Preview only show first 10 pages with watermark. For full document please download

Cd-011087 Data Sheet

   EMBED


Share

Transcript

V3 SIP Strobe The IP Endpoint Company Now supporting voice mailbox Message Waiting Indication When installed, the wall-mounted V3 SIP Strobe operates as a visual alerting device. The device can be set up as part of a ring group (call group) with the Strobe engaged as notification of incoming calls. The V3 SIP Strobe may also be activated by being part of a Multicast group. When audio is detected on a specific Multicast address and port, the strobe will activate. Through a web page setup, you can have the SIP Strobe respond to message waiting signals by blinking. When the message has been heard, the strobe stops blinking. Specifications Users may also use CyberData's HTTP command set Ethernet I/F 10/100 Mbps Protocol SIP RFC 3261 Compatible Power Input PoE 802.3af compliant or +12 to 24 VDC at 1000 mA (500 mA minimum) Light power 90 candela (5-Watt LEDs)  Program or listen to up to 10 multicast addresses Flash rate 2 per second  SIP activation LED MTBF 100,000 Hours Operating Temperature -30 to 55 C (-22 to 131 F) Regulatory Compliance FCC Class A, UL 60950 Dimensions 5” x 5” x 1.5” (H x W x D)  Tamper sensor Warranty 2 years limited  Web-based setup Part Number 011087 to directly access the strobe’s functions. Features  Meets ADA requirements for telephony signaling and notification  Mailbox Message Waiting Indication  Multicast activation  Cisco SRST support  Event-controlled relay  PoE-powered Use areas include:  Sales and support mailbox indication  Classrooms  Banks or financial institutions  Court rooms  Manufacturing warehouses  Office  Indoor only The IP Endpoint Company CyberData Corporation  3 Justin Court, Monterey, CA 93940  831.373.2601  Fax: 831.373.4193  www.cyberdata.net V3 SIP Strobe Typical Installation Generic PoE Switch 1 SIP Strobe SIP Strobe 2 3 4 5 SIP Strobe 6 IP Phone IP PBX Server Mounting Options Pre Drill Holes on Wall 121001A Screw Accessory Kit Wall Cutout Opening Network Cable to J1 Backplate Wall Cutout Backplate accept Single Gang Box or Two Gang Box Cable Entry Slot Opening Wall Cutout Backplate Gang Box Mounting Screw (4x) Single Gang Box use two CyberData Corporation  3 Justin Court, Monterey, CA 93940  831.373.2601  Fax: 831.373.4193  www.cyberdata.net 930444D/130402