Preview only show first 10 pages with watermark. For full document please download

Cctv Mini Vandal Dome Camera

   EMBED


Share

Transcript

CAUTION CCTV MINI VANDAL DOME CAMERA 700TVL High Resolution Mini Dome Camera RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Regulatory Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and use in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference, in which case the user will be required to correct the interference at his own expense. WARNING - Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. CAUTION : To prevent electric shock and risk of fire hazards: Do NOT use other than specified power source. Do NOT expose this appliance to rain or moisture. Yellow, Video output ② Adjust desired scene by turning and moving the CAMERA BRACKET. GND Red, Power input Unpacking ③ Put the DOME COVER over the BASE HOUSING and turn it clockwise by hand. ③ Adjust desired scene by turning and moving the CAMERA BRACKET. ④ To fix DOME COVER tight, use SET SCREW. ④ Put the DOME COVER over the BASE HOUSING and turn it clockwise by hand. Specifications Sureface Type Flush Type Image Device Installation Screws L-wrench Set Screw Ceiling processing sticker Ø88.00 mm 67 Camera Center/Centre/Centro Mittelpunkt To be symmetrically placed from the center A placer symetriquenent par rapport au centre instalar simetricamente a la perforcion del techo Symetrisch am Mittelpunkt ausrichten Center Ø67 Ø80.00 Ø57.00 Ceiling processing sticker 7 Ø6 Manual .0 0 Ø 3- Ø3.90 00 Flush Mount 9 3. 67 . 72 Ø .D Set Screw 0 58.50 C B. 60.50 37.00 Installation Screws L-wrench Signal Format Ø Surface Mount Camera ② Place the BASE HOUSING on the hole and fix it with screws supplied. Dimensions(mm) Below items should be included with the camera. Please check the items before use. Manual ① Use “Ceiling processing sticker” on the desired place to install camera and make a hole on that place. Ø57.00 Power(+) 50 Flush mount ① Fix the BASE HOUSING to the desired place with screws supplied. GND Video Out - IP66 Rating, Aluminum Die-casting Rugged Vandal proof Camera (Surface mount) - 1/3” 520K Color IT-CCD - Digital Clamp (with Anti-smear) - ACE(Digital WDR) - De-Fog - Edge Adaptive 2-D Digital Noise Reducer - Electronic IRIS - Enhanced Y/C Separator (De-Mosaic, De-Moiré) DC12V Surface mount Power and Video connection This color video camera is designed for use in monitoring systems. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAMERA BRACKET STOPPER RING DECORATION RING CAMERA BRACKET-TOP Flush Mount SCREW CAMERA AAS’Y CAMERA BRACKET-BOTTOM SUPPORT BASE HOUSING BASE HOUSING SET SCREW DOME COVER SCREW 700 TV Lines Total Pixels 518K pixels Effective Pixels 482K pixels 568K pixels Shutter Speed 1/60 ~ 120,000sec 1/50 ~ 120,000sec Sync. System S/N Ratio Video Output Surface Mount PAL 1/3" 520K Color IT-CCD Resolution Iris Control Camera Structure Specifications are subject to without notice. NTSC Temperature Power supply Humidity Power Consumption 607K pixels Internal More Than 50dB Electronic Composite ( 1.0Vp-p/75 Ohm ) -10℃ ~ +50℃ DC 12V(±10%) RH 85% MAX Max.1.5W