Transcript
Plastering machines, screed pumps and fine concrete pumps
Catalogue 2011/2012
MM 2599/11 GB
Our catalogue as an aid to work This year‘s complete catalogue of more than 136 pages will show you the complete range at Putzmeister Mörtelmaschinen GmbH. Here you will find all our products: floor screed pumps, plastering machines, small fine concrete pumps and of course all the right accessories.
Easy to search for, easy to find Every machine chapter starts with a practical summary table. Here we guide you from the application to the right machine. So you will know which machine/accessories is the right one for you. Each machine is described in detail, with all its important technical data. Here we ask you to note that we have to reserve the right to make technical changes, and also that the performance details are guideline figures and are therefore subject to alteration. We also show you the accessories applicable in each case, so that you always have a complete overview. Technical data may be changed without prior notice.
Please note:
Caveat:
We are grateful for ideas and suggestions on how we can improve the way we design the catalogue even better in the future. Simply write to:
We reserve the right to increase the number of DIN parts and tools per order to minimize the internal costs of storage and packaging.
Putzmeister Mörtelmaschinen GmbH Subject “Catalogue” Max-Eyth-Straße 10 D-72631 Aichtal · Germany
For a safe and correct operation of the machine please refer to the appropriate operating manual.
And if you want to know more about us, just get in touch: Telephone +49 (0) 71 27 5 99-0 Or pay us a visit on the Internet: www.mortarmachines.com Issue: January 2011
MM 2599/11 GB
2
Table of Contents General overview Overview Trans Mix
4-9
10 - 11
Screed pump application overview
12 - 13
Accessories for screed pumps
79 - 89
Accessories for fine concrete pumps
90 - 95
Accessories for plastering machines
96 - 127
Self levelling screed pumps SP 11 SP 20
14 - 15 16 - 17
Pneumatic conveyor M 730 M 740 M 760 Suggested accessories for pneumatic conveyors
Fine concrete pump application overview
18 - 19 20 - 21 22 - 23 24 - 25 26 - 27
Fine concrete pumps P 715 Suggested accessories for P 715 P 718 Suggested accessories for P 718
Plastering machine application overview
28 - 29 30 - 33 34 - 35 36 - 39 40 - 41
Mixer pumps MP 10 / MP 12 MP 25 MIXIT / MP 25 FMP 60 Suggested accessories for MP 25
42 - 43 44 - 45 46 - 49
General accessories
128 - 129
We are there for you
130 - 131
Conveying systems FA 420 / FAT 420
50 - 51
Mortar spraying systems Sprayboy P 12 Suggested accessories for Sprayboy P 12 Strobot 406 S Suggested accessories for Strobot 406 S S 5 Suggested accessories for S 5 CM 528-20 SP 11 Beliso series Suggested accessories for SP 11 Beliso series P 13 KA 230 Suggested accessories for P 13
52 - 53 54 - 55 56 - 57 58 - 61 62 - 63 64 - 67 68 - 69 70 - 73 74 - 75 76 - 77 78
Conditions of sale and delivery
3
132 - 133
MM 2599/11 GB
Welcome to Putzmeister... …in Aichtal, near Stuttgart. This is where our headquarter is located – but our ideas for technical solutions are formulated on construction sites. That's where it's all about making work easier and more efficient. Whether you're working with mortar, screed or fine concrete, we can help with mixing, pumping, application, and spraying tasks. Practical innovations have made us great. And our machines are used throughout the world.
Putzmeister Mörtelmaschinen GmbH develops, produces, and delivers one of the world's most extensive ranges of powerful, site-optimised plastering machines and screed conveyors as well as professional Dynajet high-pressure cleaners. As a wholly-owned subsidiary of the Putzmeister Group, we are able to offer you, our customers and sales partners, ideal conditions when it comes to expertise, investment security and optimum service in all sectors.
The Putzmeister Group We form part of the globally active Putzmeister group. With several subsidiaries throughout the world, the Putzmeister Group is represented on all global markets and is a real international player. Our main focuses are on the manufacture of machines for the distribution of concrete, mortar, and high-density substances. In this way, companies of the Putzmeister group are active in business segments in many different areas:
Concrete pumps Plant engineering Tunnelling machinery Large robot technology Mortar machines High-pressure cleaners
Putzmeister building, administration of the Putzmeister Mörtelmaschinen GmbH
The Putzmeister group: at home all over the world
Aichtal: 21,500 m² of space for producing excellent Putzmeister quality
MM 2599/11 GB
4
Quality “Made in Germany” Extremely modern production facilities in Aichtal
A total of 9000 m2 of space is available for the production of
The new assembly hall makes use of a line production system which is linked to numerous throughput stations.
Putzmeister mortar machines in Aichtal.
The production plant in Aichtal near Stuttgart offers 9000 m2 of extremely modern facilities for the production of compressed air conveyors, mixing pumps, piston pumps, worm pumps, and the entire professional highpressure cleaning range of the Dynajet brand. All work steps are standardised and guarantee consistently great quality with regard to processing and the performance of the finished products. Our pressure vessels are welded at our own works using precise robotics and are then thoroughly checked using ultrasound methods.
Quality Assurance Our quality management measures start with the vitally important selection of ISO-certified suppliers and continue with the regular checking of these suppliers. Each machine is started up and tested immediately after assembly. If the test is successful, it is sent on for a final inspection.
Quality guarantee: Our machines only use parts which have passed the most stringent quality controls and in-depth
During the final production inspection, each machine is optimally adjusted one last time. We test our machines in continuous operation, checking all functions such as safety devices. In this way, we ensure that you receive a reliable Putzmeister product in perfect condition.
testing.
Technology with more value
Finishing: Not one single machine leaves our production hall without being
However, sophisticated technology isn't everything: In addition, we try to make sure that our contact with customers, sales partners, and suppliers is pleasant and beneficial for both sides.
subjected to a thorough final inspection and careful cleaning.
Area-wide network of competent and helpful sales partners Good quality, comprehensible technical documents A willingness to listen to questions or problems Fast, uncomplicated order processing Quick delivery times for machines and replacements/wearing parts
Investing for the future
Friendly and competent employees Fair pricing
We also want to meet both our and your expectations in the future. This is why we continuously invest in qualified and committed employees. Excellent quality is simply not possible without them. We consistently continue to back the latest computerised plants and technology. Without them, it simply would not be possible to develop and manufacture top-quality products and to deliver them without faults. We also intensively cultivate contacts with our customers, suppliers and sales partners throughout the world.
5
MM 2599/11 GB
In operation anywhere and at any time ... Putzmeister Mörtelmaschinen GmbH is pleased to present one of its most extensive ranges of machines: from the versatile plastering machines, such as our mixer and worm pumps, to state-of-the-art floor screed conveyors and beyond to our sturdy fine concrete piston pump. We can provide you with the right machine and suitable accessories for virtually all applications.
Floor screed pumps for self levelling floor screed and traditional cement screed, for mixing and conveying materials like sand and gravel to pourable and fine concrete
Some of the illustrations show snapshots which do not always comply with the regulations of the Industrial Employers' Liability Insurance Association.
MM 2599/11 GB
6
... worldwide Fine concrete pumps for pumping anhydrite, cement and cementite self levelling floor screed, shotcrete, as well as fine concrete with up to 32 mm granulation
7
MM 2599/11 GB
In operation anywhere and at any time ... Plastering machines for plaster made from sand, lime and cement, as well as mortar, available in different versions and performance levels for various applications within the civil engineering and construction industries
Some of the illustrations show snapshots which do not always comply with the regulations of the Industrial Employers' Liability Insurance Association.
MM 2599/11 GB
8
... worldwide
9
MM 2599/11 GB
Trans Mix ...
Fully automatic mixing and conveying - easy and universal
Trans Mix systems are mobile mixing and delivery systems for making and conveying liquid screed, traditional cement screed, anhydride screed, and lightweight concrete. All necessary materials such as water, sand, binder, polystyrene insulation, fibres, and liquid concrete additives are stored on board in special repositories. They are automatically metered, mixed, and conveyed in the Trans Mix as required at the construction site.
Optimum convenience and versatility
Mobile Trans Mix systems have numerous advantages which are not easy to find in other systems:
12 variants for the highest possible degree of flexibility
A tilt system is used for the Trans Mix 3200 and 5500. The multiple chamber silo facility is hydraulically propped and moved into the mixing chamber using a screw conveyor. The material then falls down to the pump in the conveying container. Alternatively, the Trans Mix 400 and 500 models works with integrated delivery units which transport the material within the plant without tilting.
n All materials can be carried on board n Very short setup times at the construction site n Completely automatic metering and mixing of material to be conveyed n Low processing time for material of higher quality n Recipes for automatic mixes can be stored in the system n Consistent mixes n Significantly higher output n No residue; the Trans Mix simply carries it off again
The Trans Mix 3200 and 5500 systems are tilting systems. They differ in the pump system used and are each available in 2 variants: n The 3200FE uses a worm pump to convey liquid screed. n The 5500ZE uses a compressed air conveyor to convey cement screed.
n Reduced costs thanks to cost-effective purchase of raw materials n Lower personnel requirements: Can be operated by a single person n Tailored, easy billing using machine software
In addition, the semi-trailer versions of the 3200 and 5500 are each available as an “ST” variant for polystyrene insulation.
Semi-trailer or 8x4 truck system
The Trans Mix 400 and 500 models do not tilt. Instead, they have integrated delivery units. They can be fitted with three different pump systems: n A FE version, with a worm pump for conveying liquid screed n A ZE version, with a compressed air conveyor for processing cement screed n A LB version, with a piston and worm pump for conveying lightweight concrete
Nearly all Trans Mix systems are available either as a semi-trailer for your own tractor unit or as an 8x4 truck system with 4 driven wheels. The latter variant is particularly suitable for cramped construction sites. The Trans Mix semi-trailers do not require a truck unit, but can be operated on their own.
MM 2599/11 GB
10
... the “screed factory on wheels” The right Trans Mix system for every application For detailed information on all Trans Mix models, see www.transmix.de
Whatever you need, you will find the right “conveying factory” for your needs from amongst our numerous Trans Mix models. Here are some of the possible configurations:
The Trans Mix 8x4 versions are especially suited for urban work due to their smaller wheelbase.
A liquid screed specialist thanks to a powerful worm pump: The Trans Mix 3200FE.
A fully automatic mixing process guarantees consistent quality with exact metering and weighing.
No shortages, no residue – the Trans Mix 5500 carries everything you need for on-site work along with it and takes away anything that's left over.
Thanks to the large loading capacities, the semi-trailer version Trans Mix 500 and the 8x4 version Trans Mix 400 are particularly versatile. And, because they have an integrated delivery system, they can be used in places where tipping is not possible.
11
The semi-trailer versions are completely functional without a truck unit.
One person can load the Trans Mix system.
MM 2599/11 GB
www.mortarmachines.com
Machines for floor screed, gravel, sand or concrete conveying For small or large construction sites, for fine or coarse materials, for short or long delivery distances: Putzmeister machines achieve performance and alleviate the work. Note: Always use a machine-compatible mortar in combination with machine technology. If you have any questions, please contact the material manufacturer or contact us directly.
– Ideal
Conventional floor screed
Not suitable
Conditional
Dry mixed mortar grain up to 8 mm
Construction site mix grain up to 16 mm
Pneumatic conveyors M 730 M 740 Pages 18-25 M 760
MM 2599/11 GB
Mixer pumps MP 25
Pages 42-49
–
–
Conveying units FA 420 / FAT 420
Pages 50-51
–
–
Worm pumps S5
Pages 62-67
–
–
SP 11 BHF/ SP 20 DHF
Pages 12-15
–
–
SP 11 BMR / BMB / BMT SP 11 BUR / BBR
Pages 70-75
–
–
–
–
–
–
Piston pumps P 715 P 718
Pages 28-39
P 13 KA 230
Pages 76-78
12
Application overview floor screed pumps
www.mortarmachines.com
Self levelling floor screed Dry mixed mortar grain up to 4 mm
Ready mixed mortar grain up to 8 mm
Construction site mix grain up to 8 mm
–
–
–
–
–
–
–
–
–
–
13
MM 2599/11 GB
Worm pumps
www.mortarmachines.com
Worm Pump SP 11 BHF The machine for self levelling floor screed from truck-mixer and continuous mixer
SP 11 BHF – Comfort
The lightweight SP 11 BHF is compact, manoeuvrable and powerful yet quiet during operation. It is the worm pump for floor screed professionals.
The SP 11 BHF Comfort is the same as the SP 11 BHF, but with remote control for convenient delivery rate regulation and switching the machine on and off.
Suitable for pumping material with 0-8 mm grain size, e.g. self leveling anhydrite floor screed and cement floor screed, etc. A truck mixer or other external mixers supply the machine with wet mixes.
Part no. 111 505.420
SP 11 BHF
Supplementary equipment
n Large hopper n Powerful diesel engine
n Hydraulically driven reversible worm pump
n Infinitely variable delivery rate
n Modern, hard-wearing plastic hood
n Simple operation via cable remote control or directly at the
control console n PLC control n High pressure water cleaner n Safety grid screen with 15 mm opening and 12 volt vibrator
Standard equipment: pressure gauge in pressure connection, operating instructions, spare parts list, standard tools, 60 m remote control cable on cable drum, ball hitch
Part no. 211 845.009 498 231 524 209 213 326.005 212 154.003 445 484 437 116
Suggested accessories for self levelling floor screed:
Part no. 111 505.440
MM 2599/11 GB
Part Radio remote control on / off Radio remote control with output regulation Grid screen MW 10 Torque arm for stator DIN trailer coupling ring (truck) brakeless Vibrator 12 V DC Working light
14
2x 5x 5x 1x 1x 1x 1x
Part Delivery hose ID 50, V50, M50 20m Sponge rupper ball ID 50 Sealing ring ID 50 PM pumping aid, 18 l in storage tank, 25 pcs Hose holder made of leather Levelling tripod, standard (12 cm) Levelling tripod, high (14 cm)
Part no. 501 915 000 212.005 213 266.000 266 743.004 000.206.008 211.703.002 211.704.001
Fig. 1 2 3
Self levelling floor screed pumps
www.mortarmachines.com
You can control all machine functions conveniently from the central control panel.
Technical data
A modern diesel engine with integrated hydraulic system supplies the SP 11 with sufficient power at all speeds.
SP 11 BHF
The powerful, low-wearing worm pump 2L75.
SP 11 BHF
Special feature Basic version Comfort Machine model hydraulic worm pump Pump worm pump 2L75 Theor. delivery rate* 0-15 m3/h 0-15 m3/h Delivery pressure 20 bar 20 bar Drive motor 4-cylinder-Kubota diesel engine, 22.7 kW at 2,600 rpm Chassis without brakes Hopper volume 220 l 220 l Support load 30 kg 30 kg Weight 740 kg 740 kg Length 3,210 mm without tow-bar 3,210 mm without tow-bar 3,519 mm with tow-bar 3,519 mm with tow-bar Width 1,420 mm 1,420 mm Height 1,150 mm 1,150 mm Filling height 600 mm 600 mm Maximum grain size 8 mm 8 mm Discharge connection M 50 M 50 Part no. 111 505.440 111 505.420 * The delivery rate depends on the rotor / stator, pump speed (rpm) and pumping media. The delivery rate may be higher or lower.
Further information is available in brochure MM 3968. For additional accessories see page 96.
15
MM 2599/11 GB
www.mortarmachines.com
Worm pumps
Worm Pump SP 20 DHF Unbeatable in pump performance and low in wear
Supplementary equipment
A professional self levelling floor screed worm pump. Hydraulically driven with an infinitely adjustable pumping rate up to 18 m3/h, it is the worm pump for the self levelling floor screed professional – compact, powerful and soundproofed.
Grains up to 8 mm, even over-size up to 12 mm are no problem for this pump, e.g. anhydrite, cementrite, cement self levelling floor screed etc. The SP 20 should only be fed by truck-mixers.
SP 20 DHF
n Worm pump with hydraulic pump drive
n Reversible worm pump 7515 or 2L8
n Infinitely variable delivery rate, even from the hose end
n Infinitely variable mixer speed
n Storage space for spare worm pump n Storage space for tools n Large hopper
Tilting sieve insert with 15 mm opening
Standard equipment: pressure-gauge in pressure connection, operating instructions, spare parts list, standard tools, overrun braking device with ball hitch, radio remote control. Part no. H 872 044.100 Part no. H 872 044.120
MM 2599/11 GB
Part no. H 872 040 9010 H 317 711 0317 H 317 711 0324 H 872 020 1290 H 872 040 0310 H 317 711 0362 H 872 020 1300
Suggested accessories for self levelling floor screed:
n Powerful engine
n
Part Electric vibrator placed outside the material hopper Signalling device on the machine, horn (only with radio remote control) Signalling device on the machine, indicator lamp Cable drum with remote control Diesel particle filter Battery for radio transmitter Connecting adapter with pressure gauge
16
2x 5x 5x 1x 1x 1x 1x
Part Delivery hose ID 50, V50, M50 20m Sponge rupper ball ID 50 Sealing ID 50 PM pumping aid, 18 l in storage tank, 25 pcs Hose holder made of leather Levelling tripod, standard (12 cm) Levelling tripod, high (14 cm)
Part no. 501 915 000 212.005 213 266.000 266 743.004 000.206.008 211.703.002 211.704.001
Fig. 1 2 3
Self levelling floor screed pumps
www.mortarmachines.com
You can operate the SP 20 cpl. from one side, or using the convenient radio remote control.
The diesel engine with an impressive output of 32.8 kW.
Technical data
SP 20 DHF
Machine model Pump Theor. delivery rate* Delivery pressure Drive motor Chassis Hopper volume Support load Weight Length Width Height Filling height Maximum grain size Discharge connection Part no.
hydraulic worm pump worm pump 7515 worm pump 2L8 3 15 m /h 18 m3/h 35 bar 25 bar 3-cylinder diesel engine, Deutz, 32.8 kW at 2,600 rpm robust T-chassis, with brakes 250 l 250 l 45 kg 45 kg 960 kg 960 kg 4,200 mm with tow-bar 4,200 mm with tow-bar 1,300 mm 1,300 mm 1,280 mm 1,280 mm 1,000 mm 1,000 mm 8 mm 12 mm V 50 V 50 H 872 044.100 H 872 044.120
The new wear-resistant worm pumps, type 2L8.
SP 20 DHF
* The delivery rate depends on the rotor / stator, pump speed (rpm) and pumping media. The delivery rate may be higher or lower.
Further information is available in brochure MM 3653. For additional accessories see page 96.
17
MM 2599/11 GB
Pneumatic conveyors
www.mortarmachines.com
Mixokret M 730 DH, M 730 DHB The “lightweight version” of our pneumatic conveyors
Mixokret M 730 DHB
M 730 DHB
The hydraulically driven M 730 combines all benefits of the Mixokret in the smallest of spaces. The small Mixokret is the ideal machine for small crews and lightweight truck units and is perfect for mixing and conveying floor screed, sand, gravel and fine grained concrete with a grain size of up to 16 mm.
Same as M 730 DH, but with hydraulically-operated loader for faster, power sparing filling of the mixing vessel. Part no. 111 572.020
M 730 DH n n n n n n n n n n n n n n n n n
Supplementary equipment
Wear resistant mixing blades Hydraulically driven mixer unit with forward/backward run and overload protection Extremely lightweight, hard-wearing plastic hood Intelligent air ducts 3-cylinder diesel engine Solid, more reliable chassis Tow bar can be lowered to 20 cm Analogue controls easy to read, protected by a robust flap Mixer drum with variable lid position Efficient vessel venting system Multi-stage low-wearing mixer shaft seal Exchangeable discharge connection with ID 50, 65 Delivery air cut-out Autom. central lubrication system Working light Lifting ring Integrated 40 l tool box
Part no. 495 393 on request 503 616 on request on request 489 515 on request 504 627 437 679 248 012.009
For accessories and hose packages, see pages 24-25.
Standard equipment: ball and ring hitch, operating instructions, standard tools, one discharge stand included. Please specify the required discharge stand when placing your order (see pages 24-25). Part no. 111 572.010
MM 2599/11 GB
Part Mixing time adjustment 5-30 sec. protection vessel including all WPs Trailer lighting 24 V Individual painting – hood (RAL paint, no metallic paint) Special labelling, with logo and 1-colour text Mix counter Other labelling Navigation and fleet management system Vehicle cable adapter 7 - 13 pin, 12 V Vehicle cable adapter 13 - 7 pin, 12 V
18
Floor screed conveyors
www.mortarmachines.com
The LED working light is a standard series accessory fitted to the rear of the Mixokret.
Technical data Special feature Theor. delivery rate* Delivery pressure Delivery distance* Compressor Drive motor Chassis Weight (tank full) Length Width Hight Loader height (vertical) Filling height Maximum grain size Discharge connection Skip volume Part no.
M 730 DHB with HPC**: Part no.
The discharge connection can be exchanged to match the diameter of the delivery hose.
M 730 DH
The M 730 has a powerful 3-cylinder diesel engine.
M 730 DHB
200 l mixing vessel, 150 l volume; max. perm. 6 bar vessel pressure basic version with skip 2.5 m3/h 3.0 m3/h 6 bar 6 bar 80 m wide, 45 m high 2.7 m3/min; switch-off pressure 7 bar 3-cylinder Kubota-diesel engine, 24 kW at 2,400 rpm fully galvanised chassis with adjustable coupling height (20 - 80 cm), robust T-chassis 1,200 kg 1,300 kg 4,500 mm 4,610 mm 1,500 mm 1,500 mm 1,880 mm 1,580 mm – 2,450 mm 820 mm 600 mm 16 mm 16 mm KKV 89 KKV 89 150 l 150 l 111 572.010 111 572.020
111 572.030
* The data is based on experience and is dependent on the materials used. ** HPC = High pressure cleaner
Further information is available in brochure MM 3966. For suggested accessories for various applications see pages 24-25. For additional accessories see page 79 ff.
19
MM 2599/11 GB
www.mortarmachines.com
Pneumatic conveyors
Mixokret M 740 D, M 740 DB, M 740 DBS The easy-to-use Mixokret with modern plastic hood
Mixokret M 740 D
Mixokret M 740 DBS
M 740 DB
The M 740 is the most successful screed conveyor in Europe. It is easy to use, easy to service and stylish. This real allrounder is suitable for mixing and conveying floor screed, sand, gravel and fine grained concrete with a grain size of up to 16 mm.
Same as M 740 D, but with loader for faster, power sparing filling of the mixing vessel. Part no. 111 570.220
M 740 D n n n n n n n n n n n n n n n n n
M 740 DBS
Wear resistant mixing blades Extremely lightweight, hard-wearing plastic hood Intelligent air control 3-cylinder diesel engine with inline design, fulfils emission standard COM III Solid, reliable chassis Tow bar can be lowered to 20 cm Analogue controls easy to read, protected by a robust flap Mixer drum with variable lid position Efficient vessel venting system Electro-pneumatic engagement and disengagement of the V-belt on the mixer drive Multi-stage low-wearing mixer shaft seal Exchangeable discharge connection with ID 50, 65, 90 Delivery air cut-out Autom. central lubrication system Working light Lifting ring Integrated 40 l tool box
Same as M 740 DB, but with hydraulically driven and radio or cable remote controlled scraper winch with 11 m hauling rope and practical cable guide mounted on the loader. Cable remote control available as alternative to radio remote control. Part no. 111 570.230 Supplementary equipment
Part Hydraulically driven high-pressure cleaner installation kit, up to 140 bar operating pressure, 600 l/ h, spray gun, 8 m high-pressure hose (only for M 740 DB + M 740 DBS) Exhaust system with particle filter Mixing time adjustment 5-30 sec. Trailer lighting 24 V Mix counter Individual painting – hood (RAL paint, no metallic-paint) Special labelling, with logo and 1-colour text Other labelling Service package 500 h Service package 1,000 h Navigation and fleet management system Vehicle cable adapter 7 - 13 pin, 12 V Vehicle cable adapter 13 - 7 pin, 12 V Mechanical water metering Protection vessel including all WPs
Part no. 484 438 on request 495 393 503 616 489 515 on request on request on request 493 689 504 208 504 627 437 679 248 012.009 531 014 214 538.009
Standard equipment: ball and ring hitch, operating instructions, standard tools, one discharge stand included.Please specify the required discharge stand when placing your order (see pages 24-25).
Part no. 111 570.210
For accessories and hose packages, see pages 24-25.
MM 2599/11 GB
20
Floor screed conveyors
www.mortarmachines.com
The control panel is well laid out and protected by a robust flap.
You can select the position of the lid on the mixing vessel as required.
M 740 DB
The M 740 has a powerful 3-cylinder diesel engine.
Technical data
M 740 D
M 740 DBS
Special feature Theor. delivery rate* Delivery pressure Delivery distance* Compressor Drive motor Chassis Weight (tank full) Length Width Height Loader height (vertical) Filling height Maximum grain size Discharge connection Skip volume Part no.
260 l mixing vessel; 200 l volume; max. perm. 8 bar vessel pressure basic version with skip with skip and scraper 3 3 3.8 m /h 4.6 m /h 5 m3/h 7 bar 7 bar 7 bar 180 m horizontally, 30 storeys high 4.3 m3/ min; switch-off pressure 7 bar D 2011 L03 3-cylinder Deutz diesel-engine, 31.5 kW at 2,300 rpm (emission category III A) fully galvanised chassis with adjustable coupling height (20 - 80 cm), robust T-chassis 1,564 kg 1,786 kg 1,872 kg 4,605 mm 4,800 mm 4,800 mm 1,500 mm 1,500 mm 1,500 mm 1,585 mm 1,585 mm 1,585 mm – 2,483 mm 2,820 mm with scraper 820 mm 600 mm 600 mm 16 mm 16 mm 16 mm KKV 70 KKV 70 KKV 70 260 l 260 l 260 l 111 570.210 111 570.220 111 570.230
* The data is based on experience and is dependent on the materials used.
Further information is available in brochure MM 3909. For suggested accessories for various applications see pages 24-25. For additional accessories see page 79 ff.
21
MM 2599/11 GB
www.mortarmachines.com
Pneumatic conveyors
Mixokret M 760 DH, M 760 DHB, M 760 DHBS The most powerful Mixokret ever – with 46 kW powerful diesel engine and hydraulic drive
Mixokret M 760 DH
Mixokret M 760 DHBS
M 760 DHB
The M 760 is our most powerful Mixokret. It is practical, easy to use, and easy to service. Like every Mixokret, this model is suitable for mixing and conveying floor screed, sand, gravel and fine grained concrete with a grain size of up to 16 mm.
Same as M 760 DH, but with skip for faster, power saving filling of the mixing vessel. Part no. 111 571.020
M 760 DH M 760 DHBS n n n n n n n n n n n n n n n n n
Wear resistant mixing blades Hydraulically driven mixer unit with forward / reverse and overload protection Extremely light-weight, hard-wearing plastic hood Intelligent air control 4-cylinder diesel engine with inline design, fulfils emission standard COM III Solid, reliable chassis Tow bar can be lowered to 20 cm Analogue controls easy to read, protected by a robust flap Mixer drum with variable lid position Efficient vessel venting system Multi-stage low-wearing mixer shaft seal Exchangeable discharge connection for ID 50, 65, 90 Delivery air cut-out Autom. central lubrication system Working light Lifting ring Integrated 40 l tool box
Same as the M 760 DHB, but with hydraulically driven and radio remote controlled scraper winch with 11 m hauling rope and practical rope guide mounted on the skip. Part no. 111 571.030
Supplementary equipment
Standard equipment: ball and ring hitch, operating instructions, standard tools, one discharge stand included. Please specify the required discharge stand when placing your order (see pages 24-25).
Part no. 484 438 495 393 214 538.009 503 616 489 515 on request on request on request 502 366 504 207 504 627 437 679 248 012.009 531 014 on request
For accessories and hose packages, see pages 24-25.
Part no. 111 571.010
MM 2599/11 GB
Part Hydraulically driven high-pressure cleaner installation kit, up to 140 bar operating pressure, with spray gun and 8 m high-pressure hose Mixing time adjustment 5-30 sec. protection vessel including all WPs Trailer lighting 24 V Mix counter Individual painting – (hood paint, no metallic-paint) Special labelling, with logo and 1-colour text Other labelling Service package 500 h Service package 1,000 h Navigation and fleet management system Vehicle cable adapter 7 - 13 pin, 12 V Vehicle cable adapter 13 - 7 pin, 12 V Mechanical water metering Exhaust system with particle filter
22
Floor screed conveyors
www.mortarmachines.com
The control panel is well laid out and protected by a robust flap.
You can select the position of the lid on the mixing vessel as required.
M 760 DHB
The diesel engine has an inline design for a tidier appearance and improved layout.
Technical data
M 760 DH
M 760 DHBS
Special feature Theor. delivery rate* Delivery pressure Delivery distance* Compressor Drive motor Chassis Weight (tank full) Length Width Height Loader height (vertical) Filling height Maximum grain size Discharge connection Skip volume Part no.
260 l mixing vessel; 200 l volume; max. perm. 8 bar vessel pressure basic version with skip with skip and scraper 4 m3/ h 4.8 m3/ h 5 m3/ h 7 bar 7 bar 7 bar 200 m horizontally, 50 storeys high 5.0 m3/ min, switch-off pressure 7 bar D 2011 L04 4-cylinder Deutz diesel-engine, 46 kW at 2.600 rpm (Emission category III A) fully galvanised chassis with adjustable coupling height (20 - 80 cm), robust T-chassis 1,600 kg 1,820 kg 1,900 kg 4,820 mm 4,820 mm 4,820 mm 1,500 mm 1,500 mm 1,500 mm 1,600 mm 1,600 mm 1,600 mm – 2,480 mm 2,830 mm with scraper 820 mm 600 mm 600 mm 16 mm 16 mm 16 mm KKV 70 KKV 70 KKV 70 260 l 260 l 260 l 111 571.010 111 571.020 111 571.030
* The data is based on experience and is dependent on the materials used.
Further information is available in brochure MM 3909. For suggested accessories for various applications see pages 24-25. For additional accessories see page 79 ff.
23
MM 2599/11 GB
www.mortarmachines.com
Suggested Accessories for floor screed conveyors
Standard delivery line with couplings for Mixokret PM 50/ ID 50 mm (up to 8 mm grain size*) Complete Set, Part no.: 533 089
Standard delivery line ≈ 40 m long, consisting of:
2x 1x 2x
Part ID 50 mm hose, 10 bar, length 20 m Discharge stand, tripod, aluminium ID 50 O-ring
6x Sponge rubber ball, ø 60 mm for delivery hose ID 50 1x Reducer piece ID 65, KKV 70/ ID 50
2x Rectangular gasket
optional: 1x ID 50 mm hose, 10 bar, length 10 m 1x ID 50 mm hose, 40 bar, length 20 m 1x Discharge stand, tripod, steel ID 50 1x Discharge stand, w. skid, steel ID 50 1x Discharge stand, w. skid, aluminium ID 50
Part no. Fig. 213 451.006 10 529 743 11 010 207.000 13 000 212.005 14 071 790.006 213 266.000 213 450.007 501 915 529 740 529 746 529 749
9 10 11 12 12
15
Delivery line KK 70 for Mixokret ID 65 mm (up to 12 mm grain size*) Complete Set, Part no.: 533 092
Standard delivery line ≈ 80 m long, consisting of:
8x 1x 8x 8x
Part ID 65 mm hose KK 70, 10 bar, 10 m Discharge stand, tripod, aluminum KK 70 O-ring Sponge rubber ball, ø 80 mm for delivery hose ID 65
optional: 1x NW 65 mm hose KK 70, 10 bar, 20 m 1x Discharge stand, tripod, steel KK 70 1x Discharge stand, w. skid, steel KK 70 1x Discharge stand, w. skid, aluminium KK 70
Part no. 456 831 529 744 010 207.000 000 246.000
Fig. 10 11 13 14
456 832 529 741 529 747 529 750
10 11 12 12
Delivery line KK 89 for Mixokret ID 65 mm (up to 12 mm grain size*) Complete Set, Part no.: 533 093
Standard delivery line ≈ 80 m long, consisting of:
8x 1x 1x 8x 8x
Part NW 65 mm hose KK 89 / HR, 10 bar, 10 m KKV 89 coupling Discharge stand, tripod, aluminium KK 89 O-ring Sponge rubber ball, ø 80 mm for delivery hose ID 65
optional: 1x NW 65 mm hose KK 89 / HR, 10 bar, 20 m 1x Discharge stand, tripod, steel KK 89 1x Discharge stand, w. skid, steel KK 89 1x Discharge stand, w. skid, aluminium KK 89
Part no. 443 675 209 205.004 529 745 002 224.004 000 246.000
Fig. 9 10 11 13 14
443 672 529 742 529 748 529 751
9 11 12 12
* dependent on the materials used
MM 2599/11 GB
24
Accessories for Floor screed conveyors
www.mortarmachines.com
Delivery line KK 89 for Mixokret ID 90 mm (up to 16 mm grain size*) Complete Set, Part no.: 533 095
Standard delivery line ≈ 80 m long, consisting of:
Part
8x 1x 8x 8x 1x
ID 90 mm hose KK 89, 10 bar, 10 m Discharge stand, w. skid, steel KK 89 O-ring Sponge rubber ball, ø 120 mm for delivery hose ID 90 Special outlet cpl. ID 90, KKV 89
optional: 1x Discharge stand, tripod, steel KK 89 1x Discharge stand, tripod, aluminium KK 89 1x Discharge stand, w. skid, aluminium KK 89
Part no.
455 436 529 748 002 224.004 016 091.003
Fig. 10 12 13 14
073 640.002
15
529 742 529 745 529 751
11 12 12
15
Delivery line KK 108 for Mixokret ID 90 mm (< 32 mm grain size*) Complete Set, Part no.: 533 096
Standard delivery line ≈ 80 m long, consisting of:
Part
8x 1x 1x 8x 8x
ID 90 hose KK108, 10 bar, 10 m Discharge stand KKM 108 Special outlet cpl. ID 90, KKV 108 Sponge rubber ball, ø 120 mm for delivery hose ID 90 O-ring
Part no.
454 406 209 811.003 419 634 016 091.003
Fig. 13 14 15 16
210 580.006
17
Accessory equipment for hose sets
Part Accessories for using hoses ID 50, PM50 (including reduction KKM 70, V 50 2x sponge rubber balls, O-rings)
Part no. 509 001
Accessories for using hoses ID 65 / KK70 (including sponge rubber balls, O-rings)
509 003
Accessories for using hoses ID 65 / KK89 (including coupling KKV 89, sponge rubber balls, O-rings)
509 006
Accessories for using hoses ID 90 / KK89 (including coupling KKV 89, sponge rubber balls, O-rings)
509 007
Accessories for using hoses ID 90 / KK108 (including coupling KKV 108, sponge rubber balls, O-rings)
518 339
* dependent on the materials used 25
MM 2599/11 GB
www.mortarmachines.com
Machine for pumping fine concrete and self levelling floor screed For small or large construction sites, for fine or coarse materials, for short or long delivery distances: Putzmeister machines achieve a high performance and alleviate your workload. Note: Always use a machine-compatible mortar in combination with machine technology. If you have any questions, please contact the material manufacturer or contact us directly.
– Ideal
Fine concrete
Not suitable
Conditional
Fine concrete grain up to ~ 8 mm
MM 2599/11 GB
Worm pumps SP 11 BHF/ SP 20 DHF
Pages 14-17
Piston pumps P 715
Pages 30-35
P 718
Pages 36-41
P 13 KA 230
Pages 76-78
Fine concrete grain up to ~ 16 mm
–
Fine concrete grain up to ~ 32 mm
– –
–
26
–
www.mortarmachines.com
Application overview – Fine concrete pumps
Self levelling floor screed Shotcrete grain up to ~ 8 mm
Ready mixed mortar grain up to ~ 8 mm
Construction site mix grain up to ~ 8 mm
– – –
27
MM 2599/11 GB
Piston pumps
www.mortarmachines.com
P 715 Compact trailer fine concrete pump for up to 16 mm grain
P 715 TD
Standard equipment: cleaning pipe 4.5“ SK, clamp coupling with seal, cleaning accessories and tools, protective helmet (yellow), operating manual and spare parts list
The small, light and efficient fine concrete pump trailer for pumping anhydrite, cement and cementrite self levelling floor screed and fine concrete up to 16 mm. Ideal for shotcreting, pressure pointing mortar and for concreting work for up to 16 mm grain.
Part no. 111 591.010
The S-valve allows pump pressures up to 68 bar, and is even seal-proof for slurries and water. Wear that occurs is compensated automatically with the automatic ring of the S-valve.
Special voltage configurations are available on request.
Supplementary equipment Part Central lubrication system Exhaust system particle filter Grid screen MW 10 for shotcrete Grid screen MW 20, detachable Cable remote control, 16 pin, 10 m, (pump on / off, reverse pumping, emergency off) Remote control cable, 16 pin, 10 m Remote control cable, 16 pin, 20 m Remote control cable, 16 pin, 50 m Radio remote control with transmitter and receiver (pump on/ off, reverse pumping, emergency off) Top for hopper High-pressure cleaner, up to 140 bar – installation kit – 600 l/ h with spray gun and 8 m high-pressure hose Flushing water pump, 20 bar, 50 l/min – installation kit – Working light, 12 V, 50 Watt Halogen Fuses, spare part package Ball hitch Special paint for hood (RAL colour) Additional equipment for pumping self-levelling floor screed, side air chamber End pipe with shutter Central lifting eye 13-pin to 7-pin adapter socket 7-pin to 13-pin adapter socket
P 715 n Diesel or electro-hydraulic drive in steel frame n Trailer with DIN hitch (truck) with overrunning brake permitted up to 80 km/ h or as a stationary skid version n Plastic engine hood and TARGA hoop n Hopper with agitator and rubber collar n Folding 30 mm safety grid screen with n 12 volt vibrator n Safety shut-off for agitator n Hopper with flap for emptying and cleaning n Folding hopper attachment n 2-cylinder piston pump with hard-chrome-plated delivery cylinders and a water box between the drive and delivery cylinders to flush the pistons and cool the piston rods n It is possible to replace the pistons through the water box n Hydraulic control of pump and S-valve. n Infinitely variable pumping rate, manually adjustable n The maximum pumping pressure can be set to 40 or 68 bar n Central lubrication manifold
MM 2599/11 GB
28
Part no. 489 663 487 073 514 057 491 025 536 808 480 388 480 394 480 395 533 250 436 551 526 919 439 892 462 956 268 931.005 213 458.009 on request 458 584 436 849 525 351 437 679 248 012.009
Fine concrete pumps
www.mortarmachines.com
Operation is easy. Everything is well laid out and easy to reach.
Technical data
P 715 TD
Simply fold the hopper away to the side. The agitator and S-valve are already easily accessible in front.
P 715 SD
P 715 TE
You can reach all areas for maintenance and servicing conveniently, for checking the oil level, for example.
P 715 SE
Machine type trailer pump stationary pump trailer pump stationary pump Pump 2-cyl. piston pump, hydraulically driven Theor. delivery rate (piston side) 4 - 17.4 m3 / h 4 - 17.4 m3 / h 4 - 18.2 m3 / h 4 - 18.2 m3 / h Delivery pressure (piston side) 68 bar 68 bar 68 bar 68 bar Cylinder diameter 150 mm 150 mm 150 mm 150 mm Diameter piston stroke 700 mm 700 mm 700 mm 700 mm Strokes per minute (minimum) 27 27 27 27 Drive cylinder diameter 80 / 45 mm 80 / 45 mm 80 / 45 mm 80 / 45 mm Drive motor 3-cyl. diesel engine Deutz DL07 2011, 34.5 kW 30 kW electric motor, 400 V, 50 Hz Hopper capacity TS 323 (250 l/ 280 l with rubber collar) Chassis 1,900 kg chassis, skid frame with 1,900 kg chassis, skid frame with with brakes mountings for fork-lift with brakes mountings for fork-lift Weight 1,850 kg 1,700 kg 1,800 kg 1,650 kg Length 4,200 mm 3,067 mm 4,200 mm 3,067 mm Width 1,510 mm 1,393 mm 1,510 mm 1,395 mm Height 1,600 mm 1,395 mm 1,600 mm 1,395 mm Filling height 1,180 mm 973 mm 1,180 mm 973 mm Maximum grain size 16 mm 16 mm 16 mm 16 mm Discharge connection SK 4.5“ SK 4.5“ SK 4.5“ SK 4.5“ Part no. 111 591.010 111 591.080 111 591.060 111 591.070
Further information is available in brochure MM 4288. For suggested accessories for various applications see pages 30-33. For additional accessories see page 90 ff.
29
MM 2599/11 GB
www.mortarmachines.com
Suggested accessories for P 715
Delivery line for fine concrete, mortar, self levelling floor screed, SK 50, 60 bar, ≤ 8 mm grain size Complete Set, Part no.: 533 038
Standard delivery line ≈ 100 m long, consisting of: Part 4x Clamp coupling SK 4.5“ 4x Seal DN 100, 4.5“ 55x Spring cotter 1x Elbow pipe SK 100 1x T-delivery pipe SK 100, 4.5“, 1,000 mm 1x Pressure gauge SK 100, 4.5“, 100 bar 1x Reduction pipe 100, 50-4.5“/ 3“, 1,500 mm 45x Clamp coupling SK, 3“ 55x Seal DN 65, 3“ 4x Elbow pipe SK 50, 3“, 90° 2x Delivery pipe SK 50, 3“, 1,000 mm 4x Delivery pipe SK 50, 3“, 2,000 mm 30x Delivery pipe SK 50, 3“, 3,000 mm 4x Elbow pipe SK 50, 3“, 45° 1x Delivery hose 3“, SK 50, 3“, 2.000 mm 6x Sponge rubber ball, ø 60 mm
Part no. 431 613 057 341.000 018 878.004 421 329 057 614.009 521 430 238 508.002 417 798 064 084.004 081 777.006 081 783.003 081 784.002 081 785.001 081 779.004 481 169 000 212.005
additional accessories: 1x Lid for T-delivery pipe, 4.5“ 1x PM pumping aid, 18 l in storage tank, 25 pcs
057 627.009 266 743.004
Fig. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Delivery line for fine concrete, mortar, self levelling floor screed, SK 65, 85 bar, ≤ 12 mm grain size Complete Set, Part no.: 533 042
Standard delivery line ≈ 100 m long, consisting of: Part 4x Clamp coupling SK 4,5“ 4x Seal DN 100, 4,5“ 49x Spring cotter 1x Elbow pipe SK 100, 4.5“, 90° 1x T-delivery pipe SK 100, 4.5“, 1,000 mm 1x Pressure gauge SK 100, 4.5“, 100 bar 1x Reduction pipe 100, 65-4.5“/ 3“, 1,000 mm 44x Clamp coupling SK 3“ 44x Seal DN 65, 3“ 4x Elbow pipe SK 65, 3“, 90° 2x Delivery pipe SK 65, 3“, 1,000 mm 4x Delivery pipe SK 65, 3“, 2,000 mm 29x Delivery pipe SK 65, 3“, 3,000 mm 4x Elbow pipe SK 65, 3“, 45° 1x Delivery hose SK 65, 3“, 5,000 mm 6x Sponge rubber ball, ø 65 mm
Part no. 431 613 057 341.000 018 878.004 421 329 057 614.009 521 430 224 269.009 417 798 064 084.004 057 756.006 057 727.006 057 728.005 057 729.004 057 758.004 057 886.002 000 246.000
additional accessories: 1x Lid for T-delivery pipe, 4.5“ 1x PM pumping aid, 18 l in storage tank, 25 pcs
057 627.009 266 743.004
MM 2599/11 GB
Fig. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
30
Suggested accessories for P 715
www.mortarmachines.com
Delivery line for mortar, self levelling floor screed, PM 50, 40 bar, ≤ 8 mm grain size Complete Set, Part no.: 533 046
Standard delivery line ≈ 80 m long, consisting of:
4x 4x 5x 2x 1x 1x 1x 1x 1x 1x 1x 6x 6x
Part Clamp coupling SK 4.5“ Seal DN 100, 4.5“ Spring cotter Elbow pipe SK 100, 4.5“, 90° T-delivery pipe SK 100, 4.5“, 1 m Pressure gauge SK 100, 4.5“, 100 bar Reduction pipe SK 100, 4.5“- SK 65 / 3“, 1.5 m Clamp coupling SK 3“ Seal DN 65, 3“ Transmission piece SK 50 / RA 2“ PM coupling V50, RI 2“ Mortar hose DN 50, 40 bar, 13.3 m Sponge rubber ball, ø 50 mm
additional accessories: 1x Lid for T-delivery pipe 1x PM pumping aid, 18 l in storage tank, 25 pcs
Part no. 431 613 057 341.000 018 878.004 421 329 057 614.009 521 430 238 508.002 417 798 064 084.004 082 784.001 205 273.001 501 914 000 212.005
Fig. 1 2 3 4 5 6 7 8 9 10 11 12 13
057 627.009 266 743.004
Concrete spray line SK 65, PM 50, 3“; max. 40 bar, ≤ 8 mm grain size Complete Set, Part no.: 533 047
Standard delivery line ≈ 50 m long, consisting of:
Part 4x Clamp coupling SK 4.5“ 4x Seal DN 100, 4.5“ 30x Spring cotter 2x Elbow pipe SK 100, 4.5“, 90° 1x T-delivery pipe SK 100, 4.5“, 1 m 1x Pressure gauge SK 100, 4.5“, 100 bar 1x Reduction pipe SK 100, 4.5“-SK 65, 3“, 1 m
Part no. 431 613 057 341.000 018 878.004 421 329 057 614.009 521 430 224 269.009
Fig. 1 2 3 4 5 6 7
Part 11x Clamp coupling SK 3“ 15x Seal DN 65, 3“ 8x Delivery hose SK 65, 3“, 5 m 1x Reduction pipe SK 65, 3“-SK 50, 3“, 1,000 mm 1x Transmission piece 1x PM coupling M 50, 2“ 1x Mortar hose DN 50 TS PN 40, 13 m 1x Concrete spraying nozzle V 50, 30 mm 2x Air hose ¾“, 20 m 6x Sponge rubber ball, ø 65 mm 6x Sponge rubber ball, ø 60 mm
additional accessories: 1x Lid for T-delivery pipe 1x PM pumping aid, 18 l in storage tank, 25 pcs Metering pump for accelerator (silicate): 1x Air hose ¾“, 20 m 1x Silicate metering pump with compressed air drive (barrel pump) with connector 2x High-pressure hose ½“, 20 m
31
Part no. 417 798 064 084.004 057 886.002 058 670.000 082 784.001 211 600.008 501 914 072 157.004 416 015 000 246.000 000 212.005
Fig. 8 9 10 11 12 13 14 15 16 17 18
057 627.009 266 743.004 416 015 002 423.009
16 19
001 983.003
20
MM 2599/11 GB
www.mortarmachines.com
High pressure concrete spray line, SK 65, SK 50, 3'', max 85 bar, ≤ 10 mm grain size Complete Set, Part no.: 533 048
Standard delivery line ≈ 60 m long, consisting of
Part 4x Clamp coupling SK 4.5“ 4x Seal DN 100, 4.5“ 30x Spring cotter 1x Elbow pipe SK 100, 90°, 4.5“ 1x T-delivery pipe SK 100, 4.5“, 1,000 mm 1x Pressure gauge SK 100, 4.5“, 100 bar 1x Reduction pipe SK 100, 4.5“- SK 65 / 3“, 1 m 16x Clamp coupling SK 3“ 16x Seal DN 65, 3“ 3x Delivery hose SK 65, 3“, 5,000 mm 1x Reduction pipe SK 65, 3“ - SK 50, 3“, 1,000 mm
Part no. 431 613 057 341.000 018 878.004 421 329 057 614.009 521 430 224 269.009 417 798 064 084.004 057 886.002 058 670.000
Fig. 1 2 3 4 5 6 7 8 9 10 11
4x 1x 1x 6x 6x 2x 1x 1x
Part Delivery hose SK 50, 3“, 5,000 mm Transmission piece SK 50, 3“ auf 2“, IG Concrete spraying nozzle with rubber nozzle 2“, AG Sponge rubber ball, ø 60 mm Sponge rubber ball, ø 80 mm Air hose 3/4“, 20 m Spare rubber nozzle Geka 3⁄8“RA
Part no. 481 171 082 784.001 532 589 000 212.005 000 246.000 416 015 532 590 041 403.006
additional accessories: 1 x Lid for T-delivery pipe 1 x PM pumping aid, 18 l in storage tank, 25 pcs
4
Metering pump for accelerator (silicate): 1x Air hose ¾“, 20 m 1x Silicate metering pump with compressed air drive (barrel pump) with connector 2x High-pressure hose ½“, 20 m
16 15
1,2,3
15 16 17
057 627.009 266 743.004
1,2,3
Fig. 12 13 14
416 015 002 423.009
17 18
001 983.003
19
1,2,3 6
5
1,2,3
17
17
14
18 4
1,2,3
7
10
8,9,3
8,9,3
11
8,9,3
12
19
Delivery line for fine concrete, mortar, self levelling floor screed, SK 100, 4.5“, 85 bar, ≤ 16 mm grain size Complete Set, Part no.: 533 051
Standard delivery line ≈ 100 m long, consisting of:
Part 48x Clamp coupling SK 4.5“ 55x Seal DN 100, 4.5“ 55x Spring cotter 4x Elbow pipe SK 100, 90°, 4.5“ 1x T-delivery pipe SK 100, 4.5“, 1,000 mm 1x Pressure gauge SK 100, 4.5“, 100 bar 30x Delivery pipe SK 100, 4.5“, 3,000 mm 4x Delivery pipe SK 100, 4.5“, 2,000 mm 2x Delivery pipe SK 100, 4.5“, 1,000 mm 4x Elbow pipe SK 100, 4.5“, 45° 1x Delivery hose SK 100, 4.5“, 2,850 mm 6x Sponge rubber ball, ø 100 mm
additional accessories: 1x Manual gate valve GVM 2/2, SK 100-4.5“ 1x Lid for T-delivery pipe, 4.5“ 1x PM pumping aid, 18 l in storage tank, 25 pcs 1x Pipe clamp for wall or floor 1x Delivery pipe 5,000 mm
MM 2599/11 GB
Part no. 431 613 057 341.000 018 878.004 421 329 057 614.009 521 430 056 863.000 056 862.001 056 861.002 057 593.007 057 607.003 016 091.003
Fig. 1 2 3 4 5 6 7 8 9 10 11 12
222 362.005 057 627.009 266 743.004 052 930.005 057 609.001
11
32
8,9,3
13
Suggested accessories for P 715
www.mortarmachines.com
Flexible delivery line for fine concrete, mortar, self levelling floor screed, NW 100, 4.5“,85 bar, ≤ 16 mm grain size Complete Set, Part no.: 533 049
Standard delivery line ≈ 50 m long, consisting of:
Part 22x Clamp coupling SK 4.5“ 22x Seal DN 100, 4.5“ 22x Spring cotter 2x Elbow pipe SK 100, 90°, 4,5“ 1x T-delivery pipeSK 100, 4.5“, 1000 mm 1x Pressure gauge SK 100, 4.5“, 100 bar 18x Delivery hose SK 100,4.5“, 2850 mm 6x Sponge rubber ball, ø 100 mm
Additional accessories: 1x Lid for T-delivery pipe 1x Manual gate valve GVM 2/2 SK 100, 4.5“ 1x PM pumping aid, 18 l in storage tank, 25 pcs 1x Delivery hose SK 100, 4.5“, 5 m
Part no. 431 613 057 341.000 018 878.004 421 329 057 614.009 521 430 057 607.003 016 091.003
Fig. 1 2 3 4 5 6 11 12
057 627.009 222 362.005 266 743.004 057 609.001
11
As an alternative to individual SK couplings and seals, you have the option of using SKD couplings with halved seals already integrated: Part SKD 4,5“ SKD 3“
33
Part No. 494 868 494 763
MM 2599/11 GB
Piston pump
www.mortarmachines.com
P 718 Compact trailer fine concrete pump with S-valve for up to 32 mm grain
P 718 TD
Standard equipment: cleaning accessories, toolbox with tools, protective helmet (yellow), operating manual and spare parts list.
The new P 718 offers all the advantages of its little sister the P 715 and is ideal for pumping fine concrete with a grain size of up to 32 mm in addition to traditional liquid screed applications.
Part no. 111 514.010
P 718 TD
Supplementary equipment
n 3-cyl. diesel engine Deutz motor, complies with the current COM III
exhaust emissions standard
n T-chassis, approved for road use
n Stable support feet for a reliable foothold
n Plastic engine hood and TARGA hoop
n Hopper with agitator and rubber collar
n Folding 30 mm safety grid screen with n 12 volt vibrator
n Safety shut off for agitator n Hopper with flap for emptying and cleaning
n Folding hopper attachment
n 2-cylinder piston pump with hard-chrome-plated delivery cylinders
and a water box between the drive and delivery cylinders to flush the pistons and cool the piston rods n It is possible to replace the pistons through the water box n Hydraulic control of pump and S-valve. n Infinitely variable pumping rate, manually adjustable n Central lubrication manifold n Lifting ring
MM 2599/11 GB
34
Part Central lubrication system Cable remote control, 16 pin, 10 m, (pump on / off, reverse pumping, emergency off) Remote control cable, 16 pin, 10 m Remote control cable, 16 pin, 20 m Remote control cable, 16 pin, 50 m Particle filter exhaust system Radio remote control with transmitter and receiver (pump on / off, reverse pumping, emergency off) High-pressure cleaner, 140 bar – installation kit – 600 l/ h with spray gun and 8 m high-pressure hose Flushing water pump, 20 bar, 80 l/min – installation kit – Working light, 12 V, 50 Watt Halogen End pipe with flap Ball hitch Special paint for hood (RAL colour) 13-pin to 7-pin adapter socket 7-pin to 13-pin adapter socket
Part no. 524 883 536 808 480 388 480 394 480 395 on request 533 250 526 919 on request 462 956 436 849 210 388.004 on request 437 679 248 012.009
Fine concrete pumps
www.mortarmachines.com
The P 718 is operated entirely from one side. From here, you always have the material flow from the truck mixer in view.
Technical data
P 718 TD
Machine type Pump Theor. delivery rate Theor. delivery pressure Cylinder diameter Diameter piston stroke Strokes per minute (minimum) Drive cylinder diameter Drive motor Hopper capacity Chassis Weight Length Width Height Filling height Maximum grain size Discharge connection Part no.
trailer pump
The large hopper need only to be folded away to the side for easy maintenance or cleaning. The agitator is already open and easily accessible in front of you.
P 718 SD
P 718 TDS
stationary pump trailer pump 2-cyl. piston pump, hydraulically driven 3 17.4 m /h* 17.4 m3 /h* 24 m3 /h** 70 bar* 70 bar* 50 bar** 150 mm 150 mm 150 mm 700 mm 700 mm 700 mm 25 25 36 80 / 45 mm 80 / 45 mm 80 / 45 mm 3-cyl. diesel engine Deutz D 2011 L03, 34.5 kW 360 l 360 l 360 l T-chassis, Knott skid frame with T-chassis, Knott 2,500 kg, with brakes mountings for fork-lift 2,500 kg, with brakes 2,320 kg 2,000 kg 2,320 kg 4,503 mm 3,025 mm 4,503 mm 1,600 mm 1,270 mm 1,600 mm 1,750 mm 1,559 mm 1,750 mm 1,180 mm 1,120 mm 1,180 mm 32 mm 32 mm 32 mm SK 5,5“ SK 5,5“ SK 5,5“ 111 514.010 on request 111 514.020
Once the hood is open, all maintenance and service areas can be accessed quickly and conveniently from here.
P 718 SE
P 718 TE
stationary pump
trailer pump
17.4 m3 /h* 17.4 m3 /h* 70 bar* 70 bar* 150 mm 150 mm 700 mm 700 mm 25 25 80 / 45 mm 80 / 45 mm 30 kW electric motor, 400 V, 50 Hz 360 l 360 l skid frame with T-chassis, Knott mountings for fork-lift 2,500 kg, with brakes 1,940 kg 2,260 kg 3,025 mm 4,503 mm 1,270 mm 1,600 mm 1,559 mm 1,750 mm 1,120 mm 1,180 mm 32 mm 32 mm SK 5,5“ SK 5,5“ on request on request
P 718 TD + high pressure cleaner +radio remote control Part no. 111 514.030 P 718 TD + high pressure cleaner +radio remote control Part no. 111 514.040 * bottom side driven ** rod side driven
Further information is available in brochure MM 4204. For suggested accessories for various applications see pages 36-39. For additional accessories see page 90 ff.
35
MM 2599/11 GB
www.mortarmachines.com
Suggested accessories for P 718
Delivery line for fine concrete, mortar, self levelling floor screed, ID 125, 5.5“, 85 bar, ≤ 32 mm grain size Complete Set, Part no.: 533 054
Standard delivery line ≈ 100 m long, consisting of:
Part 60x Clamp coupling SK 5.5“ 60x Seal 5.5“ 60x Spring cotter 6x Elbow pipe SK 125, 5.5“ 90° r=275 HD 1x T-delivery pipe SK 125, 5.5“ 1,000 mm 1x Pressure gauge SK 125, 5.5“ 100 bar 2x Delivery pipe SK 125, 5.5“, 1,000 mm 2x Delivery pipe SK 125, 5.5“, 2,000 mm 32x Delivery pipe SK 125, 5.5“, 3,000 mm 2x Elbow pipe SK 125, 5.5“, 45°, 2x Elbow pipe SK 125, 5.5“, 30°, 4x Delivery hose SK 125, 5.5“, 3,000 mm 6x Sponge rubber ball D150, medium 6x Sponge rubber ball D150, hard
Additional accessories: 1x Manual gate valve GVM 2/2 130 bar 1x Wash-out port lid SK 125, 5.5“ 1x PM pumping aid, 18 l in storage tank, 25 pcs 1x Support holder for end hose 1x Pipe clamp for wall or floor
MM 2599/11 GB
Part no. 417 249 055 559.001 018 878.004 261 402.007 057 615.008 521 448 056 849.008 056 850.000 056 851.009 057 596.004 258 935.008 433 497 018 841.002 223 673.007
Fig. 1 2 3 4 5 6 7 8 9 10 10 11 12 12
413 087 057 619.004 266 743.004 054 371.002 051 038.005
13
36
Suggested accessories for P 718
www.mortarmachines.com
Flexible delivery line for fine concrete, mortar, self levelling floor screed, ID 125, 5.5“, 85 bar, ≤ 32 mm grain size Complete Set, Part no.: 533 055
Standard delivery line ≈ 100 m long, consisting of:
Part 60x Clamp coupling SK 5.5“ 60x Seal 5.5“ 60x Spring cotter 4x Elbow pipe SK 125, 5.5“ 90° 1x T-delivery pipe SK 125, 5.5“, 1,000 mm 1x Pressure gauge SK 125, 5.5“, 100 bar 5x Delivery hose SK 125, 5.5“, 2,000 mm 18x Delivery hose SK 125, 5.5“, 5,000mm 6x Sponge rubber ball D150, medium 6 x Sponge rubber ball D150, hard 3 x End hose SK 125, 5.5“, 3,000 mm 13
Additional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs 1x Lid for T-delivery pipe, 5.5“ 1x Delivery hose SK 125, 5.5“ 3,000 mm 1x Delivery hose SK 125, 5.5“, 4,000 mm 1x Support holder for end hose 1x PM hose caddy, complete
Part no. Fig. 417 249 1 055 559.001 2 018 878.004 3 261 402.007 4 057 615.008 5 521 448 6 027 643.000 11 057 612.001 11 018 841.002 12 223 673.007 12 233 649.005
266 743.004 057 628.008 433 497 089 983.009 054 371.002 482 464
11 11
For additional accessories, like manual distributors or manual gate valves, etc. see page 90 ff. 37
MM 2599/11 GB
www.mortarmachines.com
Suggested accessories for P 718
Delivery line for fine concrete, mortar, self levelling floor screed, ID 100, 4.5“, 85 bar, ≤ 16 mm grain size Complete Set, Part no.: 533 052
Standard delivery line ≈ 100 m long, consisting of:
Part 6x Clamp coupling SK 5.5“ 6x Seal 5.5“ 60x Spring cotter 2x Elbow pipe SK 5.5“ 90° 1x T-delivery pipe SK 125, 5.5“; 1,000 mm 1x Pressure gauge SK 125, 5.5“ 100bar 1x Reduction pipe SK 125, 5.5'', SK100, 4,5“ 1,000 mm 50x Clamp coupling SK 4.5“ 50x Seal ID 100, 4.5“ 30x Delivery pipe SK 100, 4.5“, 3,000 mm 4x Delivery pipe SK 100, 4.5“, 3,000 mm 2x Delivery pipe SK 100, 4.5“, 3,000 mm 4x Elbow pipe SK 100, 4.5“, 90° 4x Elbow pipe SK 100, 4.5“, 45° 1x End hose SK 100, 4,5“, 2,850 mm 6x Sponge rubber ball DN120, ø 100 mm
Additional accessories: 1x Lid for T-delivery pipe, 5.5“ 1x Pipe clamp for wall or floor 1x PM pumping aid, 18 l in storage tank, 25 pcs
MM 2599/11 GB
Part no. 417 249 055 559.001 018 878.004 261 402.007 057 615.008 521 448 057 604.006
Fig. 1 2 3 4 5 6 7
431 613 057 341.000 056 863.000 056 862.001 056 861.002 421 329 057 593.007 057 607.003 016 091.003
8 9 10 11 12 13 13 14 15
057 628.008 051 038.005 266 743.004
16
38
Suggested accessories for P 718
www.mortarmachines.com
Flexible delivery line for fine concrete, mortar, self levelling floor screed, ID 100, 4.5“, 85 bar, ≤ 16 mm grain size Complete Set, Part no.: 533 053
Standard delivery line ≈ 100 m long, consisting of: Part 6x Clamp coupling SK 5.5“ 6x Seal 5.5“ 60x Spring cotter 2x Elbow pipe SK 125, 90°, 5.5“ 1x T-delivery pipe SK 125, 5.5“ 1000mm 1x Pressure gauge SK 125, 5.5“ 100bar 1x Reduction pipe SK 125, 5.5“, SK 100, 4.5“ 1,000 mm 50x Clamp coupling SK 100, 4.5“ 50x Seal ID 100, 4.5“ 18x Delivery hose SK 100, 4.5“, 2,850mm 6x Sponge rubber ball DN 120, ø 100 mm
Part no. 417 249 055 559.001 018 878.004 261 402.007 057 615.008 521 448 057 604.006
Fig. 1 2 3 4 5 6 7
431 613 057 341.000 057 607.003 016 091.003
8 9 10 11
Additional accessories: 1x Lid for T-delivery pipe, 5.5“ 1x PM pumping aid, 18 l in storage tank, 25 pcs
057 628.008 266 743.004
Optional: 1x Delivery hose SK 100, 4.5“, 5,000mm
057 609.001
10
For additional accessories, like manual distributors or manual gate valves, etc. see page 90 ff. 39
MM 2599/11 GB
www.mortarmachines.com Dry mixed mortar (bag/ silo/ container goods) Machine gypsum plasters
Ground coat plasters
No matter what you want: the right Putzmeister machine helps you to tackle most different operations in surface and underground engineering, and in the construction industry.
Mixer pumps MP 10 / MP 12 / MP 25
–
–
– –
– –
< 4 mm
Cement mortar
–
Lime and cement mortar
–
Lime mortar
Not suitable
Conditional
Gypsum lime machine plasters
Ideal
Rolling / spraying paint
–
Spray-on wood chip
Note: Always use a machine-compatible mortar in combination with machine technology. If you have any questions, please contact the material manufacturer or contact us directly.
Gypsum machine plasters
< 2 mm
Cement mortar
Paint
Lime and cement mortar
Coating
Lime mortar
Machines for mortars and plasters
Pages 44-51
Conveying units FA 420 / FAT 420
–
Pages 52-53
Worm pumps Sprayboy P12
Pages 54-57
Worm pumps Strobot 406 S
– – – – – – – –
Pages 62-63
– –
Worm pumps S5
–
– –
– –
–
Pages 64-69
Continuous mixer CM 528 – 20 Pages 70-71
Worm pumps SP 11 Beliso series
Pages 72-77
Piston pumps P 13 KA 230
MM 2599/11 GB
–
Pages 78-80
40
–
– – – – –
–
–– –– –
–
www.mortarmachines.com
–– – *
–– – – –
–
–
– – – * only mineral lightweight plasters
Cement plasters
Lime-cement plasters
Lime gypsum plasters
Lime plasters
Indoor plaster Exterior plaster Ma(mix design 1:3) (mix design 1:3) sonry mortar
Bonding mortar
all wet mortars (in the container or bucket)
Floating and set
Constructionsite mixes
– – – – – – – – –
– – – – – –– –– –– –– –– – – – –– – –
– – – – – – – – – –
– – –
–
–
– –
Plastic mortar/ Dispersion plasters
Plaster fillers
Rough coat
Floating and set
Sprayed rendering
–
Felt and floated plasters
Fine Ma- Refrac- SPCCtory mortar plasters sonry mortar mortar
Special plasters
Acoustic spray plaster
Bonding/ reinforcement mortar
Insulating plasters
Lightweight plasters
Mineral bondingmortar
Application overview – Plastering machines
–
– – – – –
– – – – – – – – – – – – – – – – – –
– – – – –
–
–– – –
41
MM 2599/11 GB
www.mortarmachines.com
Plastering machines
Mixer pumps MP 10, MP 12 Fully equipped mini-mixer pumps
MP 12 for filling by hand / from a bag
MP 10 for use with site-made mixes
Standard equipment: 10 m mortar hose, 10 m air hose, spray gun V 25-40, operating manual and spare parts list
The smallest Putzmeister mixing pumps of all time. And although it's hard to believe, they both offer everything you have come to expect from a genuine Putzmeister mixing pump: continuous mixing, good output, dismantlability and a comprehensive range of fittings as standard.
Part no. 111 594.010
Ideal machines for small companies, smaller jobs and situations where only a 230 V power supply is available. MP 12 MP 10
Identical to MP 10, with hinged bracket for optional compressor Part no. 111 595.019
n Small and powerful electric motor, detachable, with wedge closing device
(MP 12) or toggle lock (MP 10) n Compact unit with perfectly matched motor and frequency inverter n Large hopper with hinged grille and bag opener n Compressor with pressure cut-off n Detachable mixing zone n Pneumatic remote control n Integrated water pump with flow and pressure regulation n Compressor with pressure switch-off n Easily accessible flow meter for modifying the water quantity
Special voltage configurations are available on request.
Supplementary equipment MP 10 / MP 12
MM 2599/11 GB
42
Part Mixing spiral for lightweight plaster
Part no. 508 078
www.mortarmachines.com
Simply release the toggle locks of your MP 12 (MP 10 has wedge closures). You simply remove the motor and pump units in one.
Mixer pumps
Here you can set the water rate conveniently and accurately.
The operating elements are located centrally and are well protected to the rear of the two mixing pumps (MP 12 shown here).
Technical data
MP 10
MP 12
Drive motor Pump type Voltage Theor. delivery rate* Delivery pressure Air compressor Tank capacity Weight (approx.) Length Width Height Filling height Maximum grain size Discharge connection Part no.
1.5 kW, 82-575 rpm N13S 230V 50 Hz + 60 Hz 0.5-16 l/min** 30 bar max 230 V 50 Hz + 60 Hz, 180l/min 40 l 90 kg 1,500 mm 530 mm 790 mm 600 mm 4 mm V 25-40 111 594.010
1.5 kW, 82-575 rpm N13S 230V 50 Hz + 60 Hz 0.5-16 l/min** 30 bar max 230 V 50 Hz + 60 Hz, 180l/min 40 l 90 kg 1,500 mm 620 mm 1,020 mm 900 mm 4 mm V 25-40 111 595.019
* The delivery rate depends on the rotor/ stator and pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** Constant 16 l/min with mixing pump operation
The MP 10 / MP 12 can be used as a mixing pump or as a worm pump.
Further information is available in brochure MM 4102. For additional accessories see page 96 ff.
43
MM 2599/11 GB
Plastering machines
www.mortarmachines.com
Mixer pumps MP 25 MIXIT + MP 25 FMP 60 Machine with large supply hopper for dry mixed mortar
MP 25 FMP 60
Easy to disassemble, but difficult to outperform. The MP 25 is a true allrounder. Suitable for all pumpable ready-mixed dry mortars, whether from a bag or from a silo, for example interior-use plaster (gypsum/ gypsumlime plaster), external render (lime/ lime cement and insulating plaster), self levelling floor screed, cementitious adhesive and reinforcement mortar. Different pump parts and versions vary your mixing and pumping output of approximately 5-80 l/min.
Version for processing liquid screed from a bag at high power without a compressor, without air fittings and control, with a special mixing spiral and a modified mixing pipe flange Standard equipment: mixing shaft, Remote control cable 20m with toggle switch, cleaning tools, operating instructions and spare parts list
MP 25 MIXIT
Part no. 111 417.268
n Horizontal feeder n Powerful electric motor
Special voltage configurations are available on request.
n Large storage hopper n Conical mixing tube n Integrated water pump
Supplementary equipment
n Compressor with pressure switch-off n Compressed air remote control
Part Filter hood with control cable, probe, rectangular Water filter 5 m3/h, 3⁄4 ” GEKA Insulating plaster hopper extension Mixer shaft for insulating plaster Mixer shaft for bonding mortar Construction site electric supply cable with CEE-plug, 32 Amp, 50 m 5 x 2.5 mm Water hose, GEKA, coupling 3⁄4 ” NW, 40 m CEE coupling socket Reduction NW 35 / NW 25 Water suction hose
n Can be dismantled into practically sized assemblies
n Easily accessible flow meter for modifying the water quantity
A supply cable with CEE plug 5 x 2.5 mm2, 32 A is recommended here. Standard equipment: 1 x mortar hose 15 m, 25 / 40 mm, 1 x air hose 15 m, 1⁄2 ” Hose adapter V35 / V25, spray gun ID 25 / 40, mixing shaft, cleaning tools, operating instructions, standard tools and spare parts list
Only for MP 25 FMP 60 version: Reduction R8 - D pump O-ring für reduction R8 - D pump
Part no. 111 417.168
MM 2599/11 GB
44
Part no. 212 324.008 214 780.006 212 325.007 212 262.005 214 571.008 062 921.004 210 789.001 014 184.006 207 795.008 509 540 496 042 017 192.008
Mixer pumps
www.mortarmachines.com
The large hopper and the low filling height makes it distinctively more convenient and makes your work easier.
Material container and mixing tube are separated from each other. You open the gate valve and the material flows into the mixing tube.
Technical data
MP 25 MIXIT
MP 25 FMP 60
Pump type Theor. delivery rate* Delivery pressure Delivery distance** Air compressor Drive pump Drive hopper Tank capacity Water pump Weight Length Width Height Filling height Maximum grain size Discharge connection Part no.
D6 Power 25 l/min 40 bar up to 40 m horizontally, 15 m high 0.55 kW / 200 l/min 400 V / 50 Hz / 5.5 kW bei 392 rpm 1.1 kW at 23 UpM 115 l 0.78 kW at 3.4 m3/h 240 kg 1,324 mm 728 mm 1,443 mm 984 mm 4 mm M 35 111 417.168
R8 1.5 80 l/min 25 bar up to 40 m horizontally, 15 m high – 400 V / 50 Hz / 5.5 kW bei 321 rpm 1.1 kW bei 23 UpM 115 l 0.78 kW at 3.4 m3/h 245 kg 1,318 mm 765 mm 1,453 mm 984 mm 4 mm M 35 111 417.268
The MP 25 MIXIT can be dismantled into manageable, portable assemblies in no time at all.
* The delivery rate depends on the rotor/ stator and pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** The data is based on experience and is dependent on the materials used.
Further information is available in brochure MM 3476. For suggested accessories for various applications see pages 46-49. For additional accessories see page 96 ff.
45
MM 2599/11 GB
www.mortarmachines.com
Suggested accessories for MP 25
Accessories for preblended dry mortar (high performance 40 l/min) Complete Set, Part no.: 533 072
Standard delivery line ≈ 30 m long, consisting of:
Part Part no. Fig. 1x Pump parts D8-2 1 – Rotor D8-2 436 743 – Stator D8-2 436 746 1x Universal mixer shaft MP 25 211 773.003 2 1x Spray gun – short, straight V 35 203 054.002 3 2x Mortar hose ID 35, 13.3 m 207 615.007 4 2x Air hose 1/2“, 20 m 001 665.004 5 10x Sponge rubber ball ID 35 065 044.001 6 10x Seal ID 35 213 725.004 7 3x PM hose holder, made of leather 000 206.008
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
266 743.004
Accessories for insulating plaster (high performance 40 l/min) Complete Set, Part no.: 533 074
Standard delivery line ≈ 40 m long, consisting of:
1x
Part Part no. Fig. Pump parts D8-2 1 – Rotor D8-2 436 743 – Stator D8-2 436 746
1x Mixer shaft for insulating plaster MP 25 1x Spray gun with shut-off valve ID 35 2x Air hose 1/2“, 20 m 10x Seal ID 35 10x Sponge rubber ball ID 35 1x Insulating plaster attachment collar ID 25 3x Mortar hose ID 35, cpl. 13.3 m 3x PM hose holder, made of leather
212 262.005 209 174.009 001 665.004 213 725.004 065 044.001 212 325.007 207 615.007 000 206.008
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
266 743.004
MM 2599/11 GB
2 3 4 5 6 7 8
46
Suggested accessories for mixing pump MP 25
www.mortarmachines.com
Accessories for cement, reinforcement mortar, structural plaster (low performance 12 or 6 l/min) Complete Set, Part no.: 533 073
Standard delivery line ≈ 20 m long, consisting of:
1x 1x 1x 1x 2x
1x 5x 5x 1x 3x
Part Part no. Fig. Pump parts D4 1⁄2 (12 l/min) 1 1 – Rotor D4 ⁄2 214 402.009 1 – Stator D4 ⁄2 214 403.008 Cementitious adhesive mixer shaft for MP 25 214 571.008 2 Discharge meter 40-400 l/min 208 025.007 3 Insertion nozzle ø 4.5 mm x 55 mm 400 728 4 Hose line ID 25-40 5 – Hose line ID 25-40, 10 m 207 804.009 Fine plaster spray gun large, with PM-coupling 529 733 8 and Geka Air hose connection Sponge rubber ball ID 25 000 239.004 9 Seal ID 25 207 764.000 10 Air hose 1/2“, 20 m 001 665.004 11 PM hose holder, made of leather 000 206.008
Optional accessories: 1x Pump parts D4 1⁄4 (6 l/min) – Rotor D4 1⁄4 214 572.007 – Stator D4 1⁄4 214 573.006 1x PM pumping aid, 18 l in storage tank, 25 pcs 266 743.004
1x 1x 1x
Part Discharge meter as bypass (40-400 l/min) for D4 1⁄2 and D4 1⁄4 Adhesive gun DN 17 / M 25-40 with shut-off valve and electrical connection for remote control Extension cable 20 m
Part no. 407 200
Fig. 3
408 422
6
211 506.005
7
1
47
MM 2599/11 GB
www.mortarmachines.com
Accessories for self levelling floor screed with Uni mixer (performance up to 40 l/min) Complete Set, Part no.: 533 076
Standard delivery line ≈ 40 m long, consisting of:
Part Part no. Fig. 1x Uni mixer 400 566 1 cpl. with tie bolt + union nuts Pump parts: – 1 x Stator D8-2 436 746 2 – 1 x Rotor D8-2 with pin 436 744 1x Discharge pressure gauge 472 506 3 1x Electric remote control, 4 with ON/ OFF switch, 60 m long 269 447.006 3x Mortar hose ID 35, 13.3 m 207 615.007 5 1x Discharge meter 160-1,600 l/h 208 026.006 6 10x Sponge rubber ball ID 35 065 044.001 7 10x Seal ID 35 213 725.004 8 4x Spacer plate 207 770.007 9 8x Hexagon head bolt M 10 x 60 032 146.000
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
266 743.004
Accessories for preblended dry mortar from silo Complete Set, Part no.: 533 078
Standard delivery line ≈ 30 m long, consisting of:
Part Part no. 2x Mortar hose ID 35, cpl. 13.3 m 207 615.007 2x Air hose 1/2", 20 m 001 665.004 10x Seal ID 35 213 725.004 10x Sponge rubber ball ID 35 065 044.001 1x Feed hood with control cable and 212 324.008 probe, rectangular 3x PM hose holder, made of leather 000 206.008 1x Spray gun – short, straight V 35 203 054.002
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Fig. 1 2 3 4 6 5
266 743.004
For further details see pages 60 / 61.
MM 2599/11 GB
48
www.mortarmachines.com
Suggested accessories for mixing pump MP 25
Accessories for self levelling floor screed; with MP 25 FMP 60 only! Complete Set, Part no.: 533 077
Standard delivery line ≈ 40 m long, consisting of: Part Part no. 1x Pump parts R8 1.5 –Rotor R8 1.5 500 850 – Stator R8 1.5 501 062 10x Seal ID 35 213 725.004 10x Sponge rubber ball ID 35 065 044.001 1x Electric remote control, with ON / OFF switch 60 m long 269 447.006 3x Mortar hose 35, cpl. 13.3 m 207 615.007 1x Mixer shaft 503 353
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Fig. 1 2 3 4 5 6
266 743.004
Accessories for preblended dry mortar Complete Set, Part no.: 533 079
Standard delivery line ≈ 20 m long, consisting of:
2x 1x 5x 5x 3x
Part Mortar hose ID 25 - 40, 10 m Spray gun ID 25 Seal ID 25 Sponge rubber ball ID 35 PM hose holder, made of leather
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Part no. Fig. 207 804.009 1 402 592 2 207 764.000 3 000 239.004 4 000 206.008 266 743.004
49
MM 2599/11 GB
Conveying units
www.mortarmachines.com
Conveying units FA 420, FAT 420 The special dry conveying units for silo operation
FAT 420
The ideal complement to MP 25 and other mixer pumps. The economic dry conveying unit. It is optimally tuned to the performance of the mixer pumps that are used everyday. It conveys pneumatically dry plasters or similar materials from every standard vessel fully automatically into the mixer pump.
Same as FA 420, but as stationary version without chassis and silo aspiration. Part no. 111 447.015 Special voltage configurations are available on request.
FA 420 Supplementary equipment
n Pneumatic conveying system without silo ventilation (retrofit part) n Delivery vessel 65 l, delivery rate approx. 3,6 t/h n Control cabinet with probe 42 V/ 3 pin, incl. automatic phase detector
and pressure monitor control
A supply cable with CEE plug 5 x 4 mm, 32 A is recommended here.
Standard equipment: 1 air hose 5 m, size 1“, 2 hose sickle spanners BxC.
Part no. 111 446.016
Part Filter hood, round, cpl. with rotary wing probe, 42 V compact filter for MP 25 Delivery hose, PVC DN 38 x 12.5 m Delivery hose, PVC DN 38 x 25 m Pneumatic delivery hose, rubber, DN 38 x 12.5 m Pneumatic delivery hose, rubber, DN 38 x 25 m Exterior vibrator, 230 / 400 V, 50 Hz, 160 Watt with 5 m cable, CEE plug, 16 A, 5-pole Control cable 50 m for probe 42 V 3p Control cable 20 m for probe 42 V 3p Sack-filling hopper 80 l Sickle spanner
Filter hoods for other mixer pumps can be supplied adapted to the PMM conveying system.
MM 2599/11 GB
50
Fig. 1
Part no. 212 324.008
2 2
212 263.004 212 264.003 486 928 486 929
3
073 374.006
4 4
212 342.006 212 341.007 013 912.004 062 619.002
Conveying units
www.mortarmachines.com
The conveying system can be operated fully automatically via the control cabinet.
The FA 420 offers ample space under the hood for the delivery tank, an air injection hood and other accessories.
Technical data
FA 420
Silo connection Chassis Drive motor
DN 250 LK 300 mm, with quick-action couplings 450 kg, F 80, stationary brakeless 400 V, 25 A, 32 A plug, semi automatic, phase recognition 7.5 kW, 1,400 rpm, 129 m3/h, 2.5 bar, dry-running compressor, air cooled 1 ¼”, with pressure monitoring, prepared for connection silo ventilation 3p, 42 VAC, 16 A, rotary wing or capacitive system Light alloy coupling, system Storz, size C (LM C) 65 l, 59 kg, 945 mm 65 l, 59 kg, 945 mm e. g. 3.6 t/h, 50 m, density 1.2 kg/dm3 150 m 150 m 410 kg 180 kg 2,330 mm 1,050 mm 1,325 mm 560 mm 1,270 mm 560 mm 111 446.016 111 447.015
Compressor Air fittings Probe connection Hose connection Delivery vessel Theor. delivery rate* Delivery distance* Weight Length Width Height Part no.
The lightweight, manoeuvrable delivery container on the conveying system with actuator drive.
FAT 420
* depends on the material used and configuration of the hoses
Alternative: Stationary version
51
MM 2599/11 GB
www.mortarmachines.com
Worm pumps
Sprayboy P 12 The flexible mixer and pump unit
The small mortar pump, ideal mixing, pumping and spraying cemetitious adhesive, thin skim coat, fire-protection mortar, etc. from a hopper. Just the right machine for those working with building protective agents or stucco, carrying out renovation and repair work.
Standard equipment: Electric remote control cable 21 m, reduction connecting piece V 35 / V 25-40, operating manual, standard tools
Suitable for: e.g. anti-drumming compounds, levelling compounds, refractory mortar, sealing compounds, joint and casing mortar, paint compounds, priming coats, bonding mortars, refurbishing mortar, fillers, filling mortars, etc.
Part no. 111 469.060 (P 12) Part no. 111 469.020 (P 12 230 V) Special voltage configurations are available on request.
Supplementary equipment Sprayboy P 12 (P 12 230 V)
Part Extension for remote control cable, 20 m (binder) Pneumatic remote control cpl. (binder) Compressor HANDY, 250 l/min, 400 V / 50 Hz 3-phase Compressor HANDY, 250 l/min, 230 V / 50 Hz 1-phase Compressor V-MEKO 400, 360 l/min, 400 V / 50 Hz 3-phase For all MEKO compressors, you require: Geka coupling 1⁄4” Supply cable with CEE plug 5 x 2.5 mm2, 16 Amp. Supply cable with shock proof plug 230 V 3 x 2.5 mm2
n Electric worm pump drive n Large hopper n Two-stage speed transfer
We recommend an inlet cable with CEE plug 5 x 2.5 mm2, 16 Amp. (input 3 x 2.5 mm 2, 230 V plug). For plastering, a compressor (> 200 l/min) is required which must be supplied at the construction site. For texturing spray work, a compressor with at least 600 l/min air performance is required.
MM 2599/11 GB
52
Part no. 211 506.005 212 425.004 000 235.008 000 215.002 205 767.009 207 969.009 214 592.003 212 960.006
www.mortarmachines.com
In the central control cabinet, the electrical system is easily accessible at all times – which makes maintenance work easier.
Mortar spraying systems
The large Sprayboy hopper, in which material is mixed before pumping.
Discharge connection with pressure gauge for connection of the mortar hoses.
Technical data
P 12
P 12 230 V
Pump type Theor. delivery rate* Delivery pressure Delivery distance** Drive motor Drive pump Vessel content Weight Length Width Height Filling height Maximum grain size Discharge connection Part no.
D5 short 6 +12 l/min 25 bar up to 30 m horizontally, 15 m high 400 V / 50 Hz + 60 Hz, 16 A, 5p, 6h, CEE plug 1.4 kW at 94 rpm / 1.8 kW at 188 rpm 50 l 125 kg 714 mm 696 mm 1,437 mm 939 mm 4 mm M 35 111 469.060
D4 red 4.5 l/min 25 bar up to 20 m horizontally, 5 m high 230 V / 50 Hz + 60 Hz, 25 A, 3p, CEE plug 1.7 kW at 96 rpm 50 l 128 kg 714 mm 696 mm 1,437 mm 939 mm 3 mm M 35 111 469.020
* The delivery rate depends on the rotor/ stator and pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** The data is based on experience and is dependent on the materials used.
Further information is available in brochure MM 3213. For suggested accessories for various applications see pages 54-55. For additional accessories see page 96 ff.
53
MM 2599/11 GB
www.mortarmachines.com
Suggested accessories for Sprayboy P 12
Accessories for filling between frame connectors and walls with fire-retardant mortar with frame filling hose Complete Set, Part no.: 533 080
Standard delivery line ≈ 20 m long, consisting of:
2x 1x 3x 3x 1x 3x
Part Mortar hose ID 25, 10 m Frame connector filling pipe 30 cm M 25 - 40 Sealing ID 25 Sponge rubber ball ID 25 Electric remote control, with ON/ OFF switch, 20 m PM hose holder, made of leather
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Part no. 207 804.009 408 373 207 764.000 000 239.004 269 446.007
Fig. 1 2 3 4 5
000 206.008 266 743.004
Accessories for finishing works Complete Set, Part no.: 533 083
Standard delivery line ≈ 20 m long, consisting of:
2x 1x 1x 3x 3x 1x 1x 3x
Part Mortar hose ID 25, 10 m Air hose 1⁄2 “, 20 m Fine plaster spray gun, long Sponge rubber ball ID 25 Seal ID 25 Compressor V-Meko with fuse Geka-coupling 1⁄4 “ PM hose holder, made of leather
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
MM 2599/11 GB
Part no. Fig. 207 804.009 1 001 665.004 2 529 733 3 000 239.004 4 207 764.000 5 400 168 7 207 969.009 8 000 206.008
266 743.004
54
www.mortarmachines.com
Suggested accessories for Sprayboy P 12
Accessories for filling between frame connectors and walls with fire-retardant mortar with frame filling device Complete Set, Part no.: 533 081
Standard delivery line ≈ 20 m long, consisting of:
1x 3x 1x 1x 3x 3x
Part Mortar hose ID 25, 10 m Seal ID 25 Frame connector filling gun with remote control Extension for remote control cable, 20 m Sponge rubber ball ID 25 PM hose holder, made of leather
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Part no. Fig. 207 804.009 1 207 764.000 2 214 236.000 3 211 506.005 4 000 239.004 5 000 206.008 266 743.004
Accessories for anchor filling Complete Set, Part no.: 533 085
Standard delivery line ≈ 20 m long, consisting of:
1x 3x 1x 2x 1x 1x 3x 3x
Part Reduction V35 / V25-40 Seal ID 25 Pressure control device 2-32 bar Mortar hose ID 25-40 10m PM coupling M 25-40 / RI 1' Pressure gauge DN 25-40 Sponge rubber ball ID 25 PM hose holder, made of leather
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Part no. Fig. 207 795.008 1 207 764.000 2 523 102 3 207 804.009 4 211 597.001 5 208 745.002 000 239.004 6 000 206.008 266 743.004
55
MM 2599/11 GB
www.mortarmachines.com
Worm pumps
Delivery pump Strobot 406 S Delivery rate 0 to 15 l/ min
Strobot 406 S with 70 l high material hopper Strobot 406 S with 30 l material hopper
Series equipment of Strobot Strobot 406 S – with 30 l hopper
The Strobot 406 S is compact, handy and easy to use. With a few simple steps you can dismantle the lightweight (only 65 kg) into manageable components and then carry them easily at the jobsite.
Identical to 70 l version, but with 30 litre material hopper. Part no. 111 614.040
The Strobot 406 S is incredibly versatile and is suitable for various applications such as EIFS, acoustic spray plaster, fine plaster, …
Spare parts
Strobot 406 S
Part Blanking plug Main power cable, 230 V, 5 m Main plug, 230 V Material hopper, approx. 30 l Material high hopper, approx. 70 l Seal for material hopper Pre-screw (cardan shaft) Pre-screw (cardan shaft, paddle version) Attachment for quick assembly O-Ring 72 x 4 on gearbox flange Tension rod for tension jack Grid sleeve Pressure connection PM coupling Adaptor Geka / V 35
n Easy to disassemble into manageable units n High-performance electric motor n Continuous output regulation n Easy to transport due to the low weight
Series equipment of Strobot 406 S – with 70 l hopper Delivery pump Strobot 406 S, tube chassis 1 braking wheel, protection grid, 70 litre material high hopper, pressure outlet with mortar coupling M35, tool box with cleaning and tool set consisting of: 1 x 3/4“ IG bayonet connection, 1 x 1“ IG bayonet connection, 1 adaptor V35 / V25, 1 adaptor V25 / GEKA SH bayonet connection, 2 cleaning balls each for 19 mm diameter mortar hose and 25 mm diameter mortar hose, 1 jet bit with holder, 2 x SW 5/ SW 6 inbus keys with 1 puller bolt and 1 jacking bolt with covering disk, 1 chamfer checker, 1 cleaning tap with 2 bayonet connections, spare parts list Part no. 111 614.030
MM 2599/11 GB
56
Part no. 470 367 470 368 470 370 533 200 533 210 470 373 470 514 479 261 470 518 470 519 470 523 484 164 516 269 531 288
Mortar spraying systems
www.mortarmachines.com
The design of the Strobot series has a whole range of advantages when it comes to transport and use. For example, the delivery pumps can be stored upright in order to save space.
Technical data
The control panel allows you to control all the features of your delivery pump comfortable and effortlessly.
The Strobot 401 S 110 V is easy to dismantle – in just a few easy steps.
Strobot 406 S
Worm pump (rotor/ stator) FH 40/ EW 40 Delivery rate 0 to 15 l/ min (infinitely variable) Working pressure up to 30 bar Delivery height/ distance up to 30 m/ up to 48 m Motor 230 - 250 V/ 50 Hz, 2.2 kW at 215 rpm Hopper volume 70 l 30 l Lenghth 120 cm Width 58 cm Height (fillh height) 77 cm 53 cm Weight ca. 65 kg Granulation max.* 5 mm Pressure outlet M 35 Part no. 111614.030 111 614.040 * dependent on the materials used
You can find suitable accessory kits on pages 58-61, and more accessories from page 96 onwards.
57
MM 2599/11 GB
www.mortarmachines.com
Suggested accessories for Strobot 406 S
Spraying mineral and organic bonded fine plaster (up to 6 mm grain size) Complete set with PM-coupling, Part no.: 525 029
with 18 m hose combination consisting of:
1x 1x 1x 1x 1x
Part Part no. Mortar hose, 25 mm diameter, 15 m length 211 966.001 with V25-40 and M25-40 coupling Working hose, 19 mm diameter, 3 m length 530 630 with VST-X25/19R and MST-X25/19R coupling Remote control cable, with indication lamp, 19 m 470 361 Air hose, 10 mm diameter, 25 m length 470 489 with intermediate coupling at 18.5 m Hose holder for suspending the 462 704 18 m hose combination to the scaffold
Fig. 1
2
3 4
1x 1x 1x
Part Fine plaster spray gun, large with rotating joint M25 Nozzle ø 8 mm Nozzle ø 10 mm
Optionally available: 1x Remote control cable with toggle switch 1x Elbow joint, large for fine plaster spray gun, large
Part no. 531 475
Fig. 5
470 395 470 397
6 7
532 602 462 960
8
5 3
6
7
8
2 4 1
In addition, an air compressor with an air volume of 400-500 l/ min is required.
Complete set with Geka claw coupling, Part no.: 470 488 with 18 m hose combination consisting of:
1x 1x 1x 1x
Part Mortar hose, 25 mm diameter, 15 m length with 2 locking bayonet connections Working hose, 19 mm diameter, 3 m length with 1 bayonett connection and 1 locking bayonet connection Remote control cable, with indication lamp, 19 m Air hose, 10 mm diameter, 25 m length
1x 1x
Part Fine plaster spray gun, large with 8 mm nozzle and 10 mm nozzle Hose holder
Part no. 476 046
Fig. 1
468 846
2
470 361 470 489
3 4
Optionally available: 1x Remote control cable with toggle switch 1x Elbow joint, large for fine plaster spray gun, large
5 3
6
6
2 4 1
In addition, an air compressor with an air volume of 400-500 l/ min is required.
MM 2599/11 GB
58
Part no. 463 778
Fig.
5
462 704 532 602 462 960
6
Suggested accessories for Strobot 406 S
www.mortarmachines.com
Spraying of sprayable filling compounds Complete set with PM-coupling, Part no.: 533 040 with 18 m hose combination consisting of:
1x 1x 1x 1x 1x
Part Part no. Mortar hose, 25 mm diameter, 15 m length 211 966.001 with V25-40 and M25-40 coupling Working hose, 19 mm diameter, 3 m length 530 630 with VST-X25/19R and MST-X25/19R coupling 1 locking bayonet connection Remote control cable, with indication lamp, 19 m 470 361 Air hose, 10 mm diameter, 25 m length 470 489 with intermediate coupling at 18.5 m Hose holder for suspending the 462 704 18 m hose combination to the scaffold
Fig. 1
2
3 4
Part 1x Fine plaster spray gun, small with rotating joint M25 1x Nozzle ø 6.5 mm 1x Nozzle ø 8 mm 1x Fine plaster spray gun extension (80 cm) with mortar coupling and air hose extension Optionally available: 1x Remote control cable with toggle switch 1x Bag squeezer for wet material in bags
Part no. 531 472
Fig. 5
470 385 470 386 531 642
6 7 8
532 602 462 706
9
Part no. 463 736
Fig. 6
9 6
5 3 8
2
7
4 1
In addition, an air compressor with an air volume of 400-500 l/ min is required.
Complete set with Geka claw coupling, Part no.: 470 490
with 18 m hose combination consisting of:
1x 1x 1x 1x 1x
Part Part no. Mortar hose, 25 mm diameter, 15 m length 476 046 with 2 locking bayonet connections Working hose, 19 mm diameter, 3 m length 468 846 with 1 bayonett connection and 1 locking bayonet connection Remote control cable, with indication lamp, 19 m 470 361 Air hose, 10 mm diameter, 25 m length 470 489 Fine plaster spray gun, small 463 733 with 6.5 mm nozzle and 8 mm nozzle
Fig. 1
2
3 4 5
1x 1x
Part Fine plaster spray gun extension (80 cm) with air hose extension Hose holder
462 704
Optionally available: 1x Remote control cable with toggle switch 1x Bag squeezer for wet material in bags
532 602 462 706
7
7 5 3 6
2
4 1
In addition, an air compressor with an air volume of 400-500 l/ min is required.
59
MM 2599/11 GB
www.mortarmachines.com
Suggested accessories for Strobot 406 S
Spraying of acoustic spray plaster Complete set with PM-coupling, Part no.: 534 156 with 10 m hose combination consisting of:
1x 1x 1x 1x
Part Mortar hose, 10 m length, with PM-coupling Remote control cable with indication lamp, 11 m Air hose,EWO, 25 m length Fine plaster spray gun, large, with rotating joint M25 1x Nozzle ø 8 mm 1x Nozzle ø 10 mm
Part no. 207 804.009 470 362 462 721 531 475
Fig. 1 2 3 4
470 395 470 397
5 6
Part 1x Fine plaster spray gun extension (80 cm) with air hose extension and mortar coupling
Optionally available: 1x Remote control cable with toggle switch
Part no. 531 642
Fig. 7
532 602
2 4 5 6
7
3 1
In addition, an air compressor with an air volume of 400-500 l/ min is required.
Complete set with Geka claw coupling, Part no.: 470 492 with 10 m hose combination consisting of:
1x 1x 1x 1x
Part Mortar hose, 25 mm diameter, 10 m length with 2 locking bayonet connections Remote control cable with indication lamp, 11 m Air hose, 10 mm diameter, 25 m length Fine plaster spray gun, large, with 8 mm nozzle und 10 mm nozzle
Part no. 476 045
Fig. 1
1x Fine plaster spray gun extension (80 cm) with air hose extension 1x Hose holder
463 736 462 704
Optionally available: 1x Remote control cable with toggle switch
532 602
470 362 462 721 463 778
2 3 4
Part Part no.
2 5
4
3 1
In addition, an air compressor with an air volume of 400-500 l/ min is required.
MM 2599/11 GB
60
Fig. 5
Suggested accessories for Strobot 406 S
www.mortarmachines.com
Paint spraying Complete set with Geka claw coupling, Part no.: 470 462 with 15 m hose combination consisting of:
1x 1x 1x 1x 1x
Part Material hose, 13 mm diameter, 15 m length with 2 bayonet connections Extension for remote control cable, 16 m Air hose, 10 mm diameter, 25 m length Paint spray gun with nozzle set 2.2 mm Hose holder
Part no. 462 718
Fig. 1
462 719 462 721 543 004 462 704
2 3 4
Part Optionally available: 1x Remote control cable with toggle switch
Part no.
Fig.
532 602
5
Part no. 470 625 462 704
Fig. 4
5 4
3 2
In addition, an air compressor with an air volume of 400-500 l/ min is required.
1
Paint rolling Complete set with Geka claw coupling, Part no.: 470 464
with 15 m hose combination consisting of:
1x 1x 1x
Part Material hose, 13 mm diameter, 15 m length with 2 bayonet connections Roller extension pipe, 30 cm length Paint roller distributor, made of aluminium, 25 cm wide
Part no. 462 718
Fig. 1
462 708 462 710
2 3
Part 1x Karalon roller, padded 1x Hose holder
2 4
3
1
Grouting and back-filling Complete set with Geka claw coupling, Part no.: 470 486
with 7.5 m hose combination consisting of:
1x 1x 1x 1x 1x
Part Mortar hose, 19 mm diameter, 7.5 m length with 2 locking bayonet connections Remote control cable, with indication lamp, 10 m Shut-off valve Hose, 13 mm diameter, 1 m length Hose holder
Part no. 470 484
Fig. 1
470 358 470 570 470 485 462 704
2 3 4
Part Optionally available: 1x Remote control cable with toggle switch
Part no. 532 602
2 4
3
1
61
MM 2599/11 GB
www.mortarmachines.com
Worm pumps
Worm pump S 5 Universal worm pump
S 5 EV/TM
The universal worm pump for dry mix and wet mortar from bag or silo. The S 5 has a modular design. It is based on a powerful worm pump with a plugged cardan shaft for the quick replacement of worm parts without a tool and a pumping rate of 40 l/min. The TM version is fitted with a pan mixer for the best mixing quality.
Equipped as the S 5 EV, but with a pan mixer TM 100 with a mixing volume of 80 l and 2.2 kW electric drive. Suitable for multi component mortar or with effectively longer requested mixing time. Standard equipment: As version S 5 EV but wheel kit with inflatable rubber tyres.
Suitable for: ground coat plasters and insulating plasters, rough coat and textured plasters, trowel plaster, adhesive bonded joint, masonry mortar, refractory mortar, sealing suspensions, injection mortar, filling and anchoring mortar, dispersion plaster, fiber mortar, fibreglass concrete, bonding mortar, self levelling floor screed – infinitely variable according to material from approx. 7 l/min to 40 l/min (floor screed up to 90 l/min with 2L74).
Part no. 111 452.330
S 5 EF Worm pump with powerful constant drive for larger quantities of material, particularly suitable for self levelling floor screed. Fitted with vibrating screen and vibrator.
S 5 EV n Powerful electric vario drive
Standard equipment: Same as version S 5 EV but with worm pump 2L74, larger hopper and more powerful electric motor.
n Large hopper n Security grille (hinged) n Infinitely variable pumping rate n Plugged cardan shaft for quick exchange of the rotor/ stator
Part no. 111 452.090 Recommended is a power supply cable with CEE plug 5 x 4 mm2, 32 Amp. If pumpable wet mortar is mainly pumped and sprayed, a compressor > 200 l/min must be available on site for the spraying work. For texturing spray work, a compressor with at least 600 l/min air output is required.
Special voltage configurations are available on request.
Standard equipment: Set of wheels with pneumatic tyres, electric remote control cable 20 m, operating manual, standard tools, adaptor V 50- M 35. Part no. 111 452.310
MM 2599/11 GB
62
Mortar spraying systems
www.mortarmachines.com
The powerful S 5 EF for self levelling floorscreed.
The S 5 EV/TM with additional pan mixer is used wherever materials have to be mixed intensively.
Technical data
S 5 EV
S 5 EV/TM
S 5 EF
Special feature Worm pump Theor. delivery rate* Delivery pressure Delivery distance** Delivery height** Drive motor Drive mixer Hopper volume Length Width Height Weight Discharge connection Maximum grain size Part no.
basic version 2L6 7-40 l/min 25 bar up to 60 m up to 40 m 5.5 kW, 400 V / 50 Hz – 100 l 2,290 mm 680 mm 650 mm 190 kg 6 mm M 50 111 452.310
with pan mixer 2L6 7-40 l/min 25 bar up to 60 m up to 40 m 5.5 kW, 400 V / 50 Hz 2.2 kW 100 l 2,505 mm 680 mm 1.150 mm 400 kg 6 mm M 50 111 452.330
floor screed version 2L74 90 l/min 25 bar up to 60 m up to 40 m 7.5 kW, 400 V / 50 Hz – 130 l 2,610 mm 680 mm 650 mm 260 kg 10 mm M 50 111 452.090
* The delivery rate depends on the rotor/ stator and the pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower.
Supplementary equipment Part Pan mixer TM 100 Compressor HANDY, 250 l/min, 400 V / 50 Hz 3-phase Compressor V-MEKO 400, 360 l/min, 400 V / 50 Hz 3-phase and Geka coupling 1⁄4” Compressor 590 l/min, 10 bar, 20 l air accumulator, 3 kW, 400 V, 50 Hz Pneumatic remote control cpl. Chassis F 80, 750 kg, incl. certified inspection Remote control extension cable, 20 m Vibrating screen MW 10, 400 V, 50 Hz Cleaning connection M35 / GEKA Reducer coupling V 35-V25-40 Pressure check gauge DN 25-40 Supply cable with CEE plug, 32 Amp.
Part no. 111 353.002 000 235.008
205 767.009
207 969.009 213 264.002
465 951 208 732.006 470 037 208 322.001 070 692.008 207 795.008 208 745.002 062 921.004
** The data is based on experience and is dependent on the materials used.
Further information is available in brochure MM 4341. For suggested accessories for various applications see pages 64-67. For additional accessories see page 96 ff. 63
MM 2599/11 GB
www.mortarmachines.com
Suggested accessories
for S 5 with plugged cardan shaft (versions 111 452.310, 111 452.330) Accessories for job site mixes Complete Set, Part no.: 533 118
Standard delivery line ≈ 40 m long, consisting of:
Part 1x Pneumatic remote control 3x Mortar hose ID 35, 13.3 mm 1x Spray gun ID 35 2x Air hose, 20 m 1x Nozzle ø 16 mm 10x Seal ID 35 10x Sponge rubber ball ID 35 10x Seal ID 50
Part no. 465 951 207 615.007 001 306.004 001 665.004 521 643 213 725.004 065 044.001 213 266.000
3
8
Fig. 1 2 3 4 5 6 7
1x 1x 3x
Part Geka coupling ¼“ Compressor V-Meko with fuse PM hose holder, made of leather
Part no. 207 969.009 400 168 000 206.008
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Fig. 9 10
266 743.004
4 7
6
2
6
5
8
7
9 10
Accessories for dry mortar (for cement plaster, fire proofing, EIFS) Complete Set, Part no.: 533 120
Standard delivery line ≈ 30 m long, consisting of: Part Part no. Fig. 1x Pneumatic remote control 465 951 1 2x Mortar hose 35, 13.3 m 207 615.007 2 1x Mortar hose ID 35 207 808.005 3 V 35 - V 25 - 40, 5 m 2x Air hose ½“, 15 m 212 333.002 4 1x Fine plaster spray gun ID 25 408 237 5 1x Nozzle ø 12 mm 521 641 6 1x Nozzle ø 14 mm 521 642 7 5x Seal ID 35 213 725.004 8 3x Seal ID 25 207 764.000 9
Part 5x Sponge rubber ball ID 35 3x Sponge rubber ball ID 25 10x Seal ID 50 1x Geka coupling ¼“ 1x Compressor V-Meko with fuse 3x PM hose holder, made of leather
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
8
5
Part no. 065 044.001 000 239.004 213 266.000 207 969.009 400 168 000 206.008
Fig. 10 11 12 13 14
266 743.004
4 1
9 6
7
3
2 11
8
12
10
13 14
MM 2599/11 GB
64
Suggested accessories for S 5
www.mortarmachines.com
Accessories for fine plaster (< 4 mm grain size) Complete Set, Part no.: 533 119
Standard delivery line ≈ 20 m long, consisting of:
1x 5x 1x 1x 2x 1x 1x 1x 1x
Part fine plaster spray gun ID 25 Seal ID 25 Reduction ring V 35 - V 25-40 Pneumatic remote control Mortar hose ID 25, 10 m Air hose ½“, 20 m Cardan shaft D4 D6 Power rotor D6 Power stator
Part no. 529 733 207 764.000 207 795.008 465 951 207 804.009 001 665.004 525 378 443 740 206 345.006
2
Fig. 1 2 3 4 5 6 7 8 9
2x 3x 3x 1x
Part Connecting rod, 325 mm Sponge rubber ball ID 25 PM hose holder, made of leather Pressure outlet
Part no. 011 145.006 000 239.004 000 206.008 202 189.004
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
6
2 3
Fig. 10 11 12
266 743.004
12 4
5
1
10
11
8, 9
7
Accessories for anchor filling Complete Set, Part no.: 533 121
Standard delivery line ≈ 20 m long, consisting of:
Part 1x Reduction V 35 / V 25-40 1x Pressure control device 2-32 bar 2x Mortar hose ID 25, V 25/ M 25, 10 m 5x Seal ID 25 1x PM coupling M 25-40 / RI 1' 1x Pressure gauge DN 25-40 10x Seal ID 50
Part no. 207 795.008 523 101 207 804.009 207 764.000 211 597.001 208 745.002 213 266.000
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Fig. 1 2 3 4 5 6
266 743.004
2
5
4
4
3
4
1
65
6
MM 2599/11 GB
www.mortarmachines.com
Accessories for concrete renovation Complete Set, Part no.: 533 122
Standard delivery line ≈ 40 m long, consisting of:
Part 1x Pneumatic remote control 3x Mortar hose ID 35, 13.3 m 1x Refurbishing spray gun 1x Coupling V 35 2x Air hose, 20 m 5x Seal ID 35 10x Seal ID 50 1x Adaptor V 50 / M 35 5x Sponge rubber ball ID 35 1x Nozzle, ø 15 mm 3x PM hose holder, made of leather
Part no. 465 951 207 615.007 207 283.002 203 135.002 001 665.004 213 725.004 213 216.000 213 217.004 065 044.001 207 286.009 000 206.008
Fig. 1 2 3 4 5 6 7
Part Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs 1x Pressure outlet
Part no.
Fig.
266 743.004 202 189.004
10
In addition, a compressor with an air volume of 1,500 l/min is required.
8 9
1 5 9
3
4
6
2
6
7
10
8
Accessories for spraying GRC (glass fibre reinforced concrete) Complete Set, Part no.: 533 124
Standard delivery line ≈ 10 m long, consisting of:
1x 1x 1x 1x 1x 1x 1x 3x 3x 3x 2x 1x
Part Control panel GRC spray gun Hose connection cpl. Mortar hose ID 25, V 35 / V 25 - 40, 10 m Cardan shaft (spiral) Rotor D 8-2 Stator D 8-2 Seal ID 35 Seal ID 25 Sponge rubber ball ID 25 Tie bolt Pressure outlet
Part no. 207 223.004 070 436.002 209 347.001 207 809.004 525 378 436 743 436 746 213 725.004 207 764.000 000 239.004 011 145.006 202 189.004
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Fig. 1 2 3 4 5 6 7 8 9 10 11 12
266 743.004
2 4
9
MM 2599/11 GB
10
3
66
12
8
6, 7
11 5
8
Suggested accessories for S 5
www.mortarmachines.com
Accessories for self levelling floor screed; with S5EF only! Complete Set, Part no.: 533 123
Standard delivery line ≈ 40 m long, consisting of:
3x 5x 5x
Part Delivery hose ID 50, V 50, M 50 13.3 m Sponge rubber ball ID 50 Sealing ring ID 50
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Part no. 501 914 000 212.005 213 266.000
Fig. 1 2 3
266 743.004
1
3
2
Modification of the pump type 2L6 of the S 5 to other pump types Conversion from S 5 EV with screwed cardan shaft to D4, D4½, D4¼, D5 short, D6, D8-2++ with the following parts:
Conversion from S 5 EV with plugged cardan shaft (version Part no. 111 452.310, 111 452.330) to D4, D4½, D4¼, D5 short, D6, D8-2++ with the following parts:
Part 1x Cardan shaft (spiral) 2x Tie bolt (l=300 mm, M 20) 1x Pressure outlet
Part Cardan shaft (spiral) or Cardan shaft (paddle) 2x Tie bolt (l=325 mm, M 20) 1x
Part no. 202 342.003 206 185.004 011 145.006
Conversion from S 5 EV 2L6 to D5 with the following parts:
Conversion from S 5 EV 2L6 to D5 with the following parts: Part 1x Cardan shaft (spiral) or Cardan shaft (paddle) 1x D5 Rotor 1x D5 Stator 1x Clamp complt. 2x Tie bolt (l=410 mm, M 20)
Part Cardan shaft (spiral) 1x D5 Rotor 1x D5 Stator 1x Clamp complt. 2x Tie bolt (l=410 mm, M 20) 1x
Part no. 202 342.003 206 185.004 070 351.006 070 352.005 206 848.008 201 076.008
Part Cardan shaft (spiral) 1x 1L6 Rotor 1x 1L6 Stator 1x Clamp complt. 2x Tie bolt (l=300 mm, M 20)
Part no. 525 378 070 351.006 070 352.005 206 848.008 201 076.008
Conversion from S 5 EV 2L6 to 1L6 with the following parts:
Conversion from S 5 EV 2L6 to 1L6 with the following parts: 1x
Part no. 525 378 011 145.006 202 189.004
Part 1L6 Rotor 1x 1L6 Stator 1x Clamp complt. 2x Tie bolt (l=300 mm, M 20) 1x
Part no. 202 342.003 207 136.007 214 536.001 422 747 011 145.006
Part no. 214 537.000 214 536.001 422 747 011 145.006
Conversion from S 5 EV 2L6 to 2L54 with the following parts:
Part 2L54 Rotor 1x 2L54 Stator 1x Cardan shaft (spiral) 1x
Part no. 214 537.000 214 536.001 455 703
You can find rotors / stators on page 96 ff.
67
MM 2599/11 GB
www.mortarmachines.com
Continuous mixer
CM 528–20 The “small one” for bag material
The compact, lightweight, mobile continuous mixer for mixing ready-mix dry mortar.
Standard equipment: Frame with 2 wheels, operating instructions and power supply coupling.
The CM 528 can process almost all pumpable machine plasters, wall plasters, finishing plasters and even masonry mortar with a maximum grain size of 3 mm and represents a better, more cost-effective alternative to the manual agitator.
Part no. 111 476.002 (230 V single phase) Part no. 111 476.015 (400 V)
Supplementary equipment CM 528–20
CM 528–20 n Continuous mixer for bag material
n Driven by electric motor 2.2 kW, 230 V or 400 V
n Max. mixing capacity 25 l/min
n 70 litre sack filling hopper
MM 2599/11 GB
68
Part Discharge meter retrofit kit Supply cable, 3 x 2.5 mm2, with shock proof plug Supply cable, with CEE-plug, 5 x 2.5 mm2, 16 A.
Part no. 422 958 212 960.006 214 592.003
www.mortarmachines.com
Powerful motor on the continuous mixer CM 528.
Mortar spraying systems
Practical quick-release device for easy mixing tube removal.
Technical Data
CM 528–20 230 V, single phase
CM 528–20 400 V
Drive Water fittings Water flow press. Hopper Mixing tube Machine plug Mixer perf. Length Width Height Complete weight Max. grain size Part no.
2.2 kW / 280 rpm 230 V / 50 Hz / 14 A R 1/2” > 2.5 bar 70 l 650 mm shock-proof 16 A, 3p blue 25 l/min 1,700 mm 700 mm 1,000 mm 90 kg 3 mm 111 476.002
2.2 kW / 400 V 3 phases / 10 A R 1/2” > 2.5 bar 70 l 650 mm CEE 16 A, 5000 L 25 l/min 1,700 mm 700 mm 1,000 mm 95 kg 3 mm 111 476.015
69
Large hopper on the continuous mixer easy to fill due to low position.
MM 2599/11 GB
www.mortarmachines.com
Worm pumps
Beliso Series – SP 11 BMR, SP 11 BBR, SP 11 BUR Easy to use plastering machine for ready-mix and site mixes
Worm pump SP 11 BMR
Worm pump SP 11 BUR
SP 11 BBR
The sophisticated design and simple operation of the worm pump series SP 11 Beliso are extremely impressive. The machines are suitable for site mixes or bagged interior and external rendering, coloured mortar, limestone mortar, base plaster, light wall mortar, ornamental plaster, liquid screed and for filling and grouting work.
Features similar to the BMR version, but without PLC and with mechanical water metering and manual speed adjustment. Part no.
SP 11 BMR
HPC
DE
111 505.020
l
–
111 505.120
l
l
n PLC
SP 11 BUR
n Fully hydraulic pump and mixer drive n Lifting mixer for convenient filling n Excellent soundproofing due to sealed engine compartment
Features similar to the BMR version, but with 4-cylinder engine, chassis with brakes, mechanical water metering and manual speed adjustment.
n Low noise emissions n Automatic engine speed adjustment n Infinitely variable pumping rate n Autom. interval electronics prevent excessive mixing
Part no.
n Water metering
HPC
DE
l
l
n Mixing time adjuster
111 505.430
Standard equipment: operating instructions, spare parts list, standard tools and cleaning accessories
Supplementary equipment
Part no.
HPC
DE
111 505.010
l
111 505.030
l
l –
Part Working light 12 V Rubber wiper for window mixer blades Reduced price for dust extraction cpl., Radio remote control for SP 11 BMR, SP 11 BUR Vibrating screen compl. MW 10 Vibrating screen compl. MW 6.3 Cable remote control 60 m
HPC: High-pressure cleaner, DE: Dust extraction
MM 2599/11 GB
70
Part no. 474 461 212 652.000 211 845.009 487 305 491 728 262 506.009
Mortar spraying systems
www.mortarmachines.com
Powerful worm pump 2L6 with discharge connection to hose connection.
Technical data
The maximum engine speed of just 2,600 rpm and the good sound insulation make the SP 11 a machine that is quieter than average.
SP 11 BMR
SP 11 BBR
You can control and programme the complete machine from the control panel.
SP 11 BUR
Machine model lifting mixer lifting mixer lifting mixer Pump type 2L6 2L6 2L6 Delivery pressure 25 bar 25 bar 25 bar Theor. delivery rate* 5-40 l/min 5-40 l/min 7-40 l/min Delivery distance** 120 m horizontally 120 m horizontally 120 m horizontally Delivery height** 60 m high 60 m high 60 m high Compressor 2-cylinder-compressor 400 l/min, 7 bar Compulsory-type mixer 150 l 150 l 150 l Hopper 220 l 220 l 220 l Drive motor 3-cylinder Kubota, 17.9 kW*** 4-cylinder Kubota, 22.7 kW at 2,600 rpm at 2,600 rpm Chassis without brakes, road-worthy with brakes, road-worthy Bearing load (tow bar) 60 kg 60 kg 70 kg Weight 750 kg 750 kg 900 kg Length 3,420 mm 3,420 mm 3,924 mm Length without towbar 2,170 mm 2,170 mm - Width 1,420 mm 1,420 mm 1,420 mm Height 1,150 mm 1,150 mm 1,160 mm Filling height 880 mm 880 mm 880 mm Maximum grain size 6 mm 6 mm 6 mm Discharge connection M 50 M 50 M 50 Part no. 111 505.010 (+ DE + HPC) 111 505.120 (+ DE + HPC) 111 505.430 (+ DE + HPC) Part no. 111 505.030 (+ HPC) 111 505.020 (+ HPC) * The delivery rate depends on the rotor/ stator and the pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** The data is based on experience and is dependent on the materials used. *** The engine will be changed to the 17.9 kW D 1305 version in the course of 2011. The 15.7 kW D 1105 version will continue to be fitted until then.
Further information is available in brochure MM 3589. For suggested accessories for various applications see pages 74-75. For additional accessories see page 96 ff.
71
MM 2599/11 GB
Worm pumps
www.mortarmachines.com
Beliso Series – SP 11 BMB, SP 11 BMT Easy to use plastering machine for ready-mix and site mixes
Worm pump SP 11 BMB
Worm pump SP 11 BMT
SP 11 BMT
The basic versions of the SP 11 Beliso worm pump range have a sophisticated and robust design. The machines are suitable for site mixes or bagged interior and external rendering, coloured mortar, limestone mortar, base plaster, light wall mortar, ornamental plaster, liquid screed and for filling and grouting work.
n Trap mixer n Fully hydraulic pump and mixer drive n Excellent soundproofing due to sealed engine compartment n Low noise emissions n Manual engine speed adjustment n Infinitely variable pumping rate n Stable plastic hood for easy cleaning, rust-free for its entire service life
SP 11 BMB
n Mechanical water metering
Standard equipment: identical to SP 11 BMB
n Swivel mixer n Fully hydraulic pump and mixer drive n Excellent soundproofing due to sealed engine compartment n Low noise emissions n Engine speed adjustment n Manual throttle cable
HPC
DE
n Stable plastic hood for easy cleaning, rust-free for its entire service life
Part no. 111 505.080
l
n Mechanical water metering
111 505.180
l
l –
n Infinitely variable pumping rate
n Folding guard bracket
Standard equipment: High-pressure hose and spray lance, standard tools, operating instructions, vehicle coupling.
Supplementary equipment
Part no.
HPC
DE
111 505.150
l
111 505.160
l
l –
HPC: High-pressure cleaner, DE: Dust extraction
MM 2599/11 GB
72
Part Working light 12 V Rubber wiper for window mixer blades Vibrating screen compl. SP 11 BMT, MW 10 Vibrating screen compl. SP 11 SP 11 BMT, MW 6.3
Part no. 474 461 212 652.000 481 038 487 353
Mortar spraying systems
www.mortarmachines.com
Powerful worm pump 2L6 with discharge connection to hose connection.
The maximum engine speed of just 2,600 rpm and the good sound insulation make the SP 11 a machine that is quieter than average.
You can control and identify all machine functions from the central control panel.
Technical data
SP 11 BMB
SP 11 BMT
Machine model Pump type Delivery pressure Theor. delivery rate* Delivery distance** Delivery height** Air compressor Compulsory-type mixer Hopper volume Drive motor Chassis Weight Bearing load (tow bar) Length Length without towbar Width Height Filling height Maximum grain size Discharge connection Part no. Part no.
swivel mixer trap mixer 2L6 2L6 25 bar 25 bar 5-40 l/min 5-40 l/min 120 m horizontally 120 m horizontally 60 m high 60 m high 2-cylinder compressor 400 l/min, 7 bar 150 l 200 l 220 l 220 l 3-cylinder Kubota, 17.9 kW at 2,600 rpm*** without brakes, road-worthy 740 kg 730 kg 50 kg 50 kg 3,510 mm 3,510 mm 3,210 mm 3,210 mm 1,420 mm 1,420 mm 1,240 mm 1,220 mm 1,185 mm 1,125 mm 6 mm 6 mm M 50 M 50 111 505.150 (+ DE + HPC) 111 505.080 (+ DE + HPC) 111 505.160 (+ HPC) 111 505.180 (+ HPC)
* The delivery rate depends on the rotor/ stator and the pump speed (rpm). Depending on the speed, the delivery rate may be higher or lower. ** The data is based on experience and is dependent on the materials used. *** The engine will be changed to the 17.9 kW D 1305 version in the course of 2011. The 15.7 kW D 1105 version will continue to be fitted until then.
Further information is available in brochure MM 3589. For suggested accessories for various applications see pages 74-75. For additional accessories see page 96 ff.
73
MM 2599/11 GB
www.mortarmachines.com
Suggested accessories for SP 11 Beliso series
Accessories for Monocouche (Monocapa) Complete Set, Part no.: 401 133
Standard delivery line ≈ 30 m long, consisting of:
1x 1x 1x 1x 2x 1x 1x 1x
Part Mortar hose ID 35, V 50, M 35, 13.3 m Mortar hose ID 35, V 35, M 35, 13.3 m Mortar hose ID 25, V 25, M 24, 5 m Air hose Geka 1/2"; 40 m Sponge rubber ball ID 35 Spray gun ID 25-40 short Rubber fine plaster nozzle 8 mm Rubber fine plaster nozzle 10 mm
Part no. 207 616.006 207 615.007 207 808.005 214 734.007 065 044.001 408 237 214 751.006 214 752.005
Fig. 1 2 3 4 5 6
Part no. 501 914 207 616.006 214 734.007 213 725.004 000 212.005 065 044.001 213 266.000
Fig. 1 2 3 4 6 5 7
Part no. 207 616.006 207 615.007 214 734.007 213 725.004 213 266.000 065 044.001 203 054.002
Fig. 1 2 3 4 7 5 8
1x 1x 1x 1x 1x
Part Rubber fine plaster nozzle 12 mm Rubber fine plaster nozzle 14 mm Rubber fine plaster nozzle 16 mm Elastic mortar nozzle D 18 PM hose holder, made of leather
Part no. 214 753.004 214 754.003 214 755.002 001 329.007 000 206.008
Accessories for preblended dry mortar Complete Set, Part no.: 532 995
Standard delivery line ≈ 40 m long, consisting of:
2x 1x 1x 5x 5x 5x 5x
Part Mortar hose ID 50, V 50, M 50 13.3 m Mortar hose ID 35, V 50, M 35 13.3 m Air hose Geka 1/2"; 40 m Seal ID 35 Sponge rubber ball ID 50 Sponge rubber ball ID 35 Seal ID 50
Part Part no. 1x Spray gun V 35 203 054.002 3x PM hose holder, made of leather 000 206.008 Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs 266 743.004
Accessories for fire protection mortar Complete Set, Part no.: 533 638
Standard delivery line ≈ 40 m long, consisting of:
1x 2x 1x 5x 5x 5x 1x
Part Mortar hose ID 35, V 50, M 35 13.3 m Mortar hose ID 35, V 35, M 35 13.3 m Air hose Geka 1/2"; 40 m Seal ID 35 Seal ID 50 Sponge rubber ball ID 35 Spray gun V 35
MM 2599/11 GB
Part 3x PM hose holder, made of leather
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
74
Part no. 000 206.008 266 743.004
Fig. 8
Suggested accessories for SP 11 Beliso series
www.mortarmachines.com
Accessories for site mixes Complete Set, Part no.: 532 996
Standard delivery line ≈ 40 m long, consisting of:
2x 1x 1x 5x 5x 5x 5x 1x 3x
Part Mortar hose ID 50, V 50, M 50, 13.3 m Mortar hose ID 35, V 50, M 35, 13.3 m Air hose Geka 1/2"; 40 m Seal ID 35 Sponge rubber ball ID 35 Seal ID 50 Sponge rubber ball ID 50 Base plaster spray gun, short V 35 PM hose holder, made of leather
Part no. 501 914 207 616.006 214 734.007 213 725.004 065 044.001 213 266.000 000 212.005 001 306.004 000 206.008
Fig. 1 2 3 4 5 6 7 8
Part no. 501 914 213 266.000 000 212.005
Fig. 1 2 3
Part Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Part no. 266 743.004
Accessories for self levelling floor screed Complete Set, Part no.: 532 997
Standard delivery line ≈ 40 m long, consisting of:
3x 5x 5x
Part Mortar hose ID 50, V 50, M 50, 13.3 m Seal ID 50 Sponge rubber ball ID 50
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
266 743.004
Accessories for injection and grouting Complete Set, Part no.: 532 998
Standard delivery line ≈ 40 m long, consisting of:
3x 5x 5x 1x 1x
Part Mortar hose ID 50, V 50, M 50, 13.3 m Seal ID 50 Sponge rubber ball ID 50 Air hose Geka 1/2"; 40 m Injection lance compl. with T-piece, pressure gauge, remote control air valve, coupling w. nozzle pipe ID 50, mounted expanding collar D45 and collar D 38
Part no. 501 914 213 266.000 000 212.005 214 734.007 001 128.004
Fig. 1 2 3 4 5
Part 3x PM hose holder, made of leather
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
75
Part no. 000 206.008 266 743.004
MM 2599/11 GB
www.mortarmachines.com
Piston pumps
Piston pump P 13 KA 230 The robust machine with the new pump KA 230 for extremely demanding mixes and all sands up to 10 mm
Piston pump P 13 EMR + KA 230, without brakes
Standard accessories: Agitator in hopper, standard spray gun ID 35, box sieve ID 10 mm, T-piece, pressure gauge 100 bar, operating manual, standard tools, with ring hitch or optional ball hitch
The P 13 KA 230 with mechanical pump drive for demanding jobs. The robust double piston pump KA 230 was specially developed to deal with even the most demanding site-made mixes consisting of lime, cement, and all types of sand with a particle size of up to 10 mm. Although it is extremely powerful, it is low-wearing and completely reliable. Above all, this machine is intended for construction sites throughout the world which are subject to the most demanding conditions. It was therefore decided to avoid the use of electronic components. All functions and operating elements of the P 13 are purely mechanical and therefore particularly robust and insusceptible to malfunction.
P 13 DMR KA 230 Piston pump drive, 170 l trap mixer, output is mechanically adjustable over 3 stages.
Ideal for: Job-site mixes or exterior and interior plasters in bags, bentonite slurries, special mortars, insulating plasters, cement plaster, lime-cement plaster, lightweight masonry mortar, self levelling floor screed.
Part no. 111 460.070
Suitable for practically all sands with a particle size of up to 10 mm: Crushed sand, dune sand, washed river/sea sand, desert sand and much more…
Pump drive with electric motor 7.5 kW (11 kW for P 13 SEMR), 170 l trap mixer, output is mechanically adjustable over 3 stages.
P 13 EMR KA 230
Part no. 111 460.080
Supplementary equipment
P 13 KA 230
Part
n Specially designed for use with the most demanding site-made mixes
Sound
n Powerful 2-cylinder piston pump (1 working pump, 1 balance piston)
with new, larger valve head
n Robust and powerful diesel / electric motor
n Output is mechanically adjustable over 3 stages.
n Integrated compressor n Pneumatic remote control.
n Build-on trap mixer n Vibrating screen MW 10 mm n Pressure limiting on outlet
MM 2599/11 GB
76
insulation for P 13 DMR Water metering fittings with water meter Ring hitch (truck), with brakes Ring hitch (truck), without brakes Ball hitch with brakes Ball hitch without brakes T-piece ID 50 for connecting a pressure gauge Pressure gauge, cpl. 0-100 bar Safety bar
Part no. 002 741.008 208 611.000 212 700.004 212 154.003 212 704.000 212 153.004 071 554.006 426 388 541 126
www.mortarmachines.com
The large positive mixer ensures optimum mixture quality.
Mortar spraying systems
The P 13 is driven by a powerful 12.5 kW twin cylinder diesel engine. At 2800 revolutions per minute, it works at a relatively low speed and is extremely robust and low-maintenance.
Technical data
P 13 DMR KA 230
Pump Theor. delivery rate Delivery pressure Piston stroke Piston diameter Delivery distance* Air compressor Volume hopper Volume mixer Drive motor Chassis Fuse Weight Length Width Height Filling height Maximum grain size Discharge connection Part no.
Mechanical piston pump KA 230 20-80 l/min 30-90 l/min 40 bar 40 bar 130 mm 130 mm 100 mm 100 mm up to 300 m horizontally, up to 100 m high 2-cylinder compressor, 3.5 bar, 300 l/min 200 l 200 l 170 l 170 l 2-cylinder-Diesel engine electric motor 400 V 12.5 kW at 2,800 rpm 7.5 kW at 2,900 rpm without brakes without brakes – 20 A 990 kg 990 kg 3,000 mm 3,000 mm 1,640 mm 1,640 mm 1,450 mm 1,450 mm 1,300 mm 1,300 mm 10 mm 10 mm M 50 M 50 111 460.070 111 460.080
Braked version
111 460.100
The pressure connections of the piston pump KA 230 in the P 13 for the hose connection.
P 13 EMR KA 230
111 460.090
* The data is based on experience and is dependent on the used materials.
Further information is available in brochure MM 4347. For suggested accessories for various applications see pages 78. For additional accessories see page 106 ff. KA 230
77
MM 2599/11 GB
www.mortarmachines.com
Piston pumps
Suggested accessories for piston pumps P 13 Standard mortar pipe Complete Set, Part no.: 533 036
Standard delivery line ≈ 40 m long, consisting of:
2x 1x 1x 5x 5x 5x 5x 3x
Part Mortar hose ID 50, V 50 / M 50, 13.3 m Mortar hose ID 50 / M 35 / V 50, 13.3 m Air hose 40 m, 1⁄2 ” Seal ID 35 Seal ID 50 Sponge rubber ball ID 50 Sponge rubber ball ID 35 PM hose holder, made of leather
Part no. 501 914 207 616.006 214 734.007 213 725.004 213 266.000 000 212.005 065 044.001 000 206.008
3 4 5 6 7
Fig. 1 2
Part Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
Part no. 266 743.004
Accessories for injecting Complete Set, Part no.: 533 037
Standard delivery line ≈ 40 m long, consisting of:
5x 5x 3x 2x 1x
Part Seal ID 50 Sponge rubber ball ID 50 Mortar hose ID 50, V50 / M 50, 13.3 m Air hose 40 m, 1⁄2 ” Injection lance cpl. mit T-piece, pressure gauge, remote control air valve, coupling w. nozzle pipe ID 50, mounted expanding collar D45 and collar D 38
Part no. 213 266.000 000 212.005 501 914 214 734.007 001 128.004
Fig. 1 2 3 4 5
Part 1x PM hose holder, made of leather
Part no. 000 206.008
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
266 743.004
Accessories for spraying concrete, 40 bar max., grain size ≤ 8 mm Complete Set, Part no.: 543 144
≈ 40 m long, consisting of:
5x 5x 3x 1x 2x 1x
Part Seal ID 50 Sponge rubber ball ID 50 Mortar hose ID 50, V50 / M 50, 13.3 m Air hose 20 m, 3⁄4 ” Air hose 40 m, 1⁄2 ” Ball valve 1 1⁄2 ”
Part no. 213 266.000 000 212.005 501 914 416 015 214 734.007 207 792.001
Fig. 1 2 3 4 5 6
7
1 x 2x 1x
Part Concrete spray nozzle, V 50, 30 mm Geka coupling 1⁄2 ” PM hose holder, made of leather
Part no. Fig. 072 157.004 7 014 068.009 8 000 206.008
Optional accessories: 1x PM pumping aid, 18 l in storage tank, 25 pcs
8 6 8
266 743.004
5
1
For shotcrete work, a separate construction site compressor with an airflow rate of at least 4.5 m3 / is required.
3
1
1 7
MM 2599/11 GB
78
2
Accessories for floor screed conveyors
www.mortarmachines.com
Accessories for floor screed conveyors
Delivery hoses Mixokret ID 50 cpl. with couplings
6
Fig. 40 bar, 50 x 9 mm, length 13.3 m 6 40 bar, 50 x 9 mm, length 20 m 6 10 bar, 50 x 8 mm, length 10 m 6 10 bar, 50 x 8 mm, length 20 m 6 40 bar, 50 x 9 mm, length 13.3 m (white) 40 bar, 50 x 9 mm, length 20 m (white)
Part no. 501 914 501 915 213 450.007 213 451.006 531 330 531 331
Individual items for retrofitting* Coupling V 50 / S 50 1 Coupling M 50 / S 50 2 ID 50, hose, 40 bar, yard ware, 50 x 9 mm 3 ID 50, hose, 40 bar, yard ware, 50 x 9 mm (white) 3 ID 50, hose, 10 bar, yard ware, 50 x 8 mm 3 4x hose clip D 68 B 250 E 4 Sealing ring for coupling 5
206 604.006 211 595.003 501 913 531 327 213 449.005 001 046.005 213 266.000
* Does not correspond to original/only for repair
Delivery hoses Mixokret ID 65, KK 70, cpl. with couplings
7
Fig. 10 bar, 65 x 10 mm, length 10 m 7 10 bar, 65 x 10 mm, length 20 m 7 10 bar, 65 x 10 mm, length 10 m (white) Individual items for retrofitting* Coupling KKV 70 / S 65 Coupling KKM 70 / S 65 ID 65, hose, 10 bar, yard ware, 65 x 10 mm ID 65, hose, 10 bar, yard ware, 65 x 10 mm (white) 4x hose clip D 88, 9 B 19 Sealing ring for coupling
1 2 3 3 4 5
Part no. 456 831 456 832 531 329
211 352.000 211 351.001 001 685.000 531 328 015 288.008 010 207.000
* Does not correspond to original/only for repair
For attaching hoses PM hose holder made of leather
Part no. 000 206.008
79
MM 2599/11 GB
www.mortarmachines.com
Delivery hoses Mixokret ID 65, KK 89, cpl. with couplings
Fig. 10 bar, 65 x 10 mm, length 10 m 6 10 bar, 65 x 10 mm, length 20 m 6
6
Individual items for retrofitting (integrated externally)* Coupling KKV 89 / HR 65 Coupling KKM 89 / HR 65 Hose, 10 bar, yard ware, 65 x 10 mm 8 x washer A 8.4 8 x round head screw M8 x 25 8 x hexagon nut M 8 8 x washer 13 Sealing ring for coupling
1 2 3 4 4 4 4 5
Part no. 455 436
7 Individual items for retrofitting * Coupling KKV 89 / 90 S Coupling KKM 89 / 90 S Hose, 10 bar, 90 x 11.5 mm, 10 m 4x hose clip D 101 - 110 B 20 Sealing ring for coupling
213 734.008 213 735.007 001 685.000 037 107.002 043 198.005 034 105.007 037 107.002 002 224.004
Delivery hoses Mixokret ID 90, KK 89, cpl. with couplings
Fig. 10 bar, 90 x 10 mm, length 10 m 7
Part no. 443 675 443 672
1 2 3 4 5
455 303 455 316 454 408 016 337.000 210 580.006
Delivery hoses Mixokret ID 90, KK 108, cpl. with couplings
8
MM 2599/11 GB
10 bar, 90 x 11 mm, length 10 m
Fig. 8
Individual items for retrofitting* Coupling KKV 108 Coupling KKM 108 Hose, 10 bar, 90 x 11.5 mm, 10 m, without coupling 4x hose clip D 127 B 19 1tlg. Sealing ring for coupling O-Ring 124 x 18, NBR 55-60
1 2 3 4 5
80
Part no. 454 406
453 503 453 504 454 408 016 337.000 210 580.006
* Does not correspond to original/only for repair
Accessories for floor screed conveyors
www.mortarmachines.com
Putzmeister couplings for Mixokret hoses with ID 50, ID 65 and ID 70 mm
1
2a
2b
3
4a
4b
Couplings ID KKM 70 / RI 21⁄2“
Fig. 1
Part no. 015 664.004
M 65 / S 65 V 65 / S 65
2a 2b
M 65 / RI 21⁄2” V 65 / RI 21⁄2”
3
M 50 / S 50 V 50 / S 50
4a 4b
211 595.003 206 604.006
M 50 RI 2“
5
211 600.008
402 274 402 289
402 288 402 290
5
Universal joint couplings for Mixokret hoses with ID 50-90 mm
1a
2a
1b
2b
3a
4a
3b
4b
5a
5b
6b
6a
7a
7b
8a
8b
9
10a
10b
Couplings ID KKM 70 HR 50 KKV 70 HR 50
Fig. 1a 1b
Part no. 213 736.006 213 737.005
KKM 70 / 60 S KKV 70 / 60 S
2a 2b
071 946.009 071 945.000
KKM 70 / 65 S KKV 70 / 65 S
3a 3b
211 351.001 211 352.000
KKM 89 HR 65 KKV 89 HR 65
4a 4b
213 735.007 213 734.008
KKM 89 / 90 S KKV 89 / 90 S
5a 5b
065 109.001 065 108.002
KKM 70-R 21⁄2” KKV 70-R 21⁄2”
6a 6b
015 664.004 015 197.005
KKM 89-R 21⁄2” KKV 89-R 21⁄2”
7a 7b
014 895.007 209 205.004
KKM 89-R 3” KKV 89-R 3”
8a 8b
209 325.007 073 443.005
KKM 70 / V50 reduction coupling
9
071 790.006
KKV 89, NW 65 mm KKM 89, NW 65 mm
10a 10b
KKV 108, 90 S KKM 108, 90 S
455 902 455 904 453 503 453 504
M = female part V = male part
81
S = nozzle pipe HR = integrated externally
MM 2599/11 GB
www.mortarmachines.com
1 1
2
1
2 3
3 3 2
Wear plates for Mixokret M 700, M 710, M 740 and M 760
Quantity Description per vessel Standard wear plates: 1x With hole 2x Front / rear 2x On top, crosswise 5 6
6
4
5
7
Part no.
1 2 3
429 862 429 864 429 865
Highly wear resistant plates: 1x With hole (6 mm) 2x Front / rear (6 mm) 2x On top, crosswise (6 mm)
1 2 3
212 322.000 212 321.001 212 323.009
Plastic wear plates 1x With hole 2x Front / rear 2x On top, crosswise
4 5 6
484310 484311 484312
Bolt set for standard wear plate: 10x Countersunk screw 10x Cap nut 10x Seal ring
454 147 033 606.002 018 891.007
Bolt set for highly wear resistant plates: 10x Countersunk screw 10x Cap nut 10x Seal ring
031 366.001 033 606.002 018 891.007
Bolt set for plastic wear plates: 10x Countersunk screw 10x Cap nut 10x Seal ring
202 194.002 033 606.002 018 891.007
Steel plate for dished boiler ends (4 mm) 2x Front wear plate I 2x Front wear plate II
8
MM 2599/11 GB
Fig.
82
7 8
430 139 430 140
Set wear plates M 700, M 710, M 740, M 760, cpl. with countersunk screws, cap nuts and seal rings: 1x Set standard wear plates 1x Set highly wear resistant plates 1x Set plastic wear plates
524 537 214 307.007 492 658
Accessories for floor screed conveyors
www.mortarmachines.com
Wear plates for Mixokret M 730
1x 1x
Wear plate I Wear plate II
Set of screws and bolts for wear plates: 10x Countersunk screw 10x Cap nut 10x Seal ring
Part no. 430 208 430 209
043 570.005 033 606.002 018 891.007
Set wear plates M 730, cpl. with countersunk screws, cap nuts and seal rings: 1x Set wear plates
Wear plates for Mixokret M 500
1x 3x 9x 9x
2
2
2
Wear plate with hand-hole Wear plate Rubber seal Cap Nut, M 10
1
1
3
2
4a
524 538
4b
5b
5a
Fig. 1 2
Part no. 401 660 073 163.000 037 526.007 033 606.002
Mixing paddles for Mixokret
Mixing paddle, front Mixer plate, front, for Mixokret M 730
Fig. 1 1
Part no. 205 305.005 207 885.002
Mixing paddle, middle, 2 pieces Mixer plate, middle, 2 pieces for Mixokret M 730
2 2
205 306.004 207 886.001
Mixing paddle, rear Mixer plate, rear, for Mixokret M 730
3 3
205 237.005 207 887.000
M 760, M 740, M 730, M 710, M 700: Mixing paddle holder, 2 pieces, rear Mixing paddle holder, 2 pieces, front
4a 4b
205 514.003 205 513.004
M 500: Mixing paddle holder, 3 pieces, inner Mixing paddle holder, 2 pieces, outer
5a 5b
471 601 471 599
Mixer blade kit for Mixokret M 3000 and M 700 cpl. in plastic bucket with attachment screws Mixer blade kit for Mixokret M 2000 item in plastic bucket complete
6
206 581.006
6
208 583.002
6
83
MM 2599/11 GB
www.mortarmachines.com
1
2
Discharge stands
MM 2599/11 GB
Discharge stand, tripod Steel, ID 50 Steel, KK 70 Steel, KK 89
Fig. 1 1 1
Aluminium, ID 50 Aluminium, KK 70 Aluminium, KK 89
2 2 2
Part no. 529 740 529 741 529 742 529 743 529 744 529 745
Discharge stand, skid Fig. Steel, ID 50 Steel, KK 70 Steel,KK 89
Part no. 529 746 529 747 529 748
Aluminium, ID 50 Aluminium, KK 70 Aluminium, KK 89
529 749 529 750 529 751
3 3 3
84
www.mortarmachines.com
Accessories for floor screed conveyors
4
3
Fig. Discharge stand, tripod incl. adapter KK 70 KK 89, detachable legs Discharge stand, KKM 108, 4
Part no. 517 367 209 811.003
Wear and spare parts for discharge stands (V)
Adapter discharge stand ID 50 Adapter discharge stand KK 70 Adapter discharge stand KK 89 Retainer for Adapter discharge stand TPU rubber pot, natural, for discharge stand Rubber foot
85
Part no. 458 782 458 783 496 531 499 202 468 004 435 226
MM 2599/11 GB
www.mortarmachines.com
Vessel testing device
With silencer
Part no. 486 615
ID 50 ID 65
Part no. 015 468.006 015 162.001
PM hose holder made of leather
Part no. 000 206.008
Injection branch
For attaching hoses
MM 2599/11 GB
86
Accessories for floor screed conveyors
www.mortarmachines.com
Floor screed smoothing machine EB 600L
With 230 V, 50 Hz electric gear motor 1.1 kW, 120 kpm, smoothing disc dia. 600 mm, height-adjustable guide frame, cpl. with CEE standard coupling 16 A, gross weight 42 kg
Floor screed sleekingplate
D 600, light, for smoothing machine EB 600 L
Part no. H 280 974 1847
Connecting site cable to power supply
Extension cable 16 Amp., 230 V 3 x 2.5 mm2, 20 m Extension cable with CEE-plug, 16 Amp., 10 m, 5 x 2.5 mm2 Extension cable with CEE-plug, 16 Amp., 25 m, 5 x 2.5 mm2 Extension cable with CEE-plug, 32 Amp., 50 m, 5 x 2.5 mm2 Extension cable with CEE-plug, 32 Amp., 25 m, 5 x 4 mm2 Extension cable with CEE-plug, 32 Amp., 50 m, 5 x 4 mm2
Part no. 489 702
Part no. 212 960.006 211 457.002 214 592.003 062 921.004 062 922.003 062 923.002
Frequency measuring device
For checking the belt tension on the V/ ribbed/ toothed belt
87
Part no. 466 768
MM 2599/11 GB
www.mortarmachines.com
Smoothing and measuring floats, model SLN
with 1 horizontal level, dimension: approx. 80 x 17 mm measuring acc.: 1 mm/m = 0,057° in normal position 100 cm 150 cm 200 cm 250 cm 300 cm
Part no. 362 315.006 362 316.005 362 317.004 362 318.003 362 319.002
with high feet for larger self levelling floor screed height standard 12 cm high 14 cm
Part no. 211 703.002 211 704.001
Levelling tripods
Floor screed shoe cover
for working on fresh self levelling floor screed Front belt Rear belt
1 pair of spikes
screed shoe for work on fresh screed
MM 2599/11 GB
Part no. 362 360.006 362 771.000 362 772.000
88
Part no. 531 746
Accessories for floor screed conveyors
www.mortarmachines.com
Knee protectors
Harmonica
1
box-form made of polyurethane, CFC-free production, certified as per DIN EN 14404
Fig. 1
Part no. 362 344.006
2
362 343.007
2
Strap (without Fig.) Part no. 362 345.005 362 346.004
270 mm 410 mm
Protective helmet – yellow
with PM-imprint
89
Part no. 064 626.006
MM 2599/11 GB
www.mortarmachines.com
Accessories for fine concrete pumps
Delivery pipes
2
1
3 4
Delivery pipe SK 50, 3'', 1,000 mm Delivery pipe SK 50, 3'', 2,000 mm Delivery pipe SK 50, 3'', 3,000 mm Delivery pipe SK 65, 3'', 1,000 mm Delivery pipe SK 65, 3'', 2,000 mm Delivery pipe SK 65, 3'', 3,000 mm Delivery pipe SK 100, 4.5'', 1,000 mm Delivery pipe SK 100, 4.5'', 2,000 mm Delivery pipe SK 100, 4.5'', 3,000 mm Delivery pipe SK 100, 4.5'', 6,000 mm Delivery pipe SK 125, 5.5'', 1,000 mm Delivery pipe SK 125, 5.5'', 2,000 mm Delivery pipe SK 125, 5.5'', 3,000mm Delivery pipe SK 125, 5.5'', 4,000 mm Delivery pipe SK 125, 5.5'', 6,000 mm
Fig. 1 1 1 2 2 2 3 3 3 3 4 4 4 4 4
Part no. 081 783.003 081 784.002 081 785.001 057 727.006 057 728.005 057 729.004 056 861.002 056 862.001 056 863.000 057 601.009 056 849.008 056 850.000 056 851.009 087 668.009 057 602.008
Fig. Elbow pipe SK 50, 3'', 45° 1 Elbow pipe SK 50, 3'', 90° Elbow pipe SK 65, 3'', 45° Elbow pipe SK 65, 3'', 90° 2 Elbow pipe SK 100, 4.5'', 15° Elbow pipe SK 100, 4.5'', 30° Elbow pipe SK 100, 4.5'', 45° Elbow pipe SK 100, 4.5'', 90° 3 Elbow pipe SK 125, 5.5'', 15° Elbow pipe SK 125, 5.5'', 30° Elbow pipe SK 125, 5.5'', 45° Elbow pipe SK 125, 5.5'', 90°
Part no. 081 779.004 081 777.006 057 758.004 057 756.006 057 595.005 057 594.006 057 593.007 421 329 057 598.002 258 935.008 057 596.004 261 402.007
Elbow pipes
1
2
3
MM 2599/11 GB
90
Accessories for fine concrete pumps
www.mortarmachines.com
T-delivery pipes and reduction pieces
3 2
4 1
5
Fig. T-delivery pipe SK 100, 4.5'', 1,000 mm 1 T-delivery pipe SK 125, 5.5'', 1,000 mm 1 Reduction pipe SK 65, 3''- SK 50, 3'', 1,000 mm 2 Reduction pipe SK 100, 4.5''- SK 50, 3'', 1,000 mm 3 Reduction pipe SK 100, 4.5''- SK 50, 3'', 1,500 mm 3 Reduction pipe SK 125, 5.5''- SK 100, 4.5'', 1,000 mm 4 Transmission piece SK 3''/ 2'' IG Transmission piece SK 3''/ 2'' AG 5 Lid for T-delivery pipe 4.5'' 6 Lid for T-delivery pipe 5.5'' 6
Part no. 057 614.009 057 615.008 058 670.000 224 269.009 238 508.002 057 604.006 027 716.005 082 784.001 057 627.009 057 628.008
6
Pressure gauge
Pressure gauge SK 4.5'', 100 bar Pressure gauge SK 5.5'', 100 bar
Part no. 521 430 521 448
Clamp coupling SK 3'' Clamp coupling SK 4.5'' Clamp coupling SK 5.5''
Part no. 417 798 431 613 417 249
Spring cotter
Part no. 018 878.004
Clamp coupling
Spring cotter
91
MM 2599/11 GB
www.mortarmachines.com
Delivery hoses
2
Delivery hose SK 50, 3'', 2,000 mm Delivery hose SK 50, 3'', 4,000 mm Delivery hose SK 50, 3'', 5,000 mm Delivery hose SK 50, 3'', 10,000 mm Delivery hose DN 65, 3'', 5,000 mm Delivery hose SK 100, 4.5'', 3,000 mm Delivery hose SK 100, 4.5'', 4,000 mm Delivery hose SK 100, 4.5'', 5,000 mm Delivery hose SK 100, 4.5'', 6,000 mm Delivery hose SK 125, 5.5'', 2,000 mm Delivery hose SK 125, 5.5'', 3,000 mm Delivery hose SK 125, 5.5'', 4,000 mm Delivery hose SK 125, 5.5'', 5,000 mm Delivery hose SK 125, 5.5'', 6,000 mm
1
3
4
Fig. 1 1 1 1 2 3 3 3 3 4 4 4 4 4
Part no. 481 169 481 170 481 171 481 172 057 886.002 253 319.001 083 389.007 057 609.001 027 623.004 027 643.000 433 497 089 983.009 057 612.001 057 613.000
End hose SK 50, 3'', 6,000mm End hose SK 65, 3'', 5,000 mm End hose SK 100, 4.5'', 2,850 mm End hose SK 125, 5.5'', 3,000 mm Support holder for end hose SK 100, 4.5'' Support holder for end hose SK 125, 5.5''
Part no. 292 067.000 404 454 233 647.007 233 649.005 054 370.003 054 371.002
Rubber seal DN 65, DN 50, 3'' Rubber seal DN 100, 4.5'' Rubber seal DN 125, 5.5''
Part no. 064 084.004 057 341.000 055 559.001
Rubber seals
MM 2599/11 GB
92
Accessories for fine concrete pumps
www.mortarmachines.com
Concrete spray nozzles
Plastic concrete spray nozzles ID V 50 mm, 1 air tap, 1 tap accessory, 30 mm nozzle diameter, Weight: 3,5 kg
Part no. 072 157.004
High-pressure concrete spray nozzles
With rubber nozzle 2 ", ET Concrete spray nozzle
Part no. 532 589 532 590
For cleaning delivery hoses
1
Fig. Sponge rubber ball D 60, hard 1 Sponge rubber ball D 70, hard 1 Sponge rubber ball D 80, hard 1 Sponge rubber ball D 120 1 Sponge rubber ball D 150, hard 1 Sponge rubber ball D 150, medium 1 Catch basket for Sponge rubber ball, 4.5'' 2 Catch basket for Sponge rubber ball, 5.5'' 2 Wash-out adaptor SK 4.5'', for cleaning with compressed air Wash-out adaptor SK 5.5'', for cleaning with compressed air
Part no. 000 212.005 258 320.008 000 246.000 016 091.003 223 673.007 018 841.002 276 715.006 276 593.008 057 616.007 057 617.006
2
3
4 Additional accessories
Fig. Pipe clamp for wall or floor, DN 100 3 Pipe clamp for wall or floor, DN 125 3 Air hose 3/4'', 20 m PM hose caddy 4 PM pump aid, 18 l storage tank, 25 pcs 5
Part no. 052 930.005 051 038.005 416 015 482 464 266 743.004
5
93
MM 2599/11 GB
www.mortarmachines.com
Accessories for fine concrete pumps Flat gate valves GVM GVM (gate valve manual) Flat gate valves are simple gate valves. They are opened and closed manually, i.e. using a hammer. They are available for low pressure requirements of up to 20 bar and for high pressure requirements of up to 130 bar.
Manual gate valve GVM 2/2, 130 bar, SK 125, 5.5'' Manual gate valve GVM 2/2, 130 bar, SK 100, 4.5''
Part no. 413 087 222 362.005
Rotary distributors Rotary distributors are ideal for the simple and flexible delivery and distribution of fine concrete at construction sites. There are 3 different rotary distributor sizes to meet different site conditions.
RV 0
The RV 0 is the smallest rotary distributor in the range. It is particularly suited to cramped construction sites. It consists of a stable hinge to which hoses can be connected if necessary. Part no. 500 570
RV 7
The RV 7 is suitable for smaller construction sites on roofs or for the concreting of pillars. The RV 7 is stabilised by 6 individual weights which can be removed when it is transported. Part no. 455 597
MM 2599/11 GB
94
www.mortarmachines.com
Accessories for fine concrete pumps
RV 10 in transport position
RV 10
The RV 10 is a flexible rotary distributor which is ideal for large areas and roofs. Large areas of up to 320 m2 can be concreted from a single position. Part no. 426 078
Technical Data: Type
Pipe delivery line Arms Pipe - ID
RV 0 RV 7 RV 10
125 125 125
Accessories RV 10
0 2 2
Reach (m)
Concreting area (m2)
Transp. dimensions L x W x H (m)
Weight (kg)
Part no.
0 6.58 10
- 132 320
0,8 x 0,5 ø 4.2 x 0.6 x 0,8 7.10 x 1.03 x 1.76
40 610 1,020
500 570 455 597 426 078
Underlay plate, 1 Set, 4 Pieces
Part no. 481 026
95
MM 2599/11 GB
www.mortarmachines.com
Accessories for plastering machines Bore
PM Mixer pumps rotors / stators
Bore/ Groove
Groove
Nut
Rule of thumb: The finer the particle size and the softer the material to be pumped, the harder the required rubber quality for the stator.
d1
the required rubber quality.
Diameter d2
Pitch s (mm)
The grainier the material and the harder the aggregate, the softer
m) Stator length l1 (m m) Rotor length l2 (m
Mixer pumps MP 25 MIXIT
Model D4 1/4 D4 1/4 D4 1/2 D4 1/2 D4 D4 D5 short D6 Twin D6 Power D6 CP D6-3 D6-3 D6-3 Action D7-2 D8-2
l/min at 100 rpm** Colour (75 % sphere)
6 6 12 12 20 20 40 25 25 25 25 25 25 35 40
2.5 2.5 4.5 4.5 5.5 5.5 7.8 6.5 6.5 6.5 6.5 6.5 6.5 9.0 8.8
white black green black red yellow brown white red silver orange blue orange red black
Hard- ness (° Shore)
Max. Pump Length / ø Length Rotor grain size pressure stator (mm) without pin (mm) (mm) (bar)
70 65 70 65 72 50 72 73 73 73 73 73 73 73 65
3 3 3 3 4 4 4 4 4 4 4 4 4 4 4
40 30 40 30 20 20 20 40 40 40 40 40 40 40 30
270/ 90 270/ 90 270/ 90 270/ 90 270/ 90 270/ 90 270/ 90 270/ 90 270/ 90 270/ 90 270/ 90 270/ 90 270/ 90 270/ 90 270/ 90
320 320 320 320 320 320 320 320 320 320 320 320 320 320 320
Version Rotorhead Groove Groove Groove Groove Groove Groove Groove Groove Groove Groove Groove Groove Groove Groove Groove
Mixer pumps MP 25 FMP 60
Model R8 1.5
Output (l/ min)
Output (l/ min) 80
l/min at 100 rpm** Colour (75 % sphere)
78
black
Hard- ness (° Shore) 74
Max. Pump Length / ø Length Rotor grain size pressure stator (mm) without pin (mm) (mm) (bar) 4 15 270/113 320
Hard- ness (° Shore) 73 68 73
Max. Pump Length / ø Length Rotor grain size pressure stator (mm) without pin (mm) (mm) (bar) 5 30 269 / 86 312 5 30 135 / 65 185 5 30 269 / 86 312
Version Rotorhead Groove
Worm pump Strobot 406 S
Model
Output
(l/ min)
EW 40 15 EW 40 short 15 EW 40 15
MM 2599/11 GB
l/min at 100 rpm** Colour (75 % sphere)
7 7 7
yellow yellow yellow
96
Version Rotorhead Nut Nut Nut
Accessories for plastering machines
www.mortarmachines.com
D 4 1/2
D 5 short
D 4 1/4
Stator Part no.
Rotor Part no.
Clamping jacket Part no.
214 573.006 402 321 214 403.008 403 523 010 316.001 010 313.004 071 011.002 406 978 206 345.006 403 146 473 639 492 020 482 672 485 478 436 746
214 572.007 214 572.007 214 402.009 214 402.009 207 140.006 207 140.006 071 234 009 443 740 443 740 443 740 473 638 473 638 473 638 485 479 436 743
maintenance-free 208 129.000 maintenance-free 208 129.000 208 128.001 208 128.001 208 128.001 maintenance-free maintenance-free maintenance-free maintenance-free 208 129.000 maintenance-free maintenance-free maintenance-free
Stator Part no.
Rotor Part no.
Clamping jacket Part no.
501 062
500 850
Stator Part no.
Rotor Part no.
463 793 531 512 463 793
506 909 470 365 463 797***
D 6-2
400 912 400 912 400 913 400 913 – – 400 910 400 911 400 911 400 911 487 115 487 115 487 115 – 436 744
maintenance-free
Clamping jacket Part no.
maintenance-free maintenance-free maintenance-free
Assembly aid for rotor-stator Silicone spray, 400 ml spray can
= standard equipment
Part no. 508 975
*needs conversion **depending on material, consistence, delivery range and pressure *** stainless steel, hard chrome plated 97
MM 2599/11 GB
www.mortarmachines.com
N13 S
N13 S
D 6-3
Output
(l/min)
16
l/min at 100 rpm** Colour (75 % sphere)
3,8
Hard- ness
Max. Pump Length / ø Length Rotor Version grain size pressure stator (mm) without pin (mm) Rotorhead (mm) (bar) 4 30 160/60 206 Groove
(° Shore)
grey
73
Worm pump Sprayboy P 12
Model D4 1/4 D4 1/4 D4 1/2 D4 1/2 D4 D4 D5 short
D 6 Power
Mixer pumps MP 10, MP 12
Model
D 6 CP
Output (l/min) 1.5 + 3 1.5 + 3 2.5 + 5 2.5 + 5 3.5 + 7.5 3.5 + 7.5 6 + 12
l/min at 100 rpm** Colour (75 % sphere)
2.5 2.5 4.5 4.5 5.5 5.5 7.8
Hard- ness
Max. Pump Length / ø Length Rotor Version grain size pressure stator (mm) without pin (mm) Rotorhead (mm) (bar) 3 40 270 / 90 320 Groove 3 30 270 / 90 320 Groove 3 40 270 / 90 320 Groove 3 30 270 / 90 320 Groove 4 20 270 / 90 320 Groove 4 20 270 / 90 320 Groove 4 20 270 / 90 320 Groove
(° Shore)
white black green black rod yellow brown
70 65 70 65 72 50 72
Worm pump Sprayboy P 12 230 V
Model
Output
(l/min)
D4 D4
MM 2599/11 GB
4.5 4.5
l/min at 100 rpm** Colour (75 % sphere)
5.5 5.5
Hard- ness
Max. Pump Length / ø Length Rotor Version grain size pressure stator (mm) without pin (mm) Rotorhead (mm) (bar)
(° Shore)
red yellow
72 50
4 4
98
20 20
270 / 90 270 / 90
320 320
Groove Groove
Accessories for plastering machines
www.mortarmachines.com
D 6-3 Action
D 6 Twin
D 6-3 blue
Stator Part no.
Rotor Part no.
Clamping jacket Part no.
506 905
506 867
Stator Part no.
Rotor Part no.
Clamping jacket Part no.
214 573.006 402 321 214 403.008 403 523 010 316.001 010 313.004 071 011.002
214 572.007 214 572.007 214 402.009 214 402.009 207 140.006 207 140.006 071 234 009
maintenance-free 208 129.000 maintenance-free 208 129.000 208 128.001 208 128.001 208 128.001
Stator Part no.
Rotor Part no.
Clamping jacket Part no.
010 316.001 010 313.004
207 140.006 207 140.006
= standard equipment
–
208 128.001 208 128.001
99
**depending on material, consistence, delivery range and pressure
MM 2599/11 GB
www.mortarmachines.com
D 6 Power
D 4 yellow
D 8-2
Worm pump S 5 (with screwed cardan shaft)
Model
Output
(l/min)
2L6 D6 Power* D8-2* 2L6 2L6 2L74 2L88 2L88* 2L88 2L54*
D 4 red
7 - 40 3 - 18 4 - 23 7 - 40 7 - 40 150 8 - 55 8 - 55 8 - 55 8 - 55
l/min at 100 rpm** Colour (75 % sphere)
17 6,5 8,8 17 17 63 21 21 21 24
Hard- ness
(° Shore)
yellow red black yellow yellow blue brown brown brown grey
Max. Pump Length / ø Length Rotor Version grain size pressure stator (mm) without pin (mm) Rotorhead (mm) (bar)
73 73 65 73 63 55 72 72 72 55
6 4 4 6 6 8 6 6 6 10
40 40 30 25 25 20 25 25 25 25
540 / 100 270 / 90 270 / 90 540 / 100 540 / 100 670 / 124 540 / 100 540 / 100 540 / 100 535 / 124
620 320 320 620 620 620 620 620 620 620
Groove/ Bore Groove Groove Bore Bore Bore Bore Groove Bore Groove
Worm pump S 5 (with plugged cardan shaft)
Model
Output
(l/min)
D5* D6 Power* D8-2* 2L54 2L6 2L6 2L6 2L88 1,5L74 2L6
MM 2599/11 GB
3 - 18 3 - 18 4 - 23 8 - 55 4 - 40 4 - 40 4 - 40 6 - 55 170 7 - 40
l/min at 100 rpm** Colour (75 % sphere)
6,5 6,5 8,8 24 17 17 17 21 63 17
Hard- ness
(° Shore)
red red black grey yellow yellow yellow brown green yellow
Max. Pump Length / ø Length Rotor Version grain size pressure stator (mm) without pin (mm) Rotorhead (mm) (bar)
73 73 65 55 50 50 63 50 55 73
4 4 4 10 6 6 6 6 8 6
100
40 40 30 25 25 25 25 20 15 40
270 / 90 270 / 90 270 / 90 535 / 124 540 / 100 540 / 100 540 / 100 540 / 100 517 / 124 540 / 100
320 320 320 620 620 620 620 620 596 620
Groove Groove Groove Groove Groove 16 Groove 16 Groove 16 Groove 16 Groove 16 Groove/ Bore
Accessories for plastering machines
www.mortarmachines.com
2L88
2L6
2L6 maintenance free
Stator Part no.
Rotor Part no.
Clamping jacket Part no.
211 355.007 206 345.006 436 746 211 355.007 430 837 213 018.009 203 509.007 203 509.007 203 509.007 523 235
521 150 443 740 436 743 201 111.002 201 111.002 206 395.001 422 650 211 815.000 203 511.008 211 739.005
010 433.007 maintenance-free maintenance-free 010 433.007 maintenance-free integrated 010 433.007 010 433.007 010 433.007 integrated
Stator Part no.
Rotor Part no.
Clamping jacket Part no.
206 345.006 206 345.006 436 746 523 235 211 355.007 213 390.002 430 837 203 509.007 213 027.003 211 355.007
443 740 443 740 436 743 211 739.005 211 814.001 211 814.001 211 814.001 211 815.000 213 028.002 521 150
maintenance-free maintenance-free maintenance-free integrated 010 433.007 integrated maintenance-free 010 433.007 integrated 010 433.007
101
Clamping jacket
= standard equipment
*needs conversion **depending on material, consistence, delivery range and pressure
MM 2599/11 GB
www.mortarmachines.com
2L54
2L74
Worm pumps SP 11 BMR, BMB, BMT, BBR
Model
Output
(l/min)
2L6 2L6 2L6 2L88 1,5L74 2L6
l/min at 100 rpm** Colour (75 % sphere)
4 - 40 4 - 40 4 - 40 6 - 55 170 7 - 40
17 17 17 21 63 17
Hard- ness
(° Shore)
yellow yellow yellow brown green yellow
Max. Pump Length / ø Length Rotor Version grain size pressure stator (mm) without pin (mm) Rotorhead (mm) (bar)
50 50 63 50 55 73
6 6 6 6 8 6
25 25 25 20 15 40
540 / 100 540 / 100 540 / 100 540 / 100 517 / 124 540 / 100
620 620 620 620 596 620
Groove 16 Groove 16 Groove 16 Groove 16 Groove 16 Groove/ Bore
Worm pumps SP 11 BHF
Model
2L54* 2L54* 2L74 2L74* 2L75 2L75*
2L75
Output (l/min)
l/min at 100 rpm** Colour (75 % sphere)
0 - 105 0 - 105 0 - 200 0 - 200 0 - 200 0 - 200
24 24 45,8 45,8 75 75
Hard- ness
(° Shore)
grey silber blue blue grey grey
Max. Pump Length / ø Length Rotor Version grain size pressure stator (mm) without pin (mm) Rotorhead (mm) (bar)
55 72 55 72 55 55
10 8 8 8 8 8
25 25 25 25 20 20
535 / 124 535 / 124 670 / 124 670 / 124 670 / 124 670 / 124
620 620 746 746 746 746
Groove 16 Groove 16 Bore Groove 16 Bore Groove 16
Worm pumps SP 11 BUR
Model
2L6 2L6 2L6 2L88 1,5L74 2L54 2L54 2L74 2L75
MM 2599/11 GB
Output (l/min) 4 - 40 4 - 40 4 - 40 6 - 55 170 8 - 55 8 - 55 0 - 200 0 - 200
l/min at 100 rpm** Colour (75 % sphere)
17 17 17 21 63 24 24 45,8 75
Hard- ness
(° Shore)
yellow yellow yellow braun green grey silver blue grey
Max. Pump Length / ø Length Rotor Version grain size pressure stator (mm) without pin (mm) Rotorhead (mm) (bar)
50 50 63 50 55 55 72 72 55
6 6 6 6 8 10 8 8 8 102
25 25 25 20 15 25 25 25 20
540 / 100 540 / 100 540 / 100 540 / 100 517 / 124 535 / 124 535 / 124 670 / 124 670 / 124
620 620 620 620 596 620 620 746 746
Groove 16 Groove 16 Groove 16 Groove 16 Groove 16 Groove 16 Groove 16 Groove 16 Groove 16
Accessories for plastering machines
www.mortarmachines.com
2L88
2L6 maintenance free
2L6
Stator Part no.
Rotor Part no.
Clamping jacket Part no.
211 355.007 213 390.002 430 837 203 509.007 213 027.003 211 355.007
211 814.001 211 814.001 211 814.001 211 815.000 213 028.002 521 150
010 433.007 integrated maintenance-free 010 433.007 integrated 010 433.007
Stator Part no.
Rotor Part no.
Clamping jacket Part no.
523 235 211 738.006 206 396.000 213 018.009 487 262 502 911
211 739.005 211 739.005 206 395.001 212 506.004 487 261 500 516
Stator Part no.
Rotor Part no.
211 355.007 213 390.002 430 837 203 509.007 213 027.003 523 235 211 738.006 213 018.009 502 911
211 814.001 211 814.001 211 814.001 211 815.000 213 028.002 211 739.005 211 739.005 212 506.004 500 516
Clamping jacket
= standard equipment
integrated integrated maintenance-free integrated maintenance-free integrated
Clamping jacket Part no.
010 433.007 integrated maintenance-free 010 433.007 integrated integrated integrated integrated maintenance-free 103
*needs conversion **depending on material, consistence, delivery range and pressure
MM 2599/11 GB
www.mortarmachines.com
2L74
2L54
Worm pump SP 20
Model
7515 2L8
3L7
Output l/min at 100 rpm** (l/min) (75 % sphere) 5 - 250 83 8 - 400 150
Colour
white white
Hard- ness
(° Shore)
Max. Pump Length / ø Length Rotor grain size pressure stator (mm) without pin (mm) (mm) (bar)
63 63
8 10
35 25
500 / 159 650 / 194
623 740
Version Rotorhead hexagonal hexagonal
Other worm pumps
Model
1L6 2L4 2L4 2L4 D3 D3 D5* 3L7 3L7 3D7 2L6 2L88 2L88 2L74 2D8 1,5L8
MM 2599/11 GB
Output l/min at 100 rpm** (l/min) (75 % sphere) SP 5 14,8 P4 5,3 P4 5,3 P4 5,3 TS3 10 TS3 10 MS-x, S 5 12 17 SP 11 BUR 17 SP 11 BUR UMP 17 FMP 17 FUMP 70 21 UMP 21 P11SDVF 63 45,9 FUMP, SP 11 E S8 123
Colour
yellow yellow red green rot green brown yellow yellow red yellow brown brown blue red yellow
Hard- ness
(° Shore)
Max. Pump Length / ø Length Rotor grain size pressure stator (mm) without pin (mm) (mm) (bar)
50 50 72 72 72 72 65 50 75 71 50 50 50 55 72 50
6 4 4 4 4 4 4 6 6 6 6 6 6 8 4 10
104
15 20 25 25 25 25 20 40 40 40 25 25 25 25 25 15
270 / 100 360 / 75 360 / 75 360 / 75 315 / 70 315 / 70 350 / 90 534 / 100 534 / 100 534 / 100 540 / 100 540 / 100 540 / 100 670 / 124 600 / 145 660 / 190
350 407 407 407 379 379 400 620 620 620 620 620 620 620 570 747
Version Rotorhead Groove S16 Groove Groove Groove Groove Groove Groove Groove 16 Groove 16 Groove 16 Groove 12 Groove 14 Bore Bore Groove Bore
Accessories for plastering machines
www.mortarmachines.com
2L75
2L8
2L88
Stator Part no.
Rotor Part no.
Clamping jacket Part no.
525 052 H7000 508 312
433 023 H7000 508 021
Stator Part no.
Rotor Part no.
Clamping jacket Part no.
214 536.001 010 325.005 010 326.004 010 677.009 072 996.003 201 175.006 070 352.005 213 638.007 211 503.008 208 276.005 211 355.007 203 509.007 203 509.007 206 396.000 208 537.003 070 162.004
214 537.000 010 321.009 010 321.009 010 321.009 072 997.002 072 997.002 070 351.006 211 278.003 211 278.003 208 263.005 010 628.003 208 316.004 422 650 206 395.001 208 467.005 200 770.004
422 747 010 329.001 010 329.001 010 329.001 073 487.003 073 487.003 206 848.008 maintenance-free maintenance-free maintenance-free 010 433.007 010 433.007 010 433.007 maintenance-free maintenance-free 073 827.003
maintenance-free maintenance-free
105
*needs conversion **depending on material, consistence, delivery range and pressure
MM 2599/11 GB
www.mortarmachines.com
In-line Mixer
1
Uni in-line mixer (Fig. 1) (Accessories: see rotors with pins) Cross shaped mixing paddle (for uni in-line mixer) 2 x collar nuts PM-coupling V 35 / 25-40 reduced Pressure gauge 0-60 bar for hoses DN 25-40 Pressure gauge 0-60 bar for hoses DN 35-40
Part no. 400 566 400 580 208 801.001 207 795.008 214 570.009 472 506
Pressure gauge, pressure control device, T-piece
Pressure gauge for ID 50 with coupling V 50 / grease buffer, 0-6 bar with coupling V 50 / grease buffer, 0-10 bar with coupling V 50 / grease buffer, 0-25 bar with coupling V 50 / grease buffer, 0-40 bar, ø 60 mm with coupling V 50 / grease buffer, 0-100 bar T-piece to pressure gauge ID 50 mm
Part no. 011 729.008 011 730.000 426 387 420 989 426 388 071 554.006
Pressure control device and pressure gauge Pressure control device cpl. with grease buffer 2-32 bar Protective cap for pressure gauge NG 100 Air-testing pressure gauge 1”, T-piece 0-6 bar Testing pressure gauge with 1” hose tap ID 25 Testing pressure gauge with 1” hose tap ID 25-40 Pressure gauge 0-60 bar for hoses DN 25-40 Pressure gauge 0-60 bar for hoses DN 35-40
011 757.009 001 252.006 001 160.004 014 375.006 208 745.002 214 570.009 472 506
PM hose holder made of leather
Part no. 000 206.008
For attaching hoses
MM 2599/11 GB
106
Accessories for plastering machines
www.mortarmachines.com
Mortar hoses with bayonet connections
1 D iameter 13 mm 13 mm 13 mm
2
Length 1 m 15 m 20 m
Fig. 1 1 1
Part no. 470 485 462 718 462 707
Diameter 19 mm 19 mm 19 mm 19 mm 19 mm
Length 1,5 m 3 m 7,5 m 10 m 15 m
Fig. 2 2 2 2 2
Part no. 470 460 468 846 470 484 483 962 470 458
25 mm 25 mm
10 m 15 m
2 2
476 045 476 046
Mortar hoses with locking bayonet connections
107
MM 2599/11 GB
www.mortarmachines.com
Mortar hoses up to 40 bar operating pressures (yard wear)
Part no. 001 602.009 531 324 001 603.008 531 326 501 913 531 327
ID 25 mm, yard ware 25 x 7 mm, as of 40 m roll ID 25 mm, yard ware 25 x 7 mm, as of 40 m roll (white) ID 35 mm, yard ware 35 x 8 mm, as of 40 m roll ID 35 mm, yard ware 35 x 8 mm, as of 40 m roll (white) ID 50 mm, yard ware 50 x 9 mm, as of 40 m roll ID 50 mm, yard ware 50 x 9 mm, as of 40 m roll (white)
Mortar hoses cpl. with couplings, ID 20, V 25-40 Geka
40 bar, 20 x 7 mm, length 10 m
Part no. 211 508.003
Mortar hoses cpl. with couplings, ID 25, 40 bar, M 25-40, V 25-40
6
Fig. 40 bar, 25 x 7 mm, length 5 m 6 40 bar, 25 x 7 mm, length 10 m 6 40 bar, 25 x 7 mm, length 15 m 6 40 bar, 25 x 7 mm, length 20 m 6 40 bar, 25 x 7 mm, length 20 m (white)
Part no. 207 803.000 207 804.009 211 966.001 207 806.007 531 341
Individual items for retrofitting* Coupling V 25-40 / S 25 Coupling M 25-40 / S 25 ID 25 yard ware 25 x 7 mm 4x hose clamp, NW 25, B 200 E Seal for coupling
208 828.000 211 593.005 001 602.009 002 337.001 207 764.000
1 2 3 4 5
* Does not correspond to original/only for repair M = female part V = male part S = nozzle pipe
MM 2599/11 GB
108
Accessories for plastering machines
www.mortarmachines.com
Mortar hoses complete with couplings, ID 25, 40 bar, V 35, V 25-40
5
40 bar, 25 x 7 mm, length 5 m 40 bar, 25 x 7 mm, length 10 m
Fig. 5 5
Part no. 207 808.005 207 809.004
Individual items for retrofitting* Coupling V (a) V 25-40 / S 25 Coupling V (b) V 35 / S 25 ID 25 yard ware 25 x 7 mm 4x Hose clamp ID 35, D 250 e
2a 2b 3 4
208 828.000 214 800.009 001 602.009 002 337.001
* Does not correspond to original/only for repair
Mortar hoses complete with couplings, ID 35, 40 bar, M 35, V 35
6
Fig. 40 bar, 35 x 8 mm, length 2 m 6 40 bar, 35 x 8 mm, length 13.3 m 6 40 bar, 35 x 8 mm, length 20 m 6 40 bar, 35 x 8 mm, length 13.3 m (white)
Part no. 070 335.006 207 615.007 209 950.003 531 340
Individual items for retrofitting* Coupling M 35 / S 35 1 Coupling V 35 / S 35 2 ID 35, 35 x 8 mm, yard ware 3 4x Hose clamp ID 35 B 250 e 4 Sealing for coupling 5
211 594.004 206 606.004 001 603.008 002 331.007 213 725.004
* Does not correspond to original/only for repair
109
MM 2599/11 GB
www.mortarmachines.com
Mortar hoses complete with couplings, ID 35, 40 bar, M 35, V 50
6
Fig. 40 bar, 35 x 8 mm, length 13.3 m 6
Part no. 207 616.006
Individual items for retrofitting* Coupling M 50 / S 50 1 Coupling V 50 / S 35 2 ID 35, 35 x 8 mm, yard ware 3 4x Hose clamp ID 35 B 250 e 4 Sealing for coupling 5
211 594.004 207 621.004 001 603.008 002 331.007 213 725 004
* Does not correspond to original/only for repair
Mortar hoses complete with couplings, ID 50, 40 bar, M 50, V 50,
6
Fig. 40 bar, 50 x 9 mm, length 13.3 m 6 40 bar, 50 x 9 mm, length 20 m 6 40 bar, 50 x 9 mm, length 13.3 m (white) 40 bar, 50 x 9 mm, length 20 m (white) Individual items for retrofitting* Coupling M 50 / S 50 1 Coupling V 50 / S 50 2 ID 50, 50 x 9 mm, yard ware 3 4x Hose clamp ID 50 B 250 e 4 Sealing for coupling 5
Part no. 501 914 501 915 531 330 531 331
211 595.003 206 604.006 501 913 001 046.005 213 266.000
* Does not correspond to original/only for repair M = female part V = male part S = nozzle pipe
MM 2599/11 GB
110
Accessories for plastering machines
www.mortarmachines.com
Putzmeister couplings for mortar hoses with 25-50 mm ID
1
2
3
4
5
M 25-40 / RI 1”
Fig. 1
Part no. 211 597.001
M 35 / RI 1” M 35 / RI 11⁄2” M 50 / RI 2” M 35 / RA 1 1⁄2” M 50 / RA 2”
2 2 2 2 2
211 598.000 211 599.009 211 600.008 070 315.000 211 848.006
V 25-40 / RI 1” V 25-40 / RI 1 1⁄2” V 35 / RI 1” V 35 / RI 1” plastic V 35 / RI 1 1⁄2” V 35 / RI 2” V 35 / RI 5⁄4” V 50 / RI 2” V 50 / RI 1” V 50 / RI 21⁄2”
3 3 3 3 3 3 3 3 3 3
207 763.001 207 813.003 207 618.004 203 135.002 070 316.009 208 453.006 207 635.003 205 273.001 207 629.006 210 793.000
M 25-40 / S 25 M 35 / S 35
4 5
211 593.005 211 594.004
M 50 / S 50
6
211 595.003
V 25-40 / S 25 V 35 / S 25
7 8
208 828.000 214 800.009
V 35 / S 35
8
206 606.004
V 50 / S 50 V 50 / S 35
9 9
206 604.006 207 621.004
V 35-V 25 / 40 reduced V 25-Geka V 35-Geka
11 10 10
207 795.008 531 291 531 288
M 25 / 40-V 25
11
208 838.003
V 50 - M 35 reduced M 50 - V 35 reduced
12 12
213 217.004 211 290.007
V 50 Dummy lid
13
208 454.005
6
7
8
9
10
11
12
13
111
MM 2599/11 GB
www.mortarmachines.com
Rotary feedthrough
M 25-40 / RI 1” aluminium coupling cpl.
Part no. 403 330
Hose nozzles with thread for mortar hoses with 20-50 mm ID
S-nozzle pipe 20 mm RA 1” S-nozzle pipe 25 mm RA 1” S-nozzle pipe 35 mm RA11⁄2” S-nozzle pipe 50 mm RA 2”
Part no. 211 536.004 205 464.001 205 465.000 205 466.009
ID 25-40 mm, 42 x 27 x 6 mm ID 35 mm, 54 x 37 x 6 mm ID 50 mm, 67 x 51 x 6 mm
Part no. 207 764.000 213 725.004 213 266.000
ID 1⁄2“ mm, for air hose B17 Oe. ID 25 mm, for mortar hose B20 Oe. ID 35 mm, for mortar hose B25 Oe. ID 50 mm, for mortar hose B25 Oe. ID 65 mm, 2-pieces, for mortar hose B25 ID 90 mm, for mortar hose ID 98 mm, for suction hose
Part no. 002 333.005 002 337.001 002 331.007 001 046.005 015 288.008 016 337.000 002 247.007
Sealing rings
Hose clips
Cam levers
Cam lever, reinforced, forged steel Heavy duty shaft dowel pins with reinforcement: (10 each in a set) – for 35 and 25 M-Teil, Gr. 6 / 30 and 3.5 / 30 – for 50 M-part, size 6 / 40 and 3.5 / 40 Shaft dowel pin for 25 and 35 6 x 28 Shaft dowel pin for 25-40 6 x 30 Shaft dowel pin for 50 6 x 36 Safety ring for cam lever
MM 2599/11 GB
112
Part no. 211 535.005 441 055 441 056 211 613.008 211 609.009 211 610.001 001 698.000
Accessories for plastering machines
www.mortarmachines.com
Water air-hose 3⁄4” Part no. 210 789.001
Water air-hose, GEKA-coupling 3⁄4” ID, length 40 m Spray nozzle, GEKA-coupling 1⁄2” ID, lockable
042 419.002
Air hose 1⁄2”
Coupling GEKA 1⁄2” ID GEKA 1⁄2” ID GEKA 1⁄2” ID GEKA 1⁄2” ID GEKA 1⁄2” ID
Length 10 m 15 m 20 m 30 m 40 m
Diameter 10 mm 10 mm 10 mm 10 mm
Length 10 m 15 m 25 m 25 m (with intermediate coupling at 18.5 m)
Part no. 001 682.003 212 333.002 001 665.004 202 911.007 214 734.007
Air hoses EWO
113
Part no. 463 791 480 373 462 721 470 489
MM 2599/11 GB
www.mortarmachines.com
EWO coupling
Part no. 213 269.007
RA 1⁄2”
GEKA quick-couplings for water- and air hoses 3⁄8”-1” ID
S = nozzle pipe RA = external thread RI = internal thread
Part no. 413 895 002 313.009 018 535.004 002 312.000 001 387.007 001 390.007 041 403.006 001 386.008 062 815.000 062 861.009 014 068.009 062 621.003 002 311.001 001 391.006 062 622.002 424 458
Seal, GEKA plus Seal S 3⁄8” S 1⁄2” S 3⁄4” S 1” RA 3⁄8” RA 3⁄4” RA 1” RA 11⁄4” RA 1⁄2” RI 1⁄2” RI 3⁄4” RI 1” RI 11⁄4” RI 3⁄8”
Hose clip
Width 8.1 mm 14.3 mm 14.3 mm 12.0 mm 12.0 mm 12.2 mm
MM 2599/11 GB
Hose external ø 6-16 mm ø 32-50 mm ø 40-60 mm ø 20-32 mm ø 57 mm ø 44-56 mm
114
Part no. 002 333.005 002 332.006 002 334.004 001 422.001 001 433.003 001 421.002
Accessories for plastering machines
www.mortarmachines.com
Hose connectors for mortar hose wih air hose
ø 25 mm hose with ø 13 mm hose, plastic clamp – black – (Illustrations may differ from the original)
Hose clamps for air hoses
Width 8 mm 8 mm 8 mm
Part no. 214 579.000
Hose external ø 15-17 mm ø 17-20 mm ø 20-23 mm
Part no. 002 328.007 002 329.006 002 330.008
Sponge rubber balls for cleaning the delivery hoses for delivery hose ID 13 mm, ø 19 mm for delivery hose ID 18 mm, ø 20 mm for delivery hose ID 20 mm, ø 25 mm for delivery hose ID 25 mm, ø 30 mm for delivery hose ID 35 mm, ø 45 mm for delivery hose ID 50 mm, ø 60 mm
115
Part no. 470 376 429 483 429 485 000 239.004 065 044.001 000 212.005
MM 2599/11 GB
www.mortarmachines.com
Fine plaster spray gun, small (for Strobot 406 S)
1
Fig. Fine plaster spray gun, small, with 6.5 mm diameter 1 and 8 mm diameter nozzle, with bayonett connection Fine plaster spray gun, small, without nozzles Fine plaster spray gun, small, short, without nozzles Fine plaster spray gun, small, without nozzles, 2 with PM-coupling
Part no. 463 733 463 859 470 381 531 472
2
3
Nozzle diameter 3 mm (for 0.3 mm granulation) Nozzle diameter 4 mm (for 0.3 mm granulation) Nozzle diameter 5 mm (for 0.5 mm granulation) Nozzle diameter 6 mm (for 1 mm granulation), hardened Nozzle diameter 6,5 mm (for 1.5 mm granulation) Nozzle diameter 8 mm (for 2 mm granulation), hardened Nozzle diameter 8 mm (for 2 mm granulation) Nozzle diameter 10 mm (for 3 mm granulation)
470 382 470 383 470 384 463 860 470 385 463 861 470 386 462 703
Jet drill bit, diameter 2.2 mm with holder Jet drill bit, diameter 2.2 mm
470 387 470 388
Elbow joint, small 3 Extension for fine plaster spray gun, 80 cm, GEKA Extension for fine plaster spray gun, 80 cm, PM-coupling Union nut, small Main pipe, small, GEKA Main pipe, small, PM coupling Outer pipe, small Air distributor with O-ring, small
470 181 463 736 531 642 470 576 470 582 531 420 470 578 470 577
Ball valves for spray guns, small (for Strobot 406 S)
1/2“ with start/stop lever for spray gun, small
MM 2599/11 GB
116
Part no. 470 572
Accessories for plastering machines
www.mortarmachines.com
Fine plaster spray gun, large (for Strobot 406 S)
Fig. Fine plaster spray gun, large with 8 mm ø 1 and 10 mm ø nozzle, EWO air connection, bayonett connection Fine plaster spray gun, large, without nozzles Fine plaster spray gun, large, short, without nozzles Fine plaster spray gun, large, without nozzles, 2 with EWO air connection, PM-coupling
1
Part no. 463 778 470 390 470 391 531 475
2 Fine plaster spray gun, large, with nozzles 6.5 mm ø, with Geka air connection, PM-coupling
3
531 475
3
4
Nozzle diameter 6.5 mm (for 1.5 mm granulation) Nozzle diameter 8 mm (for 2 mm granulation) Nozzle diameter 10 mm (for 3 mm granulation) Nozzle diameter 12 mm (for 4 mm granulation) Nozzle diameter 14 mm (for 5 mm granulation) Nozzle diameter 16 mm (for 6 mm granulation)
470 394 470 395 470 397 470 398 470 399 470 400
Jet drill bit, diameter 2.2 mm with holder Jet drill bit, diameter 2.2 mm
470 387 470 388
Elbow joint, large 4 Extension for fine plaster spray gun, 80 cm, GEKA Extension for fine plaster spray gun, 80 cm, PM-coupling Union nut, large Main pipe, large, GEKA Main pipe, large, PM coupling Outer pipe, large Air distributor with O-ring, large
462 960 463 736 531 642 470 595 468 819 531 457 470 597 470 596
Ball valves for spray guns, large (for Strobot 406 S)
1“ with start/stop lever for spray gun, large
117
Part no. 470 593
MM 2599/11 GB
www.mortarmachines.com
Fine plaster spray gun – made of plastic – for ready-mix mortar
Up to grain size 4 mm for all dry ready-mix motar that have to be prepared, e.g. gypsum plaster, lime-cement plasters, etc. Max. throughput 30 l/min, air requirement approx. 200 l/min.
1
3
4
2 ID M 25-40 mm with rotating coupling M 25-40 mm with rotating coupling M 25-40 mm with rotating coupling M 25-40 mm with rotating coupling and angled aluminum head M 25-40 mm with rotating coupling and angled aluminum head V 35 mm V 35 mm
5 Ball valve yes
Air cock 2
–
1
–
1
–
1
–
1
–
1
yes
1
Version short 300 mm short 405 mm long, 1.460 mm long, 770 mm long, 1.185 mm short, 285 mm short, 450 mm
Nozzle ø 14 mm
Weight 2.4 kg
14 mm 14 mm
1.2 kg 1 2.6 kg 1
14 mm
1.2 kg
2
404 479
14 mm
1.5 kg
2
404 361
14 mm
0.6 kg 3
203 054.002
14 mm
0.65 kg
209 174.009
4
Part no. 408 237 402 592 MP 25 Standard 403 812
Plaster nozzles, conical ø 10 mm 12 mm 14 mm 16 mm
Fig. 5
Part no. 521 640 521 641 521 642 521 643
Rubber fine plaster nozzles
ø 8 mm 10 mm 12 mm 14 mm 16 mm
MM 2599/11 GB
Quality-PE Part no. 214 751.006 214 752.005 214 753.004 214 754.003 214 755.002 118
Quality-PU Part no. 417 556 417 974 410 982 417 554 417 555
Accessories for plastering machines
www.mortarmachines.com
Ground plaster spray guns – made of aluminium – for wet mortar, job site mixes
Up to grain size of 8 mm, it can be used for first spray and base coat plasters as well as for rough cast and insulating plasters, mainly suitable for construction site mixes but also for ready-mixed material. Max. throughput up to 40 l/ min, air requirement approx. 200 - 400 l/ min. All 3 spray guns with male coupling 35 mm and 2 air ball valves.
1
2
3
Version short, 185 mm, straight short, 700 mm, angular long, 1,300 mm, angular
Nozzles ø 20 and 16 mm 20 and 16 mm 20 and 16 mm
Weight 1.4 kg 1.5 kg 1.7 kg
Fig. 1 2 3
Part no. 001 306.004 209 307.009 209 308.008
Collar nozzles ø 18 mm 20 mm
Part no. 001 329.007 001 330.009
119
MM 2599/11 GB
www.mortarmachines.com
Spray guns for texture plaster Up to a grain size of approx. 4-6 mm – for mineral spray or dispersion plasters as well as for sealing slurries, fillers, etc. Throughput up to 10 l/ min, air requirement 400-800 l/ min.
ID Nozzles ø M 25 mm 4, 6, 8 mm M 25-40 mm 4, 6, 8 mm
Weight 2.2 kg 2.2 kg
Part no. 071 473.006 208 751.009
Spray nozzles for texture plaster spray gun
ø 4 mm 6 mm 8 mm 9 mm 10 mm
Material nozzles for texture plaster spray gun
ø 12 mm 12 mm
Part no. 000 225.005 000 227.003 000 229.001 000 230.003 000 231.002
Diameter/ Version Air bore holes ø 3 mm – red Air bore holes ø 2 mm – silver
Part no. 206 734.002 206 751.001
Refurbishing spray gun Up to grain size of 6 mm for mineral-based plasters for refurbishing, for concreting with ring nozzle and flexible spray pipe.
MM 2599/11 GB
ID 1”, ø 12 mm nozzle, weight 1.2 kg ID V 35/ RI1”, coupling connection – plastic ID M 25-40/ RI1”, coupling connection
Nozzles Vulkollan ø 15 mm
120
Part no. 207 283.002 203 135.002 211 597.001
207 286.009
Accessories for plastering machines
www.mortarmachines.com
Concrete spray nozzles, plastic
ID V 35 mm V 50 mm
Air cock 1 1
Cock-addit 1 1
Nozzles ø 28 mm 30 mm
Weight 3.0 kg 3.5 kg
1
Part no. 011 780.005 072 157.004
2
Applying nozzles
RI1”/ GEKA Mortar applying nozzle 160 mm
Fig. 1 2
Part no. 071 566.007
Guns for bonding material
ID ID 10 ID 25
1
ID 25 2
Jointing device with tangential sprayhead jointing nozzle, swivel coupling M 25-40 Frame filling unit with ball valve, rotating coupling M 25-40, 20 m el. remote control cable, (for MP, SP 5 + Sprayboy) Remote control cable with plug with binder plug and switch, 20 m long Frame connector filling hose with coupling M 25-40, 30 cm long Electric remote control with on-off switch (binder plug), 60 m Electric remote control cable with plug (binder) for extension 30 m Electric remote control cable with plug (binder) for extension 20 m, 3 x 0,75 Electric remote control cable with plug (binder) for extension 10 m, 3 x 0,75
Fig. 1
Part no. 415 689
2
214 236.000
3
214 254.008 408 373
3
269 446.007
3
211 507.004
3
211 506.005
3
211 505.006
3
121
MM 2599/11 GB
www.mortarmachines.com
Remote control cable + extension (for Strobot 406 S)
Remote control cable with indication lamp Remote control cable with indication lamp Remote control cable with indication lamp Remote control cable with indication lamp Remote control cable with indication lamp Remote control cable with indication lamp Remote control cable with indication lamp (for connecting to the extension) Extension Extension Extension Extension
Part no. 470 358 470 362 470 355 470 350 470 361 472 866 472 127
10 m 13,3 m 16 m 21 m
462 962 475 237 462 719 470 363
Remote control cable with toggle switch (for Strobot 406 S)
For connecting to the remote control cable, with on/off switch
Length 10 m 11 m 13 m 16 m 19 m 21 m 15 cm
Length 15 cm
Part no. 532 602
Adaptor plug (for Strobot 406 S)
For connecting the adhesive gun to the remote control cable
Part no. 482 225
Paint spray gun (for Strobot 406 S)
Paint spray gun incl. nozzle set, diameter 2.2 mm Nozzle-Needle set 1.6 mm consisting of: Needle ø 1.6 mm (Part no. 543 077) + nozzle ø 1.6 mm (Part no. 543 076) Nozzle-Needle set ø 2.2 mm consisting of: Needle ø 2.2 mm (Part no. 543 097) + nozzle ø 2.2 mm (Part no. 543 098) Nozzle-Needle set 2.8 mm consisting of: Needle ø 2.8 mm (Part no. 543 071) + nozzle ø 2.8 mm (Part no. 543 074)
MM 2599/11 GB
122
Part no. 543 004
543 078 543 099 543 079
Accessories for plastering machines
www.mortarmachines.com
Adhesive gun with case
For GEKA* consisting of: cpl. bonding gun, tool case 410, cleaning brush D, grease gun – small, adaptor cable 4P/ plug 2P, with bayonett connection
Part no. 492 340
For PM-coupling* consisting of: cpl. bonding gun, tool case 410, cleaning brush D, grease gun – small, adaptor cable 4P/ plug 2P, with PM-coupling
Part no. 532 534
* exclusively for Strobot 406 S
For PM-coupling consisting of: cpl. bonding gun, tool case 410, cleaning brush D, grease gun – small, adaptor cable 4P/ plug 2P, with PM-coupling
We recommend: Remote control cable 10 m Remote control cable 20 m or Remote control cable 30 m
123
Part no. 408 422
211 507.006 211 506.005 211 505.004
MM 2599/11 GB
www.mortarmachines.com
Lance for primer for absorbent substrates, injection lance, spray gun for primer for absorbent substrates (for Strobot 406 S) 3
1 Fig. Lance for primer for absorbent substrates, 1 1 m length, nozzle no. 2 Nozzle no. 2, 60° Union nut for nozzle no. 2 Seal for nozzle no. 2 Spray gun for primer for absorbent substrates 2 with nozzle no. 2 Injection lance, 16 mm diameter tube, 50 cm length Injection lance, 16 mm diameter tube, 1 m length 3
2
470 405 470 411 470 413 462 717 470 415 470 417
Injection lances Injection lance cpl. with T-piece, pressure gauge Remote control air cock, coupling with nozzle pipe ID 50, Expanding collar D 45 and mounted collar D 38
Part no. 470 364
Part no. 001 128.004
Injection lance as above but without T-piece, w.o. pressure gauge and w.o. remote control cock, conn. V 35 / RI 1”
001 133.002
Expanding collar D 38 Expanding collar D 45
070 344.000 070 345.009
Paint rollers (for Strobot 406 S)
Fig. Paint roller distributor, aluminium, min. 25 cm wide 1 Goldfloor roller, 25 cm wide 2 Karalon roller, 25 cm wide Nylon roller (only for smooth undercoats), 25 cm wide 3 1
Roller extension pipe, 30 cm length Roller extension pipe, 70 - 120 cm length 4 Roller extension pipe, 120 - 210 cm length 3
2 4
MM 2599/11 GB
124
Part no. 462 710 462 711 470 625 462 714
462 708 462 712 470 357
Accessories for plastering machines
www.mortarmachines.com
Compressor, 200 l/min, 400 V / 50 Hz 3-phased, without cut-off (MP serie) Compressor, 200 l/min, 400 V / 50 Hz 3-phased, with cut-off Compressor, 200 l/min, 230 V / 50 Hz 1-phased, with cut-off
Fig. 1
Part no. 481 074
1
487 420
1
481 087
1
Compressor HANDY, 250 l/ min, 400 V/ 50 Hz, 3-phased Compressor HANDY, 250 l/ min, 230 V/ 50 Hz, 1-phased
Fig. 2
Part no. 000 235.008
2
000 215.002
Coupling 1⁄4” GEKA (*)
Fig.
Part no. 207 969.009
2
(*) is required if compressor is not used in connection with mixer pump.
Compressor V-MEKO 400, 360 l/min, 3 400 V / 50 Hz with pressure switch-off Compressor V-MEKO 400, 360 l/min, 3 400 V / 50 Hz without pressure switch-off Compressor 590 l/min, 10 bar, 3 kW, 3 2 x 10 l air accumulator Compressor V-MEKO, 360 l/min, 3 1 x 220 V / 50 Hz Compressor V-MEKO, 360 l/min, 3 1 x 220 V / 50 Hz, with pressure switch-off Compressor V-MEKO, 360 l/min, 3 3 x 380 V / 50 Hz Compressor V-MEKO, 360 l/min, 3 3 x 220 V / 60 Hz Compressor V-MEKO, 360 l/min, 3 3 x 380 V / 60 Hz, with pressure switch-off
3
125
400 168 205 767.009 213 264.002 205 768.008 464 452 213 271.008 210 072.006 462 267
MM 2599/11 GB
www.mortarmachines.com
hopper guns with accessories
Hopper gun cpl. with air hose in box Hopper gun without hose and packaging Air hose with EWO plug coupling, 10 m Air hose with EWO plug nipple/ GEKA coupling Holder for hopper gun Corner piece
Part no. 207 307.001 210 014.006 209 345.003 207 958.007 206 766.009 001 430.006
Wear parts kit
Part no. 210 199.002
consisting of: Pressure spring (2 pieces) Hose clamp (1 piece) O-ring ø 42 mm (2 pieces) O-ring ø 19 mm (2 pieces)
001 413.007 001 421.002 042 731.007 041 039.001
Diaphragm (2 pieces) Guiding nozzle (1 piece) Air nozzle D 3.2 (1 piece) Knurled nut M5 (2 pieces)
206 697.000 206 702.005 208 346.003 206 703.004
Wear parts
Water pressure – booster pump
Auxiliary water pump, self-priming with check valve in the suction line, 230 V / 50 Hz, 0.33 kW, 3.4 m3 /h, max. delivery pressure 6 bar Auxiliary water pump, self-priming with check valve in the suction line, 400 V / 50 Hz, 0.33 kW, 3.4 m3 /h, max. delivery pressure 6 bar, with hard plug Auxiliary water pump, self-priming with check valve in the suction line, 400 V / 50 Hz, 0.33 kW, 3.4 m3 /h, max. delivery pressure 6 bar, with CEE plug Water pump 3.4 m3 /h, self-priming with automatic switch, 230 V / 50 Hz, 0.75 kW, water protected IP 65, with check valve in suction line
MM 2599/11 GB
126
Part no. 423 324
422 097
435 229
429 706
Accessories for plastering machines
www.mortarmachines.com
Power cable / construction site lead Extension cable 16 Amp., 230 V 3 x 2.5 mm2, 20 m Construction site lead with CEE plug 16 Amp., 10 m, 5 x 2.5 mm2 Construction site lead with CEE plug 16 Amp., 25 m, 5 x 2.5 mm2 Construction site lead with CEE plug 32 Amp., 50 m, 5 x 2.5 mm2 Construction site lead with CEE plug 32 Amp., 25 m, 5 x 4 mm2 Construction site lead with CEE plug 32 Amp., 50 m, 5 x 4 mm2
Part no. 212 960.006 211 457.002 214 592.003 062 921.004 062 922.003 062 923.002
Cable drum
Cable drum with 40 m 230 V-cable and 4 x 230 V-sockets Cable drum with 25 m 380 V-cable and 4 x 230 V-sockets, Fuse for 2 sockets, 16 amp
Part no. 463 811
Main power cable, 230 V, 5 m (406 S) Main plug, 230 V
Part no. 470 368 470 370
Distribution block, 380 V, 32 amp, supply voltage and an electric power socket 380 V, 16 amp and 4 x 230 V sockets
Part no. 463 819
482 853
Main power cable
Distribution block
127
MM 2599/11 GB
www.mortarmachines.com
General accessories
For cleaning the delivery hoses Sponge rubber balls for delivery hose ID 13 mm for delivery hose ID 18 mm for delivery hose ID 20 mm for delivery hose ID 25 mm for delivery hose ID 35 mm for delivery hose ID 50 mm for delivery hose ID 60 + 65 mm for delivery hose ID 60 + 65 mm for delivery hose ID 90 + 100 mm
ø mm 19 20 25 30 45 60 80 70 120
Part no. 470 376 429 483 429 485 000 239.004 065 044.001 000 212.005 000 246.000 258 320.008 016 091.003
For cleaning and maintenance PM hand lever grease gun with hose Grease cartridge with high performance lubr. grease, 400 g Grease gun, small Cleaning brush
Part no. 000 211.006 000 113.007 000 112.008 000 100.007
PM spray gun including 5 m hose Cleaning spray gun V 35, alu. – short – without nozzle with air fittings Nozzle, steel ø 6/12 Nozzle, steel ø 8/14 Nozzle, steel ø 10/16 Nozzle, steel ø 12/18
000 210.007 211 564.005
Cleaning and care detergent “Limpiol” 354 20 l canister (enough for approx. 400-600 m2), biologically decomposable
PM pumping aid, 18 l in storage tank, 25 pcs
MM 2599/11 GB
128
210 180.008 210 127.003 210 126.004 210 129.001
Part no. 410 139
Part no. 266 743.004
General accessories
www.mortarmachines.com
Machines and working accessories
1
Fig. Wheel chock – steel-plate 636 1 Wheel chock – plastic UK 10 2 Wheel chock – plastic UK 36 2 Bracket for UK 36 Bracket for UK 10 Bracket for 636
Part no. 015 006.002 415 904 484 954 484 956 415 905 061 362.004
2
Lighting set 13 pin connector, 12 V 1.6 m cable Lighting set 13 pin connector, 24 V 1.6 m cable
Lighting set, width: 1 m 6 m cable Lighting set, width: 1 m 6 m cable
209 028.003
7 pin connector, 12 V
207 525.003
Number plate holder with folding frame
Protective helemt – yellow with PM-imprint
129
507 177
7 pin connector, 24 V
Vehicle cable adapter 7 - 13 pin, 12 V Vehicle cable adapter 13 - 7 pin, 12 V
Soft dock, coupling guard for ball head couplings on Alko chassis (M 760, M 740, M 730)
Part no. 496 261
Part no. 437 679 248 012.009
Part no. 362 732.003
Part no. 491 951
Part no. 064 626.006
MM 2599/11 GB
Putzmeister worldwide
Putzmeister Mörtelmaschinen GmbH Max-Eyth-Str. 10 72631 Aichtal · Germany Tel +49 (0) 7127 599-0 Fax +49 (0) 7127 599-743 Hotline +49 (0) 7127 599-699 You can find your contact persons in Sales, Marketing, Customer Service and Spare Parts Management on our website: www.mortarmachines.com
MM 2599/11 GB
130
131
MM 2599/11 GB
Terms and Conditions of Sale and Delivery Putzmeister Mörtelmaschinen GmbH (Last revised January 2002) I. Scope of Application 1. The following terms and conditions apply to all deliveries and performances, regardless of whether the individual case is a sales contract or a contract for work and services or a contractual relationship of yet another nature. 2. Terms and conditions of sale or other terms and conditions of business of the client do not apply, even if the sup- plier has not expressly objected to said terms and conditions. II. Conclusion of Contract, Modifications of Contract, Assignment of Rights 1. The documents which are a part of the offer (e.g., photographs, drawings) as well as data about the extent of the delivery, appearance, performance, dimensions, weight, consumption of operating materials, operating costs, etc., are only approximate values unless they have expressly been designated as binding. The supplier retains rights of ownership and copyrights to cost estimates, drawings and other documents. They must not be made available to third parties and shall be returned upon request. 2. The contract shall be deemed concluded when the supplier has confirmed acceptance of the order in writing or has commenced delivery or performance. If the supplier has submitted an offer which is subject to a time limit, the contract shall be deemed concluded when the client has submitted written acceptance of the offer in due time. 3. Oral secondary agreements and amendments to the contract shall not become effective until the supplier has con firmed them in writing. Obvious spelling or calculation errors may be cor-rected retroactively. 4. The client may not assign his rights from this contract. III. Prices 1. The prices are given ex works, including loading in the works, but excluding packaging, plus applicable value- added tax in conformity with the applicable provisions of the delivery or performance country. To the extent that binding remuneration of the supplier has not been agreed, the supplier’s prices in effect on the day of the delivery shall apply. 2. Engineer work, installation and commissioning will be billed separately. The billing may be calculated at either a flat rate or according to actual expenditure, plus travel costs, subsistence allowance and overnight expenses, overtime, surcharges for Sundays and public holidays. 3. Price changes are admissible if there has been a lapse of more than 6 months between conclusion of the contract and the agreed date of delivery. The supplier is entitled to adjust prices to the extent that the new price is in the same ratio to the agreed price as the price of the delivery and performance according to the valid price list on the day of the delivery is to the price of the delivery according to the valid price list on the day of the conclusion of the contract. With respect to other deliveries and performances not shown in a price list, the supplier is entitled to make a price adjustment which is reasonable in view of the circumstances. 4. If costs or charges are included in the prices and the former are raised following the conclusion of the contract, or if they become due additionally following conclusion of the contract, the supplier is entitled to bill the client for the additional amount. 5. If at the request of the client the supplier is prepared to make an exchange, the supplier is entitled to bill the incurred costs, no less, however, than the amount of the loss in value resulting from aging and use, plus 10.0% of the agreed price of the originally agreed object of the delivery, as compensation for the expenditures incurred by the supplier due to the exchange. The supplier may not demand the flatrate cost compensation described in the above provision if the client proves that no, or only minor, damage or expenditure resulted for the supplier. IV. Payment, Default of Payment, Set-Off, Retention 1. In the absence of deviating agreements, payment for the delivery of machines shall become due within 7 days of the delivery, for spare parts within 30 days and for services within 14 days of the invoice date without deductions. 2. Any and all outstanding receivables shall become due and payable immediately – even if an extension or other delay of payment has been granted – as soon as the client is more than 5 workdays in default of fulfilment, in whole or in part, of his obligations to the supplier or if circumstances arise which substantially reduce the creditworthiness of the client (e.g., deterioration of assets, suspension of payments, excess debt, objections to bills of exchange and cheques, filing of a petition for institution of bankruptcy proceedings or the institution or dismissal thereof). The supplier may in this case refuse further deliveries or performances and request the provision of reasonable security for his claims. 3. Payment by bill of exchange is subject to special agreement. Bills of exchange and cheques will only be accepted subject to redemption. The client shall bear collection and discount charges. No cash discount will be granted for payment by bill of exchange or in the event that there are overdue payments, even if such a discount has otherwise been agreed. 4. The client may offset supplier’s claims solely against undisputed or non-appealable claims. The client has a right of retention only if his counterclaim is based on the same contractual relationship and is undisputed or non- appealable, or if the supplier has committed a gross violation of his obligations from the same contractual relationship. However, this provision is without prejudice for the right of the client to retain a reasonable part of the purchase price due to defects of the supplier’s performance. 5. If the client is in default of payment, interest at a rate of 8.0% above the basic interest rate shall be paid on the supplier’s claims. This provision is without prejudice for the supplier’s claim for compensation for additional damage. 6. If the client suffers deterioration of assets in the meaning of No. IV.2., the supplier may withdraw from the contract. This provision is without prejudice for further statutory claims of the supplier, e.g., damage compensation. Damage compensation claims of the client are ex-cluded. V. Delivery Time, Partial Performances, Delay of Acceptance 1. Delivery and installation periods do not commence until the supplier and the client have reached agreement on all details of the performance and all terms and conditions of the transaction and the supplier has confirmed the order. Said periods shall be suspended as long as the client is in default of fulfilment of his contributory obligations from this contract (e.g., provision of documents, supply of materials, permits, releases) or of an agreed advance pay- ment. 2. The delivery period shall be deemed as observed if the object of the delivery has left the works or if notification of readiness for shipping has been given before lapse of the period. 3. The delivery period shall be extended by a reasonable amount in the event of force majeure, strike, lock-out and other unusual circumstances without fault; this provision shall also apply if a presupplier is affected, to the extent that these circumstances can be shown to have an influence on the delivery period. 4. If the supplier’s performance is delayed, he shall nevertheless not be in default of performance to the extent that the delay is caused by circumstances which he could not foresee and prevent when taking reasonable precautions and which he could not overcome by taking reasonable measures. 5. The supplier is entitled to withhold his performance as long as the client does not fulfil his obligations to the sup- plier from this or another contract or due to other legal reasons. 6. Partial performance is admissible to the extent that it is reasonable for the client. Such partial performances shall be deemed independent legal transactions which may be bill separately.
MM 2599/11 GB
132
7. If the terms and conditions of payment are not observed, if the delivery is not accepted in due time or if the acceptance thereof is refused or if security which has been agreed or is due in accordance with No. IV.2. has not been provided, the supplier is entitled, following fruitless lapse of a reasonable extension, to withdraw from the contract and to claim damage compensation. The supplier may claim without further proof damage compensation from the client in the amount of 25.0% of the order total for mass produced products and 75.0% of the order total for custom produced products, to the extent that the client does not prove that no dam-age, or only minor damage, has resulted. This provision is without prejudice for a claim of greater damage upon substantiation. 8. If at the request of the client the dispatch is delayed, the supplier may bill either the storage and maintenance costs actually incurred or a flat rate in the amount of _% of the invoice amount per month; the latter is, however, not permitted if the client proves that the supplier suffered no, or only minor, damage or incurred no, or only minor, expenditures. This provision has no effect on the client’s payment obligations. VI. Transfer of Risk, Shipping and Acceptance 1. The risk shall pass to the client no later than the point in time of the dispatch of the object of the delivery. This provision shall also apply to partial performance, or if the supplier has agreed to bear the costs for shipping or installation, or if he performs the delivery himself. No liability is accepted for the most favourable freight charges or transport time. 2. If the delivery, the shipping or the acceptance of the object of the delivery is delayed by the client due to no fault of the supplier, all risks – including the risk of deterioration or loss of the object of the delivery as well as all risks resulting from the object itself – shall pass to the cli-ent as of the notification of the readiness for shipping or notification of completion. 3. Upon written request, the consignment will be insured at the client’s expense for the cover sum he requests. 4. The client is liable for any and all damage which he causes by his negligence during or before acceptance of the object of the delivery (e.g., sampling, any acceptance procedure to be per-formed, etc.). 5. Delivered objects shall be accepted by the client, even if they are defective, without prejudice for his rights. VII. Complaint of Defects, Guarantee, Guarantee Period 1. The client shall examine the object of the delivery immediately after receipt and lodge written complaint of any defects without delay. The client shall also examine the object of the delivery for defects before every commissio- ning, in particular regarding safety and suitability for use. During its use, the object of the delivery shall be moni tored constantly with regard to safety and defects. If there are even slight reservations concerning the suitability for use or the slightest reservations concerning safety, the object must not be used or its operation must be shut down immediately. The supplier shall be given written notification immediately, specifying the reservations or the defect within the scope of a complaint of defects. The client shall allow the supplier the time and opportunity required to perform any and all remedies and re-placement deliveries which the supplier regards as necessary. Otherwise, the supplier is released from liability for any consequences resulting therefrom. 2. If the supplier’s performance is defective at the time of the transfer of risk, the supplier shall perform subsequently, at his discretion remedying the defect or delivering a defect-free object in exchange for the defective object delivered. Replaced parts become the property of the supplier. If subsequent performance regarding a defect for which the supplier is responsible is not possible, has finally failed, is unreasonable for the purchaser, or if the seller has refused both types of subsequent performance, or if a reasonable extension for subsequent performance granted to the supplier has fruitlessly lapsed, the client may at his discretion reduce the remuneration for the supplier or withdraw from the contract. If there is only an minor defect, however, the client has only the right to reduce the remuneration. 3. If the supplier has fraudulently concealed a defect or given a guarantee for the quality of the object, the statutory regulation shall apply. 4. Unauthorized remedy of defects by the client or third parties shall result in the loss of all claims due to defects on the supplier. The supplier will not bear the costs for the remedy of defects by the client or third parties without the express prior agreement of the supplier. This provision does not apply in urgent cases – especially when delay is not possible – in which the operating safety is endangered or in order to prevent unreasonably great damage. In such cases, the supplier shall be notified immediately and shall be obligated to reimburse only the necessary costs. 5. In particular, the supplier does not accept any guarantee or any warranty obligation for damage in the following cases: unsuitable or improper use, defective installation or commis-sioning by the client or third parties, natural wear and tear, defective or negligent handling, im-proper maintenance, excessive load, unsuitable operating mate- rials and replacement materi-als, poor work, unsuitable foundation, chemical, electro-technical/electronic or elec- tric influences. This exclusion does not apply if the supplier is responsible for the damage in conformity with the more specific provision of the regulation in VIII. No. 5. There shall also be no liability and warranty obligation for the supplier in particular for the following measures and actions taken by the client or third parties and the consequences thereof: improper remedy of defects, change of the object of the delivery without the prior agreement of the supplier, addition and insertion of parts, in particular of spare parts which do not come from the supplier or which the supplier has not expressly approved for insertion, and failure to follow the operating instructions. 6. The supplier does not grant any warranty for material provided by the client or acquired on the basis of specifica- tions predetermined by the client or for designs predetermined by the client. 7. The supplier does not grant any warranty for possible material defects for the sale of used machines, devices or parts. The supplier does not guarantee any quality and points out that used machines and parts frequently do not have the same quality as newly manufactured machines and parts, also with respect to their ability to perform. 8. The client’s claims for subsequent performance as well as his possible claims for damage compensation or reimbursement for expenditures due to defects shall be time-barred after one year following delivery of the goods for deliveries, after one year following conclusion of the installation for installations. If the acceptance of the object of the delivery or the accep-tance of the delivery and performance is delayed due to no fault of the supplier, the guarantee shall expire no later than 12 months after readiness. An analogous provision applies to subsequent per- formance. If the supplier has fraudulently concealed the defect or has given a guarantee for the quality of the item, the statutory regulation shall apply to the time-barring of any claims on the part of the client based thereon. The statutory regulation shall also apply to the time-barring of any damage compensation claims of the client because of defects if the supplier is guilty of intention or gross negligence or if the damage compensation claim is based on an injury to life, body or health. 9. Any and all other further claims of the client are excluded, in particular for damage compensa-tion, including com- pensation for damage which did not result on the object of the delivery it-self. No. VIII.5. applies accordingly. VIII. Withdrawal, Damage Compensation and Limitation of Actions 1. The client may withdraw from the contract if the complete performance finally becomes impossible for the supplier before the transfer of risk. A claim by the client for damage com-pensation due to final impossibility of the perfor- mance is excluded unless the supplier is guilty of gross negligence. Any claim for damage compensation is limited to the damage foreseeable at the time of conclusion of the contract and resulting from the usual course of events and is limited in amount to a maximum of 15% of the contract sum. The client may also withdraw from the contract if, for an order of identical items, the delivery of a part of the ordered items in terms of quantity becomes impossible and the client has a justified interest in refusing a partial delivery. If this is not the case, the client may reduce the counter-performance accordingly.
2. If the impossibility occurs during delay of acceptance or due to the fault of the client, the latter remains obligated to counterperformance. 3. The client may withdraw from the contract if the supplier is in default of his performance, to the extent that said performance is due, the client has previously set a reasonable extension without success, and the supplier is responsible for his non-performance. A claim by the client for damage compensation due to the supplier’s default of performance is excluded unless the supplier is guilty of gross negligence. Any claim for damage compensation is limited to the damage foreseeable at the time of conclusion of the contract and resulting from the usual course of events and is limited in amount to _% for each full week of delay, in total to a maximum of 5% of the value of that part of the total delivery which cannot be used in due time because of the delay. 4. The client’s right to withdraw from the contract – beyond the cases regulated above in Nos. 1 and 3 – in accor- dance with statutory regulations in the event of a violation of obligations for which the supplier is responsible and which does not result from a defect remains unaffected. 5. Any and all other more extensive claims of the client, in particular for termination and for damage compensation, including claims for damage compensation in lieu of performance and claims for compensation of damage of any type, for any legal reason whatsoever, including the violation of pre-contractual and contractual obligations, for actions in tort committed during development, conclusion and performance of the contract as well as for damage which did not result on the object of the delivery itself, are excluded. This exclusion of liability does not apply if the supplier is guilty of gross negligence. Furthermore, this exclusion of liability does not apply in the event of culpable violation of the essential contractual obligations of the supplier. Furthermore, this exclusion of liability does not apply to any claim of the client for damage compensation based on an intentional or grossly negligent injury of life, body or health. Finally, this exclusion of liability does not apply in those cases in which liability is compulsory in accordance with the Product Liability Act for personal injury or material damage to privately used objects. If these cases result in the supplier’s liability – or in deviation from the above provisions in other cases due to contractual or statutory basis for claim – said liability shall be limited to compensation for the foreseeable damage resulting from the usual course of events and which has been proven in each individual instance. However, this limitation of liability does not apply to any liability in accordance with the Product Liability Act due to defects of the object of the delivery for personal injury or for material damage to privately used objects. Furthermore, this limitation of liability does not apply if the supplier is guilty of intention or of gross negligence. 6. Damage compensation claims of the client on the supplier – whether due to the violation of pre-contractual or con tractual obligations, to actions in tort committed during the develop-ment, conclusion and performance of the contract or due to other legal reasons – shall be time-barred no later than one year after the end of the year in which the claim arose and the client learned of the circumstances substantiating the claim and of the person of the debtor, or would have learned thereof without gross negligence. If the debtor is guilty of intention or gross negli- gence, the statutory regulation shall apply. Furthermore, the statutory regulation shall apply to any damage com- pensation claim based on an intentional or grossly negligent in-jury of life, body or health. 7. The managing directors of the supplier and his employees are liable to the client for actions in tort committed during the development, conclusion and performance of the contract only in cases of intention and gross negli- gence. No. 6 above applies analogously to the time-barring of claims of the client on the managing directors of the supplier and his employees.
XI. Use of Software To the extent that software is included in the scope of the delivery, the client shall be granted a non-exclusive right to use the supplied software, including its documentation. It is released for use on the object of the delivery intended for this purpose. The use of the software on more than one system is prohibited. The client may reproduce, rework or translate the software or convert from the object code into the source code only within the legally permissible scope (Sec. 69 a ff UrhG, Copyright Act). The client obligates himself not to remove manufacturer’s information – in particular copyright notices – or to change them without the prior express permission of the supplier. All other rights to the software and the documentation, including the copies, remains with the supplier or the software supplier. The granting of sub-licenses is not permissible. XII. Proper Law, Place of Performance, Jurisdiction 1. Sole proper law is that of the Federal Republic of Germany. In case of doubt, the German language version of all contractual provisions shall be decisive. The Uniform Sales Convention does not apply. 2. Place of performance is 72631 Aichtal. 3. If the client is a merchant, a legal person under public law or a special fund under public law, the courts of Stuttgart shall have jurisdiction for any and all disputes arising under this con-tractual relationship, including disputes regarding its creation and its effectiveness as well as for bill of exchange and cheque litigation. The supplier may apply to any other court which has jurisdiction according to statutory provisions. 4. If one of the provisions of these terms and conditions of sale and delivery is invalid, in whole or in part, the validity of the remaining provisions shall not be affected.
Putzmeister Mörtelmaschinen GmbH D-72629 Aichtal – P.O. Box 2152 · Germany Telephone: +49 (0) 71 27 599-0 - Fax: +49 (0) 71 27 599-520 Internet: www.mortarmachines.com - E-mail:
[email protected]
IX. Security 1. The object of the delivery remains the property of the supplier until full payment of the agreed price and of all other claims, including future claims, from the business relationship with the client. If in the context of the payment of the purchase price the supplier becomes liable on the basis of bills of exchange, the retention of title does not l lapse before all bills of exchange have been completely redeemed by the client. 2. The client assigns now to the supplier the claims arising from the further sale of the objects of the delivery in the amount of the value of the objects of the delivery and all secondary rights. The client is authorized to collect the claim. The authority of the supplier to collect the claim himself remains unaffected hereby. 3. The supplier obligates himself to release security at his discretion to the extent that the realizable value of his secu- rity exceeds the total of his claims from the business relationship by more than 10%. 4. As long as the client fulfils his obligations to the supplier, he is entitled to dispose of the object of the delivery in the course of orderly business and subject to retention of title, to the extent that the claims effectively pass to the supplier in accordance with No. 2. Extraordinary dis-posals such as pledges, transfer by way of security and any and every assignment are not permissible. The supplier shall be given written notification immediately of any attachment by third parties on the object of the delivery or assigned claims, in particular pledges. 5. During the period of the retention of title, the client is in principle entitled to possess and make use as intended of the object of the delivery. In the event of actions in breach of contract by the client – in particular if the client is in default of payment – as well as in the cases of No. IV.2., however, the supplier may repossess the object of the delivery and revoke the authori-zation to collection of the claims resulting from the further sale. The client is – under exclusion of rights of retention – obligated to surrender the object. The client shall bear any and all costs of the repossession and exploitation. The supplier is entitled to private sale. The client shall upon request imme- diately submit to the supplier a catalogue of the claims assigned in conformity with No. 2. as well as all additional information and documents necessary for exercise of the claims to which the supplier is entitled, and inform the debtors of the assignment. 6. The client shall maintain the object of the delivery in proper condition during the retention of title and allow the supplier or a workshop authorized by the supplier – with the exception of emergencies – to perform immediately all of the maintenance and repair work prescribed by the supplier. 7. In the case of automobile concrete pumps, the supplier shall have the right to possess the vehicle title for the duration of the retention of title. 8. The exercise of the retention of title and pledge of the object of the delivery by the supplier shall not be deemed withdrawal from the contract. 9. If the retention of title or the assignment is not effective according to the law of the country in which the goods are located, the security closest in nature to retention of title or assign-ment in this country shall be deemed as agreed. If a contribution of the client is required for this purpose, the client shall perform all legal actions necessary to establish and preserve such rights. X. Industrial Property Rights If the supplier is to perform according to drawings or models, samples, or using parts supplied by the client, the client shall warrant that industrial property rights of third parties are not infringed hereby. The client shall indemnify the supplier from any and all claims by third parties due to infringement of industrial property rights and shall compensate the supplier for any resulting damage and for his costs and expenditures. If the client is prohibited from manufacture or delivery by a third party on the basis of an industrial property right, the supplier is entitled to cease work without making a closer examination of the legal situation. In this case, the supplier may withdraw from the contract and demand compensation for his damage as well as his costs and expenditures.
133
MM 2599/11 GB
Putzmeister Mörtelmaschinen GmbH Max-Eyth-Straße 10 · D-72631 Aichtal · Germany P. O. Box 2152 · D-72629 Aichtal · Germany Telephone +49 (0) 71 27 599-0 Telefax +49 (0) 71 27 599-743 Internet eMail MM 2599/11 GB
www.mortarmachines.com
[email protected]
