Catalog - Jk Audio

Transcript

TH ANNIVERSARY 2017 CATALOG Telephone Audio Interface Products JK Audio Interchange LTD™ pg. 35 TH ANNIVERSARY 2017 Marks 25 Years for JK Audio! “A lot has changed” would be an understatement, as we developed our unique place in the world of communications audio. While technology has certainly changed over the years, we adapted, bringing users the high quality and ease of use that you have come to expect from our products. As technology changes, new opportunities arise. Take our BlueDriver-F3 for example. Designed originally for the Radio reporter, this Bluetooth device has recently found its place as a wireless mic while shooting video on smart phones and tablets. While phone manufacturers “pull the 3.5 mm plug”, our Bluetooth HD Voice product line is enjoying a surge in applications. This year, we introduce Interchange LTD! Not only is it a combination of our top-selling Interchange and Innkeeper LTD, but we've added a common-sense keypad and a TRRS headset input for a quick call setup. Thank You for 25 years of trust! Joe Klinger President [email protected] Wireless Phone Compatibility Many JK Audio products provide a connection to a wireless (cell) phone. While our interface cables plug directly into the headset/earpiece jack on many phone models, there are some phones that are designed to prevent operation with third party accessories. In most cases, if you can use a generic, third party headset with your cell phone, you can use your JK Audio product as well. Also, while some wireless phones have an acceptable 2.5 mm or 3.5 mm jack, others require a headset adapter to convert their proprietary connector to an acceptable jack. JK Audio does not offer these adapters. Connect to Smart Phones The CN113 adapter cable is now shipping with select JK Audio products. This four-conductor, 3.5 mm headset adapter cable is compatible with most iPhones, Android phones, and notebook computers. The CN113 adapter cable allows audio to be sent through the headset jack of these new phones and notebooks, allowing send and receive of voice band audio during regular calls, or full bandwidth audio using third party codec applications. This cable ships with Daptor Two, ComPack, RemoteMix One, RemoteMix 2, RemoteMix 3.5, RemoteMix 4, RemoteMix x4, Interchange and Interchange LTD. Warranty JK Audio. Inc. 1311 E 6th Street, Sandwich, IL 60548 USA tel: 800.552.8346 +1.815.786.2929 fax: 815-786-8502 jkaudio.com HOURS OF OPERATION: Monday Thru Friday: 8:30-5:00 pm CDT JK Audio products are covered by a Two Year Warranty to be free from defective workmanship and materials. In the event that your JK Audio product needs repair, you must call us to get an authorization, and then carefully pack and ship it to us or the nearest authorized repair center. You will pay for shipping to us and we will pay for return back to you. No free repairs will be made if the defect was caused by misuse, weather conditions, or other causes, except for defective workmanship or materials. There are no expressed or implied warranties which extend beyond the warranty here made. Prices, features, and specifications subject to change without notice. JK Audio products are built with pride right here in Sandwich, Illinois USA. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by JK Audio, Inc. is under license. 2 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 Contents Handset Interfaces QuickTap™ THAT-2™ POTS Digital Hybrids 6 6 Wireless Audio Interfaces CellTap 4C™ Daptor Two™ Daptor Three™ BlueDriver-F3™ BlueDriver-M3™ 7 7 8 9 9 Desktop Digital Hybrids Broadcast Host™ BlueKeeper™ innkeeper PBX™ Universal Host™ 11 11 12 13 Auto-Answer Hybrids AutoHybrid™ AutoHybrid IP2™ innkeeper LTD™ 14 15 17 VoIP Digital Hybrids AutoHybrid IP2™ On The Web Be sure to check out our web site. • New Product Information • Frequently 17 18 19 POTS Talk Show System Guest Module™ Concierge 2x6™ 20 21 Remote Broadcasting RemoteMix One™ BluePack™ ComPack™ RemoteMix 2™ RemoteMix 3.5™ RemoteMix 4™ RemoteMix x4™ 22 23 24 25 26 27 28 Listen-Only IFB RemoteAmp™ RemoteAmp Two™ 29 29 Intercom Interfaces 15 Remote Control Interfaces Guest Module 1™ RIU-IP™ innkeeper LTD™ innkeeper 1rx™ innkeeper 2 & 4™ 16 16 BlueSet™ Interloop™ Outerloop™ Interchange™ Interchange LTD™ 30 32 33 34 35 New for 2017 Interchange LTD™ Intercom Phone Bridge + Digital Hybrid page 35 Asked Questions • Product Finder • Article Reprints • Trade Show Information Don't know where to start? | Next: Product Selection Assistant >> 3 Product Selection ASSISTANT What do you need to do? Record an Interview: Play Live or Recorded Audio into the Phone: Mobile Cell Phone Mobile Cell Phone BlueDriver-M3 9 11 BlueKeeper 23 BluePack CellTap 4C 7 RemoteMix One 22 Single Line Phone Broadcast Host 11 innkeeper 1rx 18 17 innkeeper LTD 6 QuickTap 6 THAT-2 Multi-Line Business Phone AutoHybrid IP2 innkeeper PBX QuickTap THAT-2 Universal Host 4 JK Audio 15 12 6 6 13 BlueDriver-F3 BlueKeeper BluePack Daptor Two Daptor Three RemoteMix One Broadcast Live Audio from the Field: Mobile Cell Phone 9 11 23 7 8 22 Single Line Phone AutoHybrid Broadcast Host innkeeper 1rx innkeeper LTD THAT-2 14 11 18 17 6 Multi-Line Business Phone AutoHybrid IP2 innkeeper PBX THAT-2 Universal Host 15 12 6 13 BlueDriver-F3 9 9 BlueDriver-M3 23 BluePack ComPack 24 Daptor Two 7 8 Daptor Three 22 RemoteMix One 25 RemoteMix 2 26 RemoteMix 3.5 27 RemoteMix 4 28 RemoteMix x4 Single Line Phone ComPack 24 RemoteMix 2 25 26 RemoteMix 3.5 27 RemoteMix 4 Multi-Line Business Phone ComPack 24 RemoteMix 3.5 26 27 RemoteMix 4 To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 Talk Show Systems: Connect a PA System to a Phone Line: Monitor IFB Program Audio: Multi-Line Business Phone Transmit Only Mobile Cell Phone AutoHybrid IP2 innkeeper PBX Universal Host AutoHybrid AutoHybrid IP2 BlueDriver-F3 Daptor Two Daptor Three THAT-2 15 12 13 Analog Phone Lines Concierge 2x6 Guest Module 2x6 21 20 Wireless Intercom Solutions: Mobile Cell Phone BlueSet Interloop Outerloop 30 32 33 Single Line Phone Interchange Interchange LTD 34 35 Multi-Line Business Phone Interchange 34 14 15 9 7 8 6 Listen-Only AutoHybrid AutoHybrid IP2 BlueDriver-M3 Daptor Two Daptor Three QuickTap THAT-2 14 15 9 7 8 6 6 Single Line or Business Phone System ComPack 24 THAT-2 6 Multiple Analog Phone Lines innkeeper 2 innkeeper 4 19 19 Balanced Program Line Full-Duplex, Talk and Listen AutoHybrid IP2 Broadcast Host Daptor Two Daptor Three innkeeper 1rx innkeeper 2 innkeeper 4 innkeeper LTD innkeeper PBX Universal Host BlueDriver-M3 9 23 BluePack ComPack 24 Daptor Two 7 8 Daptor Three 22 RemoteMix One 15 11 7 8 18 19 19 17 12 13 RemoteAmp RemoteAmp Two 29 29 Wet Party-Line Intercom BlueSet ComPack Interchange Interchange LTD Interloop Outerloop RemoteAmp Two 30 24 34 35 32 33 29 Let's Start Recording | Next: Handset Interfaces >> 5 1 2 3 4 5 6 7 8 9 * 0 # MIC 00:00:00 OR L R PLAY/REC MENU XLR OR RCA 2 3 4 5 6 7 8 9 * 0 # QuickTap™ THAT-2™ Quick and Simple. QuickTap gives you an easy way to record telephone interviews to your portable recorder or even directly to your computer sound card to be uploaded to your podcast. For group listen applications, the Output jack can be connected to a powered speaker or PA system. This jack contains a nice mix of both sides of the conversation. Handset Tap + Send Input. Connect the THAT-2 between your telephone and handset for quick access to audio in and out of the telephone. The THAT-2 is used by radio stations to record and play sound bites, and by TV and film sound crews to get IFB and dialog over phone lines. Telephone Handset Tap Telephone Handset Audio Tap HANDSET INTERFACES Plus More Control. A push-button selects whether FEATURES QT T2 »» Works with analog, digital, PBX, and VoIP telephones • • »» 3.5mm Mono Audio Out • »» XLR Input & Output • »» RCA Input & Output • »» Input & Output Level Control • »» Switch selects between carbon, dynamic or electret handset types • »» Passive Design No Battery or AC Required • • QT: QuickTap, T2: THAT-2 the handset audio or line input will be sent into the telephone. The output jacks contain a mix of audio from both sides of the conversation. The THAT-2 will emulate the type of microphone that is in the handset and allow you to send audio into many different types of analog and digital PBX sets, as well as ISDN or VoIP telephones. SPECIFICATIONS QT Output 1/8" (3.5mm) Mono: Size: Weight: Female XLR / RCA: 2” x 2” x 1.3” (5.1 x 5.1 x 3.3 cm) 3.4 oz. (100 g) 600-9000 ohms / 250 mV RMS; +12 dBu nom. Output Size: Weight: JK Audio 600 ohms / 100 mV RMS; -16 dBu nom. T2 Input Male XLR / RCA: 6 1 To find a Dealer, visit jkaudio.com 0-2500 ohms / 100 mV RMS; -18 dBu nom. 4.5” x 3.2” x 1.3” 9 oz. (250 g) call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 XLR OR TRS MIC 00:00:00 L R PLAY/REC MENU CODEC CellTap 4C™ Daptor Two™ Wireless Phone Audio Tap Wireless Phone Audio Interface Capture Both Sides of the Conversation. Remote Broadcasts or IFB feeds over a cell phone? Simply plug Daptor Two into the headset CellTap 4C is an interview recording adapter that’s compatible with most smart phones, tablets, and notebooks that use the 4-conductor 3.5 mm TRRS headset jack. Connect CellTap 4C between the existing ear-bud headset and phone, and then connect the stereo output to a mic level input on your recorder or mixer. The transformer coupled stereo output provides the local mic on the left channel and the caller on the right channel. The local audio is a full bandwidth connection. FEATURES CT D2 »» HD Voice Compatible (Wide-band Speech) • • »» 4-conductor 3.5mm Headset Interface • • »» 3.5mm Stereo Audio Output • »» Switch Selects Between Popular TRRS Configurations • »» Screwdriver Caller Level adjustment • jack of any wireless phone or notebook computer that accepts a third party headset or earpiece. Send and receive voice band audio from your mixer during regular calls, or full bandwidth audio using third party codec applications. You may use either the XLR input or 1/4" input, not both. Your device will recognize Daptor Two as a headset which will disable the internal mic and speaker. SPECIFICATIONS CT Output 1/8" (3.5mm) Mono: Size: Weight: Balanced Female XLR: • »» 3.5 mm TRRS Headset Jack • »» Passive Design No Battery or AC Required • 2” x 2” x 1.3” (5.1 x 5.1 x 3.3 cm) 3.5 oz. (100 g) 600 ohms / 250 mV RMS; -10 dBu nom. ; 0 dBu max Output • »» 1/4" Input & Output 600 ohms / 2.4 mV RMS; -50 dBu nom D2 Input Unbalanced 1/4" Mono: »» XLR Input & Output WIRELESS AUDIO INTERFACES OR Balanced Male XLR: Unbalanced 1/4" Mono: Size: 600 ohms / 45 mV RMS; -25 dBu nom. Mic Level 4.5” x 3.2” x 1.3” Weight: 9 oz. (250 g) • CT : CellTap, D2 : Daptor Two More: Wireless Audio Interfaces >> 7 SIDE VIEW OR Daptor Three™ FEATURES D3 F3 M3 • WIRELESS AUDIO INTERFACES Wireless Audio Interface »» HD Voice (Wide-Band Speech) • • XLR Connectivity for your Bluetooth Device. »» 3-pin Female XLR Input • • »» 3-pin Male XLR Output • • »» 3.5 mm Input • • »» 3.5 mm Output • Daptor Three is a simple, professional audio interface using Bluetooth Wireless Technology. Daptor Three connects to your cell phone like any other Bluetooth enabled headset. It will also connect to any other product, such as a laptop, that allows a wireless headset connection. Transmit, Receive or 2-way Handsfree. Daptor Three functions as either a Master or Headset device. In Master mode, Daptor Three connects to headsets or headset type devices, transmitting A2DP audio, or initiating a 2-way voice band connection to a headset. In Headset mode, Daptor Three connects to wireless phones, computers, or Bluetooth dongles, receiving A2DP audio or a 2-way Hands Free connection. • »» Trim Pot Adjusts Mic Level • »» Headset/Phone Switch • • »» Mini USB Power Jack • • • • »» > 18 Hours on one 9-volt Alkaline Battery • »» >6 hours on Internal Li-Ion Battery D3: Daptor Three, F3: BlueDriver-F3, M3: BlueDriver-M3 SPECIFICATIONS D3 F3 Input 3-pin Female XLR: Input Balanced Female XLR: 20k ohms / -4 dBu nom. 1/8" (3.5mm) Stereo: 20k ohms / -10 dBu nom. Frequency Response: Output 1/8" (3.5mm) Stereo: 1/8" (3.5mm) Stereo: 1/8" (3.5mm) Stereo: 3-pin Male XLR: 200 ohms / 0 dBu max 200 ohms / -6 dBu max Standard: 3.0 Bluetooth Profiles: Hands-Free (Full Duplex): 300 Hz– 3.4 kHz Hands-Free (Full Duplex HD): 50 Hz– 7 kHz A2DP (Master » Headset): 30 Hz– 17 kHz Range: 66 ft (20 m) Power: One 9-volt Battery Size: Weight: 4.5” x 3.2” x 1.3” (11.2 x 6.9 x 3.5 cm) End-to-End Latency: Range: Battery: Power: Size: 7 oz. (200 g) Weight: 8 JK Audio 1k ohms / -34 dBu nom. Bluetooth Wireless Technology F3 + M3 Frequency Response: 20k ohms / -10 dBu nom. Output Bluetooth Wireless Technology Standard: 1.1k ohms / -34 dBu nom. M3 Input HF = 300Hz - 3.4kHz A2DP = 30Hz - 17kHz Output Balanced Male XLR: 1k ohms / -34 dBu nom. To find a Dealer, visit jkaudio.com 3.0 Hands-Free (Full Duplex): 300 Hz– 3.4 kHz Hands-Free (Full Duplex HD): 50 Hz– 7 kHz A2DP (Master » Headset): 30 Hz– 17 kHz 150ms under Bluetooth A2DP Profiles 66 ft (20 m) Internal Lithium-Ion Polymer Rechargeable 120-240 VAC power supply (included) 1.1” x 4.4” (2.8 cm x 11.2 cm) 2.1 oz. (60 g) call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 BlueDriver-F3™ BlueDriver-M3™ Wireless Audio Interface Wireless Audio Interface Mic/Mixer Output to your Bluetooth Device. Pair to your Bluetooth enabled cell phone or headset to send audio to your Bluetooth device. The 3.5 mm stereo jack contains a mic level output suitable for recording, with the clean mic signal on the left channel and the Bluetooth return on the right. Bluetooth Device to Mic Input. Pair to your Bluetooth equipped cell phone or headset to get audio straight from your Bluetooth device into your Mic input. The 3.5 mm send jack will accept a signal from the headphone output of the mixer for transmission back to the cell phone or headset. BlueDriver-F3 Applications BlueDriver-M3 Applications M3-A F3-A WIRELESS AUDIO INTERFACES Power Send Power Rec Headset Connect 3™ er-F Driv ™ o Blue set Head JK ect Conn Phone F3-B Use a Wireless Mic with your Camera or Tablet. BlueDriver-F3 along with a professional video camera app, lets you record broadcast worthy interviews while placing the mic in the subjects hand for improved audio quality. BlueDriver-M3™ JK Audio™ Phone Audi M3-B MIC 00:00:00 L R PLAY/REC MENU Headset Mode vs. Phone Mode A switch on either unit selects between connection to a 3rd party Bluetooth headset, or a cell phone. Headset Connect: Pair BlueDriver to your 3rd party Bluetooth headset. Some Bluetooth headsets allow you to switch between your audio device and a cell phone. Phone Connect: Pair BlueDriver to your cell phone to call into the station or bring in caller audio. Need Caller Separation? | Next: Desktop Digital Hybrids >> 39 A H Y B R ID FOR EVERY D ESKTO P. Analog & Wireless/Cellular Turn your desktop into a professional broadcast center. Each Hybrid includes everything you need to get talk show quality phone recordings into your mixer or sound card with excellent caller separation. Broadcasting Made Easy. DESKTOP DIGITAL HYBRIDS Connect a mic and headphones for a simple broadcast back to the station. Already at the station? Use a JK Audio Digital Hybrid in your newsroom to record high quality interviews. Or, you can upload your recorded interview to your podcast. JK Audio Digital Hybrids allows you to send mic and line level signals, at a higher quality than the phone's mic and speaker, into the phone line while maintaining excellent separation between your voice and the caller. Interviews: Connect a professional dynamic mic and FEATURES BH »» Excellent Separation of Caller and Talent Voice • »» 16 bit DSP Technology • BK »» Bluetooth Wireless Technology »» Auto-Answer (Switchable On/Off) »» Proprietary Auto Null Algorithm (50 dB null) • • • headphones to a JK Audio digital hybrid to capture your voice in full audio bandwidth, while maintaining excellent separation between your voice and the caller »» Send XLR Line Input • • »» Mic/Line Switch • • Conference Room: Easily »» 3.5mm Mono Line Input • • connect your PA system to the telephone system. The echo canceller algorithm prevents feedback and allow full duplex conversations. Why a Digital Hybrid? The main function of any hybrid is to bring in the caller’s voice from the phone line, as clear and clean as possible. In the real world, when you send your voice down the telephone line it has a tendency to bleed over into the caller’s audio. The hybrid must adapt to the phone line in order to properly separate transmit and receive audio. We use a 16-bit DSP to monitor the phone line and audio signals continuously in order to deliver excellent separation. Our dual-convergence echo canceller algorithm can achieve excellent transhybrid loss, typically exceeding 50 dB, without any setup and without sending a burst of noise into the phone line. »» 3.5mm Stereo Line Input • »» Caller XLR Line Output • • »» 3.5mm Stereo Line Output • • »» 3.5mm Mono Mic Level Output • »» 3.5 mm Stereo Headphone Jack • • »» Send and Caller Signal Level LEDs • • »» Send and Caller Volume Controls • • »» Guest Module Remote Jack • BH: Broadcast Host, BK: BlueKeeper Professional Digital Hybrids pg. 18 innkeeper 1rx, innkeeper 2 and innkeeper 4 can be found on pg 18. Although a mixer is not required for the Desktop Digital Hybrids, it is required for the Professional innkeeper™ series and rackmount digital hybrids. 10 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 OR OR MIC OR 00:00:00 L R OR MIC 00:00:00 L R PLAY/REC MENU PLAY/REC MENU Broadcast Host™ BlueKeeper™ Our Most Popular Digital Hybrid. No Land-Line? Not a Problem. Analog Desktop Digital Hybrid Wireless Audio Gateway Broadcast Host provides connections for a microphone, headphones, mixer, sound card, telephone and your analog telephone line. An auxiliary telephone is only required to place outgoing calls. Broadcast Host features Auto-Answer/Auto Disconnect for use in IFB and monitoring applications. Remote Control. Control Broadcast Host with the Guest Module 1. See pg 16. It's the 21st century, if you replaced your home phone or you're always on the move, you can still get mic and line level audio in and out of your wireless phone. BlueKeeper pairs to your cell phone like a Bluetooth wireless headset. Simply connect your favorite microphone and headphones and enjoy an immediate improvement at both ends of the call. The professional microphone preamplifier provides a dramatic improvement in sound quality to the caller or back to the station if you are away from the studio. DESKTOP DIGITAL HYBRIDS GUEST MODULE 1 SPECIFICATIONS BK Input BH Input Balanced Female XLR: 1/8" (3.5mm) Mono: 1k ohms / 15 mV RMS; -34 dBu nom.; Mic/Line Pad Switch = +6 dBu max Balanced Female XLR: 20k ohms / 250 mV RMS; -10 dBu nom. 1/8" (3.5mm) Stereo: Output Balanced Male XLR: 1/8" (3.5mm) Stereo: Headphone 1/8" (3.5mm): Phone Line: RJ11C Aux Phone: RJ11C Ringer: Frequency Response: BH + BK 200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max; Caller Only 50 ohms / 250 mV RMS; +6 dBu max Left = Send; Right = Caller 8 ohms / 250 mW Mixed Send and Caller Isolation: Power: Size: Weight: 0.8B REN Telephone Side 200 Hz-3600 Hz Output Balanced Male XLR: 1/8" (3.5mm) Mono: 1/8" (3.5mm) Stereo: Headphone 1/8" (3.5mm): 7" x 6" x 1.6" (18 x 15 x 4.2 cm) 2.2 lbs. (1kg) 200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max; Caller Only 50 ohms / 15 mV RMS; -34 dBu nom. Mixed Send and Caller 50 ohms / 250 mV RMS; -10 dBu nom.; +6 dBu max Left = Send; Right = Caller 8 ohms / ½ watt per channel Mixed Send and Caller Bluetooth Standard: 3.0 Distance: 33 ft (10 m) 1500 VAC 120-240 VAC Power Supply 1k ohms / 15 mV RMS; -34 dBu nom.; Mic/Line Pad Switch = +6 dBu max 20k ohms / 250 mV RMS; -10 dBu nom.; +6 dBu max Frequency Response: Hands-Free (Full Duplex): 300 Hz– 3.4 kHz Hands-Free (Full Duplex HD): 50 Hz– 7 kHz A2DP (Master » Headset): 30 Hz– 17 kHz BH: Broadcast Host, BK: BlueKeeper Do you have an VoIP/PBX Line? | Next: VoIP/PBX Desktop Digital Hybrids >> 11 A HYBRID FOR EVERY DESKTOP. VoIP/PBX/USB CODEC OR 1 2 3 4 5 6 7 8 9 * 0 # MIC OR FEATURES DESKTOP DIGITAL HYBRIDS PBX UH »» Excellent Separation of Caller and Talent Voice • • »» 16 bit DSP Technology • • »» 16 bit USB Audio CODEC • »» Proprietary Auto Null Algorithm • • »» Send XLR Line Input • • »» Mic/Line Switch • • »» 3.5mm Mono Line Input • • »» Caller XLR Line Output • • »» 3.5mm Stereo Line Output • • »» 3.5 mm Stereo Headphone Jack • • »» Send and Caller Signal Level LEDs • • »» Send and Caller Volume Controls • • • • (50 dB null) »» Handset Selector Switch (Electret, Carbon, Dynamic) 00:00:00 L R PLAY/REC MENU innkeeper PBX™ VoIP/PBX Desktop Digital Hybrid The Broadcast Host for PBX Phone Lines. Innkeeper PBX easily converts your multi-line PBX type telephone system into a professional, affordable talk show console. Simply connect between your telephone handset and the phone base. So simple, anyone can do it. innkeeper PBX provides connections for a microphone, headphones, mixer, sound card, and telephone handset. The stereo output jack on the back of the unit provides your voice on one channel and only the caller’s voice on the other channel. The balanced XLR output jack contains only the caller’s voice. The Handset and Broadcast buttons select between talking on the handset, or sending and receiving through the audio connections. PBX: innkeeper PBX, UH: Universal Host Talk Shows: Connect between your console and your existing multi-line telephone. Screen callers from another phone while you take callers on the air by simply selecting available lines on your phone. 12 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 OR 1 2 3 4 5 6 7 8 9 * 0 # MIC 00:00:00 L R PLAY/REC MENU SPECIFICATIONS VoIP/PBX Desktop Digital Hybrid The Top-Notch Desktop Digital Hybrid Universal Host provides connections for a microphone, headphones, mixer, sound card, and telephone handset. The stereo output jack on the back of the unit provides your voice on one channel and only the caller’s voice on the other channel. The balanced XLR output jack contains only the caller’s voice. The Handset and Online buttons select between talking on the handset, or sending and receiving through the audio connections. A second switch selects between monitoring the caller or listening to the USB codec over the headphones. PBX + UH Universal Host™ Input Balanced Female XLR: 1/8" (3.5mm) Mono: The 16 bit USB audio CODEC allows stereo recording at up to 48 kHz sampling rate, with the talent voice on the left channel in full bandwidth, and the caller on the right. Play recordings from your computer directly into the phone system. 20k ohms / 250 mV RMS; -10 dBu nom. Output Balanced Male XLR: 1/8" (3.5mm) Stereo: Headphone 1/8" (3.5mm): 200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max; Caller Only 50 ohms / 250 mV RMS; -10 dBu nom.; +6 dBu max Left = Send; Right = Caller 8 ohms / 250 mW Mixed Send and Caller Phone Base: RJ22 Handset: RJ22 Isolation: 1500 VAC Frequency Response: USB CODEC for Full Bandwidth Streaming 1k ohms / 15 mV RMS; -34 dBu nom.; Mic/Line Pad Switch = +6 dBu max Power: Size: Weight: DESKTOP DIGITAL HYBRIDS OR Telephone Side 200Hz-3.6kHz 120-240 VAC Power Supply 7" x 6" x 1.6" (18 x 15 x 4.2 cm) 2.2 lbs. (1kg) USB *Universal Host Only Connector: Standard: Sampling Rate: Mini Type B Female v2.0 32kHz, 44.1kHz, 48kHz Next: Auto-Answer Hybrids >> 13 AutoHybrid™ Full Duplex Auto-Answer Hybrid Not just another half duplex auto-coupler. AUTO-ANSWER HYBRIDS This simple, passive, auto-answer/disconnect telephone line hybrid allows simultaneous send and receive audio through analog telephone lines. Suitable for monitoring remote locations, IFB feeds, and many simple studio, conferencing, and PA telephone interface applications. Full Duplex. Yes, you can send and receive audio at the same time. The dual transformer hybrid is capable of 20 dB nominal trans-hybrid loss. In other words, your transmit signal will appear mixed with the receive signal, but at a level 20 dB lower than it was sent into the phone line. Auto-Answer. The "Auto" feature is very simple. When the "Auto" switch is selected, AutoHybrid will answer on the first ring. The phone line will remain off-hook, until either the Drop button is depressed, or until the phone company releases the line. FEATURES »» Enable/Disable Auto-Answer »» Hybrid Null Adjust (Up to 20 dB Separation) »» Front Panel Off-Hook LED »» Send XLR Line Input »» Caller XLR Line Output »» Remote Control Terminals »» Optional RA4 Rack Mount Adapter »» Passive Design (No Battery or AC Required) SPECIFICATIONS Input Female XLR: Insertion Loss: 1k ohms / 500 mV RMS; -4 dBu nom.; +6 dBu max 11dB Send XLR to Phone Line Output Male XLR: 600 ohms / 200 mV RMS; -12 dBu nom. Off-hook control (+5VDC Momentary) Screw Terminals: Release Control (+5VDC Momentary) OH LED Signal (pulled to ground on OH) ACCESSORIES RA4™ Rack Mount Panel Phone Line: RJ11C Aux Phone: RJ11C Ringer: 0.8B REN Isolation: 1500 VAC Frequency Response: Telephone Side 200 Hz-3600 Hz Size: 4” x 5” x 1.5” (10.5 x 13 x 4 cm) Weight: 12 oz. The RA4 holds four AutoHybrids in a 1U rack space. 14 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 VoIP/AoIP Codec A Smooth Transition from POTS to IP. This simple product plays a critical role in studio interview, monitoring, and IFB applications. As the name implies, AutoHybrid IP2™ functions as a two-line VoIP hybrid. The desktop/half-rack design provides one button access to the common features of a phone line hybrid including: call control, auto-answer, and conference. Advanced call control features and VoIP line setup are provided through the internal web server. In VoIP mode, Line-level XLR jacks provide mono send and receive audio for Line 1 and Line 2. AutoHybrid IP2™ also functions as an Audio over IP (AoIP) Codec, streaming wide-band stereo audio. In AoIP mode, the XLR jacks provide stereo send and receive audio. The AutoHybrid IP2™ Remote jack allows easy connection to the JK Audio Interchange™ Intercom Phone Bridge, offering an auto-answer VoIP connection into your party-line intercom. Low power consumption for Power over Ethernet (PoE) applications. External power supply included for LAN connections without PoE capability. FEATURES »» Simple 2-Line VoIP Call Control, Auto-Answer, and Conference »» G.711, G.722 (HD Voice) VoIP Hybrid »» 24-bit AoIP Wide Band Stereo Codec »» Female XLR Line Input (2) »» Male XLR Line Output (2) »» Send and Receive LED Metering »» LAN, USB, Remote Control Connections »» Rear Panel Recessed Level Controls »» Remote Control I/O Terminal Block »» PoE or AC Mains Powered »» Optional RA2 Rack Mount Adapter SPECIFICATIONS Input Female XLR: 20k ohms / 500 mV RMS (-4 dBu nom) +12 dBu max Balanced Male XLR: 50 ohms / 500 mV RMS (-4 dBu nom) +12 dBu max Output Remote Jack: Remote Header: ACCESSORIES RA2™ Rack Mount Panel The RA2 holds two AutoHybrid IP2s in a 1U rack space. VOIP DIGITAL HYBRIDS AutoHybrid IP2™ Power: Size: Weight: RJ50 Proprietary interface to JK Audio products Removable screw terminal block: Call, Drop, Ring/OH LED, GND (x2) PoE (Power over Ethernet) or +9 VDC with included AC power supply 7.6” x 5.3” x 1.5” (20 x 14 x 4 cm) 1.2 lbs (0.5 kg) NETWORK Next: Professional Digital Hybrids >> 15 REMOTE CONTROL INTERFACES Guest Module 1™ Remote Keypad This little time-saver gives you call control you simply can't get with an auxiliary telephone and a couple of switches. An 8 pin RJ45 modular cable provides remote power so there is no need for batteries or an external power pack. The Call button will flicker when a call comes in. Press this button to answer or place a call. The button will stay lit when a call is present. When you dial on-air, the tones go out on the line, and do not come back mixed with the dial tone or caller signal. FEATURES »» Compatible with Broadcast Host, innkeeper LTD, and innkeeper 1rx »» DTMF Keypad »» Keypad Disable Switch »» Call & Drop Buttons »» Ring/Call LED »» Passive Design (No Battery or AC Required) SPECIFICATIONS Size: Guest Module 1 was designed exclusively for: Broadcast Host, innkeeper LTD, or innkeeper 1rx Weight: 4.75" x 3.4" x 2" (12 x 8.6 x 5 cm) 11 oz (300 g) FEATURES »» Compatible with innkeeper 1rx, innkeeper 2 and innkeeper 4 Digital Hybrids »» Ring Indicator for Each Line »» Call, Drop, Hold, Flash RIU-IP™ Remote IP Interface The RIU-IP is a remote control interface designed for innkeeper 1rx, 2 and 4 digital hybrids. This unit contains a web server which lets you send and receive control data through a web browser. RIU-IP can be connected to a computer NIC card for direct control, to a switch or hub for network control, or to an ethernet port with internet access. RIU-IP was designed exclusively for: Innkeeper 1rx, innkeeper 2 & 4 »» Dialing »» Conference (innkeeper 2 Only) »» Adjust Transmit and Receive level per line (innkeeper 2 & 4 Only) »» Auto-Answer on/off »» Auto-Answer Ring Count (innkeeper 2 and 4) »» Test Tone Start/Stop per Line »» Master Send Configuration (innkeeper 2 and 4) »» Presence On/Off (innkeeper 1rx) SPECIFICATIONS Control connection: RJ-50 RS-232 Serial Connection: DB9 (9600,8,N,1) Size: Weight: 16 RJ-45 Ethernet port Digital Hybrid Connection: 5" x 3.25" x 1.125" ( 13 x 9 x 3 cm) 1 lb. (450 g) »» Caller Ducking On/Off (innkeeper 1rx) »» Automatic Gain Control on/off (innkeeper 1rx) »» Enable/Disable Auto-Answer Digital Auto-Answer Hybrid »» Excellent Separation of Caller and Talent Voice Go digital for more desirable quality. »» 16-bit DSP technology »» Proprietary Auto Null Algorithm (50 dB null) »» Front Panel Off-Hook LED »» Send XLR Line Input »» Caller XLR Line Output 20k ohms / 500 mV RMS; -4 dBu nom.; +12 dBm max 16-bit DSP Technology. The digital hybrid connects audio signals to a standard analog telephone line without the transmit / receive crosstalk common to analog hybrids. Its Digital Signal Processor (DSP) continuously monitors both the phone line and audio signals to deliver excellent separation. This proprietary, dual-convergence echo canceller algorithm can achieve excellent separation, typically exceeding 50 dB, without any setup and without sending a noise burst down the line. While this may sound complicated, it’s all done automatically during every call. 200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max Remote Control. Control innkeeper LTD with the Guest Module 1. See pg 16. »» Send and Caller Signal Level LEDs »» Guest Module 1 Remote Control Jack »» Optional RA2 Rack Mount Adapter SPECIFICATIONS Input Balanced Female XLR: Output Balanced Male XLR: Phone Line: RJ11C Aux Phone: RJ11C Ringer: 0.8B REN Isolation: 1500 VAC Frequency Response: Power: Size: Weight: Compared to the AutoHybrid, the innkeeper LTD auto-answer/disconnect hybrid allows you to send line level signals into the phone line while maintaining greater separation between the talent's voice and the caller. The balanced XLR output jack contains only the caller’s voice, making this the perfect companion to mixers, consoles, and PA systems that demand talk show quality audio from a phone line. POTS DIGITAL HYBRIDS innkeeper LTD™ FEATURES Telephone Side 200 Hz-3600 Hz 120-240 VAC power supply (included) 7.6” x 5.3” x 1.5” (20 x 14 x 4 cm) GUEST MODULE 1 2.7 lbs (1.2 kg) ACCESSORIES RA2™ Rack Mount Panel The RA2 holds two innkeeper LTD's in a 1U rack space. Next: More Professional Digital Hybrids >> 17 FEATURES POTS DIGITAL HYBRIDS 1rx i2 i4 »» Excellent Separation of Caller and Talent Voice • • • »» 16 bit DSP Technology • • • »» Auto-Answer (Switchable On/Off) • • • »» Proprietary Auto Null Algorithm (50 dB null) • • • »» Conferencing • »» AGC, Ducking, Presence • »» 1 kHz Tone Generator • • • »» Memory/Speed Dial • • »» Alpha-Numeric Keypad • • »» Menu with Backlit LCD Display • • 2 4 »» Send XLR Line Input 1 »» Mic/Line Switch • »» Master Send XLR »» Caller XLR Line Output 1 »» Mix Out XLR Line Output • »» Front Panel 1/4" Headphone Jack • »» Monitor Handset Jacks innkeeper 1rx™ Digital Hybrid A Hybrid Jam-Packed with Features. This single-line hybrid is perfect for radio or television talk shows, teleconferencing, or auto-answer IFB feeds. From the front panel you can call, drop and adjust headphone volume. Front panel LEDs display signal levels and option status. The Send and Caller Volume controls and feature switches are hidden behind an access panel to prevent unauthorized “tweaking”. innkeeper 1rx is compatible with Guest Module 1 and RIU-IP remote control interfaces. For Talk Show applications combine innkeeper 1rx with the Concierge 2x6 Switch Core and Guest Module GM2x6 ( on page 21). Automatic Gain Control (AGC). Adjusts the caller volume to an average level. AGC will tame a loud caller, and boost a quiet caller or quiet long distance connection. Caller Ducking. Drops the Caller output level by 9 • • 2 4 dB whenever the host speaks. This keeps the host “in charge” of the show, automatically making sure the caller never overpowers the host by attempting to talk over the host’s voice. Presence. Press the “Presence” button to get a 2 4 »» Remote Control via Screw Terminals or RS-232 • • • »» RIU-IP Remote IP Interface • • • »» Monitor Speaker Terminals • »» Send and Caller Signal Level LEDs • • • »» Send and Caller Volume Controls • • • richer sound from the caller’s voice. This digital filter brings back some of the low-end lost in transmission. Remote Control. Control innkeeper 1rx with the Guest Module 1, Screw Terminals, a RS-232 cable or the RIU-IP Remote IP Interface. See pg 16. 1rx: innkeeper 1rx, i2: innkeeper 2, i4: innkeeper 4 OR GUEST MODULE 1 18 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 innkeeper 2 & 4™ 1rx Input Female XLR: When a Single Line Hybrid Isn't Enough. Innkeeper 2 / innkeeper 4 squeeze two/four independent digital hybrids in a 1U rack space to extract each caller's voice into separate channels. Each phone line has an individual send and receive XLR jack. While this should be enough for most applications, there are several applications that require a “Master” audio input. This additional XLR input mixes with the audio of the individual channel send jacks. By default, the master input will mix into all four channels. The front panel menu system allows you to turn off the master signal from any or all phone lines. For Talk Show applications combine innkeeper 2 with the Concierge 2x6 Switch Core and Guest Module GM2x6 ( on page 21). Output Male XLR: 1/4" Stereo Headphone: Speaker: Size: Weight: Balanced Female XLR: convenient conference feature that joins two active phone calls together. Menu options determine how the conference is joined, providing several options to ease mix-minus setup. 8 ohms, 250 mW per channel Screw Terminals, 8 ohms, 1 watt 1.75" x 7.3" x 19" (4.5 x 18.6 x 48.3 cm) 5.7 lbs (2.6 kg) 20k ohms/ 500 mV RMS; -4 dBu nom.; +10 dBu max Output Balanced Male XLR: Handset: Size: Weight: 1rx + i2/4 innkeeper 2 Conferencing. Innkeeper 2 has a 200 ohms / 500 mV RMS; -4 dBu nom.; +14 dBu max i2/4 Input Menu System. The front panel keypad, display, and handset jacks provide easy speed dialing and call setup. The menu driven keypad and back-lit display allows you to store 50 phone numbers by name in a phone list. You can also use the display to set features such as the number of rings before auto answer, master send channel selection, and test tone output. 1k ohms / 15 mV RMS; -34 dBu nom.; Mic/Line Pad Switch = +6 dBu max 200 ohms/ 500 mV RMS; -4 dBu nom.; +10 dBu max Front panel handset jacks biased for electret handset (not included) 1.75" x 7.3" x 19" (4.5 x 18.6 x 48.3 cm) 7.2 lbs (3.2 kg) Phone Line: RJ11C Aux Phone: RJ11C Ringer: 0.8B REN Isolation: 1500 VAC Frequency Response: Power: POTS DIGITAL HYBRIDS Multi-Line Digital Hybrids SPECIFICATIONS Telephone Side 200Hz-3.6kHz 120-240 VAC 50-60Hz power supply (internal) 1rx: innkeeper 1rx, i2/4: innkeeper 2 & 4 Remote Control. Control innkeeper 2/4 with the RIU-IP Remote IP Interface. See pg 16. Back: innkeeper 2 innkeeper 4 is the same, with additional lines and XLR inputs/outputs. Need more lines? | Next: Concierge Talk Show System >> 19 Concierge™ Talk Show System Guest Module™ Control Surfaces Simple on the Outside. Up to eight Guest Module control surfaces can be added to provide remote control of the switch matrix over CAT5 cable. Guest Modules are hot swappable without losing calls, and feature line selection buttons that change color to indicate call status. Guest Modules are available in GM1x6, GM2x6, and GM1x12 desktop and rack mount versions. They feature durable aluminum and steel construction with a sealed rubber keypad. FEATURES »» LED Line Selection Buttons »» Next, Previous, Hold & Drop Functions »» Auto Answer »» Conference Calling (not on GM1x6) »» Hot-Swappable »» Aluminum and steel construction »» DTMF Keypad GM: Guest Modules, C: Concierge 2x6 20 Concierge 2x6™ FEATURES Switch Core »» 6 Phone line jacks The Heart of the System. »» 2 Hybrid Connections The new Concierge™ 2x6 switch core routes six incoming analog phone lines to JK Audio innkeeper 1rx™ or innkeeper 2™ Digital Hybrids. Concierge adds music on hold input, auxiliary phone integration, and intuitive call control. Two Concierge switch cores can be bridged together, providing six additional phones lines for a 2 hybrid, 12 line system. »» Hold Audio Input »» Expandable to 2 x 12 Lines TALK SHOW SYSTEM »» LED Line Status Indicators »» Front Panel DIP switches 2nd CONCIERGE GUEST MODULE INNKEEPER INNKEEPER SPECIFICATIONS GM GM1x6, GM2x6, GM1x12 Size: Weight: C Phone Lines 9.5” x 3.5” x 1.2” ( 24 x 9 x 3 cm ) Connector: 1.25 lbs ( 0.5 kg ) GM1x6r, GM2x6r, GM1x12r Size: Weight: 19” x 3.5” x 1.2” ( 48 x 9 x 3 cm ) 1500 VAC Ringer: 0.5B REN Input 1.75 lbs ( 0.8 kg ) GM: Guest Modules, C: Concierge 2x6 RJ11C Isolation: 1/8" (3.5mm) Mono: 20k ohms / -10 dBu nom USB Connector: Standard: Power: Size: Weight: Type B 2.0 120-240 VAC 1.75” x 7.3” x 19” ( 4.5 x 18.6 x 48.3 cm ) 5.4 lbs ( 2.4 kg ) Next: Field Interview Tools >> 21 MIC CODEC 00:00:00 OR L R PLAY/REC MENU FEATURES »» HD Voice (Wide-Band Speech) FIELD INTERVIEW BP • • Field Interview Tool • A Little One On One. »» Bluetooth Wireless Technology »» 4-conductor 3.5mm Headset Interface • »» Headphone, Mic, and Line Input Level Controls • • RemoteMix One™ performs live man-on-the-street interviews through your cell phone and can provide two-way IFB connections through a cell phone or notebook for truly flexible remote monitoring. »» XLR Mic Input • • Wireless Phones and Notebooks: »» Mic Mute Switch • »» 3.5mm Stereo Line Input • • »» 3.5mm Stereo Line Output • • »» ¼" Stereo Headphone Jack • • »» >10 Hours on one 9V Alkaline Battery »» >20 Hours on one 9V Alkaline Battery • • R1: RemoteMix One, BP: BluePack 22 RemoteMix One™ R1 JK Audio Connect to cell phones and notebooks through the wired headset jack. A 3.5 mm stereo line input jack allows recordings to be mixed into the broadcast. The 3.5 mm stereo line output jack provides your full bandwidth microphone signal on the left channel and the return audio on the right channel. Use as a headset replacement for normal voice calls, or transmit full bandwidth audio using third party CODEC apps. Interchangable interface cables connect to most phones and notebooks. To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 MIC CODEC BluePack™ BluePack pairs to your cell phone like a Bluetooth wireless headset. BluePack also pairs to Bluetooth equipped sound cards and music players in full bandwidth stereo A2DP mode. A 3.5 mm stereo line input jack allows recordings to be mixed into the broadcast. PLAY/REC MENU Input Female XLR: 1/8" (3.5mm) Stereo: 20 k ohms / -10 dBu nom. Output 1/8" (3.5mm) Stereo: 1/4" Stereo Headphone: Power: Size: Weight: 100 ohms / -10 dBu nom. 8 ohms, ½ watt per channel 9 VDC Battery 4.7” x 3.75” x 1.65” (12 x 9.5 x 4.2 cm)) 10 oz (275 g) BP Bluetooth Wireless Technology Standard: 3.0 Distance: 66 ft (20 m) Frequency Response: The 3.5 mm stereo line output jack provides your full bandwidth microphone signal on the left channel and Bluetooth audio on the right channel. Like any phone call, live interviews are limited to 3.4 kHz (or 7 kHz*) voice bandwidth back to the station. However, this output allows you to make a full bandwidth recording to bring back to the station or send over the web. 2k ohms / -34 dBu nom. FIELD INTERVIEW Wireless Phones and Notebooks: R1 + BP of your cables has gone rogue, it's time for field reporting that is a little more portable. Don't get wrapped up in unnecessary cables. BluePack allows live man-on-the-street interviews through a cell phone equipped with Bluetooth Wireless Technology. L R SPECIFICATIONS Wireless Interview Tool When it Gets Down to the Wire. And one 00:00:00 OR Hands-Free (Full Duplex): 300 Hz– 3.4 kHz Hands-Free (Full Duplex HD): 50 Hz– 7 kHz A2DP (Master » Headset): 30 Hz– 17 kHz R1: RemoteMix One, BP: BluePack Use a Wireless Mic with your Camera or Tablet. BluePack along with a professional video camera app, lets you record broadcast worthy interviews while placing the mic in the subjects hand for improved audio quality. On camera reporter can monitor audio levels in real-time. *The voice bandwidth is extended to 7 kHz on an HD-to-HD phone call. Next: Remote Broadcasting >> 23 ComPack™ Universal Telephone Audio Interface Remotely Anywhere. Pick up this new handheld road tool to get audio in and out of analog phone lines, PBX systems, even cell phones. Perfect for Remote Broadcasts, IFB feeds, or interviews over any phone connection. OR OR Wireless Phones and Notebooks. Simply 1 2 plug ComPack into the 3.5 mm headset jack of your wireless phone or notebook computer. Your cell phone will recognize ComPack as a headset which will disable the internal mic and speaker. 3 4 5 6 7 8 9 * 0 # PBX Systems. Unplug the handset from any analog or digital PBX phone and plug the coily cord into ComPack. You can now send and receive audio through the PBX telephone set. FIELD INTERVIEW Analog Phones. Plug ComPack into an RJ-11 jack, go off-hook and dial, or answer an incoming call. OR OR Add a Phone Line to the Party Line. ComPack INTERCOM FEATURES »» HD Voice Compatible (Wide-Band Speech) also functions as a simple telecom interface for your beltpack intercom system. This no-frills feature allows you to connect the 3 pin male XLR to your wet party line. This provides a full duplex, always-on connection to any telephone network. »» Works with Analog and Digital PBX or VoIP Phones »» 4-conductor 3.5mm Headset Interface »» Headphone, Mic, and Line Input Level Controls SPECIFICATIONS Input »» XLR Mic Input *(Mic/Line Switch) Female XLR: »» XLR Line Output *(Switches to Com Link) 1/8" (3.5mm) Stereo: Male XLR: »» ¼" Stereo Headphone Jack 1/4" Stereo Headphone: »» Transmit Clip LED Phone Line: »» Battery Test LED »» DTMF Keypad and Lockout Switch »» Handset Selector Switch 20 k ohms / 250 mV RMS; -10 dBu nom. To find a Dealer, visit jkaudio.com 8 ohms, 1/2 watt RJ11C 1500 VAC Ringer LED: 0.9B REN Keypad: Size: »» >20 Hours on one 9V Alkaline Battery 600 ohms / 45 mV RMS; -25 dBu nom. Isolation: Power: (Electret, Carbon, Dynamic) JK Audio Mic/Line Pad Switch = +6 dBu max Output »» 3.5mm Stereo Line Input 24 1k ohms / 15 mV RMS; -34 dBu nom.; Weight: DTMF 9 volt battery AC power supply 120-240 VAC (included) 8" x 3" x 2.2" (20.3 x 7.6 x 5.6cm) 1.5 lbs (680 g) call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 RemoteMix 2™ FEATURES Broadcast Field Mixer »» HD Voice Compatible (Wide-Band Speech) a two-channel field mixer / headphone amplifier that’s a little more hands-on in the remote broadcast environment. We’ve tightened the belt on this one. It may be smaller but we didn’t skimp out on the good stuff. RemoteMix 2 provides a communications interface for remote broadcast, IFB, or a backup audio path. The integrated headphone amplifier provides sidetone to monitor all inputs as well as an external feed. RemoteMix 2 features a phone line hybrid with keypad along with a wired notebook/cell phone headset interface. These parts were designed to work together, saving setup time and wiring in the field. TV - Use a Phone Line or Wireless Phone for Real Time Production Monitoring. RemoteMix 2 Combines a small front-end mixer with two powerful ¼” headphone outputs. Send and receive interview audio while pulling IFB off the phone line, cell phone or notebook. Radio - Perfect for live remotes. Use it as a front-end mixer for your POTS, VoIP or smart phone codec. Or, use it as a phone line hybrid, calling in to your studio talk show hybrid. »» Two XLR Mic Jacks »» Mic/Line Pad on Channel 2 »» Two ¼” Headphone Jacks with Individual Level Controls »» 3.5 mm Send and Receive Jacks »» LED VU Meter »» Phone Line Hybrid with DTMF Keypad »» 4-conductor 3.5mm Headset Interface »» Dual 9 Volt Batteries »» 100-240 VAC External AC Power Supply SPECIFICATIONS Input Female XLR Mics: MIC L R PLAY/REC MENU OR 20k ohms / -10 dBu nom 20k ohms / -10 dBu nom Output 1/8” (3.5mm) Stereo: Headphone 1/4” Stereo: CODEC OR 100 ohms / -10 dBu nom 8 ohms / 1/3 watt per channel RJ11C 0.5B REN Isolation: 3750 VAC Size: CUE +16 dBu max, 20Hz - 20kHz, +/- 1dB Ringer: Power: CODEC (Mic/Line pad switch = +6 dBu max) Headphone Cue 1/4”: Phone Line Connector: OR 2k ohms / -25 dBu nom 1/8” (3.5mm) Stereo Line: Balanced Male XLR: 00:00:00 REMOTE BROADCASTING The Handy, Compact Mixer. RemoteMix 2 is Weight: 100-240 VAC, 50-60Hz or Two 9 VDC batteries 7.75” x 6.5” x 2.3” 2.1 lbs (960 g) IP Next: More Field Mixers >> 25 RemoteMix 3.5™ Broadcast Field Mixer FEATURES REMOTE BROADCASTING 3.5 4 »» HD Voice (Wide-Band Speech) • • »» XLR Mic Jacks 3 4 »» Switchable 48 volt phantom power for each mic input These are universal communications interfaces. RemoteMix 3.5 and RemoteMix 4 feature a phone line hybrid and keypad, a PBX handset interface, and both wired and wireless cell phone interfaces. Radio. Perfect for sports remotes. These field mixers can be used as a phone line hybrid, calling into your studio talk show hybrid, or as a front-end mixer for your POTS, VoIP, or smart phone codec. • »» Mic/Line pad on channels 3 & 4* • • »» ¼” Headphone Jacks with Individual Level Controls 3 4 TV. RemoteMix 3.5 and RemoteMix 4 give you the »» Individual Headphone Source Selector ultimate phone connectivity with multiple ¼” IFB headphone feeds. Send and receive interview audio and pull IFB out of any business phone system, even your cell phone or notebook. • »» 3.5 mm Send and Receive Jacks • • »» LED VU Meter • • »» Phone Line Hybrid with DTMF Keypad with Redial • • »» Universal PBX Handset Interface • • »» 4-conductor 3.5mm Headset Interface • • »» Bluetooth Wireless Technology More than just a field mixer. • »» Bass Boost MIC 00:00:00 L R D PLAY/REC OR MENU • • »» Hot Swappable Dual 9V Batteries and 120-240 VAC External Power Supply • • E * RemoteMix 3.5 only has a Mic/Line pad on Channel 3. B A C OR CODEC IP 1 2 3 4 5 6 7 8 9 * 0 # CUE OR CODEC 26 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 RemoteMix 4™ Broadcast Field Mixer Power Smart Design. Low noise, low power ICs are used throughout either of these mixers to preserve battery life. The low noise 100-240 VAC desktop style power supply (included) overrides the battery power only when the supply is actually providing power. If the power goes out, the batteries automatically cut in. The phantom power generator in the RemoteMix 4 only runs if any of the rear panel 48 V switches are set to “ON”. SPECIFICATIONS Input Female XLR Mics: OR MIC L R 20k ohms / -10 dBu nom Headphone Cue 1/4”: 20k ohms / -10 dBu nom Output Balanced Male XLR: 1/8” (3.5mm) Stereo: Headphone 1/4” Stereo: MENU +16 dBu max, 20 Hz - 20 kHz, +/- 1dB 100 ohms / -10 dBu nom 8 ohms / 1/3 watt per channel Bluetooth Wireless Technology Standard: Frequency Response: Distance: Phone Line Connector: 3.0 Hands-Free (Full Duplex): 300 Hz– 3.4 kHz Hands-Free (Full Duplex HD): 50 Hz– 7 kHz A2DP (Master » Headset): 30 Hz– 17 kHz 33 ft (10 m) RJ11C RJ22 Ringer: 0.5B REN Isolation: 1500 VAC Power: PLAY/REC D (Mic/Line pad switch = +6 dBu max) 1/8” (3.5mm) Stereo Line: PBX Interface: 00:00:00 2k ohms / -25 dBu nom Size: Weight: REMOTE BROADCASTING Great Sound. In our remote field mixers, a soft limiter prevents overdriving the phone line interfaces, while the mixer's XLR output is pre-limiter (full range). Convenient 3.5 mm send and receive jacks for recording the show, or mixing in your MP3 player. Exclusive to the RemoteMix 4, Bass Boost adds some low end before sending the signal down the phone line. 100-240 VAC, 50-60Hz or Two 9 VDC batteries 9.5” x 8” x 3” 3.8 lbs (1.72 kg) Talk About Backup... Five ways to get the signal back to the station. E B A A. Dial in with the internal phone line hybrid, B. Connect through any PBX or VoIP telephone through the C Universal Handset Interface, OR CODEC IP 1 4 2 5 3 6 7 8 9 * 0 # CUE OR C. Plug into the headset jack of your phone or notebook, D. Pair to any Bluetooth audio device E. Use as a front end mixer for your CODEC. CODEC Next: More Field Mixers >> 27 RemoteMix x4™ 4 Channel Field Mixer Mix It Up. RMx4 combines a four-channel field FEATURES »» Four Low Noise, High Headroom, XLR mic inputs (Mic/Line Switches on Channels 3 & 4) FIELD MIXERS »» Individually Switchable 48v Phantom Power »» 120 Hz Low Cut Filter mixer with a four-channel headphone amplifier. A soft limiter prevents overdriving the full-duplex headset interface, while the master XLR and 3.5 mm outputs are pre-limiter (full range). Line level cue input to the headphones make RMx4 a perfect companion to your codec or recorder. »» Four ¼” Headphone Jacks with Individual Source Selector and Level Controls Convenient. 3.5 mm send and receive jacks for recording or playing back recorded material. Separate headphone level and source selection controls for each headphone output. Monitor just the clean mixer output, or the Cue input plus the mix. »» ¼” Headphone Cue Input Power Smart Design. Switchable 48V Phantom »» Master XLR Output 20 Hz – 20 kHz Power on each mic input. Powered by 1 or 2 hotswappable 9V batteries that automatically kick in if AC power goes down. Low noise, low power ICs are used throughout to preserve battery life. The 100-240 VAC desktop style power supply (included) overrides the battery power only when the supply is actually providing power. »» Phone Headset Interface with 3.5 mm TRRS plug »» 3.5 mm Stereo Line Input »» 3.5 mm Send and Receive Jacks »» LED VU Meter »» Hot Swappable Dual 9V Batteries and 120-240 VAC External Power Supply SPECIFICATIONS Input Female XLR Mics (4): MIC 00:00:00 L R OR PLAY/REC MENU Phantom Power: 2k ohms / -25 dBu nom Channel 3 & 4 have -40 dB Mic/Line pad switch Line = 50k ohms / +20 dBu max 48 VDC with 6.8k ohm supply resistance 1/8” (3.5mm) Stereo Line: 20k ohms / -10 dBu nom 1/4” Headphone Cue: 20k ohms / -10 dBu nom Output Balanced Male XLR: 1/8” (3.5mm) Stereo: CODEC Headphone 1/4” Stereo: CUE CODEC Power: OR Size: Weight: 28 JK Audio To find a Dealer, visit jkaudio.com 50 ohms / +16 dBu max 20 Hz - 20 kHz +/- 1dB 0.04% THD @ +16 dBu 100 ohms / -10 dBu nom 8 ohms / 1/3 watt per channel 100-240 VAC, 50-60Hz or Two 9 VDC batteries 9.5” x 8” x 3” 3.6 lbs (1.6 kg) call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 RemoteAmp™ Mono Headphone/Earpiece Amplifier Cuts through the Crowd Noise. The RemoteAmp clips to your belt and accepts a 3-pin XLR audio input from a mixer. You’ll like the convenient features, such as the separate power switch, which allows you to leave the volume control set at a comfortable level. RemoteAmp Two™ Stereo Headphone Amplifier Mono IFB Plus Stereo Audio Input. RemoteAmp Two provides a listen only connection for mono IFB or full bandwidth stereo music listening. Separate volume controls for the XLR and 3.5 mm line input jacks allow a simple mix of mono and stereo sources. The XLR line level input accepts either a balanced mono signal, or a party line intercom feed (listen-only). The ½ watt, ¼” stereo headphone jack will cut through any crowd noise. FEATURES RA »» Compatible with Party-Line Intercoms SPECIFICATIONS RA Input R2 • »» XLR Line level Input • • »» XLR Line In Volume Control • • 4k ohms / 100 mV RMS; -18 dBu nom.; +12 dBu max; 46 dB maximum gain »» 3.5 mm Stereo Line Input Jack • »» 3.5 mm Line In Volume Control • 1/4" Stereo Headphone: 8 ohms, 1 Watt max »» 1/4" Stereo Headphone Jack • • 3.5 mm Mono Earpiece: 150 ohms, 100 mW nom. »» 3.5 mm Earpiece Jack • • »» Stainless steel belt clip • • »» >20 Hours on one 9V Battery • • Female XLR: Output Size: Weight: 5.1 x 2.7 x 1.3 inch (13 x 6.9 x 3.3 cm) 10 oz. (275 g) Input R2 Female XLR: 3.5 mm Stereo: LISTEN-ONLY IFB The RemoteAmp is a simple battery-powered personal headphone amplifier. Use the RemoteAmp as an IFB earpiece or headphone amplifier. This low-distortion, 1 watt amplifier will cut through the crowd noise without distortion. 20k ohms / 0 dBu nom. 20k ohms / -10 dBu nom. Output 1/4" Stereo Headphone: 8 ohms, ½ watt per channel 3.5 mm Mono Earpiece: 100 ohms, 40 mW Frequency Response: Power: Size: Weight: 20 Hz – 20 kHz One 9 volt Alkaline Battery 4.7” x 3.75” x 1.65” (12 x 9.5 x 4.2 cm) 10 oz. (275 g) OR INTERCOM RA: RemoteAmp, R2: RemoteAmp Two Extend your Intercom | Next: Wireless Party-Line Solutions >> 29 FEATURES BlueSet™ Wireless Headset Interface »» HD Voice (Wide-Band Speech) Communications Unleashed. »» Electret / Dynamic Headset Compatibility INTERCOM INTERFACES These headset interfaces plug directly into most Party-Line (PL) belt packs, replacing the wired headset. A 3.5 mm stereo headset jack contains a mic level output signal suitable for recording, with the beltpack headphone signal on the left channel, and the Bluetooth return signal on the right. A switch selects between connection to a 3rd party Bluetooth headset or a cell phone. Headset Connect: Leave your belt pack on the desk as you walk around the room. Some Bluetooth headsets allow you to switch between two phones, or in this case, switch between your intercom and your cell phone. »» 3.5 mm Mic Level Output »» Mini USB Power Jack »» >6 hours on Internal Li-Ion Battery »» Trim Pot adjusts Bluetooth Return SPECIFICATIONS Output 1/8” (3.5mm) Stereo: 1000 ohms / 15 mv RMS; -34 dBu nom. Bluetooth Wireless Technology Phone Connect: Pair BlueSet to your cell phone to grant remote access to the Party-Line for a distant member. The belt pack Mic/Talk button controls audio from the cell phone into the intercom system. Intercom Headset Compatibility: Female and Male XLR four and five pin versions available: BlueSet-F5, BlueSet-M5, BlueSet-F4, BlueSet-M4. Standard: 3.0 Distance: 66 ft (20 m) Frequency Response: Hands-Free (Full Duplex): 300 Hz– 3.4 kHz Hands-Free (Full Duplex HD): 50 Hz– 7 kHz Battery: Internal Lithium-Ion Polymer Rechargeable Power: Connector: Size: Weight: 120-240 VAC Power Supply, 5V DC, 50 ma Mini-USB Series B 1.1” x 4.4” (2.8 cm x 11.2 cm) 2.1 oz (60 g) OR 30 JK Audio To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 WIRELESS INTERCOM SOLUTIONS EXTENDED RANGE INTERCOM INTERFACES ADD A WIRELESS HEADSET Leave your beltpack behind. BlueSet plugs into the headset jack of your existing belt pack. Interloop connects to the existing Party Line intercom system like any other belt pack. Pair either of these with a BSET-HS1 oryour exisiting wireless headset for an extended range of mobility, unrestricted by the cables. BlueSet™ Interloop™ page 30 page 32 BlueSet™ Interloop™ page 30 page 32 CONNECT TO A MOBILE PHONE BlueSet and Interloop connect to a wireless phone allowing remote access or a backup telecom connection. CONNECT TO A VOIP, POTS OR MOBILE PHONE LINE Interchange is the missing link between your Party Line intercom and the telecom world. Connect Interchange to a JK Audio AutoHybrid IP2 for VoIP access. Connect Interchange to a JK Audio innkeeper LTD, innkeeper 1rx, or innkeeper 2 Digital Hybrid for POTS lines. Use the headset interface with your mobile phone when POTS and VoIP are not an option. Interchange™ page 34 INTERCOM INTERFACES INTERCOM-TELECOM LINK Interchange LTD™ page 35 BRING A BELTPACK AND HEADSET WITH YOU FOR... INTERCOM ACCESS ANYWHERE Outerloop is your beltpack for the other side of the telecom link. Connect your favorite wired intercom headset to Outerloop to use your headset anywhere. Pair Outerloop with BlueSet or Interloop, or pair to your mobile phone to call into an Interchange Intercom Phone Bridge. Outerloop™ page 33 Extend your Intercom | Next: More Wireless Party-Line Solutions >> 31 INTERCOM OR FEATURES INTERCOM INTERFACES IL OL »» HD Voice (Wide-Band Speech) • • »» 3-pin XLR Male and Female Intercom Jacks • »» Connects to Bluetooth Headsets, Phones, & Notebooks • • • »» 4-Pin and 5-Pin Male or Female Headset Jacks • »» Send and Receive Volume Controls • • »» PTT Button • • »» Intercom Powered with 9 Volt Battery Backup • • IL: Interloop, OL: Outerloop 32 JK Audio Intercom-to-Wireless Bridge Stay in the Loop. »» Uses Standard Intercom Headsets »» > 10 hours On One 9 Volt Battery Backup Interloop™ Interloop works with industry standard Two-Wire, Party-Line intercoms, connecting to the existing intercom system like any other belt pack. Utilizing Bluetooth Wireless Technology, a rear panel switch selects Headset or Phone connection. Headset mode allows you to connect to a Bluetooth enabled headset for wireless freedom. Phone mode allows you to connect to a wireless phone to let others join in, or connect to a notebook or laptop to provide remote voice access using VoIP applications such as Skype™. Battery Backup. Powered by the intercom system, yet uses less current than a typical belt pack. Includes 9 VDC battery backup, holding the wireless connection while changing cables. Increased Range. While Interloop will work with any Bluetooth enabled headset, most headsets were designed to work a short distance from the phone. JK Audio Outerloop and BlueSet offer increased range and performance making it the perfect match. To find a Dealer, visit jkaudio.com call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 OUTERLOOP-M OR Outerloop™ SPECIFICATIONS IL XLR Intercom Channel Output Level: In the Loop, Out of Bounds. Outerloop functions as a wireless link to your intercom system. This universal belt pack provides connections for your existing 4-pin or 5-pin intercom headset, routing audio through your mobile device over a Bluetooth wireless connection. Use your mobile device to call into your intercom phone bridge, station phone coupler, or any phone-based intercom app such as Unity Intercom or Clear-Com® Agent-IC. Terminating Impedance: Bridging Impedance: Outerloop also features a switch that selects between pairing to a phone or to a headset. In Phone mode, Outerloop pairs to your cell phone or computer just like any other Bluetooth headset. In Headset mode, you can pair to another Outerloop or to a standard Bluetooth headset, providing a short-range secure wireless point-to-point intercom. Outerloop-to-Outerloop connections default to HD Voice (120 Hz to 7 kHz) bandwidth. Outerloop also offers increased range and performance with JK Audio Interloop and BlueSet. Many new Bluetooth wireless cell phones and headsets also provide HD Voice bandwidth. 200 ohms >15k ohms Pin 1: Common Pin 2: +30 VDC ( +12 VDC min ) 35 mA Pin 3: Audio OL Model Outerloop-F Headset: 4-pin Female XLR, 5-pin Female XLR Model Outerloop-M Universality. Adapting Headset: 4-pin Male XLR, 5-pin Male XLR Headset Microphone Impedance: 50-2000 ohms Headset Earpiece Load Impedance: Power: IL + OL to the mixed-up intercom world, model OTL-F features both 4-pin and 5-pin Female XLR headset jacks, while model OTL-M features both 4-pin and 5-pin Male XLR headset jacks. Easyto-use send and receive level controls, a push-on, push-off Talk button, as well as a recessed sidetone level control. All the comforts of a standard belt pack whether you are around the corner or around the world. 0 dBu ( 775 mV ) nominal INTERCOM INTERFACES Universal Intercom Belt Pack OR 50-600 ohms >50 mW into 150 ohms Bluetooth Standard: Profile: Distance: Frequency Response: Power: Size: Weight: 3.0 Hands Free (HF) 66 ft (20 m) Hands-Free (Full Duplex): 300 Hz– 3.4 kHz Hands-Free (Full Duplex HD): 50 Hz– 7 kHz IL: Intercom System & 9 VDC Battery Backup OL: 9 VDC Battery 4.7” x 3.75” x 1.65”(12 x 9.5 x 4.2 cm) 10 oz ( 275 g ) IL: Interloop, OL: Outerloop Next: Intercom Interfaces >> 33 Interchange™ FEATURES Intercom Phone Bridge »» HD Voice (Wide-Band Speech) Compatible The Missing Link. »» Male and Female 3 pin XLR Intercom Loop Jacks INTERCOM INTERFACES Interchange allows remote access to your party-line intercom through JK Audio Innkeeper Series Digital Hybrids. This professional half rack interface provides a four wire audio interface and remote control connection for JK Audio innkeeper LTD, innkeeper 1rx, or innkeeper 2 Digital Hybrids for POTS lines or JK Audio AutoHybrid IP2 for VoIP lines. The front panel headset interface jack allows easy connection of your cell phone, tablet, or computer allowing remote access through a wireless phone or conferencing app. Interchange contains a sophisticated intercom hybrid in a low noise pro audio design. The Listen-Always design allows both the phone hybrid / 4-wire connection and the cell phone headset interface to monitor the intercom just like any other belt pack. Listen mode is a high impedance bridging tap on the intercom line. Talk mode is enabled via a front panel switch, either Off, On, or Auto. Auto follows the phone hybrid AutoAnswer mode. Talk mode uses a solid state relay to properly couple Talk audio from the phone line and cell phone interfaces, to the intercom channel. The Innkeeper 2 conference feature allows two callers to share one intercom connection. Alternatively, the included cables allow Line 1 and Line 2 of the Innkeeper 2 to be connected to two separate Interchange™ units, allowing connection to separate intercom loops. »» Male and Female 3 pin XLR 4-wire Jacks »» Male XLR Mix Line Out for Monitoring »» Send and Receive LED Metering »» Front Panel Screwdriver Level Controls »» Front Panel Channel Select »» Front Panel Cell Phone Interface »» Listen Always, Talk when Talk-Enabled »» Intercom and Phone Hybrid Powered »» Optional RA2 Rack Mount Adapter SPECIFICATIONS XLR Intercom Channel Output Level: Terminating Impedance: Bridging Impedance: -10 dBu ( 250 mV ) nominal 200 ohms >15k ohms Pin 1: Common Pin 2: Audio + 30 VDC ( +12 VDC min ) 50 mA Pin 3: Audio Headset Interface Connection: Frequency Response: 3.5 mm TRRS 50 Hz - 7 kHz (HD Voice) Input Balanced Female XLR: Frequency Response: 20k ohms / 500 mV RMS (-4 dBu nom) +12 dBu max 50 Hz - 20 kHz Output Balanced Male XLR: Frequency Response: INTERCOM HYBRID Power: Size: Weight: 34 JK Audio To find a Dealer, visit jkaudio.com 200 ohms / 500 mV RMS (-4 dBu nom) +12 dBu max 50 Hz - 20 kHz Intercom Powered +30 VDC (+12 VDC minimum) 50 mA 7.6” x 5.3” x 1.5” (20 x 14 x 4 cm) 1.2 lbs (0.5 kg) call 1-800-JK-Audio 800.552.8346 +1.815.786.2929 FEATURES Intercom Phone Bridge + Digital Hybrid »» Male and Female 3 Pin XLR Intercom Loop Jacks Turn Your Phone Line Into a Party-Line. »» Male XLR Mix Line Out for Monitoring Interchange LTD allows remote access to your party-line intercom system. This 1RU rackmount interface includes a digital hybrid for connection to analog (POTS) phone lines. The front panel headset interface jack allows easy connection to your wireless phone, tablet, or computer allowing remote access through a phone call or conferencing app. The front panel DTMF keypad and 3.5 mm TRRS headset jack allow easy call setup. The internal digital hybrid connects intercom audio to a standard analog telephone line without the transmit/receive crosstalk common to analog hybrids. Its DSP continuously monitors both the phone line and audio signals to deliver excellent separation. This proprietary, dual-convergence echo canceller algorithm can achieve excellent separation, typically exceeding 50 dB, without any setup and without sending a noise burst down the line. »» Send and Receive LED Metering »» Front Panel Screwdriver Level Controls »» Front Panel Channel Select »» Front Panel Cell Phone Interface »» Front Panel TRRS Monitor Headset Jack with Volume Control »» Listen Always, Talk when Talk-Enabled »» Enable/Disable Auto-Answer »» 16-bit DSP Technology INTERCOM INTERFACES Interchange LTD™ »» Front Panel Off-Hook LED »» Send and Caller Signal Level LEDs INTERCOM SPECIFICATIONS Intercom Channel Connection: Output Level: Terminating Impedance: Bridging Impedance: Pin 1: Output Male & Female 3-pin XLR -10 dBu (250 mV RMS) nominal 200 ohms >15k ohms Common Pin 2: Audio + 30 VDC ( +12 VDC min ) 50 mA Pin 3: Audio Frequency Response: 3.5 mm TRRS Wireless Interface 50 Hz - 7 kHz (HD Voice) 200 ohms / 500 mV RMS (-4 dBu nom) +12 dBu max Misc. Ringer: 0.8B REN Isolation: 1500 VAC Frequency Response: Monitor Headset Jack: Power: Headset Interface Connection: Balanced Male XLR: Size: Weight: Telephone Side 200 Hz - 3600 Hz 3.5 mm TRRS 120-240 VAC Power Supply (included) 19” x 5.4” x 1.75” 5.2 lbs 35 JK Audio 1311 E 6th Street Sandwich, IL 60548 USA Turn your Phone Line Into a Party-Line. Intercom Phone Bridge + Digital Hybrid. Interchange LTD allows remote access to your party-line intercom system. This 1RU rackmount interface includes a digital hybrid for connection to analog (POTS) phone lines. The front panel headset interface jack allows easy connection to your wireless phone, tablet, or computer allowing remote access through a phone call or conferencing app. Listen-Always Design. The Listen-Always design allows both the phone hybrid and the mobile phone headset interface to monitor the intercom just like any other belt pack. Digital Hybrid. The internal digital hybrid connects intercom audio to a standard analog telephone line without the transmit/receive crosstalk common to analog hybrids. Interchange LTD™ See Page 35 © 2017 JK Audio, Inc. Printed in the USA 5/17 1-800-JK-Audio 1-800-552-8346 • 1-815-786-2929 Se Habla Español jkaudio.com [email protected]