Preview only show first 10 pages with watermark. For full document please download

Cei Bitmaxx Usb 3 Vision Extended Distance

   EMBED

Share

Transcript

Bitmaxx USB3 Vision Features: * Extended distance up to 25 meters * USB 3.0 Vision systems compatible (only) * High Flex configurations available * Cost effective modular design * EZ install - Plug-N-Play * Superspeed (5Gbps) * Improved serviceability * No external power supply required * Provides for a variety of exit options @ camera side (sold separately) * Adaptable to USB Type-B or Micro-B * Standard 2-year warranty Technical Specifications: * Output Voltage: 5 VDC * Output Current: 1.5 A * Operating Range: -20 degrees C to +80 degrees C * Minimum Bend Radius: 50mm * Coaxial Design * Not compatible with USB2.0 System Requirements: * PCIe Gen2 or later slot for USB3 Host Controller (Included) Page 1 of 2 W W W. S T E M M E R- I M A G I N G . C O M Bitmaxx USB3 Vision Kit Includes: KL-CEI1-11/2014 ∙ Subject to technical change without notice. No liability is accepted for errors which may be contained in this document. 1 Bitmaxx cable for USB3 Vision 1 PCIe USB3 host controller with installation CD and hardware Installation Instructions: 1.) Install the USB3 host controller card 2.) Attach cable host end (Fig A) to USB3 host controller port 3.) Attach pigtail (Fig B) to an adjacent USB2 or USB3 port 4.) Connect USB3 cable between the device end and the camera * Recommended cable length of 1 meter or less (sold separately) 5.) Your Bitmaxx cable for USB3 Vision is ready for use. FIG. B USB3 host controller card FIG. A Page 2 of 2 Imaging is our passion. www.stemmer-imaging.com STEMMER IMAGI NG Head Office Gutenbergstraße 9 - 13, D-82178 Puchheim Phone: +49 89 80902-0, [email protected]