Transcript
CDK1037A 2-port RS-232 & Cash Drawer interface Universal PCI Serial Board
Introduction A cash drawer is generally a compartment underneath a cash register in which the cash from transactions is kept. When a transaction that involves cash is completed, the register sends an electrical impulse to a solenoid to release the catch and open the drawer.
Recently, due to heavier computing demands and the falling price of computer-like architectures, Point of sale (POS) systems have moved away from custom hardware architectures adopting of a personal computer and use common personal computer operating systems. The crux of a problem is that standard PC does not equip any cash drawer interface. Supplier needs using a particular thermal printer with additional cash drawer IO connectivity. From now on, SUNIX provides cost-efficient solutions to expand cash drawer interface to drive the cash drawer by installing standard PCI add-on card.
SUNIX CDK1037A, Universal PCI serial communication board, allows users to expand two standard RS-232 DB9M ports and one Cash Drawer 6-pin RJ-11/12 socket on PC-based system. The board is compatible with both 64 / 32-bit PCI architecture supporting 3.3 and 5V Bus, allowing it to be installed in virtually any PC-based systems. This card has 128-bytes onboard FIFO buffer and compatible with 16C950 UART specification. For the cash drawer interface, user can operate both +12 and +24 Voltage cash drawers by implemented SUNIX Windows based API (Application Programming Interface). Both RS-232 and Cash Drawer interface are designed with SUNIX UART controller, SUN1989 and as well built with many of SUNIX advanced features and technologies, making it the best solution for commercial retail automation applications.
E-mail:
[email protected]
Ver1.0 Jul. 2011 Copyright 2007 by SUNIX Group all right reserved
Features Expands two independent RS-232 serial ports with communication speeds up to 115.2Kbps. Expands single 6-pin RJ11/12 Type Cash Drawer interface to drive +12 / 24VDC Cash Drawer. High speed SUN1989 16C950 compatible UART controller on-board. Compliance with PCI 33MHz Ver. 3.0/2.3/2.2./2.1 specification. Supports both 64-bit & 32-bit PCI bus slot and 3.3V & 5V power. On-chip hardware auto flow control to guarantee no data loss. Built-in ± 2KV ESD protection for all serial signals. Plug-n-Play, I/O address and IRQ assigned by BIOS. SUNIX Windows based APIs for user easily implement Cash Drawer operation. Certified by CE, FCC, RoHS, and Microsoft WHQL approval. Support Microsoft Windows, Linux, and DOS.
Application
E-mail:
[email protected]
Ver1.0 Jul. 2011 Copyright 2007 by SUNIX Group all right reserved
Specifications Serial Communication
Interface
RS-232
Signal
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND, RI
Baud rate
50bps ~115.2Kbps
Stop bit
1, 1.5, 2
Parity
even, odd, none, mark, space
Flow Control PCB Connector
None, Xon/Xoff, RTS/CTS
No. of Port
SUNIX SUN1989 (16C950 UART Compatible) Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1 2-port
IRQ & IO
Assigned by System
FIFO
128byte Hardware
Protection
±2KV ESD protection for each signal Human Body Model (HBM)
Controller BUS
DB9 Male
Cash Drawer Communication
Interface
RJ11/12 (6-pin) EPSON Printer Compatible
Output
+12VDC
Driver Support
Microsoft Client
XP/Vista/7(X86/X64)
Microsoft Server
2000/2003/2008(X86/X64)
Microsoft Embedded
XP Embedded / POS Ready 2009/ Embedded System 2009
Note : “ Linux and DOS “ Supported by special inquiry.
Regulatory Approvals Hardware Software
EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, FCC Part 15 Class B, BSMI: CNS13438, C-Tick: CISPR22 AS/NZS, RoHS Microsoft WHQL Windows Microsoft Client: XP/Vista/7 (X86/X64) Microsoft Server: 2000/2003/2008 (X86/X64)
Environment Operation Temperature
0 to 60°C (32 to 140°F)
Operation Humidity
5 to 95% RH
Storage Temperature
-20 to 85°C (-4 to 185°F)
Dimension PCB Dimension
120 x 91 mm
Bracket
Standard 121 mm
Bracket Space
1
E-mail:
[email protected]
Ver1.0 Jul. 2011 Copyright 2007 by SUNIX Group all right reserved
Mechanical Drawings (Unit = mm)
Pin Assignment DB9 Male 1 2 3 4 5 6 7 8
Definition DCD RxD TxD DTR GND DSR RTS CTS
9
RI
RJ-11 / 12 1 2 3 4 5 6
Definition GND (Ground) L- (Solenoid drive - ) SW+ (Status sensing, signal) L+ (+12VDC Output) N/C (No connect) SW- (Status sensing, ground side)
Packing List Packing Content CDK1037A – 2-port RS-232 & Cash Drawer interface Universal PCI Serial Board Quick Installation Guide Software CD ROM
E-mail:
[email protected]
Ver1.0 Jul. 2011 Copyright 2007 by SUNIX Group all right reserved
