. The M18 is a small rugged performer perfect for military and government use.
THERMAL VIEWERS
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
FLIR RECON M18 The FLIR RECON M18 is excellent for military and government use. Its compact package offers a choice of high resolution sensors (640x480 or 320x240) and accessories that make it a versatile performer. Standard to the M18 is 2x and 4x digital zoom for long distance observation. For greater ranges there is an afocal extender lens option to increase the range to detect. A standard 850nm 30mW infrared laser (government only) is used to identify targets to operators using night vision and the 0.5 mW mode makes the unit safe for training. There is a visible laser version which is not restricted for distribution, and a no laser version for those who prefer to remain completely covert. The M18 is a small rugged performer perfect for military and government use.
THERMAL VIEWERS
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
FLIR RECON M24 The FLIR RECON M24 is best described as a rough duty thermal pocketscope. This unit combines thermal performance with the small size and ruggedness usually only found in military night vision systems. The unit is easy to use and can be accessorized to meet many mission requirements. 2x and 4x zoom as well an optional afocal extender make the M24 capable of detecting targets at ranges not to be expected from such a small package. When size and weight are important, the M24’s performance is unmatched. Finally, the M24 can operate in environments where most thermal imagers cannot. It is rated to MIL-STD-810E and waterproof to 66’ for 2 hours.
CHECK OUT OUR NEW HEAD/HELMET MOUNT ADAPTER FOR THE M24!
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
FLIR T50 ACTS The ThermoSight T50 Advanced Combat ThermoSight (ACTS) is a short to medium range front mounted thermal imaging system designed to operate as a clip-on imager and as a rugged handheld unit as well. The T50 was designed to work with the Trijicon Advanced Combat Optical Gunsight (ACOG) to present the soldier with the same field of view and long range target acquisition while maintaining boresight. The unit works equally well with other day scopes as well. Smart intuitive features are found on this unit such as a shuttered eyeguard for surveillance use and large rugged single button controls—no complicated menus to navigate. The system is rated IP68 and will operate in the most extreme conditions. Commercially available CR123 batteries will power the unit for approximately nine hours of continuous use. The FLIR T50 is a handsome package and a proven performer not found wanting in the most demanding of situations and the most challenging of conditions. THERMAL SIGHTS
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
FLIR T70 & T75 Coming Q3—2012! The T70 &T75 are a new line of thermal imager inline weapon sights with 640x480 resolution that can also be used as a rugged handheld imager as well. An optional laser pointer can be used to identify targets to squad mates utilizing image intensified optics. Unlike previous in-line thermal weapon sights, the T70 &T75 can also be used as stand alone weapon sights. In this role they make the total size/weight package smaller than other thermal weapon sights available until now. Smart intuitive features are found on this unit such as a thumb operated mini-joystick to adjust and control the sight while keeping hands on rails, grips, triggers, ammo, etc. ugged single button controls—no complicated menus to navigate. The systems are rated IP67+ and will maintain integrity in 66 feet of seawater for up to two hours. Commercially available CR123 batteries will power the unit for approximately six hours of continuous use. The FLIR T70 & T75 promise to be the most impressive thermal weapon sights of 2012.
West Coast Office: (310) 472 www.AdamsIndustries.com٠ ٠East Coast Office: (540) 815 472--3017٠www.AdamsIndustries.com 815--1421
FROM:
Adams Industries, Inc. P.O. Box 641413 Los Angeles, CA 90064
TO:
