Preview only show first 10 pages with watermark. For full document please download

Cc121 New Functions

   EMBED


Share

Transcript

V1.6 New Functions CC121 New Functions Jog/Shuttle function with scrubbing The new functions of the CC121 are described below. Scrub operation is available via the Jog/Shuttle function in the AI Knob section. Cubase version 5.1.1 or later is necessary for the new functions. EQ gain inverse You can invert the gain of individual EQ bands or the entire EQ gain curve on Cubase via the EQ section. Operation is as follows. 1 Hold down [JOG] to call up the CC121 control panel window. When the window appears, release [JOG]. Operation is as follows. Individual EQ bands Hold down [EQ TYPE] and press desired [ON]. Entire EQ gain curve Hold down [ALL BYPASS] and press one of [ON]. Each [ON] has the same function in this case. The EQ gain invert function is not available while the CC121 is in the Quick Control mode. 2 Press [JOG] to switch the Jog Mode setting to [Shuttle] or [Scrub]. Each setting in the Jog Mode works as follows. For details, refer to the CC121 and Cubase Operation Manual. Jog: Works as the CC121 standard Jog/Shuttle function. Shuttle: Works as the “Shuttle speed” function on Cubase. Scrub: 2 Press [VALUE] knob to select the Bank. 3 Press [VALUE] knob to switch the Bank setting. Works as the “Jog wheel” function on Cubase. You can adjust the Jog wheel speed by the pull-down menu on the right side. The larger the number, the faster the speed. 3 Hold down [JOG] to close the CC121 control panel window. When the window closes, release [JOG]. 4 You can switch the function selected in the Bank to the “Studio Control,” ”Monitor Control,” or “User Assignable.” Operate AI KNOB. For details, refer to the CC121 Operation Manual. Switching the function in the Function section You can switch between functions by using the knob in the Function section. 4 Hold down [JOG] to close the CC121 control panel window. When the window closes, release [JOG]. Operation is as follows. 1 Hold down [JOG] to call up the CC121 control panel window. When the window appears, release [JOG]. U.R.G., Pro Audio Division © 2010 Yamaha Corporation 008MW-B0