Catalogue - федеральный информационный фонд

Transcript

Catalogue Professional Sound Products Commercial Sound Products P.A. Amplifier -—• Rack Type —• Table Amplifier & Others —• Audio Mixer • Music Amplifier » Column Speaker —• Rack Cabinet £яй> JEDIA CO., LTD. POWtn Table Amplifier & Others P.A Amplifier Rack Type Music Amplifier "8 Audio Mixer Speaker & Others I le Amplifier & Professional Equipments Speaker & Others v CONTENTS 1. Table Amplifier & Others 2. P.A Amplifier 3. Rack Type 4. Professional Equipments 5. Speaker & Ohters с з •о 2 о. •a с 3 "is 'О ь. 01 £ Е 3 е 3 1 о. •о с 1 о Table Amplifier & Others JPA-1120A/1240A ATT Zone Amplifier Pack Series JTP-10 FM/AM Tuner JCP-10 Cassette Deck JCR-10 Cassette Receiver JDM-10A ,*«.*'* Digital Message JCDP-10A CD Player JCDR-10A CD & Receiver FEATURES • Optional module slot (JCR-10, JTP-10, JCP-10, JDM-10A, JCDP-10A, JCDR-10A). • Individual EQ per input. • Input gain control (microphone-line inputs 1-3). • Phantom power switch inputs. • Input 1 by Combo/Din-7 (PTT 10). • Input 2-3 by Combo (mic-line). • Input 4-5 by RCA line. • Pre-amp out / amp-in for extensions with power amplifiers. • Recording output RCA. • Telephone paging and night ringer. • Priority-switch on Mic 1, 2 & 3. SPECIFICATIONS • TECHNICAL 6 GENERAL Input Sensitivity/Impedance I I I MIC/LINE1~3 -50dBu(2.45mV) 5KQ BAL, -10dBu(245mV) 5KQ BAL LINE 4 - 5 -10dBu(245mV) 15KQ UNBAL TEL PAGING -10dBu(245mV)5KQBAL PACK UNIT -10dBu(245mV) 10KQ UNBAL REC OUT 0dBu(775mV) 3KQ UNBAL 0dBu(775mV) 100Q UNBAL PRE OUT AMPIN 0dBu(775mV) 10KQ UNBAL Rated Output JPA-1120A:120W(RMS), JPA-1240A:240W(RMS) LOW IMP: 4Q Output Impedance EUROPE : 100V, 70V, 50V, 25V, 12.5V, 8.9V ATT. Step(option) AMERICA : 70V, 50V, 25V, 12.5V, 8.9V, 6V LESS THAN -3dB(55Hz ~ 16kHz) Frequency Responsefline signal) Signal to Noise Ratio LINE : MORE THAN 80dB("A" WEIGHT) MIC : MORE THAN 70dB("A" WEIGHT) T.H.D LESS THAN 1%(1 kHz) JPA-1120A:350W, Power Consumption JPA-1240A:630W JPA-1120A: 1.6A/0.8A 1/8 Power Current Draw 120 V/230V JPA-1240A:2.8A/1.4A JPA-1120A:2.4A/1.2A, 1/3 Power Current Draw 120 V/230V JPA-1240A:4A/2A Rated Power Current Draw 120V/230V JPA-1120A:3.6A/1.8A JPA-1240A:6.4A/3.2A Power(option) 120V/230V/240VAC 50/60HZ, 24VDC 430(W)X133(H) X 352(D) Dimensions (mm) 16.9(W)X 5.2(H) X 13.9(D) (inch) JPA-1120A: 13/28.7, JPA-1240A : 1 4 / 3 0 . 9 Weight(kg/lbs) JDM-10AS/W JRC-11 JPTT-10 Push to talk Microphone FEATURES • Chime & priority function by P.T.T. (Push To Talk). • Unidirectional microphone to reduce feedback. • Auto chime function for use with JPA-1120A/1240A or JMA-1410. JRC-10 Remote Controller FEATURES • Microphone with 5 zone speaker selector for use w i t h JPA1120A/1240A. • Chime function. • Unidirectional microphone to reduce feedback. • Remote control for use with JDM-10A module. • Multiple use of JRC-10 with slave-priority function. • Audio, data & power through one cable (UTP-Cat5). JRC-11 Remote Controller FEATURES • Microphone with 5 zone speaker selector for use with JPA1120A/1240A. • Chime function. • Unidirectional microphone to reduce feedback. • Multiple use of JRC-11 with slave-priority function. • Audio, data & power through one cable (UTP-Cat5). Remote Output V JPTT-10 Remote Receiver JRR-10 Accessory Talk SOT r-Out Gain JRC-10 — - — JPA-1120A/1240A ATT Zone Amplifier How To Connect system (School) Play ground Horn Speaker JCO-130 Watching Room JWS-205 ooo ooo OOO OOO Tel exchanger X JPTT-10 re detection contact poii School Master ANT. Terminal JRC-10 ® _ ® D с: I ШШ - r — i — i — i — г 5 4 3 2 1 4 .it If ШШ MODEL NO.: JPA-1240A ATT. ZONE AMPLIFIER JIPIACO.,LTD. МЛ1Л IN КОН1.Л EACH ZONE / 50WJMAX) -> -AMPIN 1 <• WARNING:тоREDUCE т * и а к « FME i 0 Я E l f CTHIC SHOCK DO HOT EXPOSE T H S EQUIPMENTTOH A * OR М О В Ш И Е PRE O U T - - MIC / LINE INPUTS - * fl-^^fl "\ ©ID n i C€ , ' i Ш :*: '*; _T___L © ^ ® 4 fUSE INSIDE Ц) I. J 1 ! I REC OUTPUT LINE 5 INPUT •o с MIC/LINE(1~3) INPUT 3 о l/l 15 '0 ь. Ш Broadcasting E E о и Room v\ TJ э •о speakers о к. о. •о с э о (Л "5 с о 8 Refer t o 0 / P manual for Detailed configuration I 3 Table Amplifier & Others JPS-2400/3600/4800 Paging System FEATURES SPECIFICATIONS • Rated o u t p u t s : 2 4 0 W / 3 6 0 W / 4 8 0 W ( R M S ) o n 25V, 3 5 V , 50V, 7 0 V & 1 0 0 V . Input Sensitivity Input 1 / Impedance Input 2 - 4 : MIC: -50dBu(2.45mV) 2KQ BAL • "Voice p r i o r i t y " o n i n p u t 1 m u t e s i n p u t s 2 ~ a u x , MIC : -50dBu(2.45mV) 2KQ BAL : LINE: -10dBu(245mV) 200KQ BAL Pack Signal Input 5-7 AUX : -10dBu(245mV) 5KQ UNBAL • "Chime + M u t e " c o n t a c t o n i n p u t 2 - 4 h a s Pack Unit p r i o r i t y t o a u x i n p u t Pack Signal. • Detachable s c r e w t e r m i n a l s f o r i n p u t 2 - 4 . AMPIN: • Mic/Line s w i t c h f o r i n p u t 2 - 4 . Rated Output • P h a n t o m s w i t c h o n i n p u t 1-4. in f o r e x t e n s i o n s w i t h 0dBu(775mV) 10KQ UNBAL JPS-2400:240W(RMS) JPS-3600:360W(RMS) JPS-4800:480W(RMS) • Mic input surge-protection. •Pre out/Amp -10dBu(245mV) 10KQ UNBAL PRE OUT : 0dBu(775mV) 100Q UNBAL Direct OUTPUT other *»* amplifiers. • RCA cinch f o r i n p u t 5-7 (aux selector). • Slot f o r i n p u t m o d u l e s JCR-10, J T P - 1 0 , JCP-10, T.H.D • Variable speed f a n . Tone Control 3 4 5 70V 50V 35V 25V AMERICA OFF 70V 50V 35V 25V 18V LINE : LESS T H A N 8 0 d B ( " A ' W e i g h t e d ) B a s s : ± 1 0 d B a t 100Hz Treble: Power consumption • Short c i r c u i t p r o t e c t i o n . i 1 0 d B a t 10kHz JPS-3600 : 1 1 5 0 W JPS-2400:740W JPS-4800:1480W 1/8 Power Current JPS-2400:2.8A/1.4A draw120V/230V JPS-4800:5.6A/3.2A 1/3 Power Current JPS-2400: 4 A / 2 A draw120V/230V JPS-4800:8.5A/4.7A Rated Power Current JPS-2400:6.4A/3.2A d r a w 120V/230V JPS-4800 :14.0A/7.5A JPS-3600:4.4A/2.5A JPS-3600:6.7A8.8A JPS-3600:11.0A/6.0A Power Source(Option) 120V/230V/240VAC Dimensions(mm) 4 3 0 ( W ) X 133(H) X 3 5 2 ( D ) (inch) I 2 100V LESS T H A N 0 . 5 % (1kHz) • Over c u r r e n t p r o t e c t i o n . 3 •o 1 OFF MIC : LESS T H A N 7 0 d B ( " A ' W e i g h t e d ) • C o n n e c t i o n o f p a g i n g m i c r o p h o n e (JPS-10). • AC o p e r a t i o n - DC 2 4 V o p e r a t i o n . Off EUROPE M I C : LESS T H A N - 3 d B ( 2 0 0 H z ~ 19kHz) Signaln t o Noise Ratio • 5 speaker z o n e a t t e n u a t o r . • Thermal protection. 100V or 70V Frequency Response J D M - 1 0 , JCDP-10A, JCDR-10A. • Bass-Treble t o n e c o n t r o l ( 1 0 0 H z , 10KHz). 8Q, ^ Й Н ^ Weight(kg/lbs) 5 0 / 6 0 H Z , 24VDC 1 6 . 9 ( W ) X 5.2(H) X 13.9(D) JPS-2400 : 16.5/36.4 JPS-3600:19.0/41.9 JPS-4800:20.0/44.1 ° m 'S Pack Series £ 5 i з e э о m ~n с о J6 о 1Q. JPS-10 PAGING Microphone FEATURES • Chime & priority f u n c t i o n by P.T.T. (Push T o Talk). • Unidirectional d y n a m i c m i c r o p h o n e t o reduce f e e d b a c k . • Auto chime function for use with JPS-1200/2400/3600/4800 JPS-2400/3600/4800 Paging System How To Connect system (School) R COM 8П (20.ВП} NC tt tt mm? г;ч F D P rt n ACJ230\ ~/50Hz 14i)W лтт L M AMP» о )( __ -;H.[S|5| [; i и иОi ф OQ Й иии •1BV OQ к c-SOdB I-MuM/Chh i I c-SOdB L-MuM/Ch <• I м-IOdB byawto a и з •о о MIOUI IE(2-3) INIUT •о с 3 о 1Л JCO-160 Е Е о и JTU-110B 3 •с о а speakers i 1 JCO-160 Ж Refer to O/P manual for Detailed configuration JPA-1240 Public Address Amplifier FEATURES • Universal Input Each input is equipped with a combination jack to SPECIFICATIONS Technical Input Sensitivity / Impedance M I C / LINE 1-5 : -50dBm(2.45mV) accept both XLR and 1/4" phone connectiors. -10dBm(245mV) • Four Output Zones TEL PAGING : -10dBm(245mV) Four seperate output zones can be switched on or PACK UNIT: -16dBm(245mV) off independently using the front panel controls. PREOUT:+4dBm(1.23V) • +48V DC Phantom For Inputs 1 and 2 AMPIN:+4dBm(1.23V) • Priority Assignment For Channels 1 And 2 Rated Output 240W(RMS) • Remote Chime. OUTPUT IMPEDANCE /ATT.STEP(Option) LOW IMP : 8fi, 2.6Q • External DC Input. EUROPE:100V • Two-band Main Equalizer. AMERICA: 70V Frequency Response(Line Signal) LESS THAN -3dB(80Hz ~ 15kHz) Signaln to Noise Ratio LINE : MORE THAN 70dB MIC : MORE THAN 60dB T.H.D LESS THAN 6% (1kHz) Power consumption 625W 1/8 Power Current draw 120V/230V 2.55A/1.35A Rated Power Current draw 120V/230V 6.2A/3.48A GENERAL Power Source(Option) 120V/220V/230V/240VAC 50~60Hz, 24VDC Dimensions(mm) 483(W) X I 33(H) X 350(D) (inch) Weight(kg/lbs) Pack Series tJ 3 •D JTP-10 i JCP-10 "O с 3 о 1Л I FM/AM Tuner Cassette Deck JCR-10 Cassette Receiver JDM-10A Digital Message JCDP-10A CD Player 3 1 JCDR-10A CD 6 Receiver 19(W)X 5.2(H) X 13.8(D) 13/28.6 JPA-1240 Public Address Amplifier System Connection speakers JCS-605 CHIMt 3 •о о а. •о с 3 о (Л ш Е Е о о ti 3 -а о I I & Refer to 0/P manual for Detailed configuration JPA-1060/1120 Public Address Amplifier ^ P U B U C ADDRESS « M P L W FEATURES • Versatile mixing amplifier. • Individual gain control for channel 1-5. . « . . » SPECIFICATIONS • TECHNICALS GENERAL Rated power(at 1 % THD) JPA-1120:120W(RMS) • 4 mics + 4 lines input possible. JPA-1060:60W(RMS) • Chime, 2 siren tones. Frequency response(±3dB) 80Hzto15kHz • Voice priority mute for Mic 1. THD at 1KHz(rated output) Less than 1 % • Telephone Input & Music On Hold (only tuner). Equalizer Bass: ± 1 0 d B a t 100Hz • Optional module slot (JCR-10, JTP-10, JCP-10, JDM-10A,JCDP-10A, JCDR-10A). Trible: ±10dB at 10kHz Signal to noise ratio Line : better than 70dB • Bass / treble tone control. • Pre-amp out / amp-in connection for extensions MIC : better than 60dB MIC 1-4 : 3mV Input with power amplifiers. • Remote Chime with external terminal. • Individual 3 Zone speaker selector + all zones. Power source • VU output meter. Dimensions(mm) • 100V/70V output selector. • AC operation - DC 24V operation. (inch) Weight(kg/lbs) щ_ LINE: 300mV PHONE : 2.4mV 120V/230V/240VAC 50/60Hz, 24VDC 420(W)X110(H) X 320(D) 16.5(W)X 4.34(H) X 12.6(D) JPA-1120: 1 2 / 2 6 . 4 JPA-1060: 1 0 / 2 2 Pack Series e 3 •D О 3 m и V- V E E 5 3 1 •a e 1Л "5 RMK-10A Rack Mounting Bracket (Option) JPA-1060/1120 Public Address Amplifier System Connection 3 •a с 3 о i ttl £ E о и •о о •о с 3 о 1Л CD player J6CD-10 Ж Refer to 0/P manual for Detailed configuration "Я •с о Table Amplifier & Others JCP-10/JTP-10/JCR-10 FM/AM Tuner /Cassette Deck FEATURES • • • • • Digital tuner w i t h 18 station preset memory. Auto-tuning feature. Level control. Pre-fader connection for "music on hold" -telephone. Continuous playback (auto-reverse). SPECIFICATIONS • TUNER SECTION Tuning range ANT input Usable sensitivity Signal to noise ratio • CASSETTE DESK SECTION Signal to noise ratio Wow & flutter Frequency response) ±3dB) Tape ГГ or rewinding time Tape speed • GENERAL Power Dimensions(mm) Weight(kg/lbs) JCP-10 Cassette Deck JTP-10 FM 87.5~108MHz/AM 522~1620MHz FM300Q balanced or 75 Q unbalanced AM:high impedance lead antenna FM:2/W/AM:4.5unbal, LINE:-10dB/10KQunbal 10pin connector (M1-M6, START/STOP, REPEAT/STOP, BUSY) -10dB unbal 24MW>640 MIC:300Hz~6.4kHz(fs=16kHz) LINE: 100Hz~6.4kHz(fs=16kHz) +15VDC-+17VDC 100mA operation, 80mA stand-by 16Mbits SRAM(base), Expandable up to 32Mbits(option) base 4 min 28sec in total(16Mbit) max. 8 min 56sec in total(32Mbit) max 60days(16Mbits)/max 30days(32Mbit) fs=16kHz 0"C-50°C 194(W)X 40(H) X 125(D) 7.6(W)X 1.6(H) X 4.9(D) 0.42/0.93 JCDP-10MP JCDR-10RDS CD PLAYER CD & RECEIVER JDM-10A Digital Message JCDP-10A FEATURES CD Player RECEIVER SECTION • Digital tuner with 30 station preset memory (FM:18, AM:12 stations). • Manual, seek up / down tuner. CD SECTION • Random, repeat & intro-scan play. • Cue/Review Function. • Remote control function. JCDR-10A SPECIFICATIONS Tuning range T.H.D(lkHz) Frequency response Dimensions(mm) (inch) Weight(kg/lbs) FM 87.5~108MHz / AM 531~1620MHz less than 0.02% 10Hz-20kHz(±1dB) 195(W)X40(H)X215(D) 7.7(W)X 1.6(H) X 8.5(D) (JCDP-10A)1.3kg, (JCDR-10A)1.4kg CD & Receiver Accessory JME-2A MODULE EX-CABINET FEATURES • Two module racking cabinet for modules JCR-10, JTP-10, JCP-10, JOM-10A, JCDP-10A, JCDR-10A. • XLR balanced outputs, individual or mixed for two modules. • 19" rack Stable type. • AC operation - DC 24V operation. SPECIFICATIONS • T E C H N I C A L & GENERAL Output level/impedance Frequency response Signal to noise ratio Power consumption Power Dimensions (mm) (inch) Weight(kg/lbs) pack output-Nor 0dBu(0.775V)/600ohms bal. 1+2, 1+2+3+4-Nor 0dBu(0.775V)/600ohms bal. less than -0.5dB(20Hz-20kHz). more than 68dB. 55W 120V/230V/240VAC 50/60HZ, 24VDC 483(W)X 88(H) X 350(D) 19(W)X3.5(H)X13.8(D) JME-2A : 5 / 1 1 ANT. Terminal AC Power 24VDC IN ANT. Terminal Output Pack Series JTP-10 FM/AM Tuner JCP-10 Cassette Deck Pack Series(Option) JCR-10 Cassette Receiver JDM-10A Digital Message JME-4A MODULE EX-CABINET JCDP-10A CD Player JCDR-10A CD & Receiver Pack Series(Option) э 1 o. •o FEATURES • • • • • • с Four m o d u l e r a c k i n g c a b i n e t f o r m o d u l e s JCR-10, JTP-10, JCP-10, J D M - 1 0 A , JCDP-10A, JCDR-10A. XLR balanced outputs, individual or mixed for all modules. Simultaneously use o f t w o CD m o d u l e s (JCDP-10A, JCDR-10A). 19" rack & table type. AC operation - DC 24V operation. I | E E о u <л SPECIFICATIONS • T E C H N I C A L & GENERAL Output level/impedance Frequency response Signal to noise ratio Power consumption Power Dimensions(mm) (inch) Weight(kg/lbs) AC Power ANT. Terminal С •о pack output-Nor 0dBu(0.775V)/600ohms bal. 1+2, 1+2+3+4-Nor 0dBu(0.775V)/600ohms bal. less than -0.5dB(20Hz-20kHz). more than 68dB. 55W 120V/230V/240VAC 50/60HZ , 24VDC 483(W)X 133(H) X 350(D) 19(W)X5.2(H)X 13.8(D) JME-4A:6/13.2 о •о с 3 о "75 с о 24VDC IN Output I MOBILE-35 / 60 Mixing Power Amplifier FEATURES SPECIFICATIONS • Compact and easy-to-use amplifier for both mobile and fixed installations. • High Quality balanced inputs. • Low 8- high pass filter to increase intelligibility. • Telephone input terminal with telephone night ringer. • LED level meter. • Optional module slot (JCR-10, JTP-10, JCP-10). • Over current protection. • 3 Mic, 2 Aux & 1 Tape input. • AC operation - DC 12V operation. • TECHNICAL 6 GENERAL Input sensitivity/impedance Output Output power THD at 1kHz Frequency response Signal to noise ratio Tone filter Power consumption 1/8 Power curr. draw(120V/230V AC) Max curr. draw(120V/230V AC) Power source Dimensions(mm) (inch) Weight(kg/lbs) MIC:-50dB/2KQ BAL AUX:-20dB/60K^(AUX1) BAL -20dB/15Kfl(AUX2)BAL TAPE:0dB/3K£2 UNBAL REC : -6dB / 3Kohm Unbalanced MOBILE35:lessthan10%at 35W less than 1 % at 25W "моЖЁбО : less than 10% at 60V\T less than 1 % at 40W Less than -3dB 150Hz~18kHz(at 1% THD) AUX:more than 70dB MlCmore than 60dB Low 40Hz~400Hz -6dB/oct High 2.5kHz~20kHz -6dB/oct MOBILE 35: 125W MOBILE 60 :210W MOBILE 35 :0.5A/0.25A MOBILE 60:0.8A/0.4A MOBILE 35: 1.1A/0.55A MOBILE 60: 2A/1 A 120V/230V/240V AC 50/60Hz, 12VDC 375(W)X 88(H) X 260(D) 14.76(W)X3.5(H)X10.2(D) MOBILE 35: 5.4/11.88 MOBILE 60: 6.6/14.52 MOBILE-35 / 60 Mixing Power Amplifier С з •о о k_ 0. •о с з о ю I ! Ж Refer to O/P manual for Detailed configuration 1 13 P.A. Amplifier JPA-120D/DP/DPT, 240D/DP/DPT, 360D/DP/DPT, 480D/DP/DPT 1 CHANNEL PA POWER AMPLIFIER SPECIFICATIONS FEATURES I •o с :з о in • Rated o u t p u t s : 60W/120W/240W/360W/480W(RMS). • Input l e v e l : 0 d B u ( 0 . 7 7 5 V ) 6 6 k Q b a l a n c e d . (1 P r o g r a m a n d 1 Priority Inputs) • Full p r o t e c t i o n f o r p r o d u c t reliability. - O v e r l o a d a n d speaker line s h o r t limiter circuit. - Over c u r r e n t l i m i t e r circuit. • A u t o m a t i c variable s p e e d FAN by temperature o f heatsink. • 4 0 0 H z f i l t e r t o i m p r o v e clearance o f s o u n d quality f o r matching o f resonant sound o f inner side. • 25V, 35V, 5 0 V , 7 0 V a n d 1 0 0 V O u t p u t s f o r m a c t h i n g o f speaker i m p e d a n c e ( o p t i o n a l ) . • Screw t e r m i n a l s f o r signal i n p u t t o m a k e a n easy i n s t a l l a t i o n . • Soft start circuit f o r A C p o w e r o n . • Designed f o r o p e r a t i o n either A C mains o r 24VDC. • + 2 4 V DC o u t t o e x t e r n a l accessories ( m a x . 500mA). • AC p o w e r r e m o t e c o n t r o l ( S t a n d - b y LED) • O p t i o n a l FAULT DETECTOR MODULE(FD-20) can easily be f i t t e d f o r m o n i t o r i n g o f amplifiers a n d l o u d s p e a k e r line(short, o p e n ) failures. • Priority A u d i o i n p u t t e r m i n a l a n d p r i o r i t y control terminal. • PGM a u d i o m u t i n g level c o n t r o l l e r w h e n p r i o r i t y c o n t r o l signal i n p u t . • A p r i o r i t y relay c o n t a c t o f t h e o u t p u t termina Iboard allows emergency paging t o be d i s t r i b u t e d t h r o u g h 3 - w i r e o r 4 - w i r e system w i r i n g t h a t requires t h e DC p o w e r supply. • O p t i o n a l f a u l t d e t e c t o r m o d u l e makes d e t e d t i o n o f speaker line f a u l t o r a m p l i f i e r fault and change f r o m fault amplifier into Stand-by a m p l i f i e r b y JFS-381 (Fault s t a n d ­ by A M P s w i t c h e r ) . Input sensitivity/Impedance (PGM, 0 d B u ( 0 . 7 7 5 V ) / 6 6 k Q Bal Priority) Rated Output JPA-120D/DP/DPT: 120W(RMS) JPA-240D/DP/DPT: 240W(RMS) JPA-360D/DP/DPT: 360W(RMS) JPA-480D/DP/DPT: 480W(RMS) Output Impedance EUROPE AMERICA 25V 50V 100V 25V 35V 70V 'A-120D/DP/DPT 5.20 20.80 83.30 5.20 10.40 41.70 JPA-240D/DP/DPT 2.60 2.60 1.70 20.80 1.70 10.40 41.70 6.90 27.80 5.20 JPA-360D/DP/DPT 3.50 13.90 JPA-480D/DP/DPT 1.30 5.20 1.30 2.60 10.40 Frequency Response Less than-3dB (35Hz~ 20kHz) Signal to Noise Ratio More than 100dB("A" weight) 20.80 THD Less than 0.5% (1kHz) Input Filter(H.P.F) 400Hz/-3dB Power Consumption JPA-120D/DP/DPT: 328W JPA-240D/DP/DPT: 735W JPA-360D/DP/DPT: 1100W JPA-480D/DP/DPT: 1420W 1/8 Power Current draw JPA-120D/DP/DPT: 1.45A/0.77A 120V/230V JPA-360D/DP/DPT: 4.36A/2.4A JPA-240D/DP/DPT: 2.97A/1,6A JPA-480D/DP/DPT: 5.5A/3.1A 1/3 Power Current draw JPA-120D/DP/DPT: 2.13АЛ.13А JPA-240D/DP/DPT 4.46A/2.39A 120V/230V JPA-360D/DP/DPT: 6.5A/3.6A JPA-430D/DP/DPT 8.2A/4.6A Rated Power Current draw JPA-120D7DP/DPT: 3.32A/1.77A JPA-240D/DP/DPT: 7.0A/3.75A 120V/230V JPA-360D/DP/DPT: 10.4A/5.7A JPA^80D/DP/DPT: 13.6A/7.4A Power(option) 120V/230V/240VAC Dimensions(mm) 483(W) X 88(H) X 374(D) (inch) 50/60HZ , 24VDC 19(W) X 3.5(H) X 14.7(D) Weight(kg/lbs) JPA-120DVDP/DPT: 12.5/27.6 JPA-360D/DP/DPT: 17.5в8.6 JPA-240D/DP/DPT: 14.5в2.0 JPA480D/DP/DPT: 18.5/40.8 heat-sink ADDED FUNCTION OF DPT SERIES • Fault m o n i t o r i n g o f f a n f a u l t , DC fuse f a u l t a n d AC fuse f a u l t . Ф E £ о и P 3 •о о 1 llllll « о In H [ MULJbf JPA-DP Series 14 о] ° DDDDDDD "DDDDD JPA-DPT Series FD-20 DODD I D ШЙС шшшшшшшшшшшшш JPA-2120D/DP/DPT, 2240D/DP/DPT 2 CHANNEL PA POWER AMPLIFIER FEATURES • Rated o u t p u t s : 6 0 W X 2 , 1 2 0 W X 2 , 2 4 0 W X 2(RMS). • I n p u t l e v e l : 0 d B u ( 0 . 7 7 5 V ) 6 6 k Q balanced.(2 P r o g r a m a n d 2 Priority Inputs) • Full p r o t e c t i o n f o r p r o d u c t reliability. - O v e r l o a d a n d speaker line s h o r t l i m i t e r circuit. SPECIFICATIONS Input sensitivity/Impedance Rated Output JPA-2120D/DP/DPT: 240W(RMS) X 2(240W) JPA-2240D/DP/DPT: 480W(RMS) X 2(480W) Output Impedance AMERICA EUROPE - Over c u r r e n t l i m i t e r c i r c u i t . • A u t o m a t i c variable s p e e d FAN by temperature o f heatsink. • 4 0 0 H z f i l t e r t o i m p r o v e clearance o f s o u n d quality f o r matching o f resonant sound o f i n n e r side. 0dBu(0.775V) / 6 6 k 0 Bal (PGM, Priority) 25V 50V 100V 25V 35V 70V JPA-2120D/DP/DPT 5.20 20.80 83.30 5.20 10.40 41.70 JPA-2240D/DP/DFT 2.6U 10.40 41.70 2.60 5.20 20.80 Frequency Response Less than -3dB (35Hz~ 20kHz) Signal to Noise Ratio More than 10OdB ("A" weight) THD Less than 0.5% (1kHz) Input Filter(H.P.F) 400Hz/-3dB • 25V, 3 5 V , 50V, 7 0 V a n d 1 0 0 V O u t p u t s f o r m a c t h i n g o f speaker i m p e d a n c e ( o p t i o n a l ) . Power Consumption JPA-2120D/DP/DPT:670W • S c r e w t e r m i n a l s f o r signal i n p u t t o m a k e a n easy i n s t a l l a t i o n . 1/8 Power Current draw JPA-2120D/DP/DPT: 2.8A/1.4A • Soft start circuit f o r A C p o w e r o n . 120V/230V JPA-2240D/DP/DPT: 5.6A/2.8A • D e s i g n e d f o r o p e r a t i o n either A C mains o r 24VDC. 1/3 Power Current draw JPA-2120D/DF7DPT: 4.4A/2.2A 120V/230V JPA-2240D/DP/DPT: 8A/4A • + 2 4 V DC o u t t o e x t e r n a l accessories ( m a x . 500mA). Rated Power Current draw JPA-2120D/DP/DPT: 6.8A/3.4A 120V/230V JPA-2240DVDP/DPT: 13A/6.6A • AC p o w e r r e m o t e c o n t r o l ( S t a n d - b y LED) • O p t i o n a l FAULT DETECTOR MODULE(FD-20) can easily be f i t t e d f o r m o n i t o r i n g o f a m p l i f i e r s a n d l o u d s p e a k e r linefshort, o p e n ) failures. Power(option) 120V/230V/240VAC Dimensions(mm) 483(W) X 88(H) X 374(D) JPA-2240CVDP/DPT: 1300W (inch) 50/60HZ, 24VDC 19(W) X 3.5(H) X 14.7(D) Weight(kg/lbs) JPA-2120D/DP/DPT: 17.5/38.6 JPA-2240D/DP/DPT: 21.0/46.3 • Priority A u d i o i n p u t t e r m i n a l a n d p r i o r i t y control terminal. • P G M a u d i o m u t i n g level c o n t r o l l e r w h e n p r i o r i t y c o n t r o l signal i n p u t . • A p r i o r i t y relay c o n t a c t o f t h e o u t p u t termina Iboard allows emergency paging t o be d i s t r i b u t e d t h r o u g h 3 - w i r e o r 4 - w i r e s y s t e m w i r i n g t h a t requires t h e DC p o w e r supply. t! • Optional fault detector module makes d e t e d t i o n o f speaker line f a u l t o r a m p l i f i e r fault and change f r o m fault amplifier into S t a n d - b y a m p l i f i e r b y JFS-381 (Fault s t a n d - b y A M P switcher). 1 heat-sink -o с Э о (Л ADDED FUNCTION OF DPT SERIES • Fault m o n i t o r i n g o f f a n f a u l t , DC fuse f a u l t ф a n d A C fuse f a u l t . Е Е о и 3 •о о С *™v-*«. a » "|. inIImiiIIIIimi«IIIIHI11 i.«5R'№ ч а % * 4 ctшиошшшш! и i и i ij§ffi "Ш; n ^дтЩ5,ттп, UL IU • ram 4epeqo ~[jf «па J J cWuULJ ~ •H=K" MljUlljUIILJijLllJuuULJn i JPA-DP Series FD-20 JPA-DPT Series 0 DDGD t r j f f l o 1 C_^%KL 15 P.A. Amplifier JPA-4120D/DP/DPT, 4240D/DP/DPT 4 CHANNEL PA POWER AMPLIFIER Jf,A 4240DP lP,trow*»W*» - nT^T*~iI^ FEATURES и 3 •o I • Rated outputs: 60W X 4, 120W X 4, 240W X 4(RMS). • Input level:0dBu(0.775V)66kQ balanced.(4 Program and 4 Priority Inputs) • Full protection for product reliability. - Overload and speaker line short limiter circuit. - Over current limiter circuit. • Automatic variable speed FAN by temperature of heatsink. • 400Hz filter to improve clearance of sound quality for matching of resonant sound of inner side. • 25V, 35V, 50V, 70V and 100V Outputs for macthing of speaker impedance(optional). • Screw terminals for signal input to make an easy installation. • Soft start circuit for AC power on. • Designed for operation either AC mains or 24VDC. • +24V DC out to external accessories (max. 500mA). • AC power remote control(Stand-by LED) • Optional FAULT DETECTOR MODULE(FD-20) can easily be fitted for monitoring of amplifiers and loudspeaker line(short, open) failures. • Priority Audio input terminal and priority control terminal. • PGM audio muting level controller when priority control signal input. • A priority relay contact of the output termina Iboard allows emergency paging to be distributed through 3-wire or 4-wire system wiring that requires the DC power supply. • Optional fault detector module makes detedtion of speaker line fault or amplifier fault and change from fault amplifier into Stand-by amplifier by JFS-381 (Fault stand-by AMP switcher). ЛМИИК»» ToroliMI ««»•"> SPECIFICATIONS Input sensitivity/Impedance (PGM, Priority) Rated Output Output Impedance i Frequency Response Signal to Noise Ratio THD Input Filter(H.P.F) Power Consumption 1/8 Power Current draw 120V/230V 1/3 Power Current draw 120V/230V Rated Power Current draw 120V/230V Power(option) Dimensions(mm) (inch) Weight(kg/lbs) OdBu(0.775V)/66kQ Bal JPA-4120D/DP/DPT : 240W(RMS) X 4(480W) JPA-4240D/DP/DPT : 480W(RMS) X 4(960W) EUROPE AMERICA 25V 50V 100V 25V 35V 70V JPA-4120D/DP/DPT 5.20 20.80 83.30 5.20 10.4O41.7O JPA-4240D/DP/DPT 2.60 10.4O 41.70 2.60 5.20 20.80 Less than -3dB (55Hz ~ 20kHz) More than 100dB("A" weight) Less than 0.5% (1kHz) 400Hz / -3dB JPA-4120D/DP/DPT: 1300W JPA-4240D/DP/DPT: 2500W JPA-4120D/DP/DPT: 6A/3A JPA-4240D/DP/DPT: 10A/5A JPA-4120D/DP/DPT: 8.8A/4.4A JPA-4240D/DP/DPT: 15A/7.5A JPA-4120D/DP/DPT: 13.6A/6.8A JPA-4240D/DP/DPT : 23.6A/11.8A 120V/230V/240VAC 50/60HZ, 24VDC 483(W) X 133(H) X 440(D) 19(W) X 5.2(H) X 17.3(D) JPA-4120D/DP/DPT: 26.5/58.4 JPA-4240D/DP/DPT: 29.6/65.3 ADDED FUNCTION OF DPT SERIES • Fault monitoring of fan fault, DC fuse fault and AC fuse fault. JPA-DP Series FD-20 о 0 16 JPA-DPT Series DDDq^fflo ,VJ "ЯЯГ ^ " . K . JPA-130IMP, 250NP URAL COOLING SYSTEM AMPLIFIER FEATURE SPECIFICATIONS • Without speed FAN, it is controlled heatsink overheatted and NO FAN noise. • Full protection for product reliability. •TECHNICAL Input Sensitivity / Impedance 0dBu(0.775V) / 60klsY BAL Rated Output 130NP:130W(RMS) - Overload and speaker line short limited circuit • 400Hz filter to improve clearance of sound quality 250NP: 250W (RMS) Output Level / Impedance EUROPE AMERICA 25V 35V 70V JPA-130NP 5 0 190 770 5 0 9.40 380 JPA-250NP 2.SL 100 40O 2.50 50 20O LESS THAN -3dB (35Hz -20KHz) More Than 100dB ("A" WEIGHT) Less than 0.5% 400Hz/-3dB JPA 130NP : 330W , JPA 250NP : 740W AC120-240V~,50/60Hz DC 24V 483(W) x 133(H) x 379(D) mm 19(W)x 5.2(H) x 15.6(D) inch JPA-130NP 15 Kg/30.6 lbs JPA-250NP 16 kg/32.0 lbs for resonant sound of inner side. 25V • Designed for operation either AC mains or 24VDC. • Optional FAULT DETECTOR MODULE (FD-20) can easily be fitted for monitoring of amplifiers and Frequency Respones loudspeaker line (shot, open) failures. Signal to Nose ratio T.H.D Input Filter (H.P.F) Power Consumption Power Dimensions Weight 50V 100V JFS-381 FAULT STAND-BY SWITCHER I •o SPECIFICATIONS FEATURE •TECHNICAL • Stand-By amplifier will be turn on automatically Capacity | operatating to announce emergency situation or Audio i n p u t / A M P INPUT : important broadcasting. AMP output/SPK LINE 1 :1 incase main amplifier is out of order on the way of • LED indicator will be flashed and buzzer will make sound. • AC/DC 24V шявшяшшшCD55.-CD CD CD CD CD CD ED CDBs- д=-д| п ш ш ш а в св~. Tsaf-", "' *" DB^ ••_ а». св_ св^ сш, ЙИ-Ш?™ 8 Main Amplifiers с о 1Л 1 Stand-by Amplifier 1:1 E £ о и Frequency response Less than-0.5dB (20Hz~20kHz) Signal to Noise ratio More than 86dB •с T.H.D Less than 0.005% •о Cross-talk More than 80dB Power Consumption 12W •GENERAL Power(option) 120V/230V/240VAC 50/60HZ, 24VDC Dimensions(mm) 483(W)x133(H) x 350(D) Weight(kg/lbs) 7.0/15.4 з о •а с о 1Л с о 19(W)x 5.2(H) x 13.8(D) ! 17 00 Professional Sound Products Commercial Sound Produc ШШШЯтВШЯВШЯВВЯЯЯИвВШЯШЯВШШЯЯ System Connections FIRE SENSOR I JRA-051Atl| Ice f til T f % JRA-051A»4 JPTT-10 MICROPHONE AC MAINS OVERSEAS SALES 608, Hwa San-Ri, I Dong-Myeon, Yong In Kyung Gi-Do, Republic of Korea. ZIP CODE : 449-832 Tel:+82-31 -335-7064 / Fax:+82-31 -335-1911 web site:www.jedia.com / E-mail:[email protected] УЗ Professional Sound Products Commercial Sound Products Rack Type JSC-132A SPEAKER LINE CHECKER FEATURES SPECIFICATIONS • Watch Dog Function. •TECHNICAL • Ground Fault Detection. Check range • Speaker Line Impedance Check. Check time Less than 100m sec / Channel • Speaker Line Open Check. Signal input 32 Channel(with 4 relay board) • Speaker Line Over Load Check. Signal output 32 Channel(with 4 relay board) • Speaker Line Under Load Check. ADC resolution 10Bit(1024 step) 20-16000 • Speaker Line Short Check. • Max. 32 Speaker Lines(with 4 Relay Board). • Automatical check in adjustables time intervals between 1 minutes and 24 hours. • Double-spaced background-lighted liquid crystal •GENERAL Power Consumption 120V/230V/240VAC 50/60HZ, 24VDC Dimensions(mm) 483(W) x 44(H) x 200(D) display with clear text output. • Interruption of the check when emergency 23W Power(option) (inch) 19(W)x 1.7(H) x 7.9(D) 3.0/6.6 Weight(kg/lbs) announcement comes up. • Bridging of the existing volume control with the intergrated relay during the check. • Permissible speaker line check 100V/70V. • Store by No volatile memory(EE-PROM). • Alert sound and LED indicator when speaker line fault. • Buzzer off function. • AC and DC 24V operation. r<\ ^ d • Standard in height desktop or 19" rack mount. IN OUT IN OUT I 1 - p u _ p ^ -fH «9 9 ® <8>® 9 CHI 3 •o (5) IN OUT IN OUT IN OUT _рз-J~l -Pi­-pi—_pv- | ® CH2 в• » СНЗ ll!! IUl 9 • СН4 «1 "1 • « ii) ( IN OUT IN OUT IN OUT __(ZZU- p i - | l r~i 9 ®®0 9 ®®9 (»)9 • • СНв СНГ СН8 —pv--Pl- СНЯ о -о с 3 о 1Л 'С Ф £ Е о и 3 1 о. -а с I (О с о 20 Ml '< HI 1 StSBF'lCC E/M Audio Output E/M Message Card •General Power Consumption 3.5W Power Source DC 24V Dimensions(mm) 483(W)X 88(H) X 200(D) (inch) Recording Time-16sec (Extendiable Max 32sec) 19(W)X 3.5(H) X 7.9(D) Voice VR 3/6.6 Weight(gk/lbs) JES-120A E/M Speaker selector FEATURES SPECIFICATIONS • 20 contact inputs for fire-detection or emergency. •TECHNICAL 8 GENERAL •a с 3 о 10 Speaker controls 20lines Fire Directors 20lines • Digital communication with JRG-220A via RS485. Power consumption 3.6W(AII Operation) • In case of emergency all normal announcements Power DC 24V Dimensions(mm) 483(W)X 44(H) X 200(D) • Emergency zone speaker selector with individual LED indicators for use with JRG-220A. will stop. (inch) Weight(kg/lbs) "S 'О 01 19(W)X1.7(H) X 7.9(D) 3.3/6.6 E E о и (Л t; з о •о Data Out C€ I X—| DAT* OUT •MM!11 : ! : > Extension Terminals Extension Fire Detector Input ! 23 Rack Type JSS-120A ACTIVE SPEAKER SELECTOR FEATURES SPECIFICATIONS • Active zone speaker selector with individual LED indicators for use with JRG-220A. • Emergency LED indicator, "all call" function. • All speaker lines will be released in case of an emergency. • Compatible with other Jedia Emergency systems. • TECHNICAL & GENERAL Speaker controls Power Power consumption Dimensions(mm) (inch) Weight(kg/lbs) Speaker Selector Out \.Щ:У: :W [ 20lines DC 24V 3.5W(AII Operation) 483(W)X 44(H) X 200(D) 19(W)X 1.7(H) X 7.9(D) 3.0/6.6 Remote All In пиши. MmESwAwnsEi-ECTon JUL MEDIA CO., LTD M A D E IN KOREA Remote Zone In « Я JSS-220P PASSIVE SPEAKER SELECTOR FEATURES SPECIFICATIONS • Passive zone or speaker selector with individual LED indicator. • 20 zones with relays. • 20 individual inputs, but easy to link. • "All select" connection for emergency situations. • DC 24V operation. • TECHNICAL 6 GENERAL Speaker controls Power Power consumption Dimensions(mm) (inch) Weight(kg/lbs) 20lines DC 24V 12W 483(W)X 88(H) X 200(D) 19(W)X 3.5(H) X 7.9(D) 4.0/8.8 AMP Out DC Power Speaker JDR-104 DATA RECEIVER FEATURES • Up to 4pcs of 20-zone paging microphone' s JRA-051 A. • 4 LED indicators "BUSY" to monitor the status. SPECIFICATIONS • 4 power "ON" LED's to check the operation. • TECHNICAL 8 GENERAL Input sensitivity / impedance Nor+4dBu/60Cm bal. • RS485 data communication to JRA-051A (UTPcat 5). Output level /impedance Nor+4dBu/60 is • TECHNICALS GENERAL MIC Input Level -50dB Output level/impedance +4dBu/600ohm bal. Frequency response Less than -3dB(200Hz-20kHz) Signal to noise ratio More than 68dB T.H.D Less than 0.05% Speaker Controls 20Lines Power consumption 3W Power 'С Б JRA-051 A lil^rdipiffilill ik ' U JDR-104 (inch) Weight(kg/lbs) 275(W) X 51 (H)X 156(D) 10.8(W)X2(H)X6.1(D) REMOTE 2 CARD "5 с о REMOTE-1 CARD 2/4.4 EMEHGENCV ("AHIt ! -с с 3 о m DC 24V Dimensions(mm) ш Е В о JRG-220A 1 25 JCS-110A CHIME & SIREN FEATURES SPECIFICATIONS • A four tone upwards & downwards melody. • TECHNICAL & GENERAL • Siren function; sweep and continuous tone. Chime Frequence 440HZ, 554Hz, 655Hz, 880Hz • Chime remote control by input terminal. Siren Frequence 800Hz • Balanced output. Output level /impedance More than 0.245V(-10dBm)/600Q bal. • AC operation • DC 24V operation. Signal to noise ratio more than 80dB. 1 3.5W. Power consumption Power 120V/230V/240VAC 50/60HZ, 24VDC Dimensions (mm) 483(W)X 44(H) X 200(D) (inch) 19(W)X1.7(H) X 7.9(D) Weight(kg/lbs) AC Power 2.5/5.5 Output Siren VR C€ Ш .ЧЧЛЛ1 I DC Power MODEL NO: JCS-110A CHIME! SIREN JIDIA CO., LTD, MADE IN KOREA Chime VR Chime Remote JSE-174A Signal Exchanger FEATURES SPECIFICATIONS • The balanced input system capable of eliminating the static induced to the signal line when combined with a long-distance signal source • ELECTRIC & GENERAL Signal Input is adopted. Main : 4EA Remote : 2EA • Composed of 4 independent channels and selection is perfromed by Emergency: 1EA 5W the broadcasting signal according to the order of emergency, Power Consumption remote, normal 1 and 2 broadcastings of each channel. Power Source DC 24V Dimensions(mm) 483(W) X 44(H) X 200(D) • Employed non-contact electronic switch to clear switch noise when converting to the broadcasting. (inch) • Sound output is possible whether'+' or'-' of the output circuit Weight(kg/lbs) 19(W)X 1.7(H) X 7.9(D) 2.5/5.5 polarity is grounded and direct current statis is minimized as * 15V power source motivates the operation of circuit. Audio Output DC Power PGM IN A (И) амид О ' " EM/RM DC Input EM/RM Input JNC-111 3ISE CONTROLLER SPECIFICATIONS FEATURES • Automatic variable adjustment of amplifier input level by ambient noise level. • Useful for noise area like department store, lecture room. • Permissible 500m of JND-011 (Ambient noise detector) from the JNC-111 (Ambient noise controller). • High efficiancy electronic balanced, circuit capable of eliminating the exterior static induced to the signal is adopted. • DC 24V battery for unexpected AC failure. • Built in filter circuit to detect specific noise(Filter/Hz). • Use of high sensitivity condenser MIC or Dynamic Microphone. Rated Output THD Ratiolnput Frequency Power Consumption Power(option) Dimensions(mm) 0dBm/30KQ bal 0dBm/200Q bal -1dB0|L(j(20Hz~20KHz) 7.5W 120V/230V/240VAC 50/60HZ, 24VDC JNC-111:483(W) X 44(H) X 200(D)mm JND-011 : 81 (W) X 60(H) X179(D)mm JNC-111 : 2.7kg, JND-011 : 0.5kg Weight(kg/lbs) JTU-110B AM/FM TUNER FEATURES SPECIFICATIONS • 6+6+6 FM Presets. • 6+6 AM Presets. • Retains Presets When Power is Off. • Large LCD Digital Display. • SCAN And SEEK Functions. • Auto Store Memory Function(A/PS). • Preset Memory SCAN Function(A/PS). • Signal Strength Meter. • Balanced Mono XLR Output. • Unbalanced Stereo RCA Output. • AC and DC 24V operation. • Standard 1 Space EIA Rack Chassis. • TECHNICAL 8 GENERAL Tuning range ANT Input AC Power Usable sensitivity Signal to noise ratio Memory Back-up Output level Variable output Ficed output Power consumption Power source Dimensions(mm) (inch) Weiqht(kq/lbs) DC Power Variable Output Fixed Output I FM 87.5-108MHz AM 522-1620kHz FM : 75ohm coxial cable AM : Loop antenna and lead antenna FM : 2/il AM : 4.5/A1 FM : 60dB AM : 45dB For 45days(After AC Power Off) 0.245V(-10dBm) Unbalanced 0.775V(0dBm) Balanced 7.3W 120V/220V/230V/240VAC 50760Hz, 24VDC 483(W)X 44(H) X 120(D) 19(W)X1.7(H) X 5(D) 3.2/7.1 AntennaTerminal •a с з о Ф E E о и о I I 27 J6CD-10 6CD CHANGER FEATURES • Auto 6CD CHANGER deck mechanism. • Possible remote control. • Play / pause function. Remote Controller(Option) • Eject function. JCD-RC • Disc selection (D-UP, D-DN). • Track select function (T-UP, T-DN). • Repeat(DISC) function (RPT). • Random(DISC) function (RDM). • Scan(DISC) function (SCAN). • Pick-up (SANYO). • L, R stereo output and mono output. • AC operation - DC 24V operation. • LCD display. • Damper structure by external oil damper(4units) and coil spring(2units) SPECIFICATIONS •TECHNICAL & GENERAL Output level mono 0dB(0.775V)/bal Digital filter 8-times over sampling T.H.D(IKHz) less than 0.03%(JIS A) Signal to noise ratio(lkHz) more than 85dB(JIS A) Dynamic range(lkHz) more than 70dB L,R 0dB(O.775V)/unbal Channel separation(lkHz) more than 70dB(JIS A) Frequency Response 20Hz~20KHz(±3dB) Wow / flutter below measurable limit Access time long max 8 sec short max 2 sec 6W Power consumption Power(option) 120V/220V/230V/240VAC 50/60HZ, 24V DC Dimensions(mm) 483(W) X 88(H) X 260(D) (inch) 19(W)X 3.5(H) X 10.2(D) Weight(kg/lbs) AC Power 7.5/16.5 DC Power Output Remote Control C€ ro НЕМОТЕ CONTROL jhliiii inimij ф VIS Uli M O D E L NO.: J 6 C D - 1 0 BCD C H A N G E R JIDI*CO.,LTD. МЛП! IN КОШ Л JMA-1410 PREAMPLIFIER SPECIFICATIONS FEATURES • TECHNICAL & GENERAL Input sensitivity/ impedance Output level / impedance Frequency response Signal to noise ratio T.H.D Cross-talk Power consumption Power(option) Dimensions(mm) (inch) Weight(kg/lbs) DC Power J= Rec. Output MIC/LINE : -50dBu(2.45mV/5ka bal -10dBu(2.45mV)/5kQ bal LINE RCA IN : -10dBu(245mV)10kffi unbal Master 1,2: Nor +4dBu(21.23V)/200Q bal REC : Nor 0dBu(0.775mV)10kffi unbal Less than -0.5dB(20Hz ~20kHz) MIC : more than 60dB LINE : more than 75dB MIC : less than 0.05% LINE : less than 0.03% MIC : more than 60dB LINE : more than 75dB 13W 120V/220V/230V/240V AC, 50/60HZ 24V DC 483(W) X 44(H) X 235(D) 19(W)X 1.7(H) X 9.3(D) • High Quality 10 input / 2 zone output pre-amp mixer. • 10 channels with individual master-output selector (output 1, output 1+2, output 2). • Line/Mic/Mic-lowcut with phantom selector on every channel. • High Pass Filter. • Input signal indicator. • Chime signal with internal tone selector. • Automatic priority for channel 1-3. • Signal input by XLR (2-10) & RCA channel 7-10. • DIN connection for P.T.T. remote on ch.1 (JPTT-10). • 2 individual XLR balanced master-outputs with bass/treble and led indicators. • Record output. • AC operation - DC 24V operation. 3.9/8.6 Mic Input 7-10 P.T.T. Remote Mic Chime Remote S/W JPTT-10 L Accessory Output 1,2 Line Input 7-10 Mic / Line Input 2-6 V p.T.T-1 JAD-125A AUDIO DISTRIBUTION AMPLIFIER SPECIFICATIONS FEATURES • • • • • • High quality electronic balanced inputs & outputs. All XLR connectors. 10ch mono, 5ch stereo. Output volume control. Low noise power supply.(operating voltage ? 15V). AC operation - DC 24V operation. • TECHNICAL & GENERAL Input sensitivity / Impedance Output level / Impedance Frequency response Signal to noise ratio T.H.D Cross-talk Power consumption Power Source Dimensions(mm) (inch) Weiqht(kq/lbs) 0.775V(0dBm)/15kffl bal 0.775V(0dBm)/600Q bal Less than -0.5dB(20Hz ~20kHz) More than 94dB Less than 0.05%(20Hz ~20kHz) More than 75dB 6.5W 120V/230V/240VAC 50/60HZ 483(W)X 44(H) X 200(D) 19(W)X 1.7(H) X 7.9(D) 2.9/9.9 с 3 о .2 С ш Е Е о U 1Л V з TJ о а. •о DC Power CH1 Output с 3 Rack Type JFS-142A FEED BACK SUPPRESSOR FEATURES SPECIFICATIONS • High fidelity electronic balanced inputs. Input sensitivity / Impedance 0.775V(0dBm)/15kQ bal • Mono, stereo announcement for input, output by 1:10, 2:5. Output level / Impedance 0.775V(0dBm)/600Q bal • Volume control per output. Frequency response Less than -1dB(20Hz ~20kHz) • Minimum noise of power supply(operating voltage 15V). Signal to noise ratio More than 94dB • Permissible any type polarity to the ground. T.H.D Less than 0.4%(20Hz ~20kHz) • 4-bands notch filter to reduce feedback. Nolch Filter Frequency 60Hz~6kHz(Continuous Variance) Notch Depth 0 ~ -20dB Power consumption 9.9W DC Power maratb TjL. i - • - . 1Г W AC Power гHI шин -ISr • у - ? C, 1 Output J 3 AC power 120V/230V/240VAC 50/60Hz Dimension(mm) 483(W)X 44(H) X 200(D) (inch) Weight(kg/lbs) 19(W)X1.7(H) X 7.9(D) j 4.5/9.9 JEQ-215A GRAPHIC EQUALIZER 15 BAND STEREO FEATURES SPECIFICATIONS • TECHNICAL & GENERAL Inputs Type Impedance(ohm) Outputs Type Min. load impedance Source impedance Max. level Performance Frequency response (20Hz-20kHz) Distortion(@+4dBm) Equivalent input noise (20Hz-20kHz unweighted) Channel separation Clip indicator Level Filters Center frequencies ± 5 % • High quality balanced inputs. • High pass, low pass filter. • High precision faders. • EQ bypass function. • AC operation, DC 24V operation 1 1 I I ! 1 I DC Power C€ . ;АЛ AC Power 30 Output iJ&J Input Maximum boost/cut Low, high cut filter (12dB/octave-3dB) Power consumption Voltage Dimensions(mm) (inch) Weight(kg/lbs) Active balanced 15K 2-Channel Active balanced 600ohm <100ohm -24dBm -1.0dB <0.03% @1kHz <70dB >75dB@1kHz +18dB ±12dB 15 band(2/3 octave) 25,40,63,100,160, 250,400, 630,1K,1K6,2K5,4K,6K3, 10K.16K ±12dB 40Hz, 16kHz 120V/230V/240VAC 50/60Hz, 24VDC 483(W)X 88(H) X 235(D) 19(W)X3.5(H)X9.3(D) 3.9/8.6 JFC-152 ANTI FEEDBACK CONTROLLER FEATURES SPECIFICATIONS Technical Input Sensitivity / Impedance Up to +20dBu / 60klsY BAL Output Level / Impedance Up to +20dBu / 50k(5Y BAL Frequency Shift Adjustable from 3 to 15Hz Signal to Nose ratio More Than 70dB General Frequenvy Response -1.0dB(20Hz~20KHz) Power Consumption MAX 3.7W • • • • It is to control feed-back when you properly design sophisticated sound. Accept Noise Gate and it makes more reliable. Input Signal has By-Pass function. The country voltage will not affect the product. So the product works all voltage. • When you use this at public places, like hospital, hotel, church, sport center, it is easy to control feel-back and even if situation is emergent, you will manage properly. • Watch dog function. ч s DC Power Power 100-24uV~,50/60HZ4w Dimensions 483(W) x 44(H) x 200(D) mm Weight 2.47Kg / 5.44lbs 19(W)x 1.7(H) x 7.9(D) inch AC Power Output JEQ-231A iRAPHIC EQUALIZER 31 BAND SPECIFICATIONS • TECHNICAL 8 GENERAL Type Active balanced 15K Impedance(ohm) FEATURES ; Outputs 1-Channel • High quality balanced inputs. Min. load impedance 600ohm • High pass, low pass filter. Source impedance <100ohm • High precision faders. Max. level +24dBm • EQ bypass function. Performance • AC operation - DC 24V operation. Frequency response -1.0dB(20Hz-20kHz) Distortion(@+4dBm) <0.03%@1kHz Equivalent input noise <70dB (20Hz-20kHz unweighted) Clip indicator +18dB Level ±12dB Filters 31 band(1/3 octave) 20,25,31.5,40,50,63,100,200, 250,315,400,500,630,1K, Output Input E E о u 1K25,1K6,2K,2K5,3K15,4K, ъ з о Maximum boost / cut ±12dB Low, high cut filter 40Hz,20kHz •D С 3 Voltage 100-240V~,50/60HZ4w Dimensions(mm) 483(W)X 88(H) X 235(D) То с о о Power consumption (inch) DC Power ьQ. •D С 3 О 1Л 5K,6K3,8K,1 OK, 12K5,16K.20K (12dB/octave-3dB) 1ИИД "§ 01 Center frequencies ± 5 % AC Power X, з Weight(kg/lbs) 1/1 19(W)X3.5(H)X9.3(D) 3.9/8.6 01 *^ S а. 31 Rack Type JEQ-1311 GRAPHIC EQUALIZER 31 BAND MONO FEATURES • TECHNICALS GENERAL • BALANCED INPUT High efficiency electronic balanced circuit capable of eliminating the exterior static induced to the signal is adopted. • BALANCED OUTPUT You can ground any polarity " + " , "-" to sound output and DC hum will be minimized by ± 15V power supply. • HIGH PASS FILTER(LOW CUT), LOW PASS FILTER(HIGH CUT) Input Sensitivity/Impedance 0.775V(0dBm)/15kffi balanced Outputs Level/Impedance 0.775V(0dBm)/600ffi balanced Frequency response Less Than -1.0dB(20Hz-20kHz) Signal to Noise Ratio More Than 68dB High Pass Filter(Low Cut) 40Hz-12dB/Oct Low Pass Filter(High Cut) 20kHz-12dB/Oct Band 20,25,31.5,40,50,63,80, You can select two pass filter for the sound clearness. 100,125,160,200,250,315, • BY-PASS 400, 500, 630, 800, 1 К, 2К, By depressing the EQ IN switch input signal deliver to output directly. 2.5K, 3.15K,4K, 5K, б.ЗК, 8К, • 1 CHANNEL 31 BAND GRAPHIC EQUILZER | _ JEQ-1311 contains 31 Band for 1 Channel which intervals of each band 1/3 T.H.D. octave from 20Hz to 20kHz. • USE OF EMERGENCY BATTERY 10K, 12.5K, 16K, 20K(Hz) Less than 0.03% EQ boost/cut ±12dB Power consumption 7.5W You can operate this model by using emergency battery for unexpected AC power faulure. f • GENERAL DC Power ~= < Lii ДРА Output I jgL, Q"4>7 Power(Option) Input -L -ro ь. AC Power 100-240V~,50/60Hz 4w Dimensions(mm) 483(W)X 44(H) X 200(D) (inch) J 19(W)X1.7(H) X 7.9(D) Weight(kg/lbs) 3.0/6.6 JEQ-2312 GRAPHIC EQUALIZER 31 BAND FEATURES a. •a I .2 ! • BALANCED INPUT High efficiency electronic balanced circuit capable of eliminating the exterior static induced to the signal is adopted. • BALANCED OUTPUT You can ground any polarity " + " , "-" to sound output and DC hum will be minimized by ± 15V power supply. • HIGH PASS FILTER(LOW CUT), LOW PASS FILTER(HIGH CUT) You can select two pass filter for the sound clearness. • BY-PASS By depressing the EQ IN switch input signal deliver to output directly. • 2 CHANNEL 31 BAND GRAPHIC EQUILZER JEQ-2312 contains 31 Band for 2 Channel which intervals of each band 1/3 octave from 20Hz to 20kHz. • USE OF EMERGENCY BATTERY You can operate this model by using emergency battery for unexpected AC power faulure. DC Power Output Input Sensitivity 0.775V(0dBm)/15kQ balanced /lmpedance(Ch1,Ch2) Outputs Level 0.775V(0dBm)/600Q balanced /lmpedance(Ch1,Ch2) Frequency response Less Than -1.QdB(20Hz-20kHz) Signal to Noise Ratio More Than 68dB High Pass Filter(Low Cut) 40Hz -12dB/Oct Low Pass Filter(High Cut) 20kHz -12dB/Oct Band 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 400, 500, 630, 800, 1K, 2K, 2.5K, 3.15K, 4K, 5K, 6.3K, 8K, 10K, 12.5K, 16K, ?0K(H7) T.H.D. Less than 0.03% EQ boost/cut ±12dB Power consumption 16.8W Input •GENERAL Power(Option) 100-240V~,50/60HZ 7w Dimensions(mm) (inch) AC Power Weight(kg/lbs) 483(W)X 88(H) X 200(D) 19(W)X 3.5(H) X 7.9(D) 5.0/11.0 JEP-352 EMERGENCY POWER SUPPLY SPECIFICATIONS • TECHNICAL & GENERAL FEATURES Charging off Aprox. 27.3V DC Charging current 2.5A limited Power consumption 105W Power(option) 120V/220V/230V/240VAC 50/60HZ, 24VDC Dimensions (mm) 483(W)X133(H) X 350(D) • Permissible battery built-in or use of battery from (inch) outside.(extended battery) Weight(kg/lbs) • Automatic battery charge and discharge. 19(W)X 5.2(H) X 13.8(D) built-in battery 29 / 64 not built-in battery 11.6/ 25.6 • Automatic covertable AC power to DC power when unexpected AC powers failure. • Battary(option) • Built-in fuse for 24V DC per output.(Fuse change at Dimensions(mm) the rear). (inch) • Protection circuity for battery against over current, Capacity 175(W) X125(H) X 166(D) 6.9(W)X 4.9(H) X 6.5(D) 12V/24AHX2 over voltage. • LED indicator for battery charge or rechargable EXT-BATTERY-TERMINAL amount. • An airtight battery built-in makes not leakage of gas when recharging. -fiUMMCf • Protection circuit against msiconnecting o f " + , -" polarity. AC Power JPD-322A POWER DISTRIBUTOR tJ э FEATURES "§ • 9+1 AC outlets. • Two 24V DC output terminals. • Automatic 24V DC power control on emergency situations. • Constant power supplying 24V DC to the Remote Amp, E/M speaker selector a. •a с з о in matrix unit, E/M unit in the rack system (power supply from battery). 1-9 OUT FUSE AC FUSE • Built-in protection against 24V DC output terminal short. • Fuse built-in per AC outlet (fuse exchange at the front panel). SPECIFICATIONS • Power output delay functions to reduce surge power peak when re-supplying •TECHNICAL в GENERAL DC power 24V/1.5AmaxX2 AC power Switched 1-6:230VAC/7000VA(30A) the rack system i 120VAC/3600VA(30A) -o с 3 о Switched 7-9 : Each max 115VA Unswitched 360VA max Power consumption 120W(DC Power 24V/3A Load) ! l/l "(5 с о Power(option) 120V/230V/240VAC 50/60Hz(option) Dimensions(mm) 483(W)X133(H) X 200(D) 'Д 19(W)X 5.2(H) X 7.9(D) | (inch) Weight(kg/lbs) 8/17.6 (Л AC IN( @~AC~) Switched AC Outlet i 1-6 : AMP series, 7 - 9 : EFFECT series Power Control О а 33 Rack Type JRG-220A RELAY GROUP SPECIFICATIONS FEATURES • TECHNICALS GENERAL • 20-zone routing system for use with JSS-120A, JEU-211A, JES-120A, JDR-104, JRA-051A. Speaker controls 20lines • Suitable for evacuation- and emergency applications. Signal exchanger circuit 1 circuit • Internal priority signal exchanger (cascade). Speaker line connection 2-wire • Easy configuration of every zone by programmable internal matrix. ATT. 3-wire • Connection of several microphone-stations(JRA-051 A, JDR-104). ATT. 4-wire. • Priority for passive volumecontrols by 3-wire & 4-wire system. Low Imp AMP 2-wire Main & Local AMP ATT.2-wire • RS485 connection for long data communication (up to 11 km). Power consumption 11.5W Power DC 24V Dimensions(mm) TELEPHONE PAGING САГО (inch) НЕИ0П-1 CARD Weight(kg/lbs) H 1. 2-WIRE 483(W)X133(H) X 350(D) 19(W)X 5.2(H) X 13.8(D) 8.5/18.7 4.LOW IMPEDANCE AMP 2-WIRE !©l IPS] -V m OOVOUT lOdfca &к—СЗИ M . T - , E/M24V/0.2A DIRECT 24V/ 0.2Д з 2. ATT.3-WIRE i| T + Э - •o e 3 5. MAIN & LOCAL AMP ATT.2-WIRE 3. ATT.4-WIRE I E/M24V/0.2A DIRECT 24V/ 0.2» DIRECT 24V/ 0.2A 34 4П.8П ,25V OUT mil E/M Output Remote Control Remote Audio Input Priority Remote Data E/M Audio Input Connection to JSS-120A Upper JRG-220A E/M Data EMERGENCY CARD(Built-in) REMOTE-1 CARD AMP Prority FROMJSS-120A REMOTE-1 CARD(Built-in) "CP", "DP" TYPE AMP AMP 1 -<] -r—o^o I, L-o^o 8PK1 Group 1 <] 8PK8 I I Group 2 <] SPK10 -<] SPK11 Group 3 o—--—<] 8PK 20 Group 4 RELAY BOX 3 1 T3 С 3 О l/l "5 'C OJ Remote Data Link Remote Data Input Remote Audio Input REMOTE-2 CARD(Option) +5V Output Tel. Ex. Relay contact TEL AUDIO Input TELEPHONE PAGING CARD(Option) E E о и I I 1 о i- a. 35 Rack Type MMA-400 MODULE MIXER AMPLIFIER FEATURES • • • • • • • Permissible various type module Various programming for purpose Up to 10 input module Extendable to two MMA-400 Function of audio mixer with 19" rack mounted AC and DC 24V operation Connection to JPM-10(Paging Mic) SPECIFICATIONS •TECHNICAL & GENERAL Module Type MMA-400 Applications Module Mixer Preamplifier with PS-02 Output Voltage Output Current Power Requirement 10 Modules Input Capacity Basic Configuration Up to 8 Input Modules / 2ch(16 Inputs) PS-02 Power Supply Module 18V DC MAX 2.5A AC 120V/220V/230V/240V, 50~60Hz, DC 24V 2 Output Modules / 2ch(4 Outputs) Extension Configuration Power Consumption Current Consumption Up to 10 Input Modules / 2ch(20 Inputs) Programming Functions Connections Extension Output RJ-45 Jacks Extension Input RJ-45 Jacks Extension In/Out: RJ-45 8-pin Mother Board : 32-pin DIN CON Dimensions(mm) (inch) Weight(kg/lbs) Finish 483(W)X177(H) X 260(D) 19.0(W)X 7.0(H) X 10.2(D) 8.5 /19.7(with PS-02) Dark Gray з 1 1 MAX59W AC 230V MAX 320mA AC 120V MAX 640mA DC 24V MAX 2A Extension ON/OFF Jumpers Input AC : AC Inlet Input DC : 2-pin Terminal Block Output: 32-pin DIN CON 40(W)X 172(H) X 275(D) 1.57(W)X 6.77(H) X 10.8(D) 1.6/3.5 Dark Gray JPM-10 PAGING Microphone Ш FEATURES • Chime & priority function by P.T.T. (Push To Talk). • Unidirectional microphone to reduce feedback. • Auto chime function for use with MMA-400 36 •utl 1 gi f й*"й й. Й & e I •t <• •fl •* ти ?• ?4 . PS-02 Power Supply Qj£T йТй л_б Й _ p. Lib !_|>_Г EJ ЛХ41® Sr"_p й...Й ft] й ft, Й Щ •r J' t_^_T •t •? ?• • f о Ш Ш* m •? •t m °~A№ ЧЛ •? u ?4 •» . ML42 MIC/LINE Module •r fefl LN42 LINE Module AX42 Auxiliary Module И1Н , ) 1' > CA42 Chime & Alert Module DM46 Digital Message Module MS12 MASTER 1.2 Module MS34 MASTER 3.4 Module Module Mixer Frame MMA-400 with PS-02 Appearance SL отш 0 ® Ф 0 Я) Ф о о ф о Ф о ® о ® о ® ® О п ЫМЛ-400 ° a I \ \ о ° 0 ° О 0 0 О ° О I• 1 I : I i: i i: i 1 1 11 1 1! • О i • о О • • и 1 1 1 1! I Ж 0 0 N Ш • О 1 1 1 II • и О о I «о «О • |S 3 ••>• •о с 3 о U О О 5 ш « щ&^± ^щщ^ т J I D I * CO., LTD. О С 3 О 1/1 "га с о REAR VIEW I Rack Type System connections (JSE - 174A) I i j ii SPEAKERS System connections (for DP TYPE ) FAN FIRE DETECTOR iEEEf rJ£ n •iu fljuBDfflintre; 4 i IU i toss ! ЯI I 9Ml Ш ЯП ДТП ДТП ЯГ1 gg~1 • i [ i t iE :Е ЕЕ :П .ЛИ1 J M JMI ЛЕИ 1 Д 1 Ш 1 Д 1 Д 1 Д i C€ S w 14 13 12 -и_па_яа_ав_ав_ав_ан-ав_ов. . C€ •ив HI ш i я ш i HI Hi til: ш №tB • II 17 1» It • 14 13 18 +24V ЕЕ EXTERMINAL BATTERY SPEAKERS Music Amplifier POWER-300A/600A/800A POWER AMPLIFIER FEATURES • HIGH EFFICIENT "к" type air flux design makes high efficient cooling. Air flux from right front and side to left front and side. •PROTECTION • Over heating protection SPECIFICATIONS •TECHNICAL & GENERAL Model Power 300A Output power Power 600A Power 800A 1kHz, 1%THD 80 stereo(RMS) 124W 198W 269W 4Q stereo(RMS) 189W 306W 412W 8Q bridge(RMS) 364W 600W 800W Input signal will be cut-off automatically when temperature of heat-sink is more than 10СГС • Speaker protection Designed amplifier bum sound to be minimized when power on/off. Output power 1kHz, 0 . 1 % THD 8Q stereo(RMS) 118W 189W 260W 4 a stereo(RMS) 181W 296W 392W 8Q bridge(RMS) 345W 566W 750W • Short protection When input signal is supplied under the out of work for speaker, short protection will be operating automatically. • Over current protection •Built-in over current protection to protect output transistor. • PEAK CLIPPING LIMITER CIRCUIT • POWER "ON" DELAY CIRCUIT(SOFT START) • BUILT IN BRIDGED MONO FUNCTION • b WAY BINDING POST AND SPEAKON CONNECTOR. Technical Specifications Frequency response(1W/8Q) 20Hz~20,000Hz, +0 / -0.5dB Voltage Gain(reference 1kHz) 36dB Input Sensitivity +4dBu(1.23V) / 30kohms Bal at 4ohms rated output power IMD-SAMPLE <0.09% 60Hz, 7kHz, RMS output power Signal to noise ratio >100dB A weighted, rms, to rated output level Damping factor >300 Slew rate >30V///s Cross talk at 80, load(A weighted) < 60dB(A weighted) 120V/220V/230V/240V/! kC 5O-60HZ Power Supply (Factory configured) Power Consumption 1/8 Power Curr. Draw 120W220-240W4Q Max Curr. Draw 120V/220-240V/4Q 3 I 635W 1047W 1398W 3.1A/1.55A 4.9A/2.45A 6.28A/3.14A 7.24A/3.62A 11.1A/5.57A 14.7A/7.33A Dimensions(mm) 483(W)X88(H)X370(D) (inch) 19.0(W)X3.5(H)X14.6(D) Weight(kg/lbs) 10.5/23.2 11.5/25.4 | 12.5/27.6 •D С 3 о (Л Ё ш Е £ о U •§ 1 I I t\ м л 11.__;:_ AC Power —I И B r - — I СНА ^ C H A •Я<Ф SPeaker 40 СНВ EFFECT Pro 8.2.2.4 EFFECT Pro 8.2.2.' JMA-300A/600A/900A POWER AMPLIFIER FEATURES SPECIFICATIONS • 2-step variable speed FAN. • Over current protection • Over heating protection • Load short circuit protection • Power delay on circuit(soft start) • XLR, 1/4" Phone jack(LINK) input connector. • 5-WAY binding post, speakon connector. • Ultra low distortion circuit. • Selective stereo, bridged mono. •TECHNICAL 8 GENERAL Input sensitivity Models Output Power into 8 ohms(RMS) into 4 ohms(RMS) into 8 ohms bridged(RMS) Output Power into 8 ohms(RMS) into 4 ohms(RMS) into 8 ohms bridged(RMS) Brigded mono at 8ohms Power requirement Frequency Response Signal to noise ratio("A"weighted) Power(option) Dimensions(mm) (inch) Weight(kg/lbs) TRIPAC 1.6VRMS(+4dB) JMA-300A JMA-600A JMA-900A (20-20,000Hz/THD=0.03%) 2X230W 2X110W 2X30OW 2X150W 2X350W 2X450W 1X300W 1X700W 1 X920W (1KHz/THD=0.1% 2X128W 2X250W 2X350W 2X175W 2X380W 2X490W 1X350W 1X760W 1X980W JMA-300A : 600W at 300W power output JMA-600A : 1160W at 630W power output JMA-900A : 1650W at 920W power output Less than -0.5dB(20Hz ~ 20kHz) More than 100dB(Each channel) AC 120V/220V/230V 50Hz 483(W)X 88(D) X 370(H) 19.0(W)X3.5(D)X 14.5(H) 11.2/24.7 14/30.9 14.4/31.7 I 8 . 4 . 4 . 2 ^ ^ ^ ^ ^ •g 8Q BRIDGED en© MONO(B/D) I STEREO ^ в ^ P ^ ^ ^ CH A AUTOMATIC VARIABLE SPEED FAN о 1Л I CHB AC Power I I Music Amplifier L1.0/L1.5/L2.2 PROFESSIONAL STEREO POWER AMPLIFIER FEATURES SPECIFICATIONS • Exceptional sound. Model • Efficient clipping limiter circuit. OUTPUT POWER • Special Low-Z circuit. • Ultra low distortion. • XLR, 1/4" TRS(LINK) balanced inputs. L1.0 L1.5 1KHz, 1 % THD L2.2 8 ohms Stereo(RMS) 170W 265W 360W 4 ohms Stereo(RMS) 270W 415W 560W 8 ohms Bridge(RMS) 540W 830W 1120W • Screw terminal & speakon connectors. OUTPUT POWER • Power-on delay (soft start). 8 ohms Stereo(RMS) 160W 250W 345W • Bridged mono. 4 ohms Stereo(RMS) 250W 385W 525W KHz, 0.1% THC • Variable speed fan. • Over current protection. TECHNICAL & GENERAL • Thermal protection. 20Hz ~ 20KHz +0/-0.5dB Frequency response at 4 ohms rated power +4dBu(1.23V)/15Kohmsbal Input Sensitivity/Impedance at 4 ohms rated power 10Vrms(+22dB) Input Clipping Signal to More Than 100dB Noise Ratio A Weighted 4 ohms reted power Damping Factor 8 ohms, f=1 kHz Greater Than 300 Slew Rate More Than 50V/^s More Than 65dB Cross Taik 8 ohms rated power 915W Power Consumption 1400W 1800W 4ohms rated power(1 % THD) 120V/220V/230V/240VAC 50/60HZ Power(option) 483(W)X 88(H) X 380(D) Dimensions(mm) 19(W)X 3.5(H) X 15(D) finch) Weight(kg/lbsj I 12.3/27 12/26.4 14.5/31.9 automatic Variable speed fan I 1 f" ©151 uu "• s) Г»™ fJ SSSSSSSSSSSSSS 1 a. •a с 3 о <л •(5 с о I s 42 a. Lift Ground TRIPAC 8.4.4.2 СН В MONO(B/D) STEREO СНА L-3.0X/3.6X/4.8X/6.0X PROFESSIONAL STEREO POWER AMPLIFIER WITH X-OVER SPECIFICATIONS FEATURES • New model L-series are high efficiency amplifiers with new special design. New L-series high power amplifiers make more efficient use of the AC power more than conventional amplifier technology. Also new EIC(Efficient Improved Circuit) engine consumes power efficiency, which allows the amplifier to produce the same amount of output power with about half the input power required and heat loss about 1/3 comparing that of conventional amplifiers. • The EIC engine outperforms other enfficiency-enhancing schemes without degarding sound quality by digital power supply. • Automatic variable speed fan • Over current protection • Over heating protection • Over load protection • In rush current protection • Peak clipping limiter circuit • Output LED meter per channel • Stereo bridged mono, parallel mode • Variable low cut filter(10Hz 200HZ) • Variable sub woofer OUTPUT POWER(W) filter(50Hz~ 160Hz) Value» shown are (or converted chip level* • Variable crossover(x-over) to within WOW baaed on actual measurement data tor each amplifier. filter(50Hz - 2.5Hz) Models L3.0X L3.6X Output Power L4.8X L6.0X 1 kHz, 1 % THD 8 ohms Stereo(RMS) 450W 580W 780W 940W 4 ohms Stereo(RMS) 700W 900W 1240W 1500W 8 ohms Bridged(RMS) 1400W 1800W 2480W 3000W Output Power IKHz, 0 . 1 % THD 8 ohms Stereo(RMS) 430W 550W 730W 900W 4 ohms Stereo(RMS) 660W 870W 1160W 1400W Technical Specificatons Frequency Response 20-20,000Hz +0/-0.5dB at 4ohms rated power Input Sensitivity / Impedance +4dBu(1.23V) / 30kohms bal at 4ohms rated power 10Vrms(+22dB) Input Clipping More Than 100dB Signal-to-Noise Ratio A weighted, rms, to rated output level Damping Factor Greater Than 300 8 ohms, f=1kHz Sub Woofer 50~160Hz-12dB/Octave Cross Over 50~2.5kHz -24dB/Octave Low Cut 10~200Hz-12dB/Octave Slew Rate More Than 50V/ys More Than 65dB Cross talk at 8 ohms rated power Power Consumption 4ohms rated power(1% THD) Power(option) Dimensions(mm) (inch) Weiqht(kq/lbs) 2070W 2620W 3480W 4210W 120V/220V/230V/240VAC, 50~60Hz 483(W)X 88(D) X 448(H) 19.0(W)X 3.5(D) X 17.6(H) 17/37.5 18.4/40.6 22/48.5 26/57.3 3 T3 о •о с 3 о 1/1 PARALLEL MONO(B/D) STEREO "s 'О SM-24 AUTOMATIC VARIABLE SPEED FAN HEAT-SINK • • • • • • • • •»•' ••' • • • 4Q Bridged I л' •1 (Л -1ч Y ti3 •о IJ^I СНА II ъ. 01 Е Е о и о I 1 Music Amplifier • • . : • • : : : , . : . - . . JFX-425 4 CHANNEL PROFESSIONAL POWER AMPLIFIER FEATURES SPECIFICATIONS • 4 x 250W rated power. OUTPUT POWER 8 ohms Stereo(RMS) 4 ohms Stereo(RMS) Bridge(RMS) 8 ohms Bridqe(RMS) OUTPUT POWER 8 ohms Stereo(RMS) 4 ohms Stereo(RMS) • Mono sub + stereo sattelite function (JFX-425) • 7 different setups possible. • Bridged & parallel mono mode. • Variable crossover 50Hz - 2,5 KHz (JFX-425). • Signal input by XLR & TRS Jack. • Peak clipping limiters. 1KHz, 1 % THD 165WX4 255WX4 500WX2 1 KHz, 0 . 1 % THD 150WX4 230WX4 TECHNICAL TECHNICAL & GEIMEF GENERAL Frequency response at 4ohms rated powi power Input Sensitivity/impi Sensitivity/Impedance at 4ohms rated powi power Input clipping Signal to Noise Rati Ratio A Weighted 4 ohms reted power Damping Factor 8 or ohms, f=1kHz Slew rate Cross Tnik 8ohms rated power Power consumption 4ohms rated power(1% THD) Power(option) Dimensio ns(mm) (inch) Weight • Over current protection. • Thermal protection. • Short circuit protection. • AC power-on soft start. C€ 20Hz ~ 20KHZ +0 / 0.5dB +4dBu(1.23V)/30KQ bal 10Vrms(+22dB) More than 100dB Greater than 300 More than 50V//is More than 65dB 1730W 120V/220V/230V/240VAC 50/60Hz 483(W)X 88(H) X 380(D) 19(W)X 3.5(H) X 15(D) 16.5/36.3 fUBffT^ • • i » дШ 1. Individual Inputs INPUT 1 VR 3. 2 IN, 2 CH Link AMP INPUT 8PK VR 5 . 1 IN, 2 CH Bridge AMP SPK °—ч£—C5F—аз '<^f-42F-p-°LO XSTEREO 1 X STEREO 2 Link lo Input 1 * 2 X STEREO X OUT X OUT - 3 2 IN, 2 CH Link - 2 X STEREO X OUT X °UT X SOLO X STEREO OUT X - 4 , 2 Bridge 1 4 2 IN, 2 CH 1111 • И i: • X -•-3.4 Bride* X SOLO X OUT X 5 1 IN, 2 CH t-rldg* X JL1.4 Bride* i X OUT X OUT x • 4 , 2 Br Ida* 6 2 C H X-OVER X X « ••- IN XOUT X X 7 2СНЭО X X X X - X gas м?т*ш APPLICATIONS • PA mixing in clubs, bars, churches or other small venues. • Rackmount submixer or keyboard mixer. • Home studios and small studios. • Live mixing and monitoring. • Multi-purpose stage mixer. • 4 AUX sends. • 4 stereo(8 mono) effects AUX returns. • Phantom 48V. • Group 1-4, L.R MIX, AUX send 1-4, Monitor L.R, outputs. • 3-band EQ with variable midrange frequency. • 4 stereo modules. • Peak to peak LED meters. • Internal power supply. • Talk back Mic. • High output headphone amplifier. • PFL function with individual signal metering. • 6-way/12-LED metering system. • 3-way configuration. • DC power tracking system.. SPECIFICATIONS Input / Mono Input / Stereo Output / Group Output / L • R Mix Frequency response any input to any output Total harmonic distortion line in to group or mix out Noise(20Hz~20kHz band width unweighted) Mic input equivalent input noise (150 й source) Mix noise(12ch routed) Crosstalk Mix to group output Input and output impedance Mic inputs(XLR) Hi-z and stereo inputs(1/4" jack) Insert points Aux output Group. Mix Input and output levels Mic input sensitivity(XLR) Line input sensitivity(1/4" jack) stereo input sensitivity(1/4" jack) Aux return(1/4" jack) lnsert(1/4"jack) Direct) 1/4" jack) Aux outputs(1/4" jack) Group. L • R Mix(XLR) Monitor output(1/4" jack) Power supply Weight(kg/lbs) Dimensions(mm) (inch) Tripac 8.4.4.2 8 / module 4 / module I 4/module 1 / module less than -0.5dB(20Hz~20kHz) less than 0,03% @1 kHz less than 0.04% @ 10kHz | less than-127dB less than-84dB | less than -68dB@ 1kHz | 1.8kQ balanced greater than 15kQ balanced 600 Q. 110k a unbalanced 600 Q unbalanced 600 Q, balanced | -20dB to -60dB(un pad) +20dB to -20dB(pad) -20dB to -60dB(un pad) +20dB to -20dB(pad) +20dB to -20dB +4dB -2dB nominal +2dB nominal +4dB for Ovu +4dB for Ovu OdB nominal 120V/230V/240VAC 50/60HZ 11.5/25.3 441X155X66 17.4X6.1X26 I 1 ! •§ I i 45 SM-16/24 PRO AUDIO MIXER APPLICATIONS • PA mixing in clubs, bars, churches or other large venues. • Audio / video applications. • Large and small studios. • Live sound recording and monitoring. • Multi-purpose stage mixer. • 4 AUX sends. • 4 stereo(8 mono) effects AUX returns. • Phantom 48V. (per 4ch). • Group 1 - 4, L.R MIX, AUX send 1-4, Monitor L-R, outputs. • 3-band EQ with variable midrange frequency. • 4 stereo modules. • Peak to peak LED meters. • Internal power supply. • Talk back Mic. • High-output headphone amplifier. • 6-way/12-LED metering system. • DC power tracking system. SPECIFICATIONS Input / Mono Input / Stereo Output / Group Output / Group Frequency response any input to any output Total harmonic distortion line in to group or mix out Noise(20Hz~20kHz band width unweighted) Mic input equivalent input noise (150 a source) Mix noise Crosstalk Mix to group output Input and output impedance Mir inputs(XLR) Hi-z and stereo inputs(1/4" jack) Insert points Aux output Group. Mix Input and output levels Mic input sensitivity(XLR) Line input sensitivity) 1/4" jack) 1 •D С 3 о (Л 15 I Ф £ Е о и I 1 о. тз с 3 а 45 с ,о 'К S ч46 О а. stereo input sensitivity(1/4" jack) Auxreturn(1/4"jack) lnsert(1/4" jack) Direct(1/4" jack) Aux outputs(1/4" jack) Group. L R Mix(XLR) Monitor output(1/4" jack) Power supply Weight(kg/lbs) Dimensions(mm) (W X D X H)(inch) SM-16 12 /module 4 / module 4 / module 1 / module SM-24 20 / module 4 / module 4 / module 1 / module less than -0.5dB(20Hz~20kHz) less than 0,03% @1 kHz less than 0.04% @10kHz less than-127dB less than -83dB less than-68dB@1 kHz 1.8k ffi balanced greater than 15kfi balanced 600ffi/l0k& unbalanced 600 Q. unbalanced 600.0, balanced -20dB to -60dB(un pad) +20dB to -20dB(pad) -20dB to -60dB(un pad) +20dB to -20dB(pad) +20dB to -20dB +4dB -2dB nominal +2dB nominal +4dB for Ovu +4dB for Ovu OdB nominal 120V/230V/240VAC 50/60HZ 19.5/43.0 25.5/56.1 610X680X130 810X680X130 32X27X5 24X27X5 PL-1082DP 10СН 800W STEREO POWERED MIXER FEATURES • Huge Dual 400 watt Power Amps(Left/Right or Main/Monitor) • 10 Channels(6 Mono/4 Stereo)-8 XLR/Line Level and Channel 7/8, 9/10 are Stereo Line or Mono Mic • Each Channel Offers : Adjustable Input gain with Peak LED, 3 Band EQ, EFX Send, Monitor Send, Stereo Pan, PFL(Pre Fader Listen), 60min Slide Fader Control. • Dual 7 Band Master Equalization for Left/Right or Main/Monitor • Stereo Digital Multi Effects with 16 Programs with Adjustable Parameters • Effects Routing to Aux.1 or Aux.2 • Effects Cancel Foot Switch Jack • Three Master Faders(Left, Right / Main, Monitor) • Headphone Output with Level Control • CD/Tape Input and Record Output with Level Control • Aux. Input with Level Control • Aux.1 6 Aux.2 Stereo Inputs • Balanced Stereo L/R and Monitor Outputs • Unbalanced Effects Output • Multi-segment LED Output Display • Internal Thermal Protection Circuitry • High-efficiency Fan Cooling for Real World 2ohm Operation • Rack-mount Kit included • Left/Right/Main/Monitor Speaker Outputs Section MIXER Item Number of Channel Frequency Response T.H.D. Equiv. Input Noise Channel Cross Talk Channel EQ (3-band) Master EQ (dual 7-band) Input Sensitivity Output Level Щшшшшшшшшшяш Power Amp DSP RMS Power Output (1KHz,@0.25% T.H.D.) Frequency Response S/N Ratio Channel Seperation Power Source Primary Fuse Rating Power Consumption Others Net Weight Dimensions (WXHXD) Value / Ratinq Mic / Line / Insert 6 Mono, 4 Stereo 20Hz -20KHz ±1dB 20Hz -20KHz 0.03% -105dB -50dBm Mic Input 150 ohm with DIN Audio Filter 1 KHz, Gain Pot Main -100dB High 12KHz±15dB Middle 2.5KHz±12dB Low 80Hz + 15dB 125Hz, 250Hz, 500Hz, 1KHz, 2.5KHZ, 5KHz, 12KHz Mic -8dBm to -55dBm Line +14dBu to -30dBu Insert OdB normal Tape in -10dB Rec Out +4dB +4dB Aux Return 1 & 2 Stereo Mix Out +4dB +4dB Monitor Out +4dB Effect Send 8 Reverbs, 8 Delays 16 Presets 8ohm 250W + 250W 4ohm 320W + 320W 2ohm 400W + 400W 10Hz-20KHz +0/-1dB less than 100dB 80dB 8ohm AC 120V / 60Hz, AC 230V, 240V / 50Hz AC120V/60HZ 125V/F13.0A AC 230V, AC 240V / 50Hz 250V/T8.0A AC120V/60HZ 1600W 1520W AC 230V, AC 240V / 50Hz Kq / lbs 20/44.09 mm 483X350X175 Inch 19.0X13.8X7.8 •o с 3 о 1Л 01 E E о u з •a о I 1 ! 47 Audio Mixer i^HBB EFFECT PRO 8 AUDIO MIXER APPLICATIONS • 8 mono channels, 2 stereo channels. • Master L/R, Aux 1, 2 recording L/R, EQ Master L/R output. • 3 band EQ. per channel. • Phantom 48V. • Optional two effects (digital echo, DSP). • 7 band graphic EQ on master output. SPECIFICATIONS Input Output Frequency response Any input to any output Total harmonic distortion line in to mix out Noise (20Hz~20kHz band width unweighted) Mic input equivalent input noise(150ffi source) Mix noise(1 Och routed) Crosstalk Mix L/R output Input and output impedance Mic inputs(XLR) Hi-z and stereo inputs(1/4" jack) Insert points Aux output Mix output Input and output levels Mic input sensitivity(XLR) Line input sensitivity(1/4" jack) I i i I I 1 48 Stereo input sensitivity(1/4" jack) Aux return(1/4" jack) lnsert(1/4" jack) Aux outputs(1/4" jack) Mix outputs EQ Mix outputs Recording output(1/4" jack) Power supply Dimensions(mm) (inch) Mono 8 / Stereo 2 module RTN/REC out. EQ MIX L-R Mix L-R/Aux send 2, stereo less than -0.5dB(20Hz~20kHz) less than 0,03% @1 kHz less than 0.04% @10kHz less than -127dB less than -84dB less than -68dB@1kHz 1.8kQ balanced greater than 15k& balanced 600 & / lOkffi unbalanced 600 Q. unbalanced 600 0. balanced -20dB to -60dB(un pad) +20dB to -20dB(pad) -20dB to -60dB(un pad) +20dB to -20dB(pad) +20dB to -20dB +4dB -2dB nominal +4dB +4dB for Ovu +4dB for Ovu OdB nominal 120V/230V/240VAC 50/60HZ 494(W)X105(H)X470(D) 19.4(W)X4.13(H)X18.5(D) PL-8302DP/PL-8502DP 8СН STEREO POWERED MIXER FEATURES • Big 150W + 150W(PL-8302DP), Huge 250W + 250W(PL-8502DP) Dual High-Power Amps • 8 Channels with XLR Mic & 1/4" Line Inputs, 3Band EQ, EFX Level, • 5 Segment LED Output Indicator • Master Controls : Left Master Volume, Right Master Volume, Effect Monitor Level, Channel Level, PAD Switch • Stereo Digital Effects with 16 Programs Master Volume, Main Master Volume, Monitor Out Volume, EFX • Dual 7 band Master Graphic Equalization Send/Return Volume, Tape In Volume, Aux In Volume • EFX Send/Return Jacks • Internal Thermal Protection Circuitry • System Mode Switch for L/R, Main/Monitor, Bridged Mono • Tape In and Record Out Jacks • Aux In Jacks Configuration • Forced cooling fan • 48 Volt Phatom Power for Condenser Mies SPECIFICATIONS Section MIXER Number of Channel Frequency Response T.H.D. Residual Noise Channel Cross Talk Channel EQ (3-band) Master EQ Input Sensitivity Output Level ы< DSP H Power Amp RMS Power Output (1KHz,@0.25% T.H.D.) Frequency Response S/N Ratio Channel Seperation Power Source Primary Fuse Rating Power Consumption Others Value / Ratinq PL-8302DP PL-8502DP Mic / Line 8 8 20Hz -20KHz +1.5dB + 1.5dB 20Hz -20KHz 0.1% 0.1% -80dB 20Hz -20KHz -80dB -80dB 1KHz -80dB High 12KHz+15dB 12KHz±15dB Middle 2.5KhzM2dB 2.5Khz±12dB Low 80Hz * l5dB 80Hz+15dB Dual 7-band 60Hz, 160Hz, 400Hz, 1KHz, 60Hz, 160Hz, 400Hz, 1KHz, 2.5KHZ, 6.4KHz, 16KHz ! 12dB 2.5KHZ, 6.4KHz, 16KHz ! 12dB -SOdBm -SOdBm Mic Line -20dBm -20dBm Tape in -10dBm -10dBm Auxin -10dBm -10dBm -10dBm -10dBm Effect Return Effect Send +4dB +4dB +4dB Mix Out +4dB Monitor Out +4dB +4dB +4dB +4dB Rec Out Hall Reverb 1,2 Hall Reverb 1,2 16 Presets Room Reverb 1, 2 Room Reverb 1, 2 PlateReverb1,2 PlateReverb1,2 Reverb + Delay 1, 2 Reverb + Delay 1, 2 Feedback delay 1,2,3 & 4 Feedback delay 1,2,3 & 4 Reverb + Chorus 1, 2 Reverb + Chorus 1, 2 ^Иш^И^^Щ^ЩЩЩ Reverb + Flanqe 1, 2 Reverb + Flanqe 1, 2 8 ohm 100W+100W 175W+175W 4 ohm 150W+150W 250W + 250W Bridged 8 ohm 300W Mono 500W Mono 20Hz -20KHz +0/-1dB +0/-1dB 90dB 90dB 90dB 90dB 8ohm AC 1 0 0 V / ' 0Hz, AC 120V / 60Hz, AC 230V, 24 0V/50HZ AC 100V/50HZ, AC 120V/60HZ 250V/T4.0A 250V/T6.3A AC 230V, AC 240V / 50Hz 250V / T 3.15A 250V/T5.0A AC 100V/50HZ, AC 120V/60HZ 550W 900W AC 230V, AC 240V /50Hz 550W 900W Kq / lbs 18.0/39.6 18.0/39.6 mm 475 X 300 X 285 475 X 300 X 285 Inch 18.7X12.3X11.2 18.7X12.3X11.2 Item Net Weiqht Dimensions (WXHXD) 3 1 o. ? 3 о (Л 15 '£ £ E о u 1 I I 49 Speaker & Others JDN-132B DIVIDING NETWORK FEATURES SPECIFICATIONS • High efficency electronic balanced circuit capable of eliminating the exterior static induced to the signal line is adopted. • Low frequency summed (subwoofer) output. • X10 range switch on both channels Technical Input Sensitivity / Impedance Output Level / Impedance Frequency Respones Crossover Signal to Nose ratio T.H.D Power Consumption Power Dimensions Weight 1 1 1 1 1 1 0dBu(0.775V) /20kQBAL OdBu(0.775V)/200,y,BAL -0.5dB (20Hz~20KHz) 45Hz~9.6KHz (24dB/oct) More Than 92dB Less than 0.01% MAX3.7W AC 100 - 240V~,50/60Hz 483(W) x 44(H) x 200(D) mm 19(W)x 1.7(H) x 7.8(D) inch 2.47Kg / 5.44lbs JRC-015B/021B/027B/033B/036B/039B Rack Cabinet JRC-015B JRC-021B JRC-027B JRC-033B JRC-036B JRC-039B W 600mm 600mm 600mm 600mm 600mm 600mm 870mm 1100mm 1400mm 1670mm 1800mm 1940mm 650mm 650mm 650mm 650mm 650mm 650mm С э о £ •a с 3 1 2 E E о и g 3 •и с 3 о 1/1 ! 50 JRC-015B TIRC-039B шшж; JCO-110/120/130/140/160 Column Speaker JCO-160 JCO-140 JCO-110S/120S/130S/140S/160S Column Speaker WITHOUT TWEETER JCO-130 FEATURES • You can select impedance by rotary selector on the front. • Built-in one tweeter for clear sound. • Fantasitc design. • White color. •\^Spec. Model Impedance 1Kohm JCO-110 JCO-140 JCO-160 70V 50V 10W 5W 2.5W 2.5Kohm 4W 2W 1W 6.6Kohm 1.5W 0.75W 0.38W 500ohm 20W 10W 5W 1Kohm 10W 5W 2.5W 2Kohm 5W 2.5W 1.3W 333ohm 30W 15W 7.5W 666ohm 15W 7.5W 3.8W 1.3Kohm 7.5W 3.8W 1.9W 250ohm 40W 20W 10W 500ohm 20W 10W 5W 1Kohm 10W 5W 2.5W JCO-120 JCO-130 S.P.L.(at1M/1W + 3dB Power 100V or Out Power) Loud speaker Size(mm) WXHXD Weight Direct 8ohm 4 inch X 1 88-101dB 90X260X85 2kg 10W 90X360X85 2.5kg 20W 90X470X85 3.5kg 30W 90X560X85 4kg 40W 90X760X85 5.5kg 60W 2 inch X 1 4 inch X 2 89-103dB 2 inch X 1 4 inch X 3 90-104dB 2 inch X 1 166ohm 60W 30W 15W 250ohm 40W 20W 10W 333ohm 30W 15W 7.5W 4 inch X 4 92-106dB 2 inch X 1 4 inch X 6 94-107dB 2 inch X 1 JCO-110A/120A/130A/140A/160A Column Speaker "8 FEATURES • You can select impedance by rotary selector on the front. JCO-140A • Built-in one tweeter for clear sound. • Fantasitc design. -o с 3 о l/l !ш С ф SPECIFICATIONS Model JCO-110A JCO-120A JCO-130A JCO-140A Driver 5"70 5" 70 5" 70 5" 70 Power(r.m.s/max) 10W 20W 30W 40W Fequency Range Impedance Sensitivity Dimension Net Weight Material 200Hz~14kHz 200Hz~14kHz 200Hz~14kHz 200Hz~14kHz Black COM COM COM COM Gree/100V 1k 500 333 250 White / 70V 490 245 163 122 95dB+ 2dB 98dB+ 2dB 100dB+2dB 103dB+2dB 155X230X130 155X370X130 155X510X130 155X610X130 1.7kg 2.5kg 3.5kg ABS resin 4.5kg Е £ о и 3 -а о •о с 3 о (Л 75 с о Speaker & Others JCS-405/605/610 Ceiling Speaker JCS-605 JCS-405 JCS-610 SPECIFICATIONS JCS-405 JCS-605 BW 5W 10W 50Hz-16Hz 70Hz~10kHz 70Hz~10kHz Input(rms) Frequency response S.P.L Dimensions(WxHxD) JCS-610 94dB 96dB lOOdB 303X303X85 0231X96 0231X96 Weight(kg/lbs) 2.5/5.5 2/4.4 2/4.4 ABS Aluminum Aluminum Materials JWS-103W/110W/205 Wall Speaker JWS-103W JWS-110W I JWS-205 •o с I SPECIFICATIONS Model System Type •§ Input I Impedance Freguency response I £ S.P.L Dimensions JWS-103W JWS-110W 6 1/2" 6 1/2" - 3W 10W 3W 130Hz~12KHz 110Hz~15KHz - - 200Hz~16KHz Common(black) 2KQ 91dB±2dB 93dB±2dB - - Weight 1.8kg 1.8kg Material ABS resin ABS resin JWS-205 98dB L 295X93/72 X 21 Own 1.8kg MICROPHONE STANDS MS770 MICROPHONE STANDS Setup Height: 900-1900 Setup Height: 1000 Weght: 6.8kg MS767 MICROPHONE STANDS Setup Height: 800-1800 Setup Height: 800 Weght: 3.2kg MS757 MICROPHONE STANDS Setup Height: 1000-1800 Weght: 2.2kg t MSH2 MICROPHONE STAND HOLDER MG30 Goose Neck Size : 270mm 1 •o e .2 у ! ? MSB50 MICROPHONE ROUND BASE Diameter: 0220mm Weight: 0.9Kg I I I 53 www.jedia.com 2004 ~2005 Catalogue Professional Sound Products Commercial Sound Products 2**11 nil " -^tiift шпкщш iii III iii шш нш #»' JEDIA CO., LTD. OVERSEAS SALES 608, Hwa San-Ri, I Dong-Myeon, Yong In Kyung Gi-Do, Republic of Korea. ZIP CODE : 449-832 Tel:+82-31-335-7064 / Fax:+82-31-335-1911 web site:www.jedia.com E-mail:[email protected] ГУ РосНИИИТ и АП Ассоциация МВТК Федеральный информационный фонд отечественных и иностранных каталогов на промышленную продукцию Каталог был представлен на выставке «MIPS - 12-я Международная выставка Охрана, безопасность и противопожарная защита - 2006 » Каталог включен в базу данных «Федерального информационного фонда отечественных и иностранных каталогов на промышленную продукцию» Россия,105679, Москва, Измайловское шоссе, 44, Тел./факс (095)366-5200,366-7008, 365-5445. e-mail:; fkatalog(a)mail.ru, www.ffpk.ru Электронная копия издания изготовлена с целью её включения в базы данных Федерального информационного фонда отечественных и иностранных каталогов на промышленную продукцию, которые формируются в соответствии с Постановлением Правительства РФ от 24 июля 1997 г. № 950 и Постановлением Правительства РФ от 31 декабря 1999 г. № 2172-р и зарегистрированы Комитетом по политике информатизации при Президенте РФ под №№ 39-50. 2006 год