Transcript
SUPER AD-50 Parts Manual 24 VAC 1994 thru 2001 MODELS: ADG-50DS ADE-50S ADS-50S
American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail:
[email protected] www.adclaundry.com
ADC Part No. 450302-6
Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included with the dryer. The following “FOR YOUR SAFETY” caution must be posted near the dryer in a prominent location.
FOR YOUR SAFETY
POUR VOTRE SÉCURITÉ
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Ne pas entreposer ni utiliser d’essence ni d’autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil.
We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models.
Important For your convenience, log the following information: DATE OF PURCHASE ___________________________________________ RESELLER’S NAME Serial Number(s)
MODEL NO.
SUPER AD-50
__________________________
______________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________ ________________________________________________________________________________________
Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) 678-9447 or telephone your order directly to the ADC Parts Department at (508) 678-9000. Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.
“IMPORTANT NOTE TO PURCHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.
Table of Contents Control Door Assembly Without Trim For Non-Coin Models Mfd. as of July 13, 1998 ............................................................................... 3 High Security Control Door Assembly For All Coin Models and Non-Coin Models Mfd. prior to July 13, 1998 ........................................... 4 Phase 5 Coin Microprocessor Control Panel Assembly ........................................................................... 5 Phase 5 Non-Coin Microprocessor Control Panel Assembly ................................................................... 6 Phase 5 Coin and Non-Coin Microprocessor Control Box Assembly ...................................................... 7 Dual Timer “Tap Touch” Controls For Models Mfd. as of November 3, 2000 ....................................................................................... 8 Dual Timer Control Panel Assembly For Models Mfd. prior to November 3, 2000 ................................................................................... 9 Dual Timer Control Box Assembly ........................................................................................................ 10 Non-Microprocessor Coin Meter Control Panel Assembly .................................................................... 11 Non-Microprocessor Coin Meter Control Box Assembly ...................................................................... 12 Coin Meter Replacement Parts ............................................................................................................. 13 Coin Vault Assembly ............................................................................................................................. 14 “Plastic” Main Door Assembly .............................................................................................................. 15 Main Door Switch Assembly For “Plastic” Door ................................................................................... 16 Front Panel Assembly For “Plastic” Door .............................................................................................. 17 Main Door “Steel” Assembly ................................................................................................................ 18 Main Door Switch Assembly Cold Rolled Steel Door ............................................................................ 19 Cold Rolled Steel Door Front Panel ...................................................................................................... 20 Lint Trap Assembly ............................................................................................................................... 21 Drop Lint Door Assembly Without Trim For Non-Coin Models Mfd. as of July 13, 1998 ............................................................................. 22 Drop Lint Door Assembly With Trim For All Coin Models and Non-Coin Models Mfd. prior to July 13, 1998 ......................................... 23
Tumbler / Support Assemblies ............................................................................................................... 24 Idler Bearing Assembly ......................................................................................................................... 25 Tumbler Bearing Assembly .............................................................................................................. 26, 27 Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly............................................ 28, 29 Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly .................................................... 30, 31 Sensor Bracket Assemblies ............................................................................................................. 32, 33 Direct Spark Ignition Burner Assembly ............................................................................................ 34, 35 Electric Oven Assembly .................................................................................................................. 36, 37 Steam Coil / Air Operated Steam Damper Assembly ....................................................................... 38, 39 Sail Switch / Hi-Limit Assembly ............................................................................................................ 40 Single-Phase (1Ø) Motor, Electric Relay Panel Assembly ...................................................................... 41 3-Phase (3Ø) Motor, Electric Relay Panel Assembly ............................................................................. 42 Microprocessor Reversing Rear Control Box Assembly......................................................................... 43 Dual Timer Reversing Rear Control Box Assembly ................................................................................ 44 Outer Top / Back Guard Assemblies ..................................................................................................... 45 Electric Oven Chart .............................................................................................................................. 46 Transformer Listing Gas / Steam Dryers ................................................................................................ 47 Transformer Usage Listing For Electric Dryers ....................................................................................... 48 Microprocessor Coin Acceptors Listing ................................................................................................ 49 Additional Parts Available ..................................................................................................................... 50
Control Door Assembly Without Trim For Non-Coin Models Mfd. as of July 13, 1998
Illus. No.
Part No.
Qty.
1 2
881053 870011 882265*
1 1 1
3 4 5 6 7 8
117604 150300 102603 102601 102502 882541
4 4 1 1 1 2
*
Description ADC Logo Only (with double adhesive tape) Logo Double Tape Kit Control Door (includes illus. nos. 2 and 3) Neoprene Sponge Tape (sold by the foot) #10 x 1/2” Hex Washer TEK Screw Control Door Rod Support Catch Control Door Retainer Clip Control Door Support Rod Spring Turn Latch Assembly
Specify color when ordering.
450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
3
High Security Control Door Assembly For ALL Coin Models and Non-Coin Models Mfd. prior to July 13, 1998
Illus. No. 1 2 3 4*
5 6 7 8 9 10 11 * 4
Part No.
Qty.
160015 160104 160017 160032 881053 112350 870011 800022
1 1 1 1 1 1 1 1
800141
1
180201 117603 150201 150300 102603 102601 102502
1 3 5 4 1 1 1
Description High Security MK-100 Lock Assembly with Key (for coin models Only) MK-100 Key Only Special Dummy Lock Only (for non-coin models Only) Lock Cam Only ADC Logo with Tape Kit ADC Logo Only Double Sided Tape Kit High Security Control Door Assembly Less Lock (includes illus. nos. 4 through 7) High Security Stainless Steel Control Door Assembly Less Lock (includes illus. nos. 4 through 7) Top Trim with Lock Hole Suppressor Tape / Gasket (sold by the foot) #10-32 x 1/4” Phillips Round Head Machine Screw #10 x 1/2” Hex Washer TEK Screw Control Door Support Rod Catch Control Door Rod Retainer Clip Control Door Support Rod
Specify color when ordering. American Dryer Corporation
450302-6
Phase 5 Coin Microprocessor Control Panel Assembly
Illus. No. 1 2
3 4 5 6 7 8 9 10
11 *
Part No.
Qty.
112526 801213
1 1
801229
1
801259 801258 150309 137213 824998 153010 150005 ---------
1 1 1 1 1 2 2 1
137056 881143 137023 137021 880772 824080 122800 136048
1* 1* 1* 3* 1 1 1 1
Description Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4 through 6 and 11) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4 through 6 and 11) Coin Control Panel Only Coin Control Panel with Battery Bracket #10-16 x 1/2” Hex Head TEK Crimptite Screw Phase 5 Coin Controller Only Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4” Phillips Round Head Machine Screw Microprocessor Coin Acceptor with Optical Switch (refer to Microprocessor Coin Acceptors Listing on page 49) Optic Switch Only (Greenwald coin acceptors) Optic Switch Only (Hanke coin acceptors) Optic Switch Connector Only Microprocessor Socket Only Single Coin Optical Switch Harness Dual Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool 1/8-Amp (Slo-Blo) Fuse
For dual coin models, double the quantity.
IMPORTANT: Check label on computer chip to verify correct part number for controller. 450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
5
Phase 5 Non-Coin Microprocessor Control Panel Assembly
Illus. No. 1
2
3 4 5 6 7
Part No.
Qty.
112535 112276 112275
1 1 1
112277
1
112278
1
801255 801256 801206
1 1 1
801207
1
137222 137231 824998 153010 150005 150309 136048
1 1 1 2 2 1 1
Description Non-Coin English Keyboard Label Assembly Non-Coin Stick-On Labels (English Only)...Not Illustrated 3-Language Non-Coin Stick-On Labels...Not Illustrated (Spanish, Italian, and Hebrew) 3-Language Non-Coin Stick-On Labels...Not Illustrated (English, Spanish, and Hebrew) 5-Language Non-Coin Stick-On Labels...Not Illustrated (Italian, Dutch, French, German, and Chinese) Phase 5 Microprocessor Control Panel Only Phase 5 Microprocessor Control Panel Only with Battery Bracket Phase 5 Non-Coin Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 7) Phase 5 Non-Coin Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 7) Phase 5 Non-Coin Non-Reversing Controller Only Phase 5 Non-Coin Reversing Controller Only Phase 5 Battery Clip #6 Star Washer #6-32 x 3/4” Phillips Round Head Machine Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw 1/8-Amp (Slo-Blo) Fuse
IMPORTANT: Check label on computer chip to verify correct part number for controller. 6
American Dryer Corporation
450302-6
Phase 5 Coin and Non-Coin Microprocessor Control Box Assembly
Illus. No. 1
2 3 4 5 6 7 8 9 10 *
Part No.
Qty.
141403
1
132070
1
150300 120715 150002 151000 136057 150301 136008 122641 122706
2 1 2 2 * * * 1 *
Description 24 VAC Transformer For ALL Gas and Steam Models, and Electric Models of 380/416/480 Volt 24 VAC Transformer (for electric models of 208 volt/240 volt) #10 x 1/2” Hex Washer TEK Screw 30-Position Terminal Block #6-32 x 1” Phillips Round Head Machine Screw #6-32 Pal Nut 1/2-Amp (Slo-Blo) Fuse #8-18 x 7/16” Phillips Pan Head TEK Screw Fuse Block/Strip Only 15-Pin Microprocessor Connector Socket
As required.
450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
7
Dual Timer “Tap Touch” Controls For Models Mfd. as of November 3, 2000
Illus. No.
8
Part No.
Qty.
1 2 3 4 5 6 7 8
124030 124025 824175 122301 131932 120730 151000 882903
1 1 1 1 3 1 6 1
9 10 11 12 13 14 15
850392 153010 152000 150207 150110 112563 124104 124105
2 3 2 4 1 1 1
Description 15 Minute Timer – 24 VAC 60 Minute Timer – 24 VAC Red Pilot Light – 24 VAC “Tap Touch” Switch Relay SPST 24v 30-Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel Only #6 Star Washer #6-32 Hex Nut #10-24 x 1/2” Phillips Pan Head Machine Screw #8-32 x 1/4” Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer American Dryer Corporation
450302-6
Dual Timer Control Panel Assembly For Models Mfd. prior to November 3, 2000
Illus. No.
Part No.
Qty.
1 2 3
123005 122400 824015
1 1 1
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 --
800051 131917 150207 154001 152000 153010 120713 150002 150110 150001 131931 151000 112050 150309 124103 124025 124030 122602 122700 122801
1 1 2 2 2 2 1 2 4 2 1 2 1 1 2 1 1 1 8 1
450302-6
Description Red Indicator Light – 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete – 24 VAC (includes illus. nos. 1 through 21) Dual Timer Control Panel Only Push-to-Start Relay – 24 VAC #10-24 x 1/2” Round Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer 18-Position Terminal Block #6-32 x 1” Round Head Machine Screw #8-32 x 1/4” Phillips Machine Screw #6-32 x 1/2” Round Head Machine Screw Dual Timer Relay – 24 VAC #6-32 Pal Nut Dual Timer Label Only #10-16 x 1/2” Hex Head TEK Crimptite Screw Arrow Timer – 24 VAC 60 Minute Timer – 24 VAC 15 Minute Timer – 24 VAC 9-Pin Connector Only Pin Terminal Only Pin / Socket Extraction Tool Telephone: (508) 678-9000 / www.adclaundry.com
9
Dual Timer Control Box Assembly
Illus. No. 1 2 3 4 5 6
7 8** 9 10 11 12
Part No.
Qty.
122603 122701 122801 315010 150300 150300 141403
1 9 1 1 2 2 1
132070
1
136008 136057 150301 150002 120715 151000
* * * 2 1 2
Description 9-Pin Socket Connector Socket Terminal Only Pin / Socket Extraction Tool 9-Pin Connector Bracket #10 x 1/2” Hex Washer TEK Screw #10 x 1/2” Hex Washer TEK Screw 24 VAC Transformer (for ALL gas and steam models, and electric models of 380/416/480 volt) 24 VAC Transformer (for electric models of 208 volt/240 volt) Fuse Block/Strip Only 1/2-Amp (Slo-Blo) Fuse #8 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut
* As required. ** Check fusing on dryer for verification. 10
American Dryer Corporation
450302-6
Non-Microprocessor Coin Meter Control Panel Assembly
Illus. No.
*
Part No.
Qty.
1 2 3
123005 122400 824020
1 1 1
4 5 6 7* 8 9 10 11 12 --
800054 131917 150207 154001 125601 150303 120712 150309 122602 122700 122801
1 1 2 2 1 2 1 1 1 9 1
Description Red Indicator Light – 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Complete – 24 VAC (includes illus. nos. 1 through 6 and 8 through 12) Coin Meter Control Panel Only Push-to-Start Relay – 24 VAC #10-24 x 1/2” Round Head Machine Screw #10-24 Speed Nut 25¢ Coin Meter 24v (specify timing) #4 x 3/4” Pan Head “A” Screw 12-Position Terminal Block #10-16 x 1/2” Hex Head TEK Crimptite Screw 9-Pin Connector Only Pin Terminal Only Pin / Socket Extraction Tool
Consult factory for coin meters not listed.
450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
11
Non-Microprocessor Coin Meter Control Box Assembly
Illus. No. 1 2 3 4 5 6
7 8** 9 10 11 12
Part No.
Qty.
122603 122701 122801 315010 150300 150300 141403
1 9 1 1 2 2 1
132070
1
136008 136057 150301 150002 120715 151000
* * * 2 1 2
Description 9-Pin Socket Connector Socket Terminal Only Pin / Socket Extraction Tool 9-Pin Connector Bracket #10 x 1/2” Hex Washer TEK Screw #10 x 1/2” Hex Washer TEK Screw 24 VAC Transformer (for ALL gas and steam models, and electric models of 380/416/480 volt) 24 VAC Transformer (for electric models of 208/240 volt) Fuse Block/Strip Only 1/2-Amp (Slo-Blo) Fuse #8 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1” Phillips Round Head Machine Screw 30-Position Terminal Block #6-32 Pal Nut
* As required. ** Check fusing on dryer for verification. 12
American Dryer Corporation
450302-6
Coin Meter Replacement Parts
Illus. No. 1 2
3 4 450302-6
Part No. 125541 125540 125500 125501 125502 125503 125504 125506 125507 125508 125510 125515 125516
Qty. 1 1 1 1 1 1 1 1 1 1 1 1 2
Description 1/60 RPM 24v / 60 Hz Meter Motor 1/30 RPM 24v / 50 Hz Meter Motor 2-Point Cam 3-Point Cam 4-Point Cam 5-Point Cam 6-Point Cam 8-Point Cam 9-Point Cam 10-Point Cam 12-Point Cam Meter Switch “B” with Arm Meter Switch “A” or “C” Telephone: (508) 678-9000 / www.adclaundry.com
13
Coin Vault Assembly
Illus. No. 1
14
Qty.
802112
1
802117 802110
1 1
4
802115 160006 875061 160105* 802020
1 1 1 1 1
5
802019 125915 802018
1 1 1
6 7 8 9
152014 102502 102601 102603
4 1 1 1
2 3
*
Part No.
Description Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Microprocessor Coin Vault Only Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Non-Microprocessor Coin Vault Only Cam For 1/4 Turn Lock Only 1/4 Turn Lock with Key and Cam 1/4 Turn Mer-Pel Key Only 1/4 Turn Coin Box Assembly (includes illus. nos. 2 through 5) 1/4 Turn Coin Box Only without Face Plate High Security (Greenwald) Coin Box Only with Key 1/4 Turn Coin Box Face Plate Assembly (includes illus. nos. 2 through 5) 1/4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch
Specify key number when ordering. American Dryer Corporation
450302-6
“Plastic” Main Door Assembly
Illus. No.
Part No.
Qty.
1
881421
1
2 3 4 5 6
800448 150410 152014 102349 102212 170730 150448 170319 150431
4 4 1 1 1 1 4 4 1
7 8 9 450302-6
Description Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) 12-1/2” Stainless Steel Main Door Hinge Assembly #10-24 x 3/8” Phillips Pan Head Taptite Screw 1/4-20 Free Spin Wash Nut Main Door Gasket 20-7/16” Door Glass with Four (4) Holes Main Door Glass Adhesive (10.3 oz. cartridge) 1/2” Stainless Steel Flat Head Allen Screw Door Glass (Nylon) Spacer Main Door Latch Screw (#10 x 7/16” dome hex head) Telephone: (508) 678-9000 / www.adclaundry.com
15
Main Door Switch Assembly For “Plastic” Door
Illus. No.
16
Part No.
Qty.
1 2 3 4 5 6
152013 153008 137005 121028 154281 800448
2 2 1 2 2 1
7 8 9 10
153565 313218 150201 121405
2 1 2 1
Description #6-32 Hex Nut #6 Lock Washer Single-Pole Door Switch Insulated Female Terminal 3/8” Standard Nylon Spacers 12-1/2” Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6 Stud Main Door Switch Housing Only #10-32 x 1/4” Phillips Pan Head Screw Rubber Grommet American Dryer Corporation
450302-6
Front Panel Assembly For “Plastic” Door
Illus. No.
Part No.
Qty.
1
875301*
1
875312
1
154215 170330 150309 150313
2 1 9 9
150318 121405
1
2 3 4
5 *
Description Insulated Front Panel Assembly Complete – Latch Type (includes illus. nos. 1 through 3 and 5) Stainless Steel Right-Hand Insulated Front Panel Assembly Complete – Latch Type (includes illus. nos. 1 through 3 and 5) 1/8” Pop Rivet Friction Door Latch #10-16 x 1/2” Hex Head TEK Crimptite Screw #10-16 x 1/2” TORX® Plus Type 1 Screw (for models mfd. as of November 2, 2000) TORX® Plus Bit Rubber Grommet
Specify color when ordering.
450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
17
Main Door “Steel” Assembly
Illus. No.
Qty.
1
881150
1
2 3
102354 170730 170731 881152
1 1 1 1
4 5 6
150445 153031 881151
2 1 1
7
150445 150443 150683 152014 151010 150120 150683 152014 881210 102218 102360
2 2 3 3 1 1 3 3 1 1 1
170731
1
151013
4
8 9 10 11 12 13 14 15
16 18
Part No.
Description Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Clear Glass Adhesive (10.3 oz. cartridge) Black Glass Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4” Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5 through 7) 1/4-20 x 3/4” Black Cap Head Setscrew 1/4-20 x 3/4” Stainless Steel Cap Head Setscrew 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw 1/4-20 x 5/8” Black Carriage Bolt 1/4-20 Free Spin Wash Nut Black Main Door Handle Only 20-7/16” Door Glass Glass/Door Gasket Tape (for models mfd. as of February 9, 2001) Black Glass Adhesive (10.3 oz. cartridge) For Models Mfd. prior to February 9, 2001 #10-32 Black Nylon Acorn Nut American Dryer Corporation
450302-6
Main Door Switch Assembly Cold Rolled Steel Door
Illus. No. 1 2 3 4 5 6 7 450302-6
Part No. 153566 152013 153010 137005 122636 881211 150301
Qty. 2 2 2 1 2 1 2
Description #6-32 x 7/8” Clinch Stud #6-32 Hex Nut 1/4” ATF Zinc Plated #6 Star Washer Single-Pole Door Switch Flag Terminal Main Door Switch Housing #8-18 x 7/16” Phillips Pan Head TEK Screw Telephone: (508) 678-9000 / www.adclaundry.com
19
Cold Rolled Steel Door Front Panel
Illus. No.
Part No.
Qty.
1
881270*
1
881288
1
881996*
1
154215 170330 150300 150309 881152 881208 150445 150443 881151 881209
2 1 1 8 1 1 4 4 1 1
2 3 4 5 6 7 8 * 20
Description Right-Hand Front Panel Assembly (cold rolled steel door) (includes illus. nos. 1 through 3) Stainless Steel Front Panel Assembly (cold rolled steel door) (includes illus. nos. 1 through 3) Left-Hand Front Panel Assembly (cold rolled steel door) (includes illus. nos. 1 through 3) 1/8” Pop Rivet Friction Door Latch #10-16 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Phillips Hex Head TEK Crimptite Screw Black Top Hinge Block Assembly Stainless Steel Top Hinge Block Assembly 1/4-20 x 7/8” Black Cap Head Setscrew 1/4-20 x 7/8” Stainless Steel Cap Head Setscrew Black Bottom Hinge Block Assembly Stainless Steel Bottom Hinge Assembly
Specify color when ordering. American Dryer Corporation
450302-6
Lint Trap Assembly
Illus. No.
Part No.
Qty.
1
881064
1
2 3 4 5 6 7 --
881063 154200 150300 304100 800506 150419 108120 150418
1 7 3 1 1 2 1 1
450302-6
Description Lint Trap Assembly Complete (includes illus. nos. 1 and 3 through 5) Lint Trap Only 5/32” Pop Rivet #10 x 1/2” Hex Washer TEK Screw Lint Screen Hold Down Lint Screen Only #6 x 1/2” Tamperproof TEK Screw Chain For Drop Lint Door Tamperproof Screw Hand Driver Telephone: (508) 678-9000 / www.adclaundry.com
21
Drop Lint Door Assembly Without Trim For Non-Coin Models Mfd. as of July 13, 1998
Illus. No. 1
* 22
Part No.
Qty.
160001 160103 800150
1 1 1
2
160003 160104 160008 160009 150425
1 1 1 1 1
3 4
157000 882264*
1 1
5 6 7 8 -
150201 117604 150419 108120 150418
6 7 2 1 1
Description AD-100 Lock Assembly with Key (for coin models Only) AD-100 Key Only Knob Latch Kit Assembly (includes illus. nos. 1 and 2) Dummy Lock Only (for non-coin models) MK-100 Key Only (for dummy lock) Lock Cam For AD-100 and Dummy Lock Knob Latch Adjustable Cam Only #12-24 x 3/8” Round Head Machine Screw Only (screw for knob latch adjustable cam) Drop Lint Door Spring Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) #10-32 x 1/4” Phillips Pan Head TEK Screw Neoprene Sponge Tape (sold by the foot) #6 x 1/2” Tamperproof TEK Screw Chain For Drop Lint Door (10-1/2” length) Tamperproof Screw Hand Driver
Specify color when ordering. American Dryer Corporation
450302-6
Drop Lint Door Assembly With Trim For ALL Coin Models and Non-Coin Models Mfd. prior to July 13, 1998
Illus. No. 1
2
3 4
5 6 7 8 9 10 *
Part No.
Qty.
160001 160103 800150
1 1 1
160200 160003 160104 160008 160009 150425
1 1 1 1 1 1
157000 800219*
1 1
800232*
1
800243 150201 117600 117603 180211 150419 150418 108120
1 10 7 3 2 2 1 1
Description AD-100 Lock Assembly with Key AD-100 Key Only Knob Latch Kit Assembly (for non-coin models) (includes illus. nos. 1 and 2) Knob Latch Kit with Two (2) Screws (for non-coin models) Dummy Lock Only (for non-coin models) MK-100 Key Only Lock Cam For AD-100 Lock Knob Latch Adjustable Cam (for non-coin models) #12-24 x 3/8” Round Head Machine Screw (for knob latch adjustable cam) Drop Lint Door Spring Drop Lint Door Assembly (includes illus. nos. 4 through 8) Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Drop Lint Door Assembly #10-32 x 1/4” Phillips Pan Head Machine Screw Noise Suppressor Tape (sold by the foot) Suppressor Tape / Gasket (sold by the foot) Trim / Kick Plate (31-1/8” length) #6 x 1/2” Tamperproof Screw Tamperproof Screw Hand Driver Chain For Drop Lint Door
Specify color when ordering.
450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
23
Tumbler / Support Assemblies
Illus. No.
Part No.
Qty.
1*
800838 800837**
1 1
800839**
1
150309 301302 301311 150500 100903 153004 800616 800614 152005 153005 153004 116001 401010
40 2 2 1 4 4 1 1 4 4 4 1 1
2 3 4 5 6 7 8 9 10 11 ---
Description Tumbler Only with Tapered Rib (without felt collar) Non-Reversing Tumbler and Support Assembly with Tapered Rib (includes illus. nos. 1 through 10) Reversing Tumbler and Support Assembly with Tapered Rib (includes illus. nos. 1 through 10) #10-16 x 1/2” Hex Head TEK Crimptite Screw Tumbler Rib Only (low rib) Tapered Tumbler Baffle Rib Only (high rib) 5/16-18 x 3/8” Socket Button Head Screw 5/16-18 x 38-1/2” Tie Rod 3/8” Flat Washer Non-Reversing Tumbler Support Only Reversing Tumbler Support Only 3/8-16 Hex Nut 3/8” Lock Washer 3/8” Flat Washer Felt Collar Only #847 Adhesive For Felt Collar (5.0 oz. tube)
* For stainless steel tumbler, contact the factory. ** Felt collar is not included and must be ordered separately. 24
American Dryer Corporation
450302-6
Idler Bearing Assembly
Illus. No. 1
Part No.
Qty.
100165
1
100106
1
101140 100166
1 1
100167
1
100109
1
4 5 6
154301 100705 882576
2 1 1
7 8 9 10 11 12
150617 153005 153004 801009 152004 150509
2 2 2 1 1 1
2 3
450302-6
Description 5L-610 V-Belt (idler to tumbler) For Non-Reversing Models Only 5L-690 V-Belt (idler to tumbler) For Reversing Models Only 14” x 3” Compound Pulley 4L-790 V-Belt (idler to motor) 60 Hz (for non-reversing models Only) 4L-800 V-Belt (idler to motor) 50 Hz (for non-reversing models Only) 4L-650 V-Belt (idler to motor) 50/60 Hz (for reversing models Only) 5/16-18 x 1” Allen Setscrew 3/16” x 3/16” x 1-3/8” Key Idler Bearing Assembly Complete (includes illus. nos. 5 through 12) 3/8-16 x 1” Hex Head Machine Bolt 3/8” Lock Washer 3/8” Flat Washer Idler Square Washer 5/16-18 Hex Nut 5/16-18 x 3” Hex Head Machine Bolt Telephone: (508) 678-9000 / www.adclaundry.com
25
Tumbler Bearing Assembly
26
American Dryer Corporation
450302-6
Tumbler Bearing Assembly
Illus. No. 1 2 3 4
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
450302-6
Part No.
Qty.
880220 153005 152005 882544
1 4 4 1
882545
1
882542 882543 880202 880779 150601 153004 153005 152005 154326 152004 150621 153002 150501 102120 401010 824807 100713 101100 100106 150610
1 1 1 1 2 8 2 2 2 4 2 4 4 1 1 1 1 1 1 2
Description 1-3/8” Flange Bearing Only 3/8” Lock Washer 3/8-16 Hex Nut Pillow Block Bearing Assembly Complete (includes illus. nos. 4 through 14 and 20) Bearing Assembly Complete with Rotational Sensor (includes illus. nos. 4 through 16 and 20) Bearing Support Only Bearing Support Only (with rotational sensor) 1-3/8” Pillow Block Bearing Only 1-3/8” Pillow Block Bearing Assembly (with rotational sensor) 3/8-16 x 2” Hex Bolt 3/8” Flat Washer 3/8” Lock Washer 3/8-16 Hex Nut 5/16-24 x 3/8” Setscrew (black) 5/16-18 Hex Nut 5/16-18 x 1-1/2” Tap Bolt 5/16” Lock Washer 5/16-18 x 3/4” Tap Bolt Sintered 8 Magnet #847 Construction Mastic Rotational Sensor Assembly 1/4” x 1/4” x 7/8” Key 18” Pulley 5L-690 V-Belt 5/16-18 x 1-1/2” Allen Setscrew
Telephone: (508) 678-9000 / www.adclaundry.com
27
Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly
Illus. No. 1 2 3 4 5 6 7
8 9 10 28
Part No.
Qty.
100166 100701 101130 101139 150501 153002 153001 100073
1 1 1 1 4 4 4 1
181016
1
122701 122801 137030 152004
8 1 1 4
Description 4L-790 V-Belt (to idler assembly) 50/60 Hz Only 3/16” x 3/16” x 1” Key 5/8” x 2-1/2” Motor Pulley (60 Hz motors Only) 5/8” x 2-3/4” Motor Pulley (50 Hz motors Only) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 hp 115-230v 1ø 60 Hz Non-Reversing Totally Enclosed, Fan-Cooled Motor (plug type) 3/4 hp 240v 1ø 50 Hz Non-Reversing Totally Enclosed, Fan-Cooled Motor (plug type) Socket Terminal Only Pin / Socket Extraction Tool 8-Pin Housing Connector 5/16-18 Hex Nut American Dryer Corporation
450302-6
Non-Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly
Illus. No. 11 12 13 14 15
16 17 18 19 20 21 22
*
Part No.
Qty.
153002 153001 117600 154000 800919
4 4 4 4 1
803903
1
881080
1
803904
1
803905*
1
881065*
1
153050 100603 100702 153050 152006 120200 100075
2 1 1 2 2 1 1
100076
1
Description 5/16” Lock Washer 5/16” Flat Washer Noise Suppressor Tape (sold by the foot) 5/16-18 Tinnerman Nut 1 hp Motor Mount Only (56Z frame) (includes illus. no. 13) 1 hp 115-230v 1ø 60 Hz Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) 3/4 hp 240v 1ø 60 Hz Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete (includes illus. nos. 2 through 7 and 13 through 20) For Models Mfd. as of February 21, 1995 3/4 hp 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) For Models Mfd. prior to February 21, 1995 1 hp 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1 hp 208/230/380/460v 3ø 50 Hz Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete (includes illus. nos. 2 through 6 and 13 through 22) 1/2” S.A.E. Flat Washer 16” Impellor with 3/4” Bore 1/8” x 1/8” x 1-1/2” Key 1/2” S.A.E. Flat Washer 1/2-20 Left-Hand Jam Nut 3/8 x 90° Connector 1 hp 208/230/380 460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame) 3/4 hp 240v 1ø 50 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame) For Models Mfd. prior to February 21, 1995
Specify voltage when ordering.
450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
29
Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly
30
American Dryer Corporation
450302-6
Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly
Illus. No. 1 2 3
Qty.
4 5
100109 100701 101130 101139 120200 181003
1 1 1 1 1 1
6 7 8 9
150501 153002 153001 100075
4 4 4 1
10 11 12 13 14 15 16 17 18
120200 150501 153002 153001 154000 152004 153002 153001 800920
1 4 4 4 8 4 4 4 1
881067*
1
881066*
1
117600 153050 100702 100603 153050 152006
5 2 1 1 2 2
19 20 21 22 23 24 *
Part No.
Description 4L-650 V-Belt (to idler assembly) 3/16” x 3/16” x 1” Key 5/8” x 2-1/2” Motor Pulley (60 Hz) 5/8” x 2-3/4” Motor Pulley (50 Hz) 3/8” x 90° Connector 1/2 hp 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame) 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 1 hp 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame) 3/8” x 90° Connector 5/16-18 x 3/4” Hex Head Machine Bolt 5/16” Lock Washer 5/16” Flat Washer 5/16” Tinnerman 5/16-18 Hex Nut 5/16” Lock Washer 5/16” Flat Washer Reversing Motor Mount Only (56Z frame) (includes illus. no. 19) Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) For 60 Hz Models Only Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete (includes illus. nos. 2 through 14 and 18 through 24) For 50 Hz Models Only Noise Suppressor Tape (sold by the foot) 1/2” S.A.E. Flat Washer 1/8” x 1/8” x 1-1/2” Key 16” Impellor with 3/4” Bore 1/2” S.A.E. Flat Washer 1/2-20 Left-Hand Jam Nut
Specify voltage when ordering.
450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
31
Sensor Bracket Assemblies
32
American Dryer Corporation
450302-6
Sensor Bracket Assemblies
Illus. No.
Part No.
Qty.
1
880251
1
2
130103 130301 153010 152000 121028 122701 122605 154007 150005 801425
1 1 2 2 2 4 1 2 2 1
305007 122604 122700 150301 150005 130111 130100 130103 130301 130101 153010 152000 840065 121028 122701 122605 831702
1 1 4 2 5 1 1 1 1 1 5 5 1 8 4 1 1
801418
1
305007 122604 122700 122801 150301
1 1 4 1 2
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
26 27 28
450302-6
Description 1/4” Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) 225° Large Automatic Thermostat 225° Manual Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal Only Socket Terminal Only 4-Pin Socket Connector Only 1/4” Tinnerman Push On Fastener #6-32 x 1/4” Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket Only 4-Pin Connector Only Pin Terminal Only #8-18 x 7/16” Phillips Pan Head TEK Screw #6-32 x 1/4” Round Head Machine Screw 130° Large Thermostat 150° Large Thermostat 225° Large Automatic Reset Thermostat 225° Manual Reset Thermostat 180° Large Thermostat #6 Star Washer #6-32 Hex Nut Sensor Jumper (4) Insulated Terminal Only Socket Terminal Only 4-Pin Socket Connector Only Sensor (4) Bracket Harness Assembly (includes illus. nos. 22 through 24) Non-Computer Sensor (4) Bracket Assembly Complete (includes thermostats) (includes illus. nos. 14 through 25) Universal Sensor Bracket Only 4-Pin Connector Only Pin Terminal Only Pin / Socket Extraction Tool #8-18 x 7/16” Phillips Pan Head TEK Screw
Telephone: (508) 678-9000 / www.adclaundry.com
33
Direct Spark Ignition Burner Assembly
34
American Dryer Corporation
450302-6
Direct Spark Ignition Burner Assembly
Illus. No.
Part No.
Qty.
1 2 3 4
318030 150300 150309 128915 880134
1 2 2 1 1
5 6 7 8 9 10*
15
880330 150103 153000 151001 141105 140856 140810 140821 140808 141232 318700 150300 128927 880960 140411 318712
1 3 3 3 3 3 3 3 3 1 2 4 1 1 1 1
16
150309
2
17 18 19 20
881367 142809 150299 128935
1 1 2 1
21 ---------
880815 850899 809627** 809628** 880984* 880985*
1 1 1 1 1 1
11 12 13 14
Description Direct Spark Ignition Burner Shield #10 x 1/2” Hex Washer TEK Screw #10-16 x 1/2” Hex Head TEK Crimptite Screw Direct Spark Ignition Ignitor / Flame Probe Assembly Ignitor / Flame Probe Kit Assembly (includes illus. nos. 4 and 5) High Voltage Wire and Connector Assembly #8-32 x 1/2” Pan Head Machine Screw #8 Steel Burr #8-32 Pal Nut Large Tube Burner #23 Natural Gas Burner Orifice (60 Hz Only) #42 Liquid Propane Gas Burner Orifice (60 Hz Only) #28 Natural Gas Burner Orifice (50 Hz Only) #44 Liquid Propane Gas Burner Orifice (50 Hz Only) 1/2” Direct Spark Ignition Manifold (3-Port) Pipe Bracket (bent) #10 x 1/2” Hex Washer TEK Screw 1/2” 24 VAC Redundant (natural gas) Gas Valve 1/2” 24 VAC Redundant (liquid propane gas) Gas Valve 1/2” Valve Conversion Kit (liquid propane gas) GV Pipe Bracket (for models mfd. as of August 10, 1995) #10-16 x 1/2” Phillips Round Head Crimptite (for models mfd. as of August 10, 1995) 1/2” Union Shut Off with Tail Piece 1/2” x 29-1/8” Pipe #10 x 1” Hex Washer TEK Screw Johnson Controls Direct Spark Ignition Module (blue) For Models Mfd. as of April 15, 2000 ADC Direct Spark Ignition Module Only (50/60 Hz) (white) Non-Heat Reclaimer Burner Box Only Natural Gas Burner Assembly Complete Less Orifices Liquid Propane Gas Burner Assembly Complete Less Orifices Super AD-50 Liquid Propane Conversion Kit (60 Hz models) Super AD-50 Liquid Propane Conversion Kit (50 Hz models)
* Consult factory for elevations over 2,000 feet. ** Orifices are not included and must be ordered separately.
450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
35
Electric Oven Assembly
36
American Dryer Corporation
450302-6
Electric Oven Assembly
Illus. No.
Part No.
1
803007* --------* --------* 150300 802800 802801
1 1 2 1 1
154004 150309 802799 122200 150303 105500 319202 154002 150300 803100 320611 150402 130400 150300 154001 121010 152014 --------* --------* 120081 120080 152008 121011* --------* 153009 320607 150402
1 2 1 1 2 1 1 1 2 1 1 2 1 2 1 1 3 1 1 1 2
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 *
Qty.
Description Large Electric Oven Box Only Electric Oven Assembly Complete Electric Element #10 x 1/2” Hex Washer TEK Screw Sail Switch Box with Cover and Bracket Only Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover Only Sail Switch #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener #10 x 1/2” Hex Washer TEK Screw Electric Oven Front Cover Only Large Relay Box Cover Only #10-24 x 5/8” Slotted Truss Head Machine Screw 290° Hi-Limit #10 x 1/2” Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug 1/4-20 Free Spin Wash Nut Oven Relay Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) Bus Bar (sold by the foot) Terminal Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover Only #10-24 x 5/8” Slotted Truss Head Machine Screw
Refer to Electric Oven Chart on page 46.
450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
37
Steam Coil / Air Operated Steam Damper Assembly
38
American Dryer Corporation
450302-6
Steam Coil / Air Operated Steam Damper Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7
165009 153002 152004 152002 153007 820321 803415
1 6 6 4 4 2 1
8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
153007 152002 115995 102350 151007 152007 100497 100492 152002 153007 100472 143110 100472 100496 143238 100498 150002 153010 152000 330987 152002 153007 100520
4 4 60 1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 2 1 2 2 1
450302-6
Description Steam Coil Assembly 5/16” Lock Washer 5/16-18 Hex Nut 1/4-20 Hex Nut 1/4” Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) 1/4” Lock Washer 1/4-20 Hex Nut Steam Damper Gasket (sold by the inch) 68-1/2” Long Steam Damper Foam Gasket 7/16-20 Stainless Steel Acorn Nut 7/16-20 Hex Nut 1-1/4” x 3” Stroke Piston Piston Support Bracket 1/4-20 Hex Nut 1/4” Lock Washer 1/4” Poly x 1/8” M.P.T. Connector 1/4” Poly Flo Tubing (sold by the foot) 1/4” Poly x 1/8” M.P.T. Connector 1/8” Needle Valve 1/8” Brass Close Nipple 3-Way Micro Valve 24 VAC #6-32 x 1” Machine Bolt #6 Star Washer #6-32 Hex Nut Micro Valve Support 1/4-20 Hex Nut 1/4” Lock Washer 1/8” N.P.T. Silencer (muffler)
Telephone: (508) 678-9000 / www.adclaundry.com
39
Sail Switch / Hi-Limit Assembly
Illus. No.
Qty.
1 2 3 4 5 6 7 8 9
154004 150309 802799 150303 122200 105500 319202 154002 802800 802801
1 2 1 2 1 1 1 1 1 1
10 11 12 13 14 15
142809 150309 319704 151000 151001 130403 130201 143000
1 2 1 2 2 1 1 1
16 40
Part No.
Description Twin Speed Nut #10-16 x 1/2” Hex Head TEK Crimptite Screw Sail Switch Box Cover and Bracket Only #4 x 3/4” Pan Head “A” Machine Screw Sail Switch Only Sail Switch Actuator Rod Sail Switch Damper (flat) 1/8” Push On Fastener Sail Switch Box with Cover and Bracket Only Sail Switch Assembly Complete (includes illus. nos. 1 through 8) 1/2” x 29-1/8” Pipe #10-16 x 1/2” Round Head Machine Screw Hi-Limit Mounting Bracket Only #6-32 Pal Nut #6-32 x 1/2” Round Head Machine Screw 330° Hi-Limit (automatic reset) 330° Hi-Limit (manual reset) 1/2” x 3/4” Reducing Coupling American Dryer Corporation
450302-6
Single-Phase (1Ø) Motor, Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3
132475 150299 824828
1 2 1
-
322809 150301
1 4
450302-6
Description 2-Pole Contactor 24 VAC #10 x 1” Hex Head Screw RC Network with Connectors (for microprocessor controlled models Only) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated Telephone: (508) 678-9000 / www.adclaundry.com
41
3-Phase (3Ø) Motor, Electric Relay Panel Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12 13
322812 132430 150103 151001 153002 152004 120701 150008 151000 121300 137015 150300 ---------
1 1 2 2 1 1 1 2 2 3 1 2 -
---
322809 150301
1 4
42
Description Back Electrical Box Component Plate Impellor Contactor (208/230/240v, 50/60 Hz) 24v Coil #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16-18 Lock Washer 5/16-18 Hex Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing RC Filter (for microprocessor controlled models Only) #10 x 1/2” Hex Washer TEK Screw Transformer (refer to Transformer Listings on page 47 and page 48) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated American Dryer Corporation
450302-6
Microprocessor Reversing Rear Control Box Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
322812 137060 137013 882386 150103 151001 153002 152004 132430 150103 151001 120701 150008 151000 121300 150300 ---------
1 1 4 1 2 2 1 1 1 2 2 1 2 2 3 2 -
---
322809 150301
1 4
450302-6
Description Back Electrical Box Component Plate Arc Suppressor Board Nylon Standoff Reversing Contactor (208/230/240v, 50/60 Hz) 24v Coil #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16-18 Lock Washer 5/16-18 Hex Nut Impellor Contactor (208/230/240v, 50/60 Hz) 24v Coil #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing #10 x 1/2” Hex Washer TEK Screw Transformer (refer to Transformer Listings on page 47 and page 48) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated Telephone: (508) 678-9000 / www.adclaundry.com
43
Dual Timer Reversing Rear Control Box Assembly
Illus. No.
Part No.
Qty.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
322812 132198 150301 882386 150103 151001 153002 152004 132430 150103 151001 120701 150008 151000 121300 150300 ---------
1 1 2 1 2 2 1 1 1 2 2 1 2 2 3 2 -
---
322809 150301
1 4
44
Description Back Electrical Box Component Plate Reversing Timer 24v 50/60 Hz #8-18 x 7/16” Phillips Pan Head TEK Screw Reversing Contactor (208/230/240v, 50/60 Hz) 24v Coil #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 5/16-18 Lock Washer 5/16-18 Hex Nut Impellor Contactor (208/230/240v, 50/60 Hz) 24v Coil #8-32 x 3/4” Phillips Round Head Machine Screw #8-32 Pal Nut 4-Position Terminal Block #6-32 x 1-1/4” Slotted Round Head Machine Screw #6-32 Pal Nut Open/Closed Bushing #10 x 1/2” Hex Washer TEK Screw Transformer (refer to Transformer Listings on page 47 and page 48) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16” Phillips Pan Head TEK Screw...Not Illustrated American Dryer Corporation
450302-6
Outer Top / Back Guard Assemblies
Illus. No. 1 2 3
Part No.
Qty.
322809 150301 314421
1 4 1
314422
1
314411
1
4 5 6
150301 150301 801577 312533
7 10 1 1
7 8 9
314523 150301 103500
1 13 4
450302-6
Description Back Electrical Box Cover #8-18 x 7/16” Phillips Pan Head TEK Screw Top Back Guard (gas models Only) (for models mfd. as of April 20, 1998) Top Back Guard (electric models Only) (for models mfd. as of April 20, 1998) Top Back Guard (for models mfd. prior to April 20, 1998) No Top Back Guard on Steam Models #8-18 x 7/16” Phillips Pan Head TEK Screw #8-18 x 7/16” Phillips Pan Head TEK Screw Outer Top (electric models Only) Outer Top (gas models Only) No Outer Top on Steam Models Bottom Back Guard (plain) #8-18 x 7/16” Phillips Pan Head TEK Screw Leveling Legs Telephone: (508) 678-9000 / www.adclaundry.com
45
46
SUPER AD-50 kW
Volt
P h ase
Wire
Oven Assembly
Element Qty.
Oven Wire
kW
Part #
Terminal Lug
Qty.
Siz e
Part #
Qty.
Part #
B u s B ar
Oven Relay
121011
C at #
Part #
48
208
3Ø
3 or 4
881624
6
8
120051
5
#4
133300
6
121010
1
DPA63
131369*
48
240
3Ø
3
--
--
--
--
--
--
--
--
--
--
--
--
48
380
3Ø
3 or 4
--
--
--
--
--
--
--
--
--
--
--
--
48
416
3Ø
3 or 4
--
--
--
--
--
--
--
--
--
--
--
--
48
460/480
3Ø
3 or 4
--
--
--
--
--
--
--
--
--
--
--
--
42
208
3Ø
3 or 4
824092
6
7
120034
5
#6
133200
6
121010
1
DPA63
131369*
American Dryer Corporation
240
3Ø
3
881630
6
7
120035
5
#2
133302
5
121012
1
GEAJ
131385
42
380
3Ø
3 or 4
--
--
--
--
--
--
--
--
--
--
--
--
42
416
3Ø
3 or 4
--
--
--
--
--
--
--
--
--
--
--
--
42
460/480
3Ø
3 or 4
--
--
--
--
--
--
--
--
--
--
--
--
40
208
3Ø
3 or 4
--
--
--
--
--
--
--
--
--
--
--
--
40
240
3Ø
3
--
--
--
--
--
--
--
--
--
--
--
--
40
380
3Ø
3 or 4
--
--
--
--
--
--
--
--
--
--
--
--
40
416
3Ø
3 or 4
824922
6
6.6
120027
4
#6
133200
6
121010
1
DFAJ
131361
40
460/480
3Ø
3 or 4
--
--
--
--
--
--
--
--
--
--
--
--
36
208
3Ø
3 or 4
824921
6
6
120015
4
#2
133302
8
121012
1
GEAJ
131385
36
240
3Ø
3
824920
6
6
120014
4
#2
133302
6
121010
1
FE A J
131375
36
380
3Ø
3 or 4
--
--
--
--
--
--
--
--
--
--
--
--
36
416
3Ø
3 or 4
824921
6
6
120015
4
#2
133302
3
121012
1
DFAJ
131361
36
460/480
3Ø
3 or 4
824920
6
6
120014
4
#2
133302
6
121010
1
C EAJ
131357
30
208
3Ø
3 or 4
824917
6
5
120012
3
#4
133300
5
121012
1
DPA43
131357
30
240
3Ø
3
824934
6
5
120013
3
#4
133300
5
121012
1
EEAJ
131369
30
380
3Ø
3 or 4
824976
6
5
120000
4
#8
133100
6
121010
2
FE A J
131375
30
416
3Ø
3 or 4
824949
6
5
120012
4
#8
133100
6
121010
2
DPA43
131357
30
480
3Ø
3 or 4
824955
6
5
120013
4
#8
133100
6
121010
2
DPA43
131357
44
460
3Ø
3
824003
8
6
120052
4
#2
133302
6
121010
1
D EAJ
131352
450302-6
* Quantity of two required for this oven.
NOTE: Information not listed was not available at time of printing contact factory.
Electric Oven Chart
42
Telephone: (508) 678-9000 / www.adclaundry.com
He at
Gas Ste am
Voltage
Wire Se rvice
Ste pdown Trans forme r Part No.
Control Voltage Part No.
208- 240
3 or 4
---
141403
380
3
132059
141403
380
4
132059
141403
416
3
132062
141403
416
4
132062
141403
460/480
3
132053
141403
460/480
4
132053
141403
575
3
132050
141403
Transformer Listing Gas / Steam Dryers
450302-6
Supe r AD-50
47
Transformer Usage Listing For Electric Dryers
SUPER AD-50 Kw
Volt
Phase
Wire
Stepdown Transformer Part No.
Control Voltage Transformer Part No.
48
208
3Ø
3 or 4
--
132070
48
240
3Ø
3
--
132070
48
380
3Ø
3 or 4
132059
132070
48
416
3Ø
3 or 4
132062
132070
48
460/480
3Ø
3 or 4
132053
132070
42
208
3Ø
3 or 4
--
--
42
240
3Ø
3
--
--
42
380
3Ø
3 or 4
--
--
42
416
3Ø
3 or 4
--
--
42
460/480
3Ø
3 or 4
--
--
40
208
3Ø
3 or 4
--
--
40
240
3Ø
3
--
--
40
380
3Ø
3 or 4
132059
141403
40
416
3Ø
3 or 4
132062
141403
40
460/480
3Ø
3 or 4
132053
141403
36
208
3Ø
3 or 4
--
132070
36
240
3Ø
3
--
132070
36
380
3Ø
3 or 4
132059
141403
36
416
3Ø
3 or 4
132062
141403
36
460/480
3Ø
3 or 4
132053
141403
30
208
3Ø
3 or 4
--
132070
30
240
3Ø
3
--
132070
30
380
3Ø
3 or 4
132059
141403
30
416
3Ø
3 or 4
132062
141403
30
480
3Ø
3 or 4
132053
141403
NOTE: Information not listed was not available at time of printing contact factory. 48
American Dryer Corporation
450302-6
Microprocessor Coin Acceptors Listing NOTE: Coin acceptors listed include optical switch (ADC Part No. 137056 Greenwald). Coin acceptors listed include optical switch (ADC Part No. 881143 Hanke).
Single Coin* ADC Part No.
Nation
882689
United States
125100
U.S. and Canada
125107 881768 881604 125103 125121 125133
Australia Australia Japan ----Hong Kong
Description 25¢ Hanke Optic Coin Acceptor (for models mfd. as of July 26, 2000) 25¢ Greenwald Optic Coin Acceptor (for models mfd. prior to July 26, 2000) 20¢ Greenwald Australian Optic Coin Acceptor $1 Hanke Australian Optic Coin Acceptor 100 Yen Hanke Optic Coin Acceptor 0.882 Greenwald Token Optic Coin Acceptor 0.800 Greenwald Token Optic Coin Acceptor $1 Hong Kong Optic Coin Acceptor
Dual Coin* ADC Part No.
Nation
881508 881842 881542 881846 881541
U.S. and Canada Canada United Kingdom France Netherlands
Description 10¢/25¢ Hanke Dual Optic Coin Acceptor 25¢/$1 Hanke Dual Optic Coin Acceptor 1£/20 Pence Hanke Dual Optic Coin Acceptor 2/5 French Franc Hanke Dual Optic Coin Acceptor 25¢/1 Hanke Guilder Dual Optic Coin Acceptor
* Consult factory for coin acceptors not listed.
450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
49
Additional Parts Available
Part Number
50
Description
112039
“Black/White/Green Ground” Label
112280
“Clean Lint Screen” Label
112534
“Phase 5 Non-Coin Program Location Summary” Label
112533
“Phase 5 Coin Program Location Summary” Label
114001
“CAUTION – Exhaust/Lint Screen” Label
114006
“WARNING – Fire Hazards” Label
120800
1/4” In-Line Connector
120802
Red Butt Connector
120902
#74B Wire Nut
120903
Crimp-on Wire Nut
121006
#10 Insulated Ring Terminal
121014
1/4” Insulated (Female) Terminal
121026
Tab Receptacle Combination
121499
5-1/2” Harness Tie
121500
8” Harness Tie
121503
Harness Tie Mounting Clip
122804
Manometer (water column test gauge)
404500
Almond Brush-in-Cap Bottle Touch-Up Paint
404502
White Brush-in-Cap Bottle Touch-Up Paint
404506
Beige Brush-in-Cap Bottle Touch-Up Paint
404507
Cornflower Blue Brush-in-Cap Bottle Touch-Up Paint
American Dryer Corporation
450302-6
Notes ____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________________
450302-6
Telephone: (508) 678-9000 / www.adclaundry.com
51
ADC Part No. 450302
6 - 06/19/14
