Transcript
Product Information Crash Data Retrieval System CDR® System Version 15.0 Software and Hardware
What’s new for CDR Version 15.0?
and 2015 BMW i3 & i8 require this adapter. In the future, other manufactures including Audi will also require the
Bosch is pleased to announce the release of the new CDR
ICDR 500 for imaging EDR data directly from their ECUs.
500 Adapter and version 15.0 software. `` BMW ACM Cable (ID 807) for FlexRay ECUs Refer to the CDR Help File for more detailed coverage information.
P/N: F00K108788 - Use this new cable to connect the BMW / MINI FlexRay ECUs to the CDR 500 adapter for direct-to-module EDR imaging.
New Vehicle Coverage `` Alfa Romeo (MY2015, US/Canada markets) –– 4C
`` Fiat (MY2015, US/Canada markets) –– 500L
`` Nissan (MY2015/2016, US/Canada markets) –– 2015 NV Cargo & Passenger Van –– 2016 GT-R –– 2016 MICRA (Canada only)
Minimum PC Hardware Requirements To install and run the CDR software, your PC must meet the minimum hardware requirements listed below: –– Processor Speed: 1GHZ or faster –– RAM: 256MB or more –– Disk Space: 100MB or more –– Video Resolution: 1028 x 768 or higher –– 2 open USB ports (flash drive enabled) Supported Operating Systems This version of CDR software is currently supported on the following US Windows® operating systems: –– Windows XP® (Home and Pro for PCs, 32 & 64 bit) –– Windows Vista® (32 & 64 bit)
`` RAM (MY2015, US/Canada markets) –– ProMaster® City
–– Windows 7® (32 & 64 bit) –– Windows 8® (32 & 64 bit) Software Compatibility with the CDR Interface Module This software version is compatible only with the blue
New Hardware
and green metal CDR interface module marked with a
`` CDR 500 Adapter Kit (US/Canada markets)
module (black plastic or blue units without the CAN plus
P/N: 1699200114 - This new kit includes the new CDR 500 adapter and cables. It is needed when imaging EDR data directly from ECUs with FlexRay communications. Initially, applications such as the 2014+ Hardtop MINI
CAN plus logo on its label. Other versions of the CDR logo) are not supported and can cause the software not to function as intended. To purchase a current CDR Interface Module (P/N: F00K108954), please contact your local CDR Sales Representative.
Product Information Is Your CDR System Hardware Up to Date? To take full advantage of this new software version, you need to obtain the new CDR Cables released up through CDR version 15.0. You also need to make sure your CDR hardware is up to date. If your CDR Tool has not been updated recently, refer to the Checklist for v15.0 which can be found on the Bosch Diagnostics CDR website located at http:// www.boschdiagnostics.com/testequipment/CDR/Pages/ CDRHome.aspx. Contact your CDR Sales Representative if you have any questions about the CDR products or you need to order new hardware or a software subscription.
`` CDR Sales Support for US and Canada Crash Data Group Tel:
1-800-280-7940
Email:
[email protected] Website:
http://www.CDR-system.com
`` CDR Sales Support for Africa IbB Engineering GmbH Tel:
+49 6534 949930
Email:
[email protected] Website:
www.ibb-engineering.org
`` CDR Sales Support for Australia and New Zealand Bosch Diagnostics Tel:
+61 3 9544 6222
Email:
[email protected] Website:
www.bosch.com.au
`` CDR Sales Support for Europe and Middle East asDARTS InH. Andreas Huber Tel:
+49 721 68033932
Email:
[email protected] Website:
www.asDARTS.com
IbB Engineering GmbH Tel:
+49 6534 949930
Email:
[email protected] Website:
www.ibb-engineering.org
`` Bosch Direct Inquiries For Inquires and Information Direct from Bosch Email:
[email protected] Website:
http://www.boschdiagnostics.com/
testequipment/CDR
© 2015 Bosch Automotive Service Solutions. All rights reserved. BOSCH and CDR are registered trademarks of Robert Bosch GmbH.
