Transcript
MTC-CBT-FM1/FM2
Flush-Mount Wall Brackets for CBT Speakers
Professional Series
Key Features:
䉴 Provides Low-Profile, Close-to-Wall Mounting Brackets for JBL CBT Line Array Column Speakers 䉴 Drop-In Ease of Assembly with Set Screw(s) for Secure Installation 䉴 ROHS-Compliant Zinc Plating for Weather Resistance 䉴 For Mounting Speaker in Typical Vertical Orientation (not for Horizontal Orientation) 䉴 Available in Black or White (-WH)
MTC-CBT-FM1 䉴 For Use with CBT 50LA-1 and CBT 100LA-1. 䉴 Loudspeaker-Mount Section of bracket attaches to the included insert points on the back panel of the speaker (using the M6x15 mm bolts, flat washers & lock washers that come with the speaker). Mounting points are at 107.6 mm x 50.8 mm (4-1/4 x 2 inch) spacing. 䉴 Wall-Mount Section has 3 aligned holes vertically; 3 aligned holes horizontally. 䉴 Loudspeaker-Mount Section drops easily into Wall-Mount Section. Set screw holds securely. 䉴 2.25 mm thick (13-Gauge AWG) Metal 䉴 Bracket assembly spaces back of speaker within 16 mm (0.62 inches) of wall (typical).
Dimensional Diagrams MTC-CBT-FM1 BRACKET DIMENSIONS 3.50 [89]
2.70 [69]
0.62 [16]
1.0 [25.4]
0.25 [6.4] (x5)
5.60 [143]
1.92 [49]
5.0 [127]
4.25 [108]
6.25 [159] 1.92 [49]
0.25 [6.4] (x4)
MTC-CBT-FM2 䉴 For Use with CBT 70J-1 and CBT 70J1/70JE-1 array. 䉴 Loudspeaker-Mount Section of bracket attaches to the included insert points on the back panel of the speaker (using the M6x15 mm bolts, flat washers & lock washers that come with the speaker). Mounting points are at 254 mm x 70 mm (10 x 2-3/4 inch) spacing. 䉴 Wall-Mount Section has 3 aligned holes vertically; 3 aligned holes horizontally. 䉴 Loudspeaker-Mount Section drops easily into Wall-Mount Section. Set screw holds securely. 䉴 3.5 mm thick (10-Gauge AWG) Metal 䉴 Bracket assembly spaces back of speaker within 20 mm (0.77 inches) of wall (typical).
2.0 [51]
2.5 [64]
2.00 [51]
Loudspeaker-Mount Section
Assembled Bracket
Wall-Mount Section
MTC-CBT-FM2 BRACKET DIMENSIONS
4.6 [117]
5.3 [134]
0.77 [20]
3.0 [76] 0.25 [6.4] (x5)
1.5 [38]
3.5 [89] 11.4 [290]
7.9 [201] 11.4 [290]
10 [254]
0.25 [6.4] (x4)
3.5 [89]
3.95 [100]
1.2 [31]
2.75 [70]
Loudspeaker-Mount Section
Assembled Bracket
Wall-Mount Section
Dimensions in mm [inches]
䉴 MTC-CBT-FM1/FM2 Flush-Mount Wall Brackets for CBT Speakers Assembly
3) Slide Loudspeaker-Mount Section down Into Wall-Mount Section. Make sure the two are fully engaged.
4) Secure with included set screw through threaded hole in side of wall bracket.
1) Attach Loudspeaker-Mount Section to the insert points on back of speaker using M6 x 15 bolts, flat washers & lock washers, included with the speaker. Do not install over terminal cup. 2) Secure Wall-Mount Section Mounted onto Wall.
IMPORTANT: Brackets MUST be installed by qualified personnel in accordance with safe installation practices.
JBL Professional 8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A. © Copyright 2011 JBL Professional www.jblpro.com
SS CBT-FM CRP 07/11
