Transcript
Ceiling lift Pro XL with optional ceiling plate
Ceiling lift Pro / Pro XL Professional low-noise ceiling lift for large projectors The ceiling lifts Pro and Deckenlift Pro XL are very easy to mount. An integrated spiral cable guide protects the mains cable as well as the control and data cables when the lift is in operation. One-time setting of the retraction and extension positions takes place for all lifts using the optional programming unit, see table on the following page. With the programming (7465000120) for SMI motors a total of 4 stop positions can be programmed, e. g. for 2 different projector positions and a servicing position.
Ceiling lift Pro series • For projectors with a weight up to 30 kg • Super flat universal projector holder, tiltable
Ceiling lift Pro XL series • For large, heavy projectors with a weight up to 50 kg • A keystone correction via lens shift is neccessary
14
Subject to technical alterations, as well as to changes of the design and the colour
Illustration for installation can be found under: http://shop.kindermann.de/erp/webshop/ navigationPath/100000/110000/110020 or scan this QR-Code
Ceiling lift Pro / Pro XL 120 - 350 cm • Max. lifting range: 350 cm • The integrated safety circuit stops the lift when hitting an obstacle in the downward direction • Spiral cable guide for cable protection (we recommend to have all projector cables inserted during the installation of the unit) • SMI motor, maintenance free (as of Pro 250 and all Pro XL models) • Pre-mounted, adjustable 230 V safety switch, e. g. for switching off the power when the projector is lifted • The Pro XL lifts are equipped with an additional safety belt for maximum safety
Note! • For technical data of ceiling lift Pro / Pro XL, see page 20. • Further accessories for the control and operation of the ceiling lifts, see page 23.
Ceiling lift Pro
Accessories for ceiling lift Pro Illustration
Model
Specification
T profile
For holding the cutout panelling.
Ref. No. 7465000020
Note: size of cutout changes to 752 x 552 mm
Set of longer spider arms for large projectors
e. g. for Panasonic EX/EW/EZ/DZ series, Sony FH series (as of FH60) max. distance of the drill-holes on the projector: 493 mm
5883000001
Accessories for ceiling lift Pro XL Illustration
Model
Specification
Ceiling plate with T profile
IIntegration of the ceiling cutout (95.6 x 75.2 cm) white, RAL 9003
7465000110
Ref. No.
Bracket for Epson Z series
metallic silver, RAL 9006
6360000020
Accessories for ceiling lift Pro and Pro XL Illustration
Model
Specification
Programmi Programming unit ereinheit Standard
For Pro models: 7465 000 050/51/52 and ceiling lift Compact² With 4-pin connection cable and 230 VAC Schuko plug for programming the stop positions; reusable
7466000100
Programming unit Standard for SMI motor
For Pro models: 7465 000 053/54/55 and Pro XL: 7465 000 10x With 5-pin connection cable for programming the stop positions; reusable
7466000105
Programming unit Standard for SMI motor (GS)
For Pro models: 7465 000 063/64/65 and Pro XL: 7465 000 15x With 5-pin connection cable for programming the stop positions; reusable
7466000106
Programming unit Electronic for 4 positions with SMI motor (up, 2 projection positions, lower servicing position)
Consisting of: SMI control unit, SMI interface, programming unit, power supply 24 VDC, 1 A
7465000120
Subject to technical alterations, as well as to changes of the design and the colour
Ref. No.
15
Technical data - Kindermann ceiling lifts Ceiling lift Compact2 80 / 120 Ceiling lift Compact2 80 7466 000 150 up to 80 cm for units < 41 cm (incl. cable): 6.5 cm + projector height, min. 12 cm
Ref. No. Lifting range Installation height
Projector mounting Weight of lift Max. projector size Max. projector weight Voltage Required ceiling space Cutout of ceiling Ceiling plate Colour Length of the signal cable in the lift
Ceiling lift Compact2 120 7466 000 151 up to 120 cm for units < 41 cm (incl. cable): 9 cm + projector height, min. 14 cm
for units from 41 cm up to 58 cm (incl. cable): for units from 41 cm up to 58 cm (incl. cable): 13 cm + projector height 15 cm + projector height universal projector mount (fixing points between ø 75-370 mm) 24 kg 26 kg 58 x 56 cm (BxT), incl. space for cables 20 kg 230 V~, 50 Hz; 4-pin connection (up/down/PE/N) 70 x 75 cm 60 x 60 cm optional powder-coated, white, RAL 9003 approx. 2.5 m approx. 3.5 m
Ceiling lift Pro Ref. No. Ref. No. with GS Lifting range Installation height Projector mounting Stop positions Weight of lift Max. projector size
Ceiling lift Pro 120 7465000050 up to 120 cm
Ceiling lift Pro 165 7465000051 up to 165 cm
Ceiling lift Pro 300 7465000054 7465000064 up to 300 cm
Ceiling lift Pro 350 7465000055 7465000065 up to 350 cm
210 mm + projector height
240 mm + projector 270 mm + projector 310 mm + projector 340 mm + projector height height height height with screws (M3/M4/M5/M6) on projector bottom, fixing points between ø 138-378 mm 2 4 35 kg 37 kg 38 kg 41 kg 50 x 65 x 20 cm, incl. cable
370 mm + projector height
33 kg
Ceiling lift Pro 210 7465000052 up to 210 cm
Max. projector weight
Ceiling lift Pro 250 7465000053 7465000063 up to 250 cm
43 kg
30 kg
Voltage Power consumption
230 V ~/ 50 Hz 220 W
Connection Required ceiling space
5-pin (up/down/L/N/PE) for SMI motor
4-pin (up/down/PE/N) 69 x 49 cm
Cutout of ceiling Ceiling plate Colour Length of the signal cable in the lift
approx. 5.5 m
approx. 6.5 m
74 x 54 cm adjustable steel plate powder-coated, metallic silvergrey, RAL 9006 approx. 7.5 m approx. 8.5 m
approx. 9.5 m
approx. 10 m
Ceiling lift Pro XL Ref. No. Ref. No. with GS Lifting range Installation height Projector mounting Stop positions Weight of lift Max. projector size Max. projector weight Voltage Power consumption Connection Required ceiling space Cutout of ceiling Ceiling plate Colour Length of the signal cable in the lift
18
Ceiling lift Pro XL 120 Ceiling lift Pro XL 165 Ceiling lift Pro XL 210 Ceiling lift Pro XL 250 Ceiling lift Pro XL 300 Ceiling lift Pro XL 350 7465000100 7465000101 7465000102 7465000103 7465000104 7465000105 7465000150 7465000151 7465000152 7465000153 7465000154 7465000155 up to 120 cm up to 165 cm up to 210 cm up to 250 cm up to 300 cm up to 350 cm min. 56 cm, with ceiling plate Projector standing, attachment via threaded sleeves in the housing bottom in 3 movable carrying rails 4 56 kg 58 kg 60 kg 62 kg 64 kg 66 kg 75 x 62 x 33 cm, incl. cable max. 50 kg 230 V~/ 50 Hz 330 W 5-pin (up/down/L/N/PE) for SMI motor 69 x 49 cm 98 x 77.6 cm Ceiling plate (steel) with T profile, powder-coated, white, RAL 9003 – Ref. No. 7465000110 (accessory) powder-coated, metallic silvergrey, RAL 9006 approx. 6 m
approx. 7 m
approx. 8 m
Subject to technical alterations, as well as to changes of the design and the colour
approx. 9 m
approx. 10 m
approx. 11 m
Accessories for all ceiling lifts and ceiling mirrors Illustration
Model
Specification
Up/down switch
230 VAC, 2-pin for up/down, on-wall mounting, Busch-Jaeger Reflex Si, white
5944000002
Ref. No.
Key switch
230 VAC, 2-pin for up/down, on-wall mounting
5944000001
Radio remote control for ceiling lifts and screens
Incl. on-wall receiver and mobile sender, radio frequency: 433 MHz
5699000020
One receiver in a room can be controlled together or independently by up to 20 senders (depending on programming)
IR remote control for ceiling lifts and screens
Incl. on-wall receiver, touch button (with cable) and mobile sender
5699000021
Motor control unit with relay inputs for ceiling lifts and screens
For up/down about media control
5699000022
3-fold relay box small signal
3 relay exchange contacts, 12 VDC with separated control inputs, for potential separation of e. g. open-gate outputs of the Neets I/Os. The first relay changer is applied with RC links to operate the motor control unit 5699 000 022 with only one I/O.
5699000025
Dimensions: 82 x 82 x 38 mm (LxBxH)
Universalsteuerung HR-4P
4 separated contact or current sensor inputs, recognises status changes to the inputs and initiates a previously defined RS232 or IR command, e. g. closing of the mirror flap etc.
4100000018
• • • •
Inputs: 4 I/Os (euroblock) Output: RS232 9-pin SubD plug Input/Output: IR (3.5 mm jack, socket) Up to 10 RS232 and 32 IR commands can be programmed individually via Windows software • Plastic housing, black, dimensions: 66 x 67 x 28 mm (BxHxT) • Power supply 5VDC/2,6 A • Supplied with power supply and RS232 cable (1.8 m)
Subject to technical alterations, as well as to changes of the design and the colour
21
