Transcript
Accessories FKS, MNS Flat automotive fuses (FKS) for use with MNG, MEN and MDG power supplies. Snap adapter (MNS) allows MNG up to 5 A to be mounted on DIN-rail.
From page 4.13.2 UPS components Using the UPS accessories, the MPS power supplies from 10 A upwards can be used to create a UPS power source
From page 4.13.3
4.13.1
Accessories FKS Automotive type fuse
FKS
MNS
Automotive type fuse
Snap foot for DIN-rail (EN 50022)
Snap foot adapter for DIN-rail
Automotive type fuse FKS 2 grey FKS 3 violet FKS 4 pink FKS 5 light brown FKS 7,5 brown FKS 10 red FKS 15 light blue FKS 20 yellow FKS 25 white FKS 30 light green FKS 40 orange FKS 40 orange FKS 50 red FKS 60 blue Snap foot
small small small small small small small small small small small large large large
Art.-No. Fuse value 2A 3A 4A 5A 7,5 A 10 A 15 A 20 A 25 A 30 A 40 A 40 A 50 A 60 A
90400 90401 90402 90403 90404 90405 90406 90407 90408 90409 90419 90411 90412 90413 Art.-No.
Art.-No. mounting dimensions a x b 56 x 47,5 mm 56 x 53,5 mm 64 x 62 mm 84 x 75,5 mm
MNS 1 MNS 2,5 MNS 3,5 MNS 5
Notes The power supplies can be supplied with the snap adapter already mounted. Extend the Art.No. of the power supply with the number 89 4.13.2
Art.-No.
89430 89431 89432 89433
Accessories Batteries
UPS components
Under voltage relays Battery fuses
Circuit diagram Consumer
Accumulator
F = Battery fuse K = Under voltage relay Batteries 12 V (2 required) Capacity A512/ 2,0S 2 Ah A512/ 3,5S 3,5 Ah A512/ 6,5S 6,5 Ah A512/ 10,0S 10 Ah A512/ 25,0S 25 Ah A512/ 40,0A 40 Ah A512/ 55,0A 55 Ah
Art.-No. dimensions (L x B x H) 178,5 x 34,1 x 60,5 mm 134,0 x 66,8 x 60,0 mm 152,0 x 65,5 x 94,5 mm 152,0 x 98,0 x 94,5 mm 176,0 x 167,0 x 126,0 mm 210,0 x 175,0 x 175,0 mm 210,0 x 175,0 x 175,0 mm
battery holder 1 x H1 2 x H2 1 x H1 2 x H2 2 x H2 2 x H3 2 x H3
mounting E1 E2 E1 E2 E2 E2 E2
89631 89632 89634 89636 89639 89641 89643
Battery - under voltage relay Relay 1 10 A Relay 2 + 3 20 A + 40 A
Art.-No. 89510 89512
Fuses Battery fuse model 1 Battery fuse model 2 Battery fuse model 3
Art.-No. 89520 89522 89524
10 A 20 A 40 A
Battery holder H1 H2 H3
Art.-No. dimensions (L x B x H) 132,0 x 30,0 x 85,0 mm 177,0 x 40,0 x 137,0 mm 277,0 x 40,0 x 195,0 mm
89530 89531 89532
Diode block for redundancy Diode block 20 A
Art.-No. 89503
Mounting diagrams E1
E2 Accumulator
Accumulator Accumulator
Notes For all UPS application 2 x 12V batteries are necessary 4.13.3
