Catalogue Techsupply

Transcript

www.speakercraft.com Version 6.0 - 28.2.2008 In-Ceiling & In-Wall Speakers AIM is the finest sounding in-ceiling speaker system ever created! Unique in concept and revolutionary in design, the Theater In Motion Experience is the most dramatic advancement in custom audio since we invented the inwall speaker over twenty years ago. Mounted flush in the ceiling these speakers automatically drop down to a 15o , 30o or 45 ̊ angle and then rotate to aim toward any position in the room. Utilizing a remote control and multiple presets , the system can be configured to a variety of seating positions and configurations. This makes the TIME speaker an In-Ceiling and In-Room loudspeaker in the same package. Why choose between the two when you can have both? TIME In-Ceiling Speaker Systems   2 - SpeakerCraft  design improvements, specifications and prices may change without notice Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker 8” TIME - In - Ceiling Speakers TIME Five • Motorized in-ceiling speaker descends from 15° to 45° and Rotates 270° • 8” Kevlar Cone Woofer • 1” Aluminum/Magnesium Dome Tweeter • Timbre-Matched to AIM Five • Fully Programmable • Efficiency: 91dB 1W/1m • Power Recommendations: 5 - 100 watts (undistorted) • Impedance: 8/6/4Ω depending on switch settings • Frequency Response: 33Hz - 20kHz ±2dB • Diameter x Depth: 29.5 x 28 cm • Cut-out Diameter: 24.6 cm Product TIME Five Article 09-7374 TIME Controller • Can be controlled via IR and RS232 • Features rich hand-held IR remote control (included) • Single rack design • Dimensions (H x W x D): 5.4 x 43.8 x 25.4 cm Product TIME Controller Article 09-7377 ©TechSupply SA - 28.02.08 - v6.0 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD AIM is the finest sounding in-ceiling speaker system ever created! Speakercraft were the first company to introduce a pivoting speaker. They patented the design and will defend our right to be the only company to offer our dealers this superior technology. The SpeakerCraft tradition of innovative design, combined with one of the most extensive engineering efforts in this industry’s history, has led to the creation of the patented AIM series of fully directional in-ceiling loudspeakers. Each model can be entirely pivoted towards the listener while remaining discretely recessed behind a flush-mounted grille. If listening position or tastes change, the speaker can be easily aimed in another direction with a simple push of the hand. SpeakerCraft innovation, excellence in engineering, and American made quality make the AIM series one of the most exceptional loudspeakers ever. AIM In-Ceiling Speaker Systems   4 - SpeakerCraft  Front-Mounted Treble Switch WavePlaneTM Tweeter Baffle Front-Mounted Bass Switch 8” Woofer Independently Pivots & Rotates up to 30° Heat Sink Dissipates Voice Coil Heat for Increased Woofer Performance 1” Tweeter Independently Pivots up to 30° Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker 8” AIM - In - Ceiling Speakers AIM8 Five • Pivoting and Rotating 8” Kevlar Cone Woofer • Pivoting 1” Aluminum/Magnesium Dome Tweeter • Front mounted switches allow for up to ±3dB of Bass and Treble adjustment • Accu-Grille dramatically reduces unwanted acoustic reflections • Timbre-Matched to AIM7 Five and TIME Five • Efficiency: 91dB 1W/1m • Power Recommendations: 5 - 150 watts (undistorted) • Impedance: 8/6/4Ω depending on switch settings • Frequency Response: 33Hz - 20kHz ±2dB • Diameter x Depth: 29.2 x 14.7 cm • Cut-out Diameter: 24.8 cm Product AIM 8 Five Article 09-6507 AIM8 Four • Pivoting and Rotating 8” Aluminum/Magnesium Cone Woofer • Pivoting 1” Aluminum/Magnesium Dome Tweeter • Front mounted switches allow for up to ±3dB of Bass and Treble adjustment • Accu-Grille dramatically reduces unwanted acoustic reflections • Timbre-Matched to AIM7 Four, CRS8/6 Four, AIM7 MT Four and MT8/6 Four, MT8 Four • Efficiency: 90dB 1W/1m • Power Recommendations: 5 - 150 watts (undistorted) • Impedance: 8/6/4Ω depending on switch settings • Frequency Response: 35Hz - 20kHz ±2dB • Diameter x Depth: 29.2 x 14.7 cm • Cut-out Diameter: 24.8 cm Product AIM 8 Four Article 09-6502 AIM8 Three • Pivoting and Rotating 8” Aluminum Cone Woofer • Pivoting 1” Aluminum Dome Tweeter • Front mounted switches allow for up to ±3dB of Bass and Treble adjustment • Accu-Grille dramatically reduces unwanted acoustic reflections • Timbre-Matched to AIM7 Three, CRS8/6 Three, AIM MT Three, MT8/6 Three and AIM LCR Three • Efficiency: 89dB 1W/1m • Power Recommendations: 5 - 150 watts (undistorted) • Impedance: 8/6/4Ω depending on switch settings • Frequency Response: 37Hz - 20kHz ±2dB • Diameter x Depth: 29.2 x 14.7 cm • Cut-out Diameter: 24.8 cm Product AIM 8 Three Article 09-6503 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD 8“ AIM - In-Ceiling Speakers AIM8 Two • Pivoting and Rotating 8” Resin Reinforced Fiberglass Cone Woofer • Pivoting 1” Treated Silk Dome Tweeter • Front mounted switch allows for up to ±3dB of Treble adjustment • Timbre-Matched to CRS8 Two, CRS Two, MT8 Two and MT Two • Efficiency : 89dB 1W/1m • Power Recommendations : 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 40Hz - 20kHz ±2dB • Diameter x Depth : 29.2 x 14.7 cm • Cut-out Diameter : 24.8 cm Product AIM8 Two Article 09-6508 AIM8 One • Pivoting and Rotating 8” Injection Molded Polypropylene Cone Woofer • Pivoting 1” Treated Silk Dome Tweeter • Timbre-Matched to CRS8 One, CRS One, MT8 One and MT One • Efficiency : 88dB 1W/1m • Power Recommendations : 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 40Hz - 20kHz ±2dB • Diameter x Depth : 29.2 x 14.7 cm • Cut-out Diameter : 24.8 cm Product AIM8 One Article 09-6509 7“ AIM - In-Ceiling Speakers AIM7 Five • Independently Pivoting and Rotating 7” Kevlar Cone Woofer • Independently Pivoting 1” Aluminum/Magnesium Dome Tweeter • Front mounted separate Bass and Treble switches allow for up to ±3dB adjustment • Accu-Grille dramatically reduces unwanted acoustic reflections • Efficiency : 91dB 1W/1m • Power Recommendations : 5 - 150 watts (undistorted) • Impedance : 8/6/4Ω depending on switch settings • Frequency Response : 35Hz - 20kHz ±3dB • Diameter x Depth : 25 x 13.1 cm • Cut-out Diameter : 21 cm   6 - SpeakerCraft  Product AIM7 Five Article 09-7329 Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker 7” AIM - In - Ceiling Speakers AIM7 Four • Independently Pivoting and Rotating 7” Aluminum/Magnesium Cone Woofer • Independently Pivoting 1” Aluminum/Magnesium Dome Tweeter • Front mounted separate Bass and Treble switches allow for up to ±3dB adjustment • Accu-Grille dramatically reduces unwanted acoustic reflections • Efficiency: 92dB 1W/1m • Power Recommendations: 5 - 150 watts (undistorted) • Impedance: 8/6/4Ω depending on switch settings • Frequency Response: 37Hz - 20kHz ±3dB • Diameter x Depth: 25 x 13.1 cm • Cut-out Diameter: 21 cm Product AIM 7 Four Article 09-7328 AIM7 Three • Pivoting and Rotating 7” Aluminum Cone Woofer • Pivoting 1” Aluminum Dome Tweeter • Front mounted switches allow for up to ±3dB of Bass and Treble adjustment • Accu-Grille dramatically reduces unwanted acoustic reflections • Efficiency: 91dB 1W/1m • Power Recommendations: 5 - 125 watts (undistorted) • Impedance: 8/6/4Ω depending on switch settings • Frequency Response: 40Hz - 20kHz ±3dB • Diameter x Depth: 25 x 13.1 cm • Cut-out Diameter: 21 cm Product AIM 8 Three Article 09-7327 AIM7 Two • Pivoting and Rotating 7” Resin Reinforced Fiberglass Cone Woofer • Pivoting 1” Treated Silk Dome Tweeter • Front mounted switch allows for up to ±3dB of Treble adjustment • Efficiency: 90dB 1W/1m • Power Recommendations: 5 - 125 watts (undistorted) • Impedance: 8Ω • Frequency Response: 40Hz - 20kHz ±3dB • Diameter x Depth: 25 x 13.1 cm • Cut-out Diameter: 21 cm Product AIM 7 Two Article 09-7326 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD 5“ AIM - In-Ceiling Speakers AIM5 Three • Pivoting and Rotating 51⁄4” Aluminum Cone Woofer • Pivoting 3⁄4” Aluminum Dome Tweeter • Timbre-Matched to all ... Three speakers • Front Mounted Bass & Treble Equalization Switches • Efficiency : 89dB 1W/1m • Power Recommendations : 5 - 100 watts (undistorted) • Impedance: 8/6/4Ω depending on switch settings • Frequency Response: 50Hz - 20kHz ±2dB • Diameter x Depth : 20.8 x 11.5 cm • Cut-out Diameter : 16.9 cm Product AIM5 Three Article 09-7340 AIM5 One • Pivoting and Rotating 51⁄4” Injection Molded Polypropylene Cone Woofer • Pivoting 3⁄4” Treated Silk Dome Tweeter • Timbre-Matched to AIM8 One, CRS8 One, CSS6 One, AIM7 MT One, TIME One, AIM Monitor 1, AIM Monitor LCR 1 and AIM LCR 3 • Front Mounted Treble Equalization Switch • Efficiency : 88dB 1W/1m • Power Recommendations : 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 40Hz - 20kHz ±2dB • Diameter x Depth : 20.8 x 11.5 cm • Cut-out Diameter : 16.9 cm   8 - SpeakerCraft  Product AIM5 One Article 09-7341 Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker AIM7 Five Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD Custom Round Series (CRS) speakers are specifically designed for in-ceiling applications. The series contains a variety of five-inch, six-inch and eight-inch two-way in-ceiling speakers. Several of these models incorporate our exclusive WavePlaneTM tweeter baffle. The WavePlaneTM aids in high f requency forward radiation and overall speaker tonal balance. Many speakers in this series include pivoting tweeters which allow the user to direct high frequencies toward a desired listening area. Most CRS speakers also come equipped with the ability to adjust woofer and/or tweeter volume levels. Offering superb sound quality, outstanding features, and a lifetime warranty, the Custom Round Series has become the industry’s most popular line of in-ceiling speakers. CRS Custom Round Series Standard Co-Axial WavePlaneTM Technology • No Tweeter Baffle • Uneven Forward Dispersion which causes distortion • 95% Solid Plane for Tweeter • 80% Open Area for Woofer • Even dispersion, less distortion • Not available on other brands   10 - SpeakerCraft  Our speakers sound much better off-axis ! Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker 8“ CRS In-Ceiling Speakers CRS8 Four • 8” Aluminum/Magnesium Cone Woofer, Pivoting 1” Aluminum/Magnesium Dome Tweeter • Front mounted switches allow for up to ±3dB of Bass and Treble adjustment • Efficiency: 90dB 1W/1m • Power Recommendations: 5 - 150 watts (undistorted) • Impedance: 8/6/4Ω depending on switch position • Frequency Response: 36Hz - 20kHz ±2dB • Diameter x Depth: 30.3 x 11.5 cm • Cut-out Diameter: 24.8 cm Product CRS 8 Four Article 09-6512 CRS8 Three • 8” Aluminum Cone Woofer, Pivoting 1” Aluminum Dome Tweeter • Front mounted switches allow for up to ±3dB of Bass and Treble adjustment • Efficiency: 90dB 1W/1m • Power Recommendations: 5 - 125 watts (undistorted) • Impedance: 8/6/4Ω depending on switch position • Frequency Response: 38Hz - 20kHz ±2dB • Diameter x Depth: 30.3 x 11.5 cm • Cut-out Diameter: 24.8 cm Product CRS 8 Three Article 09-6506 CRS8 Two • 8” Glass Composite Cone Woofer, Pivoting 1” Silk Dome Tweeter • Front mounted switch allows for up to ±3dB of Treble adjustment • Efficiency: 90dB 1W/1m • Power Recommendations: 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 40Hz - 20kHz ±2dB • Diameter x Depth: 30.3 x 11.5 cm • Cut-out Diameter: 24.8 cm Product CRS 8 Two Article 09-6513 CRS8 One • 8” Polypropylene Cone Woofer, Pivoting 1” Silk Dome Tweeter • Efficiency: 89dB 1W/1m • Power Recommendations: 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 40Hz - 20kHz ±2dB • Diameter x Depth: 30.3 x 11.5 cm • Cut-out Diameter: 24.8 cm Product CRS 8 One Article 09-6514 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD 6” CRS In-Ceiling Speakers CRS Four • 6 1⁄2“ Aluminum/Magnesium Cone Woofer with Dual Voice Coil and Rubber Surround • Pivoting 1“ Aluminum/Magnesium Dome Tweeter with Neodymium Magnet • Front mounted switches allow for up to ±3dB of Bass and Treble adjustment • Efficiency : 90dB 1W/1m • Power Recommendations: 5 - 150 watts (undistorted) on 8/6/4Ω depending on switch position • Frequency Response : 37Hz - 20kHz ±2dB • Diameter x Depth: 24.9 x 10.4 cm • Cut-out Diameter : 21 cm Product CRS Four Article 09-3495 CRS Three • 6 1⁄2” Aluminum Cone Woofer with Dual Voice Coil and Rubber Surround • Pivoting 1” Liquid Cooled Aluminum Dome Tweeter with Neodymium Magnet • Front mounted switches allow for up to ±3dB of Bass and Treble adjustment • Efficiency : 90dB 1W/1m • Power Recommendations : 5 - 125 watts (undistorted) on 8/6/4Ω depending on switch position • Frequency Response : 40Hz - 20kHz ±2dB • Diameter x Depth : 24.9 x 9.7 cm • Cut-out Diameter : 21 cm Product CRS Three Article 09-3496 CRS Two • 6 1⁄2” Glass Composite Cone Woofer with Rubber Surround • Pivoting 1” Liquid Cooled Silk Dome Tweeter with Neodymium Magnet • Front mounted switch allows for up to ±3dB of Treble adjustment • Efficiency : 92dB 1W/1m • Power Recommendations: 5 - 120 watts (undistorted) on 8Ω • Frequency Response : 40Hz - 20kHz ±2dB • Diameter x Depth :24.9 x 9.7 cm • Cut-out Diameter :21 cm Product CRSTwo Article 09-3497 CRS One • 6 1⁄2” Polypropylene Cone Woofer with Rubber Surround • Pivoting 1”Liquid Cooled Silk Dome Tweeter with Neodymium Magnet • Efficiency : 92dB 1W/1m • Power Recommendations : 5 - 100 watts (undistorted) on 8Ω • Frequency Response : 40Hz - 20kHz ±2dB • Diameter x Depth : 24.9 x 9.7 cm • Cut-out Diameter : 21 cm   12 - SpeakerCraft  Product CRS One Article 09-3498 Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker 5“ CRS In-Ceiling Speakers 5.5R • 5 1⁄4” Aluminum Cone Woofer • 1” Aluminum Dome Tweeter • Efficiency: 89dB 1W/1m • Power Recommendations: 5-100 watts (undistorted) • Frequency Response: 50Hz - 20kHz • Impedance: 8Ω • Diameter x Depth: 21.5 x 8.3 cm • Cut-out Diameter: 17.2 cm Product CRS 5.5R Article 09-6553 5.2R • 5 1⁄4” Polypropylene Cone Woofer with Urethane Surround • 1⁄2” Liquid Cooled Polyamide Dome Tweeter • Efficiency: 91dB 1W/1m • Power Recommendations: 5 - 50 watts (undistorted) • Frequency Response: 55Hz - 20kHz • Impedance: 8Ω • Diameter x Depth: 21.5 x 8.3 cm • Cut-out Diameter: 17.2 cm Product CRS 5.2R Article 09-3500 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD CSS Custom Square In-Ceiling Speaker Simple solutions are often the most effective. In response to requests from the field , we have taken the technology from our Award Winning Custom Round Series in-ceiling speakers and created a line of square ceiling speakers. Since esthetics are such a large part of the appeal of flush mounted loud speakers , the new CSS 6 series will offer yet an other appearance option . The CSS 6 One and CSS 6 Three both feature six inch woofers and coaxially mounted tweeters . They are identical to their round counter parts in the CRS series with regards to drivers and sonic performance. As with the CRS series, the CSS product features our innovative Wave PlaneTM technology. CSS Custom Square Speaker   14 - SpeakerCraft  Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker 6” CSS - In - Ceiling Speakers CSS6 Three • 6 1⁄2” Aluminum Cone Woofer with Dual Voice Coil and Rubber Surround • Pivoting 1” Liquid Cooled Aluminum Dome Tweeter with Neodymium Magnet • Front mounted switches allow for up to ±3dB of Bass and Treble adjustment • Timbre-Matched to AIM8 Three, CRS8 Three, MT8 Three and MT Three • Efficiency: 90dB 1W/1m • Power Recommendations: 5 - 125 watts (undistorted) • Impedance: 8/6/4Ω depending on switch position • Frequency Response: 40Hz - 20kHz ±2dB • Dimensions (L x H x D): 22.3 x 22.3 x 10.2 cm • Cut-out: 18.1 x 18.1 cm Product CSS6 Three Article 09-7119 CSS6 One • 6 1⁄2” Polypropylene Cone Woofer with Butyl Rubber Surround • Pivoting 1”Liquid Cooled Silk Dome Tweeter with Neodymium Magnet • Timbre-Matched to AIM8 One, CRS8 One, MT8 One and MT One • Efficiency: 92dB 1W/1m • Power Recommendations: 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 50Hz - 20kHz ±2dB • Dimensions (L x H x D): 22.3 x 22.3 x 9.6 cm • Cut-out: 18.1 x 18.1 cm Product CSS6 One Article 09-7120 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD AIM DT speaker offers a critical solution in many situations. Bathrooms, hallways, laundry rooms and walk-in closets are all places where music would be welcome but the cost of the speakers and the installation or the space limitation may all be deal breakers. SpeakerCraft created the DT concept to address this challenge. No need to have a separate amplifier for a mono signal, no circuit to blend both channels together, no cancellation from simply throwing a “Y” cord into the mix, just hook up both the left and right channels and let it rock. Now we proudly announce two new DT products to the line, the AIM 7 DT and AIM 8 DT. These both offer the ingenuity of the original DT models with the addition of being able to pivot the entire speaker and aim it toward the listening area. Think of the applications you can now address and truly make it a “whole house” system. AIM DT Dual Tweeter Speaker Systems All In-Ceiling Speakers Feature: • Aluminum Grilles • 100% weather-resistant • Paint masks included • No mounting brackets required • Optional Sound Enclosures and New Construction Brackets available • Exclusive SpeakerCraft WavePlaneTM technology aids in high frequency dispersion (on equipped models)   16 - SpeakerCraft  Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker 8” AIM DT In - Ceiling Speakers AIM8 DT Three • 8” Pivoting Aluminum Cone Woofer • Dual 1” Aluminum Dome Tweeters • Efficiency: 91dB 1W/1m • Power Recommendations: 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 45Hz - 20kHz • Diameter x Depth: 29.1 x 14.7 cm • Cut-out Diameter: 24.8 cm Product AIM DT Three Article 09-7854 AIM8 DT One • 8” Pivoting Polypropylene Cone Woofer • Dual 1” Silk Dome Tweeters • Efficiency: 91dB 1W/1m • Power Recommendations: 5 - 80 watts (undistorted) • Impedance: 8Ω • Frequency Response: 48Hz - 20kHz • Diameter x Depth: 29.1 x 14.7 cm • Cut-out Diameter: 24.8 cm Product AIM8 DT One Article 09-7855 DT8 Zero • 8” Polypropylene Cone Woofer with Dual Voice Coil and Urethane Surround • Dual 1⁄2” Liquid Cooled Polyamide Dome Tweeters • Efficiency: 91dB 1W/1m • Power Recommendations: 5 - 70 watts (undistorted) • Impedance: 8Ω • Frequency Response: 55Hz - 20kHz ± 4dB • Diameter x Depth: 30.3 x 9.9 cm • Cut-out Diameter: 24.8 cm Product DT8 Zero Article 09-7856 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD 6-7” AIM DT In-Ceiling Speakers AIM7 DT Three • 7” Pivoting Aluminum Cone Woofer • Dual 1” Aluminum Tweeters • Efficiency : 91dB 1W/1m • Power Recommendations : 5 - 60 watts (undistorted) • Impedance : 8Ω • Frequency Response : 55Hz - 20kHz • Diameter x Depth: 24.9 x 12.1 cm • Cut-out Diameter: 21 cm Product AIM7 DT Three Article 09-7147 AIM7 DT One • 7” Pivoting Polypropylene Cone Woofer • Dual 1” Silk Dome Tweeters • Efficiency : 91dB 1W/1m • Power Recommendations : 5 - 60 watts (undistorted) • Impedance : 8Ω • Frequency Response : 55Hz - 20kHz • Diameter x Depth: 24.9 x 10.8 cm • Cut-out Diameter: 21 cm Product AIM7 DT One Article 09-7857 DT6 Zero • 61⁄2” Polypropylene Cone Woofer with Dual Voice Coil and Rubber Surround • Dual 1⁄2” Liquid Cooled Polyamide Dome Tweeters • Efficiency: 91dB 1W/1m • Power Recommendations: 5 - 60 watts (undistorted) • Impedance: 8Ω • Frequency response: 60Hz - 20kHz ± 4dB • Diameter x Depth: 24.9 x 8.9 cm • Cut-out Diameter: 21 cm   18 - SpeakerCraft  Product DT6 Zero Article 09-3505 Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker AIM Wide Ceiling speakers have become the first choice for the majority of consumers who are interested in home theater or multi-room installations. At SpeakerCraft, we have addressed this demand in a variety of different models. The new AIM WIDE was originally intended for creating a diffused rear sound field in a home theater. However, it has become clear that customers are just as interested in using them for high-performance multi-room installations. The AIM WIDE has the same footprint and woofers as the AIM 8. However, the rest of the speaker is a huge departure from that familiar format. A unique dual mid-tweeter module is mounted directly over the woofer with two 2-inch dome midrange drivers and two 1-inch dome tweeters facing 70 degrees off access from each other. The result is ultra-wide dispersion with tremendous fidelity. You will find numerous applications for all three AIM WIDE models. Imagine them in your next installation. AIM Wide Wide angle system Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD 8” AIM Wide In-Ceiling Speakers AIM Wide Five • Dual 3⁄4” Pivoting Aluminum Dome Tweeters • Dual 2” Midrange Kevlar Cone Woofers • 8” Pivoting Kevlar Cone Woofer • Efficiency : 91dB 1W/1m • Power Recommendations : 5 - 150 watts (undistorted) • Impedance : 8Ω • Frequency Response : 33Hz - 20kHz • Diameter x Depth : 29.1 x 16.6 cm • Cut-out Diameter : 24.8 cm Product AIM Wide Five Article 09-7858 AIM Wide Three • Dual 3⁄4” Pivoting Aluminum Dome Tweeters • Dual 2” Midrange Aluminum Cone Woofers • 8” Pivoting Aluminum Cone Woofer • Efficiency : 91dB 1W/1m • Power Recommendations : 5 - 150 watts (undistorted) • Impedance : 8Ω • Frequency Response : 37Hz - 20kHz • Diameter x Depth : 29.1 x 16.6 cm • Cut-out Diameter : 24.8 cm Product AIM Wide Three Article 09-7859 AIM Wide One • Dual 3⁄4” Silk Dome Tweeters • Dual 2” Midrange IMG Cone Woofers • 8” Pivoting IMG Cone Woofer • Efficiency : 88dB 1W/1m • Power Recommendations : 5 - 125 watts (undistorted) • Impedance : 8Ω • Frequency Response : 40Hz - 20kHz • Diameter x Depth : 29.1 x 16.6 cm • Cut-out Diameter : 24.8 cm   20 - SpeakerCraft  Product AIM Wide One Article 09-7860 Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker AccuFit Series The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions in the specific building’s walls or ceiling. It may be a matter of sound penetrating an adjoining wall, unique code restrictions or simply the customer’s requirements. SpeakerCraft offers a number of sound enclosures to address many of these situations but there are space restrictions that negate this option. The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation N ew pr od uc t application. Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD AccuFit CRS Enclosed speaker AccuFit CRS7 In-Ceiling Speakers AccuFit CRS7 Three • 3⁄4” Pivoting Aluminum Dome Tweeter • 7” Aluminum Cone Woofer • Efficiency : 91dB 1W/1m • Power Recommendations : 5 - 90 watts (undistorted) • Impedance : 8Ω • Frequency Response : 60Hz - 20kHz • Diameter x Depth: 25.1 x 7 cm 09-7861 pr AccuFit CRS7 Three Article N ew Product od uc t • Cut-out Diameter: 21 cm AccuFit CRS7 One • 3⁄4” Pivoting Silk Dome Tweeter • 7” Polypropylene Cone Woofer • Efficiency : 90dB 1W/1m • Power Recommendations : 5 - 90 watts (undistorted) • Impedance : 8Ω • Frequency Response : 65Hz - 20kHz • Diameter x Depth: 25.1 x 7 cm   22 - SpeakerCraft  pr 09-7862 ew AccuFit CRS7 One Article N Product od uc t • Cut-out Diameter: 21 cm Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker AccuFit Series The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions in the specific building’s walls or ceiling. It may be a matter of sound penetrating an adjoining wall, unique code restrictions or simply the customer’s requirements. SpeakerCraft offers a number of sound enclosures to address many of these situations but there are space restrictions that negate this option. The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation N ew pr od uc t application. Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD AccuFit DT Enclosed Stereo speaker AccuFit DT7 In-Ceiling Speakers AccuFit DT7 Three • Dual 3⁄4” Aluminum Dome Tweeters • 7” Aluminum Cone Woofer • Efficiency : 91dB 1W/1m • Power Recommendations : 5 - 90 watts (undistorted) • Impedance : 8Ω • Frequency Response : 60Hz - 20kHz • Diameter x Depth: 25.1 x 7 cm 09-7452 pr AccuFit DT7 Three Article N ew Product od uc t • Cut-out Diameter: 21 cm AccuFit DT7 One • Dual 3⁄4” Silk Dome Tweeters • 7” Polypropylene Cone Woofer • Efficiency : 90dB 1W/1m • Power Recommendations : 5 - 90 watts (undistorted) • Impedance : 8Ω • Frequency Response : 65Hz - 20kHz • Diameter x Depth: 25.1 x 7 cm   24 - SpeakerCraft  pr 09-7453 ew AccuFit DT7 One Article N Product od uc t • Cut-out Diameter: 21 cm Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker AccuFit Series AccuFit CRS7 One / Three; AccuFit DT7 One / Three Overall Diameter : 252 mm Cut-out Diameter : 210 mm 72 mm 69 mm 78 mm Coupe : Ceilling AccuFit Ultra Slim One / Three Overall Diameter : 252 mm Cut-out Diameter : 210 mm 52 mm 50 mm 58 mm Coupe : Ceilling Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD AccuFit Ultra Slim Series The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions in the specific building’s walls or ceiling. It may be a matter of sound penetrating an adjoining wall, unique code restrictions or simply the customer’s requirements. SpeakerCraft offers a number of sound enclosures to address many of these situations but there are space restrictions that negate this option. The AccuFit Ultra Slim series of shallow depth full enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any t installation application. od pr ew N Ultra Slim enclosed speaker uc AccuFit Ultra Slim   26 - SpeakerCraft  Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker AccuFit Ultra Slim In - Ceiling Speakers AccuFit Ultra Slim Three • 3⁄4” Aluminum Dome Tweeter • Two 3” Cumstom Aluminum Cone Woofers • Two 3” Cumstom Aluminum Cone Midrange Drivers • Efficiency: 90dB 1W/1m • Power Recommendations: 60 watts (undistorted) • Impedance: 8Ω • Frequency Response: 90Hz - 20kHz • Diameter x Depth: 25.2 x 5.1 cm pr 09-7372 ew AccuFit Ultra Slim Three Article N Product od uc t • Cut-out Diameter: 21 cm AccuFit Ultra Slim One • 3⁄4” Pivoting Silk Dome Tweeter • Two 3” Cumstom Polypropylene Cone Woofers • Two 3” Cumstom Polypropylene Cone Midrange Drivers • Efficiency: 89dB 1W/1m • Power Recommendations: 60 watts (undistorted) • Impedance: 8Ω • Frequency Response: 90Hz - 20kHz • Diameter x Depth: 25.2 x 5.1 cm pr 09-7373 ew AccuFit Ultra Slim One Article N Product od uc t • Cut-out Diameter: 21 cm Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD AccuFit Ultra Slim In-Ceiling Speakers AccuFit Ultra Slim Three   28 - SpeakerCraft  Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker In-Wall Home Theater Speaker As built in higher performance home theaters are installed around the world, we are finding that more customers are demanding front channel speakers with greater fidelity and higher sound pressure levels than ever before. And, here is our answer. The AIM Cinema Monitors are bigger, better and badder than anything in the category. These speakers utilize the equivalent of an AIM LCR on a pivoting sub-baffle for the mid-bass, midrange and high frequencies. Below that are two high performance 6-inch woofers on a separate stationary sub-baffle to increase output and extend the low frequencies. Available in models ONE, THREE and FIVE, now the incredible impact and dynamics necessary in today’s home theater are available in a package that still mounts entirely in the wall. AIM Cinema In-Wall Home Theater Speaker Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD AIM Cinema In-Wall Speakers AIM Cinema Five • Two 6” Paper cone woofers with Kevlar fibers • Two 5” Pivoting Kevlar Cone Woofers with Phasing Cones • Pivoting 1” Aluminum Dome Tweeter • Front mounted switches allow for up to ±3dB of Bass, Middle and Treble adjustment • Efficiency : 91dB 1W/1m • Power Recommendations : 5 - 200 watts (undistorted) • Impedance : 8Ω • Frequency Response : 35Hz - 20kHz ±3dB • Dimensions : H 77.7 x W 23.5 x D 10.2 cm pr 09-7863 ew AIM Cinema Five Article N Product od uc t • Wall Cut-out Dimensions : H 73.1 x W 19.1 cm AIM Cinema Three • Two 6” Paper cone woofers with Kevlar fibers • Two 5” Pivoting Aluminum Cone Woofers with Phasing Cones • Pivoting 1” Aluminum Dome Tweeter • Front mounted switches allow for up to ±3dB of Bass, Middle and Treble adjustment • Efficiency : 86dB 1W/1m • Power Recommendations : 5 - 175 watts (undistorted) • Impedance : 8Ω • Frequency Response : 39Hz - 20kHz ±3dB • Dimensions : H 77.7 x W 23.5 x D 10.2 cm pr 09-7864 ew AIM Cinema Three Article N Product od uc t • Wall Cut-out Dimensions : H 73.1 x W 19.1 cm AIM Cinema One • Two 6” Paper cone woofers with Kevlar fibers • Two 5” Pivoting Injection Molded Graphite Cone Woofers with Phasing Cones • Pivoting 1” Silk Dome Tweeter • Front mounted switche allow for up to ±3dB of Bass adjustment • Efficiency : 85dB 1W/1m • Power Recommendations : 5 - 125 watts (undistorted) • Impedance : 8Ω • Frequency Response : 40Hz - 20kHz ±3dB • Dimensions : H 77.7 x W 23.5 x D 10.2 cm   30 - SpeakerCraft  od pr 09-7865 ew AIM Cinema One Article N Product uc t • Wall Cut-out Dimensions : H 73.1 x W 19.1 cm Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker Pivotating In-Wall Home Theater Speaker Building on the award winning AIM series of fully pivoting ceiling speakers, the new in-wall AIM LCR series dramatically improves flexibility of in-wall applications. With a dual woofer and a single dome tweeter configuration, the in-wall AIM pivots side to side or up and down (depending on vertical or horizontal installation) by 17°. The pivoting tweeters can be angled an additional 30°. This allows physical tow-in or vertical adjustments while remaining completely flush in the wall. This proprietary feature sets the AIM LCR apart from all other in-wall offerings in the industry. The In-wall AIM LCR will be available in two models with the same driver configuration. The AIM LCR One features two 51⁄4 inch injection molded graphite cone woofers with phasing plugs and a single 1 inch silk dome tweeter. The AIM LCR Three upgrades to dual 51⁄4 inch aluminum cone woofers with phasing plugs and a single aluminum dome tweeter. With the number of flat panel displays and full in-wall home theaters being installed today, the inwall AIM LCR is a perfect solution for the entire front sound stage left, center and right. AIM LCR Pivotating In-Wall Home Theater Speaker Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD AIM LCR In-Wall Speakers AIM LCR 5 • Pivoting Woofer Baffle • Two 51⁄4” Kevlar Cone Woofers with Phasing Cones • Pivoting 1” Aluminum/Magnesium Dome Tweeter • Front mounted switches allow for up to ±3dB of Bass and Treble adjustment • Efficiency : 91dB 1W/1m • Power Recommendations : 5 - 100 watts (undistorted) • Impedance : 8Ω • Frequency Response : 48Hz - 20kHz ±3dB • Dimensions : H 40.8 x W 24.2 x D 10.2 cm • Wall Cut-out Dimensions : H 36.2 x W 19.1 cm Product AIM LCR 5 Article 09-7866 AIM LCR 3 • Pivoting Woofer Baffle • Two 51⁄4” Aluminum/Magnesium Cone Woofers with Phasing Cones • Pivoting 1” Aluminum/Magnesium Dome Tweeter • Front mounted switches allow for up to ±3dB of Bass and Treble adjustment • Efficiency : 90dB 1W/1m • Power Recommendations : 5 - 100 watts (undistorted) • Impedance : 8/6Ω depending on switch settings • Frequency Response : 50Hz - 20kHz ±3dB • Dimensions : H 40.8 x W 24.2 x D 10.2 cm • Wall Cut-out Dimensions : H 36.2 x W 19.1 cm Product AIM LCR 3 Article 09-7139 AIM LCR 1 • Pivoting Woofer Baffle • Two 51⁄4” Injection Molded Graphite Cone Woofers with Phasing Cones • Pivoting 1” Silk Dome Tweeter • Efficiency : 89dB 1W/1m • Power Recommendations : 5 - 80 watts (undistorted) • Impedance : 8Ω • Frequency Response : 55Hz - 20kHz ±3dB • Dimensions : H 40.8 x W 24.2 x D 10.2 cm • Wall Cut-out Dimensions : H 36.2 x W 19.1 cm   32 - SpeakerCraft  Product AIM LCR 1 Article 09-7138 Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker AIM LCR In-Wall Speakers AIM LCR3 Five • Pivoting Woofer Baffle • Two 3” Kevlar Cone Woofers with Phasing Cones • Pivoting 1” Aluminum/Magnesium Dome Tweeter • Front mounted switche allow for up to ±3dB of Treble adjustment • Efficiency: 86dB 1W/1m • Power Recommendations: 5-60 watts (undistorted) • Impedance: 8Ω • Frequency Response: 60Hz - 20kHz • Dimensions: H 25.4 x W 14.6 x D 7.3 cm • Wall Cut-out Dimensions: H 22.9 x W 12.1 cm Product AIM LCR3 Five Article 09-7867 AIM LCR3 Three • Pivoting Woofer Baffle • Two 3” Aluminum Cone Woofers with Phasing Cones • Pivoting 1” Aluminum Dome Tweeter • Front mounted switche allow for up to ±3dB of Treble adjustment • Efficiency: 86dB 1W/1m • Power Recommendations: 5 - 60 watts (undistorted) • Impedance: 8Ω • Frequency Response: 78Hz - 20kHz ±3dB • Dimensions: H 25.4 x W 14.6 x D 7.3 cm • Wall Cut-out Dimensions: H 22.9 x W 12.1 cm Product AIM LCR3 Three Article 09-7868 AIM LCR3 One • Pivoting Woofer Baffle • Two 3” Injection Molded Graphite Cone Woofers with Phasing Cones • Pivoting 1” Silk Dome Tweeter • Efficiency: 85dB 1W/1m • Power Recommendations: 5 - 60 watts (undistorted) • Impedance: 8Ω • Frequency Response: 80Hz - 20kHz ±3dB • Dimensions: H 25.4 x W 14.6 x D 7.3 cm • Wall Cut-out Dimensions: H 22.9 x W 12.1 cm Product AIM LCR3 One Article 09-7869 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD Dipole In-Wall Home Theater Speaker Creating a diffused sound field for rear channel surround has become critical to mimic the array of speakers along the side and back walls of a traditional movie theater. The new AIM Cinema DiPole does this in a very elegant format. Each speaker has two 51⁄4 inch drivers and two 1-inch dome tweeters placed 50 degrees off-axis from each other. Two switchable settings allow the speaker to operate in either a bipole configuration or in opposite polarity as a dipole to create the desired null at the listening area. In the second position there is a circuit to boost bass response, which would normally be lost in the cancellation through the opposite output from the two woofers. The drivers are mounted in a baffle that has been carefully molded with graceful curves and angles to avoid any sharp reflections. The result is a piece of acoustic artwork that is impressive in both its style and its performance. Available in three models, the AIM Cinema DiPole is destined to become a classic. AIM Dipole Dipole In-Wall Home Theater Speaker   34 - SpeakerCraft  Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker AIM Dipole In-Wall Speakers AIM Dipole Five • Two 51⁄4” Kevlar Cone Woofers with Phasing Cones • Two Pivoting 1” Aluminum/Magnesium Dome Tweeter • Front mounted Bipole, Diole, QFX, Beam Stiring, Bass and Treble adjustment Switches • Efficiency: Bipole 89dB 1W/1m / Dipole 82dB 1W/1m • Power Recommendations: 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 48Hz - 20kHz ±3dB • Dimensions: H 44.3 x W 23.5 x D 8.3 cm • Wall Cut-out Dimensions: H 39.8 x W 19.1 cm Product AIM Dipole Five Article 09-7870 AIM Dipole Three • Two 51⁄4” Aluminum Cone Woofers with Phasing Cones • Two Pivoting 1” Aluminum Dome Tweeter • Front mounted Bipole, Diole, QFX, Bass and Treble adjustment Switches • Efficiency: Bipole 90dB 1W/1m / Dipole 82dB 1W/1m • Power Recommendations: 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 50Hz - 20kHz ±3dB • Dimensions: H 44.3 x W 23.5 x D 8.3 cm • Wall Cut-out Dimensions: H 39.8 x W 19.1 cm Product AIM Dipole Three Article 09-7871 AIM Dipole One • Two 51⁄4” Injection Molded Graphite Cone Woofers with Phasing Cones • Two Pivoting 1” Silk Dome Tweeter • Front mounted Bipole, Diole, QFX adjustment Switches • Efficiency: Bipole 89dB 1W/1m / Dipole 81dB 1W/1m • Power Recommendations: 5 - 80 watts (undistorted) • Impedance: 8Ω • Frequency Response: 55Hz - 20kHz ±3dB • Dimensions: H 44.3 x W 23.5 x D 8.3 cm • Wall Cut-out Dimensions: H 39.8 x W 19.1 cm Product AIM Dipole One Article 09-7872 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD AccuFit Shallow Speaker The finest flush-mount speakers in the world are useless if they cannot be installed due to restrictions in the specific building’s walls or ceiling. It may be a matter of sound penetrating an adjoining wall, unique code restrictions or simply the customer’s requirements. SpeakerCraft offers a number of sound enclosures to address many of these situations but there are space restrictions that negate this option. The AccuFit series of shallow depth full enclosed architectural speakers ensures that the drivers have the proper amount of air space to deliver the best sound performance regardless of the installation environment. This new line of technically advanced speakers will fit just about any installation uc t application.   36 - SpeakerCraft  pr ew N Shallow speakers od AccuFit IW7 Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker AccuFit IW7 In-Wall Speakers AccuFit IW7 Three • 7” Aluminum Cone Woofer • 1” Pivoting Aluminum Dome Tweeter • Efficiency: 91dB 1W/1m • Power Recommendations: 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 55Hz - 20kHz ±3dB • Dimensions: H 36.8 x W 25.1 x D 7 cm pr 09-7873 ew AccuFit IW7 Three Article N Product od uc t • Wall Cut-out Dimensions: H 32.4 x W 20.6 cm AccuFit IW7 One • 7” Injection Molded Graphite Cone Woofer • 3⁄4” Pivoting Silk Dome Tweeter • Efficiency: 91dB 1W/1m • Power Recommendations: 5 - 90 watts (undistorted) • Impedance: 8Ω • Frequency Response: 60Hz - 20kHz ±3dB • Dimensions: H 36.8 x W 25.1 x D 7 cm pr 09-7874 ew AccuFit IW7 One Article N Product od uc t • Wall Cut-out Dimensions: H 32.4 x W 20.6 cm Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD Pivotating In-Wall Speaker Building on the succes of the AIM LCR, the AIM7 MT series is also an in-wall speaker with a fully pivoting baffle allowing the installer to toe-in the left and right speaker for better stereo imaging. They feature seven-inch woofers , a substantial improvement over the six-inch driver in the original MT6, as well as an offset, independently pivoting tweeter. They play louder, deeper and with more authority than the MT6 and at the exact same price. AIM7 MT Pivotating In-Wall Speaker   38 - SpeakerCraft  Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker AIM7 MT In-Wall Speakers AIM7 MT Four • 7” Aluminum/Magnesium Cone Woofer with Dual Voice Coil and Rubber Surround • Pivoting 1” Aluminum/Magnesium Dome Tweeter • Front Mounted Switches Allow for up to ± 3dB of Bass and Treble Equalization • Timbre-Matched to AIM8/7 Four, CRS8/6 Four and MT8 Four • Efficiency: 92dB 1W/1m • Power Recommendations: 5 - 150 watts (undistorted) • Impedance: 8/6Ω depending on switch position • Frequency Response: 37Hz - 20kHz ±3dB • Dimensions: H 36.9 x W 25.1 x D 10.2 cm • Wall Cut-out Dimensions: H 33.1 x W 21 cm Product AIM7 MT Four Article 09-7418 AIM7 MT Three • 7” Aluminum Cone Woofer with Dual Voice Coil and Rubber Surround • Pivot ing 1” Aluminum Dome Tweeter • Front Mounted Switches Allow for up to ± 3dB of Bass and Treble adjustment • Timbre-Matched to AIM8/7 Three, TIME Three, CRS8/6 Three, MT8 Three and AIM LCR 3 • Efficiency: 91dB 1W/1m • Power Recommendations: 5 - 125 watts (undistorted) • Impedance: 8/6Ω depending on switch position • Frequency Response: 40Hz - 20kHz ±3dB • Dimensions: H 36.9 x W 25.1 x D 10.2 cm • Wall Cut-out Dimensions: H 33.1 x W 21 cm Product AIM7 MT Three Article 09-7419 AIM7 MT Two • 7” Glass Composite Cone Woofer with Rubber Surround • Pivoting 1” Silk Dome Tweeter • Front mounted Switch allows for up to ± 3dB of Treble adjustment • Timbre-Matched to AIM8 Two, CRS8 Two, AIM7 Two and MT8 Two • Efficiency: 90dB 1W/1m • Power Recommendations: 5 - 125 watts (undistorted) • Impedance: 8Ω • Frequency Response: 40Hz - 20kHz ±3dB • Dimensions: H 36.9 x W 25.1 x D 10.2 cm • Wall Cut-out Dimensions: H 33.1 x W 21 cm Product AIM7 MT Two Article 09-7420 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD AIM7 MT In-Wall Speakers AIM7 MT One • 7” Polypropylene Cone Woofer with Rubber Surround • Pivoting 1” Silk Dome Tweeter • Timbre-Matched to AIM8 One, TIME One, CRS8/6 One, CSS6 One, MT8 One and AIM LCR 1 • Efficiency: 92dB 1W/1m • Power Recommendations : 5 - 100 watts (undistorted) • Impedance : 8Ω • Frequency Response: 40Hz - 20kHz ±3dB • Dimensions : H 36.9 x W 25.1 x D 10.2 cm • Wall Cut-out Dimensions : H 33.1 x W 21 cm   40 - SpeakerCraft  Product AIM7 MT One Article 09-7421 Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker HIGH FIDELITY SpeakerCraft created the MT series, the first truly high-end in-wall speaker. Using inwall speakers for critical listening or as front channels in a home theater system was not a thought that many had considered. In developing the series, SpeakerCraft engineers virtually re-invented the in-wall speaker, solving the many problems that have traditionally been inherent in their design. A very unique innovation in the series is the “Uni-Pivot” midrange and tweeter unit. It holds both a tweeter and midrange that can be directed together as one toward the sweet spot in any listening area. The “Uni-Pivot” design smooths out the frequency response and crossover transition. We have won awards with this design and were not only the first to incorporate the world’s first pivoting midrange/tweeter array, but it still remains the best sounding today. On some models, additional refinement of frequency balance can be achieved by pressing the front mounted buttons. The bass, midrange and treble on these models can be independently adjusted up to 6dB, allowing the listener to fine-tune the speaker to any environment. MT In-Wall Speakers Mirror Image Technology, In-Wall Speaker Systems AcoustaCellTM System In developing the 8-inch MT series, we didn’t stop with the speaker. We realized the biggest problem with in-wall speakers is not the speaker, it’s the wall. No other manufacturer has ever addressed the problem of the wall cavity so thoroughly as SpeakerCraft. The end result was the creation of a precision sonic chamber designed to enhance the speakers. AcoustaCellTM, the revolutionary wall dampening system, is a blend of sound absorbing materials that blocks sound passing through drywall, dampens drywall resonance, stops standing waves, blocks Helmholtz resonance and dissipates back waves. Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD 8” MT In-Wall Speakers MT8 Four • Include AcoustaCellTM 8 System • 8” Aluminum/Magnesium Cone Woofer with Phasing Dome • 21⁄2” Aluminum/Magnesium Dome Uni-Pivot Midrange • 1” Aluminum/Magnesium Dome Uni-Pivot Tweeter • Front mounted buttons allow for up to ±3dB of Bass, Midrange & Treble adjustment • Timbre-Matched to AIM8 Four, CRS8 Four, CRS Four and MT Four • Efficiency : 90dB 1W/1m • Power Recommendations : 5 - 200 watts (undistorted) • Impedance : 8/6/4Ω depending on button settings • Frequency Response : 38Hz - 22kHz ±2dB • Dimensions : H 42.2 x W 27 x D 10 cm • Wall Cut-out Dimensions : H 38.5 x W 23.2 cm Product MT8 Four Article 09-7094 MT8 Three • Include AcoustaCellTM 8 System • 8” Aluminum Cone Woofer • 21⁄2” Aluminum Dome Uni-Pivot Midrange • 1” Aluminum Dome Uni-Pivot Tweeter • Front mounted buttons allow for up to ±3dB of Bass, Midrange & Treble adjustment • Timbre-Matched to AIM8 Three, CRS8 Three, CRS Three and MT Three • Efficiency : 90dB 1W/1m • Power Recommendations : 5 - 200 watts (undistorted) • Impedance : 8/6/4Ω depending on button settings • Frequency Response : 39Hz - 20kHz ±2dB • Dimensions : H 42.2 x W 27 x D 9.6 cm • Wall Cut-out Dimensions : H 38.5 x W 23.2 cm   42 - SpeakerCraft  Product MT8 Three Article 09-7095 Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker 8” MT In-Wall Speakers MT8 Two • Does Not Include AcoustaCellTM 8 System • 8” Glass Composite Cone Woofer • 21⁄2” Glass Composite Cone Uni-Pivot Midrange • 1” Glass Composite Dome Uni-Pivot Tweeter • Front mounted buttons allow for up to ±3dB of Bass, Midrange & Treble adjustment • Timbre-Matched to AIM8 Two, CRS8 Two, CRS Two and MT Two • Efficiency: 90dB 1W/1m • Power Recommendations: 5 - 125 watts (undistorted) • Impedance: 8/6/4Ω depending on button settings • Frequency Response: 40Hz - 20kHz ±2dB • Dimensions: H 42.2 x W 27 x D 9.6 cm • Wall Cut-out Dimensions: H 38.5 x W 23.2 cm Product MT8 Two Article 09-7096 MT8 One • Does Not Include AcoustaCellTM 8 System • 8” Polypropylene Cone Woofer • 21⁄2” Polypropylene Cone Uni-Pivot Midrange • 3⁄4” Treated Silk Dome Uni-Pivot Tweeter • Timbre-Matched to AIM8 One, CRS8 One, CRS One and MT One • Efficiency: 90dB 1W/1m • Power Recommendations: 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 40Hz - 20kHz ±2dB • Dimensions: H 42.2 x W 27 x D 10.2 cm • Wall Cut-out Dimensions: H 38.5 x W 23.2 cm Product MT8 One Article 09-7097 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD 6” MT In-Wall Speakers MT6 Four • 61⁄2” Aluminum/Magnesium Cone Woofer with Dual Voice Coil and Filleted Rubber Surround • Pivoting 1” Aluminum/Magnesium Dome Tweeter • Front mounted buttons allow for up to ±3dB of Bass and Treble adjustment • Timbre-Matched to AIM8 Four, CRS8 Four, CRS Four and MT Four • Efficiency: 90dB 1W/1m • Power Recommendations : 5 - 150 watts (undistorted) • Impedance : 8/6/4Ω depending on switch position • Frequency Response: 37Hz - 20kHz ±2dB • Dimensions : H 31.1 x W 20.8 x D 8.1 cm • Wall Cut-out Dimensions : H 27.3 x W 17.2 cm Product MT Four Article 09-3511 MT6 Three • 61⁄2” Aluminum Cone Woofer with Dual Voice Coil and Filleted Rubber Surround • Pivoting 1” Aluminum Dome Tweeter • Front mounted buttons allow for up to ±3dB of Bass and Treble adjustment • Timbre-Matched to AIM8 Three, CRS8 Three, CRS Three and MT Three • Efficiency : 90dB 1W/1m • Power Recommendations : 5 - 125 watts (undistorted) • Impedance : 8/6/4 Ω depending on switch position • Frequency Response : 40Hz - 20kHz ±2dB • Dimensions : H 31.1 x W 20.8 x D 8 cm • Wall Cut-out Dimensions : H 27.3 x W 17.2 cm Product MT Three Article 09-3512 MT6 Two • 61⁄2” Glass Composite Cone Woofer with Filleted Rubber Surround • Pivoting 1” Silk Dome Tweeter • Front mounted buttons allow for up to ±3dB of Treble adjustment • Timbre-Matched to AIM8 Two, CRS8 Two, CRS Two and MT Two • Efficiency : 92dB 1W/1m • Power Recommendations : 5 - 120 watts (undistorted) • Impedance : 8Ω • Frequency Response : 40Hz - 20kHz ±2dB • Dimensions : H 31.1 x W 20.8 x D 7.8 cm • Wall Cut-out Dimensions : H 27.3 x W 17.2 cm   44 - SpeakerCraft  Product MT Two Article 09-3513 Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker 6” MT In-Wall Speakers MT6 One • 61⁄2” Polypropylene Cone Woofer with Filleted Rubber Surround • Pivoting 1” Silk Dome Tweeter • Timbre-Matched to AIM8 One, CRS8 One, CRS One and MT8 one • Efficiency: 92dB 1W/1m • Power Recommendations: 5 - 100 watts (undistorted) • Impedance: 8Ω • Frequency Response: 40Hz - 20kHz ±2 dB • Dimensions: H 31.1 x W 20.8 x D 7.8 cm • Wall Cut-out Dimensions: H 27.3 x W 17.2 cm Product MT One Article 09-3514 MT8 Four Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD Satellite Speaker There are certain situations where the use of in-wall or in-ceiling speakers are simply not feasible. The Multiple Dwelling Unit or MDU is a perfect example. Sound transference into an adjoining unit, code restrictions that prevent cutting into the wall or ceiling surface or the use of concrete or brick in the construction process are all reasons that make a flush-mounted speaker unworkable. The SpeakerCraft MDU speaker allows for great sound reproduction in these situations with an elegant and functional solution. The speaker is mounted to the ceiling via a standard J-box or attached directly to the ceiling joist. The multi-pivot bracket allows the speaker to be aimed at the listening area from any position in the room. The ported cabinet houses a 4 inch woofer and a 3/4 inch dome tweeter that deliver a smooth and open sonic presentation. Matched to any of our freestanding subwoofers, the MDU will fill any room in a condo, town home or apartment with an incredible musical experience. AIM MDU Pivotating Satellite Speaker   46 - SpeakerCraft  Atao • Calypso • Clark Synthesis • Emphasys • ETA systems • Future Automation • Global Caché • James Loudspeaker AIM MDU Box Speakers AIM MDU • 4” Injection Molded Graphite Cone Woofer • 1” Silk Dome Tweeter • Efficiency: 87dB 1W/1m • Power Recommendations: 5 - 60 watts (undistorted) • Impedance: 8Ω • Frequency Response: 78Hz - 20kHz ±3dB • Dimensions: H 12.2 x W 18.6 x D 11 cm • Height with the multi-pivot bracket: H 22.7 cm Product AIM MDU Article 09-6515 Liberty wire & cable • Lutron • Nevo • Proficient • Rhino • Sherbourn • Speakercraft • Vantage HD Order form quantity article number description price Total : Authorized dealer client nb. company tel contact fax address mobile zip/ city e-mail web site VAT nb. date and signature tel +41 21 922 8000 • fax +41 21 922 8002 • [email protected] • www.techsupply.ch