Transcript
CD 105.65/N220 8Ω 2,5” | 160 W AlFW TD CDR
Compression Driver
Code Z009497
2,5” voice coil Kapton former and Aluminium Flat Wire Titanium diaphragm Neodymium Magnet Circuit with Copper Demodulating Ring 1,4" horn throath diameter 108.8 dB sensitivity
+120
500
+115 +110
200
+105 100 +100 d B
S P
+95
50
+90 +85
L
20 +80 10
+75 +70
5 +65 3 +60 200
General Specifications Nominal Diameter Nominal Impedance Rated Power AES (1) (1500 – 20000 Hz) Continuous Program Power (2) Sensitivity @ 1W/1m (3) Voice Coil Diameter
500
65 mm (2,5")
Constructive Characteristics Magnet
3.0 mm
Voice Coil Former Material
1.93 T 6.0 Ω 0.65 kHz
Titanium No
Spare Part Code
Mounting Information
Net Weight
1.3 kg
Overall Diameter
1.2 kHz
Kapton
Ferrofluid in Air Gap
220 g
35.5 mm / 1.4 in
Neodymium Aluminium Flat Wire
Diaphragm
Magnet Weight
Throat Diameter
20k
160 W 108.8 dB
3.0 mm
Recommended Crossover Frequency
10k
8Ω
Magnetic Gap Depth
Resonance Frequency
5k
80 W
Voice Coil Winding Depth
DC Resistance
2k Hz
Free Air Frequency Response with 6x8,5 inches horn @ 1W, 1m Impedance (without horn)
105 mm
Voice Coil Winding Material
Flux Density
1k
Mounting Holes
Z009399
105 mm 4 holes ø6,5 on ø102 mm
Total Depth
88.7 mm
(1) Rated Power measured with 2-hour test with pink noise signal, 6dB crest factor, driver coupled to the recommended horn. (2) Power on Continuous Program is defined as 3dB greater than the Rated Power. (3) Measured at 1W,1m in axis within the frequency range, driver coupled to the recommended horn
SICA Altoparlanti s.r.l. - ITALY – website: www.sica.it - E-mail:
[email protected] - Tel. +39-071-7958072 - Fax +39-071-7959006
15/03/2017
