Transcript
CCTV
Specifications Model:
XTM010
Screen Type:
LCD
Screen Size:
2.5”
Resolution:
480 x 234
Audio: Video Inputs: Operating Voltage: Suggested Power Supply: Mounting:
No AV Socket 5V DC Rechargeable Battery (5V DC 1000mA, supplied) On Person (adjustable strap supplied), Desk (bracket supplied)
Weatherproofing:
No
Weight:
90g
Dimensions:
CCTV
TECHNICAL SUPPORT: For Technical Support for any Xvision product please contact your local distributor. LIMITED WARRANTY: This product is supplied with a 1 Year warranty. The Warranty excludes products that have been misused, (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase.
Model: XTM010 Mini CCTV Monitor with 2.5” LCD Screen
(WxHxD) 85x64x21mm
Before you begin
Manufactured exclusively for Xvision - www.x-vision.co.uk
zz Please unpack the box carefully and identify that all the parts are present.
UK/Europe Xvision Group (UK) Unit 2, Valley Point, Beddington Farm Road, Croydon Surrey CR0 4WP Email:
[email protected]
Middle East Burjuman Tower, 18th Floor PO Box 121828 Dubai 43659 United Arab Emirates Email:
[email protected]
Far East Kyoung Am Building 157-27 Samsung-dong Kangnam-ku 135 090 Seoul Korea Email:
[email protected]
North America 100 Park Avenue New York City, New York 10017 United States Email:
[email protected]
Please bear in mind the following points when handling/using the monitor. zz Do not open the unit and avoid dropping or banging the monitor against another object, as this may cause damage. zz Do not place the unit in full sunshine. zz Make sure you use only the recommended batteries or power supply. Damage caused to the unit by incorrect voltage, wiring or power supply is not covered by the warranty. zz Do not charge the battery longer than the required time. zz Ensure the unit has run out of battery power completely before it is re-charged. Charge it fully between uses to lengthen the battery’s lifespan. zz The lifespan of the battery will shorten if over-charged or discharged between uses. zz Note the battery’s working time will shorten over its lifespan. Change the battery when its working time has significantly reduced.
Model:
XTM010
Mini CCTV Monitor with 2.5” LCD Screen
Thank you for purchasing this Xvision product. Before operating this product, please read this instruction manual carefully.
4. Identify Parts
1. Product Description
1
The XTM010 is a handy, lightweight & portable CCTV Monitor. It can also be used as a Test Monitor to view cameras positions before they are fixed during installation.
2. Features
3. Contents
AV Connection Lead
8
9
5
2
6
3
zz Lightweight and totally portable Mini CCTV Monitor with 2.5” LCD screen for high quality 480x234 resolution images. zz The unit can also be used as a Test Monitor during installations to view camera positions before fixing cameras permanently. zz Supplied with a Li-ion High capacity rechargeable battery for up to 5 hours of continuous use (up to 15 days in standby mode). zz 5V DC Mains Power adaptor supplied to recharged the battery via the unit itself. zz Colour and brightness controls for manual adjustment of picture. zz Can be desk mounted using the removable bracket or for portable viewing during installation, the unit can be worn on your wrist or belt using the adjustable strap.
XTM010 Mini CCTV Monitor
5. Operating Instructions continued
7
4 XTM010 Front
1. 2. 3. 4. 5.
2.5” LCD Screen AV Input terminal 5V DC Input LED Indicator Brightness Control
XTM010 Rear
6. Colour Control 7. Power ON/OFF Switch 8. Strap holder 9. Panel for Battery Slot 10. Hole for bracket (both sides)
Bracket
Adjustable Wrist/ Belt Strap
Rechargeable Battery
6. Mounting Options DESK MOUNTING Insert the bracket into the side holes as shown below.
5. Operating Instructions CHARGING THE BATTERY 1. When using for the first or after a long time, insert the battery into the slot located on the rear of the camera. 2. Charge the battery fully using the power adaptor supplied (The LED Indicator will light up RED). 3. When fully charged, turn the unit ON. The LED will light up GREEN indicating it is ready to use.
5V DC Power Adaptor
USING THE UNIT AS A TEST MONITOR Once you have sited your camera, connect the Video Output to the Monitor using the AV connection lead. This will allow you to view the images on screen, test the camera, position it and focus it (please note small LCD screens are not designed for providing optimum focus of Analogue CCTV cameras, please recheck the focus of your cameras using a larger or CRT monitor).
CONNECTING THE MONITOR TO A CAMERA, DVR (or other video imaging device) 4. Connect your Camera/DVR to the AV input terminal, on the side of the unit, using the AV connection lead. 5. Turn the unit ON (The LED Indicator will light up GREEN). 6. You will then be able to view the image from your Camera/DVR on the screen and make any adjustments that may be required using the Brightness and Colour controls.
ADJUSTABLE STRAP Insert the strap through the handles on the rear of the unit as shown below. The strap can used to fix the unit to your wrist or belt.
Velcro this side
Match Velco together to fix