Preview only show first 10 pages with watermark. For full document please download

Catalogue Sheet: Ecsc Series

   EMBED

Share

Transcript

Type: Project/Location: Contractor: ECSC SERIES Prepared By: Date: Plastic Pictogram Exit Combo Unit Model No.: FEATURES DIMENSIONS ∙∙ Energy efficient, long-life white LEDs consuming 4.2W at normal operation Dimensions are approximate and subject to change. ∙∙ Energy efficient, long-life white LEDs consuming 4.2W at normal operation ∙∙ Dual voltage input capability 120/347VAC ∙∙ 3.6V Nickel-Cadmium battery provides minimum 90 minutes of emergency lighting ∙∙ Fully adjustable LED glare-free lens ∙∙ Adjustable light heads for forward or backward lighting 11-3/8” [28.9cm] ∙∙ 3.6V 1W long life LED light source, 6000K 2-3/16” [5.5cm] ∙∙ Automatic, temperature compensated, pulse type charger 9-1/16” [23cm] ∙∙ Automatic brownout protection ∙∙ Battery lock-out prevents discharge during installation ∙∙ Comes standard with three pictogram legends for direction selection ∙∙ Red LED charger monitor 5-15/16” [15cm] ∙∙ Low voltage disconnect prevents over discharge of battery ∙∙ Injection-molded off-white thermoplastic ABS housing 13-5/8” [34.5cm] ∙∙ Fast and easy installation with snap-together design ∙∙ Ceiling, wall or end mount installation ∙∙ CSA C22.2 no.141-10 listed ∙∙ Comes standard with one (1) year warranty < PICTO LEFT FROM HERE PICTO STRAIGHT FROM HERE PICTO > RIGHT FROM HERE POWER CONSUMPTION AND UNIT RATING MODEL AC SPECS ECSC-2LEDWR 120/347VAC DC SPECS 0.5/0.4 A 4.2/3.6W Ni-Cd battery Min. 90 minutes *NOTE: The ECS Family cannot be combined with other Emergi-Lite® Products on the same emergency A.C. circuit. ORDERING INFORMATION SERIES ECSC VOLTAGE Blank= 120/347VAC EXAMPLE: ECSC-2LEDWR All information and specifications contained in this catalogue sheet are subject to change due to engineer design, errors and omissions. © 2014. Thomas & Betts Limited. All rights reserved. LAMP -2LEDWR= 2X 1W LED