Transcript
FIBER OPTIC TECHNOLOGY CALIBRATION LABORATORY
Plug-Type (Male/Female) Attenuators CBA series – Multimode Description: The plug-type CBA series multimodemode attenuators are used directly on the ends of fiberoptic jumpers prior to installation in adapters. These attenuators provide a fixed level of attenuation at defined wavelength. The CBA series multimode attenuators are available for SC, FC, LC and ST connector types. Operational wavelength is 850 nm or 1300 nm.
Features:
Precise attenuation Multimode applications Operational wavelength 850 nm or 1300 nm Attenuation range 2 – 10 dB Easy installation High power endurance
Application:
Fiberoptic systems Receiver padding for optical receiver protection Optical power equalization Linearity and dynamic range testing in laboratory equipment Optical margin testing BER testing
ATT_04-01_EN 03/04/2012 is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners. OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability. OPTOKON, a.s. Cerveny Kriz 250, 586 01 Jihlava, Czech Republic tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM,
[email protected]
1
FIBER OPTIC TECHNOLOGY CALIBRATION LABORATORY
Specifications: Parameter 2 – 10 dB 850 or 1300 nm
Attenuation range Operational wavelength Stability attenuation range 2 to 5 dB
±0.8 dB
attenuation range 6 to 10 dB
±1.0 dB
Return loss Power durability Operating temperature
>30 dB 150 mW -25 to 70 °C
Storage temperature
-40 to 80 °C
Ordering Code: CBA
-
XX
- XX - XX - XX
attenuation
connector type
02 03 04 05 06 07 08 09 10
SL PC SC LC
2 dB 3 dB 4 dB 5 dB 6 dB 7 dB 8 dB 9 dB 10 dB
ST/PC FC/PC SC/PC LC/PC
wavelength 85 13
850 nm 1300 nm
fiber type M5 MM 50/125 µm M6 MM 62.5/125 µm
Samples of Attenuators
CBA-10-PC-M6-85
CBA-10-SC-M6-85
CBA-10-SL-M6-85
CBA-03-LC-M5-85
ATT_04-01_EN 03/04/2012 is registered trademark of OPTOKON, a.s. Other names and trademarks mentioned herein may be the trademarks of their respective owners. OPTOKON, a.s. reserves the right to make changes, without notice, to the products described in this document, in the interest of improving design, operational function and/or reliability. OPTOKON, a.s. Cerveny Kriz 250, 586 01 Jihlava, Czech Republic tel. +420 564 040 111, fax +420 564 040 134, WWW.OPTOKON.COM,
[email protected]
2
