Transcript
TX5000™ U/UTP Copper Cable S P E C I F I C AT I O N S H E E T
specifications Category 5 cable shall meet the ANSI/TIA-568-C.2 and ISO 11801 Category 5 component standards. The conductors shall be 24 AWG with HDPE insulation. The copper conductors shall be twisted in pairs, separated by an integrated pair separator, and covered with a UV- and abrasion-resistant PVC jacket.
technical information Electrical performance:
Certified channel performance in a 4-connector configuration up to 100 meters and exceeds ISO 11801 Class D and ANSI/TIA-568-C.2 Category 5 standards at swept frequencies up to 100 MHz Certified component performance up to 100 meters and exceeds the component requirement of IEC 61156-5 and ANSI/TIA-568-C.2 Category 5 component standards at swept frequencies up to 100 MHz
Conductors/ insulators:
24 AWG solid bare annealed copper
Flame rating:
CM: UL 1685
Installation tension:
400 N (90 lbf) maximum
Temperature rating:
0°C to 50°C (32°F to 122°F) during installation -20°C to 60°C (-4°F to 140°F) during operation
Cable jacket:
CM: Flame-retardant PVC
Cable diameter:
25-pair: 11.8mm (0.465 in.) nominal 50-pair: 17.5mm (0.689 in.) nominal 100-pair: 24.5mm (0.964 in.) nominal
Cable weight:
25-pair: 61.7 kg/305m (136 lbs./1000 ft.) 50-pair: 146.1 kg/305m (322 lbs./1000 ft.) 100-pair: 186.9 kg/305m (412 lbs./1000 ft.)
Packaging:
305m (1000 ft.) on a reel Package tested to ISTA Procedure 1A
key features and benefits Easy payout reel
Ensures proper performance and provides quick installation; supplied 305m (1000 ft.) on a reel
Descending length cable markings
Easy identification of remaining cable reduces installation time and cable scrap
Reduced attenuation
Maximizes the amount of signal that reaches the receiver and increases bandwidth
applications TX5000 ™ U/UTP Copper Cable is a component of the Panduit ® TX5000 ™ Copper Cabling System. This end-to-end system provides Gigabit Ethernet performance with usable bandwidth beyond 100 MHz. With certified performance to the ANSI/TIA-568-C.2 Category 5 and ISO 11801 Class D standards, this system will support the following applications: • Ethernet 10BASE-T, 100BASE-T (Fast Ethernet), 1000BASE-T (Gigabit Ethernet) • 155 Mb/s ATM, 622 Mb/s ATM • Token Ring 4/16
w w w. p a n d u i t . c o m
TX5000 ™ U/UTP Multi-Pair Copper Cable 25-pair: 50-pair: 100-pair:
PUC5025WH-A PUC5050WH-A PUC50100WH-A
TX5000™ U/UTP Copper Cable additional specifications Mechanical Test
Ultimate Breaking Strength
>2500 N (562 Ibf)
Minimum Bend Radius
2x cable diameter Electrical Test
Nominal Velocity of Propagation (NVP)
67%
cable construction Conductor Wire
Conductor Wire
Conductor Insulator
Twisted Pair
Conductor Insulator
Twisted Pair
Polyester Film
Polyester Film
Sheath (PVC or LSZH)
Sheath (PVC or LSZH)
Unit (12 or 13 Pairs)
Unit (25 Pairs) Sub-Unit (3 or 4 Pairs Grouped Together)
Rip Cord
Sub-Unit (3 or 4 Pairs Grouped Together)
25 PAIR
Unit Binder Tape
50 PAIR
Conductor Wire Twisted Pair
Conductor Insulator
Polyester Film
Sheath (PVC or LSZH)
Unit (25 Pairs) Sub-Unit (3 or 4 Pairs Grouped Together)
Rip Cord
100 PAIR
Unit Binder Tape
WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario
[email protected] Phone: 800.777.3300
PANDUIT EUROPE LTD. London, UK
[email protected] Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD. Republic of Singapore
[email protected] Phone: 65.6305.7575
PANDUIT JAPAN Tokyo, Japan
[email protected] Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA Guadalajara, Mexico
[email protected] Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia
[email protected] Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
For more information Visit us at www.panduit.com Contact Customer Service by email:
[email protected] or by phone: 800.777.3300 and reference COSP205
©2011 Panduit Corp. ALL RIGHTS RESERVED.
WW-COSP205 7/2011
