Transcript
Thank you for your choice of COMBO amplifier of ARTECSOUND. Please read this document carefully before using the amplifier. Main concept of the COMBO BASS series - DMOS-FET POWER STAGE This Amplifier is designed with DMOS-FET speaker drive devices to provide stable and powerful sound. - Analog drive pre-amp Offers great slap sound and bass drive sound. - BASS STABILIZER B35 equipped with BASS STABILIZER function. This function makes fast grabbing of flap sound to provide stable bass play. - Chromatic Tuner (B35T, B25T) provide precision chromatic digital tuner function. - Acoustical wood work The wooden case of COMBO is made with glue and precision wood-pin process to make great sound, not like almost of small amplifiers which made with screw, nail or staple process.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
IMPORTANT SAFETY INSTRUCTIONS
- DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS. - FOR PROPER OPERATION, THIS UNIT REQUIRES 3" (75mm) OF WELL VENTILATED SPACE AROUND HEATSINKS AND OTHER AIR FLOW PROVISIONS IN THE CABINET. - DO NOT USE THIS APPARATUS NEAR SPLASHING, FALLING, SPRAYING, OR STANDING LIQUIDS. - CLEAN ONLY WITH LINT-FREE DAMP CLOTH AND DO NOT USE CLEANING AGENTS. - ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES AND COMPATIBLE WITH VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE APPARATUS. - PROTECT THE POWER CORD FROM DAMAGE DUE TO BEING WALKED ON, PINCHED, OR STRAINED. - UNPLUG THE APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME. - ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR SAFE OPERATION AND TO AVOID INJURY. - WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. - SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL. - OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH SOUND PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND EAR PROTECTION IS RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME. - APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND THAT NO OBJECT FILLED WITH LIQUIDS, SUCH AS VASES SHELL BE PLACED ON THE APPARATUS. - THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. - A WARNING THAT AN APPARATUS WITH CLASS 1 CONSTRUCTION SHALL BE CONNECTED TO A MAINS SOCKET OUTLET WITH A PROTECTIVE COATING CONNECTIONS.
BASS COMBO SERIES Model
35W
25W
BASIC
B35S
B25S
TUNER
B35T
B25T
OPERATING INSTRUCTIONS
JACKS
[TUNER] model 1. INPUT (-15dB) :
Input for active circuit equipped bass guitar or booster output.
2. INPUT (0dB) :
Input for passive circuit equipped bass guitar.
3. PHONES, REC jack : Connects earphones, using stereo 1/4" plug. Connects stereo or mono mini plug(1/4") for line out to the other amp or recorder. 4. AUX INPUT jack : Connects stereo mini plug(1/4") from music output of MP3, CDP or PC BASS STABILIZER 1. FLAP ABSOLBER : Adjust the grab level < min : free> 2. PEAK INDICATOR: Shows peak detection ACTIVE EQUALIZER 1. CONTOUR :
[BASIC] model
Adjust tone shape < - : clean and bright > <+ : warm >
2. CLIP :
Adjust [NORMAL] channel volume.
3. BASS :
Adjust level of low frequency range.
4. MIDDLE :
Adjust level of middle frequency range.
5. FREQ :
Adjust the frequency range of middle control.
6. TREBLE :
Adjust level of high frequency range.
7. VOLUME :
Controls master volume.
TUNER FUNCTION 1. TUNER SWITCH : On/ off tuner function. (Notice : Mute the output automatically when tuner is ON.) POWER 1. POWER SWITCH : Switching the power on/off. Make sure that the volume control is set to zero position before power on and off to reduce damage to amplifier and/or hearing ability 2 . AC INLET (Back panel) : Plug the AC power
Model Dimension(mm) Speaker Output (RMS) Power consuption
B35S, B35T D220 / H400 / W360 1 X 10 inch, 8ohm 35 watt 77 VA
B25S, B25T D220 / H320 / W360 1 X 10 inch, 8ohm 25 watt 55 VA
3. FUSE HOLDER (Back panel) : Fuse for AC power
VOLTAGE 100V ~ 125 V 210V ~ 240 V
FUSE 1 A / 250 V 0.5A/250 V
